Yamaha DXR10 MKII Manuale utente

Marca: Yamaha

Modello: DXR10 MKII

Categoria: Amplificatori audio

Tipo: Manuale utente

DXRmkII series

Owner’s Manual

Bedienungsanleitung

Mode d’emploi

Manual de instrucciones

Manual do Proprietário

Manuale di istruzioni

EnglishDeutschFrançaisEspañolItaliano Português

POWERED SPEAKER SYSTEM

Руководство пользователя

⢪欽霹僈⛼

2 DXRmkII series Owner’s Manual

Explanation of Graphical Symbols

Explication des symboles

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une « tension

dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’instructions

importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

(UL60065_03)

PRÉCAUTIONS CONCERNANT LA

SÉCURITÉ

1 Lire ces instructions.

2 Conserver ces instructions.

3 Tenir compte de tous les avertissements.

4 Suivre toutes les instructions.

5 Ne pas utiliser ce produit à proximité d’eau.

6 Nettoyer uniquement avec un chiffon propre et sec.

7 Ne pas bloquer les orifices de ventilation. Installer l’appareil

conformément aux instructions du fabricant.

8 Ne pas installer l’appareil à proximité d’une source de chaleur comme

un radiateur, une bouche de chaleur, un poêle ou tout autre appareil

(y compris un amplificateur) produisant de la chaleur.

9 Ne pas modifier le système de sécurité de la fiche polarisée ou de la

fiche de terre. Une fiche polarisée dispose de deux broches dont une

est plus large que l’autre. Une fiche de terre dispose de deux broches

et d’une troisième pour le raccordement à la terre. Cette broche plus

large ou cette troisième broche est destinée à assurer la sécurité de

l’utilisateur. Si la fiche équipant l’appareil n’est pas compatible avec

les prises de courant disponibles, faire remplacer les prises par un

électricien.

10 Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas

piétinés ni coincés, en faisant tout spécialement attention aux fiches,

prises de courant et au point de sortie de l’appareil.

11 Utiliser exclusivement les fixations et accessoires spécifiés par le

fabricant.

12 Utiliser exclusivement le chariot, le stand, le trépied,

le support ou la table recommandés par le fabricant

ou vendus avec cet appareil. Si l’appareil est posé

sur un chariot, déplacer le chariot avec précaution

pour éviter tout risque de chute et de blessure.

13 Débrancher l’appareil en cas d’orage ou lorsqu’il

doit rester hors service pendant une période

prolongée.

14 Confier toute réparation à un personnel qualifié. Faire réparer

l’appareil s’il a subi tout dommage, par exemple si la fiche ou le

cordon d’alimentation est endommagé, si du liquide a coulé ou des

objets sont tombés à l’intérieur de l’appareil, si l’appareil a été exposé

à la pluie ou à de l’humidité, si l’appareil ne fonctionne pas

normalement ou est tombé.

(UL60065_03)

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ATTENTION :

POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, NE PAS RETIRER

LE CAPOT (OU LE DOS). NE CONTIENT PAS DE PIÈCES NÉCESSITANT

L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION,

FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.

ATTENTION

RISQUE DE CHOC

ELECTRIQUE-NE PAS OUVRIR

The above warning is located on the rear of the unit.

L’avertissement ci-dessus est situé sur l’arrière de l’unité.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

AVERTISSEMENT

POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE

ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À

L’HUMIDITÉ.

DXRmkII series Owner’s Manual 3

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications

not expressly approved by Yamaha may void your authority,

granted by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories

and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all

installation instructions. Failure to follow instructions could void

your FCC authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with

the requirements listed in FCC Regulations, Part 15 for Class

“B” digital devices. Compliance with these requirements pro-

vides a reasonable level of assurance that your use of this prod-

uct in a residential environment will not result in harmful

interference with other electronic devices. This equipment gen-

erates/uses radio frequencies and, if not installed and used

according to the instructions found in the users manual, may

cause interference harmful to the operation of other electronic

devices. Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If this product

is found to be the source of interference, which can be deter-

mined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected

by the interference.

Utilize power outlets that are on different branch (circuit breaker

or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change

the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type

of product. If you can not locate the appropriate retailer, please

contact Yamaha Corporation of America, Electronic Service

Division, 6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed

by Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by Yamaha Corporation of America. (class B)

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by

Yamaha Corporation of America.

COMPLIANCE INFORMATION STATEMENT

(Supplierʼs declaration of conformity procedure)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Powered Speaker System

Model Name : DXR15mkII, DXR12mkII, DXR10mkII, DXR8mkII

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including interference

that may cause undesired operation.

(FCC SDoC)

English

4 DXRmkII series Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY

BEFORE PROCEEDING

Please keep this manual in a safe place for

future reference.

This powered speaker system is designed for PA use.

Do not use for any purposes other than the one

intended. Those who are unfamiliar with handling or

those who can not handle according to this manual

such as children, should be supervised by responsible

persons to ensure safety.

WARNING

Always follow the basic precautions listed below to avoid

the possibility of serious injury or even death from

electrical shock, short-circuiting, damages, fire or other

hazards. These precautions include, but are not limited

to, the following:

If you notice any abnormality

• If any of the following problems occur, immediately turn off the

power switch and disconnect the electric plug from the outlet.

- The power cord or plug becomes frayed or damaged.

- Unusual smells or smoke are emitted.

- Some object, or water has been dropped into the product.

- There is a sudden loss of sound during use of the product.

- Cracks or other visible damage appear on the product.

Then have the product inspected or repaired by qualified

Yamaha service personnel.

Power supply/Power cord

• Do not place the power cord near heat sources such as

heaters or radiators, and do not excessively bend or otherwise

damage the cord, place heavy objects on it, or place it in a

position where anyone could walk on, trip over, or roll anything

over it.

• Only use the voltage specified as correct for the product. The

required voltage is printed on the name plate of the product.

• Use only the supplied power cord/plug.

If you intend to use the product in an area other than in the

one you purchased, the included power cord may not be

compatible. Please check with your Yamaha dealer.

• Check the electric plug periodically and remove any dirt or

dust which may have accumulated on it.

• Make sure to fully insert the electric plug to prevent electric

shocks or fire.

• When setting up the product, make sure that the AC outlet you

are using is easily accessible. If some trouble or malfunction

occurs, immediately turn off the power switch and disconnect

the plug from the outlet. Even when the power switch is turned

off, as long as the power cord is not unplugged from the wall

AC outlet, the product will not be disconnected from the

power source.

• Remove the electric plug from the outlet when the product is

not to be used for extended periods of time.

• Do not touch the product or the electric plug during an

electrical storm.

• Be sure to connect to an appropriate outlet with a protective

grounding connection. Improper grounding can result in

electrical shock, fire, or damage.

Do not open

• This product contains no user-serviceable parts. Do not

attempt to disassemble the internal parts or modify them in

any way.

Water warning/Fire warning

• Do not expose the product to rain, use it near water or in

damp or wet conditions, or place on it any containers (such as

vases, bottles or glasses) containing liquids which might spill

into any openings.

• Never insert or remove an electric plug with wet hands.

• Do not place any burning items or open flames near the

product, since they may cause a fire.

Hearing loss

• Before turning the power of all devices on or off, make sure

that all volume levels are set to the minimum. Failing to do so

may result in hearing loss, electric shock, or device damage.

• When turning on the AC power in your audio system, always

turn on the product LAST, to avoid hearing loss and speaker

damage. When turning the power off, the product should be

turned off FIRST for the same reason.

CAUTION

Always follow the basic precautions listed below to avoid

the possibility of physical injury to you or others. These

precautions include, but are not limited to, the following:

Power supply/Power cord

• When removing the electric plug from the product or an outlet,

always hold the plug itself and not the cord. Pulling by the

cord can damage it.

Location and connection

• Do not place the product in an unstable position or a location

with excessive vibration, where it might accidentally fall over

and cause injury.

• Keep the device out of reach of children. This product is not

suitable for use in locations where children are likely to be

present.

• Do not block the vents. This product has ventilation holes at

the rear to prevent the internal temperature from becoming too

high. In particular, do not place the product on its side or

upside down. Inadequate ventilation can result in overheating,

possibly causing damage to the product(s), or even fire.

• When attempting to dissipate heat on the product, when

installing it, do not use the product in a confined, poorly-

ventilated location.

Inadequate ventilation can result in overheating, possibly

causing damage to the product(s), or even fire. Make sure that

there is adequate space around the product: at least 30cm

above, 30cm at the sides and 30cm behind.

• Do not place the product in a location where it may come into

contact with corrosive gases or salt air. Doing so may result in

malfunction.

PA_en_11 1/2

English

DXRmkII series Owner’s Manual 5

• Before moving the product, remove all connected cables.

• When transporting or moving DXR15mkII, always use two or

more people. Attempting to lift the product by yourself may

damage your back, result in other injury, or cause damage to

the product itself.

• Do not use the speaker’s handles for suspended installation.

Doing so can result in damage or injury.

• Do not hold the bottom of the product when transporting or

moving it. In doing so, you may pinch your hands under the

product, and result in injury.

• Do not press the rear panel of the product against the wall.

Doing so may cause the plug to come in contact with the wall

and detach from the power cord, resulting in short circuiting,

malfunction, or even fire.

• Always consult qualified Yamaha service personnel if the

product installation requires construction work.

Improper installation might cause accidents, injuries, damage

or malfunction of this product.

Maintenance

• Remove the power plug from the AC outlet when cleaning the

product.

Handling caution

• Do not rest your weight on the product or place heavy objects

on it.

• Do not operate the product if the sound is distorting.

Prolonged use in this condition could cause overheating and

result in fire.

NOTICE

To avoid the possibility of malfunction/ damage to the product, or

damage to other property, follow the notices below.

Handling and maintenance

• Do not use the product in the vicinity of a TV, radio, or other

electric products. Otherwise, the product, TV, or radio may

generate noise.

• Do not expose the product to excessive dust or vibration, or

extreme cold or heat, in order to prevent the possibility of

panel disfiguration, unstable operation, or damage to the

internal components.

• Do not install in locations where temperature changes are

severe. Otherwise, condensation may form on the inside or

the surface of the product, causing it to break.

• If there is reason to believe that condensation might have

occurred, leave the product for several hours without turning

on the power until the condensation has completely dried out,

in order to prevent possible damage.

• Do not place vinyl, plastic or rubber objects on the product,

since this might cause alteration or discoloration of the panel.

• When cleaning the product, use a dry and soft cloth. Do not

use paint thinners, solvents, cleaning fluids, or chemical-

impregnated wiping cloths, since this might cause alteration

or discoloration.

Information

About functions/data bundled with the product

• XLR-type connectors are wired as follows (IEC60268

standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).

About this manual

• The illustrations as shown in this manual are for instructional

purposes only.

• The company names and product names in this manual are

the trademarks or registered trademarks of their respective

companies.

About disposal

• This product contains recyclable components.

When disposing of this product, please contact the

appropriate local authorities.

Yamaha cannot be held responsible for damage caused by

improper use or modifications to the product.

PA_en_11 2/2

6 DXRmkII series Owner’s Manual

Introduction

English

Introduction

Thank you for purchasing the Yamaha DXRmkII series powered speaker system.

Please read this manual thoroughly to ensure optimum use of the DXRmkII series for the longest possible period of time. Keep

the manual in a safe place for future reference.

*The subwoofer used in combination with the DXRmkII series (as shown in this manual) is assumed to be the DXS series (DXS18, DXS15mkII,

or DXS12mkII).

Contents

Introduction............................................................................. 6

Main Features of the DXRmkII Series ................................... 6

Controls and Functions .......................................................... 7

Setup Examples ................................................................... 10

Troubleshooting.................................................................... 12

References ........................................................................... 98

Main Features of the DXRmkII Series

 FIR-X tuning™

Our proprietary sound-processing technology utilizing a

linear-phase FIR filter delivers excellent sound quality at high

resolution with a smooth frequency response that is

unaffected by phase interference near the crossover point.

 D-CONTOUR (Dynamic CONTOUR)

D-CONTOUR is a multiband compressor that dynamically

controls the level of each frequency range according to the

application and human hearing characteristics. It features a

FOH/MAIN mode for using your DXRmkII as a main speaker,

and a MONITOR mode that has been optimized for use as a

floor monitor. Select the mode that suits your application.

 Mixing/LINK functionality

The DXRmkII series features mixing functionality, enabling

you to mix sounds by directly inputting three channel signals

into the unit.

In addition, the LINK function enables you to easily configure

a stereo or dual-mono SR (Sound Reinforcement) system

using two DXRmkIIs.

 DSP-controlled advanced protection

system

Powerful protection circuits ensure secure protection in the

speaker unit, amplifier unit, and power supply unit. This

protection functionality promotes optimal performance of

each component and optimum reliability without distortion

even in challenging environments.

Included Accessories

• AC power cord

• Owner’s Manual (this book)

Optional Accessories (sold

separately)

DXR8mkIIDXR10mkIIDXR12mkIIDXR15mkII

U-bracket Cover

DXR15mkII UB-DXR15 SPCVR-1501

DXR12mkII UB-DXR12 SPCVR-1201

DXR10mkII UB-DXR10 SPCVR-1001

DXR8mkII UB-DXR8 SPCVR-0801

DXRmkII series Owner’s Manual 7

Controls and Functions

English

Controls and Functions

Rear panel

INPUT jacks

These comprise a balanced XLR input jack (INPUT 1),

unbalanced phones (INPUT 2) and RCA pin input jacks

(INPUT 3).

You can connect a mixing console or microphone to

INPUT 1, a keyboard or electric-acoustic guitar to INPUT 2,

and a portable audio player or CD player to INPUT 3. Signals

from INPUT 1-3 are mixed inside the DXRmkII unit.

THRU jack

This is a balanced XLR output jack. The INPUT 1 signal is

passed through unaffected, since this is parallel-connected

to the INPUT 1 (XLR) jack.

LEVEL controls

For adjusting the level of each INPUT signal. If you connect a

device that features a nominal output level of +4dBu (such as

a mixing console), set the MIC/LINE switch () on the

DXRmkII series to LINE, and adjust the LEVEL control using

its 12 o’clock position as a reference.

LIMIT indicator

Lights when the output limiter is active. The output limiter will

operate in order to protect the speaker and amp, attenuating

the output signal to the amplifier. If this indicator stays lit,

lower the level of the input signal.

NOTE

• If the output voltage of the amplifier has exceeded the maximum

value, or if excessive integral power consumption is detected, the

output limiter attenuates the output signal to the amplifier. The

LIMIT indicator will light when the amount of attenuation is 3dB or

higher.

• The integral power consumption refers to the sum of power

consumption provided to the speaker driver per unit time.

SIGNAL indicator

Lights when an audio input signal is detected.

PROTECTION indicator

Lights when the protection system is active. The protection

system will operate and the speaker output will be muted in

the following situations.

• If amplifier overheating is detected:

• If DC output is detected:

• If overcurrent is detected:

•When turning the power on:

The protection system will be activated to prevent noise

and the indicator will light for about two seconds. The

indicator turns off when the power supply has started

normally.

•When turning the power off:

Or if the power turns off due to an unexpected error, the

protection system will be activated to prevent noise, and

then the power will be shut down.

NOTE

If the protection system has engaged after the problem was

detected, waiting until the amplifier cools down or powering off and

on again will return to normal operation. If the unit does not return to

normal operation, please contact your Yamaha dealer.

POWER indicator

Lights when the power switch () is set to on.

FRONT LED DISABLE switch

Selects turning on or off the FRONT LED at the left of the

unit’s front grille. The LED will light when this switch is set to

off

() . Turn this switch on ( ) when you want to turn off the

LED.

NOTE

The LED will light brighter than usual if the attenuation of the output

limiter is 3dB or higher.

MIC/LINE switch

Set this switch to MIC or LINE for INPUT 1 jack, depending

on the level of the input signal. For low-level signals (such as

microphones), set the switch to the MIC position. For high

level signals (such as mixer), set the switch to the LINE

position.

8 DXRmkII series Owner’s Manual

Controls and Functions

English

D-CONTOUR switch

Selects one of the D-CONTOUR (Dynamic CONTOUR)

presets. The FOH/MAIN setting will boost the high and low

frequency components so that the frequency response will

become suitable for a main speaker. The MONITOR setting

also suppresses the low range, which could otherwise tend

to be boomy if the speaker is set directly on the floor or used

along with a main speaker. With the FOH/MAIN or MONITOR

setting, the D-CONTOUR function is enabled and controls

the boost and attenuation amounts dynamically in relation to

the sound volume. When this switch is set to OFF, a generic

frequency response setting will be used and the

D-CONTOUR function will be turned off.

HPF switch

Specifies the HPF’s cut-off frequency.

If the switch is set to 120Hz or 100Hz, the high-pass filter will

cut the frequency components below that threshold. If you

plan to use your DXRmkII without a subwoofer, set this switch

to OFF. If you plan to use the DXRmkII along with a

subwoofer, we recommend that you set this switch to 120Hz

or 100Hz.

LINK OUT jack

This XLR jack outputs signals (routed from each INPUT jack)

to a connected DXRmkII series speaker. Connect this jack to

the INPUT 1 (XLR) jack on the linked DXRmkII series

speaker. Signals at the LINK OUT jack are line-level. Set the

MIC/LINE switch on the linked DXRmkII series speaker to

LINE. For stereo signals, set the LEVEL control on the linked

DXRmkII to the 12 o’clock position to balance the levels

between two DXRmkIIs.

LINK MODE switch

Enables you to select whether the mixed signal (on the

original DXRmkII) will be played in stereo or monaural on the

original and linked DXRmkIIs. The following signals are

mixed and output according to the switch setting.

NOTE

If you use only a single, stand-alone DXRmkII, set this switch to

MONO (). If you set the switch to STEREO ( ), audio signals input

at the R channel of INPUT 2/3 will not be output.

AC IN inlet

Connect the supplied AC power cord here. First, connect the

power cord to the device, then insert the power cord plug

into the AC outlet.

Power switch

Turns the power supply on or off.

Press the switch to turn the power on ( ).

NOTE

• If you are using multiple devices, turn on the power to each device

individually. If you turn on the power to multiple devices

simultaneously, a temporary drop in the power voltage may occur,

possibly resulting in abnormal operation of the devices.

• Rapidly turning the unit on and off in succession can cause it to

malfunction. After turning the unit off, wait for about 5 seconds

before turning it on again.

LINK MODE STEREO MONO

Input of the

original DXRmkII

INPUT1

INPUT2/3

INPUT1

INPUT2/3

LR LR

Output of the

original DXRmkII



–



Output of the

linked DXRmkII



–



Use only the supplied power cord/plug.

Be sure to turn the power off before

connecting or disconnecting the power

cord.

WARNING

CAUTION

DXRmkII series Owner’s Manual 9

Controls and Functions

English

Tiltable pole socket

This mount has two pole sockets. You can choose the angle

of the DXRmkII (mounted on a speaker pole) so that the

speaker will be horizontal to the floor or tilting toward the floor

by 7 degrees.

Suspended installation

If you plan to suspend your DXRmkII series speaker,

attach commercially-available eye bolts to the screw

holes (which are sealed at the time of shipment) located

on the top (two locations) and on the lower part of the

rear (one location).

The size of the screw holes on the DXR15mkII and

DXR12mkII is M10 (for an eye bolt length of 18mm or

less). The size of the screw holes on the DXR10mkII and

DXR8mkII is M8 (for an eye bolt length of 15mm or less).

Keep in mind that you will need three eye bolts to

suspend it. Make sure to use the eye bolts according to

the standards and safety regulations in your area.

Before doing any installation or

construction work, consult with an

installation expert.

When choosing the installation location,

suspension wire and mounting hardware,

make sure all are strong enough to support

the weight of the speaker.

Some fittings may deteriorate over

extended periods of time due to wear and/

or corrosion. For optimum safety, the

installation should be checked thoroughly

at regular intervals.

7˚

0˚

7˚

CAUTION

Yamaha cannot be held responsible for damage or

injury caused by insufficient strength of the

support structure or improper installation.

10 DXRmkII series Owner’s Manual

Setup Examples

English

Setup Examples

1. Basic SR system

This example illustrates a basic SR system setup using two 2-way speakers. The system is suitable for a small-sized live

space, a restaurant and a practice studio. As necessary, add a stage monitor system illustrated in no. 3.

2. SR system with subwoofer

This example illustrates an SR system setup using two 2-way speakers and subwoofers with speaker poles. The system is

suitable for a small-sized music venue, a house of worship and an event site. We recommend that the subwoofer’s input level

is set to 0dB (set the LEVEL control to a 12 o’clock position when using the DXS series). If you prefer, you can adjust the level

as desired. As necessary, add a stage monitor system illustrated in no. 3.

NOTE

If you use multiple subwoofers at the same time, set the polarity (POLARITY switch when using the DXS series) of adjacent subwoofers to the

same position. Otherwise, the sounds from each speaker may cancel each other, resulting in diminished sound pressure.

For more information about the settings on the DXS

series, refer to the Owner’s Manual for DXS18,

DXS15mkII and DXS12mkII (combined).

DXRmkII series Owner’s Manual 11

Setup Examples

English

3. Stage monitor system

This SR system is suitable as a performer’s monitoring system. For use as a vocal monitor, set D-CONTOUR to MONITOR.

As necessary, connect speakers in parallel.

NOTE

Up to four speakers can be connected in parallel.

4. SR system with a single DXRmkII

This example illustrates an SR system using one 2-way speaker connected directly to a microphone, musical instrument, or

playback source. This system can be used in a wide range of places such as corporate events, presentations, and

restaurants. Adjust the volume with the LEVEL control to prevent feedback.

5. Simple SR system with two DXRmkIIs

This example illustrates a simple SR system using two 2-way speakers linked to each other. This system is suitable for a small-

sized live venue. Audio can be output in stereo or monaural, by using one 2-way speaker connected directly to a microphone,

musical instrument, or BGM sound source, then linking the speaker to another 2-way speaker via the LINK OUT jack. If you

want to output in stereo, set the LINK MODE switch to the STEREO position.

MONO

STEREO

12 DXRmkII series Owner’s Manual

Troubleshooting

English

Troubleshooting

*If any specific problem should persist, however, please contact your Yamaha dealer.

Symptom Possible causes Possible solution

Power does not turn on.

The power cord is not connected

properly.

Connect the power cord properly.

Power suddenly went off.

The protection system has operated,

shutting down the power supply.

Turn off the power, wait until the amplifier cools down,

and then turn on again.

No sound.

The cable is not connected properly. Connect to the INPUT jack properly.

The LINK MODE switch is set

incorrectly.

If you are using a single DXRmkII, set the LINK MODE

switch to MONO.

Sound is interrupted

suddenly.

The protection system has operated,

muting the output.

Wait until the amplifier cools down. If the device won’t

automatically reset itself, turn off the power, and then

on again.

Sound howls (feedback).

A microphone is directed toward the

speaker.

Keep the speaker away from the area where the

microphone picks up sound.

Sound is amplified too much.

Lower the volume of the input device and locate the

microphone more closely to the sound source.

The setting of the HPF switch is not

appropriate.

Set the HPF switch on 120Hz or 100Hz if you get

feedback in low frequency bands.

Each speaker sound

differs (if multiple

speakers are used).

Settings for each speaker differ.

Set the HPF and D-CONTOUR switches of each

speaker to the same positions.

Sound is distorted.

Input volume is excessive.

• Lower the volume of the input device to a point no

higher than where the LIMIT indicator lights

occasionally.

• If sound continues to be distorted even if you turn

down the volume to the minimum, set the MIC/LINE

switch to the LINE position (if the switch is set to

MIC).

Output volume is excessive.

Use the LEVEL control to lower the output level to a

point no higher than where the LIMIT indicator lights

occasionally.

The microphone volume is

too low.

The MIC/LINE switch is set to LINE. Set the MIC/LINE switch to the MIC position.

Low and high frequency

are unbalanced.

The output limiter is active.

Lower the input level or the output level to a point no

higher than where the LIMIT indicator lights

occasionally.

DXRmkII series Owner’s Manual 13

English

(weee_eu_en_02)

Information for users on collection and disposal of old equipment:

This symbol on the products, packaging, and/or accompanying documents means that

used electrical and electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to

applicable collection points, in accordance with your national legislation.

By disposing of these products correctly, you will help to save valuable resources and

prevent any potential negative effects on human health and the environment which could

otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your

local municipality, your waste disposal service or the point of sale where you purchased

the items.

For business users in the European Union:

If you wish to discard electrical and electronic equipment, please contact your dealer or

supplier for further information.

Information on Disposal in other Countries outside the European Union:

This symbol is only valid in the European Union. If you wish to discard these items, please

contact your local authorities or dealer and ask for the correct method of disposal.

Português

DXRmkII series Owner’s Manual

References

Italiano

Español

Français

Deutsch

English

References

Specifications

General DXR15mkII DXR12mkII DXR10mkII DXR8mkII

System Type 2-way, Bi-amped Powered Speaker, Bass-reflex Type

Frequency Range (-10dB) 49Hz – 20kHz 52Hz – 20kHz 56Hz – 20kHz 57Hz – 20kHz

Coverage Angle H90° x V60° Constant Directivity Horn

Crossover Type FIR-X tuning

™ (Linear Phase FIR Filter)

Crossover Frequency 2.1kHz 2.1kHz 2.3kHz 2.4kHz

Measured Maximum SPL (peak)

Pink noise@1m

134dB SPL

132dB SPL 130dB SPL

Transducer DXR15mkII DXR12mkII DXR10mkII DXR8mkII

LF Diameter 15" Cone 12" Cone 10" Cone 8" Cone

Voice coil 2.5" 2.5" 2" 2"

Magnet Ferrite

Voice coil 1.75"

Diaphragm PET

Type 1" Throat Compression Driver

Magnet Neodymium

Enclosure DXR15mkII DXR12mkII DXR10mkII DXR8mkII

Material, Finish, Color ABS, Matte black

Floor Monitor Angle 50° Symmetrical 50° Symmetrical 50° –

Dimensions (WxHxD, with rubber feet) 445×700×380 mm 362×601×350 mm 305×502×310 mm 280×458×280 mm

Net Weight 21.8kg 18.6kg 13.9kg 12.8kg

Handles Aluminium die-cast (Side x 2) Aluminium die-cast (Top x 1)

Pole Socket 35 mm x 2 (0° or -7°)

Rigging Points Top x 2, Rear x 1

(Fits for M10 x 18mm eyebolts)

Top x 2, Rear x 1

(Fits for M8 x 15mm eyebolts)

Optional Accessories U-bracket UB-DXR15 UB-DXR12 UB-DXR10 UB-DXR8

Cover SPCVR-1501 SPCVR-1201 SPCVR-1001 SPCVR-0801

Amplifier DXR15mkII DXR12mkII DXR10mkII DXR8mkII

Amplifier Type Class-D

Power Rating

Dynamic 1100W (LF: 950W, HF: 150W)

Continuous 700W (LF: 600W, HF: 100W)

Cooling Fan cooling, 4 speeds

AD/DA 24bit 48kHz sampling

Signal Processing 48bit (Accumulator: 76bit)

HPF/LPF OFF, 100, 120Hz 24dB/oct HPF

DSP Preset D-CONTOUR: FOH/MAIN, MONITOR, OFF

Connectors Input INPUT1: XLR3-31 type x 1, INPUT2: Phone x 2 (Unbalanced), INPUT3: RCA PIN x 2 (Unbalanced)

Output THRU: XLR3-32 type x 1 (Parallel with INPUT1), LINK OUT: XLR3-32 type x 1

Input Impedance INPUT1 LINE: 12kΩ, MIC: 8kΩ

INPUT2, 3 L, R: 40kΩ, MONO: 20kΩ

Input Sensitivity

(LEVEL: Maximum)

INPUT1 LINE: +1dBu, MIC: -32dBu

INPUT2, 3 -13dBu

Input Sensitivity

(LEVEL: Center)

INPUT1 LINE: +11dBu, MIC: -22dBu

INPUT2, 3 -3dBu

Português

DXRmkII series Owner’s Manual

References

Italiano

Español

Français

Deutsch

English

0dBu is referenced to 0.775Vrms.

*1 Power rating (120V, 25°C). This is total value of individual output power.

The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the

manual file.

Der Inhalt dieser Bedienungsanleitung gilt für die neuesten technischen Daten zum Zeitpunkt der Veröffentlichung. Um die neueste Version der Anleitung zu erhalten,

rufen Sie die Website von Yamaha auf und laden Sie dann die Datei mit der Bedienungsanleitung herunter.

Le contenu de ce mode d’emploi s’applique aux dernières caractéristiques techniques connues à la date de publication du manuel. Pour obtenir la version la plus

récente du manuel, accédez au site Web de Yamaha puis téléchargez le fichier du manuel concerné.

El contenido de este manual se aplica a las últimas especificaciones según la fecha de publicación. Para obtener el último manual, acceda al sitio web de Yamaha y

descargue el archivo del manual.

O conteúdo deste manual se aplica às especificações mais recentes a partir da data de publicação. Para obter o manual mais recente, acesse o site da Yamaha e

faça o download do arquivo do manual.

Il contenuto del presente manuale si applica alle ultime specifiche tecniche a partire dalla data di pubblicazione. Per ottenere la versione più recente del manuale,

accedere al sito Web Yamaha e scaricare il file corrispondente.

В содержании данного руководства приведены последние на момент публикации технические характеристики. Для получения последней версии

руководства посетите веб-сайт корпорации Yamaha и загрузите файл с руководством.

Maximum

Input Level

INPUT1 LINE: +24dBu, MIC: +20dBu

INPUT2, 3 +16dBu

Controls LEVEL x 3, LINE/MIC, HPF, D-CONTOUR, FRONT LED DISABLE, LINK MODE, POWER

Idle Power Consumption 35W

1/8 Power Consumption 110W 90W

Power Requirements 100V – 240V, 50Hz/60Hz

Amplifier DXR15mkII DXR12mkII DXR10mkII DXR8mkII