Yamaha CP40 Stage Manuale del proprietario

Categoria
Attrezzatura musicale
Tipo
Manuale del proprietario

Questo manuale è adatto anche per

EN
Owners Manual
STAGE PIANO
2 CP4 STAGE/CP40 STAGE Owner’s Manual
SPECIAL MESSAGE SECTION (for CP4 STAGE)
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these graph-
ics on the enclosure. The explanation of these graphics
appears on this page. Please observe all cautions indicated
on this page and those indicated in the safety instruction sec-
tion.
The exclamation point within the equi-
lateral triangle is intended to alert the
user to the presence of important operat-
ing and maintenance (servicing) instruc-
tions in the literature accompanying the
product.
The lightning flash with arrowhead sym-
bol, within the equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is prop-
erly installed and used in its normal and customary manner,
all foreseeable risks have been eliminated. DO NOT modify
this unit or commission others to do so unless specifically
authorized by Yamaha. Product performance and/or safety
standards may be diminished. Claims filed under the
expressed warranty may be denied if the unit is/has been
modified. Implied warranties may also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The infor-
mation contained in this manual is believed to be correct at
the time of printing. However, Yamaha reserves the right to
change or modify any of the specifications without notice or
obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to produce
products that are both user safe and environmentally
friendly. We sincerely believe that our products and the pro-
duction methods used to produce them, meet these goals. In
keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice: This product MAY contain a small non-
rechargeable battery which (if applicable) is soldered in
place. The average life span of this type of battery is approx-
imately five years. When replacement becomes necessary,
contact a qualified service representative to perform the
replacement.
Warning: Do not attempt to recharge, disassemble, or
incinerate this type of battery. Keep all batteries away from
children. Dispose of used batteries promptly and as regu-
lated by applicable laws. Note: In some areas, the servicer is
required by law to return the defective parts. However, you
do have the option of having the servicer dispose of these
parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is consid-
ered to be at an end, please observe all local, state, and fed-
eral regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the manu-
facturers warranty, and are therefore the owners responsi-
bility. Please study this manual carefully and consult your
dealer before requesting service.
NAME PLATE LOCATION: The graphic below indicates
the location of the name plate. The model number, serial
number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this
manual as a permanent record of your purchase.
Model
Serial No.
Purchase Date
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
92-469- 1 (rear)
CP4 STAGE/CP40 STAGE Owner’s Manual 3
SPECIAL MESSAGE SECTION (for CP40 STAGE)
This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Yamaha.
WARNING:
Do not place this product in a position where anyone
could walk on, trip over, or roll anything over power or connecting cords
of any kind. The use of an extension cord is not recommended! If you
must use an extension cord, the minimum wire size for a 25’ cord (or
less) is 18 AWG. NOTE: The smaller the AWG number, the larger the
current handling capacity. For longer extension cords, consult a local
electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at the
time of printing. However, Yamaha reserves the right to change or mod-
ify any of the specifications without notice or obligation to update exist-
ing units.
This product, either alone or in combination with an amplifier and head-
phones or speaker/s, may be capable of producing sound levels that
could cause permanent hearing loss. DO NOT operate for long periods
of time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult
an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and/or accessory mounting
fixtures that are either supplied with the product or as optional accesso-
ries. Some of these items are designed to be dealer assembled or
installed. Please make sure that benches are stable and any optional
fixtures (where applicable) are well secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are not
covered by the manufacturer’s warranty, and are therefore the owners
responsibility. Please study this manual carefully and consult your
dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be
aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of
battery is approximately five years. When replacement becomes nec-
essary, contact a qualified service representative to perform the
replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating
and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as
regulated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all local,
state, and federal regulations that relate to the disposal of products that
contain lead, batteries, plastics, etc. If your dealer is unable to assist
you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the rear of the product. The model num-
ber, serial number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the date of
purchase in the spaces provided below and retain this manual as a per-
manent record of your purchase.
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
92-BP
(rear)
CAN ICES-3 (B)/NMB-3(B)
AC adaptor
(can_b_02)
4 CP4 STAGE/CP40 STAGE Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
• Do not place the power cord near heat sources such as heaters or
radiators. Also, do not excessively bend or otherwise damage the
cord, or place heavy objects on it.
• Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
• (For CP40 STAGE) Use the specified adaptor (page 54) only. Using
the wrong adaptor can result in damage to the instrument or
overheating.
• (For CP4 STAGE) Use only the supplied power cord/plug.
• Check the electric plug periodically and remove any dirt or dust
which may have accumulated on it.
(For CP4 STAGE) Be sure to connect to an appropriate outlet with a
protective grounding connection. Improper grounding can result in
electrical shock. (For details on grounding, see page 15.)
This instrument contains no user-serviceable parts. Do not open the
instrument or attempt to disassemble or modify the internal
components in any way. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or
wet conditions, place on it any containers (such as vases, bottles or
glasses) containing liquids which might spill into any openings. If
any liquid such as water seeps into the instrument, turn off the
power immediately and unplug the power cord from the AC outlet.
Then have the instrument inspected by qualified Yamaha service
personnel.
• Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
• When one of the following problems occurs, immediately turn off
the power switch and disconnect the electric plug from the outlet.
Then have the device inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
Power supply/Power cord (CP4 STAGE)
Power supply/AC power adaptor (CP40 STAGE)
Do not open
Water warning
Fire warning
If you notice any abnormality
DMI-5 1/2
CP4
IMPORTANT SAFETY INSTRUCTIONS (for CP4 STAGE)
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturers instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
(UL60065_03)
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CP4 STAGE/CP40 STAGE Owner’s Manual 5
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a
multiple-connector. Doing so can result in lower sound quality, or
possibly cause overheating in the outlet.
• When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord can
damage it.
• Remove the electric plug from the outlet when the instrument is not
to be used for extended periods of time, or during electrical storms.
• Do not place the instrument in an unstable position where it might
accidentally fall over.
• (For CP4 STAGE) Do not place objects in front of the instrument’s
air vent, since this may prevent adequate ventilation of the internal
components, and possibly result in the instrument overheating.
• Before moving the instrument, remove all connected cables, to
prevent damage to the cables or injury to anyone who might trip
over them.
• When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from
the outlet. Even when the power switch is turned off, electricity is
still flowing to the product at the minimum level. When you are not
using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.
• Before connecting the instrument to other electronic components,
turn off the power for all components. Before turning the power on
or off for all components, set all volume levels to minimum.
• Be sure to set the volumes of all components at their minimum
levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.
• Do not insert a finger or hand in any gaps on the instrument.
Never insert or drop paper, metallic, or other objects into the gaps
on the panel or keyboard. This could cause physical injury to you or
others, damage to the instrument or other property, or operational
failure.
• (For CP4 STAGE) Do not insert anything into the instrument’s air
vent. This could cause physical injury to you or others, damage to
the instrument or other property, or operational failure.
• Do not rest your weight on, or place heavy objects on the
instrument, and do not use excessive force on the buttons, switches
or connectors.
Do not use the instrument/device or headphones for a long period of
time at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or
ringing in the ears, consult a physician.
Always turn the power off when the instrument is not in use.
(For CP40 STAGE) Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the
minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
Power supply/Power cord (CP4 STAGE)
Power supply/AC power adaptor (CP40 STAGE)
Location
Connections
Handling caution
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
DMI-5 2/2
6 CP4 STAGE/CP40 STAGE Owner’s Manual
NOTICE
To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the
notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise,
the instrument, TV, or radio may generate noise. When you use the instrument along with an application on your iPad, iPhone
or iPod touch, we recommend that you set “Airplane Mode” to “ON” on that device in order to avoid noise caused by
communication.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or
unstable operation.
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the
instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off
immediately with a soft cloth.
Saving data
Data in the Edit Buffer will be lost, when you turn off the power to the instrument. Store the data in User Memory, or save it on
external devices, such as a USB flash-memory device or a computer. (For details on the Edit Buffer and User Memory, see the
Reference Manual pdf document.)
Data stored in User Memory may be lost due to malfunction or incorrect operation. Save any important data on external
devices, such as a USB flash-memory device or a computer.
To protect against data loss through media damage, we recommend that you save your important data onto two USB flash-
memory devices or computers.
Information
About copyrights
Copying of the commercially available data, including, but not limited to, MIDI data and/or audio data is strictly prohibited
except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to
which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software,
style files, MIDI files, Wave data, musical scores and sound recordings. Any unauthorized use of such programs and contents
outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T
MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
About functions/data bundled with the instrument
This device is capable of using various types/formats of music data by optimizing them to the proper format music data for
use with the device in advance. As a result, this device may not play them back precisely as their producers or composers
originally intended.
About this manual
The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat
different from those on your instrument.
In cases where no significant difference exists between CP4 STAGE and CP40 STAGE diagrams and screen images, those
corresponding to CP4 STAGE are shown in this manual.
Square brackets indicate buttons from the control panel in addition to jacks and terminals from the rear panel.
Windows is a registered trademark of Microsoft
®
Corporation in the United States and other countries.
Apple, Mac, Macintosh, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
Specifications and descriptions in this Owner's Manual are for information purposes only. Yamaha Corporation reserves the
right to modify products or specifications at any time without prior notice. Since specifications, equipment, and options may
not be the same in every locale, please check with your Yamaha dealer. For the most up-to-date information, please download
the latest version (pdf) from the following web page:
http://download.yamaha.com/
CP4 STAGE/CP40 STAGE Owner’s Manual 7
Welcome
Thank you for purchasing the Yamaha CP4 STAGE or CP40 STAGE Stage Piano. Please read this owner’s manual
carefully before using the instrument in order to take full advantage of its various features. When you have finished
reading the manual, keep it in a safe, accessible place, and refer to it when you need to better understand an operation
or function.
Accessories
Owner’s Manual (this book)
Power cord (CP4 STAGE) / Power adaptor (CP40 STAGE)*
Foot pedal (FC3A)
*May not be included in your area. Please check with your Yamaha dealer.
Using the Manuals
Four different manuals have been prepared for your CP4 STAGE or CP40 STAGE — this Owner’s Manual, the Reference
Manual, the Synthesizer Parameter Manual, and the Data List. A hard-copy version of the Owner’s Manual comes
together with the instrument, and the other three manuals are provided as pdf files on the Yamaha Downloads web page
(described later).
Owners Manual (this booklet)
This Owner’s Manual describes how to set up your CP4 STAGE or CP40 STAGE and perform basic operations. This is the
document you should read first when you start playing and using the instrument.
Reference Manual (pdf document)
The Reference Manual describes the design of the CP4 STAGE and CP40 STAGE and all of the parameters that may be
set. The manual includes the following:
Design of the CP4 STAGE & CP40 STAGE
•Makeup
Controllers
Tone Generator
Effect Unit
•Memory
Reference
Performances
File Area
Utility Area
Appendix
•MIDI
Synthesizer Parameter Manual (pdf document)
The Synthesizer Parameter Manual provides a description of Voice parameters, effect types, effect parameters, and MIDI
messages often used on Yamaha electronic instruments. We recommend that you first read this Owner’s Manual and the
Reference Manual, and then refer to the Synthesizer Parameter Manual if you wish to know more about a specific Voice
parameter, effect, or the like.
Data List (pdf document)
The Data List provides tables of the Voices, Performances, and effects found on the CP4 STAGE and CP40 STAGE in
addition to MIDI-related content.
8 CP4 STAGE/CP40 STAGE Owner’s Manual
How to use the PDF manuals
The Reference Manual, the Synthesizer Parameter Manual, and the Data List are provided as data documents in PDF
format. The PDF manuals listed above can be obtained from the Yamaha Downloads web page. To do so, go to the
web page using the following URL, enter “CP4” or “CP40” into the “Model Name” field, and then click “Search.”
Yamaha Downloads:
http://download.yamaha.com/
These PDF files can be viewed and read on a computer. When using Adobe
®
Reader
®
to view a PDF file, you can
search for specific words, print a specific page or link to open a desired section in the manual. The term search and
link functions are especially convenient methods of navigating through a PDF file, and we recommend that you use
them. The latest version of Adobe Reader can be downloaded from the following URL.
http://www.adobe.com/products/reader
Latest firmware version
Yamaha may from time to time update product firmware and the other associated software without prior notice. We
recommend that you check our web site for later releases and upgrade the firmware of your CP4 STAGE/CP40 STAGE
or the associated software.
http://www.yamahasynth.com/
Note that the explanations in this Owner’s Manual apply to the version of firmware released when this Owner’s Manual
was produced. For details on additional functions in later releases, refer to the above web site.
Information for users on collection and disposal of old equipment:
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic
products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in
accordance with your national legislation.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authori-
ties or dealer and ask for the correct method of disposal.
(weee_eu_en_02)
CP4 STAGE/CP40 STAGE Owner’s Manual 9
Principal Features
Authentic acoustic- and electric-piano sounds of unparalleled quality
Building on our decades of accomplishment in the production of stage pianos, we have delicately adjusted the sound of
each individual key and realized perfect balance over the full length of the keyboard, creating full-bodied piano tones
ideal for solo performances and ever-present sounds well suited for playing within an ensemble. Furthermore, by
analyzing and replicating the sound-producing mechanisms of classic electric pianos using cutting-edge technologies,
we have been able to achieve an extremely smooth response in the CP4 STAGE and CP40 STAGE keyboards. Through
the modeling both of original pre-amplifiers and of effectors responsible for the rich variety of tones indispensable to
quality sound production, we have faithfully reproduced many electric piano sounds now regarded as classics.
Wealth of voices and effects for greater flexibility in live performances
In addition to piano voices, your CP4 STAGE or CP40 STAGE also offers a diverse selection of other musical instruments,
such as strings, guitar, and bass. With many versatile effects such as choruses and flangers also built-in, you can easily
create a rich tapestry of different sounds for your stage performances.
Weighted hammer-action, 88-key keyboards that feel just like the real thing
The CP4 STAGE and CP40 STAGE employ an 88-key keyboard with a weighted hammer-action design that is virtually
indistinguishable from an actual piano. The CP4 STAGE also features a wooden keyboard.
Easy overlaying and division of keyboard zones
Using your stage piano’s layering and splitting functions, you can easily layer the Parts that make up each Performance
or assign them to specific left-hand and right-hand zones.
Record and playback functions for audio
Your CP4 STAGE or CP40 STAGE can record keyboard performances as audio data (Wave files) on a USB flash-memory
device. Wave files from a USB flash-memory device can also be played back as backing tracks for your performances.
What’s more, you can also connect a portable music player and output its audio from the stage piano together with the
music being played on the instrument.
Convenient master-keyboard function
Using your stage piano’s master-keyboard function, which has been specially crafted for use in live-performance
settings, up to four virtual zones can be set up along the keyboard and assigned to four different tone generators,
including other MIDI instruments.
10 CP4 STAGE/CP40 STAGE Owner’s Manual
Table of Contents
PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
NOTICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Principal Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Component Names & Functions 12
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting Up 15
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting Audio Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Turning On and Off the Stage Piano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting Volume and LCD Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Basic Operations & Display Content 19
Cursor Types & Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing & Setting Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Displaying Menus & Making Selections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing Panes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Exiting from the Current Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Performances 21
Parts Within a Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing Performances & Voices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Quick Start Guide 22
Playing Voices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Layering Voices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Splitting the Keyboard for Left and Right Hands . . . . . . . . . . . . . . . . . . . . . 25
Practicing with the Metronome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Changing Sounds Using Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Raising or Lowering the Pitch of Keyboard Notes . . . . . . . . . . . . . . . . . . . . 29
Storing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Selecting a Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
CP4 STAGE/CP40 STAGE Owner’s Manual 11
Creating Your Own Performances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Recording Your Playing as Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Playing Audio Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
File Operations Using a USB Flash-Memory Device . . . . . . . . . . . . . . . . . . 39
Configuring Utility Settings for the Overall System. . . . . . . . . . . . . . . . . . . . 41
Using with a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Using with a Portable Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Using with Other MIDI Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Appendix 48
Shift Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
On-screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
12 CP4 STAGE/CP40 STAGE Owner’s Manual
Component Names & Functions
Component Names & Functions
Control Panel
(Illustration shows the CP4 STAGE.)
Pitch bend wheel (page 28)
Use this controller to raise or lower the pitch of played
notes in a continuously variable manner.
Modulation wheel (page 28)
Use this controller to add varying degrees of vibrato and
other effects to played notes.
[MASTER VOLUME] dial (page 18)
Turn this dial to adjust the overall volume of the stage
piano.
Part buttons (page 23)
The following Part buttons control different Parts:
[MAIN] button
Press to activate the Solo function and turn off all Parts
other than the MAIN Part.
[LAYER] button
[SPLIT] button
On the CP4 STAGE, the [LAYER] and [SPLIT] buttons can
be used to toggle on and off the corresponding Parts; on
the CP40 STAGE, both of these buttons toggle on and off
the SPLIT/LAYER Part. On both the CP4 STAGE and
CP40 STAGE, the MAIN Part is always on and cannot be
turned off.
[PART SELECT] button (page 23)
Use this button to change the currently selected Part.
Part sliders (page 28)
Use these sliders to adjust three parameters (Volume,
Chorus, and Reverb) for each of the Parts.
[SLIDER FUNCTION] button (page 28)
Use this button to change the parameter currently
assigned to the Part sliders (
). Each time you press this
button, the assigned parameter will change and the
indicator lights to its left will turn on and off to show the
current assignment.
[METRONOME] button (page 27)
Use this button to toggle the metronome on and off.
AUDIO PLAY/REC buttons (pages 35 and 36)
Use these buttons to control the playback and recording
of audio files.
[] (Stop) button
This button is used to stop playback and recording of an
audio file.
[ ] (Play) button
This button is used to start playback and recording of an
audio file. The indicator light above it will turn on during
playback and recording.
[ ] (Record) button
This button is used to open the screen for recording an
audio file. The indicator light above it will turn on during
recording.
[CHORUS] and [REVERB] SYSTEM EFFECT
buttons (page 34)
Use these buttons to toggle the instrument’s main chorus
and reverb effects on and off.
[A] and [B] PART EFFECT buttons (page 34)
Use these buttons to toggle Insertion Effect A and
Insertion Effect B on and off.
[MASTER COMP] button (page 42)
Use this button to toggle the instrument’s master
compressor on and off.
A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3
CP4 STAGE/CP40 STAGE Owner’s Manual 13
Component Names & Functions
[-] and [+] TRANSPOSE buttons (page 29)
Use these buttons to raise and lower the pitch of the
keyboard in steps of one semitone.
[FILE] button (page 39)
Use this button to open the File area in order to perform
file-related operations on the instrument itself or on the
connected USB flash-memory device.
[UTILITY] button (page 41)
Use this button to open the Utility area in order to set
parameters that affect the instrument as a whole.
[EDIT] button (page 31)
Use this button to edit Performances (page 21) and also
to compare edited and unedited versions. (For details on
the Compare Performance function, see the Reference
Manual (pdf).)
[STORE] button (pages 30 and 34)
Use this button to store Performances and Utility settings.
LCD (Liquid Crystal Display) (page 19)
Using the LCD, you can confirm system messages,
parameter settings, and a range of other information
depending on the function currently being used.
Data Dial (page 19)
Use this dial to change the value indicated by the on-
screen cursor.
[-1/NO] and [+1/YES] buttons (page 19)
Use these buttons to increase or decrease the value
indicated by the on-screen cursor in single units.
[PERFORMANCE PLAY/SELECT] button
(page 30)
Use this button to open the screen for selecting
Performances.
[PANEL LOCK] button (page 42)
Use this button to toggle the Panel Lock function on and
off. When on, control panel operations will be
deactivated.
[SHIFT] button (page 48)
Use this button in combination with others to perform a
range of different operations.
[EXIT] button (page 20)
The functions accessible using the stage piano’s screens
are arranged in a hierarchical structure. Press this button
to leave the current screen and move one step back
towards the top of the current area.
[ENTER] button
Use this button to make menu selections and confirm
settings. It can also be used to execute a range of
functions.
[ ], [ ], [ ], and [] (Cursor) buttons
(page 19)
Use these buttons to move the cursor on-screen in the
corresponding direction and to move between screen’s
panes.
Voice Category buttons (page 22)
Use these buttons to select different Voice categories.
MASTER EQUALIZER (EQ) sliders (page 29)
Use these sliders to adjust the gain in the corresponding
master-EQ frequency band.
C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7
14 CP4 STAGE/CP40 STAGE Owner’s Manual
Component Names & Functions
Rear Panel
CP4 STAGE
CP40 STAGE
[] switch (page 17)
On the CP4 STAGE, this Power switch turns the stage
piano on ( ) and off (). On the CP40 STAGE, it is
known as the Standby/On switch and sets the instrument
to on ( ) or Standby mode ( ).
[AC IN] jack (page 15)
Use this jack for the power cord that came with the
instrument.
DC IN jack (page 15)
Use this jack for the power adaptor that came with the
instrument.
Music stand attachment holes
Use these two holes to attach a music stand (sold
separately).
[PHONES] jack (page 16)
Use this standard 1/4” stereo audio jack to connect a pair
of headphones.
UNBALANCED [L/MONO] and [R] OUTPUT
jacks (page 16)
Use these two standard 1/4" mono audio jacks together to
output unbalanced stereo signals. Alternatively, if mono
output is required, only the [L/MONO] jack should be
connected.
BALANCED [L] and [R] OUTPUT jacks
(page 16)
Use these two XLR-type jacks together to output
balanced audio signals.
[AUX IN] jack (page 45)
Use this Auxiliary Input stereo mini-jack to connect other
audio equipment so that its output can be mixed with that
of the stage piano.
NOTE To balance the volumes of the stage piano and the
connected audio equipment, adjust the output volume of
the latter.
[TO HOST] USB terminal (page 44)
Use this terminal to connect your stage piano to the USB
terminal of a computer using a USB cable.
[TO DEVICE] USB terminal (page 39)
Use this terminal to connect a USB flash-memory device
to your stage piano.
[IN] and [OUT] MIDI terminals (page 45)
Use these two MIDI terminals to link up your stage piano
with other MIDI devices.
[SUSTAIN] FOOT SWITCH jack (page 17)
Use this jack to connect an FC3A Foot Switch (provided)
or an optional FC4A or FC5 Foot Switch for use as a
dedicated sustain pedal.
[ASSIGNABLE] FOOT SWITCH jack (page 17)
Use this jack to connect an optional FC4A or FC5 Foot
Switch in order to perform a range of freely assignable
functions.
FOOT CONTROLLER jack(s) (page 17)
The CP4 STAGE features two foot controller jacks, labeled
[1] and [2]; the CP40 STAGE has one. They can be used
to connect an optional FC7 Foot Controller in order to
perform a range of freely assignable functions.
Air vent
This vent prevents the instrument from overheating.
CP4 STAGE only
CP40 STAGE only
CP4 STAGE only
CP4 STAGE only
CP4 STAGE/CP40 STAGE Owner’s Manual 15
Setting Up
Setting Up
Power Supply
CP4 STAGE
1
Ensure that the [ ] (Power) switch on the
rear panel is set to the Off ( ) position.
2 Insert the appliance end of the bundled
power cord (see below) into the [AC IN] jack,
also on the rear panel.
3 Plug the other end of the power cord into a
domestic-use, AC wall outlet.
NOTE Carry out this procedure in reverse order when
disconnecting the power cord.
WARNING
Use only the AC power cord supplied with your stage piano.
The use of an inappropriate replacement can lead to
overheating or electric shock.
WARNING
The power cord supplied with your stage piano must not be
used with other electrical equipment. Failure to observe this
precaution can result in the equipment being damaged or
lead to the outbreak of fire.
WARNING
Make sure your CP4 STAGE meets the voltage requirement
for the country or region in which it is being used. The power
cord includes a grounding pin to prevent electrical shock
and damage to the equipment. When connecting to an outlet,
connect the adaptors ground lead to the ground screw. If
you are unsure how to make this connection, contact your
Yamaha dealer or service center.
CAUTION
The stage piano remains charged and draws a small amount
of power even when the [] (Power) switch is set to the Off
position. If it will not be used for an extended period of time,
therefore, be sure to unplug the power cord from the wall
outlet.
CP40 STAGE
1
Ensure that the [ ] (Standby/On) switch on
the rear panel is set to the Standby ( )
position.
2 Connect the DC power cord from the bundled
power adaptor (see below) to the DC IN jack
on the rear panel.
3 Plug the adaptors AC power cord into a
domestic-use, AC wall outlet.
NOTE Carry out this procedure in reverse order when
disconnecting the power adaptor.
WARNING
Be sure to use only the power adaptor supplied with your
stage piano. Use of a different adaptor is inherently
dangerous and may result in equipment damage,
overheating, or the outbreak of fire.
WARNING
Make sure your CP40 STAGE meets the voltage requirement
for the country or region in which it is being used.
CAUTION
The stage piano remains charged and draws a small amount
of power even when the [] (Standby/On) switch is set to the
Standby position. If it will not be used for an extended period
of time, therefore, be sure to unplug the power adaptor from
the wall outlet.
[ ] switch
[AC IN] jack
DC IN jack
16 CP4 STAGE/CP40 STAGE Owner’s Manual
Setting Up
Connecting Audio
Equipment
Your stage piano does not come with built-in speakers. In
order to hear what you play, therefore, you will need to
connect it to other audio equipment such as amplifiers
and speakers. You can also plug a set of headphones
into the [PHONES] jack in order to monitor the sound
directly. Audio equipment can be connected in a number
of different ways, two of which are described below.
Based on the illustrations, choose the connection format
most suited to your setup.
CAUTION
To prevent hearing loss, avoid using headphones at high
volumes for extended periods of time.
NOTICE
Whenever connecting other audio equipment, ensure that all
devices are turned off.
Output via amplifiers or powered
speakers
Using a pair of keyboard amplifiers or powered speakers,
you can accurately reproduce the full richness of your
stage piano’s Performances (page 21) and effects,
including stereo panning. In this type of situation,
connections to the amplifiers or speakers should be
made via the UNBALANCED [L/MONO] and [R] OUTPUT
jacks on the rear panel. If you would prefer to monitor
your playing using a single keyboard amplifier or
powered speaker, the UNBALANCED [L/MONO]
OUTPUT jack should be used.
Output via a mixer
It is commonplace for musical instruments to be
connected to a mixer in recording and live-performance
environments. In addition to the unbalanced jacks
mentioned above, the CP4 STAGE also features a pair of
professional-use, balanced XLR jacks that prevent
unwanted noise from entering output signals. When
connecting to a mixer, we recommend that these
BALANCED [L] and [R] OUTPUT jacks be used. (As the
CP40 STAGE does not feature balanced output jacks, its
UNBALANCED [L/MONO] and [R] OUTPUT jacks should
be used in this type of situation.)
NOTE The sound output via the headphones is identical to that
output via the UNBALANCED [L/MONO] and [R] OUTPUT
jacks and the BALANCED [L] and [R] OUTPUT jacks.
Furthermore, plugging in or disconnecting a set of
headphones has no effect on the sound being output via
these jacks.
Left keyboard amplifier Right keyboard amplifier
[L/MONO] and [R] OUTPUT jacks
[PHONES] jack
OUTPUT R
OUTPUT L
[L] and [R]
OUTPUT jacks
[PHONES] jack
Amplifier
Left
speaker
Right
speaker
Mixer
CP4 STAGE/CP40 STAGE Owner’s Manual 17
Setting Up
Connecting Pedals
Two different types of pedal can be used with your stage
piano — foot switches, such as the bundled FC3A and
the optional FC4A and FC5, and a foot controller like the
optional FC7. Both are connected via the rear panel,
although the jacks used and the corresponding functions
differ as described below.
Foot switches
The FC3A Foot Switch that comes with your stage piano
is connected via the [SUSTAIN] FOOT SWITCH jack. It
functions in the same way as the damper pedal of an
acoustic piano, allowing notes played while it is operated
to sustain for longer than normal after you release the
corresponding keys.
The FC3A can also function as a half-damper pedal, and
in such a case, the damper effect will depend on the
degree to which the pedal is operated. You can activate
the half-damper playing technique as follows:
Press [UTILITY]; select 03: Controller using [ ] and [ ]
and press [ENTER]; set Sustain to “FC3 Half On” using
[-1/NO] and [+1/YES]; press [EXIT] several times to
return to the Performance screen (page 22).
An optional FC4A or FC5 Foot Switch can be connected
via the [ASSIGNABLE] FOOT SWITCH jack so that
various functions can be assigned to it. This allows you to
control the assigned parameter by foot.
NOTE Refer to the Reference Manual (pdf) for details on how to
assign a parameter to an FC4A or FC5 Foot Switch.
Foot controllers
Used to control an assigned parameter, an FC7 Foot
Controller (sold separately) is connected via the [1] and
[2] FOOT CONTROLLER jacks on the CP4 STAGE or via
the [FOOT CONTROLLER] jack on the CP40 STAGE. This
allows you to control assigned parameter(s) such as Part
volume(s) by foot.
NOTE Refer to the Reference Manual (pdf) for details on how to
assign a parameter to an FC7 Foot Controller.
Turning On and Off the
Stage Piano
Turning on
1
Ensure that your stage piano’s [MASTER
VOLUME] dial and the volumes of any
connected keyboard amplifiers or powered
speakers are turned fully down (i.e., to MIN or
0).
2 Set the [ ] switch on the rear panel to the
On ( ) position.
3 Turn on the keyboard amplifiers or powered
speakers.
Turning off
1
Ensure that the volumes of your stage piano
and any connected keyboard amplifiers or
powered speakers are turned fully down (i.e.,
to MIN or 0).
2 Turn off the keyboard amplifiers or powered
speakers.
3 On the CP4 STAGE, set the [] switch on the
rear panel to the Off () position; on the
CP40 STAGE, set it to the Standby ( )
position.
18 CP4 STAGE/CP40 STAGE Owner’s Manual
Setting Up
Auto Power-Off
The Auto Power-Off function automatically turns off your
stage piano after a certain period of inactivity, which is
approximately 30 minutes by default.
If you would like to disable this function, turn off the stage
piano once and then turn it back on while holding down
the leftmost key on the keyboard. The message “Auto
power off disabled” will be displayed on-screen, and this
function will remain disabled until you set a new Auto
Power-Off time.
If necessary, use the following procedure to set the time
until the Auto Power-Off function turns off the stage piano.
Press [UTILITY]; select 01: General using [ ] and press
[ENTER]; select AutoOff using [ ]; set the desired time
using [-1/NO] and [+1/YES] or the Data Dial; press
[STORE].
NOTICE
The stage piano remains charged and draws a small
amount of power even when turned off by the Auto Power-
Off function. To shut it down completely, therefore, unplug
it from the wall outlet.
In certain modes of operation such as when data has been
edited, the Auto Power-Off function may not turn off the
stage piano when the set period of inactivity has elapsed.
We recommend, therefore, that you always turn off the
instrument manually when you are finished using it.
If your stage piano is connected to other equipment such
as amplifiers, speakers, or a computer, but you do not
intend to use it for some time, we recommend that you
turn off all devices as described in their owners manuals.
Doing so eliminates the risk of damage to the other
equipment. If you do not want the stage piano to turn off
automatically when connected to other equipment, disable
the Auto Power-Off function.
Any unsaved data will be lost when the Auto Power-Off
function turns off the stage piano. Be sure, therefore, to
store your work before it does so.
If the stage piano’s AutoOff parameter is set to “off, that
setting will be retained when you import system data that
was saved externally, regardless of the Auto Power-Off
setting contained in that data. If, however, a specific Auto
Power-Off time has been set using the AutoOff parameter
and system data is imported, the Auto Power-Off setting
contained in that data will be applied.
It should be noted that executing the Factory Set function
(page 43) will cause the Auto Power-Off time to revert to
the default setting of 30 minutes.
NOTE
Settings for the Auto Power-Off function do not represent exact
times and there may be some variation.
When the Auto Power-Off function has turned off the instrument,
you will first need to return the [ ] switch to the Off () position in
the case of the CP4 STAGE or the Standby () position in the
case of the CP40 STAGE before turning it back on.
Adjusting Volume and LCD
Contrast
While playing your stage piano, you can adjust the output
volume either on the instrument itself or via your keyboard
amplifiers or powered speakers. The stage piano’s
volume is adjusted using the [MASTER VOLUME] dial.
Set the instrument’s volume to close to 70% of the
maximum, and then raise the volume on the keyboard
amplifiers or powered speakers by an appropriate
amount.
NOTE The stage piano’s [MASTER VOLUME] dial cannot be used
to adjust the volume of audio being input via the [AUX IN]
jack (page 45).
CAUTION
To prevent hearing loss, avoid using headphones at high
volumes for extended periods of time.
If you find it difficult to read the on-screen text, you can
adjust the LCD contrast using the [-1/NO] and [+1/YES]
buttons with the [UTILITY] button held down.
NOTE The Contrast parameter on the General screen from the
Utility area can also be used to adjust the LCD contrast as
described above. Refer to the Reference Manual (pdf) for
details.
70%
LoudestQuietest
CP4 STAGE/CP40 STAGE Owner’s Manual 19
Basic Operations & Display Content
Basic Operations & Display Content
Cursor Types & Operations
The following two types of cursor are used on-screen to
highlight the current selection:
Arrow cursor
The arrow cursor ( ) flashes to the left of the currently
selected item. You can move this cursor up, down, left,
and right, depending on the current screen, using the
[ ], [ ], [], and [ ] buttons.
Flashing cursor
On naming screens, the currently selected character will
itself flash on and off. You can move this cursor to the left
and right only using the [] and [ ] buttons.
[ ], [ ], [], and [ ] buttons
The [ ], [ ], [], and [ ] buttons can be used to move
the cursor in the corresponding direction on-screen. The
[ ] and [ ] buttons can also be used to display menu
items and to move between panes on screens containing
more than one.
Changing & Setting Values
Data Dial
The Data Dial can be turned clockwise to increase values
and vice-versa. In addition, when adjusting parameters
with a wide range of possible settings, you can turn the
Data Dial with the [SHIFT] button held down to increase
or decrease in units of 10.
[-1/NO] and [+1/YES] buttons
The [+1/YES] button increases the current setting by one
each time it is pressed; the [-1/NO] button decreases it. If
you hold down either button, the setting will change
continuously. In addition, when adjusting parameters with
a wide range of possible settings, you can press these
buttons with the [SHIFT] button held down to increase or
decrease accordingly in units of 10.
Increase
setting
Decrease
setting
Decrease setting
by one
Increase setting
by one
20 CP4 STAGE/CP40 STAGE Owner’s Manual
Basic Operations & Display Content
Displaying Menus &
Making Selections
Certain editing areas contain a number of different
screens that can be selected from a menu as follows.
Use the [ ] and [ ] buttons to change the currently
displayed menu item, and press the [ENTER] button to
make a selection. The up and down More symbols (
and ) shown to the left of the menu item number
indicate that the menu contains more items above and/or
below the one displayed.
Changing Panes
Certain editing screens are split over a number of
different panes. In such a case, up and down More
symbols ( and ) will be shown at the bottom-right of
the screen. You can use the [ ] and [ ] buttons in such
a situation to move between panes.
Entering Text
When editing parameters supporting text input, such as
the name of a Performance, first use the [ ] and [ ]
buttons to move the flashing cursor to the character you
wish to change. You can then change the character at
that position using the [-1/NO] and [+1/YES] buttons or
the Data Dial.
Exiting from the Current
Screen
You can press the [EXIT] button to move one step back in
the stage piano’s menu structure. Pressing the [EXIT]
button several times will return you to the Performance
screen — that is, the first one displayed when the
instrument is turned on.
Menu item
number
Screen name
More menu items below
More menu items above
and below
More menu items above
Editable parameters
More symbol indicating additional pane(s)
Flashing cursor shows selected character
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Yamaha CP40 Stage Manuale del proprietario

Categoria
Attrezzatura musicale
Tipo
Manuale del proprietario
Questo manuale è adatto anche per