Siemens ET975LVV1M Manuale utente

Marca: Siemens

Modello: ET975LVV1M

Categoria: Piani cottura

Tipo: Manuale utente

ET9..LVV1.

Hob

[en] Instruction manual

2 Ø = cm

(7/99























[

Table of contents

enI nst r uct i on manual

8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

( Important safety information . . . . . . . . . . . . . . . 4

] Causes of damage . . . . . . . . . . . . . . . . . . . . . . . . 5

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

7 Environmental protection . . . . . . . . . . . . . . . . . . 5

Energy-saving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Environmentally-friendly disposal . . . . . . . . . . . . . . . . . 5

* Getting to know your appliance . . . . . . . . . . . . . 6

The control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

The hotplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Residual heat indicator. . . . . . . . . . . . . . . . . . . . . . . . . 7

1 Operating the appliance . . . . . . . . . . . . . . . . . . . 7

Switching the hob on and off . . . . . . . . . . . . . . . . . . . . 7

Setting a hotplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Table of cooking times. . . . . . . . . . . . . . . . . . . . . . . . . 8

c Frying Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Pans for the sensor frying system . . . . . . . . . . . . . . . . 9

The frying settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting the sensor frying system . . . . . . . . . . . . . . . . . 9

Switching off the sensor frying system . . . . . . . . . . . . . 9

Frying table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

v PowerBoost function . . . . . . . . . . . . . . . . . . . . . 10

Switching on PowerBoost. . . . . . . . . . . . . . . . . . . . . . 10

Switch off PowerBoost . . . . . . . . . . . . . . . . . . . . . . . . 11

A Childproof lock. . . . . . . . . . . . . . . . . . . . . . . . . . 11

Switching the childproof lock on and off . . . . . . . . . . 11

Automatic childproof lock . . . . . . . . . . . . . . . . . . . . . 11

O Time-setting options . . . . . . . . . . . . . . . . . . . . . 11

Automatic hotplate switch-off . . . . . . . . . . . . . . . . . . . 11

Automatic timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Kitchen timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Stopwatch function. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

b Automatic safety cut-out . . . . . . . . . . . . . . . . . . 12

z Keep warm function. . . . . . . . . . . . . . . . . . . . . . 12

Switching on the Keep warm function . . . . . . . . . . . . 12

Switching off the Keep warm function . . . . . . . . . . . . 12

k Wipe protection . . . . . . . . . . . . . . . . . . . . . . . . . 12

[ Energy consumption indicator . . . . . . . . . . . . . 13

Q Basic settings. . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Changing the basic settings. . . . . . . . . . . . . . . . . . . . 13

o Home Connect . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Home Connect settings . . . . . . . . . . . . . . . . . . . . . . .15

Software update . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

About data protection . . . . . . . . . . . . . . . . . . . . . . . . .17

Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . .17

e Hood connection . . . . . . . . . . . . . . . . . . . . . . . . 18

Setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Resetting connection . . . . . . . . . . . . . . . . . . . . . . . . .19

Control the hood via the hob . . . . . . . . . . . . . . . . . . .19

Hood control settings . . . . . . . . . . . . . . . . . . . . . . . . .19

D Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Hob surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

3 Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . 20

E-report in the displays . . . . . . . . . . . . . . . . . . . . . . . .21

4 Customer service . . . . . . . . . . . . . . . . . . . . . . . . 21

E number and FD number . . . . . . . . . . . . . . . . . . . . .21

E Test dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Produktinfo

Additional information on products, accessories,

replacement parts and services can be found at

www.siemens-home.bsh-group.com and in the online

shop www.siemens-home.bsh-group.com/eshops

en Intended use

8Intended use

Intended use

Read these instructions carefully. Please keep

the instruction and installation manual, as well

as the appliance certificate, in a safe place for

later use or for subsequent owners.

Check the appliance for damage after

unpacking it. Do not connect the appliance if it

has been damaged in transport.

Only a licensed professional may connect

appliances without plugs. Damage caused by

incorrect connection is not covered under

warranty.

This appliance is intended for private domestic

use and the household environment only. The

appliance must only be used for the

preparation of food and beverages. The

cooking process must be supervised. A short

cooking process must be supervised without

interruption. Only use the appliance in

enclosed spaces.

This appliance is intended for use up to a

maximum height of 2000 metres above sea

level.

This appliance may be used by children over

the age of 8 years old and by persons with

reduced physical, sensory or mental

capabilities or by persons with a lack of

experience or knowledge if they are

supervised or are instructed by a person

responsible for their safety how to use the

appliance safely and have understood the

associated hazards.

Children must not play with, on, or around the

appliance. Children must not clean the

appliance or carry out general maintenance

unless they are at least 15 years old and are

being supervised.

Keep children below the age of 8 years old at

a safe distance from the appliance and power

cable.

(Important safety

information

Impor t ant saf et y informat i on

:Warning – Risk of fire!

■ Hot oil and fat can ignite very quickly. Never

leave hot fat or oil unattended. Never use

water to put out burning oil or fat. Switch off

the hotplate. Extinguish flames carefully

using a lid, fire blanket or something similar.

Risk of fire!

■ The hotplates become very hot. Never

place combustible items on the hob. Never

place objects on the hob.

Risk of fire!

■ The appliance gets hot. Do not keep

combustible objects or aerosol cans in

drawers directly underneath the hob.

Risk of fire!

■ The hob switches off automatically and can

no longer be operated. It may switch on

unintentionally at a later point. Switch off the

circuit breaker in the fuse box. Contact the

after-sales service.

Risk of burns!

■ Do not use hob covers here.They can

cause accidents, for example due to

overheating, catching fire or materials

shattering.

:Warning – Risk of burns!

■ The hotplates and surrounding area

(particularly the hob surround, if fitted)

become very hot. Never touch the hot

surfaces. Keep children at a safe distance.

Risk of burns!

■ The hotplate heats up but the display does

not work. Switch off the circuit breaker in

the fuse box. Contact the after-sales

service.

Risk of burns!

■ It is only allowed to use safety devices, e.g.

hob guards, which have been approved by

ourselves. Unsuitable safety devices or hob

guards may result in accidents.

:Warning – Risk of electric shock!

■ Incorrect repairs are dangerous. Repairs

may only be carried out and damaged

power cables replaced by one of our

trained after-sales technicians. If the

appliance is defective, unplug the appliance

from the mains or switch off the circuit

breaker in the fuse box. Contact the after-

sales service.

Risk of electric shock!

■ Do not use any high-pressure cleaners or

steam cleaners, which can result in an

electric shock.

Risk of electric shock!

■ A defective appliance may cause electric

shock. Never switch on a defective

appliance. Unplug the appliance from the

mains or switch off the circuit breaker in the

fuse box. Contact the after-sales service.

Risk of electric shock!

■ Cracks or fractures in the glass ceramic

may cause electric shocks. Switch off the

circuit breaker in the fuse box. Contact the

after-sales service.

Causes of damage en

:Warning – Risk of injury!

Saucepans may suddenly jump due to liquid

between the pan base and the hotplate.

Always keep the hotplate and saucepan bases

dry.

]Causes of damage

Causes of damage

Caution!

■ Rough pot and pan bases scratch the ceramic.

■ Avoid boiling pots dry. This may cause damage.

■ Never place hot pots or pans on the control panel,

the display area or the surround. This may cause

damage.

■ Damage can occur if hard or pointed objects fall on

the hob.

■ Aluminium foil and plastic containers melt on hot

hotplates. Oven protective foil is not suitable for your

hob.

Overview

You will find the most frequently caused damage in the

following table.

7Environmental protection

En v i r o n ment al pr ot ec t i on

In this section, you can find information about saving

energy and disposing of the appliance.

Energy-saving tips

■ Always place suitable lids on saucepans. When

cooking without a lid, considerably more energy is

required. A glass lid means that you can see inside

without having to lift the lid.

■ Use pots and pans with even bases. Uneven bases

increase energy consumption.

■ The diameter of pot and pan bases should be the

same size as the hotplate. In particular, small

saucepans on the hotplate cause energy losses.

Please note: cookware manufacturers often indicate

the upper diameter of the saucepan. This is usually

bigger than the diameter of the base of the pan.

■ Use a small saucepan for small quantities. A larger,

less full saucepan requires a lot of energy.

■ Cook with only a little water. This will save energy.

Vitamins and minerals in vegetables are preserved.

■ Always cover as large an area of the hotplate as

possible with your saucepan.

■ Switch to a lower heat setting in good time.

■ Select a suitable ongoing cooking setting. You will

waste energy by using an ongoing cooking setting

which is too high.

■ Use the residual heat of the hob. For longer cooking

times, you can switch the hotplate off 5-10 minutes

before the end of the cooking time.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly

manner.

Damage Cause Measure

Stains Boiled over food Remove boiled over food imme-

diately with a glass scraper.

Unsuitable clean-

ing agents

Only use cleaning agents that

are suitable for glass ceramic.

Scratches Salt, sugar and

sand

Do not use the hob as a work

surface or storage space.

Rough pot and

pan bases

scratch the

ceramic.

Check your cookware.

Discolouration Unsuitable clean-

ing agents

Only use cleaning agents that

are suitable for glass ceramic.

Pan abrasion (e.g.

aluminium)

Lift pots and pans when moving

them.

Blisters Sugar, food with a

high sugar con-

tent

Remove boiled over food imme-

diately with a glass scraper.

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning

used electrical and electronic appliances

(waste electrical and electronic equipment -

WEEE). The guideline determines the

framework for the return and recycling of used

appliances as applicable throughout the EU.

en Getting to know your appliance

*Getting to know your

appliance

Get t i ng to know your appl i ance

The instruction manual is the same for various different

hobs. You can find the hob dimensions in the overview

of models. ~ Page 2

The control panel

Notes

■ Depending on the operating condition of the hob the

controls which can currently be selected light up

brightly or dimmed. If you touch them, the relevant

function is activated.

■ The controls which cannot currently be selected do

not light up.

■ The settings of the hotplates currently selected light

up brightly.

■ Always keep the controls dry. Moisture reduces their

effectiveness.

■ Do not pull pans close to the displays and sensors.

The electronics could overheat.

The hotplates

Notes

■ Any dark areas in the glow pattern of the hotplate

are due to technical reasons. The function of the

hotplate is not affected.





 



Indica-

tors/sym-

bols

‚-Š

Heat settings

•/œ

Residual heat

›

PowerBoost function

–

Keep-warm function

‰‰

Timer

Wi-Fi

Controls

Main switch

Child safety lock

Wipe protection

Fan setting hood

b PowerBoost function

Hotplate selection

0IIIIIIIIIIIII Control panel*

Keep-warm function

Lighting hood

Sensor frying system

Activating the dual-circuit hotplate

Activating the tri-circuit hotplate

Activating the bridge heating element

Timer

‰

Stopwatch function

*The middle hotplate is adjusted on the right-hand control panel

Hotplate Activating and deactivating

Single-circuit hot-

plate

Dual-circuit hotplate

Touch the ð symbol

Tri-circuit hotplate

Touch the ðsymbol; the 2nd filament

circuit is activated

Touch the ò symbol; the 2nd and 3rd

filament circuit are activated

When the hotplate is activated: the corresponding indicator lights up

Operating the appliance en

■ Hotplate temperature is regulated by the heat

switching on and off.The heat may also switch on

and off at the highest setting.

This ensures e.g.:

– sensitive components are protected from

overheating

– the appliance is protected from electrical

overload

– better cooking results are achieved

■ With multi-circuit hotplates the heater elements of the

inner filament circuits and the heater element of the

activations may switch on and off at different times.

â Hotplates with bridge heating element

Two individual hotplates can be interconnected with a

bridge heating element to create one large extended

cooking zone.

With normal operation these hotplates both work as

normal single-circuit and dual-circuit hotplates.

Activating the bridge heating element:

■ When both hotplates are switched off, touch the ç

symbol. ‹ appears in the heat setting display. Select

the required heat setting in the control panel.

■ When one of the hotplates is switched on, touch the

ç symbol. The selected heat setting is adopted.

■ When both hotplates are switched on, touch the ç

symbol. ‹ appears in the heat setting display. Select

the required heat setting in the control panel.

To deactivate the extended cooking zone: touch the ç

symbol again. The display goes out. The extended

cooking zone is deactivated.

Note: If you activate the extended cooking zone, the

outer filament circuit of the dual-circuit hotplate is

automatically deactivated.

Residual heat indicator

The hob has a two-stage residual heat indicator for

each hotplate.

If • appears in the display the hob is still hot. It may be

used, for example, to keep a small meal warm or to

melt cooking chocolate. As the hotplate cools down

further, the display changes to œ. The display remains lit

until the hotplate has cooled sufficiently.

1Operating the appliance

Oper at i ng the appl i ance

In this section, you can find out how to set the

hotplates. The table shows heat settings and cooking

times for various meals.

Switching the hob on and off

The main switch is used to switch the hob on and off.

Switching on the appliance

Touch the # symbol. A signal sounds. The indicator

light above the main switch lights up. The control

displays and the heat setting displays ‹ light up. The

hob is ready for use.

The two front hotplates are automatically selected. The

‹ heat setting displays light up brightly.

Switching off the appliance

Touch the

# symbol until the indicator light above the

main switch and the displays go out. All hotplates are

switched off. The residual heat indicator remains on

until the hotplates have cooled down sufficiently.

Notes

■ The hob will switch itself off automatically once all

hotplates have been switched off for a while (10-

60 seconds).

■ The settings remain stored for 4 seconds after the

hob has been switched off. If you switch it on again

during this time, the hob will operate using the

previously stored settings.

Setting a hotplate

Select the desired heat setting on the control panel.

Heat setting 1 = Lowest power

Heat setting 9 = Highest power

Every heat setting has an intermediate setting. It

appears on the display, e.g. as ….†.

Selecting the heat setting

The hob must be on.

1. Touch the ‹ heat setting display to select the

hotplate.

‹ lights up brightly on the heat setting display

2. Select the required heat setting on the control panel.

The hotplate is switched on.

en Operating the appliance

Changing the heat setting:

Select the hotplate and set the required heat setting on

the control panel.

Switching off the hotplate

Select the hotplate. Set the control panel to 0. After

about 10 seconds, the residual heat indicator appears.

Note: The last selected hotplate remains activated. You

can set the hotplate without selecting it again.

Table of cooking times

The following table provides some examples.

Cooking times and heat settings may vary depending

on the type of food, its weight and quality. Deviations

are therefore possible.

For bringing liquids to the boil, use heat setting 9.

Stir thick liquids occasionally.

Food that needs to be seared quickly or food which

loses a lot of liquid during initial frying is best seared in

several small portions.

Tips for energy-saving cooking can be found in the

Environmental protection section.~ Page 5

Ongoing

cooking set-

ting

Ongoing cook-

ing time in

minutes

Melting

Chocolate coating 1-1.5 -

Butter, honey, gelatine 1-2 -

Heating and keeping warm

Stew (e.g. lentil stew) 1-2 -

Milk** 1.5-2.5 -

Heating sausages in water** 3-4 -

Defrosting and heating

Frozen spinach 2.5-3.5 10-20 min

Frozen goulash 2.5-3.5 20-30 min

Poaching, simmering

Dumplings 4.5-5.5* 20-30 min

Fish 4-5* 10-15 min

White sauces, e.g. béchamel

sauce

1-2 3-6 min

Whisked sauces, e.g. sauce Béar-

naise, hollandaise

3-4 8-12 min

Boiling, steaming, braising

Rice (with double the quantity of

water)

2-3 15-30 min

Rice pudding 1.5-2.5 35-45 min

Unpeeled boiled potatoes 4-5 25-30 min

* Ongoing cooking without a lid

** Without lid

*** Turn frequently

Boiled potatoes 4-5 15-25 min

Pasta, noodles 6-7* 6-10 min

Stew, soups 3.5-4.5 15-60 min

Vegetables 2.5-3.5 10-20 min

Frozen vegetables 3.5-4.5 10-20 min

Cooking in a pressure cooker 4-5 -

Braising

Roulades 4-5 50-60 min

Pot roast 4-5 60-100 min

Goulash 2.5-3.5 50-60 min

Frying with little oil**

Escalope, plain or breaded 6-7 6-10 min

Escalope, frozen 6-7 8-12 min

Chop, plain or breaded*** 6-7 8-12 min

Steak (3 cm thick) 7-8 8-12 min

Hamburger, rissoles (3 cm

thick)***

4.5-5.5 30-40 min

Poultry breast (2 cm thick)*** 5-6 10-20 min

Poultry breast, frozen*** 5-6 10-30 min

Fish and fish fillet, plain 5-6 8-20 min

Fish and fish fillet, breaded 6-7 8-20 min

Fish and fish fillet, breaded and

frozen, e.g. fish fingers

6-7 8-12 min

Scampi and prawns 7-8 4-10 min

Sautéing vegetables, fresh mush-

rooms

7-8 10-20 min

Vegetables, meat in Asian-style

strips

7.5-8.5 15-20 min

Stir fry, frozen 6-7 6-10 min

Pancakes 6-7 consecutively

Omelette 3.5-4.5 consecutively

Fried eggs 5-6 3-6 min

Deep-fat frying (150-200 g per

portion continuously in 1-2 li-

tres oil**)

Frozen products, e.g. chips,

chicken nuggets

8-9 -

Croquettes, frozen 7-8 -

Meat, e.g. chicken portions 6-7 -

Fish, breaded or battered 5-6 -

Vegetables, mushrooms, breaded

or battered, tempura

5-6 -

Small baked items, e.g. ring

doughnuts/jam-filled doughnuts,

fruit in batter

4-5 -

Ongoing

cooking set-

ting

Ongoing cook-

ing time in

minutes

* Ongoing cooking without a lid

** Without lid

*** Turn frequently

Frying Sensor en

cFrying Sensor

Fr y i n g Sens or

The tri-circuit hotplate marked with the Õ symbol has

a sensor frying function. If you operate the hotplate with

the sensor frying system, a sensor regulates the

temperature of the pan.

The 2nd filament circuit in the tri-circuit hotplate is

activated when setting the sensor frying function.

Your advantage when frying:

■ The hotplate only heats up when necessary. This will

save energy.

■ Oil and fat do not overheat.

Notes

■ Never leave fat unattended while you are heating it.

■ Put the pan in the centre of the hotplate. Make sure

that the base of the pan has the correct diameter.

■ Do not place a lid on the pan, otherwise the

regulator will not work. You can use a splatter guard.

It will not prevent the regulator from working.

■ Only use fat that is suitable for frying. For butter,

margarine, extra virgin olive oil or lard, select the

frying setting 1 or 2.

Pans for the sensor frying system

Select the right pan when using the sensor frying

system.

System pans as optional accessories

You can also purchase a frying pan which is ideally

suited to frying using the sensor frying system from your

specialist electrical retailer or at www.siemens

eshop.com: HZ390230

Both availability and whether it is possible to order

online differ between countries.

The frying settings given below have been adjusted to

the system pans.

Note: The sensor frying system may also work with

other pans. Test the pans first with low frying settings,

changing as necessary. The pans may overheat on high

frying settings.

The frying settings

Setting the sensor frying system

Select the appropriate frying setting from the table. Put

the pan on the hotplate.

The hob must be switched on.

1. Touch the Õ symbol. ‹ lights up in the hotplate

display and the Ý symbol appears.

2. Select the required frying setting on the control

panel. The sensor frying system is activated. The

2nd filament circuit in the tri-circuit hotplate is

automatically switched on.

Ý symbol flashes until the frying temperature is

reached. Then a signal sounds. Ý symbol is lit.

3. Add the fat and then add the food to the pan.

Turn as you normally would to prevent burning.

Switching off the sensor frying system

Touch the Õ symbol.

Frying table

The table shows which frying setting is suitable for

which dish. The frying time may depend on the type,

weight, thickness and quality of the food.

The frying settings given are for the system pans. The

frying settings may vary if you use different pans.

First heat the empty pan. Only add the food with the fat

to the pan when the signal sounds.

Frying

setting

Temperature Suitable for

1 very low e.g. cooking and reducing sauces, steam-

ing vegetables without adding water and

with added fat, frying food with extra vir-

gin olive oil, butter or margarine

2 low e.g. omelettes, frying food with extra virgin

olive oil, butter or margarine

3 low - medium e.g. frying fish, thick food such as rissoles

and sausages

4 medium - high e.g. frying steak medium or well done, fro-

zen breaded products, thin food such as

escalopes, strips of meat and vegetables

5 high e.g. frying steak rare, potato fritters and

fried potatoes

Frying

setting

Temperature Suitable for



en PowerBoost function

vPowerBoost function

Po we r Boo s t function

PowerBoost lets you heat up large volumes of water

even faster than on heat setting 9.

PowerBoost is only available on hotplates marked with

the boost symbol.

With dual-circuit hotplates the second filament circuit

has to be activated for use with the PowerBoost

function.

Switching on PowerBoost

1. Select the hotplate.

2. Touch the b symbol. The › display lights up.

The PowerBoost function is switched on.

Frying

setting

Total frying time after

the signal sounds

Meat

Escalope, plain or breaded 4 6-10 min

Fillet 4 6-10 min

Chop* 3 10-17 min

Cordon bleu* 3 15-20 min

Steaks, rare (3 cm thick) 5 6-8 min

Steaks medium or well done

(3 cm thick)

4 8-12 min

Poultry breast (2 cm thick)* 3 10-20 min

Sausages, pre-boiled or raw* 3 8-20 min

Hamburgers (1.5 cm thick)** 3 6-30 min

Rissoles (2 cm thick)** 3 10-20 min

Strips of meat, gyros 4 7-12 min

Minced meat 4 6-10 min

Bacon 2 5-8 min

Fish

Fish, fried, e.g. trout 3 10-20 min

Fish fillet, plain or breaded 3/4 10-20 min

Scampi, prawns 4 4-8 min

Egg dishes

Pancakes 4 continuous frying

Omelettes 2 3-6 min (per portion)

Fried egg 2/4 2-6 min

Scrambled egg 2 4-9 min

Shredded raisin pancake 3 10-15 min

French toast 3 4-8 min (per portion)

Potatoes

Fried potatoes, boiled in their

skin

5 6-12 min

Fried potatoes, made from raw

potatoes

3 15-25 min

Potato fritter 5 2.5-3.5 min (per por-

tion)

Rösti 2 40-45 min

Glazed potatoes 4 10-15 min

Vegetables

Sweat garlic / onions until

transluscent

1/2 2-10 min

Fried onions 3 5-10 min

Courgettes, aubergines 3 4-12 min

Peppers, green asparagus 3 4-15 min

Steaming vegetables with

added fat and without adding

water, e.g. courgettes, green

peppers

1 10-20 min

* Turn frequently

** Place in a cold pan

Mushrooms 4 10-15 min

Glazed vegetables 4 6-10 min

Frozen products

Escalope 4 15-20 min

Cordon bleu 3 10-30 min

Poultry breast * 2 10-30 min

Chicken nuggets* 4 10-20 min

Gyros, kebab 4 10-15 min

Fish fillet, plain or breaded 3 10-20 min

Fish fingers 4 8-12 min

Chips 4/5 4-6 min

Stir fries / stir-fried vegetables 4 8-15 min

Spring rolls 3 10-30 min

Camembert/cheese 3 10-15 min

Sauces

Tomato sauce with vegetables 1 25-35 min

Béchamel sauce 1 10-20 min

Cheese sauce, e.g. Gorgonzola

sauce

1 10-20 min

Reducing sauces, e.g. tomato

sauce, Bolognese sauce

1 25-35 min

Sweet sauces, e.g. orange

sauce

1 15-25 min

Miscellaneous

Camembert/cheese 3 7-10 min

Dried ready meals to which you

add water, e.g. pasta with

sauce*

2 4-6 min

Croutons 3 6-10 min

Toasting almonds / other nuts /

pine nuts**

2 3-7 min

Frying

setting

Total frying time after

the signal sounds

* Turn frequently

** Place in a cold pan

Childproof lock en

Switch off PowerBoost

1. Select the cooking zone.

2. Select any ongoing cooking setting. The › display

goes out.

PowerBoost is switched off.

Notes

■ If you do not turn off the PowerBoost function, it

switches off automatically after a certain period of

time. The hotplate switches back to the heat setting

■ Please remember that oil and fat heat up quickly with

PowerBoost. Never leave the hob unattended. Oil

and fat that have overheated will catch fire quickly,

see section "Important safety information".~ Page 4

AChildproof lock

Childproof lock

You can use the childproof lock to prevent children

from switching on the hob.

Switching the childproof lock on and off

The hob must be switched off.

To switch on: Switch on the hob using the main switch

#. Touch the # symbol for 4 seconds. The ‚ display

lights up for 10 seconds. The hob is locked.

To switch off: Switch on the hob using the main switch

#. Touch the # symbol for 4 seconds. The lock is

released.

Automatic childproof lock

This function automatically activates the childproof lock

every time you switch the hob off.

Switching on and off

Find out how to switch the automatic childproof lock on

and off in the Basic settings section.~ Page 13

OTime-setting options

Ti me- set t i ng opt i ons

There are 3 different time-setting options:

■ A hotplate should switch off automatically

■ Kitchen timer

■ Stopwatch

Automatic hotplate switch-off

Enter a cooking time for the relevant hotplate. When the

cooking time has elapsed, the hotplate switches off

automatically.

Setting the cooking time

The hotplate must be switched on.

1. Touch the symbol 0 2 and then select the hotplate.

The x display lights up. ‹‹ minlights up in the

timer display.

2. Touch the desired presetting in the settings range.

The possible presetting from left to right is 1, 2, 3,

etc. to 9 minutes. Within 10 seconds, slide your

finger along the settings range repeatedly until the

desired cooking time is reached.

The cooking time counts down. If you have set a

cooking time for more than one hotplate, the shortest

cooking time is always displayed.

Sensor frying system

When you cook with the sensor frying system, the set

cooking time only begins when the temperature for the

selected area is reached.

Automatic setting

If you touch settings range presets 1 to 5 for a longer

time, the cooking time automatically counts back down

to one minute.

If you touch settings range presets 6 to 9 for a longer

time, the cooking time automatically counts up to 99

minutes.

When the time has elapsed,

When the cooking time has elapsed, the hotplate

switches off. You will hear an audible signal and

‹‹lights up in the display for 10 seconds. The indicator

x flashes. Touch any symbol. The displays go out and

the audible signal ceases.

Changing or cancelling the cooking time

Touch the symbol 0 2 and then select the hotplate.

Change the cooking time or set to ‹‹ in the settings

range.

Notes

■ You can set a cooking time of up to 99 minutes.

■ If the cooking time has counted down to the last

minute, the timer display changes from minutes to

seconds.



PLQ

[



PLQ

[

en Automatic safety cut-out

Automatic timer

You can use this function to preselect a cooking time

for all hotplates. Each time a hotplate is switched on,

the pre-selected cooking time then counts down. When

the cooking time has elapsed, the hotplate switches off

automatically.

You can find out how to switch on the automatic timer in

the Basic settings section.~ Page 13

Note: You can change the cooking time for a hotplate

or switch off the automatic timer for the hotplates:

Touch the symbol 0 2 and then select the hotplate.

Change the cooking time or set to ‹‹ in the settings

range.

Kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes. It runs independently of all the other settings.

To activate it the hob must be on.

Setting the kitchen timer

1. Touch the 0 symbol, the V display lights up. ‹‹

min lights up in the timer display.

2. Set the desired time in the settings range.

The timer starts counting down after a few seconds.

When the time has elapsed,

When the time has elapsed, you will hear an audible

signal and ‹‹lights up in the display for 10 seconds.

The indicator V flashes. Touch any symbol. The

displays go out and the audible signal ceases.

Setting the correct time

Use the 0 symbol to select the kitchen timer and reset

the time.

Stopwatch function

The stopwatch function displays the time that has

passed since activating the function.

The stopwatch function only works when the hob is

switched on. When the hob is switched off, the

stopwatch function is switched off as well.

The stopwatch function is switched on by touching the

þ symbol. ‹‹ appears in the timer display and timing

starts. Seconds are displayed during the first minute,

and then minutes.

The stopwatch function is switched off by touching the

þ symbol again. The timer display goes out.

Note: If another time-setting option is selected in

addition to the stopwatch function, the setting appears

in the timer display for 10 seconds. The stopwatch

function is then displayed again.

bAutomatic safety cut-out

Au t o mat i c saf et y cut - out

If a hotplate has been switched on for a long time

without the setting being changed, the automatic time

limit is activated.

The hotplate stops heating. ”‰ and the •/œ residual

heat indicator flash alternately on the hotplate display.

The display goes out when you touch any control. You

can make new settings.

When the time limit is activated depends on the heat

setting selected (1 to 10 hours).

zKeep warm function

Ke e p wa r m function

The Keep warm function is suitable for melting

chocolate or butter and for warming food and cookware

Switching on the Keep warm function

1. Touch the è symbol

2. Select the hotplate. – lights up on the heat setting

display.

The Keep warm function is switched on.

Switching off the Keep warm function

1. Touch the è symbol.

2. Select the hotplate. ‹ lights up on the heat setting

display.

The Keep warm function is switched off.

kWipe protection

Wipe pr ot ect i on

If you wipe over the control panel while the hob is

switched on, settings may be altered.

To prevent this from happening, your hob has a wipe

protection function. Touch the # symbol. An audible

signal sounds. The # symbol lights up. The control

panel is locked for 30 seconds. You can now wipe over

the control panel without altering any settings.

Note: The main switch is excluded from the wipe

protection function. You can switch off the hob at any

time.

Energy consumption indicator en

[Energy consumption

indicator

Ener gy consumpt i on indicator

You can use this function to have the total energy

consumption between switching the hob on and off

displayed.

Once switched off, the consumption in kilowatt hours

(e.g. 1.87 kWh) is displayed for 10 seconds

The accuracy of the display depends, amongst other

things, on the voltage quality of the power supply.

The display has not been activated. You can find out

how to activate the display in the Basic settings

section.~ Page 13

QBasic settings

Ba s i c s et t i ngs

Your appliance has various basic settings. You can

adapt these settings to suit your own needs.

Changing the basic settings

The hob must be switched off.

1. Switch on the hob.

2. Within the next 10 seconds, touch and hold the 0

symbol for 4 seconds.

The after-sales index will be displayed to begin with.You

can scroll through all the different information from the

setting area:

3. Touch the 0 symbol again

™‚ will appear and ‹ will be lit on the hotplate display.

4. Touch the 0 symbol repeatedly until the required

indicator appears.

Display

screen

Function

™‚

Automatic childproof lock

‹

Switched off.*

‚

Switched on.

Manual and automatic childproof lock switched off.

™ƒ

Audible signal

‹

Confirmation signal and operation error signal are

switched off (main switch signal always remains).

‚

Only the operation error signal is switched on.

Only the confirmation signal is switched on.

„

Confirmation signal and operation error signal switched

on.*

™„

Energy consumption display (Ask your electricity

supply company what the mains voltage is)

‹

Consumption display switched off.*

‚

Consumption display with mains voltage at 230 V.

Consumption display with mains voltage at 400 V.

„

Consumption display with mains voltage at 220 V.

…

Consumption display with mains voltage at 240 V.

*Basic setting

™†

Automatic timer

‹‹

Switched off.*

‹‚-ŠŠ

Cooking time, after which the hotplates switch off.

™‡

Duration of the timer end signal

‚

10 seconds.*

30 seconds

„

1 minute.

™ˆ

Activation of the heating elements

‹

Switched off.

‚

Switched on.

Last setting before the hotplate was switched off.*

™‹

Reset the basic settings

‹

Switched off.*

‚

Switched on.

Information

screen

After-sales service index (KI)

‹‚

Manufacturing date

”š

Year of manufacture

‚†.

Month of manufacture

‹.†

Display

screen

Function

*Basic setting



en Home Connect

5. Set the value you require in the setting area.

6. Touch and hold the 0 symbol for 4 seconds.

The setting is now activated.

Switching off

To exit the basic setting, switch off the hob with the

main switch and make new settings.

oHome Connect

Ho me Connec t

This appliance is WLAN-enabled and settings can be

sent to the appliance via a mobile device.

If the appliance is not connected to the home network,

the appliance functions in the same way as a hob with

no network connection. The hob can always be

operated via the control panel.

The availability of the Home Connect function depends

on the availability of Home Connect services in your

country. Home Connect services are not available in

every country.You can find more information on this at

www.home-connect.com.

Notes

■ Hobs are not designed to be used unattended - you

must always keep an eye on the cooking process.

■ Ensure that you follow the safety instructions in this

instruction manual and that these are also observed

when operating the appliance via the Home Connect

app. You must also follow the instructions in the

Home Connect app.~ "Important safety

information" on page 4

■ Using the Home Connect app, you can send settings

to your appliance and then have to confirm them on

the appliance. It is not possible to operate the

appliance whilst you are away from home.

■ Operation on the appliance always has priority.

During this time, it is not possible to operate the

appliance using the Home Connect app.

Setting up

To implement settings via Home Connect, you must

have installed and set up the Home Connect app on

your mobile device.

Observe the Home Connect documents supplied for

this.

Follow the steps specified by the app to make the

settings.

The app must be open in order to perform the setup

process.

Automatic registration in the home network

You require a router that has WPS functionality.

You require access to your router.If you do not have

this, follow the steps for "Manual registration in the

home network".

1. Switch on the hob.

2. Touch the 0 symbol for 4 seconds.

Product information will be displayed.

3. Touch the 0 symbol repeatedly until the •’‚

setting appears.

‹ lights up on the cooking position display.

4. Set the ‚ value on the control panel.

‚ and the D symbol will flash on the cooking

position display.

5. Press the WPS button on the router within the next

2 minutes.

The hob is connected to the home network if the

D symbol no longer flashes but is lit up on the

cooking position display.

The appliance automatically tries to connect to the

app and the •’ƒ setting appears.The ‚ value

flashes on the control panel.

6. Start the app on the mobile device and follow the

instructions for automatic network registration.

The registration procedure has been completed once

the ‹ value appears on the cooking position display.

Manual registration in the home network

1. Switch on the hob.

2. Touch the 0 symbol for 4 seconds.

Product information will be displayed.



Home Connect en

3. Touch the 0 symbol repeatedly until the •’‚

setting appears.

‹ lights up on the cooking position display.

4. Set the ƒ value on the control panel.

ƒ and the D symbol will flash on the cooking

position display.

5. Use the "Home Connect" SSID and the "Home

Connect" key to register the mobile device on the

hob network.

The hob is connected to the home network if the

D symbol no longer flashes but is lit up on the

cooking position display.

The appliance automatically tries to connect to the

app and the •’ƒ setting appears.The ‚ value

flashes on the control panel.

6. Start the app on the mobile device and follow the

instructions for manual network registration.

The registration procedure has been completed once

the ‹ value appears on the cooking position display.

Home Connect settings

You can adjust Home Connect to suit your

requirements at any time.

In the basic settings for your hob, navigate to the Home

Connect settings to display network and appliance

information.



Symbol Function

•’‚

Registration in the home network (WLAN)

‹

Not connected /disconnect network.

‚

Connect automatically.

Connect manually.

„

Connected.

•’ƒ

Connection to app

‹

Not connected.

‚

Connect.

•’„

Connect to WLAN

‹

Radio module switched off.

‚

Radio module switched on.

•’…

Settings via app

‹

Switched off.

‚

Switched on.*

•’†

Software update

‚

Update available and ready for installation.

Starting installation.

•’‡

Remote access by Customer Service

‹

Not permitted.

‚

Permitted.

•’ˆ

WLAN signal strength

‹

Not connected to home network (WLAN).

‚

Signal strength 1 (poor)

Signal strength 2 (moderate)

* Basic setting



en Home Connect

Notes

■ The •’ƒ setting is only displayed if the appliance is

connected to the home network.

■ The •’„ setting is only displayed if the appliance

has once connected to a network.

■ The •’† setting is only displayed if an update is

available.

■ The •’‡ setting is only displayed if Customer

Service is attempting to connect to the appliance.

You can end this at any time after granting access.

■ The •’ˆ and •’‰ settings are only displayed if

there is a connection to WLAN.

Deactivating WLAN

If WLAN is activated, you can use the Home Connect

functions.

Note: In networked standby mode, your appliance

requires max. 2 W.

1. Touch the 0 symbol for 4 seconds.

Product information will be displayed.

2. Touch the 0 symbol repeatedly until the •’„

setting appears.

‚ lights up on the cooking position display.

3. Set the ‹ value on the control panel.

WLAN is deactivated and the D symbol on the control

panel goes out.

Disconnecting from the network

Di sconnect i ng from the net wor k

You can disconnect your hob from the network at any

time.

Note: If your hob is disconnected from the network, it is

not possible to operate it using Home Connect.

1. Touch the 0 symbol for 4 seconds.

Product information will be displayed.

2. Touch the 0 symbol repeatedly until the •’‚

setting appears.

„ lights up on the cooking position display.

3. Set the ‹ value on the control panel.

The appliance is disconnected from the home network

and the D symbol on the control panel goes out.

Connecting to the network

Connect i ng to the net wor k

1. Touch the 0 symbol for 4 seconds.

Product information will be displayed.

2. Touch the 0 symbol repeatedly until the •’‚

setting appears.

‹ lights up on the cooking position display.

3. On the control panel

set the "Connect automatically" ‚ value or

or the "Connect manually" ƒ value.

4. Follow the instructions in the section entitled

"Automatic registration in the home network" or

"Manual registration in the home network".

Connect to the app

If the Home Connect app is installed on your mobile

device, you can connect it to your hob.

Notes

■ The appliance must be connected to the network.

■ The app must be open and be set up.

■ If your extractor hood is directly connected, first

disconnect the hob from your home network and

then initiate the connection process

again.~ "Disconnecting from the network"

on page 16~ "Connecting to the network"

on page 16

1. Touch the 0 symbol for 4 seconds.

The product information will be displayed.

2. Touch the 0 symbol repeatedly until the •’ƒ

setting appears.

‹ will be lit on the hotplate display.

3. Set the value ‚ in the settings area.

4. Follow the instructions in the app to complete the

connection process.

Settings via app

Using the Home Connect app, you can easily access

the basic settings for your hob and send settings for the

cooking positions to the hob.

Notes

■ To change basic settings the hob must be switched

off.

„

Signal strength 3 (good)

•’‰

Connection to Home Connect server

‹

Not connected.

‚

Connected.

Symbol Function

* Basic setting



Home Connect en

■ Operation on the appliance always has priority.

During this time it is not possible to operate the

appliance using the Home Connect app.

■ The transfer of settings is activated when the

appliance is supplied.

■ If the transfer of settings has been deactivated, only

the hob's operating statuses will be displayed in the

Home Connect app.

1. Touch the 0 symbol for 4 seconds.

Product information will be displayed.

2. Touch the 0 symbol repeatedly until the •’…

setting appears.

3. To activate the transfer, select the ‚ value on the

control panel. To deactivate the transfer, select the ‹

value.

Confirming settings

As soon as cooking settings are transmitted to a

cooking zone, the cooking zone display, timer display

or modified function starts, depending on the setting. To

confirm that you want to use these settings, touch the

indicator for the required hotplate. To discard the

settings, touch any other button on the hob.

Software update

Using the software update function, your hob's software

can be updated (e.g. for the purpose of optimisation,

troubleshooting or security updates). To do this, you

need to be a registered Home Connect user, have

installed the app on your mobile device and be

connected to the Home Connect server.

As soon as a software update is available, you will be

informed by the Home Connect app, from which you will

also be able to download the update.

Once the update has been successfully downloaded,

you can start installing it via the hob (basic settings,

•’† setting) or the Home Connect app if you are on

your local area network.

The Home Connect app will notify you once installation

is complete.

Notes

■ You can continue to use your hob as normal while

updates are downloading.

■ Depending on your personal settings in the app,

software updates can also be set to download

automatically.

■ We recommend that you install security updates as

soon as possible.

About data protection

When your appliance is connected for the first time to a

WLAN network, which is connected to the Internet, your

appliance transmits the following categories of data to

the Home Connect server (initial registration):

■ Unique appliance identification (consisting of

appliance codes as well as the MAC address of the

installed WiFi communication module).

■ Security certificate of the WiFi communication

module (to ensure a secure IT connection).

■ The current software and hardware version of your

domestic appliance.

■ Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect

functions for use and is only required when you want to

use these Home Connect functions for the first time.

Note: Ensure that the Home Connect functions can be

used only in conjunction with the Home Connect app.

Information on data protection can be accessed in the

Home Connect app.

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the

appliance which features Home Connect is in

accordance with the basic requirements and the other

relevant provisions of the directive 2014/53/EU.

A detailed RED Declaration of Conformity can be found

online at www.siemens-home.bsh-group.com on the

product page of your appliance with the additional

documents.

2.4 GHz band: max. 100 mW

5 GHz band: max. 100 mW



BE BG CZ DK DE EE IE EL

ES FR HR IT CY LV LT LU

HU MT NL AT PL PT RO SI

SK FI SE UK NO CH TR

5 GHz Wi-Fi: for indoor use only

en Hood connection

eHood connection

Ho o d connect i on

You can connect this appliance to a suitable extractor

hood and then control the functions of the hood via your

hob.

You have various options for connecting the appliances

together:

Home Connect

Two appliances can be connected using the Home

Connect app provided that both of them are Home

Connect-compatible.

Both appliances can be controlled via the app and via

the control panel.

Refer to the Home Connect documents supplied and

the Home Connect section for more information.

~ "Home Connect" on page 14

Connecting appliances directly

If the appliance is connected directly to an extractor

hood, the extractor hood can be controlled via the hob.

It is then not possible for either of the appliances to

connect to your home network or to the app. Both

appliances can be controlled via the control panel.

Connecting appliances via your home network

Use this type of connection if neither or one of the two

appliances is connected to the Home Connect app.

If the appliances are connected to each other via your

home network, you can use both the hood controls and

Home Connect to operate the hob.

Notes

■ Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the

hob.~ "Important safety information" on page 4

■ If the appliance is being operated by means of the

controls on the extractor hood, this mode of

operation always has priority. It is not possible to use

the hood controls on the hob during this time.

■ In networked standby mode, your appliance requires

a maximum of 2 W.

Setting up

To set up the connection between the hob and the

extractor hood, the hob must be switched on.

Connecting directly

Make sure that the extractor hood is switched off.

For more information, refer to the section entitled

"Connecting to the hob" in the instruction manual for

your extractor hood.

Note: If you connect your hob directly to the extractor

hood, it can no longer be connected to your home

network as well and you can no longer use Home

Connect.

1. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

2. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

‹ lights up in the hotplate display.

3. Set the value ‚ in the settings area.

‚ flashes in the hotplate display.

4. You have two minutes to initiate the connection

process on the extractor hood.

Once the hob is connected to the extractor hood, the

value „ appears in the hotplate display. After you exit

the settings menu, the symbols for the hob-based hood

controls are displayed in the hob's control panel.

Connecting via your home network

You require a router that has WPS functionality.

You require access to your router.If you do not have

this, follow the steps for "Direct connection".

When you begin, make sure that the extractor hood is

connected to the app or is on your home network.

1. Touch the 0 symbol for 4 seconds.

The product information will be displayed.

Hood connection en

2. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

‹ (not connected) or ƒ (connected to home

network) will be lit on the hotplate display.

3. Set the value ‚ in the settings area.

‚ will flash on the hotplate display.

4. If the appliance is not yet connected to your home

network, press the WPS button on the router within

the next 2 minutes.

The hob will be connected to your home network

and the value ƒ will appear on the hotplate display.

The process of connecting to the extractor hood

starts automatically and is active for 2 minutes.

If the appliance is already connected to your home

network, proceed to the next step.

5. Initiate the process for connecting to the extractor

hood.

Once the connection process is complete, the value „

will appear on the hotplate display.The symbols for the

hood controls on the hob are displayed on the hob's

control panel.

Note: Connection can only be established when both

appliances are connected to your home network and

the connection process has been initiated for both of

them. If the connection process has already timed out

for one of the two appliances, try to connect again

(basic settings, ™‚‡ setting).

Resetting connection

You can reset the connections saved for your home

network and extractor hood at any time.

1. Touch the 0 symbol for 4 seconds.

Product information will be displayed.

2. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

3. Set the ‹ value on the control panel.

Control the hood via the hob

In the basic settings of your hob you can adjust the

behaviour of your extractor hood depending on the

switch-on/off of the hob or individual cooking zones.

~ "Hood control settings" on page 19

You can select other settings using the control panel.

Setting the fan

Switching on

Touch the I symbol.

Setting fan level

Select the fan level.

You can choose between the levels 1, 2 and 3. To

select the intensive levels, touch buttons 4 or 5, or

touch the & button repeatedly until the required intensive

level is set.

Switching off

Select fan level 0.

Setting automatic mode

Switching on

Touch the I symbol until the ‘ symbol appears on the

control panel.

The fan starts up automatically when steam is

produced.

Switching off

Touch the I symbol until the ‘ symbol goes out, or

select another fan level.

Setting the hood lighting

You can switch the hood light on and off via the hob's

control panel.

Touch the = symbol.

Hood control settings

Ho o d cont r ol set t i ngs

You can adapt the hood controls to suit your needs at

any time.

Note: The ™‚‰, ™ƒ‹, ™ƒ‚ and ™ƒƒ settings are only

displayed if the appliance is connected to an extractor

hood.

Symbol Function

™‚‡

Hob-hood connection

‹

Not connected / disconnect.

‚

Connect.

Connected to home network (WLAN).

„

Connected to extractor hood.

™‚‰

Automatic fan switch-on

‹

Switched off.

The hood must be switched on manually if needed.

‚

Switched on in automatic mode.*

In automatic mode, the hood switches itself on when a

cooking zone is switched on.

Switched on in manual mode.

The hood switches itself on with a default setting when a

cooking zone is switched on.

™ƒ‹

Fan run-on

‹

The fan switches itself off when the hob is switched off.

‚

Switched on in automatic mode.*

Switched on with standard fan run-on.

„

No change in settings.

™ƒ‚

Switch light on automatically

‹

Switched off.

‚

Switched on.*

The light switches itself on when the hob is switched on.

™ƒƒ

Switch light off automatically

‹

Switched off.*

‚

Switched on.

The light switches itself off when the hob is switched off.

* Basic setting

en Cleaning

DCleaning

Cl eani ng

Suitable maintenance and cleaning products can be

purchased from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills

from burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for glass

ceramic. Follow the cleaning instructions on the

packaging.

Never use:

■ Undiluted washing-up liquid

■ Detergent intended for dishwashers

■ Scouring agents

■ Harsh cleaning agents such as oven spray or stain

remover

■ Abrasive sponges

■ High-pressure cleaners or steam jet cleaners

Ground-in dirt can be best removed with a glass

scraper, available from retailers. Please note the

manufacturer's instructions.

You can also obtain a suitable glass scraper from our

after-sales service or from the e-Shop.

Using special sponges to clean glass ceramic achieves

great cleaning results.

Hob surround

To prevent damage to the hob surround, observe the

following instructions:

■ Use only hot soapy water.

■ Wash new sponge cloths thoroughly before use.

■ Do not use any sharp or abrasive agents.

■ Do not use the glass scraper.

3Trouble shooting

Tr oubl e s hoot i ng

Faults often have simple explanations. Please read the

notes in the table before calling the after-sales service.

The electronics of your hob are underneath the control

panel. For various reasons, the temperature in this area

may rise sharply.

In order that the electronics do not overheat, the

hotplates are switched off as and when necessary. The

”ƒ, ”…, or ”† display appears alternately with the • or

œ residual heat indicator.

Display Fault Measure

None The power supply has been disconnected. Check the household fuse for the appliance. Check whether there is a

power cut by trying other electronic appliances.

All displays flash The touch control is wet or an object is resting

on it.

Dry the control or remove the object.

”ƒ

Several hotplates have been used over a pro-

longed period at high power settings. To pro-

tect the electronics, the hotplate has been

switched off.

Wait a while. Touch any touch control. When ”ƒ goes out, the electronics

have cooled down sufficiently. You can continue cooking.

”… Despite the switch-off by ”ƒ, the electronics

have become hot again. All hotplates have

therefore been switched off.

Wait a while. Touch any touch control. When ”… goes out, you can con-

tinue cooking.

”†and the heat setting

flash alternately. An

audible signal can be

heard

Warning: There is a hot pan in the area of the

control panel. There is a risk that the electron-

ics will overheat.

Remove the pan. The fault display goes out shortly afterwards. You can

continue cooking.

”†and audible signal

There is a hot pan in the area of the control

panel. To protect the electronics, the hotplate

has been switched off.

Remove the pan. Wait a while. Touch any control. When ”† goes out, you

can continue cooking.

”‰

The hotplate was in operation for too long and

has switched itself off.

You can switch the hotplate back on again immediately.

š“ The hotplates do

not heat up

Demo mode is switched on Switching off the demo mode: Disconnect the appliance for 30 seconds

from the power supply (switch off the household fuse or the circuit breaker

in the fuse box). Touch any touch control after 3 minutes. The demo mode

is switched off.

La pagina sta caricando ...

Siemens ET975LVV1M Manuale utente

Marca: Siemens

Modello: ET975LVV1M

Categoria: Piani cottura

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Siemens ET975LVV1M User manual

Siemens ET975LVV1M Manuale utente

Siemens ET975LVV1M Manuale utente

in altre lingue

Documenti correlati

Altri documenti