Yamaha P-95B Manuale del proprietario

Categoria
Tastiere MIDI
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

RU
ES
DE
FR
EN
ENGLISHDEUTSCH FRANÇAISESPAÑOL
Owner’s Manual
Mode d'emploi
Bedienungsanleitung
Manual de instrucciones
P-95B/P-95S
DIGITAL PIANO
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter). DO
NOT connect this product to any power supply or adapter other than one
described in the manual, on the name plate, or specifically recom-
mended by Yamaha.
WARNING: Do not place this product in a position where anyone could
walk on, trip over, or roll anything over power or connecting cords of any
kind. The use of an extension cord is not recommended! If you must use
an extension cord, the minimum wire size for a 25’ cord (or less) is 18
AWG. NOTE: The smaller the AWG number, the larger the current han-
dling capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at the
time of printing. However, Yamaha reserves the right to change or modify
any of the specifications without notice or obligation to update existing
units.
This product, either alone or in combination with an amplifier and head-
phones or speaker/s, may be capable of producing sound levels that
could cause permanent hearing loss. DO NOT operate for long periods
of time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult an
audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and / or accessory mounting
fixtures that are either supplied with the product or as optional accesso-
ries. Some of these items are designed to be dealer assembled or
installed. Please make sure that benches are stable and any optional fix-
tures (where applicable) are well secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are not
covered by the manufacturer’s warranty, and are therefore the owners
responsibility. Please study this manual carefully and consult your dealer
before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and environ-
mentally friendly. We sincerely believe that our products and the produc-
tion methods used to produce them, meet these goals. In keeping with
both the letter and the spirit of the law, we want you to be aware of the
following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of bat-
tery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating and
battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all batter-
ies away from children. Dispose of used batteries promptly and as regu-
lated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some reason
its useful life is considered to be at an end, please observe all local,
state, and federal regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc. If your dealer is unable to assist
you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model num-
ber, serial number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the date of pur-
chase in the spaces provided below and retain this manual as a perma-
nent record of your purchase.
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
92-BP (bottom)
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accor-
dance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured makings identifying the ter-
minals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the ter-
minal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal
of the three pin plug.
This applies only to products distributed by Yamaha-Kemble
Music (U.K.) Ltd.
(2 wires)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted by
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class “B” digital
devices. Compliance with these requirements provides a reason-
able level of assurance that your use of this product in a residential
environment will not result in harmful interference with other elec-
tronic devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions found in
the users manual, may cause interference harmful to the operation
of other electronic devices. Compliance with FCC regulations does
not guarantee that interference will not occur in all installations. If
this product is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please contact
Yamaha Corporation of America, Electronic Service Division, 6600
Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by
Yamaha Corporation of America or its subsidiaries.
FCC INFORMATION (U.S.A.)
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
(class B)
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den
ar ansluten till vägguttaget, även om själva apparaten har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,
sålæenge netledningen siddr i en stikkontakt, som er t endt — også
selvom der or slukket på apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko
laitetta verkosta.
(standby)
1
P-95 Owner’s Manual
ENGLISH
4
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
• Do not place the power cord near heat sources such as heaters or
radiators, and do not excessively bend or otherwise damage the
cord, place heavy objects on it, or place it in a position where
anyone could walk on, trip over, or roll anything over it.
• Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
• Use the specified adaptor (page 31) only. Using the wrong adaptor
can result in damage to the instrument or overheating.
• Check the electric plug periodically and remove any dirt or dust
which may have accumulated on it.
This instrument contains no user-serviceable parts. Do not open the
instrument or attempt to disassemble or modify the internal
components in any way. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or
wet conditions, or place containers on it containing liquids which
might spill into any openings. If any liquid such as water seeps into
the instrument, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the instrument inspected
by qualified Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.
• Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
When one of the following problems occur, immediately turn off the
power switch and disconnect the electric plug from the outlet. Then
have the device inspected by Yamaha service personnel.
• The power cord or plug becomes frayed or damaged.
• It emits unusual smells or smoke.
• Some object has been dropped into the instrument.
• There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
• Do not connect the instrument to an electrical outlet using a
multiple-connector. Doing so can result in lower sound quality, or
possibly cause overheating in the outlet.
• When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord can
damage it.
• Remove the electric plug from the outlet when the instrument is not
to be used for extended periods of time, or during electrical storms.
• Do not place the instrument in an unstable position where it might
accidentally fall over.
• Before moving the instrument, remove all connected cables.
• When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from
the outlet. Even when the power switch is turned off, electricity is
still flowing to the product at the minimum level. When you are not
using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.
• Use only the stand specified for the instrument. When attaching the
stand or rack, use the provided screws only. Failure to do so could
cause damage to the internal components or result in the instrument
falling over.
• Before connecting the instrument to other electronic components,
turn off the power for all components. Before turning the power on
or off for all components, set all volume levels to minimum.
• Be sure to set the volumes of all components at their minimum
levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.
• Do not insert a finger or hand in any gaps on the instrument.
• Never insert or drop paper, metallic, or other objects into the gaps
on the panel or keyboard.
• Do not rest your weight on, or place heavy objects on the
instrument, and do not use excessive force on the buttons, switches
or connectors.
Do not use the instrument/device or headphones for a long period of
time at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or
ringing in the ears, consult a physician.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/AC power adaptor
Location
Connections
Handling caution
(7)-1 1/2
2
P-95 Owner’s Manual
ENGLISH
5
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in the “Standby” position, electricity is still flowing to the instrument at the minimum level. When you are
not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
NOTICE
To avoid the possibility of damage to the product, data or other property, follow the notices below.
Handling and Maintainance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio
may generate noise.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)
to prevent the possibility of panel disfiguration or damage to the internal components.
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
When cleaning the instrument, use a soft, dry/cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Saving data
Some data will be saved to internal memory of the instrument. The data is maintained even when the power is turned off.
Saved data may be lost due to malfunction or incorrect operation. Save important data to a computer (page 25).
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights.
Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized
use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE,
DISTRIBUTE OR USE ILLEGAL COPIES.
About this manual
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.
For the sake of simplicity, both models P-95B and P-95S are hereafter referred to in this Owner’s Manual as P-95.
The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
(weee_eu)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products
should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with
your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal
service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer
and ask for the correct method of disposal.
(7)-1 2/2
3
The serial number of this product may be found on the bottom of the unit.
You should note this serial number in the space provided below and retain
this manual as a permanent record of your purchase to aid identification in
the event of theft.
Model No.
Serial No.
(bottom)
P-95 Owner’s Manual
ENGLISH
6
Introduction
Thank you for purchasing the Yamaha P-95B/P-95S!
We recommend that you read this manual carefully
so that you can fully take advantage of the advanced and
convenient functions of the P-95B/P-95S.
We also recommend that you keep this manual in a safe and
handy place for future reference.
Main Features
Graded Hammer Standard Keyboard
Thanks to our experience as the world’s leading manufacturer of acoustic pianos, we’ve developed a keyboard with
action that’s virtually indistinguishable from the real thing. Just as on a traditional acoustic piano, the keys of the lower
notes have a heavier touch, while the higher ones are more responsive to lighter playing. The keyboard’s sensitivity can
even be adjusted to match your playing style. This Graded Hammer technology also enables the P-95 to provide
authentic touch in a lightweight instrument.
AWM Stereo Sampling
This instrument offers unmatched sonic realism and natural grand-piano type playability as well as Yamahas original
“AWM Stereo Sampling tone-generation technology for rich, musical voices.
In particular, the Grand Piano 1 and 2 voices feature samples painstakingly recorded from a full concert grand piano,
while the Electric Piano 1 and 2 voice features multiple samples for different velocities (Dynamic Sampling); in other
words, it uses different samples depending on the strength of your playing.
Accessories
Owner’s Manual
•AC Power Adaptor
* May not be included depending on your particular area. Please check with your Yamaha dealer.
Footswitch
•Music Rest
•My Yamaha Product User Registration
* The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.
4
P-95 Owner’s Manual
ENGLISH
7
Tab le of Contents
PRECAUTIONS.................................................................................. 4
Introduction
Main Features................................................................................... 6
Accessories .......................................................................................6
Panel Controls and Terminals.......................................................... 8
Before Using.....................................................................................9
Turning the Power On .................................................................................... 9
Setting the Volume.......................................................................................... 9
Using the Pedal .............................................................................................. 10
Using Headphones ........................................................................................11
Music Rest...................................................................................................... 11
Reference
Listening to the Demo Songs ........................................................12
Listening to the Piano Preset Songs..............................................13
Using the Metronome.................................................................... 14
Setting the Time Signature............................................................................ 14
Adjusting the Tempo..................................................................................... 14
Adjusting the Volume ...................................................................................15
Selecting & Playing Voices.............................................................16
Selecting Voices .............................................................................................16
Combining Voices (Dual)............................................................................. 17
Adding Variations to the Sound – Reverb ...................................................18
Transposition................................................................................................. 19
Fine tuning of the Pitch................................................................................. 19
Touch Sensitivity ........................................................................................... 20
Recording Your Performance ........................................................21
Recording a performance.............................................................................. 21
Play back the recorded performance ............................................................ 22
Changing the Settings of the Recorded Data ...............................................23
Connecting MIDI Instruments ....................................................... 24
About MIDI ................................................................................................... 24
Connecting a Personal Computer ................................................................ 24
Transferring Backup Data between the Computer and the Instrument .... 25
Initializing the Settings.................................................................................. 25
MIDI Functions............................................................................... 26
MIDI Transmit/Receive Channel Selection ................................................. 26
Local Control ON/OFF ................................................................................. 26
Program Change ON/OFF............................................................................ 27
Control Change ON/OFF ............................................................................. 27
Troubleshooting.............................................................................28
Optional Equipment.......................................................................28
Appendix
Preset Song List.............................................................................. 30
Specifications .................................................................................31
Quick Operation Guide ..................................................................32
This is a quick reference for operation of the functions assigned to the buttons and keyboard.
5
Online Materials
(Downloadable from the web)
The following instructional materials
are available for downloading from the
Yamaha Manual Library. Access the
Yamaha Manual Library, then enter
your model name (P-95, for example)
in the Model Name area to search the
manuals.
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
• Data List
The Data List contains MIDI related
information, such as the MIDI Data
Format and MIDI Implementation
chart.
• MIDI Basics
If you want to know more about MIDI
and how to use it, refer to this intro-
ductory book.
Panel Controls and Terminals
P-95 Owner’s Manual
ENGLISH
8
Panel Controls and Terminals
1 [] (Standby/On) switch ..............page 9
For turning the power on or off.
2 [MASTER VOLUME] slider ............. page 9
For adjusting the volume level of the entire sound.
3 [DEMO/SONG] button .........pages 12, 13
For playing the demo songs and the piano preset
songs.
4 TEMPO [
gg
gg
] [
hh
hh
]/SELECT [
QQ
QQ
] [
WW
WW
] buttons
..............................................pages 12, 13
While playing a voice demo or piano preset song,
pressing these buttons lets you select the next or pre-
vious song. These buttons can also be used to change
the song tempo.
5 [METRONOME] button................ page 14
For using the metronome.
6 [REC] button ................................ page 21
For recording your keyboard performance.
7 [PLAY] button .............................. page 22
For playing back the recorded performance.
8 VOICE buttons .............................page 16
For selecting voices from 10 internal sounds includ-
ing Grand Piano 1 and 2. You can also combine two
voices and use them together.
9 [PEDAL UNIT] jack........................page 10
For connecting an optional pedal unit (LP-5A).
) DC IN jack ......................................page 9
For connecting the power adaptor.
! MIDI [IN] [OUT] terminals...........page 24
For connecting external MIDI devices, allowing the
use of various MIDI functions.
@ [SUSTAIN] jack .............................page 10
For connecting an included pedal, optional FC3 foot
pedal or FC4 foot switch.
# [PHONES] jack..............................page 11
For connecting a set of standard stereo headphones,
allowing private practice.
$ Metronome indication.................page 14
Indicates the keys used for making metronome set-
tings.
9) ! @
#
12345
867
$
Shows the
jacks and ter-
minals as
seen when
viewed from
the rear of the
instrument.
Shows the
jacks and ter-
minals as
seen when
viewed from
the rear of the
instrument.
6
Before Using
P-95 Owner’s Manual
ENGLISH
9
Before Using
Turning the Power On
1. Connect the AC adaptor to the power sup-
ply jack.
WARNING
Use the specified adaptor (page 31) only. The use of other adaptors
may result in irreparable damage to both the adaptor and the instru-
ment.
2. Plug the AC adaptor into an AC outlet.
CAUTION
Unplug the AC Power Adaptor when not using the instrument, or
during electrical storms.
3. Press the [ ] (Standby/On) switch to turn
on the power.
The power indicator located to the left of the [] (Standby/On)
switch lights up.
Pressing the switch again turns the power off.
CAUTION
Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC
outlet.
Setting the Volume
Initially set the [MASTER VOLUME] slider about halfway between the
“MIN” and “MAX settings. Then, when you start playing, re-adjust the
[MASTER VOLUME] slider to the most comfortable listening level.
TERMINOLOGY
MASTER VOLUME:
The volume level of the entire keyboard sound
1.
2.
Adaptor
AC outlet
3.
The level increases.The level decreases.
7
Before Using
P-95 Owner’s Manual
ENGLISH
10
Using the Pedal
[SUSTAIN] jack
This jack is for connecting the included pedal. The pedal functions in the
same way as a damper pedal on an acoustic piano. Connect an optional
pedal to this jack and press the pedal to sustain the sound.
An optional FC3 foot pedal or FC4 foot switch can also be connected to
this jack.
If you connect an optional pedal of FC3, the half pedal function* can be
used.
* half pedal function
While you playing the piano with SUSTAIN and if you need to delete the
cloudy sound, release the foot from pedal to half position.
[PEDAL UNIT] jack
This jack is for connecting an optional LP-5A
pedal unit. When connecting the pedal unit, make
sure to also assemble the unit on an optional key-
board stand (L-85/L-85S).
Do not press the footswitch while turning the power on. Doing this
changes the recognized polarity of the footswitch, resulting in reversed
footswitch operation.
Make sure that power is OFF when connect-
ing or disconnecting the pedal.
Pedal Unit Functions
The optional pedal unit has three foot pedals that produce a range of
expressive effects similar to those produced by the pedals on an acoustic
piano.
Damper (Right) Pedal
The damper pedal functions in the same way as a damper pedal on an
acoustic piano. When the damper pedal is pressed, notes sustain longer.
Releasing the pedal immediately stops (damps) any sustained notes.
A “half-pedal” effect lets you use the damper pedal to create partial sus-
tain effects, depending on how far down you press the pedal.
Sostenuto (Center) Pedal
If you play a note or chord on the keyboard and press the sostenuto
pedal while the note(s) are held, those notes will sustain as long as you
hold the pedal (as if the damper pedal had been pressed) but all subse-
quently played notes will not be sustained. This makes it possible to sus-
tain a chord, for example, while other notes are played “staccato.
Soft (Left) Pedal
The soft pedal reduces the volume and slightly changes the timbre of
notes played while the pedal is pressed. The soft pedal will not affect
notes that are already playing when it is pressed.
LP-5A
(optional)
L-85/L-85S
(optional)
NOTE
NOTE
When you press the damper
pedal here, the notes you play
before you release the pedal
have a longer sustain.
When you press the soste-
nuto pedal here while holding
the note, the note will sustain
as long as you hold the
pedal.
8
Before Using
P-95 Owner’s Manual
ENGLISH
11
Using Headphones
Connect a set of headphones to one of the [PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo headphones. (If you are
using only one set of headphones, you can plug them into either jack.)
CAUTION
To protect your hearing, avoid listening with the headphones at a high vol-
ume level for long periods of time.
Music Rest
This instrument includes a music rest that can be attached to the instrument by inserting it into the slot at the top of the
control panel.
Speakers are built into the instrument at the bottom.
Though you can enjoy playing the instrument even when putting it on a desk or table, we recommend that you use an
optional keyboard stand for better sound.
Standard stereo phone plug
9
Listening to the Demo Songs
P-95 Owner’s Manual
ENGLISH
12
Listening to the Demo Songs
Demo songs are provided that effectively demonstrate each of the voices.
1. While holding down the [DEMO/SONG] button,
press one of the voice buttons to listen to the demo
songs.
The demo song will start. Demo songs provided for each voice will play back in
sequence until you press the [DEMO/SONG] button.
Changing a Demo Song
You can change to another demo song during playback by pressing the SELECT
[
QQ
QQ
]/[
WW
WW
] button.
You can also change to another demo song during playback by pressing any one
of the voice buttons.
While holding down the [METRONOME] button, use the TEMPO [
gg
gg
]/[
hh
hh
] but-
tons to change the playback tempo.
Demo Song List
The demonstration pieces listed above are short rearranged excerpts of the original
compositions.
All other songs are original (© 2010 Yamaha Corporation).
2. Press the [DEMO/SONG] button to
stop the voice demo.
Refer to the voice list on page 16
for more information on the char-
acteristics of each preset voice.
Simply by pressing the [DEMO/
SONG] button, you can start the
GRAND PIANO 1 demo song and
the other demo songs provided
for each voice will play back in
sequence.
The demo songs will not be trans-
mitted via MIDI.
NOTE
NOTE
NOTE
Voice Name Title Composer
PIPE ORGAN Herr Christ, der ein’ge
Gottes-Sohn, BWV.601
J.S. Bach
HARPSICHORD Concerto a cembalo
obbligato, 2 violini, viola
e continuo No.7,
BWV.1058
J.S. Bach
Reference
10
Listening to the Piano Preset Songs
P-95 Owner’s Manual
ENGLISH
13
Listening to the Piano Preset Songs
This instrument provides performance data for piano songs as well as voice demo songs, for your
listening pleasure.
1. While holding down the [DEMO/SONG] button,
press one of the C2–C##
##
6 keys to select a song to
play back.
The number of each piano preset song is assigned to the C2–C#6 keys.
The preset songs will play back consecutively in sequence until you press the
[DEMO/SONG] button.
Press the SELECT [
QQ
QQ
] or [
WW
WW
] button to change to the next piano song.
While holding down the [METRONOME] button, use the TEMPO [
gg
gg
]/[
hh
hh
] but-
tons to change the playback tempo.
2. Press the [DEMO/SONG] button to stop playback.
To continue playing other songs, see step 1 above.
TERMINOLOGY
Song:
In this manual, performance data
is called a “Song.” This includes
demonstration tunes and piano
preset tunes.
Preset:
Preset Data supplied with the
internal memory of the P-95
shipped from the factory.
The Preset Song List appears on
page 30.
Refer to the Quick Operation
Guide on page 32 for details on
key assignments.
You can play the keyboard along
with the preset song. You can
change the voice playing on the
keyboard.
When you select a different song
(or a different song is selected
during chained playback), an
appropriate reverb type will be
selected accordingly.
The piano preset songs are not
transmitted via MIDI.
NOTE
NOTE
NOTE
NOTE
NOTE
C2 C3 C4 C5 C6
1st song 10th song 20th song 30th song 40th song 50th song
11
Using the Metronome
P-95 Owner’s Manual
ENGLISH
14
Using the Metronome
This instrument features a built-in metronome (a device that keeps an accurate tempo) that is con-
venient for practicing.
1. Press the [METRONOME] button
to turn on the metronome.
Start the metronome.
2. Press the [METRONOME] button
to stop the Metronome.
Setting the Time Signature
While holding down the [METRONOME] button,
press one of the A0–D1 keys.
The first beat is accented with a bell sound and the rest with clicks. Default set is
0/4 (A0). In this setting, clicks sound in all beats.
The time signature can also be changed by the following operation.
While holding down the [METRONOME] button, press one of the voice buttons
(GRAND PIANO 1–PIPE ORGAN).
Adjusting the Tempo
The tempo of the metronome can be set from 32 to 280 beats per minute.
A number is assigned to each of the following keys.
While holding down the [METRONOME] button, press a sequence of F3–D4
keys to specify a three-digit number.
Key Time signature
A0 0/4
A#0 2/4
B0 3/4
C1 4/4
C#1 5/4
D1 6/4
TERMINOLOGY
Default setting:
The “Default setting” refers to the
factory setting obtained when you
first turn on the power to the P-95.
A0 D1C0
0/4 2/4 3/4 4/4 5/4 6/4
Default setting (Metronome):
120
NOTE
12
Using the Metronome
P-95 Owner’s Manual
ENGLISH
15
Select a number starting from the left-most digit. For example, to set the
tempo “95, press the F3 (0), D4 (9) and A#3 (5) keys in sequence.
Increasing the tempo value in steps of one:
While holding down the [METRONOME] button, press the F#4 key.
Decreasing the tempo value in steps of one:
While holding down the [METRONOME] button, press the E4 key.
Increasing the tempo value in steps of ten:
While holding down the [METRONOME] button, press the G4 key.
Decreasing the tempo value in steps of ten:
While holding down the [METRONOME] button, press the D#4 key.
Resetting the tempo to default:
While holding down the [METRONOME] button, press the F4 key.
The tempo value can also be changed by the following operation.
While holding down the [METRONOME] button, use the TEMPO [
gg
gg
]/[
hh
hh
]
button to increase or decrease in single steps.
While holding down the [METRONOME] button, press both TEMPO [
gg
gg
]/
[
hh
hh
] buttons simultaneously to restore the default tempo.
Adjusting the Volume
You can change the volume of the metronome sound.
While holding down the [METRONOME] button,
press one of the A-1–F##
##
0 keys to determine the vol-
ume.
Pressing a higher key in the key range results in a higher volume, while pressing
a lower key results in lower volume.
F3(0)
A#3(5)
D4(9)
G4(+10)
E4(-1)
D#4(-10)
F#4(+1)
F4(default)
Metronome volume range:
A-1 (1)–F#0 (10)
Default setting: D#0 (7)
NOTE
A-1(1)
F#0(10)
13
Selecting & Playing Voices
P-95 Owner’s Manual
ENGLISH
16
Selecting & Playing Voices
Selecting Voices
1. Press one of the voice buttons.
2. Adjust the volume.
Re-adjust the [MASTER VOLUME] slider (page 9) for the most comfortable lis-
tening level during your performance.
To familiarize yourself with the
characteristics of the voices, lis-
ten to the demo songs for each
voice (page 12).
TERMINOLOGY
Voice:
In this manual, the term “voice”
means “instrument sound.”
When you select a voice, an
appropriate reverb type will be
selected automatically (page 18).
NOTE
NOTE
Voice Name Description
GRAND PIANO 1
Recorded samples from a full concert grand piano. Perfect for
classical compositions as well as any other style that requires
acoustic piano.
GRAND PIANO 2 Clear piano with bright reverb. Good for popular music.
E. PIANO 1
An electronic piano sound created by FM synthesis. Good for
popular music.
E. PIANO 2
The sound of an electric piano using hammer-struck metallic
“tines.” Soft tone when played lightly, and an aggressive tone
when played hard.
JAZZ ORGAN
The sound of a tonewheel type electric organ. Often heard in jazz
and rock idioms.
PIPE ORGAN
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good
for sacred music from the Baroque period.
STRINGS
Spacious and large-scale string ensemble. Try combining this
voice with piano in DUAL.
CHOIR
A big, spacious choir voice. Perfect for creating rich harmonies in
slow pieces.
HARPSICHORD
The definitive instrument for baroque music. Since the strings of a
harpsichord are plucked, there is no touch response.
VIBRAPHONE The sound of a vibraphone played with relatively soft mallets.
14
Selecting & Playing Voices
P-95 Owner’s Manual
ENGLISH
17
Combining Voices (Dual)
You can play voices simultaneously across the entire range of the keyboard. In this way, you can
combine similar voices to create a thicker sound.
1. Press two voice buttons simultaneously to engage
Dual.
According to the voice button position on the panel, the voice on the left will be
designated as Voice 1, and the other will be designated as Voice 2.
You can make the following settings for Voices 1 and 2 in Dual:
Setting the Octave
You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde-
pendently. Depending on which voices you combine in Dual, the combination
may sound better if one of the voices is shifted up or down an octave.
While holding down the [METRONOME] button, press one of the A4–D5 keys.
Setting the Balance
You can adjust the volume balance between two voices. For example, you can set
one voice as the main voice with a louder setting, and make the other voice softer.
While holding down the [
METRONOME
] button, press one of the F#5–F#6 keys.
A setting of “0” produces an equal balance between the two Dual voices. Settings
below “0” increase the volume of Voice 2 in relation to Voice 1, and settings above
“0” increase the volume of Voice 1 in relation to Voice 2.
2. Press one of the voice buttons to exit Dual and
return to the normal single-voice play.
Reverb in Dual
The reverb type assigned to
Voice 1 will take priority. If the
reverb assigned to Voice 1 is set
to OFF, the reverb assigned to
Voice 2 will be in effect.
NOTE
Voice 1
A4 -1
Voice 2
C5 -1
A#40 C#50
B4 +1 D5 +1
D5A4
Voice 2Voice 1
C6(0)
F#6 (+6)F#5 (-6)
15
Selecting & Playing Voices
P-95 Owner’s Manual
ENGLISH
18
Adding Variations to the Sound – Reverb
This control enables you to select four different types of reverb effect that add extra depth and
expression to the sound to create a realistic acoustic ambience.
Selecting a Reverb Type
While holding down the [METRONOME] button, press one of the G#6–C7 keys
to select a reverb type.
Adjusting Reverb Depth
While holding down the [METRONOME] button, press one of the F1–C#3 keys
to adjust the reverb depth for the selected voice.
While holding down the [METRONOME] button, press the D3 key to set the
reverb to the depth most suitable for the selected voice.
KeyReverb Type Description
G#6 Room
This setting adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
A6 Hall1
For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates
the natural reverberation of a small-size concert hall.
A#6 Hall2
For a truly spacious reverb sound, use the HALL 2 setting. This effect sim-
ulates the natural reverberation of a large concert hall.
B6 Stage Simulates the reverb of a stage environment.
C7 Off No effect is applied.
C7
G#6
Reverb depth range:
0 (no effect)–
20 (maximum depth)
NOTE
D3
The depth value increases as you press higher keys.
C#3: depth 20
F1: depth 0
The default reverb type (including
OFF) and depth settings are dif-
ferent for each voice.
NOTE
16
Selecting & Playing Voices
P-95 Owner’s Manual
ENGLISH
19
Transposition
The Transpose function makes it possible to shift the pitch of the entire keyboard up or down in
semitone intervals to facilitate playing in difficult key signatures, and to let you easily match the
pitch of the keyboard to the range of a singer or other instruments. For example, if you set the
transposition amount to “+5,” playing key C produces pitch F. In this way, you can play a song as
though it were in C major, and the P-95 will transpose it to the key of F.
Setting the amount of transposition
While holding down the [DEMO/SONG] and [METRONOME] buttons, press
one of the F#2–F#3 keys to set the desired amount of transposition.
To transpose the pitch down (in semitone steps)
While holding down the [DEMO/SONG] and [METRONOME] buttons, press
any key between F#2 and B2.
To transpose the pitch up (in semitone steps)
While holding down the [DEMO/SONG] and [METRONOME] buttons, press
any key between C#3 and F#3.
To restore the normal pitch
While holding down the [DEMO/SONG] and [METRONOME] buttons, press
the C3 key.
Fine tuning of the Pitch
You can fine tune the pitch of the entire instrument. This function is useful when you play this
instrument along with other instruments or CD music.
Setting the Pitch
To raise the pitch
in about 1cent steps (100 cents
= 1 semitone):
Hold down the A-1, B-1 and C0
keys simultaneously and press
any key between C3 and B3.
To lower the pitch
in about 1cent steps (100 cents
= 1 semitone):
Hold down the A-1, B-1 and C#0
keys simultaneously and press
any key between C3 and B3.
To restore standard pitch:
Hold down the A-1, B-1, C0 and
C#0 keys simultaneously and
press any key between C3 and B3.
TERMINOLOGY
Transpose:
Changing the key signature. On
the P-95, transposing shifts the
pitch of the entire keyboard.
Transposition range:
F#2 (-6 semitones)–
C3 (normal pitch)–
F#3 (+6 semitones)
NOTE
F#3F#2
0-1
-2 +1 +3-4
-3-5 +2+4+5
-6 +6
Setting range: -65–+65 cents
The default setting (0 cent) is
A3=440Hz. In the 440Hz region,
1Hz=approximately 4 cents.
Pressing the key 8 times for
example, will set A3 at approxi-
mately 442Hz.
NOTE
C1 C2 C3 B3C0A-1
B-1
C1 C2 C3 B3A-1
B-1
C#0
C1 C2 C3 B3C0A-1
B-1
C#0
17
Selecting & Playing Voices
P-95 Owner’s Manual
ENGLISH
20
Touch Sensitivity
You can adjust the volume level that changes depending on how fast or strong you hit the keys.
The following four settings are available.
Setting the Touch Sensitivity Type
While holding down the [DEMO/SONG] button and the [METRONOME] but-
ton, press one of the A6–C7 keys to select the desired touch sensitivity.
KeyTouch Sensitivity Description
A6 Fixed
All notes are produced at the same volume no matter how hard the keyboard
is played.
A#6 Soft Allows maximum loudness to be produced with relatively light key pressure.
B6 Medium Produces a fairly “standard” keyboard response.
C7 Hard Requires that the keys be played quite hard to produce maximum loudness.
The touch sensitivity settings may
have little or no effect with JAZZ
ORGAN, PIPE ORGAN and
HARPSICHORD voices that are
not normally responsive to key-
board dynamics.
Default setting: B6 (Medium)
NOTE
C7A6
18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Yamaha P-95B Manuale del proprietario

Categoria
Tastiere MIDI
Tipo
Manuale del proprietario
Questo manuale è adatto anche per