Siemens WM16Y790DN/20 Manuale utente

www.siemens-home.com

en Instruction Manual

and Installation

Instructions

WM16Y790DN

Washing machine

2

Your new washing machine

You have chosen a premium washing machine made by

Siemens. Thanks to its innovative technologies, the washing

machine is distinguished by its perfect washing performance and

its economic consumption of water and energy.

Please take a couple of minutes to read and become familiar

with the advantages of your washing machine.

To meet the high quality demands of the Siemens brand, each

washing machine, which leaves our factory, is inspected

thoroughly to ensure that it functions properly and is in perfect

condition.

Further information on our products, accessories, spare parts

and services can be found at: www.siemens-home.com or

contact our customer service centres.

If the instructions for use and assembly describe various models,

reference is made to the differences at the appropriate places.

Explanation of the symbols

ã Warning!

This combination of symbol and signal word indicates a

potentially dangerous situation which may result in death or

serious injuries unless it is avoided.

ã Caution!

This combination of symbol and signal word indicates a

potentially dangerous situation which may result in slight or

minor injuries or damage to property and the environment.

²

Instructions on how best to use the appliance as well as other

useful information.

3
Contents
en
Instruction Manual and Installation Instructions
Before washing
Ø Intended use 4
Ø Safety instructions 5
Ø Protection of the environment 8
Ø Getting to know your appliance 9
Ø Detergent drawer 10
Ø Operating elements/Display elements 11
Ø The main points in brief 12
Operating the appliance
Ø Before each washing 13
Ø Washing 19
Ø After washing 22
Ø Programme overview 23
Ø Programme settings/options 28
Ø ASR Stain Automatic 30
Ø Consumption values 31
Ø Appliance settings 32
Ø Sensors – Your washing machine is so intelligent 33
Cleaning and maintenance
Ø Care and maintenance 34
Ø Emergency lock release, e.g. if power failure occurs 38
Ø Information on the display panel 39
Ø Faults, what to do? 40
Ø Customer service 42
Installing the appliance
Ø Standard accessories 43
Ø Installation 45
Ø Remove transportation protection devices 49
Ø Connecting the water 51
Ø Alignment 55
Ø Electrical connection 56
Ø Before the 1st washing 58
Ø Transportation, e.g. if moving house 59
Index 60

4

Before washing

Intended use

Ø For use in the household only.

Ø The washing machine is suitable for washing machine-

washable textiles and hand-washable wool in wash liquor.

Ø The washing machine is suitable to be operated with cold

drinking water and commercially available detergents and

care products which are suitable for use in washing

machines.

Ø When dosing all detergents, cleaning aids, cleaning products

and cleaning agents, always follow the manufacturer's

instructions.

Ø The washing machine may be operated by children from 8

years of age, by persons who have limited physical, sensory

or mental abilities and by persons who have inadequate

experience or knowledge, provided they are supervised or

have been instructed by a responsible person.

Ø Keep pets away from the washing machine!

Read and follow the operating and installation instructions and all

other information enclosed with the washing machine.

Retain documents for subsequent use.

5

Safety instructions

ã Warning!

Danger of death from electric shock!

Danger of death if live parts are touched.

– Never pull out the mains plug by tugging the power

cord.

– Insert/pull out the mains plug with dry hands only.

ã Warning!

Risk to children!

– Do not leave children unsupervised near the

washing machine.

– Children must not play with the washing machine.

– This will prevent children from locking themselves

in and suffocating.

On redundant appliances:

– Pull out the mains plug!

– Sever the power cord and discard together with

the plug.

– Destroy the lock on the washing-machine door.

– Children must not perform any cleaning or

maintenance work without supervision.

– When playing, children may become entangled in

the packaging/film and packaging parts or pull

them over their heads and suffocate.

Keep packaging, plastic film and packaging parts

out of the reach of children.

6

– When washing at high temperatures, the glass of

the washing machine door becomes hot.

Prevent children from touching the hot washing

machine door.

– Detergents and care products may cause

intoxication if consumed or eye and skin irritation if

touched.

Keep detergents and care products out of the reach

of children.

ã Warning!

Risk of explosion!

Items of washing pretreated with solvent detergents,

e.g. stain remover/petroleum ether, may cause an

explosion when the washing machine has been

loaded.

Before hand thoroughly rinse items of washing by

hand.

ã Caution!

Danger of scalding!

When washing at high temperatures, you may be

scalded if you touch the hot wash liquor (e.g.

if draining hot wash liquor into a washbasin or if

draining the washing machine in an emergency). Allow

detergent solution to cool down.

7

ã Caution!

Risk of damaging appliance!

– Cover plate may break!

Do not climb on the washing machine.

– Opened washing machine door may break off or

washing machine may overturn!

Do not lean on the open washing machine door.

ã Caution!

Danger when reaching into/gripping the rotating

drum!

If you reach into the rotating drum, you may injure your

hands.

Do not grip the rotating drum. Wait until the drum stops

rotating.

ã Caution!

Risk of coming into contact with liquid detergents/

care products!

If the detergent drawer is opened while the washing

machine is running, detergent/care product may spray

out.

Caution when opening the detergent drawer.

In case of eye/skin contact, rinse thoroughly.

If accidentally swallowed, seek medical advice.

8

Protection of the environment

Packaging/Old appliance

Hints and tips

Ø Utilise the maximum amount of washing for the particular

programme.

Ø Wash normally soiled washing without Pre-wash.

Ø Instead of Cottons 90 °C programme select Cottons 60 °C

and ecoPerfect ¦ button. Comparable cleaning result with

significantly lower energy consumption.

Ø Energy saving mode: The display panel light goes out after

several minutes, Ü (Start/Pause) flashes. To activate the

light, select any button.

The energy-saving mode is not activated if a programme is

running.

Ø Automatic switch off: If the appliance is not operated for a

prolonged period, it automatically switches off before the

programme starts and when the programme has ended to

save energy. Switch on by pressing main switch # button.

Ø If the washing is then dried in the tumble dryer, select spin

speed according to the instructions of the dryer

manufacturer.

)

Dispose of packaging in an environmentally friendly manner.

This appliance has been identified in accordance with the

European Directive 2002/96/EG on Waste Electrical and

Electronic Equipment (WEEE).

The Directive specifies the framework for an EU-wide valid return

and recycling of waste appliances.

9

Getting to know your appliance

'HWHUJHQWGUDZHU

FODFN

2SHUDWLQJ

HOHPHQWV

'LVSOD\

HOHPHQWV

'UXPOLJKW

GHSHQGLQJ

RQPRGHO

'RRU

6HUYLFHIODS

2SHQLQJ DQGFORVLQJWKHGRRU 6HUYLFHIODS

10

Detergent drawer

Dispenser I Detergent for prewash

Dispenser

i

Softener, starch. Do not exceed the maximum load.

Dispenser II Detergent for main wash, water softener, bleach,

stain remover

Dispenser A for dosing liquid detergent (not for all models)

For models with insert for liquid detergent:

The detergent drawer features an insert which is used as a dosing aid for liquid detergent.

² Do not use insert:

– For gel-like detergents and washing powders.

– For programmes with Prewash or Ready in option.

Position insert for dosing liquid detergent:

Completely remove detergent drawer.

Push insert forwards.

For models without insert for liquid detergent:

Dose liquid detergent according to the manufacturer’s instructions.

11

Operating elements/Display elements

N

LM

O

P

Q

RST

O

² All buttons are sensitive, they only need to be touched gently.

i Switch on and off the appliance. Press

the

# main switch button.

j Select a programme. Rotating the in ei-

ther direction is possible. Programme

Overview, refer to ~ Page 23

Change programme settings of the selected

programme and select programme options:

k Select °C (Temperature), B (Spin) ,

0

(Finish in) buttons and change.

~ Page 17, ~ Page 28

l Select ecoPerfect ¦ or

speedPerfect G button. ~ Page 17,

~ Page 28

m Select ã (ASR Stain Automatic) button

for stain selection. Overview of all stains

~ Page 30

n Select × (Options) button for additional

programme options. Overview of all op-

tions ~ Page 28

o Start wash programme. Select Ü (Start/

Pause) button to start, interrupt and can-

cel the programme (e.g. reload wash-

ing).

p Change appliance settings. Hold down

Â 3 sec (Basic Settings 3 sec.) button

for appliance settings (end signal, button

signal, language, autom. switch off) for

approx. 3 seconds. See Overview of all

settings. ~ Page 32

q Display panel for settings and informa-

tion.

12

The main points in brief

1

@ @ @

Insert mains plug.

Turn the tap on.

Open the washing

machine door.

To switch on, press

the

# button.

Select the pro-

gramme, e.g.

Cottons.

2

@ @

Dosage: 30%

ú

Please load laundry: max. 8kg

Sort the washing. Insert the washing. Do not exceed maximum load.

3

@ @

Dosage: 70%

ú

Please load laundry: max. 8kg

Open the detergent

drawer.

Dose detergent according to dosing recommen-

dation.

Close the washing

machine door.

FODFN

4

@

If required, change programme settings of the selected programme and se-

lect programme settings/options.

Select

Ü (Start/

Pause).

5

@ @

v

Finished, remove washing

End of the programme For switching the

machine on, press

the

# button.

Turn off the mains

supply (for models

without Aqua-Stop).

13

Operating the appliance

Before each washing

²

– Install and connect washing machine properly. Refer

to ~ Page 45

– Before the 1st wash, wash once without any washing.

~ Page 58

1. Preparing the washing

Sorting the washing according to:

Ø Type of fabric/fibre.

Ø Colour.

Ø Soiling.

Ø Follow manufacturer’s care information.

Ø Care label specifications:

Protecting the washing and the machine:

²

– When dosing all detergents, cleaning aids, cleaning products

and cleaning agents, always follow the manufacturer's

instructions.

– Keep detergents and agents for the pretreatment of washing

(e.g. stain remover, prewash sprays, ...) away from the

surfaces of the washing machine. Using a damp cloth,

immediately remove any fine spray residue and other

residue/droplets.

–Empty pockets.

– Remove metal parts (paper clips, etc.).

– Wash delicates in the net/bag (tights, underwired bras).

–Close zips, button up covers.

– Brush sand out of pockets and collars.

– Remove curtain fittings or include in the net/bag.

–Wash new items separately.

< ;

Cottons 95 °C, 90 °C

: 9 8

Coloureds 60 °C, 40 °C, 30 °C

B A >

Easy-Care 60 °C, 40 °C, 30 °C

A L >

K

Delicates 40 °C, 30 °C

W A L

> K

Hand and machine-washable silk and woollens cold,

40 °C, 30 °C

Ž

Do not wash laundry in the washing machine.

14

2. Preparing the appliance

Insert mains plug.

Turn on water tap.

3. Selecting a programme and putting the washing

in the drum

1.

Open the washing machine door.

2.

Check whether the drum has been completely emptied. If

required, empty. Otherwise, the load display may malfunction.

~ Page 33

3.

Press the # button. The appliance is switched on.

The Siemens logo is indicated on the display panel and all

programme indicator lamps are lit.

Then always the Cottons programme preset at the factory is

displayed.

Displays for the Cottons programme:

– The indicator lamp is lit on the programme selector and

the main menu for the selected programme is indicated

on the display panel.

ccc c

60

°C 1600B 2:31h

bbb

15

– For appliances with drum light:

After switching on the appliance, after opening and

closing the washing machine door as well as after starting

the programme, the drum is lit. The light goes out

automatically.

4.

Select a programme.

You can use the saved programme

or select another programme, Programme Overview, refer to

~ Page 23,

or select other programmes (see

Others) and choose one

programme as follows:

other programmes selected using

Others and choose e.g.

Outdoor:

– Select programme using the buttons under the arrows.

The selection is acknowledged by a tick.

– Wait or back by pressing Main menu button, selected

programme is indicated on the display panel.

– To change the programme, select button under the black

highlighted programme and change programme.

5.

Insert the washing.

The load screen for the selected programme (e.g. for Cottons) is

indicated on the display panel. The load screen is indicated when

the door is opened or when the amount of washing is changed.

²

– Unfold and load presorted items of washing. Mix large and

small items. Washing items of different size distribute

themselves better during the spin cycle. Individual items of

washing may cause imbalances. ~ Page 33

30 °C

800

B

1:04h

Drain

Additional programms Outdoor è

Rinse

Main menu

cb

cccc

30

°C 800B 1:04h

Outdoor

bbbb

Dosage: 30%

ú

Please load laundry: max. 8kg

16

– Do not load washing until the main menu for the saved

programme is displayed after the Siemens logo.

– The load bar progresses as the washing machine is loaded. If

the max. load is exceeded, the bar flashes. Do not exceed

indicated max. load. Overfilling reduces the washing result

and encourages creasing.

4. Add detergent and fabric care product

1.

Pull out the detergent drawer.

2.

Dosing in dispenser ~ Page 10 according to:

– Dosage recommendation on the display panel,

e.g. for Cottons:

Depending on the amount of washing in the washing

machine, a dosing recommendation is indicated on the

display panel.

–Soiling,

– Water hardness (ask your water supply company),

– Manufacturer’s instructions.

²

– When dosing all detergents, cleaning aids, cleaning products

and cleaning agents, always follow the manufacturer's

instructions.

– Dilute viscous fabric softener and fabric conditioner with

water.

Prevents blockage of the overflow!

5. Changing the settings of the selected programme

²

Take care not to trap any items of clothing between the loading

door and rubber seal.

Close the door.

The main menu for the selected programme is indicated again on

the display panel.

Dosage: 70%

ú

Please load laundry: max. 8kg

FODFN

cccc

60

°C 1600B 2:31h

bb b

17

You can use the displayed presettings or adjust the selected

programme optimally to the items of washing by changing the

presettings or selecting additional settings/options.

Ø Changing the °C (Temperature), B (Spin), 0 (Finish in).

Refer to ~ Page 28:

e.g. selecting and changing the °C (Temperature):

The arrows on the display panel indicate which buttons are

used to change the settings. The settings are active without

acknowledgement and are displayed in the main menu.

²

– If the buttons are held down, the set values automatically run

through.

– The respective programme duration is displayed by selecting

the programme. The programme duration is adjusted while

the programme is running if the programme duration requires

changing, e.g. due to changes in the programme settings/

options, foam detection, unbalanced load detection, the load

or soiling.

Ø ecoPerfect ¦:

for saving energy with a comparable washing effect to the

standard programme. When selected, the display lamp is lit.

Ø speedPerfect G:

for a shorter wash time with a comparable washing effect to

the standard programme. Observe maximum load.

~ Page 23 When selected, the display lamp is lit.

Ø ã (ASR Stain Automatic). Overview of all stains ~ Page 30

Do not let stains dry. Remove solid substances beforehand.

Arrange items of washing as usual and load washing

machine. Select the programme. Select a stain type

(depending on the selected programme).

cccc

70

60°C

1600B 2:31h

50

bb b

18

Select ã (ASR Stain Automatic) button and select e.g. grass:

– Select/deselect stain using displayed buttons. Stain option

is immediately active and is indicated on the display

panel.

– Wait or back by pressing Main menu or

ã (ASR Stain

Automatic) button.

Ø ß (Options) Overview of all options ~ Page 28

Select ß (Options) and e.g. z Water Plus buttons:

– Select option by pressing the two buttons displayed on the

left.

– Select/deselect option by pressing the two buttons

displayed on the right. The selected options are

immediately active.

In the case of multi-level settings keep touching the

buttons to run through the settings automatically.

– Wait or back to the main menu by pressing

ß (Options)

button.

6. Starting the programme

Ø Select Ü (Start/Pause). The indicator light is on.

60°C

1600

B

2:31h

μ

soil + sand

ã Stains μ grass è

coffee

Main menu

bc

60°C

1600

B

2:31h

z

Extra rinse

zWater Plus

on

è

bcbc

19

Washing

During the wash cycle the programme progress is indicated by a

bar on the display panel. The bar progresses in the course of the

wash cycle and provides information about the current

programme progress.

The arrows are switched on and off according to the programme

progress. They indicate the programme settings/options which

can be changed/added as the programme progresses.

Some programme sequence steps explained:

Ø Load adjust active ~ Page 33

Ø Prewash, wash, rinse, spin, drain ... are displayed during the

wash cycle.

Ø Extra rinse: foam~ Page 21

Ø Other displays ~ Page 39

During washing

Ø Childlock

To prevent the set functions of the washing machine from

being accidentally changed, the childproof lock can be

activated.

Activate/deactivate: press

0 (Finish in) for approx.

5seconds.

Display panel goes back to the Main menu after approx.

3seconds.

cc c

60°C

1600

B

2:31h

z

Load adjust active

bb

wChildlock has been activated

20

If the programme selector is adjusted or a button is selected

while the childproof lock is active, the w symbol flashes

briefly.

Ø Topping up washing

When the programme has started, washing can be reloaded

or taken out as required.

Select Ü (Start/Pause).

²

– If there is a high water level, high temperature or if the drum

is rotating, the washing machine door remains locked for

reasons of safety and reload is not possible. Follow the

information on the display panel. To continue the pro-

gramme, select the

Ü (Start/Pause) button. The washing

machine door is locked and the programme continues

automatically.

– Load display is not active during relosding.

– Do not leave washing machine door open for a prolonged

period – water could run out of the washing.

Ø Changing the programme sequence

if you have mistakenly started a wrong programme:

1. Select Ü (Start/Pause).

2. Select another programme.

3. Select Ü (Start/Pause). The new programme starts from

the beginning.

Ø Cancelling the programme

For programmes at high temperature:

1. Select Ü (Start/Pause).

2. Cool down washing: select Rinse (see

Others).

3. Select Ü (Start/Pause).

For programmes at low temperature:

1. Select Ü (Start/Pause).

2. Select Spin * or Drain *.

(* see

Others)

3. Select Ü (Start/Pause).

cc c

60°C

1600

B

2:31h

Pause: Reload is possible

bb

La pagina sta caricando ...

Siemens WM16Y790DN/20 Manuale utente

Questo manuale è adatto anche per

Siemens WM16Y790DN/20 Manuale utente

in altre lingue

Documenti correlati

Altri documenti