ProLights STARK400 Manuale utente

Marca: ProLights

Modello: STARK400

Categoria: Stroboscopi

Tipo: Manuale utente

USER MANUAL

MANUALE UTENTE

STARK400

MOVING HEAD

EN - IT

STARK400

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.06-03/19 - FW 2.1.00

STARK400

Packing content

• STARK400

• Mount bracket

• User manual

TABLE OF CONTENTS

Safety

General instructionsGeneral instructions

Warnings and installation precautionsWarnings and installation precautions

1 Technical drawing

1. 1 Operating elements and connections1. 1 Operating elements and connections

2 Installation

2. 1 Mounting2. 1 Mounting

3 Functions and settings

3. 1 Operation3. 1 Operation

3. 2 Basic3. 2 Basic

3. 3 Menu structure3. 3 Menu structure

3. 4 Slave Receive mode3. 4 Slave Receive mode

3. 5 Operation in automatic mode3. 5 Operation in automatic mode

3. 6 Scenes Record mode3. 6 Scenes Record mode

3. 7 Music mode 3. 7 Music mode

3. 8 Sensitivity microphone3. 8 Sensitivity microphone

3. 9 Linking 3. 9 Linking

3. 10 DMX mode3. 10 DMX mode

3. 11 DMX conguration 3. 11 DMX conguration

3. 12 DMX addressing 3. 12 DMX addressing

3. 13 Connection of the DMX line 3. 13 Connection of the DMX line

3. 14 Construction of the DMX termination 3. 14 Construction of the DMX termination

3. 15 DMX control3. 15 DMX control

3. 16 Channel Function3. 16 Channel Function

3. 17 Wireless control settings 3. 17 Wireless control settings

3. 18 Fixture settings 3. 18 Fixture settings

3. 19 Lamp settings 3. 19 Lamp settings

3. 20 Display settings 3. 20 Display settings

3. 21 Special functions3. 21 Special functions

3. 22 Fixture information 3. 22 Fixture information

4 Maintenance

4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement4. 2 Fuse replacement

4. 3 Trouble shooting4. 3 Trouble shooting

STARK400

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

STARK400

- 1 - TECHNICAL DRAWING

Fig.1

STARK400

1. MOVING HEAD

2. ROTARY ARM

3. HANDLE

4. LED INDICATOR "WDMX"

5. MICROPHONE

6. CONTROL PANEL with LCD display

and 5 button used to access

the control panel functions and

manage them.

7. EtherCON connector Signal IN/

OUT

8. EtherCON connector Signal IN/

OUT

9. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C

10. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C

11. POWER IN (PowerCON IN):

for connection to a socket

(100-240V~/50-60Hz) via the

supplied mains cable.

12. POWER OUT (PowerCON OUT):

power output for connection of

multiple units in series.

13. MAIN FUSE HOLDER: replace a

burnt-out fuse by one of the same

type only.

1.2 OPERATING ELEMENTS AND CONNECTIONS

Fig.2

View A

View B

7 9 11

8 10 1312

STARK400

- 2 - INSTALLATION

Fig.3

Fig.4

ALISCAFF

CLAMP

SAFETY

CABLE

OMEGA

BRACKETS

2.1 MOUNTING

The may be set up on a solid and even surface. By means of the xing facilities of the baseplate, the

unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

STARK400

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the STARK400 is ready for operation. To switch

o, disconnect the mains plug from the socket. For a more convenient operation it is recommended to

connect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The STARK400 has a LCD display and 5 button used to access the control panel functions and manage

them (g.4).

Fig.4 - Functions of the buttons and display icons

CONNECT

LIGHT

INFORMATION

SET

PROGRAM

LEFT RIGHT UP DOWN ENTER BATTERY

Return to the top

level

Commute from

units, tens, hundred

in the menu

Increases the value

displayed or passes

to the previous item

in a menu

Decreases the value

displayed or passes

to the next item in

the menu

Conrms the

displayed value,

or activates the

displayed function,

or enters the

successive menu

Used to activate the

backup battery. It

allows to switching

display interface

without main power

STARK400

3.3 MENU STRUCTURE

1 CONNECT

Address

DMX

Value (1-512)

W-DMX

Value (1-512)

Artnet

Value (1-512)

DMX Mode

Mode

WASH / FX / FX-16BIT / PIXFX / RING / USER

Edit User

Max Channel/Control/Pan/Pan Fine/Tilt/...

Wireless

DMX Out

ON/OFF

Reset Connect

YES/NO

Ethernet

DMX Out

ON/OFF

IP Address

2.XX.XX.01

IP Mask

255.0.0.0

Universe

00000

RDM ID

Name

Fixture ID Name

Mode

Mode1 / Mode2

Password

050 (unlocks the following settings)

PID Code

00001

2 SET UP

Temperature

Temperature C/F

Celsius/Fahrenheit

Max Temperature

Value (60°-139° C /140°-282°F)

Movement

Pan Reverse

YES/NO

Tilt Reverse

YES/NO

Pan Degree

540/630

Feedbacks

YES/NO

Pan/Tilt Mode

Standard/Smooth

Screen

Backlight

Always On/Min (01-99)

Flip Display

YES/NO/AUTO

Display Bright

Value (00-31)

Key Lock

ON/OFF

Language

EN/FR/SP...

Fixture

Fans Mode

Auto Speed/High Speed

No Signal

Close/Hold/Auto/Music

Hibernation

Disable/Min (01-99)

Theatre Mode

Yes/No

Adjust

Control, Pan, Pan Fine,

Tilt, Tilt Fine, Pan&Tilt

Speed, Shutter, Dimmer,

Dimmer Fade, [...]

Value (000-255) for each function

STARK400

3 ADVANCED

Reset

All

Pan & Tilt

Dimmer Curve

New Mode

Old Mode

Halogen

Emulation

HB/3200K/5600K/6000K

Calibration

Password

050 (unlocks the following settings)

Pan

Value (-128-127)

Tilt

Value (-128-127)

1Led Red

Value (-128-127)

1Led Green

Value (-128-127)

1Led Blue

Value (-128-127)

2Led Red

Value (-128-127)

2Led Green

2Led Blue

......

7Led Red

7Led Green

7Led Blue

Reload Default

Basic Reload

ON/OFF

Program Reload

ON/OFF

Password

050 (unlocks the following settings)

Private Reload

ON/OFF

All Reload

ON/OFF

4 INFORMATION

Time I nfo.

Current / Fixture Life

Temperature

Near Lamp Temp

Fans Speed

Near Lamp Fan

Channel Value

Pan...

Error Message

Pan, Tilt...

Fixture Model

xxxxxxxxx

Software Ver.

1U01 V1.0.00

5 STAND ALONE

Play

DMX Receive

Slave Receive

Part 1-2-3 Receive

Static

1-250 Scene

Sequence

Alone/Master

Music

Alone/Master

Mic Sens.

Value (00-99%)

STARK400

3.4 SLAVE RECEIVE MODE

This mode will allow you to link up the units together without a controller. Choose a unit to function as the

Master. The unit must be the rst unit in line; other units will work as slave with the same eect.

A Master unit can send up to 3 dierent data groups to the Slave units, i.e. a Master unit can start 3 dier-

ent Slave units, which run 3 dierent programs. The Master unit sends the 3 program parts in a continuous

loop.

The Slave unit receives data from the Master unit according to the group which the Slave unit was as-

signed to.

For example, if a slave device is set to Receive Part 1, the Master unit Slave unit will send the automated

Chase Part 1; if set to Receive Part 2, the Chase Part 2 Slave units will receive from the Master.

To set the drive as a slave, proceed as follows:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Program icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, and then select Play and press the ENTER

button to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, and select Slave Receive and press ENTER to

conrm.

• Press the UP/DOWN button to select the dierent modes of operation Part 1 Receive/Receive Part 2/Part 3

Receive, and then press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

Select the desired program on the master unit (described in section 3.5).

Use the DMX connectors of the STARK400 and an XLR cable to form a chain of units. Under certain

conditions and lengths you want to make a termination as shown on page 17.

3.5 OPERATIONS IN AUTOMATIC MODE

The unit independently runs through its show. Before you send an automatic program you need to set the

drive as Master/Alone:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Program icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter

Select Chase

Chase Part 1

Chase 1 - Chase 8

Chase Part 2 Chase 1 - Chase 8

Chase Part 3

Chase 1 - Chase 8

Edit Chase

Chase 1

Step 1 - 64

Chase 2 Step 1 - 64

....

Chase 8

Step 1 - 64

Edit Scenes

Edit Scenes 001

Pan/Pan Fine/Tilt/Tilt Fine/...

Edit Scenes ...

Pan/Tilt/CMY, Gobo1...

Edit Scenes 250

Pan/Tilt/CMY, Gobo1...

Scenes Record

Sc XX - Sc XX

STARK400

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Sequence and press ENTER to conrm

your choice.

• Press the UP/DOWN button to select the mode of operation:

- Master, if the unit is connected in series with other units and it acts as the Master;

- Alone, if the unit is not connected to other units.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

The unit will go into automatic mode by executing the program automatically.

Select Chase

The function Select Chase lets you choose the automatic program to actually run.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Program icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Select Chase and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Chase Part 1/Chase Part 2/Chase Part 3

and press ENTER to conrm.

• Press the UP/DOWN button to select Chase1-Chase8, and press the ENTER button to conrm.

• Press the LEFT button repeatedly to exit the menu and save changes.

Edit Chases

The function Edit Chases allows you to create automatic pre-programmed show.

The automatic programs Chase Part1/2/3 are each divided into Chase1-Chase8. Each Chase can be composed

of 1-64 step that can be congured through the following procedure:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Program icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Chases and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Chase 1 - Edit Chase 8, then press the

ENTER button to conrm.

• Press the UP/DOWN button to select the Step 01 - Step 64, and press ENTER to conrm.

• Press the UP/DOWN button to select the Scene you want to set for the Step chosen, and then press

ENTER to conrm.

• Press the LEFT button repeatedly to exit the menu and save changes.

Edit Scenes

The function Edit Scenes allows you to create individual scenes to be included in the Chase Step.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Program icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Scenes and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Edit Scene 001 - Edit Scene 250, then press the

ENTER button to conrm.

• Press the UP/DOWN button to select the desired function you want to edit (Control, Pan, Tilt, etc..), Then

press the ENTER button to conrm.

• Press the UP/DOWN button to change the value of the function, then press the ENTER button to

STARK400

conrm.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.6 SCENES RECORD MODE

STARK400 is equipped with a built-in DMX recorder by which you can transmit the programmed scenes

from your DMX-controller to the device. Proceed as follows to store the sequence of scenes in the unit.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll through the menu, select the Program icon, then press the ENTER

button to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Scenes Record and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to adjust the scene at the beginning and end to be inserted in the auto-

matic program, then press the ENTER button to conrm.

• Press the LEFT button repeatedly to exit the menu and save changes.

When recalling scenes from the controller will automatically be transmitted to the device.

3.7 MUSIC MODE

In music mode, via its integrated microphone, the unit can be controlled by music with a clear rhythm in

the bass range. If the music control should not work optimally, increase the volume or reduce the distance

between the sound source and the light eect unit or alternatively increase the sensitivity of the micro-

phone.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Program icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Music and press ENTER to conrm.

• Press the UP/DOWN button to select the mode of operation:

- Master, if the mobile head is connected in series to other units, and it performs the Master function;

- Alone, if the xture is not connected to other units.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

The unit will go into music mode by executing an automatic program to the rhythm of music.

3.8 SENSITIVITY MICROPHONE

Select this function to set the value of the sensitivity of the microphone for use with a music control:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Mic Sens. and press ENTER to conrm.

• Press the UP/DOWN button to adjust the level of sensitivity of the microphone, and then press the

ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

STARK400

3.9 LINKING

Several units may be interconnected in order to control all further slave units to the same eect of the

master unit.

1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the rst slave unit.

2. Connect the DMX OUT of the rst slave unit to the DMX IN of the second slave unit, etc. until all units

are connected in a chain.

3.10 DMX MODE

To enter the DMX mode, follow these steps:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select the DMX Address and press the ENTER key.

• Press the arrow keys to select the desired value (001-512).

• Press the ENTER key to conrm the setting.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.11 DMX CONFIGURATION

The STARK400 has 5 DMX channel congurations which can be accessed from the control panel.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Users and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select User Mode and press ENTER to conrm

your choice.

• Use the UP/DOWN button to select the desired DMX channel conguration (Wash, FX, PIXFX, FX-16BIT, RING,

User), then press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

The tables on page 17 show the mode of operation and their values DMX.

The unit is equipped with 5-pole XLR connections.

Edit User

The Edit User, in the same menu, allows you to create a prole of personalized functions. You can change

the parameters of the various functions (Control, Pan, Tilt, etc.). Once you’ve created your custom prole,

you can use it by selecting the USER mode as described above.

3.12 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sucient connect the controller to STARK400.

To able to operate the STARK400 with a light controller, adjust the DMX start address for the rst a DMX

channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX chan-

nel, adjust the start address 33 on the STARK400. The other functions of the light eect panel are then

automatically assigned to the following addresses.

An example with the start address 33 is shown below:

STARK400

Fig.5 - Example 16 DMX channels conguration

DMX Address: 96DMX Address: 64DMX Address: 33 DMX Address: 80

. . . . . . . . . . . .

DMX512 Controller

Numero

canali DMX

Indirizzo di

start (esempio)

Indirizzo DMX

occupati

Prossimo indirizzo di start

possibile per unità n°1

Prossimo indirizzo di start

possibile per unità n°2

Prossimo indirizzo di start

possibile per unità n°3

16 33 33-48 64 80 96

26 33 33-58 84 110 136

50 33 33-82 132 182 232

STARK400

Fig.6

3.13 CONNECTION OF THE DMX LINE

DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-

ance and low capacity.

The following diagram shows the connection mode:

ATTENTION

The screened parts of the cable (sleeve) must never be connected to the system’s earth, as this would

cause faulty xture and controller operation.

Over long runs can be necessary to insert a DMX level matching amplier.

For those connections the use of balanced microphone cable is not recommended because it cannot

transmit control DMX data reliably.

• Connect the controller DMX input to the DMX output of the rst unit.

• Connect the DMX output to the DMX input of the following unit. Connect again the output to the input

of the following unit until all the units are connected in chain.

• When the signal cable has to run longer distance is recommended to insert a DMX termination on the

last unit.

3.14 CONSTRUCTION OF THE DMX TERMINATION

The termination avoids the risk of DMX 512 signals being reected back along the cable when they reach-

es the end of the line: under certain conditions and with certain cable lengths, this could cause them to

cancel the original signals.

The termination is prepared by soldering a 120Ω 1/4 W resistor between pins 2 and 3 of the 5-pin male XLR

connector, as shown in gure.

DMX - OUTPUT

XLR socket

DMX - INPUT

XLR plug

Pin1 : GND - Shield

Pin2 : - Negative

Pin3 : + Positive

Pin4 : N/C

Pin5 : N/C

Fig.7

Example:

3 pin XLR connector

STARK400

3.15 DMX CONTROL

V1.2.00 and above

V2.1.00

and above

STARK 400

FUNCTION

DMX

Value

Wash FX Pixfx

Fx-

16bit

Ring

1 1 1 1 1

PAN

0~100%

000 - 255

2 2 2 2 2

PAN FINE

0~100%

000 - 255

3 3 3 3 3

TILT

0~100%

000 - 255

4 4 4 4 4

TILT FINE

0~100%

000 - 255

5 5 5 5 5

MOVMENT SPEED

Fastest to slowest

Movement with Blackout

000 - 247

248 - 255

6 6 6 6 6

SHUTTER

Closed

Strobe eect slow to fast

Open 1

Pulse-eect in sequences

Open 2

Random strobe eect slow to fast

Open 3

000 - 010

011 - 082

083 - 093

094 - 163

164 - 174

175 - 244

245 - 255

7 7 7 7 7

DIMMER

Dimmer 0% ~ 100%

000 - 255

DIMMER FINE

Dimmer 0% ~ 100%

8 8 9 8

DIMMER FADE

Snap to Fade

000 - 255

8 9 9 10 9

VIRTUAL COLOR FUNCTION

No Function

White presets

Forward Spin

Reverse Spin

Continuous

Color Bounce

TBD

000 - 015

016 - 031

032 - 047

048 - 063

064 - 079

080 - 111

112 - 255

9 10 10 11 10

VIRTUAL COLOR 1

White Presets

White 2000K ~ 2700K

White 2700K ~ 3200K

White 3200K ~ 4200K

White 4200K ~ 5600K

White 5600K ~ 8000K

White 8000K ~ 10000K

Forward Spin

Rainbow Eect (Slow to Fast)

000 - 155

156 - 175

176 - 195

196 - 215

216 - 235

236 - 255

000 - 255

STARK400

V1.2.00 and above

V2.1.00

and above

STARK 400

FUNCTION

DMX

Value

Wash FX Pixfx

Fx-

16bit

Ring

9 10 10 11 10

Reverse Spin

Rainbow Eect (Slow to Fast)

Continuous

Black

Red

Green

Blue

White

Pastel Red

Pastel Green

Pastel BLue

Cyan

Magenta

Yellow

Light Yellow

Light BLue

Light Magenta

Full White

Full White ~ White 3200K

White 3200K ~ White 4200K

White 4200K ~ White 5600K

000 - 255

000 - 000

001 - 013

014 - 027

028 - 041

042 - 055

056 - 069

070 - 083

084 - 097

098 - 111

112 - 125

126 - 139

140 - 153

154 - 167

168 - 181

182 - 195

196 - 225

226 - 240

241 - 255

10 11 11 12 11

VIRTUAL COLOR 2 (Only on Color Bounce)

Color Bounce

Black

Red

Green

Blue

White

Pastel Red

Pastel Green

Pastel BLue

Cyan

Magenta

Yellow

Light Yellow

Light BLue

Light Magenta

Full White

Full White ~ White 3200K

White 3200K ~ White 4200K

White 4200K ~ White 5600K

000 - 000

001 - 013

014 - 027

028 - 041

042 - 055

056 - 069

070 - 083

084 - 097

098 - 111

112 - 125

126 - 139

140 - 153

154 - 167

168 - 181

182 - 195

196 - 225

226 - 240

241 - 255

STARK400

V1.2.00 and above

V2.1.00

and above

STARK 400

FUNCTION

DMX

Value

Wash FX Pixfx

Fx-

16bit

Ring

11 12 13

RED-All

0~100%

000 - 255

12 13 14

GREEN -All

0~100%

000 - 255

13 14 15

BLUE-All

0~100%

000 - 255

14 15 16

WHITE-All

0~100%

000 - 255

RED ZONE 1

0~100%

000 - 255

GREEN

ZONE 1

0~100%

000 - 255

BLUE ZONE

0~100%

000 - 255

WHITE

ZONE 1

0~100%

000 - 255

RED ZONE 2

0~100%

000 - 255

GREEN

ZONE 2

0~100%

000 - 255

BLUE ZONE

0~100%

000 - 255

WHITE

ZONE 2

0~100%

000 - 255

15 16 12 17 20

ZOOM

Big to Small

000 - 255

STARK400

V1.2.00 and above

V2.1.00

and above

STARK 400

FUNCTION

DMX

Value

Wash FX Pixfx

Fx-

16bit

Ring

17 13 18 21

PATTERNS

No Pattern

Static Pattern

Static mode

Dynamic Pattern Selection

Dynamic Pattern 1

Dynamic Pattern 2

Dynamic Pattern 3

Dynamic Pattern 4

Dynamic Pattern 5

Dynamic Pattern 6

Dynamic Pattern 7

Dynamic Pattern 8

Dynamic Pattern 9

Dynamic Pattern 10

Dynamic Pattern 11

Dynamic Pattern 12

Dynamic Pattern 13

Dynamic Pattern 14

Dynamic Pattern 15

Dynamic Pattern 16

Dynamic Pattern 17

Dynamic Pattern 18

Dynamic Pattern 19

Dynamic Pattern 20

Dynamic Pattern 21

Dynamic Pattern 22

Dynamic Pattern 23

Dynamic Pattern 24

Dynamic Pattern 25

Dynamic Pattern 26

Dynamic Pattern 27

Dynamic Pattern 28

Dynamic Pattern 29

Dynamic Pattern 30

Dynamic Pattern 31

Dynamic Pattern 32

Dynamic Pattern 33

Dynamic Pattern 34

Dynamic Pattern 35

Dynamic Pattern 36

Dynamic Pattern 37

Dynamic Pattern 38

Dynamic Pattern 39

Dynamic Pattern 40

000 - 015

016 - 031

032 - 035

036 - 040

041 - 045

046 - 050

051 - 055

056 - 060

061 - 065

066 - 070

071 - 075

076 - 080

081 - 085

086 - 090

091 - 095

096 - 100

101 - 105

106 - 110

111 - 115

116 - 120

121 - 125

126 - 130

131 - 135

136 - 140

141 - 145

146 - 150

151 - 155

156 - 160

161 - 165

166 - 170

171 - 175

176 - 180

181 - 185

186 - 190

191 - 195

196 - 200

201 - 205

206 - 210

211 - 215

216 - 220

221 - 225

226 - 230

Random Pattern

Random 231 - 255

La pagina sta caricando ...

ProLights STARK400 Manuale utente

Marca: ProLights

Modello: STARK400

Categoria: Stroboscopi

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: ProLights STARK400 User manual

ProLights STARK400 Manuale utente

ProLights STARK400 Manuale utente

in altre lingue

Documenti correlati

Altri documenti