Lenco DIR-250BK Manuale del proprietario

1

Model: DIR-250

USER MANUAL

Wifi/Lan Internet, Dab+, Fm Tuner with

Bluetooth and Spotify Connect

HANDLEIDING

Wifi/Lan Internet, Dab+, Fm-tuner met

Bluetooth en Spotify Connect

BEDIENUNGSANLEITUNG

WLAN/LAN-Internet-, DAB+- und FM-Tuner

mit Bluetooth- und Spotify-Connect

MODE D’EMPLOI

Internet Wifi/Lan, Dab+, Fm Tuner avec

Bluetooth et Spotify Connect

MANUAL DEL USUARIO

Internet Wifi/Lan, Dab+, radio FM con

conexión Bluetooth y Spotify

MANUALE D'USO

Sintonizzatore Wi-Fi/Lan Internet, Dab+, Fm

con Bluetooth e Spotify Connect

2

Index:

English........................................................................................................................................ 3

Nederlands .............................................................................................................................. 45

Deutsch .................................................................................................................................... 91

Français .................................................................................................................................. 138

Español .................................................................................................................................. 184

Italiano ................................................................................................................................... 230

Version: 2.0

3

English

DIR-250

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf,

leave

5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and

other heat-generating products or naked flame. The device can only be used in

moderate climates. Extremely cold or warm environments should be avoided. Working

temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and

restart the device following the instruction manual. During file transmission, please

handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High

voltage flows through the product and inserting an object can cause electric shock

and/or short circuit internal parts. For the same reason, do not spill water or liquid on

the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near

swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects

filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm

wet room with damp, water droplets or condensation may occur inside the unit and

the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours

before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times

before leaving the factory, it is still possible that problems may occur, as with all

electrical appliances. If you notice smoke, an excessive build-up of heat or any other

unexpected phenomena, you should disconnect the plug from the main power socket

immediately.

11. This device must operate on a power source as specified on the specification label. If

you are not sure of the type of power supply used in your home, consult your dealer or

local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.

To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse,

modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files.

Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the

unit directly. Don’t use an USB extension cable because it can cause interference

resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory

or mental disabilities, or a lack of experience and knowledge, unless they’re under

4

supervision or have received instructions about the correct use of the device by the

person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or

industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this

product in an unstable position vibrations or shocks or by failure to follow any other

warning or precaution contained within this user manual will not be covered by

warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device

has been damaged in any way, such as the power supply cord or the plug, when liquid

has been spilled or objects have fallen into the device, when the device has been

exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or

permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:

⚫ If any trouble occur, disconnect the AC power cord and refer servicing to qualified

personnel.

⚫ Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs

and the cable’s exit point. Do not place heavy items on the power adaptor, which may

damage it. Keep the entire device out of children’s reach! When playing with the

power cable, they can seriously injure themselves.

⚫ Unplug this device during lightning storms or when unused for a long period.

⚫ The socket outlet must be installed near the equipment and must be easily

accessible.

⚫ Do not overload ac outlets or extension cords. Overloading can cause fire or

electric shock.

⚫ Devices with class 1 construction should be connected to a main socket outlet

with a protective earthed connection.

⚫ Devices with class 2 construction do not require a earthed connection.

⚫ Always hold the plug when pulling it out of the main supply socket. Do not pull

the power cord. This can cause a short circuit.

⚫ Do not use a damaged power cord or plug or a loose outlet. Doing so may result

in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell

batteries:

Warning:

⚫ “Do not ingest battery, Chemical Burn Hazard” or equivalent working.

⚫ [The remote control supplied with] This product contains a coin/button cell battery. If

the battery is swallowed, it can cause severe internal burns in just

2 hours and can lead to death.

⚫ Keep new and used batteries away from children.

⚫ If the battery compartment does not close securely, stop using the product and keep

it away from children.

⚫ If you think batteries might have been swallowed or placed inside any part of the

body, seek immediate medical attention.

29. Caution about the use of Batteries:

⚫ Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

⚫ Battery cannot be subjected to high or low extreme temperatures, low air pressure at

high altitude during use, storage or transportation.

⚫ Replacement of a battery with an incorrect type that can result in an explosion or the

leakage of flammable liquid or gas.

5

⚫ Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a

battery, that can result in an explosion.

⚫ Leaving a battery in an extremely high temperature surrounding environment that can

result in an explosion or that leakage of flammable liquid or gas.

⚫ A battery subjected to extremely low air pressure that may result in an explosion or

the leakage of flammable liquid or gas.

⚫ Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage and before all other

connections have been made.

Accessories:

User manual

Power supply

Remote control

DAB/FM indoor antenna

WIFI antenna

RCA cable

6

INSTALLATION

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage and before all

other connections have been made.

FRONT VIEW

1. USB Port

2. Earphone Jack

3. OK/NAVIGATE Swivel Knob

4. Standby Button

5. MODE Button

6. Fav. Button

7. Home Button

8. LCD Display

9. Dimmer Button

10. Left/Prev Button

11. Right/Next Button

12. Alarm Button

13. VOLUME Knob

14. Remote Control Sensor

REAR VIEW

7

15. DC IN Jack

16. W-LAN Antenna Installation Port

17. AUDIO OUTPUT ANALOG R/L Jack

18. ANALOG AUDIO INPUT Jack

19. ANALOG AUDIO OUTPUT Jack

20. AUDIO OUTPUT DIGITAL OPTICAL Jack

21. AUDIO OUTPUT DIGITAL COAXIAL Jack

22. LAN INPUT Jack

23. Antenna Installation Port

REMOTE CONTROL

8

1. Standby button

2. Switch speaker ON/OFF

3. Main menu

4. Saved stations, Favorites, etc

5. DAB/FM scan

6. Local station

7. Go back one track

8. Play/Pause

9. Go forward one track

10. Alarm button

11. MODE-Go to main menu items

12. EQ-Set button

13. Up navigation button

14. Left navigation button

15. Confirm selection

16. Right navigation button

17. Down navigation button

18. Decrease volume

19. Increase volume

20. 0.....9 Select favorites/Fav.; input letters

and numbers

21. Dimmer button

22. Sleep button

Battery installation for remote control:

1. Push on the ‘open’ marking of the battery cover and slide it downwards

2. Install two (2) x AAA size batteries 1.5V into the battery compartment (check the correct

polarity when inserting)

3. slide the battery cover back

Battery Precautions:

Follow these precautions:

1. Use only the type of battery specified in this manual.

2. Be sure to follow the correct polarity when installing the battery as indicated in the battery

compartment. A battery which is inserted in the wrong way may cause damage to the

device.

3. Do not try to recharge single use batteries. (Follow the battery manufacturer’s directions.)

4. Do not throw batteries into fire because they may explode.

9

5. Clean the battery contacts of the device prior to replacing empty batteries.

Tighten the W-lan antenna clockwise by using the proper tool as illustrated.

Plug the pig-tail antenna into the Antenna port as illustrated.

10

ANALOG AUDIO OUTPUT CONNECTIONS

11

DIGITAL AUDIO OUTPUT CONNECTIONS

12

1 Requirements for using the DIR-250

1.1 Network Requirements

Before using the DIR-250, the following requirements are needed:

⚫ A broadband connection in combination with a wired/wireless access point, router or

similar network device.

⚫ The Wifi network router needs to support WIFI (802.11 b/g/n) wireless connection.

⚫ A smart phone, tablet or pc which is on the same network as the DIR-250

Display symbols

establishing Connection

No wireless connection

Wireless connection established

Wired connection established

No wired connection

VHF radio reception: Mono

VHF radio reception: Stereo

VHF radio function selected

AUX function selected

Speaker off

Search

Alarm on

Internet radio station saved as Fav.

FM radio station saved

2 Getting started

2.1 Get the network ready

● For wireless W-LAN network connection:

Check if WLAN LINK/ACT light of the wired/wireless access point or router is illuminated.

Consult the user guide of that for any questions.

13

Note: WiFi allows data transfer over short distances within 20 meters without the need of

cabling between the devices. Walls and ceilings may reduce WIFI range.

Therefore try to locate the DIR-250 and/or the access point within the distance above and

avoid any obstacles between two devices.

● Connect the power adaptor to the mains and plug the DC plug the adaptor into the DC-IN

socket of the DIR-250

● On first use the DIR-250 will start with the installation wizard. The system will ask you to:

1 set Language and Network Configurations (fig 1.)

(use the navigation knob(3) to select)

1

2 Check network availability on power on (fig 2.)

2

3 Configure the wifi network (fig 3.)

3

● Select Yes to establish connection to a network

14

● if you Select Yes(WPS)(Only for WPS routers) and then press the WPS button on your

router.

If you answer ‘Yes’, the display goes to scanning for Wireless Network and a list of available

wireless networks will appear.

NOTE: Only 2.4 Ghz networks are supported

1

2

The number of bars in the wireless symbol in front the network name (SSID) indicate the

signal strength of the network. The key symbol indicates that the network is password-

protected.

If the device does not find any wireless networks, a ‘no wireless Networks found’ appears on

the display. Change your location and if necessary and check your WLAN router. You can find

the SSID of your Access Point in the configuration of the Access Point (Router). Select your

network and confirm with OK, If your WLAN is password-protected, you will be prompted to

enter the wifi password.

Enter the password using the navigation control buttons on the device or remote control.

You can rotate the UP/DOWN knob to input the wifi password. if it is accidentally pressed

‘ ’ to move a redundant entry, press ‘ ’ to correct.

With remote control

The cursor indicates the current entry space.

Press the corresponding number button repeatedly.

0

0(delete entry)

1 1(space) @ ! ” # $ % & () * ’ + - { \ | }< >?........

2 2 A B C a b c

3 3 D E F d e f

15

4 4 G H I g h i

5 5 J K L j k l

6 6 M N O m n o

7 7 P Q R S p q r s

8 8 T U V t u v

9 9 W X Y Z w x y z

buttons:

‘ ’Go to previous entry space, entry can be overwritten

‘ ’Go to next entry space, the last entry is saved

‘ ’Select number/letter

Input via front panel

Rotate the UP/DOWN navigation knob(3) to input numbers/letters.

Once you are on the letter you want, press to move to the next entry.

When you are finnished, press OK to confirm. You may press to move to a previous

character entry.

‘OK’ Confirm entire entry

It may take a few seconds to establish the network connection.

Once the connection is established, the main menu appears with the following menu items:

- Internet Radio: Access to worldwide radio stations

- Media Centre: Access to your UPnP devices via software with streaming capability.

- FM: Enter the FM radio mode

- DAB/DAB+: Enter the DAB radio mode

16

- Information Center: Access to weather, financial and system information, App

- AUX: Access to AUX mode

- Bluetooth: Enter the Bluetooth mode

- Configuration: Various system settings

- Local Radio: Access to radio stations in a particular region (e.g. only German

stations)

- My media U: Access to an online media library. This menu item only appears if the

function has already been enabled in the configuration menu -> Manage my

media U.

●

Press the button to enter the standby mode. The time, date and any active Alarm time

is shown on the screen.

●

If you configured a network connection, it will automatically connect to it when the DIR-250

is turned on again. If you need to change the network, go to the configuration - > network

menu to change the connection.

3 About Music Streaming

You can stream music to the DIR-250 with DLNA. DLNA is an industry-wide standard for sharing data

over a home network. Depending on the DLNA-compatible devices you own. With DLNA you are able to stream

mp3 music stored from your laptop/NAS or other DLNA compatible device to play on the DIR-250.

Lenco DIR-250 is the default device name on DLNA but you may rename it as you like. (See

section 5.3)

The information below is the introduction of how to setup up media steaming from PC or

other media server. Use the instruction manual of the software or hardware device you

want to use.

Make sure the music files are in on of the following formats: MP3, WMA, WAV or AAC.

Refer to section 5.7 for the details of the control on DIR-250 for music steaming playback.

3.1 UPnP

● To enjoy the streaming music form PC, the following steps are to be done on the PC:

- Connect the PC to the network.

17

- Ensure the DIR-250 is powered on and connected to the same network.

- Open the UPnP platform Windows Media Player (11 or later).

Alternatively, other platforms or server such as Windows Media Connection may be used.

Below set up example is under windows XP and Windows Media player 11 version.

Allow to share your media to Lenco DIR-250

Add the audio files and folders you want to share with Lenco DIR-250 to the media library.

You may also enjoy the streaming music form other music server. Such as smart phone

(Android platform):

- Connect the mobile to the network

- Search and install media sharing apps from Google Play.

- Add the audio files form your mobile you want to share.

● After setup the shared server, choose the music and control playback on the DIR-250. (See

section 5.7)

4 DLNA Function

● Besides UPnP, DIR-250 supports DLNA function, you share the music files from PC or Android

mobile, and you use your PC, Android mobile or iPhone/iPad to control music playback on

18

the DIR-250. (It is not required to control each playback on the DIR-250)

● The PC system requirement for DLNA is Windows 7 and Windows Media Player 12. Setup as

below:

Firstly, share the media on your PC to DIR-250.

Control Panel > Network and Internet

〉

Network and sharing COK > Media streaming

options

Open Windows Media Player to enable allow remote control of tried player.

Right click any music in the library and choose Play to Lenco DIR-250.

19

There will be a window for controlling music playback on Lenco DIR-250.

You may search and install any free or commercial DLNA apps from Google Play or Apple

Store if you are using Android mobile, tablet or iPhone/iPad. It is suggested to use Bubble

UPnP, Media Share on Android mobile, tablet or iPhone/iPad.

Some apps may not support streaming music form iPhone/iPod but iPhone/iPod could still

be used to control steaming music from other servers.

Procedures for playing shared music on the app are as follows:

20

Select Lenco DIR-250 as the player. Some apps may allow to play the music to multi players

at the same time.

Select music server and choose the music. Some app can create a playlist if you choose

several music.

Select server and player Select music

● When using DLNA music steaming function on Music Link, you can only control the volume

and standby via the unit. It is restricted to control the other functions.

● Stop DLNA on PC, mobile or tablet before you resume Music Link’s own control.

La pagina sta caricando ...

Lenco DIR-250BK Manuale del proprietario

Lenco DIR-250BK Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti