1 2 3 4 5
6
Reduced temperature for delicate fabrics ', for a longer drying time; e.g.
acrylic, polyamide, elastane or acetate silk.
ˎ &cø
(Low Heat)
Reduces creasing and prolongs the anti-creasing phase after the
programme has finished; can be selected in one of two levels.
ˎ
(Easy-Iron)
Indicators which show the programme sequences.
Drying, Iron Dry, Cupboard Dry, End / Easy Iron.
Status indicators
Icc+cc\
Clean the fluff filter and/or air cooler
a
page 6.
Empty the condensation container.
Fill the water tank with distilled water
a
page 9.
Service indicators
4 clean
. container
u water tank
ˎ Menu
For selecting the settings.
ˎ -/+ (Change)
For changing all the settings in the display panel.
Electronic start
timer
End of the programme after ... (depending on the programme selected, e.g. 1:54h
a
2h;
you can always select up to the next full hour).
1 -24 hrs
3 Signal
There are four buzzer volume settings: 0 (off), 1 (quiet), 2 (normal), 3 (loud),4 (very loud).
0, 1, 2, 3, 4
# Appliance lock
Provides protection against unintentional changes to the functions set
(press and hold the Menu button for 5 seconds).
On-Off
9 Fine adjustment
Drying result
The drying result (e.g. cupboard dry) can be increased in three stages (1 - 3) for the
programmes LF Cottons, cEasy-Care, 1øMix and ASuper Quick 40 a presetting = 0.
After one of these programmes has been finely adjusted, the setting is retained for the others.
0, 1, 2, 3
Spin speed
The spin speed that was used in the washing machine;
for more precise indication of the projected drying duration only.
600-1800 ²
... and adapt to individual requirements
Never operate the dryer if it is damaged.
Inform your after-sales service.
Inspecting
the dryer
Sorting and loading laundry
Remove all objects from pockets.
Pay particular attention to cigarette lighters.
The drum must be empty before filling.
If necessary, fill the water tank for
Steam Dry / Steam Refresh programmes
a
page 8.
See programme overview on page 7.
See also separate instructions for basket for woollens (depending on
the model)
Your new dryer
Congratulations! - You have chosen a modern, high-quality domestic
appliance from Bosch.
A distinctive feature of the condensation dryer is its low energy
consumption.
Every dryer which leaves our factory is carefully checked to ensure
that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased
to help.
Environmentally-responsible disposal
Dispose of packaging in an environmentally-responsible manner.
This appliance is designated according to European directive
2002/96/EC which governs waste electrical and electronic
equipment (WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
For further information about our products, accessories, spare parts
and services, please visit: www.bosch-home.com
Intended use
Contents Page
ʋ Preparation . . . . . . . . . . . . . . . . . . . . . . 2
ʋ Setting the programmes . . . . . . . . . . . . . 2
ʋ Drying . . . . . . . . . . . . . . . . . . . . . . . . 3/4
ʋ Notes on laundry . . . . . . . . . . . . . . . . . . 5
ʋ Cleaning and care . . . . . . . . . . . . . . . . . . 6
ʋ Overview of programmes . . . . . . . . . . . . 7
ʋ Short spin / Refresh . . . . . . . . . . . . . . 8/9
ʋ Installation . . . . . . . . . . . . . . . . . . . . . . 10
ʋ Frost protection / Transport . . . . . . . . . . 10
ʋ Technical data . . . . . . . . . . . . . . . . . . . 11
ʋ Optional accessories . . . . . . . . . . . . . . . 11
ʋ What to do if... / After-sales service . . . . 12
ʋ Safety instructions . . . . . . . . . . . . . . . . 13
Preparing for installation, see page 8
Selecting and adjusting the programme
Additional functions
Select the drying programme ...
Press the
(Start/Stop) button
Only if your hands are dry.
Only hold the plug by the plug
casing.
Connecting the
mains plug
Display panel
Programme selector
All buttons are sensitive,
a light touch is enough!
Display for max. load
capacity for selected programme
ʋ only for domestic use.
ʋ only to be used for drying, refreshing or unwrinkling
fabrics that have been washed with water.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
3
2
1
Drying / Short spin /
Refresh
Drying
Emptying condensation
Empty the container after each drying cycle, not during drying!
1. Remove the container, holding it level.
2. Pour out condensation.
3. Push the . container back in until it clicks into place.
Cleaning the fluff filter
1. Open the door, remove the filter and fold open.
2. Remove the fluff (by wiping the filter with your hand).
3. Close the filter, insert it again and close the door.
4. Remove fluff from the door and the area around it.
Very dirty or blocked filters should be rinsed under warm
water, and then dried thoroughly.
Clean the filter in the water tank if it is dirty
1. Remove the condensation tank.
2. Remove the filter.
3. Clean the filter under running water.
4. Re-insert the filter and push in the condensation tank until it clicks into
place.
Switching off the dryer
Turn the programme selector to O (Off).
Do not leave damp laundry in the dryer.
Removing the laundry
The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for
an hour (or two hours if you manually select the c(Easy-Iron) function, depending on the model.)
Information on laundry ...
Labelling of fabrics
Follow the manufacturer's care information.
( Drying at normal temperature.
'cDry at a low temperature
a
select &cøø(Low Heat) as well.
)cDo not machine dry.
Do not tumble-dry the following fabrics:
Airtight fabrics (e.g. rubber-coated fabrics).
Delicate materials (silk, curtains made from synthetic material)
a
they may crease.
Oil-stained laundry.
Drying tips
To ensure a consistent result, sort the laundry by fabric type and drying programme.
Close zips, hooks and eyes, and do up any buttons.
Tie belts, apron strings etc. together.
Do not overdry easy-care laundry
a
risk of creasing
Allow laundry to finish drying in the air.
Do not iron laundry immediately after drying, fold items up and leave for a while
a
the remaining moisture will then be distributed evenly.
Knitted fabrics (e.g. T-shirts, jerseys) often shrink slightly the first time they are tumble-dried.
a
Do not select the Cupboard Dry Plus programme.
Starched laundry is not always suitable for dryers
a
starch leaves behind a coating that
adversely affects the drying operation.
When washing laundry that is to be tumble-dried afterwards, dose the fabric softener
according to the manufacturer's instructions.
With a small load, use the Timed Program.
Tips for Short spin/refreshing
Use your dryer for unwrinkling and refreshing fabrics.
Short spin cycle for reducing creasing.
Refresh cycle for eliminating odours from fabrics.
Do not use Short spin/Refresh for the following fabrics:
Wool, leather, fabrics with metal, wooden or plastic parts.
Wax and oil jackets.
Sort the laundry by colour and put on separate short spin/refresh cycles to prevent the
colours from bleeding.
These programmes do not remove stains
a
stains must be treated and removed
beforehand.
For best results, so that the laundry will have as few creases as possible, remove each item
immediately after the programme has finished and hang on a hanger to finish drying. Pull
clothes into shape if required.
Environmental protection/energy-saving tips
Before drying, spin the laundry thoroughly in the washing machine
a
the higher the spin
speed, the shorter the drying time will be (consumes less energy), also spin easy-care
laundry.
Use the maximum recommended capacity, but do not exceed it
a
Page 7, Programme overview.
Make sure the room is well ventilated during drying.
Clean the fluff filter after each drying cycle
a
page 4.
Keep the air cooler clean
a
page 6 Cleaning and care.
Keep the supply of cool air unobstructed
a
Do not cover or block the cooling grill.
Condensation container
Control panel
Air inlet
Fluff filter
Drum
Cleaning and care
Dryer housing, control panel, air cooler, moisture sensors
Wipe with a soft, damp cloth.
Do not use harsh cleaning agents and solvents.
Remove detergent and cleaning agent residue immediately.
During drying, water may collect between the door and seal. This does not affect your
dryer's functions in any way.
Clean the protective filter 3 - 4 times a year
or if
4 flashes after the fluff filter has been cleaned.
Air cooler / protective filter
When cleaning, only remove the protective filter. Clean the air cooler
behind the protective filter once a year.
Allow the dryer to cool.
Residual water may leak out, so place an absorbent towel
underneath the maintenance door.
1. Unlock the maintenance door.
2. Open the maintenance door fully.
3. Turn both locking levers towards each another.
4. Pull out the protective filter/air cooler.
Do not damage the protective filter or air cooler.
Clean with warm water only. Do not use any hard or sharp-edged
objects.
5. Clean the air cooler thoroughly.
Allow to drip dry.
6.
Clean the seals.
7. Re-insert the protective filter/air cooler,
with the handle facing down.
8. Turn back both locking levers.
9. Close the maintenance door until the lock clicks into place.
Moisture sensors
The dryer is fitted with stainless steel moisture sensors. The sensors
measure the level of moisture in the laundry. After a long period of
operation, a fine layer of limescale may form on the sensors.
1. Open the door and clean the moisture sensors with a damp sponge
which has a rough surface.
Do not use steel wool or abrasive materials.
Cover for steam nozzle in the drum
After lengthy operation, limescale and fluff may accumulate on
the cover of the steam nozzle. Clean regularly:
1. Open the door and remove the cover with a screw driver.
Clean the cover under running water.
2. Push and click the protective cap back in place.
Cover for
steam nozzle
Air cooler
Programme end once \ lights up in the display.
Interrupt programme removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The selected programme must then be continued until it is finished.
Hot steam may escape during the Steam Drying / Steam Refresh programmes.
1. Open the door. The drying cycle is paused.
2. Remove or add laundry and close the door.
3. If required, select a new programme and additional functions.
4. Press the (Start/Stop) button.
Water tank
filling hole
with filter
Only when switched off!
Read these instructions before operating the dryer.
Observe the safety instructions on page 13.
Caution - risk of scalding.
7
Programme overview see also pages 5 and 8
After drying ...
T-shirt
Shirts
Trousers
Skirts/dresses
Sportswear
Work clothing
Anoraks
Terry
Bathrobes
Underwear
Socks
Bed linen
Table linen
Terry towels
Tea towels/
hand towels
c
iron
lightly iron
@c
do not iron
c
mangle
LF Cottons
max. 8 kg
For whites and coloureds made of cotton or linen.
Iron Dry ø@
è* è* è* è* è* è* è* è*
Cupboard Dry +. @ è* è* è* * è* è*
Cupboard Dry Plus +: @
è* è* è* è* * è* è*
IEasy-Care
max. 3.5 kg For non-iron laundry made of synthetic fibres and mixed fabric, cotton.
Iron Dry øc @
è* è* è* è* è* è*
Cupboard Dry +. @ è* è*
Cupboard Dry Plus +: @ è* è* è*
w Steam Dry
For smoothing hard-wearing and easy-care fabrics. Steam smooths the fabrics.
Cottons Non iron @
max. 2.5 kg
Further information
a
Page 8.
Synthetics Non Iron @
max. 1.5 kg
H Steam Refresh
For freshening hard-wearing and easy-care fabrics. Steam freshens up the fabrics.
G Business
max. 1.5 kg
Further information
a
Page 8.
L Casual
max. 1.0 kg
LMix
Cupboard Dry +.
max. 3 kg
For washing machine-safe woollens. Fabrics become softer, but are not dried. Remove the laundry after the programme has finished and
hang it up.
Z Sportswear
max. 1.5 kg
For fabrics with membrane coating, waterproof fabrics, functional clothing, fleece (jackets/trousers with removable inner lining are to be
dried separately).
O Wool in basket
max. 1,5 kg
Use with the separate basket only. See the basket for woollens description.
A Super Quick 40
max. 2 kg
For laundry that needs to be dried quickly, e.g. items made of synthetic fibres, cotton or mixed fabrics. The values may differ from those
given depending on the type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and size of the load.
Time program warm
max. 3 kg
For pre-dried, multi-layered delicate fabrics made of acrylic, or small, individual items of laundry. Also for subsequent drying.
0311 / 9000631759
*631759*
Robert Bosch Hausgeräte
GmbH
Carl-Wery-Str. 34
D-81739 Munich/Germany
WTS865B4SN
8
Steam Drying - Steam Refresh
Steam programmes for unwrinkling or refreshing
Your dryer has unwrinkling and refreshing programmes that can be used for removing
odours and minimising creasing in dry fabrics. Steam smooths and freshens up items of
clothing.
Sorting the laundry according to size, weight, fabric and colour is necessary.
Only use Short spin/Refresh for fabrics with the same properties.
During steam generation (required), additional noises may occur.
The result of refreshing and unwrinkling may vary depending on the type of fabric, size of
the load and programme selected.
After unwrinkling or refreshing, all fabrics must be removed immediately and hung crease-
free on a hanger or a washing line for 15 minutes.
Programmes
Please observe the treatment symbols and manufacturer's instructions on the fabrics.
Do not use Short spin/Refresh for fabrics made of wool, leather, containing metal or
wooden parts as well as wax and oil jackets!
Do not use any dryer cleaning sets!
ʑ
w Steam Dry
@ Synthetics Non iron
Suitable for easy-care fabrics, e.g. formal shirts. Fabrics are smoothed. You can expect
optimum results if non-iron appears on the care label. After the programme has finished,
the items must be removed immediately and hung crease-free on a hanger or washing line
for 15 minutes. The programme is for up to 5 formal shirts.
@ Cottons Non Iron
Suitable for hard-wearing cotton fabrics, e.g. bed linen, tablecloths or formal shirts. Fabrics
are smoothed. You can expect optimum results if non-iron appears on the care label. After
the programme has finished, the items must be removed immediately and hung crease-free
on a hanger or washing line for 15 minutes. The programme is for up to 5 formal shirts or
1 to 2 larger items.
ʑ
H Steam Refresh
G Business
Suitable for refreshing suits, jackets and trousers, or dry-clean items that cannot be washed
in the washing machine a see the care label. The programme only refreshes fabrics and
does not clean them. After the end of the programme, the items must be removed
immediately. Programme for 1 suit or 1 to 2 smaller items.
L Casual
Suitable for refreshing casual wear made of cotton or artificial fibres. Fabrics must be
suitable for dryers a see the care label. The programme refreshes fabrics only, and does
not clean them. After the programme has finished, the fabrics must be removed
immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.
9
Steam Drying - Steam Refresh
Your water tank empties automatically after the programme has finished.
Cleaning is therefore not required
Filling the water tank:
Fill the dryer's water tank with distilled water before every Steam Dry - Steam Refresh cycle.
1.
Move the programme selector to Steam Dry
or Steam Refresh.
The u symbol appears in the display.
2. Remove the condensation tank completely.
Before every Steam Dry - Steam Refresh cycle, fill the water tank with
distilled water only. Do not use tap water, condensation or additives.
3. Fill the water tank. Use the jug supplied.
If the water tank filter is dirty a clean the filter in the water tank.
See page 4.
4. Pour the distilled water into the filling hole on the water tank,
until the
u symbol goes out on the display panel.
If drying the recommended load, approximately 250 to 300 ml of distilled
water is used in the Steam Dry - Steam Refresh programmes.
5. Insert the condensation container all the way.
6. Start the Steam Dry or Steam Refresh programme.
10
Installation
Scope of delivery: dryer, installation and instruction manual, jug, basket for woollens
(depending on the model).
Check dryer for transport damage.
The dryer is heavy. Do not attempt to lift it on your own.
Be careful to avoid sharp edges.
Do not install in a room where there is a risk of freezing. Freezing water may cause damage.
If in doubt, have the appliance connected by a specialist.
Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.
Setting up the dryer
The appliance plug must always be accessible.
Ensure that the appliance is installed on a clean, level
and firm surface.
Keep the cooling grille on the front of the dryer
clear.
Keep the area around the dryer clean.
Level the dryer using the threaded feet.
Use a spirit level.
Do not remove the threaded feet under any
circumstances.
Mains connection see safety information a page 13.
Connect to an AC earthed socket. If in doubt, have the socket checked by a specialist.
The mains voltage and the voltage shown on the rating plate (a Page 11) must be the same.
The connected load and necessary fuse protection are specified on the rating plate.
Frost protection / Transport
Preparation
1. Empty the condensation container a page 4.
2. Select any programme using the programme selector.
3. Press the (Start/Stop) button a condensation is pumped into the container.
4. Wait 5 min., and then empty the condensation container again.
5. Turn the programme selector to O (Off).
The water tank must not contain any distilled water. If necessary, run the Steam/Refresh programme.
1.
Remove all accessories
from the drum.
The drum must be empty.
Make sure that the air inlet
remains unobstructed
Clean and level
Do not install the dryer behind a door or sliding
door, which could prevent or restrict opening of the
dryer door. This will prevent children from locking
themselves in and putting their lives in danger.
2.
Do not operate the dryer if there
is a danger of frost.
11
Technical data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (adjustable height)
Weight approximately 43.5 kg
Max. capacity 8 kg
Condensation container 4.0 l
Water tank approx. 0.4 l
Connection voltage 220-240 V
Connected load max. 2,800 W
Fuse protection 10 A
Ambient temperature 5 - 35 °C
Product number
Production number
Inside of door
The rating plate can be found on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions. The value on the label is achieved at the
maximum heat setting.
Spin speed in rpm
(residual moisture)
Drying time
in min.**
Energy
consumption
in kWh**
LF Cottons 8 kg 10 A 10 A
+. Cupboard Dry 1400 (approx. 50 %) 131 3.74
1000 (approx. 60 %) 148 4.49
800 (approx. 70 %) 165 5.17
Iron Dry 1400 (approx. 50 %) 109 2.24
1000 (approx. 60 %) 126 3.44
800 (approx. 70 %) 143 3.86
cEasy-Care 3.5 kg 1000 45 1.05
+. Cupboard Dry 800 (approx. 40 %) 48 1.35
600 (approx. 50 %) 60 1.65
*Test programme to DIN EN 61121
**The values may differ from those given, depending on overvoltage and undervoltage, the
type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and
the size of the load.
ʠ
Drum interior light (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and after the programme has
started. The light goes out automatically. To change the bulb a page 12.
Optional accessories (order from the after-sales service using the order number)
Connecting kit for condensation outlet
The condensation is drained off immediately via a hose.
Washer-dryer stack connection set
The dryer can be stacked on top of a suitable washing machine of the same depth and width,
to save space. The dryer must be secured to the washing machine with this connection set.
Installation underneath the worktop
Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.
WTZ
1110
WTZ
11320
WTZ
10290
12
What to do if...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to O (Off) and remove the appliance plug from the socket.
ʠ
The (Start/Stop) indicator
light does not come on.
Mains plug plugged in?
Programme selected?
ʠ
The ā symbol and (Start/
Stop) indicator light are flashing.
Empty the condensation container a page 4.
Check the condensation outlet hose, if applicable (kink).
ʠ
The 4 symbol and (Start/
Stop) indicator light are flashing.
Clean the air cooler a page 6 Cleaning and care.
Clean the fluff filter a page 4.
ʠ
The u symbol flashes. Is the water tank empty?
Filling with distilled water a Page 9.
The filter in the water tank may have become dirty.
If so, clean the filter in the water tank a Page 4.
ʠ
The Steam Dry - Steam Refresh
does not start.
ʠ
Dryer does not start. Has the (Start/Stop) button been pressed? Is the door
closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out. Make sure the dryer is level.
Clean the air cooler seal.
ʠ
The door opens by itself. Push the door closed until you hear it click into place.
ʠ
Items crease even though the
Steam Dry - Steam Refresh
programme has been selected.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
ʠ
Drying result was not achieved
(laundry too damp).
Hot laundry feels damper than it actually is.
The selected programme does not suit the load. Use
another drying programme or, in addition, select the time
programme a page7.
Use fine adjustment for the drying result a page1/2.
Fine layer of limescale on the humidity sensors a Clean
the humidity sensors apage 9.
Programme cancellation, e.g. tank full, mains power supply
failure, door open or maximum drying time reached.
ʠ
Drying time too long. Clean the fluff filter under running
water a page 4.
Insufficient supply of air a ensure that air can circulate.
Air inlet possibly blocked a Clear inlet a page 8.
Ambient temperature higher than 35 °C a Ventilate the
room.
ʠ
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
ʠ
One or more programme status
indicator lamps are flashing.
Clean the filter and air cooler a page 4/6.
Check the installation conditions a page 10.
Switch off, allow to cool, switch on again and restart the
programme.
ʠ
The interior light (depending on
the model) does not work.
Unplug the appliance plug, fold back the cover cap on the
inside above the door (using a Torx 20 screwdriver) and
replace the bulb. Close the cover cap.
13
Safety instructions
Emergency
Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
In rooms inside the house.
For drying or unwrinkling/refreshing fabrics.
The dryer must
NEVER...
Be used for purposes other than those described above.
Be modified in terms of its technology or properties.
Hazards
The dryer must not be used by children or persons who have not been
instructed in its use.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
Remove all objects from pockets,
and lighters in particular a risk of explosion.
Do not lean or sit on the door a risk of tipping.
Open the door carefully. Hot steam may escape. The clothes and drum may
be hot a risk of burns.
Installation
Secure loose leads or hoses, otherwise there is a risk of tripping.
Below 0 °C there is a possibility of frost damage.
Mains
connection
Connect the dryer according to specifications to an AC earthed socket,
otherwise it cannot be guaranteed that the appliance is completely safe.
The cable cross-section must be sufficient.
Only use earth-leakage circuit breakers with the following symbol:
The appliance plug and socket must be compatible.
Do not use multiple plugs/connectors and/or extension cables.
Do not touch or hold the appliance plug with wet hands
a risk of electric shock.
Never pull the appliance plug out of the socket by its cable.
Do not damage the mains lead a risk of electric shock.
Operation
Only laundry must be loaded into the drum.
Before switching on the dryer - check the contents.
Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.) a fire/explosion hazard.
Hazard caused by dust (e.g. coal dust, flour): do not use the dryer
a risk of explosion.
Do not put laundry containing foamed material/rubber in the dryer a elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
Switch off the dryer once the programme has ended.
For unwrinkling/refreshing fabrics, use distilled water only. Do not use
condensation, tap water or additives.
Distilled/condensation water is not for drinking.
Defect
Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains
lead must only be replaced by the after-sales service.
Before changing the bulb of the interior light make absolutely sure you have
pulled the appliance plug from the socket a risk of electric shock.
Spare parts
Only use genuine spare parts and accessories for safety reasons.
Disposal
Dryer: unplug the appliance plug, then cut the mains lead from the appliance.
Dispose of the dryer at an approved public disposal facility.
Packaging: keep all packaging out of reach of babies and children.
a danger of suffocation.
All materials are environmentally safe and recyclable. Dispose of in an
environmentally-responsible manner.
Dryer
en Instruction manual
1 2
Reduced temperature for delicate fabrics ', for a longer drying time; e.g.
acrylic, polyamide, elastane or acetate silk.
ˎ &cø
(Low Heat)
Reduces creasing and prolongs the anti-creasing phase after the
programme has finished; can be selected in one of two levels.
ˎ
(Easy-Iron)
Indicators which show the programme sequences.
Drying, Iron Dry, Cupboard Dry, End / Easy Iron.
Status indicators
Icc+cc\
Clean the fluff filter and/or air cooler
a
page 6.
Empty the condensation container.
Fill the water tank with distilled water
a
page 9.
Service indicators
4 clean
. container
u water tank
ˎ Menu
For selecting the settings.
ˎ -/+ (Change)
For changing all the settings in the display panel.
Electronic start
timer
End of the programme after ... (depending on the programme selected, e.g. 1:54h
a
you can always select up to the next full hour).
3 Signal
There are four buzzer volume settings: 0 (off), 1 (quiet), 2 (normal), 3 (loud),4 (very l
# Appliance lock
Provides protection against unintentional changes to the functions set
(press and hold the Menu button for 5 seconds).
9 Fine adjustment
Drying result
The drying result (e.g. cupboard dry) can be increased in three stages (1 - 3) for the
programmes LF Cottons, cEasy-Care, 1øMix and ASuper Quick 40 a prese
After one of these programmes has been finely adjusted, the setting is retained for th
Spin speed
The spin speed that was used in the washing machine;
for more precise indication of the projected drying duration only.
²
... and adapt to individu
Never operate the dryer if it is damaged.
Inform your after-sales service.
Sorting and load
Remove all objects from pockets.
Pay particular attention to cigarette lighters.
The drum must be empty before filling.
If necessary, fill the water tank for
Steam Dry / Steam Refresh programmes
a
pa
See programme overview on page 7.
See also separate instructions for basket for wo
the model)
Your new dryer
Congratulations! - You have chosen a modern, high-quality domestic
appliance from Bosch.
A distinctive feature of the condensation dryer is its low energy
consumption.
Every dryer which leaves our factory is carefully checked to ensure
that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased
to help.
Environmentally-responsible disposal
Dispose of packaging in an environmentally-responsible manner.
This appliance is designated according to European directive
2002/96/EC which governs waste electrical and electronic
equipment (WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
For further information about our products, accessories, spare parts
and services, please visit: www.bosch-home.com
Intended use
Contents Page
ʋ Preparation . . . . . . . . . . . . . . . . . . . . . . 2
ʋ Setting the programmes . . . . . . . . . . . . . 2
ʋ Drying . . . . . . . . . . . . . . . . . . . . . . . . 3/4
ʋ Notes on laundry . . . . . . . . . . . . . . . . . . 5
ʋ Cleaning and care . . . . . . . . . . . . . . . . . . 6
ʋ Overview of programmes . . . . . . . . . . . . 7
ʋ Short spin / Refresh . . . . . . . . . . . . . . 8/9
ʋ Installation . . . . . . . . . . . . . . . . . . . . . . 10
ʋ Frost protection / Transport . . . . . . . . . . 10
ʋ Technical data . . . . . . . . . . . . . . . . . . . 11
ʋ Optional accessories . . . . . . . . . . . . . . .11
ʋ What to do if... / After-sales service . . . . 12
ʋ Safety instructions . . . . . . . . . . . . . . . . 13
Preparing for installation, see page 8
Selecting and adjusting the
Additional functions
Select the dry
Press the
(S
Only if your hands are dry.
Only hold the plug by the plug
casing.
Conne
m
Display panel
Programme selector
All buttons a
a light touch
Display for max. load
capacity for selected programme
ʋ only for domestic use.
ʋ only to be used for drying, refreshing or unwrinkling
fabrics that have been washed with water.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
.
c
(
'c
a
&cøø
)c
a
a
a
a
a
a
a
a
a
a
a
4
\
Read these instructions before operating the dryer.
Observe the safety instructions on page 13.
Caution - risk of scalding.
c
@c
c
LF
ø@
è* è* è* è* è* è* è* è*
+ @ è* è* è* * è* è*
+ @ è* è* è* è* * è* è*
I
øc @ è* è* è* è* è* è*
+ @ è* è*
+ @ è* è* è*
w
@
a
@
H
G
a
L
L
+
Z
O
A
3 4
'
ˎ &cø
ˎ
Icc+cc\
a
a
4
.
u
ˎ
ˎ
54h
a
2h;
1 -24 hrs
3
very loud).
0, 1, 2, 3, 4
# On-Off
9
or the
LF c 1ø A a presetting = 0.
for the others.
0, 1, 2, 3
600-1800 ²
individual requirements
Inspecting
the dryer
and loading laundry
a
page 8.
for woollens (depending on
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ing the programme
the drying programme ...
he
(Start/Stop) button
Connecting the
mains plug
ons are sensitive,
touch is enough!
ʋ
ʋ
3
2
1
Drying / Short spin /
Refresh
Drying
Emptying condensation
Empty the container after each drying cycle, not during drying!
1. Remove the container, holding it level.
2. Pour out condensation.
3. Push the . container back in until it clicks into place.
Cleaning the fluff filter
1. Open the door, remove the filter and fold open.
2. Remove the fluff (by wiping the filter with your hand).
3. Close the filter, insert it again and close the door.
4. Remove fluff from the door and the area around it.
Very dirty or blocked filters should be rinsed under warm
water, and then dried thoroughly.
Clean the filter in the water tank if it is dirty
1. Remove the condensation tank.
2. Remove the filter.
3. Clean the filter under running water.
4. Re-insert the filter and push in the condensation tank until it clicks into
place.
Switching off the dryer
Turn the programme selector to O (Off).
Do not leave damp laundry in the dryer.
Removing the laundry
The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for
an hour (or two hours if you manually select the
c(Easy-Iron) function, depending on the model.)
(
'c
a
&cøø
)c
a
a
a
a
a
a
a
a
a
a
a
Condensation container
Control panel
Air inlet
Fluff filter
Drum
4
Cover for
steam nozzle
Air cooler
Programme end once \ lights up in the display.
Interrupt programme removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The selected programme must then be continued until it is finished.
Hot steam may escape during the Steam Drying / Steam Refresh programmes.
1. Open the door. The drying cycle is paused.
2. Remove or add laundry and close the door.
3. If required, select a new programme and additional functions.
4. Press the
(Start/Stop) button.
Water tank
filling hole
with filter
c
@c
c
LF
ø@
è* è* è* è* è* è* è* è*
+ @ è* è* è* * è* è*
+ @ è* è* è* è* * è* è*
I
øc @ è* è* è* è* è* è*
+ @ è* è*
+ @ è* è* è*
w
@
a
@
H
G
a
L
L
+
Z
O
A
5
6
'
ˎ &cø
ˎ
Icc+cc\
a
a
4
.
u
ˎ
ˎ
a
3
#
9
LF c 1ø A a
²
a
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
.
c
Information on laundry ...
Labelling of fabrics
Follow the manufacturer's care information.
( Drying at normal temperature.
'cDry at a low temperature
a
select &cøø(Low Heat) as well.
)cDo not machine dry.
Do not tumble-dry the following fabrics:
Airtight fabrics (e.g. rubber-coated fabrics).
Delicate materials (silk, curtains made from synthetic material)
a
they may crease.
Oil-stained laundry.
Drying tips
To ensure a consistent result, sort the laundry by fabric type and drying programme.
Close zips, hooks and eyes, and do up any buttons.
Tie belts, apron strings etc. together.
Do not overdry easy-care laundry
a
risk of creasing
Allow laundry to finish drying in the air.
Do not iron laundry immediately after drying, fold items up and leave for a while
a
the remaining moisture will then be distributed evenly.
Knitted fabrics (e.g. T-shirts, jerseys) often shrink slightly the first time they are tumble-dried.
a
Do not select the Cupboard Dry Plus programme.
Starched laundry is not always suitable for dryers
a
starch leaves behind a coating that
adversely affects the drying operation.
When washing laundry that is to be tumble-dried afterwards, dose the fabric softener
according to the manufacturer's instructions.
With a small load, use the Timed Program.
Tips for Short spin/refreshing
Use your dryer for unwrinkling and refreshing fabrics.
Short spin cycle for reducing creasing.
Refresh cycle for eliminating odours from fabrics.
Do not use Short spin/Refresh for the following fabrics:
Wool, leather, fabrics with metal, wooden or plastic parts.
Wax and oil jackets.
Sort the laundry by colour and put on separate short spin/refresh cycles to prevent the
colours from bleeding.
These programmes do not remove stains
a
stains must be treated and removed
beforehand.
For best results, so that the laundry will have as few creases as possible, remove each item
immediately after the programme has finished and hang on a hanger to finish drying. Pull
clothes into shape if required.
Environmental protection/energy-saving tips
Before drying, spin the laundry thoroughly in the washing machine
a
the higher the spin
speed, the shorter the drying time will be (consumes less energy), also spin easy-care
laundry.
Use the maximum recommended capacity, but do not exceed it
a
Page 7, Programme overview.
Make sure the room is well ventilated during drying.
Clean the fluff filter after each drying cycle
a
page 4.
Keep the air cooler clean
a
page 6 Cleaning and care.
Keep the supply of cool air unobstructed
a
Do not cover or block the cooling grill.
Cleaning and care
Dryer housing, control panel, air cooler, moisture sensors
Wipe with a soft, damp cloth.
Do not use harsh cleaning agents and solvents.
Remove detergent and cleaning agent residue immediately.
During drying, water may collect between the door and seal. This does not affect your
dryer's functions in any way.
Clean the protective filter 3 - 4 times a year
or if
4 flashes after the fluff filter has been cleaned.
Air cooler / protective filter
When cleaning, only remove the protective filter. Clean the air cooler
behind the protective filter once a year.
Allow the dryer to cool.
Residual water may leak out, so place an absorbent towel
underneath the maintenance door.
1. Unlock the maintenance door.
2. Open the maintenance door fully.
3. Turn both locking levers towards each another.
4. Pull out the protective filter/air cooler.
Do not damage the protective filter or air cooler.
Clean with warm water only. Do not use any hard or sharp-edged
objects.
5. Clean the air cooler thoroughly.
Allow to drip dry.
6.
Clean the seals.
7. Re-insert the protective filter/air cooler,
with the handle facing down.
8. Turn back both locking levers.
9. Close the maintenance door until the lock clicks into place.
Moisture sensors
The dryer is fitted with stainless steel moisture sensors. The sensors
measure the level of moisture in the laundry. After a long period of
operation, a fine layer of limescale may form on the sensors.
1. Open the door and clean the moisture sensors with a damp sponge
which has a rough surface.
Do not use steel wool or abrasive materials.
Cover for steam nozzle in the drum
After lengthy operation, limescale and fluff may accumulate on
the cover of the steam nozzle. Clean regularly:
1. Open the door and remove the cover with a screw driver.
Clean the cover under running water.
2. Push and click the protective cap back in place.
\
Only when switched off!
c
@c
c
LF
ø@
è* è* è* è* è* è* è* è*
+ @ è* è* è* * è* è*
+ @ è* è* è* è* * è* è*
I
øc @ è* è* è* è* è* è*
+ @ è* è*
+ @ è* è* è*
w
@
a
@
H
G
a
L
L
+
Z
O
A
'
ˎ &cø
ˎ
Icc+cc\
a
a
4
.
u
ˎ
ˎ
a
3
#
9
LF c 1ø A a
²
a
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
.
c
(
'c
a
&cøø
)c
a
a
a
a
a
a
a
a
a
a
a
4
\
7
Programme overview see also pages 5 and 8
After drying ...
T-shirt
Shirts
Trousers
Skirts/dresses
Sportswear
Work clothing
Anoraks
Terry
Bathrobes
Underwear
Socks
Bed linen
Table linen
Terry towels
Tea towels/
hand towels
c
iron
lightly iron
@c
do not iron
c
mangle
LF Cottons
max. 8 kg
For whites and coloureds made of cotton or linen.
Iron Dry
ø@
è* è* è* è* è* è* è* è*
Cupboard Dry +. @ è* è* è* * è* è*
Cupboard Dry Plus +: @ è* è* è* è* * è* è*
IEasy-Care
max. 3.5 kg For non-iron laundry made of synthetic fibres and mixed fabric, cotton.
Iron Dry øc @ è* è* è* è* è* è*
Cupboard Dry +. @ è* è*
Cupboard Dry Plus +: @ è* è* è*
w Steam Dry
For smoothing hard-wearing and easy-care fabrics. Steam smooths the fabrics.
Cottons Non iron
@
max. 2.5 kg
Further information
a
Page 8.
Synthetics Non Iron
@
max. 1.5 kg
H Steam Refresh
For freshening hard-wearing and easy-care fabrics. Steam freshens up the fabrics.
G Business
max. 1.5 kg
Further information
a
Page 8.
L Casual
max. 1.0 kg
LMix
Cupboard Dry +.
max. 3 kg
For washing machine-safe woollens. Fabrics become softer, but are not dried. Remove the laundry after the programme has finished and
hang it up.
Z Sportswear
max. 1.5 kg
For fabrics with membrane coating, waterproof fabrics, functional clothing, fleece (jackets/trousers with removable inner lining are to be
dried separately).
O Wool in basket
max. 1,5 kg
Use with the separate basket only. See the basket for woollens description.
A Super Quick 40
max. 2 kg
For laundry that needs to be dried quickly, e.g. items made of synthetic fibres, cotton or mixed fabrics. The values may differ from those
given depending on the type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and size of the load.
Time program warm
max. 3 kg
For pre-dried, multi-layered delicate fabrics made of acrylic, or small, individual items of laundry. Also for subsequent drying.
0311 / 9000631759
*631759*
Robert Bosch Hausgeräte
GmbH
Carl-Wery-Str. 34
D-81739 Munich/Germany
WTS865B4SN
8
Steam Drying - Steam Refresh
Steam programmes for unwrinkling or refreshing
Your dryer has unwrinkling and refreshing programmes that can be used for removing
odours and minimising creasing in dry fabrics. Steam smooths and freshens up items of
clothing.
Sorting the laundry according to size, weight, fabric and colour is necessary.
Only use Short spin/Refresh for fabrics with the same properties.
During steam generation (required), additional noises may occur.
The result of refreshing and unwrinkling may vary depending on the type of fabric, size of
the load and programme selected.
After unwrinkling or refreshing, all fabrics must be removed immediately and hung crease-
free on a hanger or a washing line for 15 minutes.
Programmes
Please observe the treatment symbols and manufacturer's instructions on the fabrics.
Do not use Short spin/Refresh for fabrics made of wool, leather, containing metal or
wooden parts as well as wax and oil jackets!
Do not use any dryer cleaning sets!
ʑ
w Steam Dry
@ Synthetics Non iron
Suitable for easy-care fabrics, e.g. formal shirts. Fabrics are smoothed. You can expect
optimum results if non-iron appears on the care label. After the programme has finished,
the items must be removed immediately and hung crease-free on a hanger or washing line
for 15 minutes. The programme is for up to 5 formal shirts.
@ Cottons Non Iron
Suitable for hard-wearing cotton fabrics, e.g. bed linen, tablecloths or formal shirts. Fabrics
are smoothed. You can expect optimum results if non-iron appears on the care label. After
the programme has finished, the items must be removed immediately and hung crease-free
on a hanger or washing line for 15 minutes. The programme is for up to 5 formal shirts or
1 to 2 larger items.
ʑ
H Steam Refresh
G Business
Suitable for refreshing suits, jackets and trousers, or dry-clean items that cannot be washed
in the washing machine a see the care label. The programme only refreshes fabrics and
does not clean them. After the end of the programme, the items must be removed
immediately. Programme for 1 suit or 1 to 2 smaller items.
L Casual
Suitable for refreshing casual wear made of cotton or artificial fibres. Fabrics must be
suitable for dryers a see the care label. The programme refreshes fabrics only, and does
not clean them. After the programme has finished, the fabrics must be removed
immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.
9
Steam Drying - Steam Refresh
Your water tank empties automatically after the programme has finished.
Cleaning is therefore not required
Filling the water tank:
Fill the dryer's water tank with distilled water before every Steam Dry - Steam Refresh cycle.
1.
Move the programme selector to Steam Dry
or Steam Refresh.
The u symbol appears in the display.
2. Remove the condensation tank completely.
Before every Steam Dry - Steam Refresh cycle, fill the water tank with
distilled water only. Do not use tap water, condensation or additives.
3. Fill the water tank. Use the jug supplied.
If the water tank filter is dirty a clean the filter in the water tank.
See page 4.
4. Pour the distilled water into the filling hole on the water tank,
until the u symbol goes out on the display panel.
If drying the recommended load, approximately 250 to 300 ml of distilled
water is used in the Steam Dry - Steam Refresh programmes.
5. Insert the condensation container all the way.
6. Start the Steam Dry or Steam Refresh programme.
a
a
a
a
ʠ
ʠ
LF
+
c
+
ʠ
a
ʠ
ʠ
ā a
ʠ
4 a
a
ʠ
u
a
a
ʠ
ʠ
ʠ
ʠ
ʠ
ʠ
a
a
a
a
ʠ
a
a
a a
a
ʠ
ʠ
a
a
ʠ
a
a
a
a
a
a
a
a
a
a
ʑ
w
@
@
ʑ
H
G
a
L
a
u
a
u
10
Installation
Scope of delivery: dryer, installation and instruction manual, jug, basket for woollens
(depending on the model).
Check dryer for transport damage.
The dryer is heavy. Do not attempt to lift it on your own.
Be careful to avoid sharp edges.
Do not install in a room where there is a risk of freezing. Freezing water may cause damage.
If in doubt, have the appliance connected by a specialist.
Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.
Setting up the dryer
The appliance plug must always be accessible.
Ensure that the appliance is installed on a clean, level
and firm surface.
Keep the cooling grille on the front of the dryer
clear.
Keep the area around the dryer clean.
Level the dryer using the threaded feet.
Use a spirit level.
Do not remove the threaded feet under any
circumstances.
Mains connection see safety information a page 13.
Connect to an AC earthed socket. If in doubt, have the socket checked by a specialist.
The mains voltage and the voltage shown on the rating plate (a Page 11) must be the same.
The connected load and necessary fuse protection are specified on the rating plate.
Frost protection / Transport
Preparation
1. Empty the condensation container a page 4.
2. Select any programme using the programme selector.
3. Press the (Start/Stop) button a condensation is pumped into the container.
4. Wait 5 min., and then empty the condensation container again.
5. Turn the programme selector to O (Off).
The water tank must not contain any distilled water. If necessary, run the Steam/Refresh programme.
1.
Remove all accessories
from the drum.
The drum must be empty.
Make sure that the air inlet
remains unobstructed
Clean and level
Do not install the dryer behind a door or sliding
door, which could prevent or restrict opening of the
dryer door. This will prevent children from locking
themselves in and putting their lives in danger.
2.
Do not operate the dryer if there
is a danger of frost.
11
Technical data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (adjustable height)
Weight approximately 43.5 kg
Max. capacity 8 kg
Condensation container 4.0 l
Water tank approx. 0.4 l
Connection voltage 220-240 V
Connected load max. 2,800 W
Fuse protection 10 A
Ambient temperature 5 - 35 °C
Product number
Production number
Inside of door
The rating plate can be found on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions. The value on the label is achieved at the
maximum heat setting.
Spin speed in rpm
(residual moisture)
Drying time
in min.**
Energy
consumption
in kWh**
LF Cottons 8 kg 10 A 10 A
+. Cupboard Dry 1400 (approx. 50 %) 131 3.74
1000 (approx. 60 %) 148 4.49
800 (approx. 70 %) 165 5.17
Iron Dry 1400 (approx. 50 %) 109 2.24
1000 (approx. 60 %) 126 3.44
800 (approx. 70 %) 143 3.86
cEasy-Care 3.5 kg 1000 45 1.05
+. Cupboard Dry 800 (approx. 40 %) 48 1.35
600 (approx. 50 %) 60 1.65
*Test programme to DIN EN 61121
**The values may differ from those given, depending on overvoltage and undervoltage, the
type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and
the size of the load.
ʠ
Drum interior light (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and after the programme has
started. The light goes out automatically. To change the bulb a page 12.
Optional accessories (order from the after-sales service using the order number)
Connecting kit for condensation outlet
The condensation is drained off immediately via a hose.
Washer-dryer stack connection set
The dryer can be stacked on top of a suitable washing machine of the same depth and width,
to save space. The dryer must be secured to the washing machine with this connection set.
Installation underneath the worktop
Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.
WTZ
1110
WTZ
11320
WTZ
10290
ʠ
ʠ
ā a
ʠ
4 a
a
ʠ
u
a
a
ʠ
ʠ
ʠ
ʠ
ʠ
ʠ
a
a
a
a
ʠ
a
a
a a
a
ʠ
ʠ
a
a
ʠ
a
a
a
a
a
a
a
a
a
a
ʑ
w
@
@
ʑ
H
G
a
L
a
u
a
u
a
a
a
a
ʠ
ʠ
LF
+
c
+
ʠ
a
12
What to do if...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to O (Off) and remove the appliance plug from the socket.
ʠ
The (Start/Stop) indicator
light does not come on.
Mains plug plugged in?
Programme selected?
ʠ
The ā symbol and (Start/
Stop) indicator light are flashing.
Empty the condensation container a page 4.
Check the condensation outlet hose, if applicable (kink).
ʠ
The 4 symbol and (Start/
Stop) indicator light are flashing.
Clean the air cooler a page 6 Cleaning and care.
Clean the fluff filter a page 4.
ʠ
The u symbol flashes. Is the water tank empty?
Filling with distilled water a Page 9.
The filter in the water tank may have become dirty.
If so, clean the filter in the water tank a Page 4.
ʠ
The Steam Dry - Steam Refresh
does not start.
ʠ
Dryer does not start. Has the (Start/Stop) button been pressed? Is the door
closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out. Make sure the dryer is level.
Clean the air cooler seal.
ʠ
The door opens by itself. Push the door closed until you hear it click into place.
ʠ
Items crease even though the
Steam Dry - Steam Refresh
programme has been selected.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
ʠ
Drying result was not achieved
(laundry too damp).
Hot laundry feels damper than it actually is.
The selected programme does not suit the load. Use
another drying programme or, in addition, select the time
programme a page7.
Use fine adjustment for the drying result a page1/2.
Fine layer of limescale on the humidity sensors a Clean
the humidity sensors apage 9.
Programme cancellation, e.g. tank full, mains power supply
failure, door open or maximum drying time reached.
ʠ
Drying time too long. Clean the fluff filter under running
water a page 4.
Insufficient supply of air a ensure that air can circulate.
Air inlet possibly blocked
a Clear inlet a page 8.
Ambient temperature higher than 35 °C a Ventilate the
room.
ʠ
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
ʠ
One or more programme status
indicator lamps are flashing.
Clean the filter and air cooler a page 4/6.
Check the installation conditions a page 10.
Switch off, allow to cool, switch on again and restart the
programme.
ʠ
The interior light (depending on
the model) does not work.
Unplug the appliance plug, fold back the cover cap on the
inside above the door (using a Torx 20 screwdriver) and
replace the bulb. Close the cover cap.
13
Safety instructions
Emergency
Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
In rooms inside the house.
For drying or unwrinkling/refreshing fabrics.
The dryer must
NEVER...
Be used for purposes other than those described above.
Be modified in terms of its technology or properties.
Hazards
The dryer must not be used by children or persons who have not been
instructed in its use.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
Remove all objects from pockets,
and lighters in particular
a risk of explosion.
Do not lean or sit on the door a risk of tipping.
Open the door carefully. Hot steam may escape. The clothes and drum may
be hot
a risk of burns.
Installation
Secure loose leads or hoses, otherwise there is a risk of tripping.
Below 0 °C there is a possibility of frost damage.
Mains
connection
Connect the dryer according to specifications to an AC earthed socket,
otherwise it cannot be guaranteed that the appliance is completely safe.
The cable cross-section must be sufficient.
Only use earth-leakage circuit breakers with the following symbol:
The appliance plug and socket must be compatible.
Do not use multiple plugs/connectors and/or extension cables.
Do not touch or hold the appliance plug with wet hands
a risk of electric shock.
Never pull the appliance plug out of the socket by its cable.
Do not damage the mains lead
a risk of electric shock.
Operation
Only laundry must be loaded into the drum.
Before switching on the dryer - check the contents.
Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.)
a fire/explosion hazard.
Hazard caused by dust (e.g. coal dust, flour): do not use the dryer
a risk of explosion.
Do not put laundry containing foamed material/rubber in the dryer a elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
Switch off the dryer once the programme has ended.
For unwrinkling/refreshing fabrics, use distilled water only. Do not use
condensation, tap water or additives.
Distilled/condensation water is not for drinking.
Defect
Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains
lead must only be replaced by the after-sales service.
Before changing the bulb of the interior light make absolutely sure you have
pulled the appliance plug from the socket
a risk of electric shock.
Spare parts
Only use genuine spare parts and accessories for safety reasons.
Disposal
Dryer: unplug the appliance plug, then cut the mains lead from the appliance.
Dispose of the dryer at an approved public disposal facility.
Packaging: keep all packaging out of reach of babies and children.
a danger of suffocation.
All materials are environmentally safe and recyclable. Dispose of in an
environmentally-responsible manner.
ʑ
w
@
@
ʑ
H
G
a
L
a
u
a
u
a
a
a
a
ʠ
ʠ
LF
+
c
+
ʠ
a
ʠ
ʠ
ā a
ʠ
4 a
a
ʠ
u
a
a
ʠ
ʠ
ʠ
ʠ
ʠ
ʠ
a
a
a
a
ʠ
a
a
a a
a
ʠ
ʠ
a
a
ʠ
a
a
a
a
a
a
a
a
a
a
Dryer
en Instruction manual
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Bosch WTS865B4SN/35 Operat./Install.Instruct./Program table
- Tipo
- Operat./Install.Instruct./Program table
- Questo manuale è adatto anche per
in altre lingue
- English: Bosch WTS865B4SN/35
Documenti correlati
-
Bosch WTS865B2SN/20 Operat./Install.Instruct./Program table
-
-
-
-
-
-
-
-
-