Panasonic TX40C200E Manuale del proprietario

OPERATING INSTRUCTIONS

MODE D’EMPLOI

MANUAL DE FUNCIONAMIENTO

INSTRUÇÕES DE UTILIZAÇÃO

ISTRUZIONI DI FUNZIONAMENTO

HANDLEIDING

UŽIVATELSKÁ PŘÍRUČKA

TX-40C200E

COLOUR TELEVISION WITH REMOTE CONTROL

TÉLÉVISEUR COULEUR AVEC TÉLÉCOMMANDE

TELEVISOR A COLOR CON MANDO A DISTANCIA

TELEVISÃO A CORES COM CONTROLO REMOTO

TELEVISIONE A COLORI CON TELECOMANDO

TELEVISIE MET AFSTANDSBEDIENING

BAREVNÝ TELEVIZOR S DÁLKOVÝM OVLÁDÁNÍM

English - 2 -

Contents

Safety Information ..................................................3

Markings on the Product.........................................3

Maintenance ........................................................... 4

Mains plug ..............................................................5

Assembling / Removing the pedestal .....................5

When using the wall-hanging bracket.....................5

Environmental Information......................................6

Standby Notications ..............................................6

Features .................................................................6

Accessories Included..............................................6

TV Control Buttons & Operation ............................. 6

Inserting the Batteries into the Remote ..................7

Connect Power ...................................................... 7

Notication .............................................................. 7

Specication ...........................................................8

Remote Control ......................................................9

Connections.......................................................... 11

Switching On/Off ...................................................12

First Time Installation............................................12

Media Playback via USB Input .............................12

Media Player Menu...............................................12

General TV Operation ..........................................16

Using the Channel List .........................................16

Conguring Parental Settings ...............................16

Electronic Programme Guide (EPG) ....................16

Software Upgrade.................................................16

Troubleshooting & Tips ......................................... 17

PC Input Typical Display Modes ........................... 17

AV and HDMI Signal Compatibility .......................17

Supported File Formats for USB Mode ................18

English - 3 -

Safety Information

Don’t operate your TV in extreme ambient

conditions as this may cause damage to your TV.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note: Follow the on screen instructions for operating the

related features.

In extreme weather (storms, lightning) and long

inactivity periods (going on holiday) disconnect

the TV set from the mains. The mains plug is

used to disconnect TV set from the mains and

therefore it must remain readily operable.

This sign is present wherever there is very

important information on operation and

maintenance of the appliance in the literature

accompanying it.

IMPORTANT - Please read these

instructions fully before installing or

operating

WARNING: Never let people (including

children) with reduced physical, sensory or

mental capabilities or lack of experience and / or

knowledge use electrical devices unsupervised.

• For ventilation purposes, leave a free space of at

least 10 cm all around the set.

• Do not block ventilation holes.

• Do not place the TV on sloping or unstable surfaces,

the TV may tip over.

• Use this device in moderate climates.

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord.

A damaged power cord/plug can cause re or give

you an electric shock. Handle the power cord by the

plug, do not unplug the TV by pulling the power cord.

Never touch the power cord/plug with wet hands

as this could cause a short circuit or electric shock.

Never make a knot in the power cord or tie it with

other cords. When damaged it must be replaced,

this should only be done by qualied personnel.

• Do not use this TV in a humid or damp environment.

Do not expose the TV to liquids. In case the cabinet

contacts any liquids unplug the TV immediately

and have it checked by qualied personnel before

operating it any further.

• Do not expose the TV to direct sunlight,

open ames or place it near intense heat

sources such as electric heaters.

• Listening in excessive volumes from earphones and

headphones may cause hearing loss.

• Ensure that no open ame sources, such

as lit candles, are placed on top of the TV.

• To prevent injuries, this TV must be securely

attached to a wall by carefully following the

instructions (if the option is available).

• Occasionally, a few non-active pixels may appear

on the screen as a xed blue, green or red point.

Please note that this does not affect the performance

of your product. Take care not to scratch the screen

with ngernails or other hard objects.

• Before cleaning, unplug the TV from the wall socket.

Only use a soft, dry cloth while cleaning.

Warning

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Caution

Injury or property damage risk

Important

Operating the system correctly

Notice

Additional notes marked

Markings on the Product

The following symbols are used on the product as

a marker for restrictions and precautions and safety

instructions. Each explanation shall be considered

where the product bears related marking only. Note

such information for security reasons.

Class II Equipment: This appliance is

designed in such a way that it does not require

a safety connection to electrical earth.

Class II Equipment With Functional

Earthing: This appliance is designed in such

a way that it does not require a safety

connection to electrical earth, the earth connection is

used for functional purposes.

Protective Earth Connection: The marked

terminal is intended for connection of the

protective earthing conductor associated with

the supply wiring.

Hazardous Live Terminal: The marked

terminal(s) is/are hazardous live under normal

operating conditions.

Caution, See Operating Instructions: The

marked area(s) contain(s) user replaceable

coin or button cell batteries.

Class 1 Laser Product:

This product contains Class

1 laser source that is safe

under reasonably foreseeable

conditions of operation.

i

CLASS 1

LASER PRODUCT

English - 4 -

WARNING

Do not ingest the battery, Chemical Burn

Hazard

(The accessories supplied with or) This pro-

duct may contain a coin/button cell battery.

If the coin/button cell battery is swallowed,

it can cause severe internal burns in just 2

hours and can lead to death.

Keep new and used batteries away from

children.

If the battery compartment does not close

securely, stop using the product and keep it

away from children.

If you think batteries might have been swal-

lowed or placed inside any part of the body,

seek immediate medical attention.

WARNING

Never place a television set in an unstable

location. A television set may fall, causing

serious personal injury or death. Many inju-

ries, particularly to children, can be avoided

by taking simple precautions such as;

• Using cabinets or stands recommended by

the manufacturer of the television set.

• Only using furniture that can safely support

the television set.

• Ensuring the television set is not overhanging

the edge of the supporting furniture.

• Not placing the television set on all furniture

(for example, cupboards or bookcases)

without acnhoring both the furniture and the

television set to a suitable support.

• Educating children about the dangers of

climbing on furniture to reach the television

set or its controls.

If your existing television set is being retained and

relocated, the same considerations as above should

be applied.

Maintenance

First, remove the mains plug from the mains

socket.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet,

or pedestal by using a soft cloth to remove dirt or

ngerprints.

For stubborn dirt:

1. First clean the dust from the surface.

2. Dampen a soft cloth with clean water or diluted

neutral detergent (1 part detergent to 100 parts

water).

3. Wring out the cloth rmly. (Please note, do not

let liquid enter the TV inside as it may lead to

product failure.)

4. Carefully wipe moisten and wipe away the

stubborn dirt.

5. Finally, wipe away all the moisture.

Caution

Do not use a hard cloth or rub the surface too hard,

otherwise this may cause scratches on the surface.

• Take care not to subject the surfaces to insect

repellent, solvent, thinner or other volatile

substances. This may degrade surface quality or

cause peeling of the paint.

• The surface of the display panel is specially treated

and may be easily damaged. Take care not to tap

or scratch the surface with your ngernail or other

hard objects.

• Do not allow the cabinet and pedestal to make

contact with a rubber or PVC substance for a long

time. This may degrade surface quality.

English - 5 -

Mains plug

Wipe the mains plug with a dry cloth at regular

intervals.

Moisture and dust may cause re or electrical shock.

Assembling / Removing the pedestal

Preparations

Take out the pieces of the pedestals and the TV from

the packing case and put the TV onto a work table

with the screen panel down on the clean and soft

cloth (blanket, etc.)

• Use a at and rm table bigger than the TV.

• Do not hold the screen panel part.

• Make sure not to scratch or break the TV.

Assembling the pedestal

1. Screw the pieces of the pedestals together and

mount the rubber buffers.

2. Place the stand(s) on the stand mounting

pattern(s) on the rear side of the TV.

3. Insert the screws (M4 x 12) provided and tighten

them gently until the stand is properly tted.

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way

when using the wall-hanging bracket or repacking

the TV.

• Put the TV onto a work table with the screen panel

down on the clean and soft cloth. Leave the stand(s)

protruding over the edge of the surface.

• Unsrew the screws that xing the stand(s).

• Remove the stand(s).

When using the wall-hanging bracket

Please contact your local Panasonic dealer to

purchase the recommended wall-hanging bracket.

Holes for wall-hanging bracket installation;

Rear of the TV

a

b

a (mm) 200

b (mm) 200

View from the side

a

Depth of

screw (a)

min. (mm) 5

max. (mm) 10

Diameter M6

Note: The screws for xing the TV onto the wall-hanging

bracket are not supplied with the TV.

English - 6 -

Environmental Information

This television is designed to be environment friendly.

To reduce energy consumption, you can follow these

steps:

If you set the Power Save Mode to Eco, the TV will

switch to energy-saving mode. The Power Save

Mode settings can be found in the ‘Picture’ section

of the Main Menu. Note that some picture settings will

be unavailable to be changed.

If pressed Right button while Eco option is selected

or Left button while Disabled option is selected,

“Screen will be off in 15 seconds.” message will be

displayed on the screen. Select Proceed and press

OK to turn the screen off immediately. If you don’t

press any button, the screen will be off in 15 seconds.

Press any button on the remote or on the TV to turn

the screen on again.

Note: If the Mode in the Picture menu is set to Dynamic,

Power Save Mode will be set as Disabled and can not be

changed.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

Standby Notications

1. If the TV does not receive any input signal (e.g.

from an aerial or HDMI source) for 5 minutes, it

will go into standby. When you next switch-on,

the following message will be displayed: “TV

switched to stand-by mode automatically

because there was no signal for a long time.”

Press OK to continue.

2. If the TV is on and it isn’t being operated for a while

it will go into standby. When you next switch-on,

the following message will be displayed. “TV

switched to stand-by mode automatically

because no operation was made for a long

time.” Press OK to continue.

Features

• Remote controlled colour TV

• Fully integrated digital terrestrial/cable TV (DVB-T/C)

• HDMI input to connect other devices with HDMI

socket

• USB input

• OSD menu system

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to six hours.

• Sleep timer

• Child lock

• Automatic sound mute when no transmission.

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

Accessories Included

• Remote Control

• Batteries: 2 x AAA

• Instruction Book

• Detachable stand

• Stand mounting screws (M4 x 12)

TV Control Buttons & Operation

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection

switch

The Control button allows you to control the Volume/

Programme/ Source and Standby-On functions of

the TV.

To change volume: Increase the volume by pushing

the button up. Decrease the volume by pushing the

button down.

To change channel: Press the middle of the button,

the channel information banner will appear on screen.

Scroll through the stored channels by pushing the

button up or down.

To change source: Press the middle of the button

twice, the source list will appear on screen. Scroll

through the available sources by pushing the button

up or down.

To turn the TV off: Press the middle of the button

down and hold it down for a few seconds, the TV will

turn into standby mode.

English - 7 -

Operation with the Remote Control

• Press Menu button on your remote control to display

main menu screen. Use Left or Right button to

select a menu tab and press OK to enter. Use Left

/ Right / Up / Down to select or set an item. Press

Return/Back button or Menu button to quit a menu

screen.

• Once you have connected external systems to your

TV, you can switch to different input sources. Press

Source button on your remote control consecutively

to select the different sources.

• You can change the channel and adjust the volume

by using the Volume +/- and Programme +/- buttons

on the remote.

Inserting the Batteries into the Remote

Lift the cover on the back of the remote gently. Insert

two AAA batteries. Make sure the (+) and (-) signs

match (observe correct polarity). Place the cover

back on.

Connect Power

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz socket. After unpacking, allow

the TV set to reach the ambient room temperature

before you connect the set to the mains. Plug the

power cable to the mains socket outlet.

Antenna/Cable Connection

Connect the “aerial” or “cable TV” plug to the AERIAL

INPUT (ANT) socket located on the back of the TV.

Notication

TRADEMARK ACKNOWLEDGMENT

The terms HDMI and High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the

United States and other countries.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

Disposal of Old Equipment and Batteries

Only for European Union and countries

with recycling systems

These symbols on the products,

packaging, and/or accompanying

documents mean that used electrical

and electronic products and batteries

must not be mixed with general

household waste.

For proper treatment, recovery and

recycling of old products and batteries,

please take them to applicable

collection points in accordance with

your national legislation.

By disposing of them correctly, you will

help to save valuable resouces and

prevent any potential negative effects

on human health and the environment.

For more information about collection

and recycling, please contact your local

municipality.

Penalties may be applicable for

incorrect disposal of this waste, in

accordance with national legislation.

Note for the battery symbol

(bottom symbol):

This symbol might be used in

combination with a chemical symbol.

In this case it complies with the

requirement set by the Directive for

the chemical involved.

Authorized Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Web Site: http://www.panasonic.com

English - 8 -

Specication

TV Broadcasting PAL B/G D/K K I/I’

Receiving Channels

VHF (BAND I/III) - UHF

(BAND U) - HYPERBAND

Digital Reception

Fully integrated digital

terrestrial-cable TV

(DVB-T-C)

Number of Preset

Channels

1000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio German+Nicam Stereo

Headphone 3.5 mm mini stereo jack

Audio Output Power

(WRMS.) (10% THD)

2 x 8

Power Consumption 75 W

Weight 7,5 Kg

TV Dimensions DxLxH

(with foot)

260 x 923 x 608 mm

TV Dimensions DxLxH

(without foot)

60/90 x 923 x 544 mm

Operation temperature

and operation

humidity:

0ºC up to 40ºC, 85%

humidity max

English - 9 -

Remote Control

1. Standby: Switches On / Off the TV

2. Numeric buttons: Switches the channel, enters a

number or a letter in the text box on the screen.

3. TV: Displays channel list / Switches to TV Source

4. Mute: Completely turns off the volume of the TV

5. Volume +/-

6. Menu: Displays TV menu

7. Navigation buttons: Helps navigate menus, content

etc. and displays the subpages in TXT mode when

pressed Right or Left

8. OK: Conrms user selections, holds the page (in TXT

mode), views channel list (DTV mode)

9. Back/Return: Returns to previous screen, opens index

page (in TXT mode)

10. Media player: Opens the media player screen

11. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

12. My button 1 (*)

13. Coloured Buttons: Follow the on-screen instructions

for coloured button functions

14. Language: Switches between sound modes (analogue

TV), displays and changes audio/subtitle language

(digital TV, where available)

15. Subtitles: Turns subtitles on and off (where available)

16. Rapid reverse: Moves frames backwards in media

such as movies

17. No function

18. Play: Starts to play selected media

19. Stop: Stops the media being played

20. Rapid advance: Moves frames forward in media such

as movies

21. Pause: Pauses the media being played

22. Screen: Changes the aspect ratio of the screen

23. Text: Displays teletext (where available), press again

to superimpose the teletext over a normal broadcast

picture (mix)

24. No function

25. EPG (Electronic programme guide): Displays the

electronic programme guide

26. Exit: Closes and exits from displayed menus or returns

to previous screen

27. Quick Menu: Displays a list of menus for quick access

28. No function

29. Programme +/-

30. Swap: Quickly cycles between previous and current

channels or sources

31. Source: Shows all available broadcast and content

sources

(*) MY BUTTON 1:

This button may have a default function depending on the

model. However you can set a special function to this button

by pressing on it for ve seconds when on a desired source

or channel. A conrmation message will be displayed on

the screen. Now the My Button 1 is associated with the

selected function.

Note that if you perform First Time Installation, My Button

1 will return to its default function.

English - 10 -

Quick Menu

Quick Settings menu allows you to access some

options quickly. This menu includes Power Save

Mode, Picture Mode, Equalizer Settings, Favourites

and Sleep Timer options. Press Quick Menu button

on the remote control to view quick menu. See the

following chapters for the details of the listed features.

Teletext

Press the Text button to enter. Press again to activate

mix mode, which allows you to see the teletext page

and the TV broadcast at the same time. Press once

more to exit. If available, sections in the teletext pages

will become colour-coded and can be selected by

pressing the coloured buttons. Follow the instructions

displayed on the screen.

Digital Teletext

Press the Text button to view digital teletext

information. Operate it with the coloured buttons,

cursor buttons and the OK button. The operation

method may differ depending on the contents of the

digital teletext. Follow the instructions displayed on

the digital teletext screen. When the Text button is

pressed again, the TV returns to television broadcast.

English - 11 -

Connections

Connector Type Cables Device

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

PC/YPbPr

Audio

Connection

(side)

Side Audio YPbPr or PC

Connection Cable

HDMI

Connection

(back)

SPDIF

Connection

(back)

SIDE AV

Side AV

(Audio/Video)

Connection

(side)

HEADPHONE

Headphone

Connection

(side)

PC to YPbPr

YPbPr Video

Connection

(back)

PC to YPbPr Connection Cable

USB

Connection

(side)

CI

Connection

(side)

CAM

module

NOTE: When connecting

a device via the YPbPr or Side

AV input, you must use the

connection cables to enable

connection. See the illustrations

on the left side. | You can use

YPbPr to VGA cable (not supplied)

to enable YPbPr signal via VGA

input. | You cannot use VGA and

YPbPr at the same time. | To

enable PC audio, you will need

to use the YPBPR/PC AUDIO

CONNECTION cable’s WHITE &

RED inputs. | If an external device

is connected via the SCART

socket, the TV will automatically

switch to AV mode.| When

receiving DTV channels (Mpeg4

H.264) or while in Media Player

mode, output will not be available

via the scart socket. | When using

the wall mounting kit (optional),

we recommend that you plug all

your cables into the back of the

TV before mounting on the wall.

| Insert or remove the CI module

only when the TV is SWITCHED

OFF. You should refer to the

module instruction manual for

details of the settings. | The/Each

USB input of your TV supports

devices up to 500mA. Connecting

devices that have current value

above 500mA may damage your

TV. | By connecting an HDMI cable

to your TV, you have to use only a

shielded HDMI cable to guarantee

a sufficient immunity against

parasitic frequency radiation.

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making

any connection. After the connection is done, you can turn on the units and use them.

English - 12 -

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50 Hz.

To switch on the TV from standby mode either:

Press the “

” button, P+ / P- or a numeric button on

the remote control.

Press the side function switch until the TV comes on

from standby.

To Switch the TV Off

Press the “ “ button on the remote control or press

the side function switch until the TV switches into

standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode, the standby

LED can blink to indicate that features such as Standby

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using the

navigation buttons and when nished, press OK to

continue.

Note: Depending on the Country selection you may be asked

to set and conrm a PIN at this point. The selected PIN cannot

be 0000. You have to enter it if you are asked to enter a PIN

for any menu operation later.

You can activate Store Mode option at this point. This

option will congure your TV’s settings for best display

quality. This option is intended only for store use. It is

recommended to select Home Mode for home use.

If Store Mode is selected, a conrmation screen will

be displayed. Select YES to proceed. This option

will be available in Other Settings menu and can be

turned off/on later.

Aerial Installation

If you select Aerial option from the search type selection

screen, the television will search for digital terrestrial

TV broadcasts. After all the available stations are

stored, the Edit Channel List will be displayed on

the screen.

Press Menu button to quit Edit Channel List and

watch TV.

Cable Installation

If you select Cable option and press OK button on

the remote control, a conrmation screen will be

displayed. Select YES and press OK to proceed.

To cancel operation, select NO and press OK. You

can select frequency ranges from next screen. Enter

the frequency range manually by using the numeric

buttons. When nished, press OK button to start

automatic search.

Note: Searching duration will change depending on the

selected search step.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT! Back up the les on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting..

While formatting USB hard drives which have

more than 1TB (Tera Byte) storage space you may

experience some problems in the formatting process.

Wait a little while before each plugging and unplugging

as the player may still be reading les . Failure to do

so may cause physical damage to the USB player

and USB device itself. Do not pull out your drive while

playing a le.

Note: When viewing image les the Media Player menu

can only display 1000 image les stored on the connected

USB device.

Media Player Menu

You can play photo, music, and movie les stored on a

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. You can set your Media Player preferences

by using the Settings menu.

Loop/Shufe Mode Operation

Start playback with the Play

button and activate

TV plays next le and loop

the list

Start playback with the OK

button and activate

The same le will be played in

a loop (repeat)

Start playback with the OK/

Play buttons and activate

The le will be played in a

shufe

English - 13 -

TV Menu Contents

Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode

can be set to one of these options: Cinema, Game, Dynamic and Natural.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colors.

Power Save Mode

For setting the Power Save Mode to Eco, Picture Off or Disabled.

(When the Mode is Dynamic, Power Save Mode is automatically set as Disabled.)

Backlight (Optional)

This setting controls the backlight level. The backlight function will be inactive if the

Power Save Mode is set to Eco. The backlight cannot be activated in VGA, Media

Player Mode or while the picture mode is set to Game.

Noise Reduction

If the broadcast signal is weak and the picture is noisy, use the Noise Reduction

setting to reduce the amount of noise.

Advanced Settings

Dynamic Contrast

You can change the dynamic contrast ratio to desired value.

Colour Temp

Sets the desired colour tone.

Picture Zoom

Sets the desired picture size from Picture Zoom menu.

Note: Auto option is only available in Scart mode with SCART PIN8 high voltage/low voltage

switching.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching lms to see the fast motion scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

RGB Gain

You can congure the colour temperature values using the RGB Gain feature.

HDMI True Black

While watching from a HDMI source, this feature will be visible in the Picture Settings menu.

You can use this feature to enhance blackness in the picture.

PC Position

Appears only when the input source is set to VGA/PC.

Autoposition

Automatically optimizes the display. Press OK to optimize.

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy picture on the

screen. You can use phase to get a clearer picture by trial and error.

Reset

Resets the picture settings to factory default settings (except Game Mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture

Settings while in PC mode.

English - 14 -

Sound Menu Contents

Volume

Adjusts the volume level.

Equalizer

Selects the equalizer mode. Custom settings can be made only when in User mode.

Balance

Adjusts whether the sound comes from the left or right speaker.

Headphone

Sets headphone volume.

Sound Mode

You can select a sound mode (If the viewed channel supports).

AVL (Automatic

Volume Limiting)

Function sets the sound to obtain xed output level between programmes.

Digital Out

Sets digital out audio type.

Settings Menu Contents

Conditional Access

Controls conditional access modules when available.

Language

You may set a different language depending on the broadcaster and the country.

Parental

Enter correct password to change parental settings. You can easily adjust menu lock

in this menu. You can also set new pin number.

Timers

Sets sleep timer to turn off the TV after a certain time. Sets timers for selected

programmes.

Date/Time

Sets date and time.

Sources

Enables or disables selected source options.

Other Settings

Displays other setting options of the TV.

Menu Timeout

Changes timeout duration for menu screens.

Scan Encrypted

Channels

When this setting is on, the search process will locate the encrypted channels as

well.

Blue Background

Activates or deactivates the blue background system when the signal is weak or absent.

Software Upgrade

Ensures that your TV has the latest rmware.

Application

Version

Displays application version.

Hard of Hearing

Enables any special feature sent from the broadcaster.

Audio

Description

A norration track will be played for the blind or visually impaired audience. This

feature is available only if the broadcaster supports it.

Auto TV Off

Sets the desired time for the TV to automatically go into standby mode when not

being operated.

Standby Search

(Optional)

Your TV will search for new or missing channels while in standby. Any new found

broadcasts will be shown.

Store Mode

Select this mode for store display purposes. Whilst Store Mode is enabled, some

items in the TV menu may not be available.

Power Up Mode

This setting congures the power up mode preference.

English - 15 -

Install and Retune Menu Contents

Automatic Channel

Scan (Retune)

(If available)

Displays automatic tuning options. Digital Aerial: Searches and stores aerial

DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue:

Searches and stores analogue stations. Digital Aerial & Analogue: Searches and

stores aerial DVB and analogue stations. Digital Cable & Analogue: Searches and

stores cable DVB and analogue stations.

Manual Channel Scan

This feature can be used for direct broadcast entry.

Network Channel

Scan

Searches for the linked channels in the broadcast system.

Analogue Fine Tune

You can use this setting for ne tuning analogue channels. This feature is not

available if no analogue channels are stored.

First Time Installation

Deletes all stored channels and settings, resets TV to factory settings.

English - 16 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel

List options.

Conguring Parental Settings

To prohibit viewing of certain programmes, channels and

menus can be locked by using the parental control system.

To display parental lock menu options, the PIN number

should be entered. The factory default PIN number is

0000. After coding the correct PIN number, Parental

Settings menu will be displayed.

Menu Lock: Menu lock setting enables or disables

the menu access.

Maturity Lock: Restricts access to broadcasts

displaying mature content.

Child Lock: Control buttons on the TV are disabled

and only remote control operation is available.

Set PIN: Denes a new PIN number.

Default PIN code can change depending on the

selected country.

If you are asked to enter a PIN code for viewing a menu

option, use one of the following codes: 4725, 0000 or 1234.

Some options may not be available depending on the country

selection in the First Time Installation.

Electronic Programme Guide (EPG)

Some channels send information about their

broadcast schedules. Press the Epg button to view

the Programme Guide menu.

There are 3 different types of schedule layouts

available, Timeline Schedule, List Schedule and

Now/Next Schedule. To switch between them follow

the instructions on the bottom of the screen.

Timeline Schedule

Prev Day (Red button): Displays the programmes

of previous day.

Next day (Green button): Displays the programmes

of the next day.

Zoom (Yellow button): Press the Yellow button to

see events in a wider time interval.

Filter (Blue button): Views ltering options.

Select Genre (Subtitles button): Displays Select

Genre menu. Using this feature, you can search the

programme guide database in accordance with the

genre. Info available in the programme guide will

be searched and results matching your criteria will

be listed.

Event Details (Info button): Displays detailed

information about selected events.

Jump (Numeric Buttons): Jumps to the preferred

channel directly via numeric buttons.

Options (OK button): Displays event options.

Search (Text button): Displays Guide Search menu.

Now (Swap button): Displays current event of the

highlighted channel.

List Schedule(*)

(*) In this layout option, only the events of the highlighted

channel will be listed.

Prev. Time Slice (Red button): Displays the events

of previous time slice.

Prev Day (Yellow button): Displays the events of

previous day.

Jump (Numeric Buttons): Jumps to the preferred

channel directly via numeric buttons.

Event Details (Info button): Displays detailed

information about selected events.

Filter (Text button): Views ltering options.

Next Time Slice (Green button): Displays the events

of next time slice.

Next Day (Blue button): Displays the events of

next day.

Options (OK button): Displays event options.

Programme +/-

: More event info

Now/Next Schedule

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected events.

Programme +/-: More event info

Filter (Blue button): Views ltering options.

Event Options

Use the directional buttons to highlight an event and

press OK button to display Event Options menu. The

following options are available.

Select Channel: Using this option, you can switch to

the selected channel.

Set Timer on Event / Delete Timer on Event: After

you have selected an event in the EPG menu, press the

OK button. Select Set Timer on Event option and press

the OK button. You can set a timer for future events.

To cancel an already set timer, highlight that event and

press the OK button. Then select Delete Timer on

Event option. The timer will be cancelled.

Software Upgrade

Your TV is capable of nding and updating automatically

via the broadcast signal.

Software upgrade search via user interface

On the main menu choose Settings and select Other

Settings. Navigate to Software Upgrade.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock if

Automatic scanning option in the Upgrade options

menu is set to Enabled and if the TV is connected to

an aerial signal.

Note: If the TV fails to come on after the upgrade, unplug,

wait for two minutes then plug it back in.

English - 17 -

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to

wall outlet. Check if batteries are exhausted. Press

the Power button on the TV.

Poor picture

• Check if you have selected the correct TV system.

• Low signal level can cause picture distortion. Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

• The picture quality may degrade when two devices

are connected to the TV at the same time. In such

a case, disconnect one of the devices.

No picture

• This means your TV is not receiving any transmission.

Make sure the correct source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Check if the TV is muted. Press the Mute button or

increase the volume to check.

• Sound may be coming from only one speaker. Check

the balance settings from sound menu.

Remote control - no operation

• The batteries may be exhausted. Replace the

batteries.

Input sources - can not be selected

• If you cannot select an input source, it is possible

that no device is connected. If not;

• Check the AV cables and connections if you have

tried to connect a device.

PC Input Typical Display Modes

The following table is an illustration of some of the

typical video display modes. Your TV may not support

all resolutions. Your TV supports up to 1920x1080.

Index Resolution Frequency

1 640x480 60 Hz

2 800x600 56 Hz

3 800x600 60 Hz

4 1024x768 60 Hz

5 1024x768 66 Hz

6 1280x768 60 Hz

7 1280x960 60 Hz

8 1280x1024 60 Hz

9 1360x768 60 Hz

10 1400x1050 60 Hz

11 1600x1200 60 Hz

12 1920x1080 60 Hz

AV and HDMI Signal Compatibility

Source Supported Signals Available

EXT

(SCART)

PAL 50/60 O

NTSC 60 O

RGB 50 O

RGB 60 O

Side AV

PAL 50/60 O

NTSC 60 O

PC/

YPbPr

480I, 480P 60Hz O

576I, 576P 50Hz O

720P 50Hz,60Hz O

1080I 50Hz,60Hz O

1080P 50Hz,60Hz O

HDMI

480I 60Hz O

480P 60Hz O

576I, 576P 50Hz O

720P 50Hz,60Hz O

1080I 50Hz,60Hz O

1080P

24Hz, 25Hz

30Hz, 50Hz,

60Hz

O

(X: Not Available, O: Available)

In some cases a signal on the TV may not be displayed

properly. The problem may be an inconsistency with standards

from the source equipment (DVD, Set-top box, etc. ). If you

do experience such a problem please contact your dealer and

also the manufacturer of the source equipment.

English - 18 -

Supported File Formats for USB Mode

Media Extension Format Notes

Video .mpg,

.mpeg

MPEG1-2 MPEG1: 768x576 @ 30P, MPEG2:1920x1080 @ 30P

.vob MPEG2

1920x1080 @ 30P

.mp4 MPEG4, Xvid,

H.264

.mkv H.264,

MPEG4,VC-1

.avi MPEG2,

MPEG4, Xvid,

H.264

.v H.264/VP6/

Sorenson

H.264/VP6: 1920x1080 @ 30P

Sorenson: 352x288 @ 30P

.3gp MPEG4 , H.264 1920x1080 @ 30P

Audio .mp3 MPEG1 Layer

2/3

Layer2: 32Kbps ~ 448Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz, 16kHz,

22.05kHz, 24kHz (Sampling rate)

Layer3: 32Kbps ~ 320Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz, 16kHz,

22.05kHz, 24kHz, 8kHz, 11.025kHz, 12kHz (Sampling rate)

(works

only with

video

les)

AC3 32Kbps ~ 640Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)

AAC 16Kbps ~ 576Kbps (Bit rate) / 48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz,

16kHz, 12kHz, 11.025kHz, 8kHz (Sampling rate)

EAC3 32Kbps ~ 6Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)

LPCM Unsigned 8bit PCM, Signed/Unsigned 16bit PCM (big / little endian), 24bit

PCM (big endian), DVD LPCM 16/20/24bit (Bit rate)

/ 6kHz, 8kHz, 11.025kHz, 12kHz, 16kHz, 22.05kHz, 24kHz, 32kHz,

44.1kHz, 48kHz , 88.2kHz, 96kHz, 176.4kHz, 192kHz (Sampling rate)

IMA-ADPCM/

MS-ADPCM

384Kbps (Bit rate) / 8KHz ~ 48Khz (Sampling rate)

LBR

32Kbps ~ 96Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate)

Picture

.jpeg

Baseline Resolution(WxH): 17000x10000

Progressive Resolution(WxH): 4000x4000

.bmp

-

Resolution(WxH): 5760x4096

Subtitle

.sub, .srt - -

Français - 19 -

Table des matières

Consignes de Sécurité .........................................20

Symboles sur le Produit........................................20

Entretien ...............................................................21

Prise d’alimentation ..............................................22

Montage/Retrait du socle......................................22

Lors de l'utilisation de la xation murale ............... 22

Informations sur l'environnement .........................23

Notications de Veille ...........................................23

Fonctions .............................................................. 23

Accessoires inclus ................................................ 23

Boutons de commande et Fonctionnement de TV 23

Insertion des Piles dans la Télécommande .......... 24

Connectez l'alimentation .....................................24

Notication ............................................................ 24

Spécications .......................................................25

Télécommande ..................................................... 26

Connexions...........................................................28

Marche/Arrêt ......................................................... 29

Première Installation .............................................29

Lecture de Média via entrée USB.........................29

Menu Lecteur multimédia .....................................29

Fonctionnement général de la TV ........................33

Utilisation de la Liste de Vhaînes .........................33

Conguration des paramètres parentaux .............33

Guide des Programmes Electroniques (EPG) ......33

Mise à Jour du Logiciel .........................................33

Dépannage et Astuces .........................................34

Modes D’afchage Typiques de I’entrée PC ........34

Compatibilité des Signaux AV et HDMI ................34

Formats de Fichier pris en Charge pour le Mode

USB ......................................................................35

Français - 20 -

Consignes de Sécurité

Le fait de faire fonctionner votre téléviseur dans des

conditions ambiantes extrêmes peut l’endommager.

AVERTISSEMENT

RISQUE D'ÉLECTROCUTION

NE PAS OUVRIR

AVERTISSEMENT : POUR ÉVITER TOUT RISQUE D’ÉLECTROCUTION,

NE RETIREZ PAS LE COUVERCLE (OU L'ARRIÈRE).

AUCUNE PIÈCE À ENTRETENIR CHEZ SOI ; VEUILLEZ

CONFIER L'ENTRETIEN À UN PERSONNEL QUALIFIÉ.

Remarque : Respectez les consignes à l'écran an d'utiliser

les fonctions y relatives.

Pendant des phénomènes météorologiques

extrêmes (tempêtes, foudre) et de longues périodes

d'inactivité (aller en vacances), débranchez le

téléviseur du secteur. La prise d’alimentation

est utilisée pour débrancher le téléviseur de

l’alimentation secteur et doit donc rester facilement

accessible.

Ce signal apparaît chaque fois que vous avez

besoin d'importantes informations concernant

le fonctionnement et l'entretien de l'appareil,

contenues dans le manuel fourni.

IMPORTANT - Veuillez lire attentive-

ment ces instructions avant d'installer ou

de faire fonctionner votre appareil

AVERTISSEMENT : Ne jamais laisser des

personnes (y compris les enfants) avec des

déciences physiques, sensorielles ou mentales, ou

sans expérience et/ou connaissances de l'appareil

l'utiliser sans supervision.

• Pour la ventilation, laissez un espace d’au moins 10 cm

autour du poste.

• Ne bouchez pas les bouches d'aération.

• N'installez pas le téléviseur sur une surface en pente

ou instable, car il risquerait de se renverser.

• Utilisez cet appareil sous des climats modérés.

• Le cordon d'alimentation doit être facilement

accessible. Ne posez pas le téléviseur ou le meuble,

etc., sur le cordon d'alimentation. Un cordon/prise

d'alimentation endommagé(e) peut causer un incendie

ou une électrocution. Tenez le cordon d'alimentation

par la che et évitez de débrancher le téléviseur en

tirant sur le cordon d'alimentation. Ne touchez jamais

le cordon/la prise d’alimentation avec des mains

humides, car cela pourrait causer un court-circuit

ou une électrocution. Ne jamais nouer le cordon

d'alimentation ou le laisser s'entrelacer avec d'autres

câbles. Lorsqu’il est endommagé, faites-le remplacer

par un personnel qualié.

• N'utilisez pas cet appareil dans les zones humides

ou moites. N'exposez pas le téléviseur aux liquides.

Si un liquide se verse sur la TV, débranchez la

immédiatement et faites la inspecter par un technicien

qualié avant de l'utiliser à nouveau.

• N'exposez pas la télé aux rayons solaires ou

à des ammes et ne la placez pas à proximité

des sources de chaleur intenses comme les

radiateurs électriques.

• Écouter du son à des volumes excessifs

à partir d'écouteurs et des casques peut

entraîner une perte auditive.

• Veillez à ce qu'aucune source de ammes

nues notamment une bougie allumée, ne soit placée

au-dessus du téléviseur.

• Pour éviter toutes blessures, ce téléviseur doit être

solidement xé à un mur, tout en suivant attentivement

les instructions (si cette option est disponible).

• Un nombre inme de pixels défectueux peut apparaître

occasionnellement sur l'écran comme des points xes

de couleur bleu, rouge, ou vert. Veuillez noter que

cela n'affecte en aucun cas les performances de votre

produit. Veillez à ne pas rayer l’écran avec les ongles

ou autres objets durs.

• Avant de nettoyer, débranchez le poste TV de la prise

murale. Utilisez uniquement un chiffon doux et sec

pour nettoyer l'appareil.

Avertissement

Blessures graves ou risque

de mort

Risque

d'électrocution

Risque de tension dangereuse

Avertissement

Risque de blessures ou de

dommages matériels

Important

Fonctionnement correct du

système

Remarque

Remarques supplémentaires

Symboles sur le Produit

Les symboles suivants sont utilisés sur le produit pour

marquer les instructions relatives aux restrictions, aux

précautions et à la sécurité. Chaque explication se

rapporte uniquement à l'endroit du produit portant le

symbole correspondant. Veuillez en tenir compte pour

des raisons de sécurité.

Équipement de classe II : Cet appareil, de par

sa conception, ne nécessite pas de branchement

sécurisé à un système électrique de mise à la terre.

Équipement de classe II avec mise à la terre

fonctionnelle : Cet appareil, de par sa conception,

ne nécessite pas de branchement sécurisé à un

système électrique de mise à la terre. Le système

de mise à la terre est utilisé pour des besoins fonctionnels.

Raccordement à une terre de protection : La

borne marquée est destinée au branchement du

conducteur de terre de protection associé au

câblage d'alimentation.

Borne dangereuse sous tension : Les bornes

marquées, dans des conditions normales

d'utilisation, sont dangereuses lorsqu'elles sont

sous tension.

Mise en garde, voir instructions d'utilisation :

Les zones marquées contiennent des piles en

forme de bouton ou de pièce de monnaie

remplaçables par l'utilisateur.

Produit Laser de Classe 1 :

Ce produit contient une source

laser de Classe 1 sans danger

dans des conditions d'utilisation

raisonnablement prévisibles.

i

CLASS 1

LASER PRODUCT

La pagina si sta caricando...

Panasonic TX40C200E Manuale del proprietario

Questo manuale è adatto anche per

Panasonic TX40C200E Manuale del proprietario

in altre lingue

Documenti correlati