H600A HUMIDITY CONTROL
© 2021 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.
Tous droits réservés. La marque de commerce Honeywell Home est utilisée avec l’autorisation d’Honeywell International, Inc.
Ce produit est fabriqué par Resideo Technologies, Inc. et ses sociétés affiliées.
Alle Rechte vorbehalten. Die Marke Honeywell Home wird unter der Lizenz von Honeywell International Inc. verwendet.
Dieses Produkt wird von Resideo Technologies, Inc. und seinen Tochtergesellschaften hergestellt.
Tutti i diritti riservati. Il marchio Honeywell Home è usato in licenza da Honeywell International, Inc.
Questo prodotto è fabbricato da resideo Technologies, Inc. e dai suoi affiliati.
www.resideo.com
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
1-800-468-1502
60-0080—03 M.S. Rev. 10-21 | Printed in United States
Fig. 4. The H600A is suitable for surface as well as through-the-wall wiring.
WIRING
Disconnect power supply before making
wiring connections to prevent electrical
shock and equipment damage.
All wiring must comply with local electrical codes.
Follow equipment manufacturer’s instructions, if
available; otherwise proceed as follows:
Insert wiring through hole in back plate or through
conduit entry (see Figure 2). If conduit entry is not
used, hole must be closed with the rubber plug
provided. If the hole in the mounting plate is exposed
to an opening in the wall, plug the opening to prevent
drafts from affecting the humidistat operation.
Connect wires as shown in Figure 5.
Fig. 5. H600A Wiring Diagram.
Connect red and blue leadwires to humidifier, or red
and yellow leadwires to dehumidifier.
SETTING
Adjust the relative humidity setting with the
removable setting knob provided.
M38555
H600A
BLUE
RED
YELLOW
TO HUMIDIFIER
TO DEHUMIDIFIER