Yamaha RX-V363 Manuale del proprietario

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY. LTD.

LEVEL 1, 99 QUEENSBRIDGE STREET, SOUTHBANK, VIC 3006, AUSTRALIA

©

RX-V363

Printed in China WN25930

G

RX-V363

AV Receiver

Ampli-tuner audio-vidéo

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

RX-V363_G-cv.fm Page 1 Wednesday, December 19, 2007 4:04 PM

Black process 45.0° 240.0 LPI

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

En

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place – away from direct sunlight, heat sources, vibration,

dust, moisture, and/or cold. Allow ventilation space of at least

30 cm on the top, 20 cm on the left and right, and 20 cm on

the back of this unit.

3 Locate this unit away from other electrical appliances, motors,

or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, and do not locate this unit in a environment with

high humidity (i.e. a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto

this unit and/or this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid

may cause electrical shock to the user and/or damage to

this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this

unit with a higher voltage than specified is dangerous and may

cause fire, damage to this unit, and/or personal injury. Yamaha

will not be held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13 To prevent damage by lightning, keep the power cord and

outdoor antennas disconnected from a wall outlet or the unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

Yamaha service personnel when any service is needed. The

cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time

(i.e. vacation), disconnect the AC power plug from the wall

outlet.

16 Install this unit near the AC outlet and where the AC power

plug can be reached easily.

17 Be sure to read the “Troubleshooting” section on common

operating errors before concluding that this unit is faulty.

18 Before moving this unit, press ASTANDBY/ON to set this

unit in the standby mode, and disconnect the AC power plug

from the wall outlet.

19 The batteries shall not be exposed to excessive heat such as

sunshine, fire or like.

20 Excessive sound pressure from earphones and headphones can

cause hearing loss.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

Caution: Read this before operating your unit.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet, even

if this unit itself is turned off by

A

STANDBY/ON.

This state is called the standby mode. In this state, this

unit is designed to consume a very small quantity of

power.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured BLUE must be connected to the

terminal which is marked with the letter N or coloured

BLACK. The wire which is coloured BROWN must be

connected to the terminal which is marked with the letter L or

coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

This symbol mark is according to the

EU directive 2002/96/EC.

This symbol mark means that electrical

and electronic equipment, at their end-

of-life, should be disposed of separately

from your household waste.

Please act according to your local rules

and do not dispose of your old products

with your normal household waste.

1 En

PREPARATIONINTRODUCTION

BASIC

OPERATION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

English

Features ................................................................... 2

Getting started ........................................................ 3

Quick start guide .................................................... 4

Preparation: Check the items ..................................... 4

Step 1: Set up your speakers...................................... 5

Step 2: Connect your DVD player and other

components............................................................ 6

Step 3: Turn on the power and press SCENE 1

button..................................................................... 7

What do you want to do with this unit?..................... 8

Connections ............................................................. 9

Rear panel .................................................................. 9

Placing speakers....................................................... 10

Connecting speakers ................................................ 11

Information on jacks and cable plugs ...................... 13

Information on HDMI™.......................................... 14

Connecting video components................................. 15

Connecting audio components................................. 17

Connecting to the VIDEO AUX jacks on the front

panel .................................................................... 18

Connecting the FM and AM antennas ..................... 18

Connecting the power cable..................................... 19

Turning on and off the power .................................. 19

Front panel display .................................................. 20

Optimizing the speaker setting for your listening

room (YPAO) .................................................... 22

Using AUTO SETUP .............................................. 22

Selecting the SCENE templates........................... 25

Selecting the desired SCENE template.................... 25

Creating your original SCENE templates................ 28

Playback ................................................................ 29

Basic operations....................................................... 29

Additional operations............................................... 30

Sound field programs ........................................... 34

Sound field program descriptions............................ 34

FM/AM tuning ...................................................... 37

Automatic tuning ..................................................... 37

Manual tuning.......................................................... 37

Automatic preset tuning........................................... 38

Manual preset tuning ............................................... 38

Selecting preset stations........................................... 39

Exchanging preset stations ...................................... 39

Radio Data System tuning

(Europe and Russia models only).................... 40

Displaying the Radio Data System information ...... 40

Selecting the Radio Data System program type

(PTY SEEK mode).............................................. 41

Using the enhanced other networks (EON) data

service.................................................................. 42

Recording .............................................................. 43

Set menu .................................................................44

Using set menu ........................................................ 45

1 SOUND MENU.................................................... 46

2 INPUT MENU...................................................... 49

3 OPTION MENU................................................... 51

Advanced setup......................................................52

Troubleshooting.....................................................53

Glossary..................................................................58

Specifications .........................................................60

Index .......................................................................61

(at the end of this manual)

Front panel................................................................i

Remote control ....................................................... ii

Contents

INTRODUCTION

PREPARATION

BASIC OPERATION

ADVANCED OPERATION

ADDITIONAL INFORMATION

APPENDIX

About this manual

• y indicates a tip for your operation.

• Some operations can be performed by using either the

buttons on the front panel or the ones on the remote

control. In case the button names differ between the front

panel and the remote control, the button name on the

remote control is given in parentheses.

• This manual is printed prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the

manual and product, the product has priority.

•“

A

STANDBY/ON” or “

4

DVD” (example) indicates

the name of the parts on the front panel or the remote

control. Refer to the attached sheet or the pages at the end

of this manual for the information about each position of

the parts.

•

The symbol “☞ ” with page number(s) indicates the

corresponding reference page(s).

Features

2 En

Built-in 5-channel power amplifier

◆ Minimum RMS output power

(1 kHz, 0.9% THD, 6 Ω)

Front: 100 W/ch

Center: 100 W

Surround: 100 W/ch

SCENE select function

◆ Preset SCENE templates for various situations

◆ SCENE template customizing capability

Decoders and DSP circuits

◆ Proprietary Yamaha technology for the creation of

multi-channel surround sound

◆ Compressed Music Enhancer mode

◆ Dolby Digital decoder

◆ Dolby Pro Logic/Dolby Pro Logic II decoder

◆ DTS decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Sophisticated FM/AM tuner

◆ 40-station random and direct preset tuning

◆ Automatic preset tuning

HDMI (High-Definition Multimedia Interface)

◆ HDMI interface for standard, enhanced or high-definition

video (includes 1080p video signal transmission)

Other features

◆ 192-kHz/24-bit D/A converter

◆ 6 additional input jacks for discrete multi-channel input

◆ Component video input/output capability

(3 COMPONENT VIDEO INs and 1 MONITOR OUT)

◆ Sleep timer

◆ Cinema and music night listening modes

◆ Remote control capability

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

“HDMI”, the “HDMI” logo and “High-Definition Multimedia

Interface” are trademarks or registered trademarks of HDMI

Licensing LLC.

“DTS” and “DTS Digital Surround” are registered trademarks of

DTS, Inc.

Features

Getting started

3 En

INTRODUCTION

English

■ Checking the supplied accessories

Check that you received all of the following parts.

❏ Remote control

❏ Batteries (2) (AAA, R03, UM-4)

❏ AM loop antenna

❏ Indoor FM antenna

❏ Optimizer microphone

■ Installing batteries in the remote control

1 Take off the battery compartment cover.

2 Insert the two supplied batteries

(AAA, R03, UM-4) according to the polarity

markings (+ and –) on the inside of the

battery compartment.

3 Snap the battery compartment cover back

into place.

• Change all of the batteries if you notice the following condition:

– the operation range of the remote control decreases.

• Do not use an old battery and a new one together.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

• Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

Getting started

Notes

1

3

2

Quick start guide

4 En

The following steps describe the easiest way to enjoy

DVD movie playback in your home theater.

Prepare the following items.

❏ Speakers

❏ Front speaker ..................................... x 2

❏ Center speaker ................................... x 1

❏ Surround speaker .............................. x 2

Select magnetically shielded speakers. The

minimum required speakers are two front speakers.

❏ Active subwoofer ................................... x 1

Select an active subwoofer equipped with an RCA

input jack.

❏ Speaker cable ......................................... x 5

❏ Subwoofer cable ..................................... x 1

Select a monaural RCA cable.

❏ DVD player .............................................. x 1

Select DVD player equipped with coaxial digital

audio output jack and composite video output

jack.

❏ Video monitor ......................................... x 1

Select a TV monitor, video monitor or projector

equipped with a composite video input jack.

❏ Video cable ............................................. x 2

Select an RCA composite video cable.

❏ Digital coaxial audio cable .................... x 1

Quick start guide

Front right

speaker

Subwoofer

Surround left

speaker

Front left

speaker

Surround right

speaker

Center speaker

Video monitor

DVD player

Enjoy DVD playback!

Step 1: Set up your speakers

☞

P. 5

Step 2: Connect your DVD player

and other components

Step 3: Turn on the power and

press SCENE 1 button

☞

P. 6

☞

P. 7

Preparation: Check the items

Quick start guide

5 En

INTRODUCTION

English

Place your speakers in the room and connect them to this

unit.

1 Place your speakers and subwoofer in the

room.

2 Connect speaker cables to each speaker.

Cables are colored or shaped differently, perhaps with

a stripe, groove or ridge. Connect the striped

(grooved, etc.) cable to the “+” (red) terminals of

your speaker. Connect the plain cable to the “–”

(black) terminals.

3 Connect each speaker cable to the

corresponding speaker terminal on this unit.

1 Make sure that this unit and the subwoofer are

unplugged from the AC wall outlets.

2 Twist the exposed wires of the speaker cables

together to prevent short circuits.

3 Do not let the bare speaker wires touch each other.

4 Do not let the bare speaker wires touch any metal

part of this unit.

Be sure to connect the left channel (L), right channel

(R), “+” (red) and “–” (black) properly.

Front speakers

Center and surround speakers

4 Connect the subwoofer cable to the input

jack on the subwoofer and the SUBWOOFER

OUTPUT jack on this unit.

Step 1: Set up your speakers

LRLR

LR

L

R

L

R

COMPONENT VIDEO

HDMI

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

OUTPUT

ANTENNA

SPEAKERS

1

2

3

DVD DTV/CBL DVR

DVD

COAXIAL

OPTICAL

CD

DTV/CBL

DTV/

CBL

DVDOUT DTV/CBL

SURROUND CENTER FRONT B

FRONT A

MONITOR

OUT

MD/

CD-R

SUB

WOOFER

OUT

(REC)

IN

(PLAY)

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR CD

IN

OUT

IN

OUT

MONITOR

OUT

AM

GND

FM

75

UNBAL.

Y

P

R

P

B

12 3 4

To the front right

speaker

To the front left

speaker

Loosen Insert Tighten

To the surround

left speaker

To the center speaker

To the surround

right speaker

Press

down

Insert Release

SUBWOOFER

OUTPUT jack

Subwoofer cable

Input jack

AV receiver

Subwoofer

Quick start guide

6 En

1 Connect the digital coaxial audio cable to the

digital coaxial audio output jack on your DVD

player and the DVD DIGITAL INPUT COAXIAL

jack on this unit.

2 Connect the video cable to the composite

video output jack on your DVD player and the

DVD VIDEO jack on this unit.

3 Connect the video cable to the video input

jack on your video monitor and the VIDEO

MONITOR OUT jack on this unit.

4 Connect the power plug of this unit and other

components into the AC wall outlet.

Step 2: Connect your DVD player

and other components

LRLR

LR

L

R

L

R

COMPONENT VIDEO

HDMI

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

OUTPUT

ANTENNA

SPEAKERS

1

2

3

DVD DTV/CBL DVR

DVD

COAXIAL

OPTICAL

CD

DTV/CBL

DTV/

CBL

DVDOUT DTV/CBL

SURROUND CENTER FRONT B

FRONT A

MONITOR

OUT

MD/

CD-R

SUB

WOOFER

OUT

(REC)

IN

(PLAY)

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR CD

IN

OUT

IN

OUT

MONITOR

OUT

AM

GND

FM

75

UNBAL.

Y

P

R

P

B

Make sure that this unit and the DVD

player are unplugged from the AC wall

outlets.

Digital coaxial

audio output

jack

Digital coaxial audio

cable

DVD DIGITAL INPUT

COAXIAL jack

DVD player

AV receiver

Composite video

output jack

Video cable

DVD VIDEO jack

DVD player

AV receiver

■ For further connections

• Using the other kind of speaker

combinations

☞

P. 10

• Connecting a video monitor and

DVD player

☞

P. 15

• Connecting a cable TV/satellite tuner and

DVD recorder

☞

P. 15

• Connecting to the HDMI jacks

☞

P. 16

• Connecting to the COMPONENT VIDEO

jacks

☞

P. 16

• Using the VIDEO AUX jacks on the front

panel

☞

P. 18

• Connecting a CD player and an MD

recorder

☞

P. 17

• Connecting a DVD player via analog

multi-channel audio connection

☞

P. 17

• Connecting an outdoor FM/AM antenna

☞

P. 18

Video monitor

AV receiver

Video input jack

Video cable

VIDEO MONITOR

OUT jack

Quick start guide

7 En

INTRODUCTION

English

1 Turn on the video monitor and then set the

input source selector of the video monitor to

this unit.

2 Press

ASTANDBY/ON

on the front panel.

3 Press

P

SCENE 1.

“DVD Movie Viewing” appears in the front panel

display, and this unit automatically optimize own

status for the DVD playback.

y

The indicator on the selected SCENE button lights up while

this unit is in the SCENE mode.

4 Start playback of the desired DVD on your

player.

5 Rotate

H

VOLUME to adjust the volume.

When you change the input source or sound field program, the

SCENE mode is deactivated and the indicator on the SCENE

button turns off.

■ About SCENE function

Just by pressing one SCENE button, you can turn on this

unit and recall your favorite input source and sound field

program according to the SCENE template that has been

assigned to the SCENE button. The SCENE templates are

built combinations of input sources and sound field

programs.

y

If you connect a Yamaha product that has capability of the

SCENE control signals, this unit can automatically activate the

component and start playback. Refer to the instruction manual of

the DVD player for further information.

■ Using the other SCENE buttons

Step 3: Turn on the power and

press SCENE 1 button

Note

Default

SCENE

button

The name of the SCENE template

and its description

SCENE

1

DVD Movie Viewing

– input source: DVD

– sound field program: STRAIGHT

For when you want to enjoy a movie from the

connected DVD player.

SCENE

2

Music Disc Listening

– input source: DVD

– sound field program: 2ch Stereo

For when you want to listen to a music disc from

the connected DVD player.

SCENE

3

TV Viewing

*1

– input source: DTV/CBL

– sound field program: STRAIGHT

For when you want to watch a TV program.

SCENE

4

Radio Listening

*2, *3, *4

– input source: TUNER

– sound field program: Music Enh. 5ch

For when you want to listen to a music program

from the FM radio station

Quick start guide

8 En

*1

You must connect a cable TV or a satellite tuner to this unit in

advance. See page 16 for details.

*2

You need to connect the supplied FM and AM antennas to this

unit in advance. See page 18 for details.

*3

You have to tune into the desired radio station. See page 37 to

39 for the tuning information.

*4

To achieve the best possible reception, orient the connected

AM loop antenna, or adjust the position of the end of the

indoor FM antenna.

y

If you cannot find the desired situation, you can select and change

the assigned SCENE template for the SCENE buttons. See

page 25 for details.

■ After using this unit...

Press

A

STANDBY/ON on the front panel to set

this unit to the standby mode.

This unit is set to the standby mode. To turn on this unit

from the standby mode, press

A

STANDBY/ON (or

A

POWER). See page 19 for details.

In the standby mode, this unit consumes a small amount of power

in order to receive infrared signals from the remote control.

Notes

Note

What do you want to do with this

unit?

■ Customizing the SCENE templates

• Using various SCENE templates

☞

P. 25

■ Using various input sources

• Basic controls of this unit

☞

P. 29

• Enjoying FM/AM radio programs

☞

P. 37

■ Using various sound features

• Using various sound field programs

☞

P. 34

■ Adjusting the parameters of this unit

• Automatically optimizing the speaker

parameters for your listening room

(AUTO SETUP)

☞

P. 22

• Manually adjusting various parameters of

this unit

☞

P. 44

• Adjusting the advanced parameters

☞

P. 52

■ Additional features

• Automatically turning off this unit

☞

P. 33

Connections

9 En

PREPARATION

English

Connections

Rear panel

Name See page

1

COMPONENT VIDEO jacks 16

2

HDMI jacks 16

3

VIDEO jacks 15

4

ANTENNA terminals 18

5

SPEAKERS terminals 11

6

DIGITAL INPUT jacks 15, 17

7

MULTI CH INPUT jacks 17

8

AUDIO jacks 15, 17

9

SUBWOOFER OUTPUT jack 11

LRLR

LR

L

R

L

R

COMPONENT VIDEO

HDMI

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

OUTPUT

ANTENNA

SPEAKERS

1

2

3

DVD DTV/CBL DVR

DVD

COAXIAL

OPTICAL

CD

DTV/CBL

DTV/

CBL

DVDOUT DTV/CBL

SURROUND CENTER FRONT B

FRONT A

MONITOR

OUT

MD/

CD-R

SUB

WOOFER

OUT

(REC)

IN

(PLAY)

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR CD

IN

OUT

IN

OUT

MONITOR

OUT

AM

GND

FM

75

UNBAL.

Y

P

R

P

B

1234 5

67 8 9

10 En

Connections

The speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and multi-

channel audio sources.

Front left and right speakers (FL and FR)

The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the

ideal listening position. The distance of each speaker from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a

center speaker, you can do without it. Best results, however, are obtained with the full system.

Surround left and right speakers (SL and SR)

The surround speakers are used for effect and surround sounds.

Subwoofer (SW)

The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is

effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity sound reproduction

of the LFE (low-frequency effect) channel included in Dolby Digital and DTS sources. The position of the subwoofer is

not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front

speakers. Turn it slightly toward the center of the room to reduce wall reflections.

Placing speakers

60˚

30˚

FL

FR

C

SL

SR

80˚

SL

FR

FL

C

SL

SR

SW

11 En

Connections

PREPARATION

English

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty,

this unit cannot reproduce the input sources accurately.

■ Before connecting to the SPEAKERS

terminal

A speaker cord is actually a pair of insulated cables

running side by side. Cables are colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (red)

terminals of this unit and your speaker. Connect the plain

cable to the “–” (black) terminals.

Remove approximately 10 mm (3/8”) of insulation

from the end of each speaker cable and then

twist the bare wires of the cable together to

prevent short circuits.

Connecting speakers

Caution

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Before connecting the speakers, make sure that this the AC power plug is disconnected from the AC wall outlet.

• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage

this unit and/or speakers.

• Use magnetically shielded speakers. If this type of speakers still creates the interference with the monitor, place the

speakers away from the monitor.

LRLR

LR

L

R

L

R

COMPONENT VIDEO

HDMI

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

OUTPUT

ANTENNA

SPEAKERS

1

2

3

DVD DTV/CBL DVR

DVD

COAXIAL

OPTICAL

CD

DTV/CBL

DTV/

CBL

DVDOUT DTV/CBL

SURROUND CENTER FRONT B

FRONT A

MONITOR

OUT

MD/

CD-R

SUB

WOOFER

OUT

(REC)

IN

(PLAY)

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR CD

IN

OUT

IN

OUT

MONITOR

OUT

AM

GND

FM

75

UNBAL.

Y

P

R

P

B

Subwoofer

Center

speaker

Front speakers (B)

LeftRight

Surround speakers

Front speakers (A)

LeftRight

10 mm (3/8”)

12 En

Connections

■ Connecting to the FRONT A terminals

1 Loosen the knob.

2 Insert the bare end of the speaker wire into

the slit on the terminal.

3 Tighten the knob to secure the wire.

Connecting the banana plug

(except Europe, Russia, Korea, and Asia models)

The banana plug is a single-pole electrical connector

widely used to terminate speaker cables. First, tighten the

knob and then insert the banana plug connector into the

end of the corresponding terminal.

■ Connecting to the FRONT B, CENTER,

and SURROUND terminals

1 Press down the tab.

2 Insert the bare end of the speaker wire into

the hole on the terminal.

3 Release the tab to secure the wire.

1

2

3

Red: positive (+)

Black: negative (–)

Banana plug

Red: positive (+)

Black: negative (–)

13 En

Connections

PREPARATION

English

■ Audio jacks

This unit has three types of audio jacks. Connection

depends on the availability of audio jacks on your other

components.

AUDIO jacks

For conventional analog audio signals transmitted via left

and right analog audio cables. Connect red plugs to the

right jacks and white plugs to the left jacks.

DIGITAL AUDIO COAXIAL jacks

For digital audio signals transmitted via coaxial digital

audio cables.

DIGITAL AUDIO OPTICAL jacks

For digital audio signals transmitted via optical digital

audio cables.

• You can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. All digital input jacks are compatible with

digital signals with up to 96 kHz of sampling frequency.

• This unit handles digital and analog signals independently. Thus

audio signals input at the digital jacks are not output at the

analog AUDIO OUT (REC) jacks.

■ Video jacks

This unit has two types of video jacks. Connection

depends on the availability of input jacks on your video

monitor.

VIDEO jacks

For conventional composite video signals transmitted via

composite video cables.

COMPONENT VIDEO jacks

For component signals, separated into the luminance (Y)

and chrominance (P

B, PR) video signals transmitted on

separate wires of component video cables.

Information on jacks and cable plugs

VIDEO

COMPONENT VIDEO

Y P

B

P

R

PB

Y

P

R

V

COAXIAL

DIGITAL AUDIO

AUDIO

OPTICAL

DIGITAL AUDIO

R

L

C

O

R

L

Left and right

analog audio

cable plugs

Optical

digital

audio cable

plug

Coaxial

digital audio

cable plug

Composite

video cable

plug

Component

video cable

plugs

Audio jacks and cable plugs Video jacks and cable plugs

(Red)(White) (Orange) (Yellow) (Green) (Blue) (Red)

Notes

PR

P

B

Y

P

R

P

B

Y

Video signal flow for MONITOR OUT

Output

(MONITOR OUT)

Input

COMPONENT

VIDEO

14 En

Connections

You can play back pictures by connecting your video monitor and video source component to this unit using HDMI

connections.

At that time, audio/video signals output from the connected component (such as DVD player etc.) are output to the

connected video monitor only when this unit is turned on and set to the input source (DVD or DTV/CBL).

Furthermore, available audio/video signals depend on the specification of the connected video monitor. Refer to the

instruction manual of each connected component.

■ HDMI jack and cable plug

y

• We recommend using an HDMI cable shorter than 5 meters

(16 feet) with the HDMI logo printed on it.

• Use a conversion cable (HDMI jack

↔ DVI-D jack) to connect

this unit to other DVI components.

Information on HDMI™

Audio signals input at the HDMI jack are not output from any speaker terminals but output from the connected video

monitor.

To enjoy the sound from speakers connected to this unit,

–make an analog or digital connection besides the HDMI connection (see page 16).

–mute the volume of the connected video monitor.

HDMI cable

plug

HDMI

15 En

Connections

PREPARATION

English

y

You can also connect a video monitor, DVD player, digital TV,

and cable TV to this unit using the HDMI or COMPONENT

VIDEO connection (see page 16).

■ Connecting a video monitor and a DVD

player

*

When you use the internal tuner of the TV as the input source,

connect the digital or analog audio output jacks of the TV and

digital or analog audio input jacks of this unit.

■ Connecting a cable TV/satellite tuner

and a DVD recorder

Connecting video components

Make sure that this unit and other

components are unplugged from the

AC wall outlets.

L

R

L

R

COMPONENT VIDEO

HDMI

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

1

2

3

DVD DTV/CBL DVR

DVD

COAXIAL

OPTICAL

CD

DTV/CBL

DTV/

CBL

DVDOUT DTV/CBL

MONITOR

OUT

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR CD

IN

OUT

IN

OUT

MONITOR

OUT

Y

P

R

P

B

C

L

R

VV

DVD player

Video monitor*

Video in

Audio out

Video out

indicates recommended connections

indicates alternative connections

L

R

L

R

COMPONENT VIDEO

HDMI

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

1

2

3

DVD DTV/CBL DVR

DVD

COAXIAL

OPTICAL

CD

DTV/CBL

DTV/

CBL

DVDOUT DTV/CBL

MONITOR

OUT

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR CD

IN

OUT

IN

OUT

MONITOR

OUT

Y

P

R

P

B

L

R

L

R

L

R

VVV

O

Cable TV or

Satellite tuner

DVD recorder

Audio out

Video out

Audio out

Video out

Audio in

Video in

indicates recommended connections

indicates alternative connections

16 En

Connections

■ Connecting to the HDMI or COMPONENT VIDEO jacks

You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using

HDMI or COMPONENT VIDEO connections.

Be sure to connect your video components in the same way you connect your video monitor to this unit. For example, if you connect

your video monitor to this unit using an HDMI or COMPONENT VIDEO connection, connect your video components to this unit using

the HDMI or COMPONENT VIDEO connection.

HDMI connection

• Connect the input source components to the HDMI DVD or

HDMI DTV/CBL jack to display the video images on the video

monitor connected to the HDMI OUT jack.

• Audio/video signals output from the connected component

(such as DVD player etc.) are output to the connected video

monitor only when this unit is turned on and set to the input

source (DVD or DTV/CBL).

• Available audio/video signals depend on the specification of the

connected video monitor. Refer to the instruction manual of

each connected component.

Connecting to the COMPONENT VIDEO jacks

Note

Audio signals input at the HDMI jack are not output

from any speaker terminals but output from the

connected video monitor.

To enjoy the sound from speakers connected to this unit,

– make an analog or digital connection besides the

HDMI connection (see page 15).

– mute the volume of the connected video monitor.

Notes

O

MPONENT VIDEO

HDMI

VIDEO

AUDIOMULTI CH INPUT

ANTENNA

D

TV/CBL DVR

DVD DTV/CBL

DVDOUT DTV/CBL

MONITOR

OUT

DVR

IN

OUT

MONITOR

OUT

AM

GND

FM

75

UNBAL.

Video monitor

Cable TV or

satellite tuner

DVD player

L

R

L

R

COMPONENT VIDEO

H

D

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

1

2

3

DVD DTV/CBL DVR

DVD

COAXIAL

OPTICAL

CD

DTV/CBL

DTV/

CBL

DVDOUT DTV/CBL

MO

N

O

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR

C

IN

OUT

IN

OUT

MONITOR

OUT

Y

P

R

P

B

P

R

P

B

Y

P

R

P

B

Y

P

R

P

B

Y

P

R

P

B

Y

DVD player

Video monitor

Cable TV or

satellite tuner

DVD recorder

Video in

Video out

17 En

Connections

PREPARATION

English

■ Connecting a CD player and a CD

recorder/MD recorder

When you connect your CD player via analog and digital

connection, priority is given to the signal input at the DIGITAL

INPUT jack.

■ Connecting to the MULTI CH INPUT jacks

This unit is equipped with 6 additional input jacks (FRONT L/R, SURROUND L/R, CENTER and SUBWOOFER) for

discrete multi-channel input from a multi-format player, external decoder or sound processor. Connect the output jacks

on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right

output jacks to the left and right input jacks for the front and surround channels.

• When you select the component connected to the MULTI CH

INPUT jacks as the input source (see page 30), this unit

automatically turns off the digital sound field processor, and

you cannot select sound field programs.

• This unit does not redirect signals input at the MULTI CH

INPUT jacks to accommodate for missing speakers. We

recommend that you connect a 5.1-channel speaker system

before using this feature.

Connecting audio components

Note

Make sure that this unit and other

components are unplugged from the

AC wall outlets.

L

R

L

R

VIDEO

AUDIOMULTI CH INPUT

DIGITAL INPUT

OUTPUT

1

2

3

DVD

COAXIAL

OPTICAL

CD

DTV/CBL

DTV/

CBL

MONITOR

OUT

MD/

CD-R

SUB

WOOFER

OUT

(REC)

IN

(PLAY)

DVR

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR CD

IN

OUT

IN

OUT

GND

FM

75

UNBAL.

Y

P

B

L

R

L

R

L

R

O

CD player CD recorder or MD

recorder

Audio outAudio out Audio inAudio out

indicates recommended connections

indicates alternative connections

L

R

L

R

MULTI CH INPUT

1

2

3

DVD

COAXIAL

CD

DTV/

CBL

DVD

FRONT CENTER

SUBWOOFER

SURROUND

DTV/CBL DVR

IN

L

R

L

R

Multi-format player or

external decoder

Center out

Subwoofer out

Surround out

Front out

Notes

18 En

Connections

Use the VIDEO AUX jacks on the front panel to connect a

game console or a video camera to this unit.

• To reproduce the source signals input at these jacks, select

“V-AUX” as the input source.

• The audio signals input at the PORTABLE mini jack take

priority over the ones input at the AUDIO L/R jacks.

Both FM and AM indoor antennas are supplied with this

unit. In general, these antennas should provide sufficient

signal strength. Connect each antenna correctly to the

designated terminals.

• The AM loop antenna should be placed away from this unit.

• A properly installed outdoor antenna provides clearer reception

than an indoor one. If you experience poor reception quality,

install an outdoor antenna. Consult the nearest authorized

Yamaha dealer or service center about outdoor antennas.

• The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

Connecting to the VIDEO AUX jacks

on the front panel

Caution

Be sure to turn down the volume of this unit and other

components before making connections.

Notes

STANDBY

/ON

PHONES

SPEAKERS

A/B/OFF

SILENT CINEMA

EDIT

PRESET/TUNING

BAND A/B/C/D/E

TONE CONTROL

PROGRAM

STRAIGHT NIGHT

EFFECT

SCENE

PRESET/TUNING MEMORY

OPTIMIZER MIC

TUNING AUTO/MAN'L

AUDIO SELEC T

INPUT

1234

VOLUME

R

L

AUDIO PORTABLE

VIDEO AUX

VIDEO

VIDEO L AUDIO R PORTABLE

VIDEO AUX

V

L

R

Game console or

video camera

3.5 mm

stereo mini

plug

Audio out

Video out

Connecting the FM and AM

antennas

Notes

E

O

ANTENNA

L

R

SURROUND

AUDIO OUTPUT

DVR

CD

DVR

AM

GND

FM

UNBAL.

75

OUT

MONITOR

OUT

MD/

O

UT

IN

AM loop

antenna

(supplied)

Ground

For maximum safety and

minimum interference,

connect the antenna GND

terminal to a good earth

ground. A good earth ground

is a metal stake driven into

moist earth.

Indoor FM

antenna

(supplied)

Outdoor AM antenna

Use a 5 to 10 m (16 to 32 ft) of

vinyl-covered wire extended

outdoors from a window.

La pagina si sta caricando...

Yamaha RX-V363 Manuale del proprietario

Yamaha RX-V363 Manuale del proprietario

in altre lingue

Altri documenti