TensCare NOURI DUO Manuale utente

1

User Manual

Manual del usuario

Mode d’emploi

Benutzerhandbuch

Manuale d’uso

2

Contents

Introduction 3

Kit Contents 3

Pump Parts 3

Cleaning and Sterilising 4

Installation Guide 5

Pump Controls and Display 6

Mode Settings 7

Pumping with Nouri Duo 8

Storing Breast Milk 10

Preparing Breast Milk 10

Feeding Breast Milk 11

Charging your Nouri Duo 11

When to start using Nouri 11

Troubleshooting 12

Warnings 12

Technical Information 13

Warranty 14

3

Kit Contents

1 x Duo electric pump

2 x Bottle (150ml)

2 x Feeding teat and cap

2 x Diaphragm cap

2 x Shield connector

2 x Breast shield

2 x Shield cover

Introduction

Nouri Duo is an automatic breast pump, designed to provide optimal

comfort and performance whilst you express milk. The dual-pump allows

you to express milk from both breasts simultaneously whilst the soft massage

cushions gently stimulate milk ow. Eight suction levels ensure comfortable

and quick pumping, so that mothers can enjoy every expression. The

integrated LCD screen clearly displays suction level, working mode and

battery level. Nouri Duo has a built-in rechargeable battery and integrated

lights, allowing you to pump day and night in complete comfort.

2 x Bottle cap

2 x Diaphragm

4 x Bottle valve

2 x Tube

1 x Bottle dock

1 x USB cable

Pump Parts

Electric Pump

Tube

Teat Cap

Teat

Shield

Connector

Bottle Valve

Diaphragm

Cap

Diaphragm

Breast Shield

Bottle

4

Cleaning and Sterilising

Before using for the rst time

Clean and sanitise the below parts before using your Nouri Duo for the rst

time. Use the following cleaning and sanitising instructions.

• Breast shield

• Shield connector

• Bottle valve

• Bottle

After each use

Clean all parts that come in contact with your breast and breast milk.

• Separate all parts, remembering to remove the bottle valve from the

shield connector.

• Rinse the parts in cool water to remove breast milk residue.

Washing in sink

• Soak all parts in warm soapy water for 5 minutes and then clean with a

clean dish-cloth or soft brush.

• Rinse all parts that come in contact with your breast and breast milk with

clear water.

• Allow parts to dry.

Washing in dishwasher

• Wash all separated parts on the top rack of the dishwasher.

• Allow all parts to dry.

Sanitise daily

• Wash hands thoroughly.

• Separate all parts that come in contact with your breast and breast milk,

remembering to remove the bottle valve from the shield connector.

• Immerse parts in boiling water for 10 minutes using a household pot.

• Allow water to cool before removing parts from the water.

• Place parts on a clean surface and/or towel and allow to dry.

Tubing and Electric Pump Unit

• Turn off the breast pump.

• Unplug the pump from any power source.

5

• Separate the tube from the pump and bottle.

• Wipe the electric pump unit and tube with a clean, damp cloth.

Caution:

Only use drinking tap water or bottled water for cleaning.

Separate and wash all parts that come in contact with the breast and milk

immediately after use to avoid milk residue drying and to prevent bacteria

growth.

Do not store wet or damp parts.

During sanitising with boiling water, prevent the parts from touching the side

of the pot. This can cause the parts to deform or be damaged.

Nouri is for single person use. To avoid contamination, please do not share

the pump.

Note:

Wash the Nouri Duo parts that come in contact with the breast and breast

milk after every use.

Sanitise the Nouri Duo parts that come in contact with the breast and breast

milk once a day.

Be careful not to damage parts during cleaning.

1. Wash your hands

thoroughly with

soap and water.

2. Insert diaphragm into

the connector and

make sure the edge

is engaged.

3. Put diaphragm cap

on the connector and

align the triangle marks

on both components.

The angle should be

roughly 35 degrees.

Installation Guide

6

5. Engage the breast

shield with the spout

of the connector and

make sure they are

xed securely.

6. Insert the valve into the

connector and make

sure they are xed

securely.

7. Screw the bottle into

the shield connector

assembly.

8. Plug one side of the tubing into the

diaphragm cap. Connect the other

side of the tubing with the airhole

plug on the pump unit.

Pump Controls and Display

1. ON/OFF

2. Suction Increase: Increase suction force

4. Screw the

diaphragm cap

clockwise.

1

6

7

8

9

10

11

12

2

3

4

5

7

Mode Suction Level Frequency (cycles/min)

Massage 1-5 45 50

Expression 1-12 20 24 28 32

Mode Settings

3. Suction Decrease: Reduce suction force

4. Mode Switch: Switch between massage mode and expression mode.

5. Night Lamp: Press to turn on/off the lamp. Press once for low brightness,

twice for high brightness.

6. Massage mode indicator: Indicates the mode

7. Frequency: Shows pumping frequency. Frequency is adjusted by pressing

and holding the mode switch button until the frequency indicator ashes.

Use increase and decrease to select pumping frequency.

8. Suction level: Shows suction levels. Use increase and decrease to select

suction level.

9. Pause/work indicator

10. Battery level indicator: Flashing icon means battery is low.

11. Power indicator: indicates the power adapter is connected and the

pump is being charged.

12. Time of working: shows how long the pump has been used since turning

on (default expression time is 30 minutes).

8

4. When turning on,

massage mode

will begin. Use

the increase and

decrease buttons to

nd a comfortable

suction level.

5. To adjust pumping

frequency, press

and hold mode

switch button until

the frequency

indicator ashes. Then

use increase and

decrease to select

pumping frequency.

6. After 2 minutes,

expression mode

will automatically

begin. Again, select

a comfortable

suction level and

frequency.

1. Wash your hands

thoroughly with

soap and water

and make sure that

your breast is clean.

2. Place the breast

pumps onto your

breasts. Make sure

that you centre

your nipples. If only

pumping one breast,

make sure to insert

the tube plug on the

electric pump.

3. Turn on the Nouri

Duo by holding

the power button.

Note pumping will

start automatically

so make sure the

breast is positioned

correctly before

switching on the

pump.

Pumping with Nouri Duo

9

7. Stop pumping

when the milk stops

owing or when the

bottle is full. To turn

off, hold the power

button.

8. Remove the tube

from the bottle

assembly.

9. Unscrew the bottle

from the shield

connector. Use

the bottle cap

to seal the bottle

for storage or the

feeding teat for

feeding.

Note:

• The pump will run for 30 minutes before automatically turning off. A single

expression should not last longer than 20 minutes.

• User can pause the expression by tapping the power button. To begin

pumping again, tap the power button again.

• Both breasts must use the same pumping settings.

• Night light has 2 brightness settings. Press the light button to cycle between

OFF, low brightness and high brightness.

Advice

• Hot compress your breast before pumping. Pumping after a bath can be

useful as the body is warm.

• Whilst you are breastfeeding, pump milk on the other breast, or pump

surplus milk after feeding.

• Change the placement position on the breast to stimulate milk secretion

• Practice using Nouri until you nd the approach that works best for you. If

discomfort occurs during use, please consult a doctor.

10

Warning:

• Do not refreeze thawed milk.

• Do not mix fresh breast milk with thawed milk.

Note:

• Fresh breast milk should be stored in refrigerator or freezer.

• Be sure to date the milk for storage. Mild should be stored in a refrigerator

for no longer than 48 hours and the freezer for no longer than 3 months.

• When freezing, maximum milk volume should be ¾ of storage bottle. Milk

can expand during freezing.

Preparing Breast Milk

• If the milk is refrigerated, put the milk container in warm water to heat the

milk. Shake the container to warm the milk through.

• If the milk is frozen, defrost in the refrigerator 24 hours prior to using. Once

defrosted, warm it as refrigerated milk.

Using milk heater:

Turn on milk heater and set it to 400C. Put milk container into heater.

Layers of liquid may for when using frozen milk. This is normal. Please shake

bottle well before feeding.

Warning:

• Do not heat thawed milk again.

• Do not use microwave oven to defrost breast milk.

• Do not heat milk with boiling water.

• If hot water is used to heat milk, please try milk temperature before

feeding.

Storing Breast Milk

Storage location Temperature Max. storage duration

Room 16-29 0C (60-85 0F) 4 hours

Refrigerator 4 0C (39 0F) 4 days

Freezer <-4 0C (25 0F) 0-6 months

The above only applies for infants one month of older. Please consult a

doctor for more details.

11

Feeding Breast Milk

It is recommended that breastfeeding is well established prior to bottle

feeding your baby.

• Always inspect the bottle, teat and other parts before and after each use.

If the teat appears cracked or torn, stop using immediately.

• To prevent possible choking hazard, test the strength of teat by pulling on

bulb portion of the teat.

• Do not attempt to enlarge the teat hole.

• Infants must not be bottle fed without adult supervision.

• The teat should not be used as a pacier.

• Clean and disinfect the bottle before rst use and after every use.

Charging your Nouri Duo

To charge the Nouri Duo, connect the USB charging cable to the pump and

a power socket. The charging indicator and battery level will show on the

display.

When fully charged, the battery indicator will stop ashing and show a full

battery.

The Nouri Duo can be used during charging if needed.

The battery has a charge time of 3 hours and will last for 90 minutes before

needing to be recharged.

When to start using Nouri

1. If you start breastfeeding successfully, we suggest to start using Nouri after

regular milk secretion and feeding is formed. (Breast pumps are usually

used 2-4 weeks after the baby is born)

2. Nouri Pump should be used in the following circumstances

• If you cannot start breastfeeding, regular pumping helps establish and

sustain milk secretion.

• When you feed your baby in hospital.

• When you feel your breast is swelling or painful, you can pump milk

between feeding to release discomfort.

• If your nipple is painful or cracked and therefore unable to feed your

baby, you can pump milk until the nipple recovers.

• If you have to leave your baby for a period of time and therefore not

breastfeed regularly, you can pump milk to keep functional milk secretion.

12

Troubleshooting

Problem Possible causes Solution

Pump does

not work

• Empty battery • Recharge battery

Low suction

force

• Air leakage at connection

positions (Valve, diaphragm,

silicone breast shield, tubing)

• The output air path of breast

pump is blocked, e.g. the

suction pipe is pressed or

bent, or there are sundries in

the pipe

• No cause found

• Check all connecting

parts to make sure they

are installed properly

• Straighten or clean air

tubing

• Please contact supplier

No suction

• Valve is not installed or

damaged due to

deformation

• No case found

• Reinstall or replace

valve

• Please contact supplier

Warnings

• This product is a precision electronic appliance. Please do not use it during

bathing. Please keep it in a cool, dry and ventilated place, avoid direct

sunlight, and keep it out of the reach of children.

• Unplug the power adapter after use.

• This product is for personal use only. Do not use it between more than one

person to avoid cross infection.

• Do not use a breast pump during pregnancy, because early breastmilk

expression will stimulate uterine contraction which may lead to abortion.

• Do not forcibly remove breast shield from breast. Please power off and

gently release the seal between the breast and the breast shield, and

then remove breast shield from the breast.

• When disassembling or assembling the pump, make sure to assemble

each part according to the Installation Guide. When disassembling and

cleaning, please be careful not to misplace/lose the small parts.

• Set the suction level according to individual physique to ensure

comfortable milk expression.

• Please clean with water and disinfect before use.

13

Technical Information

Model Number K-NRIDUO

Power Input AC100-240V, 50-60Hz, 0.3A

Power Output 5V-1A

Rated Power 3.6W

Battery Capacity 3.7V/800mAh

Net Weight 367g

Executive Standard GB 4806.7-2016 GB 4806.11-2016 GB 4806.2-2015

14

Should repair be needed within

the warranty period, please return

the device with the following

details:

1. Name:

2. Address:

3. Telephone:

4. E-mail:

5. Date of Purchase:

6. Proof of Purchase:

Returns should be sent to the

following address:

TensCare Ltd

PainAway House,

9 Blenheim Road,

Longmead Business Park,

Epsom, Surrey

KT19 9BE, UK

For more information, please call +44 (0) 1372 723 434.

Warranty

This product is warranted to be free from manufacturing defects for one year

from the date of purchase. This warranty is void if the product is modied or

altered, is subject to misuse or abuse; damaged in transit; lack of responsible

care; is dropped; if damage occurs by reason of failure to follow the written

instruction booklet enclosed; or if product repairs are carried out without

authority from TensCare Ltd.

We will repair, or at our option replace free of charge, any parts necessary

to correct material or workmanship, or replace the entire unit and return

to you during the period of the warranty. Otherwise, we will quote for any

repair which will be carried out on acceptance of our quotation. The

benets conferred by this warranty are in addition to all other rights and

remedies in respect of the product, which the consumer has under the

Consumer Protection Act 1987.

Our goods come with guarantees that cannot be excluded under the UK

consumer Law. You are entitled to have the goods repaired or replaced if

the goods fail to be of acceptable quality.

Before you send your unit for service please be sure to read the

user manual and follow all the instructions.

15

Contenido

Introducción 16

Contenido 16

Partes de la Bomba 16

Limpieza y Esterilización 17

Guía de Instalación 18

Controles y Pantalla de la Bomba 19

Ajustes del Modo 20

Bombeo con Nouri Duo 20

Almacenamiento de la Leche Materna 22

Preparar la Leche Materna 23

Alimentación de la Leche Materna 23

Cargando tu Nouri Duo 23

Cuándo empezar a usar Nouri 24

Solución de Problemas 24

Advertencias 25

Información Técnica 25

Garantía 26

16

Contenido

1 x cuerpo del extractor de leche

2 x tubos

2 x tapa de pezón

2 x pezón +anillo de pezón

2 x escudo de silicona para el pecho

2 x tapa de diafragma

2 x diafragma

2 x conector del escudo del pecho

4 x válvula

2 x botella

1 x USB cable

Introducción

Nouri Duo es un extractor de leche automático, diseñado para

proporcionar una comodidad y un rendimiento óptimos mientras se

extrae la leche. La doble bomba permite extraer leche de ambos pechos

simultáneamente, mientras que los suaves cojines de masaje estimulan

suavemente el ujo de leche. Ocho fuerzas y rápido, para que las madres

puedan disfrutar de cada extracción. La pantalla LCD integrada muestra

claramente la fuerza de succión, el modo de trabajo y el nivel de la batería.

Nouri Duo tiene una batería recargable incorporada y luces integradas, lo

que le permite bombear día y noche con total comodidad.

Partes de la Bomba

Cuerpo del

extractor de

leche

Tubos

Tapa de pezón

Pezón +anillo

Conector del

escudo del

pecho

Válvula

Tapa de

diafragma

Diafragma

Escudo de silicona

para el pecho

Botella

17

Limpieza y Esterilización

Antes de usar por primeravez

Limpia y desinfecta las partes de abajo antes de usar tu Nouri Duo por

primera vez. Siga las siguientes instrucciones de limpieza y desinfección.

• Escudo de silicona para el pecho

• Conector del escudo del pecho

• Válvula

• Botella

Después de cada uso

Limpia todas las partes que entran en contacto con tu pecho y la leche

materna.

• Separa todas las partes que entran en contacto con el pecho y la

leche materna, recordando quitar la válvula del biberón del conector

de la pantalla.

• Separa todas las partes que entran en contacto con el pecho y la

leche materna.

Lavar en el fregadero:

• Remoje todas las partes en agua tibia y jabonosa durante 5 minutos y

luego limpie con un trapo de cocina limpio o un cepillo suave.

• Enjuague todas las partes con agua clara.

• Deje que las partes se sequen.

Lavado en el lavavajillas:

• Lavar todas las partes separadas en la rejilla superior del lavavajillas.

• Deje que todas las partes se sequen.

Saneado diario

• Lávate bien las manos.

• Separa todas las partes que entran en contacto con el pecho y la leche

materna, recordando quitar la válvula del biberón del conector de la

pantalla.

• Sumergir las partes en agua hirviendo durante 10 minutos usando una olla

doméstica.

• Deje que el agua se enfríe antes de sacar partes del agua.

• Coloca las piezas sobre una supercie limpia y/o una toalla y déjalas

secar.

Precaución:

Sólo usa agua del grifo o agua embotellada para la limpieza.

Separe y lave todas las partes que entren en contacto con el pecho y la

18

leche inmediatamente después de su uso para evitar que los residuos de la

leche se sequen y para prevenir el crecimiento de bacterias.

No guarde las partes húmedas o mojadas.

Durante la higienización con agua hirviendo, evitar que las piezas toquen el

lado de la olla. Esto puede causar que las partes se deformen o se dañen.

El Nouri es para uso de una sola persona. Para evitar la contaminación, por

favor no comparta la bomba.

Nota:

Lave las partes de Nouri Duo que entran en contacto con el pecho y la

leche materna después de cada uso.

Desinfectar las partes de Nouri Duo que entran en contacto con el pecho y

la leche materna una vez al día.

1. Lávate bien las

manos con agua y

jabón.

2. Inserte el diafragma

en el conector

y asegúrese de

que el borde esté

encajado.

3. Ponga la tapa del

diafragma en el

conector y alinee las

marcas triangulares de

ambos componentes.

El ángulo debe ser de

aproximadamente 35

grados.

4. Enrosca la tapa del

diafragma en el

sentido de las agujas

del reloj.

Guía de Instalación

5. Enganche el escudo

del pecho con el

pico del conector y

asegúrese de que

estén bien jados.

6. Inserta la válvula en el

conector y asegúrate

de que estén bien

jadas.

19

7. Atornille la botella

en el conjunto

del conector del

escudo.

8. Conecta un lado del tubo en la tapa del

diafragma. Conecte el otro lado del tubo

con el tapón del oricio de aire de la

unidad de bombeo.

Controles y Pantalla de la Bomba

1

6

7

8

9

10

11

12

2

3

4

5

1. ON/OFF

2. Aumento de succión: Aumentar la fuerza de succión

3. Disminución de succión: Reducir la fuerza de succión

4. Interruptor de modo: Cambiar entre el modo de masaje, el modo de

expresión.

5. Lámpara de noche: Pulse para encender o apagar la lámpara. Presione

una vez para un brillo bajo, dos veces para un brillo alto.

6. Indicador del modo de masaje

7. Frecuencia: Muestra la frecuencia de bombeo. La frecuencia se ajusta

pulsando y manteniendo el botón del interruptor de modo hasta que

el indicador de frecuencia parpadee. Use aumentar y disminuir para

seleccionar la frecuencia de bombeo.

8. Nivel de succión: Muestra los niveles de succión. Use aumentar y disminuir

para seleccionar el nivel de succión.

9. Indicador de pausa / trabajo

20

Modo Nivel de succión Frecuencia (ciclos/min)

Masaje 1-5 45 50

Expresión 1-12 20 24 28 32

Ajustes del Modo

1. Lávate bien las

manos con agua y

jabón y asegúrate

de que tu pecho

esté limpio.

2. Coloque los

extractores de leche

en sus pechos.

Asegúrese de centrar

los pezones. Si sólo se

extrae leche de un

pecho, asegúrese de

insertar el enchufe del

tubo en el extractor

eléctrico.

3. Encienda el Nouri

Duo manteniendo el

botón de encendido.

Tenga en cuenta que

el bombeo se iniciará

automáticamente,

por lo que debe

asegurarse de que

el pecho esté en la

posición correcta

antes de encender el

bombeo.

Bombeo con Nouri Duo

10. Indicador del nivel de la batería. El icono parpadeante signica que la

batería está baja.

11. Indicador de energía: indica que el adaptador de energía está

conectado y que la bomba se está cargando.

12. Tiempo de funcionamiento: muestra el tiempo que la bomba ha sido

utilizada desde que se encendió (el tiempo de expresión por defecto es

de 30 minutos).

La pagina si sta caricando...

TensCare NOURI DUO Manuale utente

TensCare NOURI DUO Manuale utente

in altre lingue