Cartoni C20S Manuale utente

Categoria
Treppiedi
Tipo
Manuale utente

Questo manuale è adatto anche per

PROFESSIONAL CAMERA SUPPORT
USER’S MANUAL
& Maintenance
2 3
Index
1.
Safety & Set-Up IntrodUctIon 4
2.
operatIng elementS 6
3.
procedUreS 8
4.
SpecIfIcatIonS 9
5.
maIntenance 10
6.
Warranty 10
7.
acceSSorIeS & prodUct lIne 11
IT IS HEREBY CERTIFIED THAT THE QUALITY MANAGEMENT SYSTEM OF
IAF:17
IAF:29
19714/09/S
CARTONI S.P.A.
VIA DI PORTONACCIO, 33/B 00159 ROMA (RM) ITALIA
VIA DI PORTONACCIO, 33/B 00159 ROMA (RM) ITALIA
DESIGN, MANUFACTURE AND POST-SALE ASSISTANCE OF PROFESSIONAL BROADCAST AND FILM EQUIPMENT.
MARKETING OF PROFESSIONAL BROADCAST AND FILM ACCESSORIES AND PRODUCTS AS LOCAL
AGENCY/REPRESENTATIVE
PROGETTAZIONE, FABBRICAZIONE ED ASSISTENZA POST-VENDITA DI PRODOTTI PER LA CINEMATOGRAFIA E LA
TELEVISIONE PROFESSIONALE. COMMERCIALIZZAZIONE DI PRODOTTI ED ACCESSORI IN CONCESSIONE PER LA
CINEMATOGRAFIA E LA TELEVISIONE PROFESSIONALE
Per informazioni sulla validità
del certificato, visitare il sito
www.rina.org
For information concerning
validity of the certificate, you
can visit the site
www.rina.org
CCEERRTTIIFFIICCAATTEE NNoo..
CERTIFICATO N.
SI CERTIFICA CHE IL SISTEMA DI GESTIONE PER LA QUALITÀ DI
PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES
NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIONAL UNITS
L'uso e la validità del presente certificato sono soggetti al rispetto del documento RINA: Regolamento per la Certificazione di Sistemi di Gestione per la Qualità
La validità del presente certificato è subordinata a sorveglianza periodica annuale / semestrale ed al riesame completo del sistema di gestione con periodicità triennale
The validity of this certificate is dependent on an annual / six monthly audit and on a complete review, every three years, of the management system
È CONFORME ALLA NORMA / IS IN COMPLIANCE WITH THE STANDARD
Per i requisiti della norma non
applicabili al campo di applicazione
del sistema di gestione
dell'organizzazione, riferirsi alle
informazioni documentate relative.
Reference is to be made to the
relevant documented information
for the requirements of the
standard that cannot be applied to
the Organization's management
system scope
The use and validity of this certificate are subject to compliance with the RINA document : Rules for the certification of Quality Management Systems
12.06.2009
24.05.2021
CISQ è la Federazione Italiana di Organismi di
Certificazione dei sistemi di gestione aziendale
CISQ is the Italian Federation of
management system Certification Bodies
Prima emissione
First Issue
Data revisione
Revision date
RINA Services S.p.A.
Data scadenza
Expiry Date 02.06.2024
Via Corsica 12 - 16128 Genova Italy
Data decisione di rinnovo
Renewal decision date 24.05.2021
Amilcare Rini
Rome Management System
Certification, Head
Membro degli Accordi di Mutuo
Riconoscimento EA, IAF e ILAC
Signatory of EA, IAF and ILAC
Mutual Recognition Agreements
SGQ N° 002 A
CARTONI ®
All rights reserved ©
4 5
Before using the product read this user manual.
Before installing the Fluid Head on the Tripod check the Tripod
stability.
Verify that the Camera payload (including lenses and accesso-
ries) is lower than the maximum capacity of the Fluid Head.
Before installing the Camera make sure that the Fluid Head is in
good condions and bares no evident damages.
Verify that the Camera payload (including lenses and accesso-
ries) is lower than the maximum capacity of the Fluid Head.
Do not aach heavy items to the Pan bars.
The Pan and Tilt locks should be applied whenever the Camera
is le unaended on the Fluid Head & Tripod.
Always remove the Camera from the Fluid Head before trans-
porng.
1. Safety & Set-Up IntrodUctIon
Thank you for choosing CARTONI.
The C20 S is a heavy-duty acon Fluid Head with a broad range of pay-
loads from 7 kg (15 lbs) to 35 kg (77 lbs) specically designed to provide an
extremely stable support for standard EFP, Studio/Broadcast or Film con-
guraons.
Rugged but easy to operate this Fluid Head has all the ergonomic set-
ngs at the right place. The C20 S features 3 award winning uid damping
modules assuring outstanding drag levels and extraordinary smoothness in
both pan and lt modes.
Movements can be selected with 7 precisely repeatable steps of drag,
while free-wheeling is available by simply seng the drag selector ring into
posion "0". Counterbalance is acvated by an easy grip selector in 7 pro-
gressive steps and "0".
Posive locks, wide range sliding plaorm incorporang the European
style quick release plate, a switchable illuminated spirit level completes the
operang specs.
The C20S weighs 6.5 kg (14.3 lbs) thanks to the extensive use of ex-
tremely lightweight magnesium alloys.
It interfaces with all 100 mm bowl base tripods and in the oponal C20
S/150mm version, it interfaces with all 150 mm bowl base Tripods and with
Pedestals through the standard Vinten 4 bolts.
B
6 7
1
Camera plate release lever
2
Sliding camera plaorm
3
Camera plate
4
Sliding camera plaorm lock
5
Pan bar
6
Pan bar extension
7
Pan bar aachment
11
Tilt lock
12
Pan selector
13
Baery housing
14
Spirit level buon
15
Illuminated spirit level
16
Removable e down sha
17
Tie down knob
❶ ❷
2. operatIng elementS
8
Tilt angle ON/OFF selector
9
Counterbalance selector
10
Pan lock
8 9
3. procedUreS
Place the C20 S on your Tripod by loosening the e-down knob
under the Fluid Head and level using the illuminated spirit level .
In low light condions, press buon for light.
Connect one or two Pan bars to the Fluid Head ghtening the
lever on the Pan bar aachment and select your desired operang
angle. The telescopic Pan bar length can be adjusted via lever .
Insert Pan and Tilt locks and check the sliding Camera plat-
form lock lever . Set horizontal lock in posion “On”.
Open the Camera plate release lever completely to release the
Camera plate .
Remove the Camera plate from the sliding Camera plaorm
by squeezing simultaneously Camera plate release lever and the
safety lever . Aach the Camera plate to the boom of the
Camera and ghten the clamping screw to secure the Camera.
Lock the sliding plaorm lever , click the Camera into the quick
release sliding plaorm , the plate will lock into place.
Hold the Camera in horizontal posion with the Pan bar and re-
lease the Tilt brake lever . Release the sliding plaorm lever
and nd the correct center of gravity (CG) posion, by sliding the
Camera plaorm back and forth unl you have achieved the cor-
rect balance. Fasten the sliding plaorm lock .
Set the Counterbalance system by turning the selector clockwise
to appropriate tension. The Camera must stay at any Tilt angle. Even-
tually, ne-tune by adjusng the sliding plate .
Unlock the Pan lock lever and set the Fluid drag control by adjust-
ing Pan selector .
Set posion “ONon the Tilt angle increase selector for a +/- 65°
Tilt angle. In case an extra is needed, set the selector on “OFF” po-
sion, keeping in mind you are now working on the springs limit angle.
When the illuminated spirit level fails it is me to replace the 9
volts baery . Remove the baery cover.
The above set-up instrucons are for the achievement of precise pan,
lt and diagonal movements. To get opmum results from your C20 S
the equipment set up is very important.
Minimum payload 7 Kg 15 lbs
Maximum payload 35 Kg 77 lbs
Weight 6,5 Kg 14.3 lbs
Bowl diameter 100 mm & 150mm oponal
Fluid control 7 steps + 0
Counterbalance 7 steps + 0
Pan range 360°
Tilt range +/- 65°
Temperature range -40 / +60 °C -40 / +140 °F
4. SpecIfIcatIonS
10 11
5. maIntenance
6. Warranty
With indoor use - when needed - just clean the C20 S and Tripod with a
so cloth. Dirt accumulated during storage may be removed using a brush
or Air spray.
CARTONI products main mechanisms are sealed as they are also built
for professional outdoor use.
However, use under rough condions will require special care. Salt water
is very corrosive and can cause extreme damages. In atempt to avoid fur-
ther damage the Fluid Head should be washed o with fresh water at the
earliest opportunity and dried before storage.
Sand and dirt are abrasive and should be removed using a semi-s
brush or Air spray.
Disconnect the illuminated spirit level baery during long term storage.
All CARTONI Fluid Heads & Pedestals have a free of charge three (3)
year warranty. Register your product at www.cartoni.com within 30 days
from date of rst purchase/invoice to receive further two (2) year warranty
for the unsurpassed free ve (5) year warranty.
Tripods, spreaders, dollies and all accessories are guaranteed one (1)
year from the date of rst purchase/invoice.
CARTONI warrant that the product supplied will - under proper use -
be free from defects in workmanship and materials and agrees that it will,
at its opon, either repair or replace any defecve part within duraon of
warranty from date of rst purchase with no labour charge.
This warranty does not apply to any CARTONI product that has been
damaged in shipping or handling, abused, misused, operated contrary to
instrucons for use, neglected, normal wear or tear, modied or changed in
design or construcon or serviced by unauthorized pares.
Repairs or misuse by any unauthorized pares will void this warranty.
Warranty claims must be submied in wring - to the factory for verica-
on or to an authorized distributor/dealer designated by CARTONI.
It is the end user’s responsibility when ordering to ensure that the prod-
ucts ordered conform to his requirements.
All freight of product to CARTONI must be prepaid. All implied war-
ranes are limited to the me period set forth herein & subject to change
without noce.
No liability can be accepted for any variaon.
For the complete Accessories list & Product line please visit CARTONI’s
ocial website www.cartoni.com.
Every product has an updated list of compable items sorted by groups,
with descripons and technical data.
7. acceSSorIeS & prodUct lIne
CARTONI S.p.A
Via di Portonaccio, 33/B - 00159 Rome (Italy)
Phone +39 06 4382002
Fax +39 06 43588293
www.cartoni.com
PROFESSIONAL CAMERA SUPPORT
Manual Version: 1.0 - Issue date: September 2021
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Cartoni C20S Manuale utente

Categoria
Treppiedi
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue