Yamaha V7 Guida utente

Categoria
Controller DJ
Tipo
Guida utente
Welcome:
Thank you for downloading the “CL StageMix” iPad app for the Yamaha CL series
digital mixing consoles.
The latest firmware version for CL series can be downloaded from
https://www.yamaha.com/proaudio/
StageMix is an application for the Apple iPad that provides remote control of Yamaha
CL series digital mixing console functions via a simple, intuitive graphical interface
from anywhere within wireless range. The software has been specifically designed to
allow engineers to adjust monitor mixes from the performers’ positions on stage,
directly controlling mix parameters via the iPad rather than having to rely on verbal
directions to a second engineer. The result is better mixes in less time; a huge
advantage during high-pressure pre-show setup. Although StageMix is focused on
the requirements for adjusting monitor mixes on stage, its range of features is
continually expanding, allowing it to be used for a wider variety of remote control
functions.
Note: iOS applications may not be supported in your area. Please check with your
Yamaha dealer.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 2
CONTENTS
Page
1.0
System Requirements ..................................................................................... 7
2.0 Wi-Fi Settings ................................................................................................... 7
3.0 Getting Started ................................................................................................. 8
3.1 CL series Network Setup .............................................................................. 8
3.2 iPad Wi-Fi Settings ....................................................................................... 8
3.2.1 Using DHCP ............................................................................................. 8
3.2.2 Using a Static IP Address ......................................................................... 9
3.2.3 Network switching (V7.0 and later) ......................................................... 10
3.3 StageMix Setup .......................................................................................... 11
3.3.1 OFFLINE DEMO ...................................................................................... 11
3.3.2 Configure StageMix to Work with a CL series Console ............................ 11
3.3.3 Select a Mixer ......................................................................................... 13
3.3.4 Connect and Synchronize with the CL Console ...................................... 13
3.3.5 Edit Mixer Configurations ........................................................................ 13
4.0 Mixer Window ................................................................................................. 14
4.1 Channel Bank Navigation ........................................................................... 14
4.2 Layer Navigation ........................................................................................ 14
4.2.1 Custom Fader Layer ................................................................................. 15
4.2.2 Custom Fader Bank Naming .................................................................... 16
4.2.3 Storing of Custom Meter Bridge Layout and Names ................................ 17
4.3 Channel Names and Colors ....................................................................... 17
4.4 Faders ........................................................................................................ 17
4.4.1 Long Faders ........................................................................................... 18
4.4.2 Navigation in Long Faders Mode ............................................................ 18
4.5 Channel ON ............................................................................................... 18
4.6 CUE ............................................................................................................ 18
4.7 Dual Cue Mode .......................................................................................... 19
4.7.1 Channel Mode ........................................................................................ 19
4.7.2 Cue Clear ............................................................................................... 19
4.7.3 Remote Mode ......................................................................................... 19
4.8 SOLO Mode ............................................................................................... 19
4.9 Master Bank ............................................................................................... 21
4.10 GAIN .......................................................................................................... 22
4.10.1 Digital Gain ............................................................................................. 22
4.10.2 Gain Compensation Mode ...................................................................... 23
4.10.3 Analog Gain / Digital Gain Link ............................................................... 23
4.10.4 ALL GC ON ............................................................................................. 23
4.10.5 ALL GC OFF ........................................................................................... 23
4.10.6 Input Port ................................................................................................ 23
4.10.7 Phantom Power ...................................................................................... 24
4.10.8 Phase ..................................................................................................... 24
4.10.9 Dante Wireless Microphone Control and Monitoring .............................. 24
4.10.10 Non-Dante Wireless Microphone Control and Monitoring ..................... 25
4.10.11 Input Port Patching ............................................................................... 26
4.10.12 Input Port Patch Options ...................................................................... 28
4.10.13 Multi-Channel Input Patching................................................................ 28
4.11 SENDS ON FADERS ................................................................................. 30
4.11.1 Mix Send Levels ..................................................................................... 31
Yamaha Professional Audio CL StageMix V7 User Guide
Page 3
4.11.2
Mix Sends ON......................................................................................... 32
4.11.3 Mix Send PRE/POST .............................................................................. 32
4.11.4 Global PRE/POST .................................................................................. 32
4.11.5 Stereo Mix Pan ....................................................................................... 32
4.11.6 Selected MIX/MT Overview in Sends on Faders .................................... 32
4.12 DCA FADERS ............................................................................................ 34
5.0 EQ / PAN / 5.1 / DYNAMICS ........................................................................... 35
5.1 EQ .............................................................................................................. 35
5.1.1 EQ Curve in Mixer Window ..................................................................... 35
5.1.2 Selecting PEQ or GEQ ........................................................................... 36
5.1.3 Accessing the EQ Editing Screens ......................................................... 36
5.2 PARAMETRIC EQ EDITING ...................................................................... 37
5.2.1 Gain and Frequency Lock ....................................................................... 38
5.2.2 HPF ........................................................................................................ 38
5.2.3 EQ Bands 1 & 4 ...................................................................................... 39
5.2.4 EQ ON .................................................................................................... 39
5.2.5 EQ RESET ............................................................................................. 39
5.2.6 EQ TYPE ................................................................................................ 40
5.2.7 PEQ COPY/PASTE ................................................................................ 40
5.2.8 RTA ON ................................................................................................... 40
5.2.9 RTA HOLD .............................................................................................. 41
5.2.10 BAND BYPASS ....................................................................................... 41
5.3 GRAPHIC EQ EDITING ............................................................................. 42
5.3.1 Navigation in the GEQ Overview Section ............................................... 42
5.3.2 Rack Position .......................................................................................... 42
5.3.3 GEQ Type ............................................................................................... 43
5.3.4 Insert Position ......................................................................................... 43
5.3.5 RTA ON ................................................................................................... 43
5.3.6 RTA HOLD .............................................................................................. 43
5.3.7 GEQ FLAT .............................................................................................. 43
5.3.8 GEQ Copy/Paste .................................................................................... 43
5.3.9 GEQ ON ................................................................................................. 43
5.3.10 Editing GEQ Bands ................................................................................. 44
5.3.11 Navigation in the GEQ Editing Section ................................................... 44
5.4 8-BAND PEQ EDITING .............................................................................. 45
5.4.1 EQ TYPE ................................................................................................ 45
5.4.2 HPF ........................................................................................................ 46
5.4.3 LPF ......................................................................................................... 46
5.4.4 EQ RESET ............................................................................................. 46
5.4.5 PEQ COPY/PASTE ................................................................................ 46
5.4.6 EQ ON .................................................................................................... 46
5.4.7 Insert Position ......................................................................................... 46
5.4.8 RTA ON ................................................................................................... 47
5.4.9 RTA HOLD .............................................................................................. 47
5.4.10 Gain and Frequency Lock ....................................................................... 47
5.4.11 BAND BYPASS ....................................................................................... 47
5.4.12 NOTCH FILTERS ................................................................................... 47
5.5 PAN TO STEREO BUSSES ....................................................................... 48
5.5.1 Balance ................................................................................................... 48
5.6 SURROUND PAN ...................................................................................... 49
Yamaha Professional Audio CL StageMix V7 User Guide
Page 4
5.6.1
Surround Pan Editing Mono Input Channels ........................................ 49
5.6.2 Surround Pan Editing Stereo Input Channels ...................................... 49
5.6.3 L/R and F/R Lock .................................................................................... 50
5.6.4 Divergence and LFE Level ....................................................................... 50
5.7 DYNAMICS PROCESSORS ...................................................................... 51
5.8 DYNAMICS PROCESSOR EDITING ......................................................... 52
5.8.1 Default .................................................................................................... 52
5.8.2 Copy/Paste ............................................................................................. 52
5.8.3 Dynamics On .......................................................................................... 53
5.8.4 Dynamics Type ....................................................................................... 53
5.8.5 Threshold ................................................................................................ 53
5.8.6 Range and Ratio ..................................................................................... 53
5.8.7 Other Dynamics Parameters .................................................................. 53
5.8.8 Key In ..................................................................................................... 54
6.0 OUTPORTS ..................................................................................................... 55
6.1 Navigation .................................................................................................. 55
6.2 Output Port Identification ............................................................................ 55
6.3 Delay On .................................................................................................... 56
6.4 Delay Time Display .................................................................................... 56
6.5 Output Port Phase ...................................................................................... 56
6.6 Output Port Gain ........................................................................................ 56
6.7 Delay Time Editor ....................................................................................... 57
6.7.1 Delay Scale ............................................................................................ 57
6.7.2 Numeric Keypad ..................................................................................... 57
6.7.3 Nudge Delay Time Values....................................................................... 58
6.7.4 Copy Delay Time Value .......................................................................... 58
6.7.5 Paste Delay Time Value .......................................................................... 58
6.7.6 Close the Delay Time Editor ................................................................... 58
6.7.7 Output Port Patching ................................................................................ 58
7.0 UTILITY ........................................................................................................... 61
7.1 MUTE GROUP MASTERS ......................................................................... 61
7.1.1 Mute Group Dim Level ............................................................................ 62
7.2 TAP TEMPO .............................................................................................. 63
7.2.1 Multi-Select ............................................................................................. 63
7.3 OSCILLATOR ............................................................................................ 64
7.3.1 Oscillator Assign ..................................................................................... 64
7.3.2 Oscillator Output ..................................................................................... 64
7.3.3 Oscillator Level Control ........................................................................... 64
7.3.4 Oscillator Frequency ............................................................................... 65
7.3.5 Oscillator Mode ....................................................................................... 65
7.4 RECORDER ............................................................................................... 65
7.4.1 Title List .................................................................................................. 66
7.4.2 Transport ................................................................................................ 66
7.4.3 Timeline Location .................................................................................... 66
7.4.4 Play Mode ............................................................................................... 66
7.4.5 Recorder Input ........................................................................................ 66
7.4.6 Playback Output ..................................................................................... 66
8.0 RACK ............................................................................................................... 67
8.1 GEQ Racks ................................................................................................ 67
8.1.1 Rack Slot Assignments ........................................................................... 67
Yamaha Professional Audio CL StageMix V7 User Guide
Page 5
8.1.2
Input Patch Assignments ........................................................................ 68
8.1.3 Accessing GEQ and 8-Band PEQ Editors .............................................. 68
8.1.4 GEQ Editing ............................................................................................ 68
8.1.5 8-Band PEQ Editing ................................................................................ 68
8.1.6 GEQ and 8-Band PEQ ON ..................................................................... 68
8.1.7 Input and Output Meters ......................................................................... 68
8.1.8 Output Patch Assignments ..................................................................... 68
8.2 EFFECT Rack ............................................................................................ 68
8.2.1 Rack Slot Assignments ........................................................................... 68
8.2.2 Input Patch Assignments ........................................................................ 69
8.2.3 Accessing Effect, GEQ and 8-Band PEQ Editors ................................... 69
8.2.4 Effect Bypass .......................................................................................... 69
8.2.5 Input and Output Meters ......................................................................... 69
8.2.6 Output Patch Assignments ..................................................................... 69
8.3 EFFECT EDITING ...................................................................................... 70
8.3.1 Current Effect .......................................................................................... 70
8.3.2 Effect Type Selection .............................................................................. 70
8.3.3 Effect Library ........................................................................................... 70
8.3.4 Input and Output Patch Assignments ...................................................... 71
8.3.5 Input and Output Meters ......................................................................... 71
8.3.6 Effect Bypass .......................................................................................... 71
8.3.7 Effect Cue ............................................................................................... 71
8.3.8 Close Effect Editor .................................................................................. 71
8.3.9 Parameter Editing using Sliders.............................................................. 71
8.3.10 Numerical Parameter Editing .................................................................. 71
8.3.11 Multi-Segment Buttons ........................................................................... 72
8.3.12 Accessing Parameters ............................................................................ 72
8.3.13 Additional Parameters ............................................................................ 72
8.3.14 Wet/Dry Mix ............................................................................................ 72
8.4 GRAPHICAL EFFECT EDITING ................................................................ 73
8.4.1 REV-X Time/Level Parameters ............................................................... 74
8.4.2 REV-X Space Parameters ...................................................................... 75
8.4.3 REV-X Filter Parameters ........................................................................ 76
8.4.4 REVERB Time/Level Parameters ........................................................... 77
8.4.5 REVERB Space Parameters .................................................................. 78
8.4.6 REVERB Filter Parameters .................................................................... 79
8.4.7 REVERB Dynamics Parameters ............................................................. 79
8.4.8 STEREO REVERB Program................................................................... 79
8.4.9 MONO/STEREO/MOD DELAY Parameters ............................................ 80
8.4.10 DELAY LCR Parameters ......................................................................... 81
8.4.11 ECHO Parameters .................................................................................. 81
9.0 SCENE MEMORY............................................................................................ 82
9.1 CURRENT SCENE .................................................................................... 82
9.2 DECREMENT / INCREMENT SCENE ....................................................... 82
9.3 SCENE LIST .............................................................................................. 83
9.4 SCENE RANGE ......................................................................................... 83
9.5 SELECTED SCENE ................................................................................... 83
9.6 STORE SCENE.......................................................................................... 84
9.7 UNDO STORE ........................................................................................... 84
9.8 RECALL SCENE ........................................................................................ 84
Yamaha Professional Audio CL StageMix V7 User Guide
Page 6
9.9
UNDO RECALL .......................................................................................... 85
10.0 SETUP ............................................................................................................. 86
10.1 Fader Delay ................................................................................................ 86
10.2 Filled EQ Graph.......................................................................................... 86
10.3 Enable Inc/Dec Scene Recall ..................................................................... 86
10.4 Show Send Levels in Meter Bridge ............................................................ 87
10.5 Enable Phantom Power Switching ............................................................. 87
10.6 Set EQ band to 0dB with Double-Tap ........................................................ 87
10.7 Show dB Markings on Mixer ....................................................................... 87
10.8 Set DCA to 0dB with Double-Tap ............................................................... 87
10.9 Disable Screen Auto-Lock ........................................................................... 87
10.10 Cue Operation Mode .................................................................................. 87
10.11 Cue A Mode ............................................................................................... 87
10.12 Cue B Mode ............................................................................................... 87
10.13 Solo in Place Mode .................................................................................... 87
10.14 Channel Select StageMix Follows Console ............................................. 88
10.15 Channel Select Console Follows StageMix ............................................. 88
10.16 Input Meter Point ........................................................................................ 88
10.17 Output Meter Point ..................................................................................... 88
10.18 Display Key Input for Dynamics Meters ...................................................... 88
10.19 RTA Peak Hold Mode ................................................................................. 88
10.20 RTA Input Gain........................................................................................... 89
10.21 RTA Number of Bands ............................................................................... 89
11.0 Troubleshooting ............................................................................................. 90
11.1 No Wi-Fi Available ...................................................................................... 90
11.2 Connection Error ........................................................................................ 90
11.3 Connection Lost ......................................................................................... 91
11.4 DHCP Server Setup on WAP/Router ......................................................... 91
11.5 Using StageMix with CL Editor ................................................................... 91
11.6 “Redirect to Internet” Problem with iOS 6 or higher .................................... 92
11.7 Graphic EQ Doesn’t Affect the Sound ........................................................ 92
11.8 Problems Moving Multiple Faders .............................................................. 92
11.9 StageMix Facebook Page .......................................................................... 92
Yamaha Professional Audio CL StageMix V7 User Guide
Page 7
1.0 System Requirements
Apple iPad (any model using iOS 8 or higher)
Yamaha CL series digital mixing console with V4.0, V4.1, V4.5 or V5.0
firmware
Wi-Fi access point (802.11g, n or ac)
CAT5 cable (to connect the console to a Wi-Fi access point)
iOS: iOS 8.0 -11.x
2.0 Wi-Fi Settings
Configure the Wi-Fi access point, following the manufacturer’s instructions. No
special settings are needed, but using security such as WPA is highly recommended,
to prevent unwanted devices from joining the network. Here are some suggested
settings to assist less experienced Wi-Fi users:
1. Give the wireless network a name (this is the “SSID”).
2. Choose a security mode (such as WPA) and password.
3. Select the wireless mode (802.11g, n or ac).
4. In the case of “n”, select the wireless band (2.4 or 5GHz).
5. If available, enable “Auto Channel Selection” so the wireless channel with the
least interference will be selected.
Using a Wi-Fi access point with 2 or more external aerials is recommended to
increase potential signal range. Booster aerials could be connected for a further
increase in performance.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 8
3.0 Getting Started
3.1 CL series Network Setup
Connect the Wi-Fi access point to the CL series console’s network port via a
CAT5 cable.
Make sure your Ethernet cable is connected to a LAN port on your Wi-Fi
device and not the WAN port.
Note the IP address of the CL series console - this will need to be entered into
the iPad later. It can be found in the console as follows:
a. Press the [SETUP] button on the CL series touchscreen
b. Press [NETWORK] on the CL series touchscreen
3.2 iPad Wi-Fi Settings
The iPad can be configured using either DHCP or a Static IP address.
3.2.1 Using DHCP
Dynamic Host Configuration Protocol (DHCP) is a network protocol that
enables a server to automatically assign an IP address to a device. It is
recommended to use DHCP. Use the following steps to configure your
iPad using DHCP.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 9
a) Open the iPad “Settings” menu
b) Select “Wi-Fi”, and choose the correct Wi-Fi Access Point under
“CHOOSE A NETWORK…”
c) Tap on the network’s name to edit the IP address.
d) Select [DHCP] and ensure that your iPad receives data for the IP
Address, Subnet Mask, Router and DNS.
e) Select [Renew Lease] if this data is not applied.
f) If the settings are successfully applied, press the iPad’s Home
button to exit the Settings menu.
Note:
Make sure that the subnet of the IP address is the same as that of
the CL series console.
If DHCP settings are not applied after step (e), please check your
DHCP server settings (refer to 11.4
for further advice). Alternatively,
setup your iPad using a Static IP Address.
3.2.2 Using a Static IP Address
a) Open the iPad “Settings” menu
b) Select “Wi-Fi”, and choose the correct Wi-Fi Access Point under
“CHOOSE A NETWORK…”
c) Tap on the network’s name to edit the IP address.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 10
d) Select [Static]
e) IP Address: enter an IP Address similar to the one for the CL series
console, but with just the last number different. (For example, if CL
series console is 192.168.0.128, give an address to the iPad such
as 192.168.0.124).
f) Subnet Mask: enter 255.255.255.0”.
g) Router: enter the IP Address of your Wi-Fi Access Point (printed on
the bottom of the device or in the user’s manual)
h) DNS: enter the IP Address of your Wi-Fi Access Point (as in step g)
i) Press the iPad’s Home button to exit the Settings menu.
3.2.3 Network switching (V7.0 and later)
If using iOS 9.3 and later with CL StageMix V7.0 and later, you can
connect to a network using a wired connection in addition to a wireless
connection. A Lightning to USB 3 Camera Adapter and USB Ethernet
Adapter are required to use a wired connection.
You can switch between a wireless and wired connection when offline;
you cannot switch while online.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 11
3.3 StageMix Setup
Launch the “CL StageMix” App
The “Select Mixer” screen will appear. From this screen, you can do any of
the following things:
Access the OFFLINE DEMO mode to explore the features and user
interface of CL StageMix.
Configure StageMix to work with a CL console.
Select a CL console that has already been configured to work with your
iPad and begin using StageMix.
3.3.1 OFFLINE DEMO
If [OFFLINE DEMO] is pressed in the “Select Mixer” screen, the
functions of StageMix will operate independently of any mixing console.
It is a useful way to demonstrate and learn how to use the app without
the need for a mixer. Level meters and most Scene Memory functions
do not work in this mode.
3.3.2 Configure StageMix to Work with a CL series Console
i. Press [ADD MIXER] to open the following screen:
Yamaha Professional Audio CL StageMix V7 User Guide
Page 12
ii. Tap on the blank Name field and enter a name for your CL series
console using the iPad’s onscreen keyboard.
iii. Enter the CL series console’s IP address noted in 3.1. The default IP
Address may not need to be changed but confirm this in the Network
Setup screen of the CL series console (refer to
3.1). If you need to
modify the IP Address in StageMix, make sure you include the dots
between the sets of numbers (as shown above). If the entered console
IP address is in a compatible range with the iPad’s current IP address
(displayed beneath), a green tick will be displayed to the right of the
console IP address. If the entered IP address is in-compatible range
with the current IP address of the iPad, a red cross is displayed
please enter a console IP address in a compatible range.
Please note, having a green tick displayed does not mean that the
entered console IP address for the console is accurate or that the
console has been automatically detected. Please check the console for
the currently assigned IP address to ensure that the correct address is
being entered into StageMix.
iv. Select the Model of CL series console.
v. Press the [ADD MIXER] button at the bottom of the screen.
vi. For reference, the currently assigned IP address of the iPad is
displayed beneath the console model buttons.
Note: From StageMix V6 onwards, it is no longer necessary to enter the
console MAC Address.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 13
3.3.3 Select a Mixer
If your iPad has been configured to work with a CL series console,
select the mixer from the list. (The model of mixer (CL1, CL3 or CL5)
will appear in smaller text below the mixer’s name.)
3.3.4 Connect and Synchronize with the CL Console
Click the [CONNECT] button to connect to the console and begin the
synchronization process.
The message “Syncing With CL…” will appear while StageMix is
obtaining parameters from the console. After this process is complete,
the Mixer window will appear and StageMix is ready to be used.
Up to 5 iPads running StageMix can be connected to the console
simultaneously.
If StageMix cannot connect with your console, refer to the
Troubleshooting section (11.0) at the end of this document for possible
solutions.
3.3.5 Edit Mixer Configurations
The parameters of a saved Mixer Configuration can be viewed and
edited by tapping the right arrow button next to a mixer’s name. This
will open the Edit Mixer screen which allows the Name and IP Address
to be verified and edited using the procedures described in section
3.3.2. After editing, press [SAVE MIXER] to save any changes.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 14
4.0 Mixer Window
The main page of the StageMix is called the “Mixer” window. It shows the EQ
curves, Pan positions, Dynamics status, [CUE] and [ON] buttons, faders, level
meters, and channel names and colors for eight adjacent channels.
Across the top of the screen, level meters and faders are displayed in blocks
of channels for mono Input Channels 1-32, Stereo Input Channels 1-8, Mix
and Matrix busses, and the Master Stereo and Mono busses. This is the
“Navigation/Meter Bridge”.
From StageMix Version 7, there is a new option in the Navigation/Meter
Bridge to access the “Custom Fader Layer” view. Refer to section 4.2.1 for
details.
4.1 Channel Bank Navigation
Press any of the “Navigation/Meter Bridge” blocks to select the bank of
channels to be viewed and controlled in the channel strips below.
4.2 Layer Navigation
Press the [CH 1-32] or [CH 33-72] button to make those banks of channels
available in the “Navigation/Meter Bridge”. Stereo Inputs 1-8 are available as
part of the [CH 1-32] bank.
The Layer Navigation button displays black text on a white background to
indicate the active Layer.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 15
4.2.1 Custom Fader Layer
Press the [CUSTOM] button in the meter bridge to access the Custom
Meter Bridge layout.
To assign a fader bank to a meter bridge block, touch and hold on a
fader/meter block. An assignment pop-up menu will be displayed which
contains a list of all available fader banks for the connected console
model, including all standard fader banks, DCA banks and Custom
Fader Banks. Touch the desired fader bank to assign it to the chosen
fader block. Repeat this operation to assign multiple fader banks to the
available meter bridge blocks.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 16
Left/Right navigation buttons can be used to navigate to other meter
blocks without leaving the assignment pop-up. To exit the assignment
pop-up, touch anywhere outside of the pop-up or touch the close button
in the top right corner.
On the far-right side, is the master block. This block can be assigned as
either the standard master bank (as found in the standard meter bridge
in StageMix), or as the custom master bank as set on the console.
Please note, it is not possible to edit Custom Fader Bank channel
assignments from StageMix. Please use the Console or CL Editor for
this function.
4.2.2 Custom Fader Bank Naming
Once a fader bank has been assign to a meter bridge block, a name
can be given to the bank.
Double tap on the desired fader bank in the meter bridge to open the
keyboard. Once a name has been applied, press [return] to close the
keyboard.
Alternatively, use the left/right arrow keys to move to other banks along
the meter bridge, to name those banks without having to close the
keyboard and re-select the next block.
The bank name is now displayed under the applicable fader block in the
meter bridge.
The name is linked to the chosen fader bank, not the block position in
the meter bridge. If a named fader bank is changed to a different meter
bridge block location, the name of that bank will automatically follow.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 17
Please note, in order to name a fader bank it is first necessary to assign
it to the meter bridge.
4.2.3 Storing of Custom Meter Bridge Layout and Names
The assigned custom meter bridge fader bank layout and naming’s, are
stored as part of the currently in-use Mixer Preset as created in the
front page of StageMix.
If a Mixer Preset is deleted or the console model is edited, the
associated layout and naming’s will also be deleted.
4.3 Channel Names and Colors
The name and color of each channel appears in StageMix as it does in the CL
series console. The names are dimmed if the channel is switched off.
Double-tap on the channel name in the Mixer window to edit the name and
color. Type in a name and press [return]. Alternatively, navigate to another
channel using the left/right cursor buttons above the keyboard. This allows
multiple channels to be named before closing the keyboard.
4.4 Faders
Each fader has its channel number displayed on its cap. The fader cap must
be touched to allow the level to be adjusted. When a fader cap is touched, its
background will lighten and its current dB value will be displayed. Using the
iPad’s multi-touch facility, up to eight faders can be moved simultaneously.
Note: “Multitasking Gestures” must be turned Off in the iPad in order to allow
four or more faders to be adjusted simultaneously (refer to 11.8
for details).
Yamaha Professional Audio CL StageMix V7 User Guide
Page 18
4.4.1 Long Faders
Press the [LONG FADERS] button at the bottom-left corner of the Mixer
window to allow more accurate adjustment of fader levels. In this view,
EQ, Pan, Dynamics and the “Navigation/Meter Bridge” are not visible.
4.4.2 Navigation in Long Faders Mode
Although the “Navigation/Meter Bridge” is not visible in Long Faders
mode, it is possible to navigate up or down in banks of 8 channels
using the left/right arrow buttons in the upper left area of the Mixer
window.
Press the [LONG FADERS] button in the bottom-left corner again to return to
the Mixer Overview.
4.5 Channel ON
Press [ON] to change the on/off status of the channel. The button is green
when the channel is on. When a channel is off, its name and level meter will
dim and its fader position shown in the “Navigation/Meter Bridge” will also dim.
If a channel is muted as part of a Mute Group, the ON button will blink.
4.6 CUE
The [CUE] buttons for each channel control the mixer’s Cue functions. Their
operation mode corresponds to the status of the Cue Mode in the Setup
screen (refer to 10.10).
Yamaha Professional Audio CL StageMix V7 User Guide
Page 19
When [LAST CUE] mode is active, only one channel can be cued at a time.
When [MIX CUE] mode is selected, multiple channels can be cued
simultaneously.
The [CUE CLEAR] button will cancel any cues that have been activated. This
is useful when there are multiple cues to cancel, and when some are hidden in
other layers.
4.7 Dual Cue Mode
With V4 firmware and higher, a second cue bus (Cue B) can be created using
Matrix 7/8. This assignment can be made in the console only.
4.7.1 Channel Mode
In Channel mode, every channel in the console can be assigned to one
of the following Channel Settings:
A
B
A+B
These assignments will be displayed as part of the CUE button for
every channel in StageMix:
If a Cue for a channel is active, the Cue button will be yellow.
4.7.2 Cue Clear
In Channel Mode, a popup will appear when the [CUE CLEAR] button
is pressed. This provides a choice of which Cue busses will be cleared:
[A]
[B]
[ALL]
4.7.3 Remote Mode
In Remote mode, Cue functions in StageMix will exclusively control the
Cue B Bus.
If the [CUE CLEAR] button is pressed, the Cue B Bus will be cleared.
4.8 SOLO Mode
When SOLO mode is ON, the [CUE] buttons in StageMix change to [SOLO]
buttons. These buttons turn red when they are enabled.
Note: this does not apply if Remote mode is also active.
Yamaha Professional Audio CL StageMix V7 User Guide
Page 20
SOLO mode effectively operates in addition to Cue mode. When a
channel is Soloed, it is also Cued.
If Remote mode and SOLO mode are both active, StageMix will control
the Cue B Bus and Solos will be accessible from the console only.
If SOLO mode is used along with Dual Cue Channel Mode, the [SOLO]
buttons will also include A and B indicators to identify their Cue bus
assignments.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93

Yamaha V7 Guida utente

Categoria
Controller DJ
Tipo
Guida utente