Siemens WM14Q440BY Manuale utente

Categoria
Lavatrici
Tipo
Manuale utente
1 2 3 4 5
6
End of programme when ...
... (Start/Reload)flashes and - ¯- appears on the display panel.
Note: If display panel lighting is switched off, press any button a Energy
saving mode, page 5.
Interrupting the programme
Programmes at high temperatures:
Cool washing: Select mRInse/cSpin.
Press (Start/Reload).
Programmes at lower temperatures:
Select
mRInse/cSpin (deactivate h(Extra rinse) button) or
l
Empty.
Press (Start/Reload).
Changing the programme if ...
... you have selected the wrong programme by mistake:
Reselect the programme.
Press (Start/Reload). The new programme starts from the
beginning.
Reloading laundry if ... apage 5
... Press (Start/Reload); both the symbols § + r are displayed on
the display panel. If ǯ is lit, the washing machine door cannot be opened.
Press (Start/Reload).
Correct installation according to the separate
installations actions.
Checking the machine
Never use a damaged machine!
Contact customer service!
Connecting the mains plug
Make sure your hands are dry!
Handle the plug only!
Turning on the tap
Compartment II: detergent for the main wash, water softener,
bleach, stain remover
Sorting and loading laundry
Follow the manufacturer's care information!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load aPage 7.
Observe important information! aPage 6
Wash laundry of different sizes in the same wash programme.
Close the door. Take care not to trap items of laundry between the washing machine door and
seal.
Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your water supply company) and
manufacturer's instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
Your washing machine
Congratulations on having opted for a modern, high-quality domestic appliance
manufactured by Siemens. This washing machine is distinguished by its economical
energy consumption.
Each machine that leaves our factory has been inspected thoroughly to ensure that it
functions properly and is in perfect condition.
For further information on our products, accessories, spares and services, consult our
website www.siemens-home.com or contact any of our customer service centres.
You can find the contact details for your nearest after-sales service here or in the after-
sales service directory (depending on model).
GB 0844 8928999
(calls from a BT landline will be charged at up to 3 pence
per minute. A call set-up fee of up to 6 pence may apply)
IE 01450 2655
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with environmental guidelines.
This appliance is certified in accordance with European Directive 2002/96/CE on the
waste electrical and electronic equipment (WEEE).
This directive provides the framework for the EU-wide collection and reuse of used
appliances.
Intended use
Contents Page
ʋ Intended use .......................................................................................1
ʋ Programmes ........................................................................................1
ʋ Setting and adjusting the programme ...........................................3
ʋ Washing ...........................................................................................3/4
ʋ After washing ......................................................................................4
ʋ Individual settings ..........................................................................5/6
ʋ Important information ....................................................................... 6
ʋ Overview of programmes ................................................................7
ʋ Safety instructions .............................................................................8
ʋ Consumption values .........................................................................8
ʋ Care and cleaning .............................................................................9
ʋ Information on the display panel ....................................................9
ʋ Maintenance .................................................................................... 10
ʋ What to do if ... ................................................................................ 11
Protection of the environment/Conservation tips
Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
Wash normally soiled laundry without a pre-wash.
Instead of
Ê
Cottons90 °C, choose the programme
Ê Cottons 60 °C with the additional function ecoPerfect j.
Comparable cleaning result was significantly lower energy
consumption.
Measure the detergent according to the manufacturer's
instructions and water hardness.
If the laundry is then dried in the tumble dryer, select spin speed
according to instructions of dryer manufacturer.
Preparation
Before the first wash,
run a wash cycle with no laundry in the machine aPage 9.
Setting** and adjusting programmes
Programmes
Detailed overview of programmes apage 7.
Temperature and spin speed can be selected individually,
irrespective of the selected programme and programme
progress.
ÊCottons
Hard-wearing fabrics
oc+ Prewash
Hard-wearing fabrics, prewash
IEasy-Care
Synthetic fabrics
oc+ Prewash
Synthetic fabrics, prewash
Mix
Different types of laundry
Delicate/Silk
Delicate washable fabrics
Écÿ Wool
Hand/machine washable wool
mRInse/cSpin
Laundry washed by hand, h(Extra rinse) button acti-
vated; if only using the spin cycle, deactivate the button
Empty Drain rinsing water with c(without final spin)
j Mud
è Grass
Hard-wearing and easy-care fabrics, special stain
programme apage 5
\ Sweat
6cSuper 15
Short programme
$ Sportswear
Fabrics made from microfibre
Dark Wash
Hard-wearing fabrics
Washing
1
2
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: turn the programme selector to l
Empty
or select the spin speed.
Choose (Start/Reload).
Remove any foreign objects. Risk of rusting.
Leave the washing machine door and detergent door open
so that any residual water can evaporate.
Turn the tap off
Not required for Aqua-Stop models aRefer to Installation instructions.
Switching off
Turn the programme selector to Off.
Washing
Compartment ~: Fabric softener, bleach
Compartment I: Detergent for prewash
ʋ for domestic use only,
ʋ for washing machine-washable fabrics and
hand-washable wool in detergent solution,
ʋ to be operated with cold or cold and hot (max. 60 ºC)
drinking water, depending on model, and commercially
available detergents and care products which are suit-
able for use in washing machines.
.
Do not leave children unattended near the
washing machine.
The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
Keep pets away from the washing machine.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Individual settings
ʑ
Option buttons
You can change the spin speed and the temperature before the selected programme starts and while it is running. The
effects depend on the programme progress.
ʑ
°C (Temperature )
You can change the displayed washing temperature. The maximum selectable temperature depends on the current
programme.
ʑ
(spin speed in rpm/ (without final spin))
You can change the displayed spin speed. The maximum selectable spin speed depends on the model and which
programme is currently selected.
ʑ
(Ready in)
When you select the programme, the relevant programme duration is displayed. You can delay the end of the
programme before it begins. The ready in-time can be set in increments of one hour up to a maximum of 24 hours. Press
the (Ready in) button until the required number of hours is displayed (h = hour). Choose (Start/Reload).
ʑ
Additional functions aOverview of programmes, page 7
speedPerfect i For washing in a shorter time with a washing outcome comparable to that of the standard programme.
Maximum load aOverview of programmes, page 7.
ecoPerfect j For saving energy with a washing performance comparable to that of the standard programme.
S(Reduced
Ironing)
Special spin sequence with subsequent fluffing. Gentle final spin: residual moisture in the laundry
slightly increased.
h(Extra rinse)
Additional rinse cycle. For areas with very soft water or for further enhancing the spin result.
ʑ
Childproof lock
sin the
display panel
You can lock the washing machine to prevent the functions you have set from being changed
inadvertently.
ON/OFF: after the start/end of the programme, press and hold (Start/Reload) for approx. 5
seconds.
Note: The childlock can remain activated until you wish to start the next programme, even after
switching off the machine.
Then you can deactivate the childlock before starting the programme and activate it again as
necessary once the programme has started.
Note:
The s symbolis lit: Childlock active.
The s symbolflashes: Childlock active and then the programme selector is altered. To prevent
the programme from stopping, move the programme selector back to the original programme,
the s symbol is lit again.
ʑ
Reloading
§ + or
in the display
panel
Press (Start/Reload) if you want to add additional items of laundry after the programme has
started. The machine checks whether reloading is possible.
§ + r are lit: reloading is possible.
ǯ flashes: wait until § + r are lit.
Note: do not open the door until both the § + r symbols are lit.
ǯ: it is not possible to reload.
Note: for safety reasons, the washing machine door remains locked when the water level and/or
temperature is high, or during spinning.
To continue the programme, press the (Start/Reload)button.
ʑ
Stain programmes
Do not let stains dry. Remove any solid residue beforehand. Sort items of laundry as usual and load the washing machine.
The washing machine adjusts the washing temperature, drum movement and soaking times to suit the type of stain. Hot
or cold water, gentle or intensive washing control (thanks to the new drum structure) and a long or short soaking time
ensure that the wash programme has a special sequence for each type of stain.
The result: optimum stain treatment without the use of additional special detergents.
ʑ
Energy saving mode
The display panel lighting goes out after a few minutes, (Start/Reload) flashes. Press any button to switch on the
lighting.
ʑ
(Start/Reload)
To start the programme or to subsequently load additional laundry, and to activate/deactivate the childproof lock.
Individual settings
z
ʑ
Signal
Important information
Protecting the laundry and the machine
When determining the dosage of all washing powders, additives and cleaning agents, you must follow the
manufacturer's instructions..
Empty all pockets
Check for metal items (paper-clips, etc.).
Wash delicates in a laundry bag (tights, curtains, underwired bras).
Fasten zips, do up any buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additional function speedPerfect. i
Pre-treat any stains as necessary.
intense wash Load less laundry. Choose a programme with a prewash.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the
programme selector to Ê
Cottons
30 °C and press (Start/Reload). After approx. 10 minutes, press (Start/
Reload) to pause the programme. Once the required soaking time has elapsed, press (Start/Reload)again to
continue the programme, or select a different programme.
Starch Laundry should not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordance with the
manufacturer's instructions into fabric softener compartment ~ (rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
manufacturer's instructions. Do not use the washing machine for bleaching clothes.
Insert for liquid detergent depending on model
Position the insert for dispensing liquid detergent:
 Remove the detergent drawer completely a page 9
 Slide the insert forwards and click into place.
Do not use the insert (slide upwards): for gel detergents and washing powder,
for programmes with oc+ Prewash and end time option.
Set to o
1 step, the
display panel
lights up
press and
hold
+
1 step, release
set to o
setting the
volume*
setting the
volume*
1 step
* if necessary, select the
function several times
1. Activating the mode
for setting the signal
volume
2. Setting the volume
for...
direct
Button signals Information signals
j
j
3
Detergent drawer with
compartments I, II, ~
Door
Drum
Control panel
Service door
: - 90 ºC ºC (temp.) Select the temperature (: = cold)
- 1400* c (rpm) Select the spin speed (* depending on the model) or c(without final
spin, laundry soaks in the last rinsing water, display panel - - - )
1 - 24 h  (Ready in) End of programme after ...
Status displays Programme sequence displays:
1üü2üücü- ¯- Wash, rinse, spin, programme duration or end (-0-)
s Childproof lock apage 5
r Open the washing machine door, reload laundry apage 4, 5
Display panel /
option buttons
Additional functions Start /
Reload
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either direction.
**If the s symbol flashes in the
display panel, the childproof lock is
active aDeactivate childproof lock,
page 5.
For stain programmes, additional
functions and option buttons
a Individual settings, page 5.
Press (Start/Reload)
All buttons are sensitive and need
only to be touched lightly. Press and
hold the
(Ready in) option button
for an automatic run through all
setting options.
Programme selector
1 2 3 4 5
6
Insert for liquid detergent (depending on model) apage 6
7
Overview of programmes aRefer to the table of consumption values on page 8, and advice and warnings on page 6.
Programmes °C max.
Type of laundry
Additional functions; Information
ÊCottons
: - 90 °C
7 kg/
4 kg*
hard-wearing fabrics, cottons or linen that can be washed
at 90°C
speedPerfect i*, ecoPerfect j, S(Reduced Ironing),
h(Extra rinse)
oc+ Prewash
IEasy-Care
: - 60 °C
3.5 kg
easy-care cotton, linen, synthetic or blended fabrics
speedPerfect i, ecoPerfect j, S(Reduced Ironing), h(Extra rinse)
o+ Prewash
nMix
: - 40 °C cotton or synthetic fabrics
speedPerfect i, ecoPerfect j, S(Reduced Ironing),
h(Extra rinse);
different types of laundry can be washed together
fcDark Wash : - 40 °C dark cotton and dark synthetic fabrics
speedPerfect i, ecoPerfect j, S(Reduced Ironing), h(Extra rinse);
reduced rinse and final spin cycle
j Mud
: - 60 °C hard-wearing and easy-care fabrics S(Reduced Ironing); optimum stain treatment apage 5
è Grass
\ Sweat
cDelicate/Silk
: - 40 °C
2 kg
for delicate fabrics, e.g., silk, satin, synthetic fibres or
blended fabrics (e.g. curtains)
speedPerfect i, ecoPerfect j, S(Reduced Ironing),
h(Extra rinse):
no spin between rinse cycles
Écÿ Wool
: - 40 °C hand/machine washable wool
particularly delicate wash programme to avoid shrinkage of laundry;
longer programme breaks (fabrics rest in the detergent solution)
6cSuper 15
: - 40 °C synthetic cotton, linen, synthetic fibres or blended fabrics
short programme of approx. 15 minutes,
suitable for lightly soiled laundry
$ Sportswear
: - 40 °C fabrics made from microfibre
speedPerfect i, ecoPerfect j, S(Reduced Ironing), h(Extra rinse)
Additional programmes
m
RInse/cSpin, lEmpty
* reduced load with additional function speedPerfect i.
For programmes without prewash, add detergent to compartment II. For prewash programmes, distribute the detergent between compartments I and II.
9202 / 9000664249
9000664249
WM14Q440BY /...
Siemens Electrogeräte GmbH
CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
Carefully read the instruction manual and the information enclosed, and act accordingly.
Keep the machine's documentation for future reference.
Risk of electric shock! Never pull the cable to disconnect the mains plug!
Never insert/disconnect the mains plug with damp hands.
Danger to life! For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation! Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning! Keep detergents and care products out of the reach of children.
Risk of explosion! Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! The washing machine door may become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine is in operation.
Consumption values depending on model
Programme Load Electricity*** Water***
Programme
duration***
Cottons :](cold) 7 kg 0.27 kWh 66 l 145 min
Cottons 30 °C* 7 kg 0.39 kWh 66 l 145 min
Cottons 40 °C* 7 kg 1.02 kWh 66 l 155 min
Cottons60 °C* 7 kg 1.15 kWh 66 l 165 min
Cottons90 °C 7 kg 2.10 kWh 76 l 155 min
Easy-Care 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
Mix 40 °C 3.5 kg 0.54 kWh 47 l 60 min
Delicate/Silk 30 °C 2 kg 0.19 kWh 34 l 41 min
Wool 30 °C 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme
Additional
function
Load
Annual energy
consumption
Annual water
consumption
Cottons40/60 °C ecoPerfect j** 7/3.5 kg 174 kWh 8140 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
9
Care and cleaning
Before the first wash
Do not put laundry in the machine! Turn on the tap. Put into compartment II:
approx. 2 litres of water
detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)
Turn the programme selector to
IEasy-Care 60 °C and press (Start/Reload). At the end of the programme, turn the
programme selector to Off.
Machine housing, control panel
Remove detergent and cleaning agent residue.
Wipe with a soft, damp cloth.
Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down and remove drawer completely.
2. To remove the insert: press upwards from below with your finger.
3. For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.
4. Clean the detergent dispenser tray and inserts with water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the
manufacturer's instructions. Descaling products can be acquired on the website or from customer services aInstallation
instructions.
Emergency release e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding!
The detergent solution and laundry may be hot. Let it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1.
Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
The washing machine door can then be opened.
Information on the display panel depending on model
r flashes Close the washing machine door properly; laundry may be caught.
§: ³Å,
§: É
Turn on the (cold water) tap fully, supply hose kinked or trapped;
Clean the filter apage 10, water pressure too low.
§: ³µ Detergent solution pump blocked; Clean the detergent solution pump apage 10.
Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon apage 10.
Heavy foam build-up apage 11, status indicator 1 flashes.
§: ´ Water in the base tub, appliance leaking. Call customer services!
©: ³¯ Open the (hot water) tap fully.
Inlet hose kinked/trapped.
Water pressure too low. Clean the filter apage 10.
Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first
wash cycle.
s Childproof lock activated: to deactivate a page 5.
Risk of electric shock! Disconnect the mains plug.
Risk of explosion! Do not use solvents.
9
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Using a screwdriver or the insert for liquid detergent
(depending on model), open and remove the service flap.
2. Remove the folding gutter and place a large enough container underneath.
3. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing.
Remove the sealing cap, allow the detergent solution to flow out into the container. Replace
the sealing cap and place the drainage hose in the retainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the
detergent solution begins to flow out on the folding gutter. When the container is full, close
the pump cover and empty the container. Repeat the above steps until all the detergent
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residual water).
5. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and the folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 2 litres of water into compartment II and then start the l
Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except mRInse/cSpin//lEmpty).
3. Choose (Start/Reload). Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
Risk of burning!
Allow the detergent solution to cool.
Turn off the tap.
11
What to do if...
ʑ
Water is leaking out Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
(Start/Reload) not selected?
Tap not turned on?
Filter blocked? Clean the filter apage 10.
Supply hose kinked or trapped?
ʑ
The appliance door will not
open.
Safety function active. Programme stopped? apage 4.
(without final spin) selected? apage 3, 4.
Can be opened by emergency release only? apage 9.
Door locked after the washing machine is switched off: Switch on the washing
machine and wait for 5 seconds.
ʑ
The selected programme does
not start.
(Start/Reload)or (Ready in) time selected?
Washing machine door closed?
Childproof lock active? Deactivate apage 5.
ʑ
Detergent solution is not
drained.
(without final spin) selected? apage 3, 4.
Clean the detergent solution pump apage 10.
Clean the waste pipe and/or drainage hose.
ʑ
No water can be seen in the
drum.
Not a fault. Water remains inside below the visible area.
ʑ
Spin result not satisfactory.
Laundry wet/too damp.
Not a fault. Spin control system has stopped the spin cycle. Uneven distribution of
laundry.
Distribute large and small items of laundry evenly in the drum.
S(Reduced Ironing) selected? apage 5.
Selected speed too low? apage 5.
ʑ
Programme duration changes
suddenly during operation.
Not a fault. The program time can vary according to the distribution of laundry, with
it therefore being possible for the display panel to show adjustments in the
duration.
ʑ
Spin cycle performed several
times.
Not a fault. The balance control system has detected an imbalance and is
attempting to redress this by repeating the spin.
ʑ
Residual water in the
compartment for care products.
Not a fault: the action of the care product is not affected.
Clean the compartment if necessary apage 9.
ʑ
Odour formation in the washing
machine.
Run programme ÊCottons90 °C without laundry. Use standard detergent.
ʑ
Status display 1 flashing.
Appliance has detected a
detergent overload.
Too much detergent used?
If foam is escaping from the detergent drawer: mix 1 tablespoon of fabric softener
with ½ litre of water and pour into compartment II (not with outdoor or down
fabrics).
Reduce the detergent dosage for the next wash cycle.
ʑ
Intense noise formation,
vibrations and "wandering"
during the spin cycle.
Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions.
Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions.
ʑ
Display panel/indicator lamps
remain turned off while the
machine is working.
Energy-saving mode apage 5.
Power cut?
Fuses triggered? Reset/change the fuse.
If the fault occurs repeatedly, call customer services.
ʑ
Programme sequence longer
than usual.
Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly
distributing the laundry.
Not a fault: foam detection system active; adds an additional rinse cycle.
ʑ
Detergent residues on the
laundry.
Occasionally, phosphate-free detergents contain water-insoluble residues.
Select mRInse/cSpin or brush out the laundry after washing.
If you cannot correct a fault yourself or if a repair is necessary:
Turn the programme selector to Off and remove the mains plug from the socket.
Turn off the water supply and call customer services aInstallation instructions.
Instructions for use
Washing
Machine
Observe the safety
instructions on
page 8!
Read these instructions and the separate installation
instructions before operating the washing machine.
en
1 2
¯
a
m c
m c h
l
a
§ r
ǯ
Correct installation according to the separate
installations actions.
Checking the machine
Never use a damaged machine!
Contact customer service!
Connecting the mains plug
Make sure your hands are dry!
Handle the plug only!
Turning on the tap
Compartment II: detergent for the main wash, water softener,
bleach, stain remover
a
a
Clo
Your washing machine
Congratulations on having opted for a modern, high-quality domestic appliance
manufactured by Siemens. This washing machine is distinguished by its economical
energy consumption.
Each machine that leaves our factory has been inspected thoroughly to ensure that it
functions properly and is in perfect condition.
For further information on our products, accessories, spares and services, consult our
website www.siemens-home.com or contact any of our customer service centres.
You can find the contact details for your nearest after-sales service here or in the after-
sales service directory (depending on model).
GB 0844 8928999
(calls from a BT landline will be charged at up to 3 pence
per minute. A call set-up fee of up to 6 pence may apply)
IE 01450 2655
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with environmental guidelines.
This appliance is certified in accordance with European Directive 2002/96/CE on the
waste electrical and electronic equipment (WEEE).
This directive provides the framework for the EU-wide collection and reuse of used
appliances.
Intended use
Contents Page
ʋ Intended use .......................................................................................1
ʋ Programmes ........................................................................................1
ʋ Setting and adjusting the programme ...........................................3
ʋ Washing ...........................................................................................3/4
ʋ After washing ......................................................................................4
ʋ Individual settings ..........................................................................5/6
ʋ Important information ....................................................................... 6
ʋ Overview of programmes ................................................................7
ʋ Safety instructions .............................................................................8
ʋ Consumption values .........................................................................8
ʋ Care and cleaning .............................................................................9
ʋ Information on the display panel ....................................................9
ʋ Maintenance .................................................................................... 10
ʋ What to do if ... ................................................................................ 11
Protection of the environment/Conservation tips
Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
Wash normally soiled laundry without a pre-wash.
Instead of
Ê
Cottons90 °C, choose the programme
Ê Cottons 60 °C with the additional function ecoPerfect j.
Comparable cleaning result was significantly lower energy
consumption.
Measure the detergent according to the manufacturer's
instructions and water hardness.
If the laundry is then dried in the tumble dryer, select spin speed
according to instructions of dryer manufacturer.
Preparation
a
Programmes
Detailed overview of programmes apage 7.
Temperature and spin speed can be selected individually,
irrespective of the selected programme and programme
progress.
ÊCottons
Hard-wearing fabrics
oc+ Prewash
Hard-wearing fabrics, prewash
IEasy-Care
Synthetic fabrics
oc+ Prewash
Synthetic fabrics, prewash
Mix
Different types of laundry
Delicate/Silk
Delicate washable fabrics
Écÿ Wool
Hand/machine washable wool
mRInse/cSpin
Laundry washed by hand, h(Extra rinse) button acti-
vated; if only using the spin cycle, deactivate the button
Empty Drain rinsing water with c(without final spin)
j Mud
è Grass
Hard-wearing and easy-care fabrics, special stain
programme apage 5
\ Sweat
6cSuper 15
Short programme
$ Sportswear
Fabrics made from microfibre
Dark Wash
Hard-wearing fabrics
l
a
Compartment ~: Fabric softener, bleach
Compartment I: Detergent for prewash
ʋ for domestic use only,
ʋ for washing machine-washable fabrics and
hand-washable wool in detergent solution,
ʋ to be operated with cold or cold and hot (max. 60 ºC)
drinking water, depending on model, and commercially
available detergents and care products which are suit-
able for use in washing machines.
.
Do not leave children unattended near the
washing machine.
The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
Keep pets away from the washing machine.
ʑ
ʑ
ʑ
ʑ
ʑ
a
i
a
j
S
h
ʑ
s
s
s
s
ʑ
§ or
§ r
ǯ § r
§ r
ǯ
ʑ
ʑ
ʑ
z
ʑ
i
Ê
~
a
oc
j
j
~
: - 90 ºC ºC (temp.) Selec :
- 1400* c (rpm) Selec c
spin, la
1 - 24 h  (Ready in) End o
Status displays Progr
1üü2üücü- ¯- Wash
s Childp a
r Open a
Display panel /
option buttons
Additio
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either direction.
s
a
a

Programme selector
1 2
Insert for liquid detergent (depending on model) apage 6
3 4
End of programme when ...
... (Start/Reload)flashes and - ¯- appears on the display panel.
Note: If display panel lighting is switched off, press any button a Energy
saving mode, page 5.
Interrupting the programme
Programmes at high temperatures:
Cool washing: Select mRInse/cSpin.
Press (Start/Reload).
Programmes at lower temperatures:
Select
mRInse/
cSpin (deactivate h(Extra rinse) button) or
l
Empty.
Press (Start/Reload).
Changing the programme if ...
... you have selected the wrong programme by mistake:
Reselect the programme.
Press (Start/Reload). The new programme starts from the
beginning.
Reloading laundry if ... apage 5
... Press (Start/Reload); both the symbols § + r are displayed on
the display panel. If ǯ is lit, the washing machine door cannot be opened.
Press (Start/Reload).
Sorting and loading laundry
Follow the manufacturer's care information!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load aPage 7.
Observe important information! aPage 6
Wash laundry of different sizes in the same wash programme.
Close the door. Take care not to trap items of laundry between the washing machine door and
seal.
Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your water supply company) and
manufacturer's instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Ê
Ê j
Before the first wash,
run a wash cycle with no laundry in the machine aPage 9.
Setting** and adjusting programmes
a
Ê
oc
I
oc
Écÿ
m c
h
c
j
è
a
\
6c
$
Washing
1
2
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: turn the programme selector to lEmpty
or select the spin speed.
Choose (Start/Reload).
Remove any foreign objects. Risk of rusting.
Leave the washing machine door and detergent door open
so that any residual water can evaporate.
Turn the tap off
Not required for Aqua-Stop models aRefer to Installation instructions.
Switching off
Turn the programme selector to Off.
Washing
~
ʋ
ʋ
ʋ
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑ
ʑ
ʑ
ʑ
ʑ
a
i
a
j
S
h
ʑ
s
s
s
s
ʑ
§ or
§ r
ǯ § r
§ r
ǯ
ʑ
ʑ
ʑ
z
ʑ
i
Ê
~
a
oc
j
j
3
Detergent drawer with
compartments I, II, ~
Door
Drum
Control panel
Service door
: Select the temperature (: = cold)
c Select the spin speed (* depending on the model) or c(without final
spin, laundry soaks in the last rinsing water, display panel - - - )
 End of programme after ...
Programme sequence displays:
1üü2üücü ¯ Wash, rinse, spin, programme duration or end (-0-)
s Childproof lock apage 5
r Open the washing machine door, reload laundry apage 4, 5
Additional functions Start /
Reload
**If the s symbol flashes in the
display panel, the childproof lock is
active aDeactivate childproof lock,
page 5.
For stain programmes, additional
functions and option buttons
a Individual settings, page 5.
Press (Start/Reload)
All buttons are sensitive and need
only to be touched lightly. Press and
hold the
(Ready in) option button
for an automatic run through all
setting options.
3 4
a
5
6
¯
a rgy
m c
m c h
l
a
§ r on
ǯ ed.
a
a
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Ê
Ê j
a
a
Ê
oc
I
oc
Écÿ
m c
h
c
j
è
a
\
6c
$
l
a
~
ʋ
ʋ
ʋ
Individual settings
ʑ
Option buttons
You can change the spin speed and the temperature before the selected programme starts and while it is running. The
effects depend on the programme progress.
ʑ
°C (Temperature )
You can change the displayed washing temperature. The maximum selectable temperature depends on the current
programme.
ʑ
(spin speed in rpm/ (without final spin))
You can change the displayed spin speed. The maximum selectable spin speed depends on the model and which
programme is currently selected.
ʑ
(Ready in)
When you select the programme, the relevant programme duration is displayed. You can delay the end of the
programme before it begins. The ready in-time can be set in increments of one hour up to a maximum of 24 hours. Press
the (Ready in) button until the required number of hours is displayed (h = hour). Choose (Start/Reload).
ʑ
Additional functions aOverview of programmes, page 7
speedPerfect i For washing in a shorter time with a washing outcome comparable to that of the standard programme.
Maximum load aOverview of programmes, page 7.
ecoPerfect
j For saving energy with a washing performance comparable to that of the standard programme.
S(Reduced
Ironing)
Special spin sequence with subsequent fluffing. Gentle final spin: residual moisture in the laundry
slightly increased.
h(Extra rinse)
Additional rinse cycle. For areas with very soft water or for further enhancing the spin result.
ʑ
Childproof lock
sin the
display panel
You can lock the washing machine to prevent the functions you have set from being changed
inadvertently.
ON/OFF: after the start/end of the programme, press and hold (Start/Reload) for approx. 5
seconds.
Note: The childlock can remain activated until you wish to start the next programme, even after
switching off the machine.
Then you can deactivate the childlock before starting the programme and activate it again as
necessary once the programme has started.
Note:
The s symbolis lit: Childlock active.
The s symbolflashes: Childlock active and then the programme selector is altered. To prevent
the programme from stopping, move the programme selector back to the original programme,
the s symbol is lit again.
ʑ
Reloading
§ + or
in the display
panel
Press (Start/Reload) if you want to add additional items of laundry after the programme has
started. The machine checks whether reloading is possible.
§ + r are lit: reloading is possible.
ǯ flashes: wait until § + r are lit.
Note: do not open the door until both the § + r symbols are lit.
ǯ: it is not possible to reload.
Note: for safety reasons, the washing machine door remains locked when the water level and/or
temperature is high, or during spinning.
To continue the programme, press the (Start/Reload)button.
ʑ
Stain programmes
Do not let stains dry. Remove any solid residue beforehand. Sort items of laundry as usual and load the washing machine.
The washing machine adjusts the washing temperature, drum movement and soaking times to suit the type of stain. Hot
or cold water, gentle or intensive washing control (thanks to the new drum structure) and a long or short soaking time
ensure that the wash programme has a special sequence for each type of stain.
The result: optimum stain treatment without the use of additional special detergents.
ʑ
Energy saving mode
The display panel lighting goes out after a few minutes, (Start/Reload) flashes. Press any button to switch on the
lighting.
ʑ
(Start/Reload)
To start the programme or to subsequently load additional laundry, and to activate/deactivate the childproof lock.
Individual settings
z
ʑ
Signal
Important information
Protecting the laundry and the machine
When determining the dosage of all washing powders, additives and cleaning agents, you must follow the
manufacturer's instructions..
Empty all pockets
Check for metal items (paper-clips, etc.).
Wash delicates in a laundry bag (tights, curtains, underwired bras).
Fasten zips, do up any buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additional function speedPerfect. i
Pre-treat any stains as necessary.
intense wash Load less laundry. Choose a programme with a prewash.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the
programme selector to Ê
Cottons
30 °C and press (Start/Reload). After approx. 10 minutes, press (Start/
Reload) to pause the programme. Once the required soaking time has elapsed, press (Start/Reload)again to
continue the programme, or select a different programme.
Starch Laundry should not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordance with the
manufacturer's instructions into fabric softener compartment ~ (rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
manufacturer's instructions. Do not use the washing machine for bleaching clothes.
Insert for liquid detergent depending on model
Position the insert for dispensing liquid detergent:
 Remove the detergent drawer completely a page 9
 Slide the insert forwards and click into place.
Do not use the insert (slide upwards): for gel detergents and washing powder,
for programmes with oc+ Prewash and end time option.
Set to o
1 step, the
display panel
lights up
press and
hold
+
1 step, release
set to
o
setting the
volume*
setting the
volume*
1 step
* if necessary, select the
function several times
1. Activating the mode
for setting the signal
volume
2. Setting the volume
for...
direct
Button signals Information signals
j
j
~
: :
c c

1üü2üücü ¯
s a
r a
s
a
a

5
6
a
7
Overview of programmes aRefer to the table of consumption values on page 8, and advice and warnings on page 6.
Programmes °C max.
Type of laundry
Additional functions; Information
ÊCottons
: - 90 °C
7 kg/
4 kg*
hard-wearing fabrics, cottons or linen that can be washed
at 90°C
speedPerfect
i*, ecoPerfect j, S(Reduced Ironing), h(Extra rinse)
oc+ Prewash
IEasy-Care
: - 60 °C
3.5 kg
easy-care cotton, linen, synthetic or blended fabrics
speedPerfect i, ecoPerfect j, S(Reduced Ironing), h(Extra rinse)
o+ Prewash
nMix
: - 40 °C cotton or synthetic fabrics
speedPerfect i, ecoPerfect j, S(Reduced Ironing),
h(Extra rinse);
different types of laundry can be washed together
fcDark Wash : - 40 °C dark cotton and dark synthetic fabrics
speedPerfect i, ecoPerfect j, S(Reduced Ironing), h(Extra rinse);
reduced rinse and final spin cycle
j Mud
: - 60 °C hard-wearing and easy-care fabrics S(Reduced Ironing); optimum stain treatment apage 5
è Grass
\ Sweat
cDelicate/Silk
: - 40 °C
2 kg
for delicate fabrics, e.g., silk, satin, synthetic fibres or
blended fabrics (e.g. curtains)
speedPerfect i, ecoPerfect j, S(Reduced Ironing), h(Extra rinse):
no spin between rinse cycles
Écÿ Wool
: - 40 °C hand/machine washable wool
particularly delicate wash programme to avoid shrinkage of laundry;
longer programme breaks (fabrics rest in the detergent solution)
6cSuper 15
: - 40 °C synthetic cotton, linen, synthetic fibres or blended fabrics
short programme of approx. 15 minutes,
suitable for lightly soiled laundry
$ Sportswear
: - 40 °C fabrics made from microfibre
speedPerfect i, ecoPerfect j, S(Reduced Ironing), h(Extra rinse)
Additional programmes
mRInse/cSpin, lEmpty
* reduced load with additional function speedPerfect i.
For programmes without prewash, add detergent to compartment II. For prewash programmes, distribute the detergent between compartments I and II.
9202 / 9000664249
9000664249
WM14Q440BY /...
Siemens Electrogeräte GmbH
CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
Carefully read the instruction manual and the information enclosed, and act accordingly.
Keep the machine's documentation for future reference.
Risk of electric shock! Never pull the cable to disconnect the mains plug!
Never insert/disconnect the mains plug with damp hands.
Danger to life! For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation! Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning! Keep detergents and care products out of the reach of children.
Risk of explosion! Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover/cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! The washing machine door may become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine is in operation.
Consumption values depending on model
Programme Load Electricity*** Water***
Programme
duration***
Cottons :](cold) 7 kg 0.27 kWh 66 l 145 min
Cottons 30 °C* 7 kg 0.39 kWh 66 l 145 min
Cottons 40 °C* 7 kg 1.02 kWh 66 l 155 min
Cottons60 °C* 7 kg 1.15 kWh 66 l 165 min
Cottons90 °C 7 kg 2.10 kWh 76 l 155 min
Easy-Care 40 °C* 3.5 kg 0.64 kWh 55 l 103 min
Mix 40 °C 3.5 kg 0.54 kWh 47 l 60 min
Delicate/Silk 30 °C 2 kg 0.19 kWh 34 l 41 min
Wool 30 °C 2 kg 0.17 kWh 39 l 40 min
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme
Additional
function
Load
Annual energy
consumption
Annual water
consumption
Cottons40/60 °C ecoPerfect j** 7/3.5 kg 174 kWh 8140 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
I
a
a
r
§ ³Å
§ É
a
§ ³µ a
a
a 1
§
´
© ³¯
a
s a
l
m c l
ʑ
ʑ
a
ʑ
a
a
a
ʑ
a
ʑ
a
a
ʑ
ʑ
S a
a
ʑ
ʑ
ʑ
a
ʑ
Ê
ʑ
1
ʑ
a
a
ʑ
a
ʑ
ʑ
m c
a
9
Care and cleaning
Before the first wash
Do not put laundry in the machine! Turn on the tap. Put into compartment II:
approx. 2 litres of water
detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)
Turn the programme selector to
I
Easy-Care 60 °C and press (Start/Reload). At the end of the programme, turn the
programme selector to Off.
Machine housing, control panel
Remove detergent and cleaning agent residue.
Wipe with a soft, damp cloth.
Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down and remove drawer completely.
2. To remove the insert: press upwards from below with your finger.
3. For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.
4. Clean the detergent dispenser tray and inserts with water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the
manufacturer's instructions. Descaling products can be acquired on the website or from customer services aInstallation
instructions.
Emergency release e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding!
The detergent solution and laundry may be hot. Let it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
The washing machine door can then be opened.
Information on the display panel depending on model
r flashes Close the washing machine door properly; laundry may be caught.
§: ³Å,
§: É
Turn on the (cold water) tap fully, supply hose kinked or trapped;
Clean the filter apage 10, water pressure too low.
§: ³µ Detergent solution pump blocked; Clean the detergent solution pump apage 10.
Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon apage 10.
Heavy foam build-up apage 11, status indicator 1 flashes.
§: ´ Water in the base tub, appliance leaking. Call customer services!
©: ³¯ Open the (hot water) tap fully.
Inlet hose kinked/trapped.
Water pressure too low. Clean the filter apage 10.
Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first
wash cycle.
s Childproof lock activated: to deactivate a page 5.
Risk of electric shock! Disconnect the mains plug.
Risk of explosion! Do not use solvents.
9
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Using a screwdriver or the insert for liquid detergent
(depending on model), open and remove the service flap.
2. Remove the folding gutter and place a large enough container underneath.
3. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing.
Remove the sealing cap, allow the detergent solution to flow out into the container. Replace
the sealing cap and place the drainage hose in the retainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the
detergent solution begins to flow out on the folding gutter. When the container is full, close
the pump cover and empty the container. Repeat the above steps until all the detergent
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residual water).
5. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and the folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 2 litres of water into compartment II and then start the lEmpty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except mRInse/cSpin//lEmpty).
3. Choose (Start/Reload). Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
Risk of burning!
Allow the detergent solution to cool.
Turn off the tap.
ʑ
ʑ
a
ʑ
a
a
a
ʑ
a
ʑ
a
a
ʑ
ʑ
S a
a
ʑ
ʑ
ʑ
a
ʑ
Ê
ʑ
1
ʑ
a
a
ʑ
a
ʑ
ʑ
m c
a
a
Ê
:
i j S
h
oc
I
:
i j S h
o
n
:
i j S
h
fc :
i j S h
j
: S a
è
\
c
:
i j S h
Écÿ
:
6c
:
$
:
i j S h
m c l
i
ä
:]
j
I
a
a
r
§ ³Å
§ É
a
§ ³µ a
a
a 1
§
´
© ³¯
a
s a
l
m c l
11
What to do if...
ʑ
Water is leaking out Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
(Start/Reload) not selected?
Tap not turned on?
Filter blocked? Clean the filter apage 10.
Supply hose kinked or trapped?
ʑ
The appliance door will not
open.
Safety function active. Programme stopped? apage 4.
(without final spin) selected? apage 3, 4.
Can be opened by emergency release only? apage 9.
Door locked after the washing machine is switched off: Switch on the washing
machine and wait for 5 seconds.
ʑ
The selected programme does
not start.
(Start/Reload)or (Ready in) time selected?
Washing machine door closed?
Childproof lock active? Deactivate apage 5.
ʑ
Detergent solution is not
drained.
(without final spin) selected? apage 3, 4.
Clean the detergent solution pump apage 10.
Clean the waste pipe and/or drainage hose.
ʑ
No water can be seen in the
drum.
Not a fault. Water remains inside below the visible area.
ʑ
Spin result not satisfactory.
Laundry wet/too damp.
Not a fault. Spin control system has stopped the spin cycle. Uneven distribution of
laundry.
Distribute large and small items of laundry evenly in the drum.
S(Reduced Ironing) selected? apage 5.
Selected speed too low? apage 5.
ʑ
Programme duration changes
suddenly during operation.
Not a fault. The program time can vary according to the distribution of laundry, with
it therefore being possible for the display panel to show adjustments in the
duration.
ʑ
Spin cycle performed several
times.
Not a fault. The balance control system has detected an imbalance and is
attempting to redress this by repeating the spin.
ʑ
Residual water in the
compartment for care products.
Not a fault: the action of the care product is not affected.
Clean the compartment if necessary apage 9.
ʑ
Odour formation in the washing
machine.
Run programme ÊCottons90 °C without laundry. Use standard detergent.
ʑ
Status display 1 flashing.
Appliance has detected a
detergent overload.
Too much detergent used?
If foam is escaping from the detergent drawer: mix 1 tablespoon of fabric softener
with ½ litre of water and pour into compartment II (not with outdoor or down
fabrics).
Reduce the detergent dosage for the next wash cycle.
ʑ
Intense noise formation,
vibrations and "wandering"
during the spin cycle.
Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions.
Transportation safety devices removed?
Remove transportation safety devices aInstallation instructions.
ʑ
Display panel/indicator lamps
remain turned off while the
machine is working.
Energy-saving mode apage 5.
Power cut?
Fuses triggered? Reset/change the fuse.
If the fault occurs repeatedly, call customer services.
ʑ
Programme sequence longer
than usual.
Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly
distributing the laundry.
Not a fault: foam detection system active; adds an additional rinse cycle.
ʑ
Detergent residues on the
laundry.
Occasionally, phosphate-free detergents contain water-insoluble residues.
Select mRInse/cSpin or brush out the laundry after washing.
If you cannot correct a fault yourself or if a repair is necessary:
Turn the programme selector to Off and remove the mains plug from the socket.
Turn off the water supply and call customer services aInstallation instructions.
Instructions for use
Washing
Machine
Observe the safety
instructions on
page 8!
Read these instructions and the separate installation
instructions before operating the washing machine.
en
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Siemens WM14Q440BY Manuale utente

Categoria
Lavatrici
Tipo
Manuale utente

in altre lingue