Legrand Architectural Dimming Panel - Auxiliary Guida d'installazione

Marca: Legrand

Modello: Architectural Dimming Panel - Auxiliary

Tipo: Guida d'installazione

WWW.LEGRAND.US/WATTSTOPPER - IS-00709-D Commercial Enclosure Solutions — MODEL: LCAP44/A & LCAP44/A + Main Lug page 1 of 8

Commercial Power Enclosure Solutions and Main Lug Options — LCAP MODEL: LCAP44A

LCAP WITH MAIN LUG MODELS: LCAP44ALO/MLO/MCB

The VA-RUU-1 switch comes pre-installed in KIT.

The VA-EPC-DFS-1 switch is installed on site.

NOTE: Please see install sheets for emergency

switch applications.

EMR. SWITCH

VA-EPC-DFS-12OV(277V)

Order Se

arate

EMR. SWITCH

VA-RRU-1-12OV (277V)

LCA

-OPT-SWITCH

8-Port (4 standard and 4 POE)

Overview

The Wattstopper® LCAP Series Commercial Enclosures ship with pre-configured

modular solutions. Load dimming and switching use the InFusion™ controllers

and switching products. The pre-configured designs save time in the Design

Center™ software and during the installation process.

The UL listed LCAP44A panels are adaptable to spaces that have mixed 0-10V,

and PWM loads and HV relay loads via the LVOS-0-10-PWM station. LCAP44A

connects to any controller over the local network for easy connection and

scalability.

Solution 1 – Parent-level Enclosure Models

Main Enclosure Description

LCAP44 44” Architectural Enclosure with hinged cover door

LCAP44A Panel

Configurations

(see KIT panel

part numbers

ordering key

last page)

Panel Upper Section:

 1 to 2 LVOS-0-10-PWM stations

Panel Middle Section:

 1 to 2 LVOS-0-10-PWM stations

Panel Lower Section:

 1 to 2 LVOS-0-10-PWM stations

Panel Low-Voltage Section

Optional Parts Description

LCAP-OPT-SWITCH 8-Port (4 standard and 4 POE) Ethernet switch/power supply

VA-RRU-1-120V Emergency Shunt Relay - 120

VA-RRU-1-277V Emergency Shunt Relay - 277

Additional Parts Ordered Separately Description

VA-EPC-DFS-120V Emergency lighting surface mount switch 120V

VA-EPC-DFS-277V Emergency lighting surface mount switch 277V

Specifications

LCAP44A Specifications

Cabinet Dimensions HWD 44.5” x 24” x 4.575” / 113cm x 61cm x 11.6cm

Door Dimensions HWD 44.5” x 24” x 0.75” / 113cm x 61cm x 2cm

Panel Insert HWD 42” x 21” x 4.175” / 106.7cm x 53.3cm x 10.6cm

Weight Enclosure 41 lbs / 18.6 kg

Weight Door 20.7 lbs / 9.39 kg

Weight Panel Insert 23 lbs / 10.43 kg

Number of LVOS-0-10-PWM* stations Up to 6

Analog, 0-10DC/LV — Max. Outputs Up to 24

PWM, LV — Max. Outputs Up to 24

HV Relay 120-277 VAC — Max. Outputs Up to 24

Line Feeds (breakers) required 1 and Up

Enclosure Finish Galvanized Steel

Door Finish Black - Powder Coated

Cover vented, hinged

HV Wire copper wire, min of 80°C/176°F insulation

Ventilation maintained 36” front clearance

Ambient Operating Temp. 0-40°C / 32-104°F

Ambient Operating Humidity 5-95% non-condensing

UL, CUL, and CE listed yes

* See these install sheets for important information:

Low Voltage Output Station Lighting_LVOS-0-10-PWM-1

LCAP Enclosure Designs

LCAP Series Enclosure Facts.

 Enclosures must be populated from left to right and top down.

o Blank positions cannot be left between lighting modules in Design

Center setup.

 Enclosures are pre-configured and wired (to the extent possible) using

specific combinations of the following components. Installed components are

dependent on the enclosure design.

o Components using high voltage wiring.

 Mixed high voltage wiring.

o Components using low voltage control signal wiring.

o Components using low voltage communication wiring.

o Components using high voltage and low voltage connections made

inside the enclosure.

 The enclosure uses built-in barriers to separate high and low voltage wiring.

o Some designs include the barrier while other designs require the

barrier be added by the designer.

o High voltage barriers may be installed between 120V/240V/277V load

modules.

 LCAP44A Enclosures only contain LVOS-0-10-PWM stations.

Enclosure Features / Parts

1. Enclosure can (includes door), order LCAP44 for can only.

2. Panel Insert (upper section).

a. Ground terminals, (notice terminals for all sections).

b. Wiring terminal blocks for upper section LVOS stations, (notice wiring

blocks for all sections if populated with LVOS stations).

i. Internal side pre-wired (see Wiring Block pg. 2).

ii. External side wired in field (see Wiring Block pg. 2).

c. Up to 2 LVOS-0-10-PWM stations (upper section)

3. Panel Insert (middle section).

a. Up to two additional LVOS-O-10-PWM stations.

4. Panel Insert (lower section).

a. Up to two additional LVOS-O-10-PWM stations.

5. Panel Insert (low-voltage section).

6. Enclosure cover with hinged/vented door allowing easy access when

servicing and proper ventilation for convection cooling process.

LCAP44A Panel Optional

Construction Parts See

Ordering Key,

last page.

Installation / Enclosure Mounting Instructions

Installation of LCAP products should be performed or supervised by a

Wattstopper factory representative. Installation and maintenance of high voltage

devices should only be performed by qualified and licensed personnel having

appropriate training and experience.

General Wiring

Drill proper size holes in can for running wires in and out of

the enclosure. Separate high and low voltage wire run

channels. All wire runs in and out of the enclosure should be

secured using 2-screw connectors or equivalent as shown at

the right . Proper conduit or equivalent wire channels

should be used according to local codes and regulations.

IMPORTANT SAFEGUARDS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

CAUTION: Turn Breakers OFF and check that no power is on at the AC

Terminal Boards when working in the enclosure or working on

lighting fixtures connected to the module’s loads, etc. Do not

allow trimmed wire cuttings to fall into enclosure components as

they may cause damage when power is restored. Damage from

this type of short will void the warranty.

 Do not use outdoors.

 Do not mount near gas or electric heaters.

Wattstoppe

WWW.LEGRAND.US/WATTSTOPPER - IS-00709-D Commercial Enclosure Solutions — MODEL: LCAP44/A & LCAP44/A + Main Lug page 2 of 8

PANEL

BAC

VIEW

MULTI-VIEW

LCAP44A–

LCAP44A -

Architectural Panel -

uxiliary

LVOS-0-10-PWM -

select quantity: select -

(Leave blank for 0) 1, 2, 3, 4, 5, or 6

KIT PART NUMBERS:

LCAP44A-KIT

included

LCAP44A

panel

optional

1 COM-POE-SWITCH Ethernet sw

LCAP44A-1-KIT

included

LCAP44A

panel,

LVOS-0

10-PWM-

-1

with 1 pre-wired bloc

optional

COM-POE-SWITCH

Ethernet sw,

VA-RRU-1-120

VA-RRU-1

277

LCAP44A-2-KIT

included

LCAP44A

panel,

LVOS-0

10-PWM-

-1

with 2 pre-wired block

optional

COM

POE

SWITCH

Ethernet sw, 1 or 2

RRU

120

RRU

277

LCAP44A-3-KIT

included

LCAP44A

panel,

LVOS-0

10-PWM-

-1

with

pre-wired bloc

optional

COM

POE

SWITCH

Ethernet sw, 1 to 3

RRU

120

RRU

277

LCAP44A-4-KIT

included

LCAP44A

panel,

LVOS-0

10-PWM-

-1

with 4 pre-wired block

optional

COM

POE

SWITCH

Ethernet sw, 1 to 4

RRU

120

RRU

277

LCAP44A-5-KIT

included

LCAP44A

panel,

LVOS-0

10-PWM-

-1

with

pre-wired bloc

optional

COM

POE

SWITCH

Ethernet sw, 1 to 5

RRU

120

RRU

277

LCAP44A-6-KIT

included

LCAP44A

panel,

LVOS-0

10-PWM-

-1

with 6 pre-wired block

optional

COM

POE

SWITCH

Ethernet sw, 1 to 6

RRU

120

RRU

277

 Do not mount enclosures in attics, garages, or crawlspaces, unless room is

properly conditioned to conform to ambient room temperature and humidity

requirements.

 Mount enclosure a minimum of 18” from ceiling or floor.

 National Electrical Code requires a minimum frontal clearance of 36” for the

enclosure.

 Use screws provided for mounting.

 If any emergency circuits are fed or controlled from this panel, it must be

located electrically where fed from a UPS, generator, or other guaranteed

source of power during emergency and power outage situations.

 LISTED AS EMERGENCY LIGHTING EQUIPMENT – using an appropriate

label.

 CAUTION: To avoid electrical

overload, total external connected

load should not exceed output rating.

SAVE THESE INSTRUCTIONS

Wire Block Terminal Close Up

Part Number Ordering Key

Design Center will generate part numbers automatically as the enclosures are

built. This key is for help creating manual orders if needed

LCAP44A Enclosure Multi-View

EMERGEN

Y CIRCUI

WWW.LEGRAND.US/WATTSTOPPER - IS-00709-F Commercial Enclosure Solutions — MODEL: LCAP44A & LCAP44ALO + Main Lug page 3 of 8

LCAP Panels with Main Lug Panel OPTION

LCAP44/A/LO/CB Panels with Main Lug Panel OPTION

Main Lug Circuit Breaker Option

The LCAPA and LCAPM series enclosures can be configured as a load feed

through panel (LCAP PANEL only) or as main lug panels with the addition of load

circuit breakers below the load control feed through compartment. Main lug

options can also contain a main breaker. The Main Lug option is available for the

LCAPALO and LCAPMLO/SLO series panels – see the LCAP32/44/M/S install

sheet. The circuit breaker options are based on the panel configuration, number

and type of loads,

and circuit breaker rating requirements. Once the main lug

panel and circuit breaker options are selected the panel is built and prewired* in

the factory and delivered to the project ready to be installed.

*NOTE: Panels with GFI breakers: GFI breakers are not installed or

pre-wired and are shipped separately.

Applications

The LCAP44A is designed for medium to large spaces requiring control of up to

24 low voltage PWM lighting circuits, 24 low voltage 010V DC lighting circuits,

and 24 120-277VAC relay lighting circuits. The built-in integration and networking

capabilities of the LCAP44A easily meet requirements in spaces needing multiple

types of lighting, and other automation integration systems using this panel.

Adding an Equinox 41 or 73 touchscreen to the project allows the facility

manager or end user to create, change, and manage scenes, schedules, and

user profiles.

Features

 Modular LCAP load section; pre-configured solution from the factory. Just

connect line voltage and load wires.

 Pre-configured Main Lug Panel solution options.

 System is expandable using other LCAP series primary or secondary panels

and LCAP Main Lug / Circuit Breaker options.

 Can be configured with emergency circuits for emergency lighting.

 Connects to InFusion Controller system via Ethernet or Station Bus.

 Up to 24 dry contact inputs; 12 of the contacts may be used for, system

powered, light sensors or occupancy sensors.

 Dimmers have programmable start/stop and dimming curve adjustment

features to customize dimming linearity.

 Simple programming from a single software solution - Design Center.

 Adding one BACnet enabled controller to a system allows the entire system

to be controlled through BACnet.

 Main Lug Panel options range from 18 to 36 circuits, 208-480V, and 10kAIC

to 65kAIC and may be configured with a main breaker option.

Setup In Design Center

Understanding LCAP and Main Lug panels:

 LCAP panels with the Main Lug option is a larger enclosure that holds the

traditional LCAP components in the upper section of the enclosure and

includes a breaker section in the lower section of the enclosure.

 LCAP panels with the Main Lug option are built in Design Center the same

way as standard LCAP panels. The only difference is the Main Lug option

has been selected. Follow the steps below to create an LCAP panel with the

Main Lug option selected.

1. In Design Center | Object Explorer select

 Vantage Objects,

 Enclosures, Commercial,

 LCAP model,

o LCAP44A-KIT (Main Lug),

2. Right click in the enclosure and select

Populate to automatically add LVOS-PWM

stations in the enclosure or select LVOS-

PWM stations and drag into the enclosure

as wanted. (It is not possible to drag an

LVOS-PWM station below a blank station

position in an LCAP enclosure – fill

enclosure from left to right / top to bottom.

Notice that breakers are automatically

added to the Main Lug

section of the

enclosure as LVOS-PWM stations are

added.

3. It is possible to add additional breakers in

the Main Lug section by right clicking

below existing breakers and selecting Add

Breaker until the maximum number of

breakers allowed is reached.

4. Select the Main Lug section of the

enclosure and change the type to MCB to

add a Main Breaker option or leave as

MLO for standard load breakers only.

LCAP44ALO/MLO/MCB Series Specifications

Specifications LCAP44ALO/MLO LCAP44ALO/MCB

Cabinet / Panel Cover Dimensions HWD

68.0” x 24.0” x 4.75”

172.72cm x 60.96cm x 12.06cm

77.0” x 24.0” x 4.75”

195.58cm x 60.96cm x 12.06cm

Breakers Up to 18 Up to 36

Main Lug Panel Door Dimensions HWD

16” x 12.5” x 0.75”

40.64cm x 31.75cm x 1.9cm

23” x 19” x 0.75”

58.42cm x 48.26cm x 1.9cm

Weight Enclosure with Cover 165 - 175 lbs / 74.84 – 79.38 kg 170 - 180 lbs / 77.11 – 81.65 kg

LCAP Panel Door Dimensions HWD 40.5” x 16.0” x 0.75” / 102.87cm x 40.64cm x 1.9cm

Panel Insert HWD 42” x 21” x 4.175” / 106.7cm x 53.3cm x 10.6cm

Weight Panel Insert M-23 lbs. 10.43 kg

Number of LVOS-0-10-PWM* stations Up to 6

Analog, 0-10DC/LV — Max. Outputs Up to 24

PWM, LV — Max. Outputs Up to 24

HV Relay 120-277 VAC — Max. Outputs Up to 24

Enclosure Finish Galvanized Steel

Door Finish Black - Powder Coated

Cover vented, hinged

Wire copper wire, MIN. of 80°C / 176°F insulation

Ventilation maintained 36” front clearance

Ambient Operating Temp. 0-40°C / 32-104°F

Ambient Oper. Humidity 5-95% non-condensing

UL, CUL, and CE listed yes

WWW.LEGRAND.US/WATTSTOPPER - IS-00709-F Commercial Enclosure Solutions — MODEL: LCAP44A & LCAP44ALO + Main Lug page 4 of 8

4 4 .75 ” ( 113 .6 6 5 c m ) 23.25” (59.055cm)

4 .5 ” ( 11.4 3 c m )24.0” (60.96cm)

68”

17 2 .7 2 c m

BUS DIAGRAMS

10 0 A M A I N L U GS

LCAP44-18PANEL

MAIN LUGS

WITH DOORS &

DEADFRONT REM

VED

LCAP44-18 PANEL

SURFACE TRIM

BOX 4 1/2” DEEP

WITH DOORS INS

ALLED

BARRIER

COMMUNICATION

CONDUIT

GROUND

BAR

CIRCUIT

BREAKERS

NEUTRAL

BAR

12 0 V/ 24 0 V 10 3 W

(10KAIC-22KAIC-65KAIC)

NEUTRAL

910

11 12

13 14

15 16

17 18

208Y/120V 30 4W

(10KAIC-22KAIC-65KAIC)

480Y/277V 30 4W

(14KAIC)

910

11 12

13 14

15 16

17 18

NEUTRAL

DIMMER

SECTION

LCAP44ALO/MLO

1. Enclosure upper section for

LCAP44ALO Panel.

2. Enclosure lower section for up to 18

breakers. Select the Main Lug option

MLO option for (up to) 18, 20A

breakers.

3. Breaker section may be configured

for 4-wire or 3-wire power

configurations.

(See last page for breaker/order options)

LCAP44A

1. Start with the standard LCAP44A Panel.

2. Select the Main Lug option MLO or MCB.

Both LCAP44A MLO and MCB options come

with (up to) 18 or 36, 20A breaker

configurations.

The MCB option also comes with a 100A

main breaker for 18 breaker model or 225A

main breaker for 36 breaker model.

3. Finished LCAP44ALO/MLO enclosure – 68” H.

4. Finished LCAP44ALO/MCB enclosure – 77” H.

See additional specifications below

STANDARD LCAPA SERIES ENCLOSURES MAY BE CONFIGURED WITH MAIN LUG ENCLOSURES

Example LCAP44A configured with LCAP44ALO/MLO or MCB:

LCAP44ALO/MLO with Main Lug (up to 18 Breakers) Enclosure Multi-View

12 3 4

ADD THE MAIN

LUG MLO OPTION

CB OPTION

ADDS MAIN

BREAKER

OR ADD THE MAIN LUG

MCB OPTION

O CRE

TE AN

LCAP44ALO/ MLO

ANDARD

LCAP44A PANEL

OR CRE

TE AN

LCAP44ALO/ MCB

MLO

OPTION

MCB

OPTION

WWW.LEGRAND.US/WATTSTOPPER - IS-00709-F Commercial Enclosure Solutions — MODEL: LCAP44A & LCAP44ALO + Main Lug page 5 of 8

LCAP44-36PANEL

SURFACE MOUNT BOX

4-1/2” DEEP

WITH DOORS INSTALLED

77”

195.58cm

44.75” (113.665cm) 32.25” (81.915cm)

4.5” (11.43cm)24.0” (60.96cm)

LCAP44-36 PANEL

MAIN LUGS

WITH DOORS &

DEADFRONT REMOVED

BARRIER

COMMUNICATION

CONDUIT

GROUND

BAR

CIRCUIT

BREAKERS

NEUTRAL

BAR

DIMMER

SECTION

BREAKER

SECTION

BUS DIAGRAMS

225A MAINLUGS

910

11 12

13 14

15 16

17 18

3231

NEUTRAL

208Y/ 120V 30 4W

(10KAIC-22KAIC-65KAIC)

480Y/277V 30 4W

(14KAIC)

910

11 12

13 14

15 16

17 1 8

3231

NEUTRAL

12 0 V/ 2 4 0 V 10 3 W

(10KAIC-22KAIC-65KAIC)

LCAP44ALO/MLO (36 Breakers)

1. Enclosure upper section for LCAP44ALO Panel.

2. Enclosure lower section for up to 36 breakers. Select

the Main Lug option MLO option for (up to) 36, 20A

breakers.

3. Breaker section may be configured for 4-wire or 3-wire

power configurations.

(See last page for breaker/order

options)

LCAP44-18 PANEL

SURFACE MOUNT

BOX 4-1/2” DEEP WITH

DOORS INSTALLED

77”

195.58cm

4 4 .7 5 ” ( 113 .6 6 5 c m ) 32.25” (81.915cm)

4 .5 ” ( 11.4 3 c m )24.0” (60.96cm)

LCAP44-18 PANEL

MAIN BREAKER

WITH DOORS &

DEADFRONT REMOVED

BARRIER

COMMUNICATION

CONDUIT

GROUND

BAR

CIRCUIT

BREAKERS

NEUTRAL

BAR

BUS DIAGRAMS

100A MAIN BREAKER

10 0 A

MAIN

910

11 12

13 14

15 16

17 18

NEUTRAL

BKR.

10 0 A

MAIN

910

11 12

13 14

15 16

17 18

NEUTRAL

BKR.

208Y/120V 30 4W

(10KAIC-22KAIC-65KAIC)

480Y/277V 30 4W

(14KAIC-*35KAIC-*65KAIC)

*SERIES RATED

12 0 V/ 24 0 V 10 3 W

(10KAIC-22KAIC-65KAIC)

DIMMER

SECTION

LCAP44ALO/MCB

1. Enclosure upper section for

LCAP44ALO Panel.

2. Enclosure lower section for up to 18

breakers. Select the Main Lug type

and change to MCB to add a Main

Breaker option.

3. Breaker section may be configured

for 4-wire or 3-wire power

configurations.

(See last page for breaker/order options)

LCAP44ALO/MCB with Main Lug & Main Breaker Enclosure Multi-View

LCAP44ALO/MLO with Main Lug (up to 36 breakers) Enclosure Multi-View

WWW.LEGRAND.US/WATTSTOPPER - IS-00709-F Commercial Enclosure Solutions — MODEL: LCAP44A & LCAP44ALO + Main Lug page 6 of 8

LCAP44-36 PANEL

SURFACE MOUNT BOX

4-1/2” DEEP

WITH DOORS INSTALLED

77”

195.58cm

44.75” (113.665cm) 32.25” (81.915cm)

4.5” (11.43cm)24.0” (60.96cm)

LCAP44-36PANEL

MAIN BREAKER

WITH DOORS &

DEADFRONT REMOVED

BARRIER

COMMUNICATION

CONDUIT

GROUND

BAR

CIRCUIT

BREAKERS

NEUTRAL

BAR

BUS DIAGRAMS

100A - 225A

MAIN BREAKER

910

11 12

13 14

15 16

17 18

3231

NEUTRAL

225A

10 0 A

MAIN

BKR.

208Y/120V 30 4W

(10KAIC-22KAIC-65KAIC)

480Y/277V 30 4W

(14KAIC-*35KAIC-*65KAIC)

*SERIES RATED

910

11 12

13 14

15 16

17 18

3231

NEUTRAL

225A

10 0 A

MAIN

BKR.

12 0 V/ 24 0 V 10 3 W

(10KAIC-22KAIC-65KAIC)

DIMMER

SECTION

BREAKER

SECTION

LCAP44ALO/MCB (36 breaker)

1. Enclosure upper section for LCAP44ALO Panel.

2. Enclosure lower section for up to 36 breakers. Select the

Main Lug type and change to MCB to add a Main Breaker

option.

3. Breaker section may be configured for 4-wire or 3-wire power

configurations.

(See last page for breaker/order

options)

LCAP44ALO/MCB with Main Lug (up to 36 breakers) & Main Breaker Enclosure Multi-View

LCAP with Optional Main Lug Part Number Ordering Key

Design Center will generate LCAP44ALO/MLO/MCB part numbers automatically as the enclosures are built. This key is for help in understanding and creating orders in the

LCAP Quote Tool online ordering tool.

Breaker Types for LCAPALO/MLO/MCB Enclosure Configurations

CONFIGURATION FOR LCAP32

DDER - Branch Breakers Each, 1-Pole, 20

SIZE HEIGHT

BASE PANEL CONFIGURATION 10kAIC 14kAIC 22kAIC

35kAIC

65kAIC

circuits

100A

Bussing

56"

240V - MLO (Single Phase) BAB QHB

GHB

208V - MLO BAB QHB

GHB

480V - MLO GHB

65"

240V - MCB (Single Phase)(up to 100A, 65kAIC)

BAB*

208V - MCB (up to 100A, 65kAIC)

BAB*

480V - MCB (up to 100A, 35kAIC) GHB*

480V - MCB (up to 100A, 65kAIC)

GHB*

CONFIGURATION FOR LCAP44

DDER - Branch Breakers Each, 1-Pole, 20

SIZE HEIGHT

BASE PANEL CONFIGURATION 10kAIC 14kAIC 22kAIC

35kAIC

65kAIC

circuits

100A

Bussing

68"

240V - MLO (Single Phase) BAB QBH

GHB

208V - MLO BAB QBH

GHB

480V - MLO GHB

77"

240V - MCB (Single Phase)(up to 100A, 65kAIC)

BAB*

208V - MCB (up to 100A, 65kAIC)

BAB*

480V - MCB (up to 100A, 35kAIC) GHB*

480V - MCB (up to 100A, 65kAIC)

GHB*

Breaker Types for LCAPALO/MLO/MCB Enclosure Configurations (cont.)

CONFIGURATION FOR LCAP44 -

36 Breaker

DDER -

Branch Breakers Each, 1-Pole, 20

SIZE

HEIGHT

SIZE

HEIGHT

SIZE

HEIGHT

SIZE

HEIGHT

circuits

225A

Bussing

77"

240V -

MLO (Single Phase)

BAB

QBH

GHB

208V -

MLO

BAB

QBH

GHB

480V -

MLO

GHB

240V -

MCB (Single Phase)(up to 225A, 65kAIC)

BAB*

208V -

MCB (up to 225A, 65kAIC)

BAB*

480V -

MCB (up to 100A, 35kAIC)

GHB*

480V -

MCB (110A -

225A, 35kAIC)

GHB*

480V -

MCB (up to 100A, 65kAIC)

GHB*

480V -

MCB (100A -

225A, 65kAIC)

GHB*

* Breaker series rating when a main breaker option is selected

BREAKER RATING LEGEND (Single Phase)

MLO = Main Lug Option

Type BAB

10kAIC

MCB = Main Lug with Main Circuit Breake

Type QBH

22kAIC

Type GHB

65kAIC

LCAP Panel with Main Lug - Ordering Key

WWW.LEGRAND.US/WATTSTOPPER - IS-00709-F Commercial Enclosure Solutions — MODEL: LCAP44A & LCAP44ALO + Main Lug page 7 of 8

WWW.LEGRAND.US/WATTSTOPPER - IS-00709-F Commercial Enclosure Solutions — MODEL: LCAP44A & LCAP44ALO + Main Lug page 8 of 8

Legrand Architectural Dimming Panel - Auxiliary Guida d'installazione

Marca: Legrand

Modello: Architectural Dimming Panel - Auxiliary

Tipo: Guida d'installazione

Scarica il pdf

rapporto

in altre lingue

English: Legrand Architectural Dimming Panel - Auxiliary Installation guide

Legrand Architectural Dimming Panel - Auxiliary Guida d'installazione

Legrand Architectural Dimming Panel - Auxiliary Guida d'installazione

in altre lingue

Altri documenti