Bosch WAP28482AU/01 Guida d'installazione
- Categoria
- Lavatrici
- Tipo
- Guida d'installazione
3FHJTUFSZPVS
OFXEFWJDFPO
.Z#PTDIOPXBOE
HFUGSFFCFOFGJUT
CPTDIIPNFDPN
XFMDPNF
en Instruction Manual and Installation Instructions
Washing machine
WAP...
2
Your new washing machine
You have chosen a Bosch washing
machine.
Please take a few minutes to read and
become familiar with the advantages of
your washing machine.
To meet the high quality demands
required by Bosch, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.bosch-
home.com or contact our after-sales
service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washing machine.
Display rules
: Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■ / -
Lists are represented by a small box or
a dash.
en
3
Contents
enInstruction Manual and Installation Instructions
8 Intended use. . . . . . . . . . . . . . . . .4
( Safety instructions . . . . . . . . . . .5
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 5
7 Environmental protection . . . . . .7
Packaging/used appliance . . . . . . . . . 7
Tips on economical use . . . . . . . . . . . 7
* Getting to know the appliance . 8
Washing machine . . . . . . . . . . . . . . . . 8
Control panel . . . . . . . . . . . . . . . . . . . 9
Display panel . . . . . . . . . . . . . . . . . . 10
Z Laundry. . . . . . . . . . . . . . . . . . . .11
Prepare the laundry . . . . . . . . . . . . . 11
Sorting laundry . . . . . . . . . . . . . . . . . 11
Starching . . . . . . . . . . . . . . . . . . . . . 11
Dyeing/bleaching . . . . . . . . . . . . . . . 11
C Detergent . . . . . . . . . . . . . . . . . .12
Correct selection of detergent . . . . . 12
Saving energy and detergent . . . . . . 12
0 Programme default settings . . .13
Temperature . . . . . . . . . . . . . . . . . . . 13
Spin speed . . . . . . . . . . . . . . . . . . . . 13
Finish in time . . . . . . . . . . . . . . . . . . 13
\ Additional programme
settings . . . . . . . . . . . . . . . . . . . .14
SpeedPerfect/EcoPerfect . . . . . . . . . 14
Rinse&Water Plus . . . . . . . . . . . . . . . 14
Soak . . . . . . . . . . . . . . . . . . . . . . . . 14
Easy Iron. . . . . . . . . . . . . . . . . . . . . . 14
1 Operating the appliance . . . . . .15
Preparing the washing machine . . . . 15
Select programme/switch on the
appliance . . . . . . . . . . . . . . . . . . . . . 15
Change the programme default
settings . . . . . . . . . . . . . . . . . . . . . . .15
Select additional programme
settings . . . . . . . . . . . . . . . . . . . . . . .15
Placing laundry into the drum . . . . . .15
Measure and add detergent and
care products . . . . . . . . . . . . . . . . . .16
Start the programme . . . . . . . . . . . . .17
Childproof lock . . . . . . . . . . . . . . . . .17
Adding/removing laundry . . . . . . . . .18
Changing the programme . . . . . . . . .18
Cancel the programme . . . . . . . . . . .18
Programme end during rinse hold. . .18
Programme end . . . . . . . . . . . . . . . .18
Removing laundry/switching off the
appliance. . . . . . . . . . . . . . . . . . . . . .18
M Setting the signal . . . . . . . . . . . 19
H Sensors . . . . . . . . . . . . . . . . . . . 19
Unbalanced load detection system . .19
2 Cleaning and maintenance. . . . 20
Machine housing/control panel . . . . .20
Drum . . . . . . . . . . . . . . . . . . . . . . . . .20
Descaling . . . . . . . . . . . . . . . . . . . . .20
Detergent drawer and housing . . . . .20
Detergent solution pump blocked . . .20
The drain hose at the siphon is
blocked . . . . . . . . . . . . . . . . . . . . . . .21
Filter in the water supply blocked . . .22
3 Faults and what to do about
them. . . . . . . . . . . . . . . . . . . . . . 22
Emergency release . . . . . . . . . . . . . .22
Information on the display panel . . . .23
Faults and what to do about them. . .23
4 After-sales service . . . . . . . . . . 25
J Technical data . . . . . . . . . . . . . . 25
en Intended use
4
5 Positioning and connecting. . . 26
Included with the appliance . . . . . . . 26
Safety instructions . . . . . . . . . . . . . . 26
Installation surface. . . . . . . . . . . . . . 27
Installation on a base or a wooden
joist floor . . . . . . . . . . . . . . . . . . . . . 27
Installation on a platform with
drawer . . . . . . . . . . . . . . . . . . . . . . . 27
Installing the appliance in a
kitchenette . . . . . . . . . . . . . . . . . . . . 27
Removing the transport locks . . . . . 27
Hose and cable lengths. . . . . . . . . . 28
Water inlet . . . . . . . . . . . . . . . . . . . . 28
Water outlet . . . . . . . . . . . . . . . . . . . 29
Levelling . . . . . . . . . . . . . . . . . . . . . 30
Electrical connection . . . . . . . . . . . . 30
Before washing for the first time . . . 31
Transportation . . . . . . . . . . . . . . . . . 31
8 Intended use
Intended use
■ For private domestic use only.
■ The washing machine is suitable for
washing machine-washable fabrics
and hand-washable wool in
detergent solution.
■ To be operated with cold mains
water and standard detergents and
care products which are suitable for
use in front-loading washing
machines. Do not use detergents for
hand wash.
■ When measuring the amount of all
detergents/additives/care products
and cleaning agents, always check
the manufacturer's instructions.
■ The washing machine may be used
by children over the age of 8 years
old and by persons with reduced
physical, sensory or mental capacity
or by persons with a lack of
experience or knowledge if they are
supervised or have been instructed
by a responsible person.
Children must not perform cleaning
or maintenance work unsupervised.
■ Keep children under the age of 3
years away from the washing
machine.
■ Keep pets away from the washing
machine.
Read the Instruction Manual and
Installation Instructions and all other
information supplied with the washing
machine and use the machine
accordingly.
Retain the documents for subsequent
use.
Safety instructions en
5
( Safety instructions
Safety instructi ons
Electrical safety
:Warning
Danger of death!
There is a risk of electric shock
if you touch live components.
■ Never touch or hold the
mains plug with wet hands.
■ Only pull out the mains cable
by the plug and never by the
cable, as this could damage
it.
■ The appliance must be
grounded.
Electrical connection
~ Page 30
Risk of injury
:Warning
Risk of injury!
■ When the washing machine
is lifted by its protruding
parts (e.g. the washing
machine door), the
components may break off
and cause injuries.
Do not lift the washing
machine by protruding parts.
■ If you climb on the washing
machine, the worktop may
break and cause injuries.
Do not climb onto the
washing machine.
■ If you lean on the washing
machine door when it is
open, the washing machine
may tip over and cause
injuries.
Do not lean on the washing
machine door when it is
open.
■ Reaching into the drum
when it is turning can cause
injuries to hands.
Do not reach into the drum
when it is turning.
Wait until the drum has
stopped turning.
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot water e.g. if hot
water is being drained into a
wash basin.
Do not reach into the hot
detergent solution.
Safety for children
:Warning
Danger of death!
If children play with the washing
machine, they may get into life-
threatening situations or injure
themselves.
■ Do not leave children
unattended near the washing
machine.
■ Do not let children play with
the washing machine.
en Safety instructions
6
:Warning
Danger of death!
Children may lock themselves
in appliances, putting their lives
at risk.
For appliances that have
reached the end of their service
life:
■ Disconnect the mains plug.
■ Cut through the mains cable
and remove it, along with
plug.
■ Destroy the lock on the
washing machine door.
:Warning
Risk of suffocation!
Children may become wrapped
in packaging/film or packing
parts if allowed to play with
them, or they may pull them
over their heads and suffocate.
Keep packaging, film and
packaging parts out of the
reach of children.
:Warning
Risk of poisoning!
Detergents and care products
may be poisonous if
consumed.
Keep detergents and care
products out of the reach of
children.
:Warning
Eye/skin irritation!
Detergents and care products
may cause irritation if they
come into contact with the eyes
or skin.
Keep detergents and care
products out of the reach of
children.
:Warning
Risk of injury!
When you wash at high
temperatures, the glass in the
washing machine door gets
hot.
Do not let children touch the
hot washing machine door.
Environmental protection en
7
7 Environmental
protection
Environmental protection
Packaging/used appliance
Do’s
■ Hand over the old/discarded
electronic equipment only to
authorized collection centers for
disposal
■ Consult the authorized service
center as to whether the Electronic
Equipment can be repaired or not,
before discarding
■ Consult the retailer about appliance
take back schemes
Don’ts
■ Don’t dump the discarded Electronic
Equipment in the open or in any land
fill site, as this will result in
contamination of the soil and the
ground water
■ Don’t dispose of the discarded
Electronic Equipment in household
bins or Municipal bins
■ The product is not meant for re-sale
to any unauthorized agencies/scrap
dealers
■ Don't keep any replaced spare
part(s) from the product in an
exposed area
Tips on economical use
■ Always fill the appliance with the
maximum amount of laundry for
each programme.
Overview of programmes ~:
Supplementary sheet for the
operating and installation
instructions.
■ Wash normally soiled laundry
without a prewash.
■ Save energy and detergent when
washing lightly and normally soiled
laundry.
Saving energy and detergent
~ Page 12
■ The selectable temperatures apply
to the care labels on the textiles. The
temperatures in the machine may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
■ Information about the energy
consumption
*
:
The display provides information
about the relative energy
consumption in the selected
programs.
The more indicator lights light up,
the higher the program's
consumption.
This enables you to compare the
consumption levels of the different
programs when choosing your
program settings and to decide on
an energy- and water-saving
program setting.
■ Energy-saving mode: The display
panel lighting goes out after a few
minutes and start button flashes. To
activate the lighting, press any
button.
Energy-saving mode is not activated
if a programme is running.
■ If the laundry is subsequently dried
in a tumble dryer, select the spin
speed according to the tumble dryer
manufacturer's instructions.
)
Dispose of packaging in an
environmentally-responsible
manner.
The following Do’s and Don’ts
provide a framework for the
return and recycling of used
products when available in
your area.
* Depending on the model
en Getting to know the appliance
8
* Getting to know the appliance
Getting to know the appliance
Washing machine
6 7
#
( Detergent dispenser
0 Control panel
8 Door
9S Open the door
9T Close the door
@ Service flap
Getting to know the appliance en
9
Control panel
You can find possible programme default settings and additional programme
settings in the overview; these differ depending on the model.
( Programme default settings can
be changed.
Overview of all programme default
settings ~ Page 13
0 additional programme settings
can be selected.
Overview of all additional
programme settings ~ Page 14
8 Start button for starting,
interrupting, (e.g. adding laundry)
and cancelling a programme.
@ Programme selector for selecting
the programme and for switching
the washing machine on and off.
en Getting to know the appliance
10
Display panel
In the table you can find possible settings and information in the display panel; these
differ depending on the model.
Settings for the selected programme
— - 90* Temperature in °C Temperature
- - - -, 0 - 1400* Spin speed in rpm
(revolutions per minute)
Maximum spin speed or - - - - (Rinse stop = without final spin,
washing remains in the water after the last rinse)
1:30 Programme length Depends on the programme selection in h:min (hours:min-
utes)
1 - 24 Finish in h (hours) End of programme after ... Hours
9.0* Load in kg Maximum load
* Depending on the model
Status indicators for the programme progress (programme sequence)
ß, à, 0, End Wash, rinse, spin/drain, programme end.
E Childproof lock Lights up: The childproof lock is active.
Flashes: The childproof lock is actived, and if the programme selector
has been adjusted or the buttons have been pressed.
è Door lock Lights up: When the door can not be opened.
r Tap Lights up: Water pressure is too low. This extends the programme dura-
tion.
Flashes: The tap has not been turned on or there is no water supply.
Å Overdosage On if too much foam detected, one additional rinse cycle switched on.
- - - - é* Power consumption.
* Depending on the model
Laundry en
11
Z Laundry
Laundry
Prepare the laundry
Caution!
Damage to the appliance/fabrics
Foreign objects (e.g. coins, paper-clips,
needles, nails) may damage the laundry
or components in the washing machine.
Therefore, note the following tips when
preparing your laundry:
■ Empty pockets.
■ Look out for metal items (paperclips,
etc.) and remove them.
■ Wash delicates in a laundry bag
(tights, underwired bras, etc.).
■ Close any zips, button up any cover
buttons.
■ Brush sand out of pockets and
collars.
■ Remove curtain fittings or place
curtains in a laundry bag.
Sorting laundry
Sort your laundry according to the care
instructions and manufacturer's
information on the care labels:
■ Type of fabric/fibre
■ Colour
Note: Laundry can discolour or not
be cleaned correctly. Wash white
and coloured laundry separately.
Wash new bright fabrics separately
the first time you wash them.
■ Soiling
Wash laundry with the same level of
soiling together.
You can find examples of levels of
soiling on
– Light: Do not pretreat, select the
G SpeedPerfect setting if
necessary
– Normal
– Heavy: Load less laundry,
pretreat the laundry if necessary.
– Stains: Remove/pretreat stains
while they are fresh. First, dab the
stain with soapy water/do not rub.
Then wash the items of laundry
with the appropriate programme.
Stubborn/dried-in stains can
sometimes only be removed with
several washes.
■ Symbols on the care labels
The numbers in the symbols indicate
the maximum washing temperature
which may be used.
– M: Suitable for a normal
washing process;
e.g. i Cottons programme.
– U : A gentle washing process is
required;
e.g. = Easy Care//Synthetics
programme.
– V : An especially gentle washing
process is required;
e.g. “ Delicates/Silk//Delicate/
Silk programme.
– W : Suitable for washing by hand;
e.g.
WãWool programme.
– Ž : Do not wash the laundry in
the machine.
Starching
Note: Laundry shall not be treated with
fabric softener.
Starching is possible in all wash
programmes if liquid starch is used.
Measure starch into compartment M in
accordance with the manufacturer's
instructions (clean first if necessary).
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
en Detergent
12
C Detergent
Detergent
Correct selection of detergent
The care label is crucial to ensure
correct detergent selection, temperature
and laundry treatment.
■ Standard detergent with optical
brighteners
suitable for heat-resistant white
washing made from linen or cotton
Programme: i Cottons/
cold – max. 90 °C
■ Detergent for colours without
bleach or optical brighteners
suitable for coloured washing made
from linen or cotton
Programme: i Cottons/
cold – max. 60 °C
■ Detergent for colours/delicates
without optical brighteners
suitable for coloured laundry made
from easy-care fibres, synthetic
fibres
Programme: = Easy Care//
Synthetics/
cold – max. 60 °C
■ Detergent for delicates
suitable for delicate, fine fabrics, silk
or viscose
Programme: “ Delicates/Silk//
Delicate/Silk/
cold – max. 40 °C
■ Detergent for woollens
suitable for woollen fabrics
Programme:
WãWool /
cold – max. 40 °C
Saving energy and detergent
For light and normal soiling, you can
save energy (lower washing
temperature) and detergent.
Note: When measuring the amount of
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information.
Measure and add detergent and care
products ~ Page 16
Saving Soiling/note
Reduced temper-
ature and deter-
gent quantity as
per the recom-
mended dosage
Light
No visible dirt or stains. Cloth-
ing has taken on some body
odour, e.g.:
■ Light summer/sports
clothing (worn for a few
hours)
■ T-shirts, shirts, blouses
(worn for up to one day)
■ Guest bed linen and hand
towels (used for one day)
Normal
Visible dirt or a few light
stains, e.g.:
■ T-shirts, shirts, blouses
(sweat soaked, worn a
few times)
■ Towels, bedding (used for
up to one week)
Temperature as
per the care label
and detergent
quantity as per
the recom-
mended dosage
for heavy soiling
Heavy
Dirt and/or stains clearly visi-
ble, e.g. tea towels, baby
items, work clothing
Programme default settings en
13
0 Programme default
settings
Programme default settings
Note: You can find possible
programme default settings in the
overview; these differ depending on the
model.
The programme default settings for all
programmes are preset at the factory
and are displayed in the display panel
after the programme is selected.
Temperature
(Temp. °C)
Depending on what stage the program
is in, you can change the set
temperature before and during the
program.
The maximum temperature that can be
set depends on the program that has
been selected.
Spin speed
(0 rpm//0 Spin Speed)
Depending on what stage the program
is in, you can change the spin speed
(in rpm; revolutions per minute) before
and during the program.
Setting 0: The rinsing water is drained
but there is no final spin. The laundry
stays wet inside the drum, e.g. for items
that should not be spun.
Setting - - - -: (Rinse Stop) = no final
spin. The laundry stays in the water after
the final rinse.
You can select "Rinse Stop" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the program has ended.
To continue/end the program
~ Page 18
The maximum speed that can be set
depends on the model and program that
has been selected.
Finish in time
(ñ Ready in//ñ Finished in)
Before starting the program, you can
preselect the program end ("Finish in"
time) in hourly increments (h = hour) up
to a maximum of 24 hours.
To do this:
1. Select a program.
The program duration is displayed
for the selected program, e.g. 2:30h
(hours:minutes).
2. Press the ñ Ready in//ñ Finished in
button repeatedly until the required
number of hours is displayed.
3. Press the A button.
The program starts.
The selected number of hours (e.g.
8h) is shown in the display panel and
counts down until the wash program
starts. The duration of the program is
then displayed.
Note: The length of the program is
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
■ Program settings,
■ Detergent dosage (additional rinse
cycles if required due to foaming),
■ Load size/type of textiles (water
absorption differs),
■ Imbalances (e. g. due to fitted
sheets) are offset with several start-
ups of spin cycles,
■ Fluctuations in power supply,
■ Water pressure (infeeding speed).
Following the start of the program, you
can change the preselected number of
hours as follows:
1. Press the A button.
2. Use the ñ Ready in//Finished in
button to change the number of
hours.
3. Press the A button.
Following the start of the program you
can add or remove laundry as required.
en Additional programme settings
14
\ Additional programme
settings
Additional programme setti ngs
Note: You can find possible additional
programme settings in the overview;
these differ depending on the model.
SpeedPerfect/EcoPerfect
(G F)
Button with two possible settings for
adapting the selected program:
■ G SpeedPerfect
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected program,
without the SpeedPerfect/EcoPerfect
setting.
Note: Do not exceed the maximum
load.
■ F EcoPerfect
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
program, without the SpeedPerfect/
EcoPerfect setting.
Press the button to do this. First of all,
you can select the G SpeedPerfect
setting. If you press the button again,
the F EcoPerfect setting is active. The
respective symbol is shown in the
display when the setting is activated.
If you press the button again, no setting
is active.
Rinse&Water Plus
(' Rinse Plus//Z Extra Water//
Z Water Plus//Z Water plus)
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for further
enhancing the spin result.
Soak
Before the main wash cycle starts, the
washing remains for longer in the water
to partially dissolve intensive soiling.
To be used for particularly stubborn
soiling; put detergent in dispenser I
before starting the appliance.
Notes
■ Load laundry of the same colour.
■ If your machine does not have this
option, you can soak as follows:
1. Select the i Cottons30 °C
programme and the A button.
2. Press the A button after approx. 10
minutes. The laundry remains in the
soaking solution.
3. Leave the laundry to soak for as long
as required, then either press the A
button again to continue the
programme or change the
programme.
Note: No additional detergent is
required; the soaking solution is
used for washing.
Easy Iron
(p Easy iron//p Easy Iron)
Special spin sequence with subsequent
fluffing. Gentle final spin – residual
moisture in the laundry slightly
increased.
Operating the appliance en
15
1 Operating the
appliance
Operati ng the appliance
Note: Install and connect washing
machine properly.
Before the 1st wash ~ Page 31
Preparing the washing
machine
Notes
■ Never switch on a damaged
washing machine!
■ Inform customer service!
1. Connect the mains plug.
2. Turn on the tap.
3. Open the door.
4. Check that the drum is completely
emptied. Empty if necessary.
Select programme/switch on
the appliance
Note: If you have activated the
childproof lock, you must first deactivate
it before you can set a program. .
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
The program default settings for the
selected program appear in the display
panel:
■ Temperature*,
■ Spin speed*,
■ The maximum load and the duration
of the program (alternately),
■ Energy consumption*.
*Depending on the model
Change the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
Programme default settings
~ Page 13
Overview of programmes ~:
Supplementary sheet for the operating
and installation instructions.
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is active.
The settings are not saved when the
appliance is switched off.
Additional settings
~ Page 14
Overview of programmes ~:
Supplementary sheet for the operating
and installation instructions.
Placing laundry into the drum
:Warning
Danger of death!
Items of laundry pretreated with cleaning
agents that contain solvents, e.g. stain
remover/cleaning solvent, may cause an
explosion after being loaded into the
washing machine.
Hand-rinse items of laundry thoroughly
beforehand.
en Operating the appliance
16
Notes
■ Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual items of
laundry may lead to imbalances.
■ Observe the specified maximum
load. Overfilling has a negative
impact on the washing result and
promotes creasing.
1. Place presorted items of laundry
unfolded in the washing drum.
2. Make sure that no items of laundry
are trapped between the washing
machine door and the rubber seal,
and close the door.
The A button indicator lamp flashes
and the programme settings continue to
be displayed on the display panel one
after another. It is possible to change
the settings.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Measuring
Measure the detergent and care
products according to:
■ Water hardness; ask your water
supply company
■ The manufacturer's instructions on
the packaging
■ The amount of laundry
■ Soiling
Filling
:Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Note: Dilute viscous fabric softener and
fabric conditioner with water; this
prevents blockages.
Pour the detergent and care products
into the appropriate compartments:
Measuring aid A* For liquid detergent
Compartment II Detergent for the
main wash, water
softener, bleach,
stain remover
Compartment i Fabric softener,
starch
Do not exceed the
max.
Compartment I Detergent for
prewash
* Depending on the model
Operating the appliance en
17
1. Pull out the detergent drawer as far
as possible.
2. Add detergent and/or care products.
3. Close the detergent drawer.
Measuring aid* for liquid detergent
*Depending on the model
Position the measuring aid for
measuring the correct amount of liquid
detergent:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. Slide the measuring aid forwards,
fold it down and click it into place.
3. Reinsert the drawer.
Note: Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash or when
"Finish in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Press the A button. The indicator lamp
lights up and the program starts.
The display panel shows the Finish in
time while the program is running or the
program duration and the program
progress symbols once the wash cycle
has started.
Note: Foam detection
If the Åsymbol also lights up in the
display panel, the washing machine has
detected too much foam during the
wash cycle and automatically activated
additional rinse cycles to remove the
foam.
Add less detergent to the next wash
cycle with the same load.
If you want to lock the program to
prevent it from being inadvertently
adjusted, you can select the childproof
lock as follows.
Childproof lock
(E 3 sec.)
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock when the
program has started.
To activate/deactivate, press and hold
the 0 rpm//0 Spin Speed and
ñ Ready in//Finished in buttons at the
same time for approx. three seconds.
The E symbol appears in the display
panel.
■ E lights up: The childproof lock is
active.
■ E flashes: The childproof lock is
active and the program selector has
been adjusted.To deactivate the
childproof lock, reset the program
selector to the initial program. The
symbol lights up again.
Note: To avoid the program to
terminate, do not turn the program
selector beyond the Off position.
Note: The childproof lock remains
active after the program has ended and
the appliance is switched off. You must
always deactivate the childproof lock if
you want to start a new program.
en Operating the appliance
18
Adding/removing laundry
Following the start of the program, you
can add or remove laundry as required.
Press the A button to do this.
The A button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
If the following appears in the display
panel:
■ the è symbol disappears, and
adding is possible.
■ the è symbol lights up, it is not
possible to add laundry.
To continue the program, press the
button A. The program continues
automatically.
Notes
■ Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■ For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
■ The load display is not active during
reloading.
Changing the programme
1. Press the A button.
2. Select another program.
3. Press the A button.The new
program starts from the beginning.
Cancel the programme
For programs at high temperature:
1. Press the A button.
2. To cool down laundry: Select
' Rinse/Freshen up//Rinse.
3. Press the A button.
For programs at low temperature:
1. Press the A button.
2. Select 0 Spin/Drain [.
3. Press the A button.
Programme end during rinse
hold
- - - - 0 appears in the display panel and
the indicator lamp of the A button
flashes.
Continue the program by:
■ Pressing the A button or
■ Selecting a spin speed or setting the
program selector to 0 Spin/Drain [
and then pressing the A button.
Programme end
End appears in the display panel and the
indicator lamp of the A button is off.
Removing laundry/switching
off the appliance
1. Open the washing machine door and
remove the laundry.
2. Turn the programme selector to Off.
Appliance is switched off.
3. Turn off the tap.
Not required for Aqua-Stop models.
Contents of package
Notes
– Do not leave any items of laundry
in the drum. They may shrink in the
next wash or discolour another
item.
– Remove any foreign objects from
the drum and the rubber seal – risk
of rusting.
– Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked. Switch the appliance on
and wait for the unlocking device.
– If at the end of the programme the
display has gone out, the energy
saving mode is active. To activate,
select any button.
Setting the signal en
19
M Setting the signal
Setti ng the signal
You can change the following settings:
■ The volume for the information
signals (e.g. at the end of the
program) and/or
■ The volume of the audible button
signals.
You will need to activate the setting
mode in order to change these settings.
Activate setting mode:
1. Set the program selector to
position 1. The washing machine is
switched on.
2. Press the A button and, at the
same time, turn the program selector
clockwise to position 2. Release the
button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel
(e.g. at the end of the program).
Changing the volume
Use the ñ Ready in//ñ Finished in + or
- button to change the following settings
at the corresponding program selector
positions:
■ 2: The volume of the information
signals and/or
■ 3: The volume of the button signals.
Exiting setting mode
You can now end the process and set
the program selector to the Off position.
The settings are saved.
H Sensors
Sensors
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Note: Place large and small items of
laundry evenly in the drum.
Faults and what to do about them
~ Page 22
1/2/3/... positions on the program
selector
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
en Cleaning and maintenance
20
2 Cleaning and
maintenance
Cleaning and maintenance
:Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and unplug the
mains plug.
:Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
■ Wipe the housing and the control
panel with a soft, damp cloth.
■ Remove the detergent residue
immediately.
■ Do not clean with a water jet.
Drum
Use chlorine-free cleaning agents, do
not use steel wool.
If there are odours in the washing
machine, or to clean the drum, run the
Û Drum Clean 90 °C or
i Cottons 90 °C program without
laundry. Add washing powder.
Descaling
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
after-sales service ~ Page 25
Detergent drawer and housing
If the washing machine contains
detergent or fabric softener residues:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. To remove the insert: Push the insert
upwards from below with your finger.
3. Clean the detergent dispenser tray
and insert with water and a brush,
and dry it. Clean the inside of the
housing as well.
4. Fit the insert and lock it in place
(push the cylinder onto the guide
pin).
5. Push in the detergent drawer.
Note: Leave the detergent drawer open
so that any residual water can
evaporate.
Detergent solution pump
blocked
:Warning
Risk of scalding!
When you wash at high temperatures,
the water gets very hot. If you come into
contact with the hot water, you may be
scalded.
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Bosch WAP28482AU/01 Guida d'installazione
- Categoria
- Lavatrici
- Tipo
- Guida d'installazione
in altre lingue
Documenti correlati
-
Bosch BOSCH WM User manual and assembly instructions
-
-
Bosch WAT24465IN/05 Guida d'installazione
-
Bosch WAJ2006WIN/09 Guida d'installazione
-
-
-
-
-
-