AUKEY EP-T10 Manuale utente

Tipo
Manuale utente
User Manual
True Wireless Earbuds
https://manual-hub.com/
English
Italiano
Deutsch
Français
Español
01 ~ 15
56 ~ 68
16 ~ 29
30 ~ 42
43 ~ 55
Contents
https://manual-hub.com/
Thank you for purchasing the AUKEY EP-T10 True Wireless Earbuds. Please read this user
manual carefully and keep it for future reference. If you need any assistance, please
contact our support team with your product model number and Amazon order
number.
Package Contents
True Wireless Earbuds
Charging Case
Three Pairs of Ear-Tips (S/M/L)
Three Pairs of Ear-Wings (S/M/L)
USB-A to C Cable
User Manual
Warranty Card
- 01 -
https://manual-hub.com/
- 02 -
USB-C Charging Port
Microphone
LED Charging Indicator
Multi-Function Touch Button
LED Status Indicator
Product Diagram
https://manual-hub.com/
Specifications
Earbuds
Model
Technology
Driver (each channel)
Sensitivity
Frequency Range
Impedance
Microphone Type
Microphone Sensitivity
Charging Time
Battery Life
Battery Type
Operating Range
Weight
IP Rating (earbuds)
EP-T10
Bluetooth 5, A2DP, AVRCP, HFP, HSP, SBC, AAC
1 x 6mm / 0.24” speaker driver
88dB ±3dB SPL (at 1kHz/1mW)
20Hz – 20kHz
16 ohm ±10%
MEMS (microphone chip)
-42dB ±3dB
1.5 hours
Up to 7 hours
Li-Polymer (2 x 55mAh)
Up to 10m / 33’
9g / 0.32oz (pair)
IPX5
- 03 -
https://manual-hub.com/
- 04 -
Charging Case
Charging Input
Charging Time
Battery Type
Number of Earbuds Recharges
Weight
DC 5V
1.5 hours
Li-Polymer (400mAh)
3 times (pair)
61g / 2.15oz
Getting Started
Fully charge the charging case before first use. Connect the charging case to a USB
charger or charging port with the included USB-A to C cable. Or use a wireless charger
(5W) to charge the charging case. When the LED charging indicator turns solid white,
the charging case is fully charged. Charging takes around 1.5 hours. Charge and store
the earbuds in the charging case. After being fully charged, the case can fully charge
the earbuds 3 times. When charging the earbuds (with power disconnected), the
charging indicator will turn white for 30 seconds and then turn off; the LED status
indicators on the earbuds will light up white with a continuous breathing effect. When
the status indicators turn off, the earbuds are fully charged. The charging indicator will
flash white when the charging case has low power.
https://manual-hub.com/
- 05 -
https://manual-hub.com/
- 06 -
Turning On / Off
Turn On
Turn Off
Take out the left and right earbuds simultaneously from the charging case
Put the left and right earbuds back into the charging case
Pairing
Starting with the earbuds in the case:
Take out the left and right earbuds simultaneously. They will turn on automatically
and connect with each other within 10 seconds
After the left and right earbuds are connected successfully, you will hear a “pairing”
voice notification from the right earbud, and the LED status indicator on the right
earbud will flash white rapidly. This indicates the earbuds are ready to pair
Turn on the pairing function on the device you want to pair with the earbuds
In the list of available devices, find and select “AUKEY EP-T10”
If a code or PIN is required for pairing, enter “0000”
Once the earbuds are successfully paired with your device, each time you want to use
them simply switch on (with automatic connection) and switch off as follows.
1.
2.
3.
4.
5.
To power on, simultaneously take the earbuds out from the charging case and they
will turn on automatically
Regular Use After Pairing
https://manual-hub.com/
- 07 -
Using the Right Earbud Only
Starting with the earbuds in the case:
Take the right earbud out
You will hear a “pairing” voice notification, and the LED status indicator on the
earbud will flash white
Turn on the pairing function on the device you want to pair with the earbud
In the list of available devices, find and select “AUKEY EP-T10”
1.
2.
3.
4.
To power off, put the earbuds back into the charging case and it will start charging
the earbuds
The right earbud is the host earbud. The left earbud can't be used independently
When you turn on the earbuds, they will automatically reconnect to the last-paired
device or enter pairing mode if no paired device is found
To clear the pairing list, touch and hold the multi-function button on the right earbud
for 5 seconds when the earbuds are in the charging case. The LED status indicator will
flash 3 times
Notes
https://manual-hub.com/
- 08 -
If the left and right earbuds don't connect with each other, touch and hold the
multi-function buttons on both earbuds for 5 seconds. You will hear a tone when the
left and right earbuds are connected successfully
The earbuds will automatically shut down after 5 minutes in pairing mode if no
devices are paired
If the earbuds don't enter pairing mode, double-tap the multi-function button on the
right earbud
If one of the earbuds has no sound output, put both earbuds back into the charging
case and take them out again
The maximum wireless operating range is 10m (33ft). If you exceed this range, the
earbuds will disconnect from your paired device and you’ll hear a voice notification.
The connection will be re-established once you re-enter the wireless range within 5
minutes. The earbuds will automatically reconnect to the last-paired device. To
connect with other devices, repeat the previous “Pairing” steps
Once paired, you can wirelessly stream audio from your device to the earbuds. Music
will automatically pause when you receive an incoming phone call and resume once
the call is ended.
Controls & LED Indicators
Streaming Audio
https://manual-hub.com/
- 09 -
Play or pause
Increase volume
Decrease volume
Skip to next track
Skip to previous track
Tap the multi-function button on either earbud
Long-touch the multi-function button on the right earbud
Long-touch the multi-function button on the left earbud
Double-tap the multi-function button on the right earbud
Double-tap the multi-function button on the left earbud
Taking Calls
Answer or end a call
Tap either earbud multi-function button once. If there’s a
second incoming call, tap the multi-function button once
to answer the second call and end the first call. Alternatively,
touch and hold the multi-function button for 2 seconds to
answer the second call and put the first call on hold. Then
touch and hold the multi-function button for 2 seconds to
switch between these two calls
Reject an incoming call
Use Siri or other voice
assistants
Touch and hold either earbud multi-function button for 2
seconds
Triple-tap either earbud multi-function button
https://manual-hub.com/
-10 -
LED Status Indicator (Earbuds)
White flashing rapidly on the right earbud
White off
White flashing twice every 5 seconds
White breathing light
White off (after charging)
Status
Pairing mode / Incoming call
Connected / Playing music
Low battery
Charging
Fully charged
LED Charging Indicator (Charging case)
White on for 30 seconds
White flashing four times every second
White flashing twice every second
White on (after charging)
Status
Charging earbuds
Low battery
Charging
Fully charged
FAQ
The earbuds are on but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both
in pairing mode. Please follow the instructions in the “Pairing” section of this manual.
My device can’t find “AUKEY EP-T10” on the pairing list when trying to pair
Make sure the earbuds are on and in pairing mode (right earbud flashes white rapidly; see
the “Pairing” section of this manual). Otherwise, restart your device and the earbuds; then
try pairing again.
I’ve established a connection with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds. Some
smartphones require you to set up the earbuds as an audio output device before
audio can be transmitted. If you’re using a music player or other device, please make
sure it supports the A2DP profile.
The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone. Try getting closer to your smartphone to rule
out the possibility of interference or wireless range-related issues.
https://manual-hub.com/
- 11 -
I’ve established a connection with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds. Some
smartphones require you to set up the earbuds as an audio output device before
audio can be transmitted. If you’re using a music player or other device, please make
sure it supports the A2DP profile.
The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone. Try getting closer to your smartphone to rule
out the possibility of interference or wireless range-related issues.
Product Care & Use
Keep away from extreme heat and strong magnetic fields
Don’t use earbuds at high volume for extended periods, as this may cause permanent
hearing damage or loss
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below that
corresponds with your region. Please include your Amazon order number and product
model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
Amazon AU orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If
you have purchased from a different seller, please contact them directly for service or warranty issues.
Notice for the US
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
https://manual-hub.com/
- 12 -
1.
2.
This device may not cause harmful interference.
This device must accept any interference received, including interference that may
cause undesired operation.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
Amazon AU orders: [email protected]
*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If
you have purchased from a different seller, please contact them directly for service or warranty issues.
Notice for the US
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
https://manual-hub.com/
- 13 -
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
https://manual-hub.com/
- 14 -
1.
2.
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may
cause undesired operation.
1.
2.
l'appareil ne doit pas produire de brouillage, et
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
CE Statement
Max RF power level:
BT classic (2402–2480MHz): 2.1dBm
RF exposure assessment has been performed to prove that this unit will not generate
the harmful EM emission above the reference level as specified in EC Council
Recommendation (1999/519/EC).
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Excessive sound pressure from earphones and headphones can cause hearing loss.
https://manual-hub.com/
- 15 -
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Shenzhen AUKEY E Business Co., Ltd. declares that the radio equipment type (True
Wireless Headphones, EP-T10) is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet address:
www.aukey.com.
Notice: This device may be used in each member state of the EU.
Trademark
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Shenzhen AUKEY E Business Co., Ltd. is under
license. Other trademarks and trade names are those of their respective owners.
https://manual-hub.com/
Vielen Dank, dass Sie sich für die Echt kabellosen Ohrhörer EP-T10 von AUKEY entschieden
haben. Bitte lesen Sie diese Bedienungsanleitung aufmerksam durch und bewahren Sie
sie für zukünftige Referenz gut auf. Sollten Sie darüber hinaus Fragen oder Probleme
haben, hilft Ihnen unser freundlicher Kundenservice gerne weiter. Halten Sie Ihre
Produktmodell-Nummer und Amazon-Bestellnummer bereit.
Lieferumfang
Echt kabellose Ohrhörer
Lade-Case
3 Paar Ohrstücke (S/M/L)
3 Paar Ohrbügel (S/M/L)
USB-A- zu C-Kabel
Bedienungsanleitung
Garantiekarte
- 16 -
https://manual-hub.com/
USB-C-Ladeanschluss
Mikrofon
LED-Ladeanzeige
Multifunktions-Sensortaste
LED-Statusanzeige
Produktbild
- 17 -
https://manual-hub.com/
Technische Daten
Ohrhörer
Modell
Technologie
Treiber (jeder Kanal)
Empfindlichkeit
Frequenzbereich
Impedanz
Mikrofontyp
Mikrofonempfindlichkeit
Ladedauer
Akkulaufzeit
Batterietyp
IP-KlassifizierungOhrhörer
Reichweite
Gewicht
EP-T10
Bluetooth 5, A2DP, AVRCP, HFP, HSP, SBC, AAC
1 x 6 mm Lautsprechertreiber
88 dB ±3 dB SPL (bei 1 kHz/1 mW)
20 Hz – 20 kHz
16 Ohm ±10%
MEMS (Mikrofonchip)
-42 dB ±3 dB
1,5 Stunden
bis zu 7 Stunden
Lithium-Polymer (2 x 55 mAh)
IPX5
bis zu 10 m
9 g (beide Ohrhörer)
- 18 -
https://manual-hub.com/
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70

AUKEY EP-T10 Manuale utente

Tipo
Manuale utente