Yamaha MOTIF XS6 Manuale del proprietario

Tipo
Manuale del proprietario

Questo manuale è adatto anche per

MOTIF XS Editor VST Owner’s Manual 1
Contents
What is the MOTIF XS Editor VST? .........................................2
Data Structure of the MOTIF XS Editor VST...........................3
Starting the MOTIF XS Editor VST ..........................................4
An Example of MOTIF XS Editor VST in Use..........................7
MOTIF XS Editor VST Window...............................................13
Basic Operations....................................................................35
Menu ........................................................................................37
Troubleshooting .....................................................................54
Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for
your personal use.
The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.
Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without
the written consent of the manufacturer.
•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot
be held responsible for the results of the use of this manual and the software.
The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat
different from the screens which appear on your computer.
The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their
respective companies.
Click on the red-colored text to jump to the related item in this manual.
© 2008 Yamaha Corporation. All rights reserved.
This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not,
please refer to the owner’s manual which came with your Windows/Macintosh software before using the MOTIF XS
Editor VST.
For information about hardware requirements, the interconnection of devices and the installation of the MOTIF XS
Editor VST software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI
device.
MOTIF XS Editor VST
Owner’s Manual
MOTIF XS Editor VST
Owner’s Manual
What is the MOTIF XS Editor VST?
MOTIF XS Editor VST Owner’s Manual
2
What is the MOTIF XS Editor VST?
MOTIF XS Editor VST is a convenient tool which lets you edit and save the various parameters of your MOTIF
XS tone generator. These include Voice and Mixing parameters (edited in the Voice or Mixing mode of the
MOTIF XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-understand
graphical interface, you can edit various parameters of the MOTIF XS right from your computer—using the
mouse to adjust the virtual knobs, sliders, and buttons and entering values from the computer keyboard.
Finally, all the changes you have made can be saved to your computer or transmitted to the MOTIF XS
instrument.
The MOTIF XS Editor VST, based on the “VST3 technology” by Steinberg, works as a VST3 plug-in with
Cubase series 4.5 or later (DAW application). The MOTIF XS Editor VST also works as the same way as other
VST instrument software, allowing you to save the edited settings of the MOTIF XS, or use them for another
project. In addition, you can handle the MOTIF XS Voices in the Media Bay window in Cubase when using
the MOTIF XS Editor VST with Cubase 4.5 or later, allowing you to search for, listen, and play the MOTIF XS
Voices within Media Bay in Cubase. The MOTIF XS Editor VST provides a comprehensive and seamless
music production environment—making the use of hardware and software both easier and much more
efficient.
Data Structure of the MOTIF XS Editor VST
MOTIF XS Editor VST Owner’s Manual
3
Data Structure of the MOTIF XS Editor VST
The MOTIF XS Editor VST lets you create the following data and save them as a single file (extension: X0E).
Current Global data (latest status of edited global parameters)
Current data in the Voice mode (latest status of edited Voice)
Current data in the Song/Pattern mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)
User Voice data (consisting of three Normal Voice Banks and one Drum Voice Bank)
Current settings includes the latest settings of the Common and Element parameters for the Voice last assigned to
each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for
each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The MOTIF
XS Editor VST lets you edit parameters (including Element parameters) of the Voice assigned to each Part and
save the latest edit status as a file without storing it as a User Voice or a Mixing Voice. This means that you can
easily recall the latest status of the previous edit simply by opening the file.
n The MOTIF XS Editor VST handles the Global data which includes some of the parameters shown on the “G” row in the
Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 21 and 24).
The diagram illustrated below indicates the structure of the data created via the MOTIF XS Editor VST, the
structure of the data stored in the internal memory of the MOTIF XS instrument and the relationship between
those two types of data.
*1 When the MOTIF XS instrument is connected to the computer properly with the ONLINE status, editing a parameter on the MOTIF XS Editor VST affects the same parameter on the
MOTIF XS itself, and vice versa.
*2 The Store Voice operation on the Editor will store the Voice data to the memory of the MOTIF XS instrument as well as the memory of the Editor.
*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the MOTIF XS instrument.
MOTIF XS Editor VST (VST3 Plug-in)
Current Global data
Current data in the Voice mode
Current data in the Song or
Pattern mode
• Multi Common data
Part Voice data
(16 Voices)
Mixing Voice data
(16 Voices)
Store Voice
*2
(page 49)
Store Voice
*2
(page 49)
User Voice data
• Normal User 1 (128 Voices)
• Normal User 2 (128 Voices)
• Normal User 3 (128 Voices)
• Drum User (32 Voices)
Editor file
(Extension: .X0E)
Data sync
*1
Data sync
*1
Data sync
*1
Current Global data
Current data in the Voice mode
Current data in the Song or
Pattern mode
• Multi Common data
Global data
User Voice data
• Normal User 1 (128 Voices)
• Normal User 2 (128 Voices)
• Normal User 3 (128 Voices)
• Drum User (32 Voices)
Part Voice data
(16 Voices)
Mixing data
• Multi Common data
Mixing Voice data
(16 Voices)
Store Voice
*2
(page 49)
Store Voice
*2
(page 49)
Store Voice
*2
(page 49)
Store Mixing
*3
(page 50)
Store Global
*3
(page 49)
MOTIF XS instrument
Store Voice
*2
(page 49)
Project file of the DAW application (computer)
Starting the MOTIF XS Editor VST
MOTIF XS Editor VST Owner’s Manual
4
Starting the MOTIF XS Editor VST
Install the driver (USB-MIDI driver, AI Driver, mLAN Driver/mLAN Tools, or Yamaha Steinberg FW Driver), and
MOTIF XS Editor VST by following the respective Installation Guides. After making the required connection
and setting the MIDI IN/OUT parameter to “USB” or “mLAN” in the Utility mode, follow the instructions below
to start the MOTIF XS Editor VST.
This example describes the operation steps for Cubase 4.5 with the device connected to a computer via an
IEEE1394 (FireWire) cable.
n For details about connection between the MOTIF XS and a computer, refer to the Owner’s Manual of the MOTIF XS.
1. Open the VST Instrument window via [Devices] [VST Instruments] in the DAW
application menu.
2. Click the Instrument Slot in the VST Instrument Rack, then select [External] [MOTIF XS
VST].
3. When the dialog box asking “Do you want to create a MIDI track assigned to plug-in
“MOTIF XS VST”?” appears, click [Create].
A MIDI track will be created and the MOTIF XS Editor VST window will appear.
Starting the MOTIF XS Editor VST
MOTIF XS Editor VST Owner’s Manual
5
4. Click the Output Setup button at the right side of the Edit button ( ) in the VST
Instrument Rack, then select [Activate All Outputs].
After this operation, the MOTIF XS1-8 Busses appear in the project window of the DAW application.
5. Call up the Editor Setup window in the MOTIF XS Editor VST via [File] [Editor Setup].
6. Select “mLAN/1394” at the [mLAN/1394]/[USB] checkboxes.
7. Select “MOTIF XS6 (MOTIF XS7, or MOTIF XS8)” at the [mLAN Device] column.
8. Select “MOTIF XS” at the [MIDI Out] column.
9. Click [OK] button at the bottom.
10. Call up the VSTi Setup window in the MOTIF XS Editor VST via [File] [VSTi Setup].
11. Click the [Auto] button then all the audio ports are assigned automatically.
12. Click the [OK] button at the bottom.
13. If the MOTIF XS Editor VST is “OFFLINE, click the [ONLINE/OFFLINE] button to go
“ONLINE.
Starting the MOTIF XS Editor VST
MOTIF XS Editor VST Owner’s Manual
6
14. In Quick Set Up, select [Rec on PC] in the MIDI button group, and [With PC] in the
mLAN Monitor button group.
n Step 5 through 12 are required when starting MOTIF XS Editor VST for the first time. These steps are saved in
the editor and do not need to be repeated each time it is started.
n The MOTIF XS Editor VST launch procedure is the same as for other VST instruments. Refer to the manual
supplied with your DAW software for information on other launch procedures.
An Example of MOTIF XS Editor VST in Use
MOTIF XS Editor VST Owner’s Manual
7
An Example of MOTIF XS Editor VST in Use
There is no single way to use the many components in the MOTIF XS Editor VST. Your editing needs and
preferences may differ; however, the following example gives you a simple step-by-step guide in how to use
the MOTIF XS Editor VST. As an example, this section explains how to edit a Voice in the Voice mode, edit a
Mixing program in the Song mode, then store the edited data to the memory of the MOTIF XS instrument and
save the final results of your editing to a file.
n If the [Song] or [Pattern] indication (at the top left of the display) is on, perform the instructions below from step 1. If the
[Voice] indication is on, perform the instructions below from step 2.
1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left
of the display).
If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync
window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you
should proceed to step 3.
2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]
indication is set to [OFFLINE].
3. On the Auto Sync window, set communication-related parameters such as Input Port,
Output Port and Device Number in the Data Port section, then set the direction of Data
Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.
When you want to use the settings on the MOTIF XS itself as starting data for editing, set the boxes of
Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the
computer. To use the settings on the MOTIF XS Editor VST as starting data, set both Global, Current and
Voice to the opposite, so that the arrow indicates data flow from the computer to the keyboard. For
details, see page 40.
CAUTION
Keep in mind that when you set Global, Current and Voice to On, enable data sync from the computer to the MOTIF XS
(instrument), and then click the [Start] button at the bottom, this operation transmits these types of data currently on the
Editor to the MOTIF XS itself, automatically overwriting and erasing all the corresponding data already existing on memory of
the MOTIF XS instrument. When you want to use the settings on the MOTIF XS itself as starting data for editing, set the
boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data flows from the instrument to the computer.
CAUTION
Make sure to set the desired data transfer direction in order to avoid data loss.
An Example of MOTIF XS Editor VST in Use
MOTIF XS Editor VST Owner’s Manual
8
4. From the Auto Sync window, click [Start] at the bottom.
The data synchronization will be started if the Port settings are correct. As soon as data synchronization
is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE
indication automatically. In this ONLINE status, editing a parameter on the MOTIF XS Editor VST affects
the same parameter on the MOTIF XS itself, and vice versa.
5. Edit the Voice in the Voice mode.
5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the
VOICE LIBRARY window.
5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to
the current Part.
You can confirm the sound of the selected Voice by clicking any note on the virtual keyboard or the
MOTIF XS keyboard.
5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY
window.
You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of
the window. By executing this operation, the Voice selection is reset to the original status and the VOICE
LIBRARY window closes.
CAUTION
When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store the
edits, make sure to store the Voice by using the Store window (page 49) before changing the Voice.
An Example of MOTIF XS Editor VST in Use
MOTIF XS Editor VST Owner’s Manual
9
5-4 Edit the Voice parameters as desired.
Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.
To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the
MOTIF XS keyboard.
To make detailed settings of the selected Voice, click the arrow button at the top of the right panel
next to the main window to call up the Detailed Parameter section.
6. Store the edited settings as a User Voice, as necessary.
6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 49).
6-2 Select a Voice Bank from the following list:
• Normal User 1
• Normal User 2
• Normal User 3
• Drum User
n Normal User 1 – 3 are shown in the Store window when editing the Normal Voice while Drum User is shown in
the Store window when editing the Drum Voice.
An Example of MOTIF XS Editor VST in Use
MOTIF XS Editor VST Owner’s Manual
10
6-3 Open the selected Bank, select the desired number as destination, then enter the name
of the Voice in the box at the top of this window.
6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.
Performing this operation will store the Voice data to the User Voice Bank in the MOTIF XS instrument as
well as that within the Editor.
CAUTION
When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument) will be
overwritten. Select the destination Voice number carefully to prevent important data from being erased accidentally.
n You can store the settings of the parameters in the “G” row by clicking [Store Global] under [Edit] in the menu
bar.
7. Edit the Mixing parameters in the Song mode.
This section explains how to edit a Mixing program in the Song mode.
7-1 Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern]
indication.
The Auto Sync appears automatically during ONLINE status.
7-2 From the Auto Sync window, click [Start] at the bottom.
Data synchronization will be started if the Port settings are correct. As soon as data synchronization is
completed, the Auto Sync window is closed.
An Example of MOTIF XS Editor VST in Use
MOTIF XS Editor VST Owner’s Manual
11
7-3 Edit the parameters of the Mixing and Voice assigned to each Part.
If you want to change the parameter values from the original ones of the selected Song or Pattern, click
(drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/
Multi section and “1” – “16” in the Part section.
To confirm how the parameter edit affects the Voice sound, click any note on the virtual keyboard.
To make detailed settings of the selected Multi, click the arrow button at the top of the right panel
next to the main window to call up the Detailed Parameter section.
n The MOTIF XS Editor VST lets you edit the Voice parameters in the Song or Pattern mode as well as Voice
mode. In the Voice mode, you can edit only the selected Voice. In the Song or Pattern mode, on the other
hand, you can edit the parameters of the Voice assigned to each Part as well as the Mixing parameters. The
edited Voice can be stored to the same Voice Bank as a User Voice regardless of the mode used for editing.
An Example of MOTIF XS Editor VST in Use:
MOTIF XS Editor VST Owner’s Manual
12
8. Store the edited Voice or a Mixing, as necessary.
8-1 On the MOTIF XS instrument, press the [STORE] button to call up the Mixing Store
window, select the destination, then press the [ENTER] button to store the edited Mixing.
For details, refer to the Owner’s Manual of the MOTIF XS.
n You can store the edited Mixing also by selecting [Store Mixing] under [Edit] in the menu bar. Note that this
operation does not allow you to select the Song as destination and the edited Mixing will be stored to the
currently selected Song.
8-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in
the menu bar to call up the Store window (page 49) then store the Voice via the same
operations as in steps 6-1, 6-2, 6-3 and 6-4.
9. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a file
(extension: *.X0E).
All the settings you made and the Voice data you stored to the User Banks will be saved as a single file
(extension: X0E). When you open this file next time to call up the Auto Sync window, click [Start] to
synchronize the status of the parameter settings between the MOTIF XS Editor VST and the MOTIF XS
instrument.
The MOTIF XS Editor VST data can be saved into a project file of the DAW application.
MOTIF XS Editor VST Window: Overall section
MOTIF XS Editor VST Owner’s Manual
13
MOTIF XS Editor VST Window
Overall section
1 File, Edit, Bulk, Help
Refer to page 37.
2 Voice/Song/Pattern mode
Determines the mode of the MOTIF XS, Voice, Song or Pattern. As soon as “Voice,” “Song” or “Pattern” is
selected here, the mode of the MOTIF XS instrument changes accordingly and the Auto Sync window
(page 53) opens. After setting parameters as necessary on this window, click [Start] to execute data
synchronization between the MOTIF XS Editor VST and the MOTIF XS instrument.
3 ONLINE/OFFLINE
Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is
indicated, the edited status is completely synchronized between the MOTIF XS Editor VST and the
MOTIF XS instrument, meaning that any parameter edit you make on the MOTIF XS Editor VST is
reflected in the same parameter on the MOTIF XS instrument and vice versa. When OFFLINE is selected,
editing on the MOTIF XS Editor VST will not affect the MOTIF XS instrument and vice versa even if the
MOTIF XS instrument is connected to a computer.
Note that the indication here is automatically changed according to the status of communication
between the MOTIF XS Editor VST and the MOTIF XS instrument. For example, the ONLINE status
changes automatically to OFFLINE when the cable is disconnected accidentally.
1
Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (2) described below.
Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the
MOTIF XS instrument is not properly connected to a computer.
2
This OFFLINE indication shows that the MIDI Port is set properly and the MOTIF XS is properly connected
to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you can
synchronize the settings between the MOTIF XS Editor VST and the MOTIF XS by clicking the [Start]
button. As soon as data synchronization is completed, the Auto Sync window is closed and the status of
the Editor changes from OFFLINE to ONLINE.
n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync
window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync
window.
3
This OFFLINE indication shows that the MIDI Port is not set properly or the MOTIF XS instrument is not
connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to
connect the MOTIF XS instrument to a computer, set the MIDI Port properly then click the [Start] button in
the Auto Sync window to execute data synchronization between the MOTIF XS Editor VST and the MOTIF
XS instrument. As soon as data synchronization is completed, the Auto Sync window is closed and the
status of the Editor is changed from OFFLINE to ONLINE.
1
2
3
MOTIF XS Editor VST Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor VST Owner’s Manual
14
Mixer section (when the Voice/Song/Pattern is set to “Voice”)
1 Global
This strip lets you edit the main parameters in the Voice mode, such as effect-related ones. Clicking “G”
turns this section on as illustrated below.
n When editing any of the Global parameters described below, a small square appears at the top right of the
“G” box until you save the edited data as a file. This indication is the same as the green [F] indicator
(page 26).
Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)
Edits the Master EQ parameters.
Chorus
Selects the Chorus type.
Reverb
Selects the Reverb type.
Master Effect
Tur ns the Master Effect on or off and selects the Master Effect type.
Volume
Adjust the entire volume.
2 [Voice]/[AD/mLAN Part] tab
Selects the Parts to be edited from [Voice] and [AD/mLAN Part]. The illustration below indicates that the
[Voice] tab is active.
1
3
2
Before editing
After editing
MOTIF XS Editor VST Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor VST Owner’s Manual
15
3 Voice
When the [Voice] is selected:
Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.
n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”
box until you save the edited data as a file or you store the edited data as a Voice. This indication is the same
as the blue [V] indicator (page 29).
n The MIDI monitor mark is at the left side of the “V” mark. A small red LED lights when the specific MIDI
channel receives MIDI messages.
Category, Bank, No., Voice Name
Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window
appears at the right half section, letting you select a different Voice for editing.
VOICE LIBRARY
1 Close button
Click this to close this window without applying the changes to the MOTIF XS Editor VST.
2 [Category]/[Bank] checkboxes
Click either of these boxes to determine whether the Voices listed here are divided into Category
folders or Bank folders.
Before editing
After editing
19
3
4
5
2
67
8
MOTIF XS Editor VST Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor VST Owner’s Manual
16
3 [+]/[–] buttons
Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to
close all folders.
4 Folder (Category or Bank)
Click each folder to open or close it.
5 Voices
Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When
double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the
Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by
dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-
dropping the Voice(s) to a new location.
When the Category checkbox is entered, a checkbox is shown at left of each Voice. If you enter
checkmarks to the checkboxes of your most-used or favorite Voice, you can call up a list of these
Voices on the VOICE LIBRARY by setting the [Favorites] checkbox to on.
n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as
normal on your computer OS.
n By right-clicking on Windows / <control> key + clicking on Macintosh this section and selecting a
menu, you can use the following functions.
Opening/closing all the folders
Determining whether the Voices listed here are divided into Category folders or Bank folders.
Copying/pasting
Changing the Voice name
Deleting all the checkmarks of the Favorites checkboxes at left of the Voices
Saving the VST presets
n There are two ways to save a VST preset.
Right-click (Windows) / <control> key + click (Macintosh) on the Voice Library > Save VST presets
Click the “Save a VST preset” button on the DAW application
“Save VST presets” on the right click menu allows you to save a voice of the User Bank separately.
You need to save the voice of the Preset Bank to the User Bank when you want to save the Voice of
the Preset Bank as a VST preset.
The “Save a VST preset” button on the DAW application will save all settings of the MOTIF XS Editor
VST as a VST preset.
6 Search Box
You can search for your desired Voice by inputting a keyword here.
7 [Favorites] checkbox
By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE
LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the
appropriate checkboxes (appearing only when the [Category] checkbox is entered) at the left of each
Voice.
8 [OK]/[Cancel] buttons
Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit
without applying the Voice selection.
9 Refresh
When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the MOTIF XS itself, the
name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the MOTIF
XS. If this happens, click this button to update the Voice names of the VOICE LIBRARY.
MOTIF XS Editor VST Window: Mixer section (when the Voice/Song/Pattern is set to “Voice”)
MOTIF XS Editor VST Owner’s Manual
17
EQ Lo, Mi, Hi (Part EQ)
Adjusts the equalizer settings for the current Voice.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using
the graphic knobs.
Volume
Adjusts the volume of the current Voice.
ARP (Arpeggio)
Tur ns Arpeggio playback on or off for the current Voice.
When the [AD/mLAN Part] is selected:
This section lets you edit parameters for the AD/mLAN Part in the Voice mode. Clicking “AD” or “mLAN”
row turns this section on as illustrated below.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/mLAN Part in the
Voice mode by using the graphic knobs.
Volume
Adjusts the Volume for the AD/mLAN Part.
Output Select
Determines the specific output(s) for the AD/mLAN Part.
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R)
m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R)
m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R)
m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R)
m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R)
m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R)
m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R)
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
m1 mLAN OUTPUT 1 Mono
:: :
m14 mLAN OUTPUT 14 Mono
insL (AD Part) Effect L (Voice Part) Mono (for Vocorder effect)
MOTIF XS Editor VST Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor VST Owner’s Manual
18
Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
1 Global
This strip lets you edit the main parameters in the Song or Pattern mode, such as effect-related ones.
Clicking “G” turns this section on as illustrated below.
n When editing any of the Global parameters described below, a small square appears at the top right of the
“G” box until you save the edited data as a file. This indication is the same as the green [F] indicator
(page 29).
Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)
Adjusts the Master EQ setting.
Chorus
Selects the Chorus type.
Reverb
Selects the Reverb type.
Master Effect
Tur ns the Master Effect on or off and selects the Master Effect type.
Volume
Adjusts the entire volume.
1
3
2
Before editing
After editing
MOTIF XS Editor VST Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor VST Owner’s Manual
19
2 [Part 1-16]/[AD/mLAN Part] tab
Selects the Parts to be edited from [Part 1-16] and [AD/mLAN Part]. The illustration below indicates that
the [Part 1-16] tab is selected.
3 Part
When [Part 1-16] is selected:
This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part
on. In the example illustration below, Part 1 is active.
n When editing any of the Voice parameters such as Element parameters for each Part, a small square
appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice
or you save the edited data as a file. This indication is the same as the blue [V] indicator (page 29).
Part (Part number)
Indicates the Part number. Clicking here turns the corresponding Part on.
n In some situations, selecting a Part number on the Editor may not change a Part number on the MOTIF XS
and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you want
to match the Part number of the MOTIF XS with the one in the Editor, change the Part number via the panel
controls of the MOTIF XS.
Mute/Solo
1 Mute
Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts
simultaneously.
2 Solo
Selects the Solo Part. Only one Part can be soloed at a time.
Category, Bank, No. and Voice Name
Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the
VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the
current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to
page 15.
EQ Lo, Mi, Hi (Part EQ)
Adjusts the equalizer settings for each Part.
Ins.FX (Insertion Effect Switch)
Switches the Insertion Effect on or off.
n Insertion Effects can be applied up to eight Parts.
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the
graphic knobs.
Volume
Adjusts the Volume for each Part.
12
MOTIF XS Editor VST Window: Mixer section (when the Voice/Song/Pattern is set to “Song” or “Pattern”)
MOTIF XS Editor VST Owner’s Manual
20
Rcv Channel (Receive Channel)
Determines the MIDI Receive Channel for each Part.
Output Select
Determines the specific output(s) for the individual Part. The following settings are available.
* When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be
output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is
indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select
parameter on the MOTIF XS Editor VST.
n Depending on the setting of the Quick Setup (page 33), the audio signal of Parts which are set to “L&R” or
“m1” – “m14” or “m1&2” – “m13&14” will be output via the OUTPUT L/R jack as well as mLAN.
ARP (Arpeggio)
Tur ns Arpeggio playback on or off for each Part.
n Up to four Parts can play back the Arpeggio simultaneously.
When [AD/mLAN Part] is selected:
This section lets you edit parameters for the AD/mLAN Part in the Song or Pattern mode. Clicking “AD”
or “mLAN” row turns this section on as illustrated below.
Ins FX (Insertion Effect)
Switches the Insertion Effect on or off (only in the AD Part).
Cho, Rev, Pan (Chorus, Reverb, Pan)
Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the AD/mLAN Part by
using the knob icons.
Volume
Adjusts the Volume for the AD/mLAN Part.
Output Select
Determines the specific output(s) for the AD/mLAN Part. The available settings are the same as those of
the AD/mLAN Part in the Voice mode. Refer to page 17.
LCD Output jacks Stereo/Mono
L&R OUTPUT L and R Stereo
asL&R ASSIGNABLE OUTPUT L and R Stereo
m1&2 mLAN OUTPUT 1 and 2 Stereo (1: L, 2: R)
m3&4 mLAN OUTPUT 3 and 4 Stereo (3: L, 4: R)
m5&6 mLAN OUTPUT 5 and 6 Stereo (5: L, 6: R)
m7&8 mLAN OUTPUT 7 and 8 Stereo (7: L, 8: R)
m9&10 mLAN OUTPUT 9 and 10 Stereo (9: L, 10: R)
m11&12 mLAN OUTPUT 11 and 12 Stereo (11: L, 12: R)
m13&14 mLAN OUTPUT 13 and 14 Stereo (13: L, 14: R)
asL ASSIGNABLE OUTPUT L Mono
asR ASSIGNABLE OUTPUT R Mono
m1 mLAN OUTPUT 1 Mono
:: :
m14 mLAN OUTPUT 14 Mono
drum See below* See below*
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54

Yamaha MOTIF XS6 Manuale del proprietario

Tipo
Manuale del proprietario
Questo manuale è adatto anche per