Bosch WAN282P8SN/26 Istruzioni per l'uso

Categoria
Lavatrici
Tipo
Istruzioni per l'uso
Register your
new device on
MyBosch now and
get free benefits:
bosch-home.com/
welcome
en Instruction Manual and Installation Instructions
Washing machine
WAN...
2
Your new washing machine
You have chosen a Bosch washing
machine.
Please take a few minutes to read and
become familiar with the advantages of
your washing machine.
To meet the high quality demands
required by Bosch, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.bosch-
home.com or contact our after-sales
service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washing machine.
Display rules
: Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
/ -
Lists are represented by a small box or
a dash.
en
3
Contents
enInstruction Manual and Installation Instructions
8 Intended use. . . . . . . . . . . . . . . . .4
( Safety instructions . . . . . . . . . . .5
Children/people/pets . . . . . . . . . . . . . 5
Installation. . . . . . . . . . . . . . . . . . . . . . 6
Operation . . . . . . . . . . . . . . . . . . . . . . 8
Cleaning/Maintenance . . . . . . . . . . . 10
7 Environmental protection . . . . .11
Packaging/used appliance . . . . . . . . 11
Tips on economical use . . . . . . . . . . 11
5 Positioning and connecting . . .12
Included with the appliance . . . . . . . 12
Safety instructions. . . . . . . . . . . . . . . 13
Installation surface . . . . . . . . . . . . . . 13
Installation on a base or
a wooden joist floor . . . . . . . . . . . . . 13
Installation on a platform
with drawer . . . . . . . . . . . . . . . . . . . . 13
Installing the appliance in
a kitchenette . . . . . . . . . . . . . . . . . . . 14
Removing the transport locks . . . . . . 14
Hose and cable lengths . . . . . . . . . . 14
Water inlet. . . . . . . . . . . . . . . . . . . . . 15
Water outlet . . . . . . . . . . . . . . . . . . . 16
Levelling . . . . . . . . . . . . . . . . . . . . . . 17
Electrical connection. . . . . . . . . . . . . 17
Before washing for the first time . . . . 17
Transportation. . . . . . . . . . . . . . . . . . 18
* Getting to know the appliance .19
Washing machine . . . . . . . . . . . . . . . 19
Control panel . . . . . . . . . . . . . . . . . . 20
Display panel . . . . . . . . . . . . . . . . . . 20
Z Laundry. . . . . . . . . . . . . . . . . . . .22
Preparing the laundry . . . . . . . . . . . . 22
Sorting laundry . . . . . . . . . . . . . . . . . 22
Starching . . . . . . . . . . . . . . . . . . . . . 23
Dyeing/bleaching . . . . . . . . . . . . . . . 23
Soaking . . . . . . . . . . . . . . . . . . . . . . 23
C Detergent . . . . . . . . . . . . . . . . . . 24
Correct selection of detergent . . . . . .24
Saving energy and detergent . . . . . .24
0 Programme default settings. . . 25
Temperature . . . . . . . . . . . . . . . . . . .25
Spin speed . . . . . . . . . . . . . . . . . . . .25
Ready in . . . . . . . . . . . . . . . . . . . . . .25
\ Additional programme
settings. . . . . . . . . . . . . . . . . . . . 26
Speed Eco. . . . . . . . . . . . . . . . . . . . .26
Water Plus/Rinse Plus. . . . . . . . . . . .27
Easy-Iron . . . . . . . . . . . . . . . . . . . . . .27
Prewash . . . . . . . . . . . . . . . . . . . . . .27
1 Operating the appliance . . . . . . 27
Preparing the washing machine . . . .27
Switching on the appliance/
selecting a programme . . . . . . . . . . .27
Changing the programme default
settings . . . . . . . . . . . . . . . . . . . . . . .28
Selecting additional programme
settings . . . . . . . . . . . . . . . . . . . . . . .28
Placing laundry into the drum . . . . . .28
Measuring and adding detergent
and care products . . . . . . . . . . . . . . .29
Starting the programme . . . . . . . . . .30
Childproof lock . . . . . . . . . . . . . . . . .30
Adding/removing laundry . . . . . . . . .30
Changing the programme . . . . . . . . .31
Cancelling the programme . . . . . . . .31
Programme end during Rinse Stop . .31
Programme end . . . . . . . . . . . . . . . .31
Removing laundry/switching
off the appliance . . . . . . . . . . . . . . . .31
H Sensors . . . . . . . . . . . . . . . . . . . 32
Automatic load sensing. . . . . . . . . . .32
Unbalanced load detection system . .32
en Intended use
4
Q Appliance settings . . . . . . . . . . 32
2 Cleaning and maintenance . . . 33
Machine housing/control panel . . . . 33
Drum . . . . . . . . . . . . . . . . . . . . . . . . 33
Descaling. . . . . . . . . . . . . . . . . . . . . 34
Detergent drawer and housing . . . . 34
Drain pump is blocked . . . . . . . . . . 35
Drain hose at the siphon
is blocked . . . . . . . . . . . . . . . . . . . . 36
Filter in the water supply
is blocked . . . . . . . . . . . . . . . . . . . . 36
3 Faults and what to do
about them . . . . . . . . . . . . . . . . 37
Emergency release . . . . . . . . . . . . . 37
Information on the display panel . . . 38
Faults and what to do about them . . 39
4 After-sales service . . . . . . . . . . 41
JTechnical data . . . . . . . . . . . . . . 41
r Aqua-Stop warranty . . . . . . . . . 42
8 Intended use
Intended use
This appliance is intended for private
domestic use only.
Do not install or operate this
appliance anywhere that is liable to
experience frost and/or outdoor
conditions. There is a risk that the
appliance will be damaged if
residual water in it freezes. If hoses
freeze up, they may crack/burst.
This appliance must only be used for
washing domestic laundry,
consisting of machine-washable
items and hand-washable woollens
(see label on item). Using the
appliance for any other purpose is
outside of the scope of its intended
application and is forbidden.
This appliance is suitable for
operation with mains water and
commercially available detergents
and care products (must be suitable
for use in washing machines).
This appliance is intended for use up
to a maximum height of
4000 metres above sea level.
Before you switch on the appliance:
Check that there is no visible damage to
the appliance. Do not operate the
appliance if it is damaged. Should you
have any problems, please contact your
specialist dealer or our customer
service.
Read and follow the operating and
installation instructions and all other
information provided with this appliance.
Retain the documents for subsequent
use or for subsequent owners.
Safety instructions en
5
( Safety instructions
Safety instructi ons
The following safety information
and warnings are provided to
protect you from injury and to
prevent material damage to
your surroundings.
It is nevertheless important to
take the necessary precautions
and to proceed with care when
installing, maintaining, cleaning
and operating the appliance.
Children/people/pets
:Warning
Risk of death!
Children and other people who
are unable to assess the risks
involved when using the
appliance may injure
themselves or may find
themselves in life-threatening
situations. Therefore please
note:
The appliance may be used
by children over the age of 8
years and by persons with
reduced physical, sensory or
mental capacity or by
persons with a lack of
experience or knowledge as
long as they are supervised
or have received instruction
on how to use the appliance
safely and they have
understood the potential
risks of using the appliance.
Children must not play with
this appliance.
Do not allow children to
clean or maintain this
appliance unsupervised.
Keep children under 3 years
and pets away from this
appliance.
Do not leave the appliance
unattended when children or
other people who are unable
to assess the risks are in the
vicinity.
:Warning
Risk of death!
Children may lock themselves
inside appliances and find
themselves in a life-threatening
situation.
Do not position the
appliance behind a door, as
this may obstruct the
appliance door or prevent it
from opening completely.
Once an appliance has
reached the end of its life,
pull the mains plug from the
socket before severing the
mains cable, and then
destroy the lock on the
appliance door.
:Warning
Risk of suffocation!
If allowed to play with the
packaging/plastic film or
packing components, children
may become caught in these or
pull them over their heads and
suffocate.
en Safety instructions
6
Keep packaging, plastic film
and packing components away
from children.
:Warning
Risk of poisoning!
Detergents and care products
may result in poisoning if
consumed.
If accidentally swallowed, seek
medical advice. Keep
detergents and care products
out of the reach of children.
:Warning
Risk of burns!
When washing at high
temperatures, the glass in the
appliance door becomes hot.
Stop children from touching the
appliance door when it is hot.
:Warning
Eye/skin irritation!
Contact with detergents or care
products may cause eye/skin
irritation.
Rinse eyes/skin thoroughly if
they/it come(s) into contact
with detergents or care
products. Keep detergents and
care products out of the reach
of children.
Installation
:Warning
Risk of electric shock/fire/
material damage/damage to
the appliance!
If the appliance is not installed
properly, this may lead to a
dangerous situation. Ensure
the following:
The mains voltage on your
power socket must match
the rated voltage specified
on the appliance
(identification plate). The
connected loads and the
required fuse protection are
specified on the identification
plate.
The mains plug and the
protective contact socket
must match and the earthing
system must be correctly
installed.
The installation must have an
adequate cross section.
The mains plug must be
freely accessible at all times.
If this is not possible, in
order to comply with the
relevant safety regulations, a
switch (all pole
disconnection) must be built
into the permanent
installation in accordance
with electrical installation
regulations.
Safety instructions en
7
If using a residual current
circuit breaker, only use one
that bears the following
mark: z. The presence of
this mark is the only way to
be sure that it fulfils all the
applicable regulations.
:Warning
Risk of electric shock/fire/
material damage/damage to
the appliance!
If the appliance's mains cable is
altered or damaged, this may
result in electric shock, short
circuiting or fire due to
overheating.
The mains cable must not be
kinked, crushed or altered, and
must not come into contact with
any heat sources.
:Warning
Risk of fire/material damage/
damage to the appliance!
The use of extension cords or
power strips may result in fire
due to overheating or short
circuiting.
Connect the appliance directly
to an earthed socket that has
been correctly installed. Do not
use extension cords, power
strips or multi-way couplers.
:Warning
Risk of injury/material
damage/damage to the
appliance!
The appliance may vibrate or
move when in operation,
potentially resulting in injury
or material damage.
Place the appliance on a
clean, even, solid surface
and, using a spirit level to
guide you, level it with the
screw-in feet.
Risk of injury/material damage/damage to the appliance!
If you take hold of any of the
appliance's protruding parts
(e.g. the appliance door) in
order to lift or move it, these
parts may break off and
cause injury.
Do not take hold of any of
the appliance's protruding
parts in order to move the
appliance.
:Warning
Risk of injury!
The appliance is very heavy.
Lifting it may result in injury.
Do not lift the appliance on
your own.
Risk of injury!
The appliance has sharp
edges on which you could
cut your hands.
Do not take hold of the
appliance by its sharp
edges. Wear protective
gloves to lift it.
Risk of injury!
en Safety instructions
8
If the hoses and mains
cables are not correctly
routed, they may constitute a
tripping hazard, which may
result in injury.
Route hoses and cables
such that they do not
constitute a tripping hazard.
Caution!
Material damage/damage to
the appliance
If the water pressure is too
high or too low, the
appliance may not be able to
operate properly, and it may
also result in material
damage or damage to the
appliance.
Make sure that the water
pressure in the water supply
facility is at least
100 kPa (1 bar), and does
not exceed
1000 kPa (10 bar).
Material damage/damage to the appliance
If the water hoses are altered
or damaged, this may result
in material damage or
damage to the appliance.
The water hoses must not be
kinked, crushed, altered or
severed.
Material damage/damage to the appliance
The use of hoses supplied
by other brands to connect
to the water supply may
result in material damage or
damage to the appliance.
Use the hoses supplied with
the appliance or genuine
spare part hoses only.
Material damage/damage to the appliance
The appliance is secured for
transportation by transport
locking devices. If the
transport locking devices are
not removed before the
appliance is operated, this
may result in damage to the
appliance.
It is important to completely
remove all transport locking
devices before using the
appliance for the first time.
Make sure that you retain
these transport locking
devices separately. It is
important to refit the
transport locking devices if
the appliance is to be
transported, in order to
prevent the appliance from
being damaged in transit.
Operation
:Warning
Risk of explosions/fire!
Laundry that has been
pretreated with cleaning agents
that contain solvents, e.g. stain
remover/cleaning solvent, may
cause an explosion in the drum.
Rinse the laundry thoroughly
with water before washing it in
the machine.
Safety instructions en
9
:Warning
Risk of poisoning!
Poisonous fumes may be given
off by cleaning agents that
contain solvents, e.g. cleaning
solvent.
Do not use cleaning agents that
contain solvents.
:Warning
Risk of injury!
If you support your weight/sit
on the appliance door when
it is open, the appliance may
tip over, which may result in
injury.
Do not support your weight
on the appliance door when
it is open.
Risk of injury!
If you climb onto the
appliance, the worktop may
break, which may result in
injury.
Do not climb onto the
appliance.
Risk of injury!
If you reach into the drum
while it is still rotating, you
risk injuring your hands.
Wait until the drum has
stopped rotating.
:Warning
Risk of scalding!
When washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot detergent
solution (e.g. when draining hot
detergent solution into a
washbasin).
Do not reach into the hot
detergent solution.
:Warning
Eye/skin irritation!
Detergent and care products
may spray out if the detergent
drawer is opened while the
appliance is in operation.
Rinse eyes/skin thoroughly if
they/it come(s) into contact
with detergents or care
products. If accidentally
swallowed, seek medical
advice.
Caution!
Material damage/damage to
the appliance
If the amount of laundry in
the appliance exceeds its
maximum load capacity, it
may not be able to operate
properly, or this may result in
material damage or damage
to the appliance.
Do not exceed the maximum
load capacity of dry laundry.
Make sure you comply with
the maximum load capacities
specified for each of the
programs Supplementary
sheet for the operating and
installation instructions.
Material damage/damage to the appliance
en Safety instructions
10
If you pour the wrong
quantity of detergent or
cleaning agent into the
appliance, this may result in
material damage or damage
to the appliance.
Use detergents/care
products/cleaning agents
and softeners in accordance
with the manufacturers'
instructions.
Cleaning/Maintenance
:Warning
Risk of death!
The appliance is powered by
electricity. There is a risk of
electric shock if you come into
contact with live components.
Therefore please note:
Switch off the appliance.
Disconnect the appliance
from the power supply (pull
out the plug).
Never take hold of the mains
plug with wet hands.
When removing the mains
plug from the socket, always
take hold of the plug itself
and never the mains cable,
otherwise this may damage
the mains cable.
Do not make any technical
modifications to the
appliance or its features.
Repairs and any other work
on the appliance must only
be conducted by our
customer service or by an
electrician. The same applies
for replacing the mains cable
(when necessary).
Spare mains cables can be
ordered from our customer
service.
:Warning
Risk of poisoning!
Poisonous fumes may be given
off by cleaning agents that
contain solvents, e.g. cleaning
solvent.
Do not use cleaning agents that
contain solvents.
:Warning
Risk of electric shock/material
damage/damage to the
appliance!
If moisture penetrates the
appliance, this may cause it to
short circuit.
Do not use a pressure washer,
steam cleaner, hose or spray
gun to clean your appliance.
Environmental protection en
11
:Warning
Risk of injury/material
damage/damage to the
appliance!
The use of spare parts and
accessories supplied by other
brands is dangerous and may
result in injury, material damage
or damage to the appliance.
For safety reasons, use
genuine spare parts and
accessories only.
Caution!
Material damage/damage to
the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain
removers, prewash sprays, etc.)
may cause damage if they
come into contact with the
surfaces of the appliance.
Therefore please note:
Do not allow these agents to
come into contact with the
surfaces of the appliance.
Clean the appliance with
nothing but water and a soft,
damp cloth.
Remove any detergent,
spray or other residues
immediately.
7 Environmental
protection
Environmental protection
Packaging/used appliance
Tips on economical use
For optimum energy and water
savings, fill the appliance with the
maximum amount of laundry for
each programme.
Overview of programmes
~ Supplementary sheet for the
operating and installation
instructions.
Wash normally soiled laundry
without a prewash.
Save energy and detergent when
washing lightly and normally soiled
laundry.
~ "Detergent" on page 24
The temperatures which can be
selected refer to the care labels on
the textiles. The temperatures used
in the machine may deviate from this
to ensure you get the optimum
combination of energy-saving and
washing results.
)
Dispose of packaging in an
environmentally-responsible
manner.
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (Waste
Electrical and Electronic
Equipment - WEEE).
This directive specifies the
framework for the return and
recycling of used appliances
as applicable throughout the
EU.
en Positioning and connecting
12
In order to save energy, the
appliance switches to energy saving
mode. The display panel lighting
goes out after a few minutes and the
Start Reload A button flashes.
~ "Display panel" on page 20
If the laundry is subsequently dried
in a tumble dryer, select the spin
speed according to the tumble dryer
manufacturer's instructions.
5 Positioning and
connecting
Positioning and connecting
Included with the appliance
Notes
Check the machine for transport
damage. Never use a damaged
machine. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
after-sales service.
Moisture inside the drum is due to
final testing.
The content of the drum and the hoses
delivered with the appliance vary
depending on the model.
Standard / Aqua-Secure
Aqua-Stop
( Mains cable
0 Water drain hose
8 Elbow for securing the water
drain hose*
@ Water supply hose on Aqua-Stop
model
H Bag:
Operating and installation
instructions + supplementary
sheet for the operating and
installation instructions
After-sales service location
directory*
Warranty*
Cover caps for openings after
the transport locks have been
removed
Measuring aid* for liquid
detergent
Adapter with sealing washer
from 21 mm = ½" to 26.4 mm
= ¾" *
P Water supply hose on Standard/
Aqua-Secure models
* depending on the model
#
+
3
Positioning and connecting en
13
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water drain hose to a siphon.
Useful tools
Spirit level for aligning
Spanner with:
WAF13 for loosening the
transport braces, and
WAF17 for aligning the appliance
feet
Safety instructions
:Warning
Risk of injury!
The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine; wear
protective gloves.
If the washing machine is lifted by its
protruding parts (e.g. the washing
machine door), the components may
break off and cause injuries.
Do not lift the washing machine by
protruding parts.
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Route hoses and cables in such a
way that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
If in doubt, have the appliance
connected by a specialist.
Installation surface
Note: The washing machine must be
aligned in a stable manner so that it
does not move around.
The installation surface must be firm
and level.
Soft floors/floor coverings are not
suitable.
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 2200, WX 975600,
Z 7080X0
Note: On wooden joist floors, install the
washing machine:
In a corner, if possible,
On a water-resistant wooden board
(min. 30 mm thick) which is screwed
tightly to the floor.
Installation on a platform with
drawer
*
Platform order no.: WMZ 20490, WZ
20490, WZ 20520
* Depending on the model
en Positioning and connecting
14
Installing the appliance in a
kitchenette
:Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
Notes
Recess width of 60 cm required.
Only install the washing machine
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
The machine is secured for
transportation using transport locks.
If the transport locks are not
removed, the machine may become
damaged when it is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
To prevent transport damage from
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Note: Keep the screws and sleeves
screwed together in a safe place.
1. Take the hoses out of the holders.
2. Remove the mains cable from the
holders. Unscrew and remove all
four transport lock screws.
Remove the sleeves.
3. Fit the covers. Lock the covers firmly
in place by applying pressure to the
snap-in hooks.
Hose and cable lengths
Left-hand connection
PLQFP
PD[FP
aFP
aFP
aFPaFP
Positioning and connecting en
15
Right-hand connection
* depending on the model
Tip: The following are available from
specialist retailers/our after-sales
service:
Extension for Aqua-Stop and cold
water supply hose (approx. 2.50 m);
order no. WMZ 2380, WZ 10130,
Z 7070X0
A longer supply hose (approx. 2.20
m) for standard models; individual
component number for the after-
sales service: 00353925
Water inlet
:Warning
Risk of electric shock!
The Aqua-Stop contains an electric
valve. There is a risk of electric shock if
you immerse the Aqua-Stop safety valve
in water. Do not immerse the safety
valve in water.
Notes
Only operate the washing machine
using cold mains water.
Do not connect the machine to the
mixer tap of an unpressurised hot-
water boiler.
Do not use a used supply hose. Only
use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.
Do not kink or squash the water
supply hose.
Do not alter (shorten, cut through)
the water supply hose (otherwise, its
strength is no longer guaranteed).
Only tighten the screw connections
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may become
damaged.
When connecting to a 21 mm = ½"
tap, first fit an adapter
*
with a sealing
washer from 21 mm = ½" to 26.4
mm = ¾".
Optimum water pressure in the supply
network
At least 100 kPa (1 bar)
Maximum 1000 kPa (10 bar)
When the tap is open, the water flow is
at least 8 l/min.
If the water pressure is higher than this,
a pressure-reducing valve must be
installed.
Connection
Connect the water supply hose to the
water tap (¾" = 26.4 mm) and to the
appliance (not necessary for Aqua-Stop
models as this is permanently installed):
Model: Standard
aFP
aFP
aFPaFP
PLQFP
PD[FP
* supplied depending on the model
PLQPP
ê
ë
en Positioning and connecting
16
Model: AquaSecure
Model: Aqua-Stop
Note: Open the water tap carefully,
checking the leak tightness of the
connection points. The screw
connection is under mains water
pressure.
Water outlet
:Warning
Risk of scalding!
When washing at high temperatures,
there is a risk of scalding if you come
into contact with hot detergent solution
(e.g. when draining hot detergent
solution into a washbasin).
Do not reach into the hot detergent
solution.
Caution!
Water damage
When water is being pumped away, the
outlet hose is under water pressure and
may slip out of the wash basin or
connection point.
Secure the outlet hose so that it cannot
slip out.
Caution!
Damage to the appliance/fabrics
If the end of the outlet hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the appliance/fabrics.
Make sure that:
The plug does not block drainage
from the wash basin.
The end of the drain hose is not
immersed in the drained water.
The water drains away quickly
enough.
Notes
Do not kink the water drain hose or
put strain on it lengthways.
Height difference between the
installation surface and the drain:
min. 60 cm, max. 100 cm
You can lay the water drain hose as
follows:
Drainage into a siphon
The connection point must be
secured using a hose clamp with a
diameter of 24–40 mm (available
from specialist dealers).
Drainage into a wash basin
Secure the outlet hose so that it
cannot slip out.
Elbow available from after-sales
service:
Individual part number 00655300
Positioning and connecting en
17
Levelling
Level the appliance using a spirit level.
Incorrect levelling may result in intense
noise, vibrations and "wandering".
1. Loosen the lock nuts using a
wrench, by turning it in a clockwise
direction.
2. Check the alignment of the washing
machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
3. Tighten the lock nut against the
housing.
In doing so, hold the foot tight and
do not adjust its height.
The lock nuts on all four appliance
feet must be screwed tightly against
the housing.
Electrical connection
:Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Never touch or hold the mains plug
with wet hands.
Only pull out the mains cable by the
plug and never by the cable, as this
could damage it.
Never unplug the mains plug during
operation.
Observe the following information and
ensure that:
Notes
The mains voltage and voltage
indicated on the washing machine
(rating plate) are the same.
The connected load and fuse
required are specified on the rating
plate.
The washing machine is only
connected to an alternating current
supply via a properly installed
earthed socket.
The mains plug fits the socket.
The cable cross-section is adequate.
The earthing system is properly
installed.
The mains cable is only replaced by
a qualified electrician (if this is
necessary). Replacement mains
cables are available from the after-
sales service.
No multiple plugs/couplings or
extension cables are used.
If an earth-leakage circuit breaker is
used, only a type which displays the
z symbol is used.
Only this symbol guarantees
compliance with the currently
applicable regulations.
The mains plug can be accessed at
all times.
The mains cable is not kinked,
squashed, altered or cut through.
The mains cable does not come into
contact with heat sources.
Before washing for the first
time
The washing machine was thoroughly
tested before leaving the factory. To
remove any residues from the product
and to remove water that may be left
over from the test, run the first wash
cycle without any laundry.
Note: The washing machine must be
correctly installed and connected.
~ Page 12
en Positioning and connecting
18
1. Check the appliance.
Note: Never use a damaged
machine. Inform the after-sales
service.
2. Remove the protective foil from the
worktop and the control panel.
3. Connect the mains plug.
4. Turn on the water tap.
5. Do not load any laundry. Close the
door.
6. Depending on the model, run the
Drum Clean
*
or Cottons 90 °C
programme.
7. Open the detergent drawer.
8. Pour approximately 1 litre of water
into compartment II.
9. Pour standard detergent into
compartment II.
Note: To prevent foaming, only use
half the amount of detergent
recommended by the detergent
manufacturer. Do not use detergents
designed for wool or delicates.
10.Close the detergent drawer.
11.Press the Start Reload A button.
12.When the programme ends, switch
off the appliance.
Your washing machine is now ready to
use.
Transportation
e.g. when moving home
Preparatory work:
1. Turn off the water tap.
2. Reduce the water pressure in the
supply hose.
~ "Filter in the water supply is
blocked" on page 36
3. Drain the remaining detergent
solution.
~ "Drain pump is blocked"
on page 35
4. Disconnect the washing machine
from the mains.
5. Remove the hoses.
Installing the transport locks:
1. Remove the covers and keep them
in a safe place.
Use a screwdriver if necessary.
2. Insert all four sleeves.
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Before switching on the appliance
again:
Notes
The transport locks must be
removed.
~ "Removing the transport locks"
on page 14
To prevent unused detergent from
flowing straight into the drain during
the next wash: Pour approx. 1 litre of
water into compartment II and start
the Drain/Empty programme.
* depending on the model
Getting to know the appliance en
19
* Getting to know the appliance
Getti ng to know the appliance
Washing machine
#
( Detergent drawer
0 Operating/display panel
8 Loading door with door handle
@ Service flap
en Getting to know the appliance
20
Control panel
Control panel differs depending on the model
Display panel
Note:
The tables show possible setting options and information in the display panel;
these differ depending on the model.
( Programmes ~ Supplementary
sheet for the operating and
installation instructions.
0 Programme selector
8 Display panel for settings and
information
#
+
#
+
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Bosch WAN282P8SN/26 Istruzioni per l'uso

Categoria
Lavatrici
Tipo
Istruzioni per l'uso