Candy CBT6240/1LN Manuale utente

EN

COOKER HOOD

INSTRUCTIONS MANUAL .............................................

2

FR

HOTTE DE CUISSON

MANUEL D'INSTRUCTIONS ..........................................

20

IT

CAPP

A

MANUALE DI ISTRUZIONI .............................................

39

PL

OKAP KUCHENNY

INSTRUKCJA OBSŁUGI ................................................

58

ES

CAMPANA EXTRACTORA

MANUAL DE INSTRUCCIONES.....................................

77

PT

EXAUSTOR

MANUAL DE INSTRU

Ç

ÕES ...........................................

96

CZ

ODSAVA

Č

PAR NAD SPOR

Á

K

NÁVOD K POUŽIT

Í

.........................................................

115

SK

DIGESTOR

NÁVOD NA POUŽITIE ....................................................

134

CBT9240/2X – CBT6324/1X – CBT6324/1W – CBT6324/1N

CBT6130/2X – CBT6240/1LN – CBT6240/1LW – CBT6240/1LX

Please Read The User Manual Carefully!

2

1 TECHNICAL DRAWING ............................................................................................................ 3

2 WARNINGS AND SAFETY PRECAUTIONS ............................................................................. 4

2.1 Life-Threatening Danger, Poisoning Danger .......................................................................................... 6

2.2 Danger of electric shock! ........................................................................................................................ 6

2.3 Danger of physical injury! ........................................................................................................................ 6

2.4 Danger of burn, danger of electric shock! ............................................................................................... 7

2.5 Dangers of fire and physical injury! ......................................................................................................... 7

3 USAGES WITH AND WITHOUT CARBON USE ....................................................................... 8

3.1 Replacement of Carbon Filter ................................................................................................................. 9

3.2 Replacement of AF 90 Carbon Filter ...................................................................................................... 9

3.3 Replacement of AF 100 Carbon Filter .................................................................................................... 9

4 CLEANING AND PREVENTIVE MAINTENANCE ................................................................... 10

4.1 Washing in Dishwasher ........................................................................................................................ 10

4.2 Hand Wash ........................................................................................................................................... 10

4.3 Removal/Installation of Aluminium Filter ............................................................................................... 10

5 INSTALLATION OF APPLIANCE ............................................................................................ 11

5.1 Installation and Unpacking of the Appliance ......................................................................................... 11

5.2 Installation and Unpacking of the Appliance ......................................................................................... 11

5.3 Exhaust Air Mode .................................................................................................................................. 12

5.4 Air Discharge Line ................................................................................................................................. 12

5.5 Checking the Wall ................................................................................................................................. 12

5.6 Electrical Connection ............................................................................................................................ 12

5.7 Danger of Electric Shock! ..................................................................................................................... 12

6 OVERVIEW OF APPLIANCE .................................................................................................. 13

7 ASSEMBLY OF PRODUCT ..................................................................................................... 14

8 USE OF PRODUCT ................................................................................................................. 15

9 REPLACEMENT OF LAMPS ................................................................................................... 17

9.1 Replacement of Halogen Lamp ............................................................................................................ 17

9.2 Replacement of Spark Plug Lamp ........................................................................................................ 17

9.3 1W Replacement of LED Lamp ............................................................................................................ 17

10 AUTHORIZED TECHNICAL SERVICE .................................................................................. 18

10.1 Potential Failures and Solutions ......................................................................................................... 19

10.2 Technical Table ................................................................................................................................... 19

"Complies with EEE Regulation. No PCB* Included"

* PCB = Printed Circuit Board

3

4

1

17

4

40 13

6

CBT9240/2X

CBT6324/1X

CBT6324/1W

CBT6324/1N

1 TECHNICAL DRAWING

CBT6130/2X

CBT6240/1LN

CBT6240/1LW

CBT6240/1LX

Fig. 1: TECHNICAL DRAWING

4

2 WARNINGS AND SAFETY PRECAUTIONS

 This appliance can be used by children aged

from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and understand the

hazards involved.

 This product is designed for home use.

 Usage voltage of your product is

220-240 Volt~50 Hz.

 Power cord of your product is fitted with a

grounded plug. This cord must be plugged into a

grounded outlet.

 The whole electrical wiring must be installed by

a qualified electrician.

 Installation by unauthorized persons could

lead to poor operation performance, damage to the

product, and accidents.

 Feeder cable of the appliance mustn't be

exposed to jamming or crashing during assembly.

Feeder cable mustn't be placed near the cooker. In

such cases, it might melt down and lead to fire.

 Do not plug in the appliance before the

installation.

 Make sure that the installation place allows

the user to easily unplug the power cable in case

of any danger.

 Do not touch your product's lamps when

they work for a long time. Since they would be

hot, they could burn your hand.

 Kitchen cooker hoods are designed for

normal cooking and home use. For uses other

than specified, there is the risk of failure and the

appliance becomes out of warranty.

 Comply with the rules and instructions

regarding discharge of outgoing air, stipulated by

the relevant authorities. (This warning does not

apply to uses without flue.)

 Flammable foods must not be cooked under

the appliance.

 Turn on the appliance after placing a

saucepan, pan, etc. on the cooker. Otherwise, high

temperature might lead to deformation on some

components of your product.

 Turn off the cooker's burner before taking

the saucepan, pan, etc. off the cooker.

 Do not leave hot oil on your cooker. Pots

that contain hot oil might lead to inflammation.

 Since oils could catch fire when you cook

fried foods in particular, be careful about your

curtains and tablecloths.

 Ensure timely replacement of the filters.

Filters not replaced in a timely manner pose risk of

fire due to accumulated grease deposits on them.

 Do not use non-fire-resistant filtering

materials instead of the filter.

 Do not operate your product without filter,

and do not remove the filters when the product

is in use.

 In case of any deflagration, de-energize the

cooker hood and cooking appliances. (Plug off

the appliance or turn off the main switch).

 If your product's periodic cleaning is not

made in a timely manner, it could pose risk of

fire.

 De-energize the appliance before any

maintenance operations. (Plug off the appliance or

turn off the main switch.)

 When electric cooker hood and devices fed

with energies other than electricity operate

simultaneously, the negative pressure in the room

must not exceed 4 Pa ( 4 X 10 bar ).

 Gas or fuel oil burning appliances, such as

room heaters, which share the same

environment with your product, must be fully

insulated from the exhaust of this product or

they must be hermetical.

5

 When you make a flue connection for your

product, use pipes with a diameter of 150 mm or

120 mm.

 The length of the pipe connection as well as

the number of elbows must be as minimum as

possible.

 Children must not play with the appliance.

 For your safety, use ”MAX 6 A” fuse in the

cooker hood system.

 Since the packing materials could be

dangerous, keep them away from children.

 If the feeder cable is damaged, it must be

replaced by its manufacturer or authorized

technical service or any other personnel qualified at

the same level, in order to avoid any dangerous

situation.

 In case of any deflagration, de-energize the

cooker hood and cooking appliances, and cover

the flame. Never use water to extinguish the fire.

 When cooking appliances are in operation,

their accessible parts could be hot.

 This appliance is not intended to be used by

people with physical, sensory and mental

disabilities (including children) or those who have

not adequate experience and knowledge

regarding its use, unless they are under the

supervision of a person responsible for the safety

of the appliance.

 After the installation of the cooker hood, the

minimum distance must be 65 cm between the

product and any electric cooker; and 75 cm

between it and any gas ranges or cookers

burning other fuels.

 Output of the cooker hood must not be

connected to air ducts, where there exist another

smokes.

 You must be careful when using the

appliance spontaneously with other appliances

(e.g. gas, diesel fuels, coal or wood burning

heaters, shower heaters, etc.) Attention must be

paid when using them simultaneously. It is

because the cooker hood could adversely affect

the combustion, by discharging the ambient air.

 This warning does not apply to uses without

flue.

 When electric cooker hood is used

simultaneously with devices that use gas or other

fuels, there must be sufficient ventilation in the

room (might not apply to devices that discharges

the air back into the room).

 Simultaneous operation of more than one

gas cooker leads to generation of high heat. A

ventilation appliance placed on the surface of

cookers might therefore get damaged or burn.

Do not operate two gas cookers in high heat for

more than 15 minutes. One large burner with

more than 5kW (Work) power generates power

equal to that of two gas burners.

6

2.1 Life-Threatening Danger,

Poisoning Danger

A DANGER

There are life-threatening danger and poisoning

danger due to reabsorbed combustion gases. During

the air discharge outlet use, unless sufficient air

supply is provided, do not use the appliance

simultaneously with devices that discharge toxic

gases through flue such as ventilated, gas, oil, wood

or coal burning heaters, shower heaters, water

heaters, etc.

Fig. 2: Poisoning Danger

Ventilated devices (e.g. gas, oil, wood or coal

burning heaters, shower heaters, water heaters)

take combustion air from the installation location,

and discharge the waste gas through a waste gas

system (e.g. flue). When the cooker hood is active,

it absorbs air from the kitchen and neighbouring

rooms. If adequate air entry is not provided vacuum

emerges. In such a case, the toxic gases are

absorbed from the flue and waste gas channel,

and are taken into to door again. Fig. 2

Therefore, adequate fresh air ingress must

always be ensured. Fig. 3

Fig. 3

A DANGER

Fire danger!

Due to sparkling. Installation of appliance over a

heating device that is heated by using solid fuels

(for ex. wood or coal) is only allowed if an non-

detachable cover is present. For the installation

process, attention must be paid to current

applicable construction regulations and regulations

of local electric and gas companies. Appliance

might lead to fire unless it is produced in

accordance with cleaning instructions.

A DANGER

2.2 Danger of electric shock!

Do not bend or jam the connection cable during

installation due to danger of damaged

connection cable.

A DANGER

2.3 Danger of physical injury!

 During the installation, there is a danger of

physical injury due to the sharp edges. Use

protective gloves throughout the installation

process of the appliance.

 Due to risk of dropping the appliance,

assembly of all safety bolts and covers must be

performed as specified in the user manual.

7

A DANGER

2.4 Danger of burn, danger of

electric shock!



Allow the appliance to cool before cleaning or

maintenance process. Switch off the fuse or pull

out the mains plug from the socket.

 There is risk of damage due to ingress of

moisture in the electronics. Do not clean the

control components with a wet cloth.

 The surface could be damaged due to a

wrong cleaning process. Clean stainless steel

surfaces only in their brushing direction. Do not

use a stainless steel cleaner for the control

elements.

 The surface could be damaged due to

aggressive and abrasive cleaning agents. Never

use aggressive and abrasive cleaning agents.

 There is risk of damage due to backflow of

condensate. Mount the air outlet channel

downwards from the appliance (slope of 1

°

).

A DANGER

2.5 Dangers of fire and physical

injury!

In case of repairing that is not performed

according to the rules or as required, turn off the

fuse or unplug the feeder cable of your appliance.

Repairing must be performed only by the

authorized technical service or authorized experts.

NOTE

If the appliance is faulty or damages, turn off the

fuse or unplug the feeder cable of your appliance

and call the authorized service.

NOTE

If the feeder cable is damaged, it must be

replaced by its manufacturer or its authorized

technical service or any other personnel

qualified at the same level, in order to avoid any

dangerous situation.

NOTE

If the bulbs of your appliance are faulty, turn off

the fuse or unplug the feeder cable of your

appliance. Replace the bulbs immediately to

avoid overload on other bulbs (wait for the

bulbs to cool down first)

A ATTENTION

Accessible components might be heated when

used with cooking devices.

A DANGER

Air outlet pipe of this appliance mustn't be

connected in the flue used to discharge the fume

generated by devices that use gas or other fuels.

8

3 USAGES WITH AND WITHOUT CARBON USE

You can use this appliance in exhaust air

mode and ventilated air mode.

Exhaust air mode

The absorbed air is cleaned by the grease filters,

and is discharged through a piping system. 4

Fig. 4: Air Outlet without Carbon Filter

A DANGER

Death Risk!

Exhaust gases that are reabsorbed might lead to

poisoning.

Exhaust air must not be transferred to

an active smoke or waste gas flue; or a flue

used for ventilation of the places, where heat

sources are installed.

 If you want to transfer exhaust air to an inactive

smoke or waste gas flue, you need to obtain

permission from an authorized chimney sweep.

 If exhaust air is discharged through the external

wall, a telescopic wall safe must be used.

Ventilated air mode

Absorbed air is cleaned by the grease filters and

an active carbon filter, and then it is transferred

back to the kitchen. 5

Fig. 5: Air Outlet with Carbon Filter

To retain the substances that lead to odour in

ventilated air mode, you must attach an active

carbon filter. Consult your authorized dealer for

various options available to use your appliance in

ventilated air mode. You can purchase the

accessories required for this process for related

sales points, authorized services or online sales

centre.

9

3.1 Replacement of Carbon Filter

In environments without flue, active carbon filter

must be used for filtering the air and resending it in.

Active carbon filter must be supplied from service

or your dealer. De-energize the appliance before

replacing the carbon filter. Since carbon filter is

used in kitchens with no flue outlet, it must be

replaced in every 3-5 months depending on the

use.

Carbon filter must never be washed. Grease filters

must be installed in the product, regardless of

whether or not carbon filters are used. Do not use

your product without grease filter.

3.2 Replacement of AF 90 Carbon

Filter

Fig. 6: AF 90 CARBON FILTER

The appliance you have purchased is

appropriate for use with AF 90 carbon filters.

1. Place the carbon filter in its housing. Fig. 6

2. Rotating the carbon filter clockwise,

ensure that it is completely fit. Fig. 6

If carbon filter does not fit in

completely, it might drop and damage your

product.

3.3 Replacement of AF 100 Carbon

Filter

Fig. 6: AF 100 CARBON FILTER

The appliance you have purchased is

appropriate for use with AF 100 carbon filters.

3. Place the carbon filter in its housing. Fig. 6

4. Rotating the carbon filter clockwise, ensure

that it is completely fit. Fig. 6

A DANGER

Do not wash carbon filters. Keep the carbon

filters away from children.

10

4 CLEANING AND

PREVENTIVE MAINTENANCE

A ATTENTION

 Prior to each maintenance and cleaning,

cooker hood must be unplugged, and appliance

must be dead

 Cleaning and user maintenance of the

appliance shall not be performed by unattended

children.

 The surface could be damaged due to

aggressive and abrasive cleaning agents. Never

use aggressive and abrasive cleaning agents.

Supply your cleaning and protective substances

that are appropriate for your appliance from the

authorized technical service. Surface of

appliance and control units are sensitive to

scratching.

 Clean the surfaces with a soft and damp

cloth, dish-washing liquid or mild glass cleaning

agent. Soften the dry, sticky dirt with a damp

cloth. Do not scrape!

 It is not appropriate to use dry cloths, sponges

that may scratch, materials that require rubbing, and

other aggressive cleaning agents containing sand,

soda, acid or chlorine.

 Clean the stainless steel surfaces in their

brushing direction only.

 Do not use stainless steel cleaning agents

and wet clothes for control units. Cleaning of

metal grease filters Used metal grease filters retain

the greasy particles in the moisture and vapour

generated in the kitchen. Clean the metal grease

filters about every three months, under normal use

conditions (1 to 2 hours a day).

 Do not use excessively effective, acidic or

alkaline cleaning agents.

 For cleaning the metal grease filters, clean the

holder parts of the metal grease filters in the

appliance, with a damp cloth as well.

 You can clean the metal grease filters in

the dishwasher or by hand.

4.1 Washing in Dishwasher

 In case of washing in dishwasher, a slight

change might occur in colour. This has no effect on

the function of the metal grease filter.

 Do not wash the excessively dirty metal

grease filters together with dishes.

 Place the metal grease filters loosely and

freely in the dishwasher. Metal grease filters

must be placed in the dishwasher without

jamming.

4.2 Hand Wash

For stubborn dirts, you can use a special

grease solvent. You can buy such an agent

from the authorized sales centre.

 Soften the metal grease filters in a hot water

with dish-washing liquid.

 Use a brush for cleaning and wait for the liquid

in metal grease filters to flow off completely.

 Rinse the filters thoroughly after cleaning.

A ATTENTION

Thanks to timely cleaning of metal grease filter,

the fire danger caused by excessive heat that is

generated duríng fryíng ís avoíded.

4.3 Removal/Installation of

Aluminium Filter

Pull the aluminium filter towards you by pressing on

its tab. Reverse the process to install the filter.

11

5 INSTALLATION OF APPLIANCE

Fig. 7: INSTALLATION OF APPLIANCE

After completing the installation of cooker hood, the minimum distance must be 650 mm between the

product and any electric cooker; and 750 mm between it and any gas ranges or cookers burning other

fuels. Fig. 7

5.1 Installation and Unpacking of

the Appliance

Check that your appliance is not deformed.

 Report the transport issues immediately to

transport operator.

 Any faults encountered shall be reported to

the dealer, too.

 Do not allow children to play the with

packaging materials !!!

5.2 Installation and Unpacking of

the Appliance

 Replace the carbon filters on a regular basis.

 Regularly clean your aluminium filters. Since

dirty filters would block the air passage, you

might have to use the appliance at a higher

speed.

 Use your product according to its normal

speeds.

 Use at higher speed would cause an

increase in the energy consumption.

Min. 65 cm

Min. 75 cm

12

5.3 Exhaust Air Mode

A DANGER

Death Risk!

Exhaust gases that are reabsorbed might lead to

poisoning. Exhaust air must not be transferred to

an active smoke or waste gas flue; or a flue used

for ventilation of the places, where heat sources

are installed. If you want to transfer exhaust air to

an inactive smoke or waste gas flue, you need to

obtain permission from an authorized chimney

sweep.

If exhaust air is discharged over the external

wall, a telescopic wall case must be used.

5.4 Air Discharge Line

Information:

Manufacturer of appliance

cannot be held responsible for defects caused

by laid pipes.

 Appliance shows the highest performance

when a short and flat air outlet pipe and a pipe

diameter as large as possible is used.

 Optimum ventilation performance cannot be

reached and noise of fan increases when long

and rough air outlet pipes and multiple pipe

elbows or pipe diameters smaller than 150 mm

are used.

 Pipes or hoses used in laying the air outlet

line must be made of inflammable materials.

Circular Pipes

It is recommended that inner diameter should

be 150 mm or at least 120 mm.

Flat Channels

Inner Section must be appropriate to the

diameter of circular pipes.

Ø150 mm approx. 177 cm

2

Ø120 mm approx. 173 cm

2

 Flat channels shouldn't have sharp elbows.

 Use sealing strips for different pipe diameters.

5.5 Checking the Wall

 Wall must be flat, straight and have the

sufficient bearing capacity.

 Depth of drilling holes must comply with the

length of bolts. Dowels must fit in properly.

 Bolts and dowels in the enclosure are

appropriate for use in rigid monolithic walls. Use

appropriate fasting materials for different

constructions (for ex. plasterboard, aerated

concrete, proton bricks).

5.6 Electrical Connection

A DANGER

Electric Shock Danger!

Components in the appliance might have sharp

edges. Connection cable can be damaged. Do

not bend or jam the connection cable during

installation.

Necessary connection data is provided on the

type label found inside your appliance; metal

grease filters must be removed to see the label.

Length of connection line: approx.

1.3 m

This appliance complies with EU interference

elimination guidelines.

A DANGER

5.7 Danger of Electric Shock!

It must always be possible to disconnect the

appliance from the electric network. Appliance

must be plugged in a protected contact outlet that

is mounted in accordance with the rules. If the

plug cannot be reached after installation or during

the required fixed connection, there must be

many pole separation assemblies available with

at least 3 mm contact distance to the installation.

Fixed connection must be performed by an

electronics expert only.

13

6 OVERVIEW OF APPLIANCE

Fig. 9: OVERVIEW OF COOKER HOOD

1. Front Panel

2. Key

3. Filter

4. Lighting

14

7 ASSEMBLY OF PRODUCT

Drilling the Hanger Holes

Make holes with Ø4 mm diameter on the points

marked as A, B, C, D on the mounting scheme.

Figure 2

The appliance should be mounted on the cabinet

on the points A, B, C, D by using 4 x 40 screws

provided with the appliance. The front panel

should not be rubbed against the cabinet cover

when the sliding set moves.

Figure 3

Place the plastic flue provided with the

appliance on the flue outlet on the appliance.

Rotate the plastic flue clockwise.

Figure 4

Install flexible aluminium pipe to

plastic flue outlet. Install the other

end of the pipe to the flue hole on

the wall.Figure 5

Figure 4

Figure 5

A ATTENTION

Since twists and bends in the aluminium pipe

will lead to reduction in the air suction power,

avoid using twists and bends as much as

possible.

Functions of Device

Cooker hood is used in kitchens with or without

flue.

In case of use with flue;

In flue-connected use, cooker hood must be

connected to a flue that will discharge the air.

Prefer the shortest way for the pipe system that

leads to flue, in order to get the maximum

efficiency from your cooker hood. Your product is

manufactured in a form appropriate for use with

flue.

MOUNTING

TEMPLATE SCALE

1:1

CUT-OUT LINE ON

CUPBOARD FOR

AIR

15

8 USE OF PRODUCT

3 Spd Rocker Switch

Lamp Switch

Turn the switch to lamp

position to turn on the light

of the appliance. The

sliding set must be

detached to turn on lights.

3. Circulation Switch

If you want to run the

appliance at the third

speed move the switch

down.

3. Circulation Switch

If you want to run the

appliance at the third

speed move the switch

down.

2 Spd Rocker Switch

The product has 2 lamps

and a switch to control

lighting. The sliding set

must be detached to turn

on lights.

3 Spd Dgt Switch

1- Press this button when you want to operate

the product in speed 1.

2- Press this button when you want to operate

the product in speed 2.

3- Press this button when you want to operate

the product in speed 3.

4- Press this button when you want to turn on

the product lights.

Speed Selection

Appliance has is a 3-level ventilation. One of the

low-medium-high ventilation levels is selected

according to cooking and frying vapour. It is

started by pressing the motor control buttons on

the front panel. Electronic controlled models have

automatic timer.

Timer

If you press any of the motor starting buttons for

longer than 2 seconds, a timer function shall

activate with 15 minutes duration. Display shall

also give a signal when the timer starts and the

motor shall stop automatically 15 minutes later.

Cleaning Periods of the Metal Filter:

The filters must be cleaned when "C" signal

appears on the display or (depending on usage)

after every 2-3 weeks. When the filters are

cleaned and mounted in their places, press button

( ) for more than 3 seconds in order to delete

"C" signal (when the product is inactive). Letter

"E" will appear on the display, and the product will

switch to normal operation. If the operation is

desired to continue without deleting "C" signal,

when you push on ( ) button, active operation

will be observed for 1 sec. and then "C" signal will

reappear and the motor will continue to run.

A ATTENTION

"C" mark will appear at the end of the product's

usage period of 60 hours.

1 2 3



4



5



16

5 Spd Dgt Switch

A ATTENTION

"C" mark will appear at the end of the product's

usage period of 60 hours.

On-Off: The appliance will start once

this button is pressed.

Decreasing Speed: Speed will

decrease if this button is pressed.

Increasing Speed: Speed will

increase if this button is pressed.

Timer: When the button is pushed

on, a timing function is activated for

a period of 15 minutes, and once

the timing starts, also the display

gives a signal, and the motor stops

automatically after 15 minutes.

Lamp: The lamp will turn on once

the button is pressed. Re-press the

button to turn off the lamp.

Cleaning Periods of the Filters:

The filters must be cleaned when " " signal

appears on the display or (depending on usage)

after every 2-3 weeks. When the filters are

cleaned and mounted in their places, press

button for more than 3 seconds in order to

delete " " signal (when the product is inactive)

. Letter "E" will appear on the display, and the

product will switch to normal operation. If the

operation is desired to continue without deleting

" " signal, when you push on ( ) button, active

operation will be observed for 1 sec. and then

"C" signal will reappear and the motor will

continue to run.

NOTE: “ ” mark will appear at the end of

the product's usage period of 60 hours.

Efficient Use With Regard to

Energy Saving:

* When using your hood, adjust the speed

settings according to vapour and odour

intensity, in order to save energy.

* Use low speeds (1-2) under normal

conditions, and high speeds (3) in intense

odour and vapour.

* The lamps on the hood are placed for

illuminating the cooking area.

Using them for environmental lighting shall

cause unnecessary energy expenditure and

insufficient lighting.

Use of Hood:

* Your hood contains a motor that has various

speeds.

5

17

9 REPLACEMENT OF LAMPS

A DANGER

Disconnect the electrical supply of the cooker

hood. Leave the lamps to cool down first

because they could burn your hands when they

are hot.

9.1 Replacement of Halogen Lamp

Fig. 13: Replacement of LED Lamp

Remove the aluminium cartridge filter. Remove

the faulty bulb and replace with a new one with

the same rating.Fig. 13

9.2 Replacement of Spark Plug

Lamp

Fig. 14: Replacement of Spark Plug Lamp

Remove the aluminium cartridge filter. Remove

the faulty bulb and replace with a new one with

the same rating.Fig. 14

9.3 1W Replacement of LED Lamp

 Disconnect the electrical connection of

LED lamp.

 Push on the lamp with your hand, to

remove it.

 Separate the self adhesive tape around the

lamps and the body plate from each other.

 Before placing the new LED lamp, remove

the protective folio from the frame, and then

stick it on its place on the body of the

product.

18

10 AUTHORIZED TECHNICAL SERVICE

If Lighting is Not Functioning:

 Make sure that the plug is plugged in, and that the fuses are intact.

 Check the bulbs. Make sure you unplugged the device before performing this check. Tighten

the bulbs if they are loose; you can replace the bulbs if they still doni work.

Possible Faults and What-to-Do Before Calling the Technical Service:

A) If the appliance does not work in any way:

 Check to see if the cooker hood is plugged in or if the plug is fit properly into the socket.

 Check the fuse, to which the appliance is connected, as well as the main fuse of your house.

If the performance of appliance is insufficient or it operates with too

much noise:

 Is the outlet diameter of the appliance's flue adequate? (min.120 mm).

 Are the metal filters clean? Please check.

 If you use the cooker hood without flue, make sure that the carbon filters are not older than 6

months.

 Be attentive to ventilate your kitchen adequately, in order to provide an airflow. If you are still not

satisfied with the performance of the appliance, consult the authorized technical service.

19

10.1 Potential Failures and Solutions

Description of Failure Reason Help

Appliance Does Not Work.

Check the power

connection.

Mains voltage must be 220-240 V, and

product must be plugged into a

grounded socket.

Lighting Lamp Does Not

Operate.

Check the power

connection.

Mains voltage must be 220-240 V, and

product must be plugged into a

grounded socket.

Lighting Lamp Does Not

Operate.

Check the power

connection.

Lamp switch must be at "on" position.

Lighting Lamp Does Not

Operate.

Check the bulbs. Bulbs must be operative.

Product's Air Intake is Weak.

Check the

aluminum

filter.

The aluminum cartridge filter should be

washed once a month under normal

conditions.

Product's Air Intake is Weak.

Check the air

outlet flue.

Air Outlet Flue Must Be Open.

Product's Air Intake is Weak.

Check the carbon

filter.

In products that work with carbon

filters, carbon filter must be replaced

once in every 3 months under normal

conditions.

It Does Not Discharge Air (in

flueless use)

Check the

aluminum filter.

The aluminum cartridge filter should be

washed once a month under normal

conditions.

It Does Not Discharge Air (in

flueless use)

Check the carbon

filter.

In products that work with carbon

filters, carbon filter must be replaced

once in every 3 months under normal

conditions.

10.2 Technical Table

Supply Voltage 220 - 240 V 50Hz

Insulation Class of Motor F

Insulation Class CLASS I

20

HOTTE DE CUISSON

MANUEL D'INSTRUCTIONS

CBT9240/2X

CBT6324/1X

CBT6324/1W

CBT6324/1N

CBT6130/2X

CBT6240/1LN

CBT6240/1LW

CBT6240/1LX

Il est conseillé de lire minutieusement le manuel de l'utilisateur !

La pagina sta caricando ...

Candy CBT6240/1LN Manuale utente

Questo manuale è adatto anche per

Candy CBT6240/1LN Manuale utente

Altri documenti