Yamaha TX-497 Manuale del proprietario

Categoria
Radio
Tipo
Manuale del proprietario
YAMAHA ELECTRONICS CORPORATION, USA
6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD.
135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H.
SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A.
RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD.
YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B.
J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD.
17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
©
2005 All rights reserved.
TX-497
Printed in Malaysia WG01010
TX-497
Stereo Tuner
Tuner Stéréo
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
E
00_TX-497_E-cv.fm Page 1 Friday, September 2, 2005 10:19 AM
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place – away from direct sunlight, heat sources, vibration,
dust, moisture, and/or cold. Allow ventilation space of at least
10 cm on the top, and 10 cm on the back of this unit.
3 Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign objects may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
Other components, as they may cause damage and/or
discoloration on the surface of this unit.
Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any damage
resulting from use of this unit with a voltage other than
specified.
13 To prevent damage by lightning, keep the power cord and
outdoor antennas disconnected from a wall outlet or the unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
17 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that this unit is
faulty.
18 Before moving this unit, press POWER to set this unit in the
standby mode, and disconnect the AC power plug from the
wall outlet.
19 VOLTAGE SELECTOR (Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
into the AC main supply. Voltages are:
Asia and General models
.....AC 110
120/220
240 V, 50/60 Hz
For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
The plug severed from the mains lead must be destroyed, as a
plug with bared flexible cord is hazardous if engaged in a live
socket outlet.
Special Instructions for U.K. Model
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
As long as this unit is connected to the AC wall outlet,
it is not disconnected from the AC power source even
if you turn off this unit by POWER.
Note
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
1
English
SETUPINTRODUCTION
OPERATIONS
ADDITIONAL
INFORMATION
FEATURES............................................................. 2
SUPPLIED ACCESSORIES ................................. 2
CONTROLS AND FUNCTIONS ......................... 3
Front panel ................................................................. 3
Front panel display .................................................... 4
Rear panel .................................................................. 5
CONNECTIONS .................................................... 6
Connecting the AM and FM antennas ....................... 6
Connecting an amplifier ............................................ 9
Controlling this unit with a remote control................ 9
Connecting the power supply cord .......................... 10
Turning on the power............................................... 10
TUNING ................................................................ 11
Automatic and manual tuning.................................. 11
Presetting stations .................................................... 12
Selecting preset stations........................................... 14
Exchanging preset stations ...................................... 14
Receiving Radio Data System stations.................... 15
Changing the Radio Data System mode .................. 16
PTY SEEK function ................................................ 17
EON function........................................................... 18
TROUBLESHOOTING....................................... 19
SPECIFICATIONS .............................................. 21
CONTENTS
INTRODUCTION
SETUP
OPERATIONS
ADDITIONAL INFORMATION
FEATURES
2
40-station random access preset tuning
Automatic preset tuning
Multi-status station memory
Direct PLL synthesizer tuning
Preset station shifting capability (preset
editing)
Multi-functions for Radio Data System
broadcast reception (U.K. and Europe
models only)
y indicates a tip for your operation.
This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and product, the product has priority.
Please check that you received all of the following parts.
FEATURES
SUPPLIED ACCESSORIES
AM loop antenna
Indoor FM antenna
Audio pin cable
Antenna adapter
(U.S.A. and Canada
models only)
75-ohm/300-ohm
antenna adapter
(U.K. model only)
CONTROLS AND FUNCTIONS
3
English
INTRODUCTION
1 POWER
Turns on or off the power of this unit.
2 Remote control sensor
Receives signals from a remote control provided with a
YAMAHA amplifier or receiver.
3 Front panel display
Shows information about the operational status of this unit
(see page 4).
4 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory (see page 13).
Hold down this button for more than 3 seconds to start
automatic preset tuning (see page 12).
5 FM/AM (FM/MW/LW for U.K. and Europe
models)
Press this button to switch the reception band between FM
and AM (FM, MW and LW for U.K. and Europe models).
6 EDIT
Exchanges preset station numbers (see page 14).
7 TUNING MODE (AUTO/MAN’L)
Switches between automatic tuning (AUTO indicator on)
and manual tuning (AUTO indicator off).
8 A/B/C/D/E
Selects one of the 5 preset station groups (A to E).
9 Preset station buttons
Select a preset station number (1 to 8).
0 l TUNING h
Selects a frequency.
Press l to tune into a lower frequency.
Press h to tune into a higher frequency.
U.K. and Europe models only
The Radio Data System tuning buttons numbered from A
to D are only applicable to the U.K. and Europe models.
A FREQ/TEXT
Press this button when the unit is receiving a Radio Data
System station to cycle the display between the PS mode,
PTY mode, RT mode, CT mode (if the station offers those
Radio Data System data services) and/or the frequency
display (see page 16).
B PTY SEEK MODE
Press this button to set the unit to the PTY SEEK mode
(see page 17).
C PTY SEEK START
Press this button to begin searching for a station after the
desired program type has been selected in the PTY SEEK
mode (see page 17).
D EON
Press this button to select a radio program type (NEWS,
INFO, AFFAIRS, SPORT) to tune in automatically
(see page 18).
CONTROLS AND FUNCTIONS
Front panel
FREQ/TEXT
FREQ/TEXT
EON
EON
MODE
MODE
PTY SEEK
PTY SEEK
START
START
FM/AM EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MAN'L
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW
135467
8
9 0
2
BACD
(U.K. and Europe models)
(U.K. and Europe
models)
CONTROLS AND FUNCTIONS
4
1 Preset station indicator
Displays the group (A to E) and number (1 to 8) of the
selected preset station.
2 Station frequency display
Displays the band and frequency or information about the
station being received.
3 AUTO indicator
Lights up to indicate that automatic tuning is possible.
4 ST (stereo) indicator
Lights up when this unit is receiving a strong signal for an
FM stereo broadcast.
5 Signal-level meter
Indicates the signal level of the station being received.
If multi-path interference is detected, the indication
decreases.
6 EDIT indicator
Flashes to indicate that preset station exchange is possible.
Lights up to indicate that preset station exchange was
successful.
7 MEMO indicator
Flashes for about 5 seconds after MEMORY on the front
panel is pressed. While the MEMO indicator is flashing,
store the displayed station in the system memory by using
A/B/C/D/E and one of the preset station buttons on the
front panel.
U.K. and Europe models only
The indicators numbered from 8 to A are only
applicable to the U.K. and Europe models.
8 Radio Data System indicators
The name(s) of the Radio Data System data offered by the
currently received Radio Data System station light(s) up.
The indicator on the left side of each name (the
rectangular-shaped shaded area) lights up when the
corresponding Radio Data System mode is selected.
9 EON indicator
Lights up when the Radio Data System station that offers
the EON data service is being received.
0 Program type indicators
Indicate the selected radio program type (NEWS, INFO,
AFFAIRS or SPORT) while this unit is in the EON mode
(see page 18).
A PTY HOLD indicator
PTY HOLD lights up while searching for stations in the
PTY SEEK mode.
Front panel display
kHz
MHz
AUTO
ST
MEMO
PS
PTY
RT CT
EON
NEWS INFO AFFAIRS SPORT
PTY HOLD
EDIT
1
7
2 4 53
A
8
9
0
6
CONTROLS AND FUNCTIONS
5
English
INTRODUCTION
1 FM ANT terminal
See page 6 for connection information.
2 AM ANT terminal
See page 6 for connection information.
3 LINE OUT jacks
See page 9 for connection information.
4 AC power cord
Plug the power cord into an AC inlet after all connections
are complete (see page 10).
Asia and General models only
The FREQUENCY STEP switch and VOLTAGE
SELECTOR are only applicable to the Asia and General
models.
FREQUENCY STEP switch
See page 8 for details.
VOLTAGE SELECTOR
See page 10 for details.
Rear panel
FM ANT FREQUENCY STEP
FREQUENCY STEP
FM 100kHz 50kHz
FM 100kHz 50kHz
AM 10kHz 9kHz
AM 10kHz 9kHz
LINE OUT VOLTAGE
VOLTAGE
SELECTER
SELECTER
220V-240V
220V-240V
110V-120V
110V-120V
75
UNBAL
AM ANTGND
R L
2
132 4
(U.S.A. model)
CONNECTIONS
6
Do not connect this unit or other components to the mains power until all connections are complete.
Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal
strength. Connect each antenna correctly to the designated terminals.
CONNECTIONS
CAUTION
Connecting the AM and FM antennas
FM ANT
75 UNBAL
AM ANTGND
AM loop antenna
(included)
Indoor FM antenna
(included)
Outdoor AM antenna
Use a 5 to 10 m of vinyl-
covered wire extended
outdoors from a window.
Outdoor FM antenna
Antenna adapter
(included for U.S.A. and
Canada models only)
300-ohm
feeder cable
75-ohm
coaxial cable
75-ohm/300-ohm antenna adapter
(included for U.K. model only)
Ground (GND terminal)
For maximum safety and
minimum interference, connect
the antenna GND terminal to a
good earth ground. A good earth
ground is a metal stake driven into
moist earth.
75-ohm
coaxial cable
7
English
CONNECTIONS
SETUP
Connecting the AM loop antenna
1 Set up the AM loop antenna.
2 Press down the tab to insert the AM loop
antenna lead wires into the AM ANT and GND
terminals and then snap the tab back into
place to fasten the wires.
3 Orient the AM loop antenna for the best
reception.
The AM loop antenna should be placed away from this unit.
A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality, an
outdoor antenna may improve the quality. It is recommended
that you should connect a 5 to 10 m of vinyl-covered wire to the
AM ANT terminal and extend it outdoors from a window.
Consult the nearest authorized YAMAHA dealer or service
center for more details about outdoor antennas.
The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
Connecting the indoor FM antenna
Insert the rectangular end of the indoor FM
antenna into the FM ANT terminal.
A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality, an
outdoor antenna may improve the quality. Consult the nearest
authorized YAMAHA dealer or service center about outdoor
antennas.
If you connect an outdoor FM antenna to this unit, do not
connect the indoor FM antenna to this unit.
Connecting the outdoor FM antenna
If this unit is installed inside a steel building or at a great
distance from the transmitter, it may be necessary to
install an outside long wire antenna.
Use a 75-ohm/300-ohm antenna adapter (included for
U.K. model only) or an antenna adapter (included for
U.S.A. and Canada models only) for connections.
Notes
1
3
2
Notes
FM ANT
75
UNBAL
AM ANTGND
Indoor FM antenna
FM ANT
75
UNBAL
AM ANTGND
Antenna adapter
(included for
U.S.A. and Canada
models only)
75-ohm coaxial cable
75-ohm/300-ohm
antenna adapter
(included for
U.K. model only)
300-ohm
feeder cable
75-ohm
coaxial cable
8
CONNECTIONS
Connecting a coaxial cable to the
75-ohm/300-ohm antenna adapter
(included for U.K. model only)
1 Open the cover of the
included 75-ohm/300-ohm
antenna adapter.
2 Cut the external sleeve
of the 75-ohm coaxial
cable and prepare it for
connection.
3 Cut the lead wire and
remove it.
4 Insert the cable
wire into the slot,
and clamp it with
pliers.
5 Snap the cover into place.
Notes on the 75-ohm coaxial and
the 300-ohm feeder cables
Consult with your dealer or authorized service center
about the best method of selecting and erecting an outdoor
FM antenna. The choice of the feeder cable is also
important. Flat ribbon-shaped twin-lead cable performs
well electrically, and is cheaper and somewhat easier to
handle when routing it through windows and around
rooms. Coaxial cable is more expensive, does a much
better job of minimizing interference, is less prone to the
effects of weather and close-by metal objects, and is
nearly as good a signal conductor as feeder cable,
particularly for foam-type coaxial cables. Coaxial cable is
somewhat more difficult to install at the point where the
cable enters the building. If coaxial cable is selected, make
sure the antenna is designed to be used with that type of
cable.
To minimize interference from automobile ignition, locate the
antenna as far from heavy traffic as possible.
Keep the feeder cable or coaxial cable as short as possible. Do
not bundle or roll up excess cable.
The antenna should be placed at least 2 meters from reinforced
concrete walls or metal structures.
FREQUENCY STEP switch
(Asia and General models only)
Because the interstation frequency
spacing differs in different areas, set
the FREQUENCY STEP switch on
the rear panel of this unit according to
the frequency spacing in your area.
North, Central and South America:
100 kHz/10 kHz
Other areas: 50 kHz/9 kHz
Before setting this switch, disconnect this unit’s AC power
plug from the AC wall outlet.
11
8
6
Unit: mm
Lead wire
Clamp
Clamp
Insert the wire
into the slot
Notes
300-ohm feeder
cable
75-ohm coaxial
cable
FREQUENCY STEP
FM 100kHz 50kHz
AM 10kHz 9kHz
9
English
CONNECTIONS
SETUP
Do not connect this unit or other components to the main
power until all connections between components are
complete.
Be sure to connect the left (“L”) and right (“R”) LINE OUT jacks
to the corresponding (left and right) input jacks of the amplifier.
This unit has a remote control sensor. It receives signals
from a remote control provided with a YAMAHA
amplifier or AV receiver.
Do not place any large obstacles between the remote control
and this unit.
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type fluorescent lamp), you may
not be able to control this unit using the remote control. In this
case, reposition this unit to avoid direct lighting.
Connecting an amplifier
CAUTION
Note
FM ANT FREQUENCY STEP
FREQUENCY STEP
FM 100kHz 50kHz
FM 100kHz 50kHz
AM 10kHz 9kHz
AM 10kHz 9kHz
LINE OUT VOLTAGE
VOLTAGE
SELECTER
SELECTER
220V-240V
220V-240V
110V-120V
110V-120V
75 UNBAL
AM ANTGND
R L
2
STANDBY
/ON
STANDBY
INPUT
PHONES SPEAKERS BASS
5
1
4
2
3
5
1
4
2
3
A
POWER
ON
OFF
ON
OFF
AUX MD TAPE CD/DVD TUNER PHONO PURE DIRECT CD/DVD DIRECT AMP
B
+
TREBLE
5
1
4
2
3
5
1
4
2
3
+
BALANCE
5
1
4
2
3
5
1
4
2
3
TUNER
PHONO
TAPE
MD
AUX
R
L
LOUDNESS REC OUT
VOLUME
7
30dB
FLAT CD/DVD
10
9
5
6
1
4
2
3
CD/DVD PHONO TUNER
POWER
STANDBY
MD
TAPE AUX
+
u
d
DISPLAY
A/B
REC
DISC
DIR A
p
DIR B
A/B/C/D/E
PRESET
VOLUME
TAPECD
w
e
f
b
s
a
TUNER
LR
LR
To an AC wall outlet
Audio pin cable
(included)
Amplifier
This unit (U.S.A. model)
Controlling this unit with a remote control
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MAN'L
30
30
Approximately 6 m
Notes
10
CONNECTIONS
Connecting the AC power cord
Plug the power cord into an AC wall outlet.
Memory back-up
The memory back-up circuit prevents the stored data from
being lost. However, the stored data will be lost if this unit
is turned off for more than one week even when the power
cord is connected.
VOLTAGE SELECTOR
(Asia and General models only)
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local main voltage BEFORE plugging
into the AC main supply.
Voltages are 110-120/220-240 V AC, 50/60 Hz.
When all connections are complete, turn on the power of
this unit.
Press POWER to turn on the power of this unit.
Connecting the power supply cord
VOLTAGE
SELECTOR
220V-240V
110V-120V
(Asia and General models)
Turning on the power
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
POWER
POWER
TUNING
11
English
OPERATIONS
There are 2 tuning methods; automatic and manual.
Automatic tuning is effective when station signals are
strong and there is no interference.
Automatic tuning
1 Press FM/AM (FM/MW/LW for U.K. and
Europe models) to select the reception band.
“FM” or “AM” (“FM”, “MW” or “LW” for U.K. and
Europe models) appears in the front panel display.
2 Press TUNING MODE (AUTO/MAN’L) so that
the AUTO indicator lights up in the front
panel display.
3 Press TUNING l / h once to begin
automatic tuning.
Press h to tune into a higher frequency, or
press l to tune into a lower frequency.
When tuned into a station, the frequency of the
received station is shown in the front panel display.
To search for another station, press TUNING l / h
once more.
Manual tuning
If the signal from the station you want to select is weak,
tune into it manually. Manually tuning into an FM station
will automatically switch the tuner to monaural reception
to increase the signal quality.
1 Press FM/AM (FM/MW/LW for U.K. and
Europe models) to select the reception band.
“FM” or “AM” (“FM”, “MW” or “LW” for U.K. and
Europe models) appears in the front panel display.
2 Press TUNING MODE (AUTO/MAN’L) so that
the AUTO indicator disappears from the front
panel display.
3 Press TUNING l / h to tune into the desired
station manually.
Hold down the button to continue searching.
If you tune into an FM station, it is automatically received in
monaural mode to increase signal quality.
When tuned into a station, the frequency of that station is shown
in the front panel display. If a Radio Data System station that
employs the PS data service is received, the station name is
displayed instead of the frequency. See page 15 for details.
TUNING
Automatic and manual tuning
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
1
2
3
FM/AM
or
TUNING MODE
AUTO/MAN'L
AUTO
Lights up
TUNING
hl
Notes
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
1
2
3
FM/AM
or
TUNING MODE
AUTO/MAN'L
Disappears
AUTO
TUNING
hl
12
TUNING
Automatically presetting FM stations
You can use the automatic preset tuning feature to store
FM stations. This function enables this unit to
automatically tune into FM stations with strong signals,
and to store up to 40 (8 stations in 5 groups, A1 through
E8) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.
1 Press FM/AM (FM/MW/LW for U.K. and
Europe models) to select the FM band.
“FM” appears in the front panel display.
2 Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset group and MEMO and AUTO indicators
flash. Automatic presetting starts from the frequency
currently displayed and proceeds toward the higher
frequencies.
When automatic preset tuning is complete, the front
panel display shows the frequency of the last preset
station.
Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
If the number of received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it by following the procedure in “Manually presetting
stations”.
If no station is received using the automatic preset tuning
method, “NOTHING” is displayed in the front panel display for
about 3 seconds and the search ends.
Presetting stations
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
1
2
FM/AM
MEMORY
MAN'L/AUTO FM
MHz
AUTO
ST
MEMO
Notes
13
English
TUNING
OPERATIONS
Manually presetting stations
You can also store up to 40 stations (8 stations x 5 groups)
manually.
1 Tune into a station.
See page 11 for tuning instructions.
When tuned into a station, the front panel display
shows the frequency of the station received.
2 Press A/B/C/D/E repeatedly to select a preset
station group (A to E) in the front panel
display.
The station group is displayed in the front panel
display.
3 Press MEMORY (MAN’L/AUTO FM).
The MEMO indicator flashes for about 5 seconds.
4 Press the preset station number button
(1 to 8) you want to store while the MEMO
indicator is flashing.
5 Repeat steps 1 to 4 to store other stations.
Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
The reception mode (stereo or monaural) is stored along with
the station frequency.
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
2
3
4
MHz
ST
A/B/C/D/E
MEMORY
MAN'L/AUTO FM
MEMO
Flashes
Notes
23456781
MHz
AUTO
ST
Shows the displayed station has
been stored as A1.
14
TUNING
You can tune any desired station simply by selecting the
preset station number under which it was stored.
1 Press A/B/C/D/E repeatedly to select a preset
station group (A to E) in the front panel
display.
The station group is displayed in the front panel
display.
2 Press a preset station number button to
select the preset station number (1 to 8).
The preset station number appears in the front panel
display along with the station band and frequency.
In some cases, you may not be able to select a preset station that
could be received using the automatic tuning method. This is due
to the large volume of Program Identification (PI) data received
along with the station.
You can exchange the assignment of two preset stations
with each other. The example below describes the
procedure for exchanging preset station “E1” with “A5”.
1 Select preset station “E1”.
See “Selecting preset stations”.
2 Press EDIT.
“E1” and the EDIT indicator flash in the front panel
display.
3 Select preset station “A5” using A/B/C/D/E
and the preset station number buttons.
“A5” and the EDIT indicator flash in the front panel
display.
Selecting preset stations
Note
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
1
2
A/B/C/D/E
23456781
MHz
AUTO
AUTO
ST
Exchanging preset stations
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
3
3
2,4
EDIT
MHz
ST
EDIT
MHz
ST
EDIT
15
English
TUNING
OPERATIONS
4 Press EDIT again.
The stations stored at the two preset assignments are
exchanged.
Radio Data System is a data transmission system used by
FM stations in many countries. The Radio Data System
function is carried out among the network stations.
This unit can receive various Radio Data System data such
as PI (Program Identification), PS (Program Service
name), PTY (Program Type), RT (Radio Text), CT (Clock
Time), EON (Enhanced Other Networks) when receiving
Radio Data System broadcasting stations.
PS (Program Service name) mode
Displays the name of the station being received. If the
station does not employ the PS data service, this mode will
not be selected.
PTY (Program Type) mode
Displays the type of the program being broadcast on the
station being received. If the station does not employ the
PTY data service, this mode will not be selected.
(To search for a station which is broadcasting the type of
program you want to listen to, see “PTY SEEK function”
on page 17.)
There are 15 program types to classify Radio Data System
stations.
EDIT
EDIT
Shows the exchange of stations is
complete.
Receiving Radio Data System
stations
NEWS News
AFFAIRS Current affairs
INFO General information
SPORT Sports
EDUCATE Education
DRAMA Drama
CULTURE Culture
SCIENCE Science
VARIED Light entertainment
POP M Pops
ROCK M Rock
M.O.R. M Middle-of-the-road music
(easy-listening)
LIGHT M Light classics
CLASSICS Serious classics
OTHER M Other music
16
TUNING
RT (Radio Text) mode
Displays information about the program (such as the title
of the song or name of the singer) on the Radio Data
System station being received using a maximum of 64
alphanumeric characters, including the umlaut symbol. If
other characters are used for RT data, they are displayed
with an underbar ( _ ). If the station does not employ the
RT data service, this mode will not be selected.
CT (Clock Time) mode
Displays the current time, and is updated every minute.
If the data are accidentally cut off, “CT WAIT” may
appear. If the station does not employ the CT data service,
this mode will not be selected.
EON (Enhanced Other Networks)
See “EON function” on page 18.
Four modes are available for displaying Radio Data
System data. The PS, PTY, RT and/or CT indicators that
correspond to the Radio Data System data services offered
by the station light up in the front panel display.
Press FREQ/TEXT repeatedly to display the
various Radio Data System data offered by the
transmitting station.
Do not press FREQ/TEXT until a Radio Data System indicator
lights up in the front panel display. You cannot change the mode
if you press the button prior to this. This is because this unit has
not finished receiving all of the Radio Data System data from
the station.
Radio Data System data not offered by the station cannot be
selected.
This unit cannot utilize the Radio Data System data source if
the signal received is not strong enough. In particular, the RT
mode requires a large amount of data, so it is possible that the
RT mode may not be displayed even if other Radio Data System
modes (PS, PTY, etc.) are displayed.
Radio Data System data may not be received under poor
reception conditions. In such cases, press TUNING MODE
(AUTO/MAN’L) so that the AUTO indicator disappears from
the front panel display. Although this will change the reception
mode to manual, Radio Data System data may be displayed
when you change the display to Radio Data System mode.
If the signal strength is weakened by external interference
during the reception of a Radio Data System station, the Radio
Data System data service may be cut off suddenly and
“...WAIT” will appear in the front panel display.
Changing the Radio Data System
mode
Notes
FREQ/TEXT
PS
PTY
RT
CT
Frequency display
17
English
TUNING
OPERATIONS
If you select the desired program type, this unit
automatically searches all preset Radio Data System
stations that are broadcasting a program of the required
type. There are currently 15 program classifications
available (see page 15).
1 Press PTY SEEK MODE to set this unit in the
PTY SEEK mode.
The program type of the station being received or
“NEWS” flashes in the front panel display.
To exit from the PTY SEEK mode, press PTY SEEK
MODE again.
2 Press TUNING l / h to select the desired
program type.
The selected program type appears in the front panel
display.
3 Press PTY SEEK START to begin searching
all preset Radio Data System stations.
The selected program type flashes and the PTY
HOLD indicator lights up in the front panel display
while searching for stations.
To cancel searching, press PTY SEEK START again.
To cancel this function, press PTY SEEK MODE
again.
The unit stops searching when it finds a station
broadcasting the selected type of program.
If the found station is not the one you desire, press
PTY SEEK START again. This unit resumes
searching for another station broadcasting the same
type of program.
If no station is received using the automatic preset
tuning method, “NOTHING” is displayed in the
front panel display for about 3 seconds and the
search ends.
PTY SEEK function
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
2
3
1
MODE
PTY SEEK
START
NEWS
Flashes
TUNING
hl
MODE
PTY SEEK
START
PTY HOLD
Lights up
18
TUNING
This function uses the EON data service on the Radio
Data System station network. If you select the desired
program type (NEWS, INFO, AFFAIRS or SPORT), this
unit automatically searches for all preset Radio Data
System stations that are scheduled to broadcast the
selected type of program and switches from the station
currently being received to the new station when the
broadcast starts.
This function can only be used when a Radio Data System station
that offers the EON data service is being received. When such a
station is being received, the EON indicator lights up in the front
panel display.
1 Check that the EON indicator is lit in the front
panel display.
If the EON indicator is not lit up, tune into another
Radio Data System station so that the EON indicator
lights up.
2 Press EON repeatedly to select the desired
program type (NEWS, INFO, AFFAIRS or
SPORT).
The selected program type name appears in the front
panel display.
To cancel this function, press EON repeatedly until
no program type name is shown in the front panel
display.
If a preset Radio Data System station type starts
broadcasting the selected type of program, the unit
automatically switches from the program being
received to that program (The EON indicator
flashes as a result).
When broadcasting of the selected program ends,
the unit returns to the previous station (or another
program on the same station).
EON function
Note
FREQ/TEXT
EON
MODE
PTY SEEK
START
FM/MW/LW EDIT
MAN'L/AUTO FM
MEMORY
TUNING MODE
TUNING
hl
POWER
A/B/C/D/E
23456781
AUTO/MA N'L
2
EON
NEWS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134

Yamaha TX-497 Manuale del proprietario

Categoria
Radio
Tipo
Manuale del proprietario