ESAB YardFeed 2000, Origo™ YardFeed 2000, Aristo® YardFeed 2000 Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente

Questo manuale è adatto anche per

Valid for serial no. 616--xxx--xxxx0459 936 227 060602
YardFeed 2000
Aristot
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 12..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 5.......................................................
2.1 Îáîðóäîâàíèå 5...........................................................
2.2 Ïàíåëü óïðàâëåíèÿ MA6 6..................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 6................................
ÑÒÀÍÎÂÊÀ 7.......................................................
4.1 Èíñòðóêöèè ïî ïîäúåìó 7..................................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 8...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 8.....................................
5.2 Îïèñàíèå ôóíêöèé 9.......................................................
5.3 Äàâëåíèå ïîäà÷è ïðîâîëîêè 10..............................................
5.4 Çàìåíà è âñòàâêà ïðîâîëîêè 10..............................................
5.5 Çàìåíà ïîäàþùåãî ðîëèêà 10...............................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 11.................................
6.1 Ïðîâåðêà è î÷èñòêà 11......................................................
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 11.......................................
ÑÕÅÌÀ 22..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 24.....................................................
ÁÛÑÒÐÎÈÝÍÀØÈÂÅÌÛÅ ÄÅÒÀËÈ 26...................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 28...........................
bm46d1ra -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
ÂÍÈÌÀÍÈÅ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî
èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
RU
bm46d1ra -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÎÑ ÒÎÐÎÆÍÎ!
ÄÓÃÎÂÀß ÑÂÀÐÊÀ È ÐÅÇÊÀ ÎÏÀÑÍÛ ÊÀÊ ÄËß ÈÑÏÎËÍÈÒÅËß ÐÀÁÎÒ, ÒÀÊ È ÄËß
ÏÎÑÒ ÎÐÎÍÍÈÕ ËÈÖ. ÒÐÅÁÓÉÒÅ ÑÎÁËÞÄÅÍÈÅ
ÂÑÅÕ ÏÐÀÂÈË ÁÅÇÎÏÀÑÍÎÑÒÈ,
ÄÅÉÑÒ
ÂÓÞÙÈÕ ÍÀ ÎÁÚÅÊÒÅ, ÊÎÒÎÐÛÅ ÄÎËÆÍÛ Ó×ÈÒÛÂÀÒÜ ÑÂÅÄÅÍÈß ÎÁ ÎÏÀÑÍÎÑÒßÕ,
ÏÐÅÄÑÒÀ
ÂËÅÍÍÛÅ ÈÇÃÎÒÎÂÈÒÅËÅÌ ÑÂÀÐÎ×ÍÎÃÎ ÎÁÎÐÓÄ ÎÂÀÍÈß.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå ê îíò àêòà íàõîäÿùèõñ ÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëàîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññò îÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæ åíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýòîãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñò îðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
2 ÂÂÅÄÅÍÈÅ
Áëîê ïîäà÷è ïðîâîëîêè YardFeed 2000 ñ ïóëüòîì óïðàâëåíèÿ MA6
ïðåäíàçíà ÷åí äëÿ ýëåêòðîäóãîâîé ñâàðêè â ñðåäå çàùèòíîãî ã àçà îáû÷íîé
ñâàðî÷íîé ïðîâîëîêîé (MIG) èëè áåç ãàçà ïðîâîëîêîé ñ ôëþñîì (MAG) ïðè
èñïîëüçîâàíèè ñâàðî÷íûõ èñòî÷íèêîâ ïèòàíèÿ ñî ñòóïåí÷àòîé ðåãóëèðîâêîé è
òèðèñòîðíûì óïðàâëåíèåì.
Îíè âûïóñêàþò ñÿ â ðàçëè÷íûõ âåðñèÿõ, ñì. Ñòð. 24.
Áëîê ïîäà÷è ïðîâîëîêè ñîäåðæèò ÷åòûðåõðîëèêîâûå ìåõàíèçìû ïîäà÷è
ïðîâîëîêè, à òàêæå ýëåêòðîííóþ ñõåìó óïðàâëåíèÿ.
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 28.
2.1 Îáîðóäîâàíèå
Áëîê ïîäà÷è ïðîâîëîêè êîìïëåêòóåòñÿ ñëåäóþùèì:
S Ðóêîâîäñòâî ïî ýêñïëóàòàöèè áëîêà ïîäà÷è ïðîâîëîêè
S Ðóêîâîäñòâî ïî ðàáîòå ñ ïàíåëüþ óïðàâëåíèÿ
S ßðëûê ñ ïåðå÷íåì ðåêîìåíäîâàííûõ ñìåííûõ äåòàëåé
S Ãàçîâûé ðàñõîäîìåð
RU
bm46d1ra -- 6 --
2.2 Ïàíåëü óïðàâëåíèÿ MA6
Ïðè ïîìîùè ðó÷åê óïðàâëåíèÿ, ïðåäíàçíà÷åííûõ äëÿ
óñòàíîâêèíàïðÿæåíèÿèñêîðîñòèïîäà÷èïðîâîëîêè/ñèëû
òîêà. Äðóãèå ïàðàìåòðû ðåã óëèðóþòñÿ ñ ï îìîùüþ êíîïîê ñ
òåêñòîì íà ïàíåëè äèñïëåÿ.
Ïîäðîáíîå îïèñàíèå ïàíåëè óïðàâëåíèÿ MA6 ïðèâåäåíî â îòäåëüíîì
ðóêîâîäñòâå ïî ýêñïëóàòàöèè.
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
Aristo YardFeed 200
Íàïðÿæåíèå ñåòè 42 Â 50-60 Ãö
Ïîòðåáëÿåìàÿ ìîùíîñòü 180 ÂÀ
Ìàêñèìà ëüíûé òîê
ýëåêòðîäâèãà ò åëÿ
3,5 A
Ñêîðîñòü ïîäà÷è ïðîâîëîêè 0,8 - 25,0 ì/ìèí
Ñîåäèíåíèå ïèñòîëåòà EURO
Ìàêñ. äèàìåòð êàòóøêè ñ
ïðîâîëîêîé
200 ìì
Äèàìåòð ïðîâîëîêè
Fe
Ss
Al
Ïðîâîëîêà ñ ñåðäå÷íèêîì
0,6 - 1,2 ìì
0,6 - 1,2 ìì
1,0 - 1,2 ìì
0,8 - 1,2 ìì
Ìàññà 11 , 3 ê ã
Ðàçìåðû, ä x ø x â 593 x 210 x 302 ìì
Çàùèòíûé ãàç:
ìàêñèìàëüíîå äàâëåíèå
(Âñåõ òèïîâ, ïðåäíàçíà÷åííûõ äëÿ ýëåêòðîäóãîâîé
ñâàðêè â ñðåäå çàùèòíîãî ãàçà îáû÷íîé ñâàðî÷íîé
ïðîâîëîêîé (MIG) èëè áåç ãàçà ïðîâîëîêîé ñ ôëþñîì
(MAG)).
àð
Òèï îõëàæäåíèÿ
ìàêñèìàëüíîå äàâëåíèå
60% âîäà / 40% ýòèëåíãëèêîëü
àð
Ìàêñèìàëüíàÿ äîïóñòèìàÿ
íàãðóçêà ïðè
ðàáî÷åì öèêëå 60%
365 A
Ê ëàññ çàùèòû êîðïóñà IP23
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
RU
bm46d1ra -- 7 --
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
ÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
ÂÍÈÌÀÍÈÅ!
Íàñòîÿùåå èçäåëèå ïðåäíàçíà÷åíî äëÿ ïðîìûøëåííîãî èñïîëüçîâàíèÿ. Ïðè
èñïîëüçîâàíèè â áûòîâûõ óñëîâèÿõ îíî ìîæåò ñîçäàâàòü ðàäèî÷àñòîòíûå ïîìåõè.
Ïîëüçîâàòåëü îòâå÷àåò çà ïðèíÿòèå ñîîòâåòñòâóþùèõ ìåð ïðåäîñòîðîæíîñòè.
ÂÍÈÌÀÍÈÅ!
Ïðè ïðîâåäåíèè ñâàðêè â óñëîâèÿõ ïîâûøåííîé îïàñíîñòè ïîðàæåíèÿ ýëåêòðè÷åñêèì
òîêîì ðàçðåøàåòñÿ èñïîëüçîâàòü òîëüêî èñòî÷íèêè ïèòàíèÿ â ñîîòâ åòñòâóþùåì
áåçîïàñíîì èñïîëíåíèè. Òàêèå èñòî÷íèêè ïèòàíèÿ ïîìå÷åíû ñèìâîëîì .
4.1 Èíñòðóêöèè ïî ïîäúåìó
RU
bm46d1ra -- 8 --
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
Ïðåäóïðåæäåíèå!
Óá åäèòåñü, ÷òî áîêîâûå ïàíåëè çàêðûòû â î âðåìÿ ðàá îòû.
Äëÿ ïðåäîòâðàùåíèÿ ñîñêàëüçûâàíèÿ êàòóøêè ñ ïðîâîëîêîé ñî
âòóëêè çàôèêñèðóéòå åå ïîâîðîòîì êðàñíîé êíîïêè êàê ïîêàçàíî
íà ðèñóíêå ðÿäîì ñî âòóëêîé.
ÏÐÅÄÓÏÐÅÆÄÅÍÈÅ !
ÎÑÒÎÐÎÆÍÎ !
Ñîáëþäàéòå îñòîðîæíîñòü! Âðàùàþùèåñÿ äåòàëè ìîãóò íàíåñò è
òðàâìû!
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
1 Ïîäñîåäèíåíèå ñâàðî÷íîé öåïè ê
èñòî÷íèêó ïèòàíèÿ, (OKC)
7 Ïîäñîåäèíåíèå îõëàæäàþùåé âîäû
ÑÈÍÈÉ ñîåäèíèòåëü ê ñâàðî÷íîé
ãîðåëêå ñ ïîìîùüþ íàñîñà ñ
ëîãè÷åñêèì óïðàâëåíèåì* ESAB
2 Ïîäñîåäèíåíèå çàùèòíîãî ãàçà 8 Ïîäñîåäèíåíèå ïóëüòà äèñòàíöèîííîãî
óïðàâëåíèÿ
3 Ïîäñîåäèíåíèå óïðàâëÿþùåãî ê àáåëÿ
îò èñòî÷íèêà ïèòàíèÿ
9 Ïðåäîõðàíèòåëüíûé êîíòàêòíûé
âûêëþ÷àòåëü
4 Ïîäñîåäèíåíèå îõëàæäàþùåé âîäû
(êðàñíûé ñîåäèíèòåëü) ê èñòî÷íèêó
ïèòàíèÿ (áëîêó îõëàæäåíèÿ)
10 Ïîäñîåäèíåíèå ñâàðî÷íîãî ïèñòîëåòà
5 Ïîäñîåäèíåíèå îõëàæäàþùåé âîäû
(ñèíèé ñîåäèíèòåëü) èç èñòî÷íèêà
ïèòàíèÿ (áëîêà îõëàæäåíèÿ)
11 Ïàíåëü óïðàâëåíèÿ,
(ñì. ñîîòâåòñòâóþùåå Ðóêîâîäñòâî ïî
ýêñïëóàòàöèè)
6 Ïîäñîåäèíåíèå îõëàæäàþùåé âîäû
(êðàñíûé ñîåäèíèòåëü) èç ñâàðî÷íîãî
ïèñòîëåòà
Âíèìàíèå! Ïîäñîåäèíåíèå îõëàæäàþùåé âîäû ïðåäóñìàòðèâàåòñÿ òîëüêî íà
îïðåäåëåííûõ ìîäåëÿõ.
* ELP = Íàñîñ ñ ëîãè÷åñêèì óïðàâëåíèåì ESAB, ñì. ïóíêò 5.2.
RU
bm46d1ra -- 9 --
5.2 Îïèñàíèå ôóíêöèé
Ïîäâîä âîäû
Áëîê ïîäà÷è ïðîâîëîêè ñ ïîäâîäîì âîäû îáîðóäîâàí ñèñòåìîé îáíàðóæåíèÿ
ELP (ESAB Ëîãè÷åñêèé Íàñîñ), êîòîðàÿ ïðîâåðÿåò, ïðèñîåäèíåíû ëè øëàíãè
ïîäà÷è âîäû. Ïðè ïîäê ëþ÷åíèè ñâàðî÷íîãî ïèñòîëåòà ñ âîäÿíûì
îõëàæäåíèåì, çàïóñêàåòñÿ âîäÿíîé íàñîñ.
Ôóíêöèÿ îáíàðóæåíèÿ ðàáîòàåò òîëüêî ñ òåìè èñòî÷íèêàìè ïèòàíèÿ, êîòîðûå
îáîðóäîâàíû ñèñòåìîé ELP.
Óñòðîéñòâî äëÿ ñíÿòèÿ íàïðÿæåíèÿ
Ïîäâåñüòå óñòðîéñòâî ä ëÿ ñíÿòèÿ íàïðÿæåíèÿ íà êðþ÷îê, ðàñïîëîæåííûé íà
çàäíåé ñòîðîíå áëîêà ïîäà÷è, è çàêðåïèòå ñîåäèíèòåëüíûé êàáåëü.
Ïðåäîõðàíèòåëüíûé êîíòàêòíûé âûê ëþ÷àòåëü
0 Ñâàðêà ÂÛÊË
1 Ñâàðêà ÂÊË
Íàãðåâ ÂÊË (âñïîìîãàòåëüíîå óñòðîéñòâî)
èñâàðêàÂÛÊË
Ìåñòî, ãäå óñòàíîâëåíà êàòóøêà,
íàãðåâàåòñÿ, ÷òî èñêëþ÷àåò îòñûðåâàíèå
ñâàðî÷íîé ïðîâîëîêè ïðè ñâàðêå.
Ðåãóëèðîâàíèå ðàñõîäà ãàçà
A = Ðåãóëèðîâàíèå ðàñõîäà ãàçà.
B = Ãàçîâûé ðàñõîäîìåð
RU
bm46d1ra -- 1 0 --
5.3 Äàâëåíèå ïîäà÷è ïðîâîëîêè
Ïðåæäå âñåãî óáåäèò å ñü â ò îì, ÷òî ïðîâîëîêà áåñïðåïÿòñòâåííî äâèæåòñÿ
÷åðåç íàïðàâëÿþùèå. Ïîñëå ýòîãî óñòàíîâèòå óñèëèå, ñîçäàâàåìîå
ðîëèêàìè ïîäà÷è ïðîâîëîêè. Ïîìíèòå, ÷òî ýòî óñèëèå íå äîëæíî áûòü
÷ðåçìåðíûì.
Ðèñ. 1 Ðèñ. 2
Äëÿ ïðîâåðêè ïðàâèëüíîñòè óñòàíîâêè óñèëèÿ ïîäà÷è ïîìåñòèòå êàêîé-ëèáî
òâåðäûé ïðåäìåò, íàïðèìåð, äåðåâÿííûé áðóñîê í à ïóòè ïîäà÷è ï ðîâîëîêè.
Ïðè ðàññòîÿíèè ïðèìåðíî 5 ìì îò ïèñòîëåòà ä ëÿ ïîäà÷è ïðîâîëîêè äî
äåðåâÿííîãî áðóñêà (ðèñ. 1) ïîäàþùèå ðîëèêè äîëæíû ïðîñêàëüçûâàòü.
Ïðè ðàññòîÿíèè ïðèìåðíî 50 ìì ïðîâîëîêà äîëæíà ïîäàâàòüñÿ è ñãèáàòüñÿ
ïðè óïîðå â áðóñîê (ðèñ. 2).
5.4 Çàìåíà è âñòàâêà ïðîâîëîêè
S Îòêðîéòå áîêîâóþ ïàíåëü.
S Îòñîåäèíèòå äàò÷èê äàâëåíèÿ, îòêèíóâ åãî íàçàä, ïðè ýòîì íàæèìíûå
ðîëèêè ïåðåäâèíóòñÿ ââåðõ.
S Âûïðÿìèòå íîâóþ ïðîâîëîêó íà äëèíó 10-20 ñì. Ïðåæäå ÷åì ââîäèòü åå â
áëîê ïîäà÷è ïðîâîëîêè, óäàëèòå íàïè ëüíèêîì ñ òîðöà ïðîâîëîêè
çàóñåíöû è îñòðûå êðîìêè.
S Óáåäèòåñü â òîì, ÷òî ïðîâîëîêà ïðàâèëüíî ïîäàåòñÿ â êàíàâêó ïîäàþùèõ
ðîëèêîâ è â âûïóñêíóþ íàñàäêó èëè íàïðàâëÿþùóþ äëÿ ïðîâîëîêè.
S Çàêðåïèòå äàò÷èê äàâëåíèÿ.
S Çàêðîéòå áîêîâóþ ïàíåëü.
5.5 Çàìåíà ïîäàþùåãî ðîëèêà
S Îòêðîéòå áîêîâóþ ïàíåëü.
S Îòñîåäèíèòå äàò÷èê äàâëåíèÿ (1), îòêèíóâ åãî
íàçàä, ïðè ýòîì íàæèìíûå ðîëèêè
ïåðåäâèíóòñÿ ââåðõ.
S Îòñîåäèíèòå ïðèæèìíûå ðîëèêè (2), ïîâåðíóâ
îñü (3) íà 1/4 îáîðîòà ïî ÷àñîâîé ñòðåëêå è
âûòÿíóâ åå. Îòñîåäèíèòå ïðèæèìíûå ðîëèêè.
S Îòñîåäèíèòå ïîäàþùèå ðîëèêè (4), îòâèíòèâ
ãàéêè (5) è âûòÿíóâ ðîëèêè íàðóæó.
Äëÿ óñòàíîâêè ïîâòîðèòå âûøåîïèñàííûå îïåðàöèè â
îáðàòíîì ïîðÿäêå .
RU
bm46d1ra -- 1 1 --
Âûáîð êàíàâîê â ïîäàþùèõ ðîëèêàõ
Ïîâåðíèòå ïîäàþùèé ðîëèê òàê, ÷òîáû ðàçìåðíàÿ ìåòêà òðåáóåìîé êàíàâêè
áûëà îáðàùåíà ê âàì.
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð î èçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
6.1 Ïðîâåðêà è î÷èñòêà
Áëîê ïîäà÷è ïðîâîëîêè
Ðåãóëÿðíî ï ðîâåðÿéòå, ÷òîáû áëîê ïîäà÷è ï ðîâîëîêè íå áûë çàáèò ãðÿçüþ.
S Äëÿ îáåñïå÷åíèÿ áåñïåðåáîéíîé ïîäà÷è ïðîâîëîêè ñëåäóåò ñ
óñòàíîâëåíîé ïåðèîäè÷íîñòüþ âûïîëíÿòü î÷èñòêó è çàìåíó
èçíàøèâàåìûõ êîìïîíåíòîâ ìåõàíèçìà áëîêà ïîäà÷è. Èìåéòå ââèäó, ÷òî
åñëè ïðåäâàðèòåëüíîå íàòÿæåíèå óñòàíîâëåíî ñëèøêîì ñèëüíûì, òî ýòî
ìîæåò ïðèâåñòè ê ïîâûøåííîìó èçíîñó ïðèæèìíûõ ðîëèêîâ, ïîäàþùèõ
ðîëèêîâ è íàïðàâëÿþùèõ ä ëÿ ïðîâîëîêè.
Ñåðäå÷íèê ñ òîðìîçîì
Ñåðäå÷íèê ðåãóëèðóåòñÿ ïðè ïîñòàâêå ñ çàâîäà èçãîòîâèòåëÿ.
S Îòðåãóëèðóéòå òîðìîçÿùèé ñåðäå÷íèê òàêèì
îáðàçîì, ÷òîáû ïðîâîëîêà ïðè îñòàíîâêå ïîäà÷è
ñëåãêà ïðîâèñà ëà.
Ñâàðî÷íàÿ ãîðåëêà
S Äëÿ îáåñïå÷åíèÿ áåñïåðåáîéíîé ïîäà÷è ïðîâîëîêè ñëåäóåò ñ
óñòàíîâëåííîé ïåðèîäè÷íîñòüþ âûïîëíÿòü ÷èñòêó è çàìåíó
èçíàøèâàåìûõ êîìïîíåíòîâ ñâàðî÷íîé ãîðåëêè. Ðåãóëÿðíî äî÷èñòà
ïðîäóâàéòå íàïðàâëÿþùèå ä ëÿ ïðîâîëîêè è î÷èùàéòå êîíòàêòíóþ ã óáêó.
7 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
RU
ENGLISH
-- 1 2 --
TOCe
1 DIRECTIVE 13........................................................
2SAFETY 13...........................................................
3 INTRODUCTION 15...................................................
3.1 Equipment 15................................................................
3.2 Control panel MA6 15.........................................................
4 TECHNICAL DATA 15.................................................
5 INSTALLATION 16....................................................
5.1 Lifting instructions 16.........................................................
6 OPERATION 17.......................................................
6.1 Connections and control devices 17............................................
6.2 Function explanations 18......................................................
6.3 Wire feed pressure 19........................................................
6.4 Replacing and inserting wire 19................................................
6.5 Changing feed rollers 19......................................................
7 MAINTENANCE 20....................................................
7.1 Inspection and cleaning 20....................................................
8 ORDERING SPARE PARTS 20..........................................
DIAGRAM 22............................................................
ORDERING NUMBER 24.................................................
WEAR PARTS 26........................................................
ACCESSORIES 28.......................................................
-- 1 3 --
bm46d1ea
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, declares that Wire feed unit YardFeed
2000 from serial number 613 onwards, conforms to standard IEC/EN 60974--5, in accordance with the
requirements of directive (73/23/EEC) and appendix (93/68/EEC) and standard IEC/EN 60974--10 in
accordance with the requirements of directive (89/336/EEC) and appendix (93/68/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Denis Sharp
Technical Director
ESAB AB, Welding Equipment
SE--695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411924
L
axå 2006--04--03
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 1 4 --
bm46d1ea
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is s afe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect y our eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect y our ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding p rotectio n and accessories.
WARNING!
Read and understand the instruction manual before installing
or operating.
This product is solely intended for arc welding.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human health!
GB
-- 1 5 --
bm46d1ea
3 INTRODUCTION
The wire feed unit YardFeed 2000 with control panel MA6, is intended for MIG/MAG
welding together with Aristo welding current power sources.
It comes in different variants, see page 24.
The wire feed unit contains a four--wheel drive wire feed mechanism as well as
control electronics.
ESAB’s accessories for the product can be found on page 28.
3.1 Equipment
The wire feed unit is supplied with:
S Instruction manual for the wire feed unit
S Instruction manual for the control panel
S Decal with recommended wear parts
S Gas flow meter
3.2 Control panel MA6
Knobs for setting the voltage and the wire feed speed / welding
current. Other parameters are controlled by pushbuttons, with text
in the display panel.
See the separate instruction manual for a detailed description of the M A6 control
panel.
4 TECHNICAL DATA
YardFeed 2000
Mains voltage 42 V 50--60 Hz
Power requirement 180 VA
Motor current I
max
3.5 A
Wire feed speed 0.8 --25.0 m/min
Gun connection EURO
Max. diameter wire bobbin 200 mm
Wire dimension
Fe
Ss
Al
Cored wire
0.6 -- 1.2 mm
0.6 -- 1.2 mm
1.0 -- 1.2 mm
0.8 -- 1.2 mm
Weight 11.3 kg
Dimensions (l x w x h) 593 x 210 x 302 mm
Shielding gas
max pressure
All types intended for MIG/MAG welding
5 bar
GB
-- 1 6 --
bm46d1ea
YardFeed 2000
Type of cooling
max pressure
50% water / 50% etylenglycol
5 bar
Maximum permissible load at
60% duty cycle
365 A
Enclosure class IP23
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
5 I NSTALLATION
The installatio n must be executed b y a p rofession al.
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’ s responsibility to take adequate precautions.
WARNING!
When welding in an environment with increased electrical danger , only power sources intended
for this environment may be used. These power sources are marked with the symbol .
5.1 Lifting instructions
GB
-- 1 7 --
bm46d1ea
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 13. Read through before you start using the equipment!
WARNING!
Assure that the side panels are closed during operation.
WARNING!
Rotating parts can cause injury, take great care.
6.1 Connections and control devices
1 Connection for welding current from power
source, (OKC)
7 Connection BLUE, with ELP* for coolant to
the welding gun
2 Connection for shielding gas 8 Connection for remote control unit
3 Connection for control cable from power
source
9 Safety contact switch
4 Connection RED, for coolant to power
source (cooling unit)
10 Connection for welding gun
5 Connection BLUE, for coolant from power
source (cooling unit)
11 Control panel,
(see separate instruction manual)
6 Connection RED, for coolant from welding
gun
Note! Coolant connections only available on certain models.
* ELP = ESAB Logic Pump, see point 6.2.
AH 0744
GB
-- 1 8 --
bm46d1ea
6.2 Function explanations
Water connection
The wire feed unit with water connection is equipped with a detection system ELP
(ESAB Logic Pump) which checks that the water hoses are connected. When
connecting a water--cooled welding gun, the water pump starts.
Detection only works with power sources that are equipped with ELP.
Strain relief
Hook the strain relief onto the hook on the rear side of the feeder unit and the
connection cable.
Safety con tact switch
0 Welding OFF
1 Welding ON
Heat ON (accessory) and welding OFF
The bobbin area is heated so that the welding
wire is not damp when welding .
Gasflow control
A = Controlling gas flow.
B = Gas flow meter
GB
-- 1 9 --
bm46d1ea
6.3 Wire feed pressure
Start by making sure that the wire moves smoothly through the wire guide. Then
set the pressure of the wire feeders pressure rollers. It is important that the
pressure is not too great.
Fig 1 Fig 2
To check that the feed pressure is set correctly, you can feed out the wire against
an insulated object, e.g. a piece of wood.
When you hold the gun approx. 5 mm from the piece of wood (fig. 1) the feed
rollers should slip.
If you hold the gun approx. 50 mm from the piece of wood, the wire should be
fed out and bend (fig. 2).
6.4 Replacing and inserting wire
S Open the side panel.
S Disconnect the pressure sensor by folding it backwards, the pressure rollers
slide up.
S Straighten out the new wire 10--20 cm. File away burrs and sharp edges from the
end of the wire before inserting it into the wire feed unit.
S Make sure that the wire goes properly into the feed roller’s track and into the
outflow nozzle or wire guide.
S Secure the pressure sensor.
S Close the side panel.
6.5 Changing feed rollers
S Open the side panel.
S Disconnect the pressure sensor (1) by folding it
backwards, the pressure rollers slide up.
S Disconnect the pressure rollers (2) by turning the
axle (3) 1/4 turn clockwise and pulling out the axle.
The pressure rollers disconnect.
S Disconnect the feed rollers (4) by unscrewing the
nuts (5) and pulling out the rollers.
During installation, repeat the above in reverse order.
Choice of track in the feed rollers
Turn the feed roller with the dimensioning mark for the required
track towards you.
GB
-- 2 0 --
bm46d1ea
7 MAINTENANCE
Regular maintenance is important for safe, reliable operation.
Note!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.
7.1 Inspection and cleaning
Wire feed un it
Check r egularly that the wire feed unit is not clogged with dirt.
S Cleaning and replacement of the wire feed unit mechanism’s worn parts should
take place at regular intervals in order to achieve trouble--free wire feed. Note
that if pre--tensioning is set too hard, this can r esult in abnormal wear on the
pressure roller, feed roller and wire guide.
The brake hub
The hub is adjusted when delivered.
S Adjust the brake hub so that wire is slightly slack when wire
feed stops.
Weldin g gun
S Cleaning and replacement of the welding gun’s wear parts should take place at
regular intervals in order to achieve trouble--free wire feed. Blow the wire guide
clean regularly and clean the contact tip.
8 ORDERING SPARE PARTS
YardFeed 2000 is designed and tested in accordance with the international and Euro-
pean standards IEC/EN 60974--5 and EN 60974--10. It is the obligation of the service
unit which has carried out the service or repair work to make sure that the product still
conforms to the said standard.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
GB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

ESAB YardFeed 2000, Origo™ YardFeed 2000, Aristo® YardFeed 2000 Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente
Questo manuale è adatto anche per