PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
*Please keep these precautions in a safe place for future reference.
」
* Do not open the instrument or attempt to
disassemble the internal parts or modify them in any
way. The instrument contains no user-serviceable
parts. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by
qualified service personnel.
* Do not expose the instrument to rain, use near water
or in damp or wet conditions, or place containers on it
containing liquids that might spill into any opening.
* If the power cord or plug becomes frayed or
damaged, or if there is a sudden loss of sound during
use of the instrument, or if any unusual smells or
smoke appear to be caused by it, immediately turn off
the power, disconnect the power plug from the outlet, and
have the instrument inspected by qualified service
personnel.
Do not use a voltage other than the indicated power
supply voltage. Use of a voltage other than indicated may
cause fire or electrical shock.
*
* Before cleaning the instrument, always remove the
power plug from the outlet. Never insert or remove an
power plug with wet hands.
* Check the power plug periodically and remove any dirt
or dust, which may have accumulated on it.
WARNING
Always follow the basic precaution listed below to avoid the possibility of serious injury or even death from
electronic shock, short-circuiting, fire or other hazards. These precautions include, but are not limited to,
the followings:
CAUTION
Always follow the basic precaution listed below to avoid the possibility of physical injury or damage to the
instrument or other property. These precautions include, but are not limited to, the followings:
」
* Do not place the power cord near heat sources such
as heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it,
or place it in a position where anyone could walk on,
trip on, or roll anything over it.
* Do not connect the instrument to an electrical outlet
using a multiple-connector. Doing so can result in
lower sound quality, or possibly cause overheating in
the outlet.
* Unplug the power cords when not using the
instrument, or during electrical storms.
* When removing the power plug from the instrument
or an outlet, always hold the plug itself but not the cord.
* Do not expose the instrument to excessive dust or
vibrations, or extreme cold or heat, (such as direct
sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration or
damage to the internal components.
* Before moving the instrument, remove all connected
power cords and other cables.
* When cleaning the instrument, use a soft, dry cloth.
Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths. Do not place
vinyl, plastic or rubber objects on the instrument, since
* Before connecting the instrument to other electronic
components, turn off the power for all components.
Before turning the power on or off for all components, set
all volume levels to minimum. Also, be sure to set the
volume of all components at their minimum levels and
gradually raise the volume controls while playing the
instrument to set the desired listening level.
* Do not use the instrument near other electrical products
such as televisions, radios, or speakers, since this might
cause interference which can affect proper operation of
other products.
* Do not place the instrument in an unstable position
where it might accidentally fall over.
* Do not rest your weight on, or place heavy objects on
the instrument, and do not use excessive force on the
buttons, switches and connectors.
* Do not operate the instrument for a long period of time
at a high or uncomfortable volume level, since this can
cause permanent hearing loss. If you experience and
hearing loss or ringing in the ears, consult a physician.
WE CANNOT BE HELD RESPONSIBLE FOR DAMAGE
BY IMPROPER USE OR MODIFICATIONS TO THE
INSTRUMENT, OR DATA THAT IS LOST OR
DESTROYED.
this might discolour the panel or keyboard.