Yamaha M7CL Guida utente

Categoria
Controller DJ
Tipo
Guida utente

Questo manuale è adatto anche per

M7CL StageMix V6 User Guide
Welcome:
Thank you for downloading the “M7CL StageMix” iPad app for the Yamaha M7CL
digital mixing consoles. This version of StageMix is for use with M7CL firmware V3.5
and higher.
The latest firmware version for M7CL can be downloaded from
www.yamahaproaudio.com
StageMix is an application for the Apple iPad that provides remote control of Yamaha
M7CL digital mixing console functions via a simple, intuitive graphical interface from
anywhere within wireless range. The software has been specifically designed to
allow engineers to adjust monitor mixes from the performers’ positions on stage,
directly controlling mix parameters via the iPad rather than having to rely on verbal
directions to a second engineer. The result is better mixes in less time; a huge
advantage during high-pressure pre-show setup. Although StageMix is focused on
the requirements for adjusting monitor mixes on stage, its range of features is
continually expanding, allowing it to be used for a wider variety of remote control
functions.
Note: iOS applications may not be supported in your area. Please check with your
Yamaha dealer.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 2
CONTENTS
Page
1.0 System Requirements ................................................................................... 6
2.0 Wi-Fi Settings ................................................................................................. 6
3.0 Getting Started ............................................................................................... 7
3.1 M7CL Network Setup ................................................................................... 7
3.2 iPad Wi-Fi Settings ....................................................................................... 7
3.2.1 Using DHCP............................................................................................. 7
3.2.2 Using a Static IP Address ........................................................................ 8
3.3 StageMix Setup ............................................................................................ 9
3.3.1 OFFLINE DEMO .................................................................................... 10
3.3.2 Configure StageMix to Work with an M7CL Console ............................. 10
3.3.3 Select a Mixer and Begin Working ......................................................... 11
3.3.4 Edit Mixer Configurations ....................................................................... 12
4.0 Mixer Window ............................................................................................... 13
4.1 Channel Bank Navigation ........................................................................... 13
4.2 Channel Names and Colors ....................................................................... 13
4.3 Faders ........................................................................................................ 14
4.3.1 Long Faders ........................................................................................... 14
4.3.2 Navigation in Long Faders Mode ........................................................... 14
4.4 Channel ON ............................................................................................... 14
4.5 CUE ............................................................................................................ 15
4.6 Master Bank ............................................................................................... 16
4.7 HA GAIN .................................................................................................... 17
4.7.1 Input Port ............................................................................................... 17
4.7.2 Phantom Power ..................................................................................... 17
4.7.3 Phase ..................................................................................................... 18
4.8 SENDS ON FADERS ................................................................................. 19
4.8.1 Mix Send Levels ..................................................................................... 20
4.8.2 Mix Sends ON ........................................................................................ 20
4.8.3 Mix Send PRE/POST ............................................................................. 21
4.8.4 Global PRE/POST ................................................................................. 21
4.8.5 Stereo Mix Pan ...................................................................................... 21
4.9 DCA FADERS ............................................................................................ 22
5.0 EQ / PAN / DYNAMICS ................................................................................. 23
5.1 EQ .............................................................................................................. 23
5.1.1 EQ Curve in Mixer Window .................................................................... 23
5.1.2 Selecting PEQ or GEQ .......................................................................... 24
5.1.3 Accessing the EQ Editing Screens ........................................................ 24
5.2 PARAMETRIC EQ EDITING ...................................................................... 25
5.2.1 Gain and Frequency Lock ...................................................................... 26
5.2.2 HPF ........................................................................................................ 26
5.2.3 EQ Bands 1 & 4 ..................................................................................... 27
5.2.4 EQ ON ................................................................................................... 27
5.2.5 EQ RESET ............................................................................................. 27
5.2.6 EQ TYPE ............................................................................................... 28
5.2.7 PEQ COPY/PASTE ............................................................................... 28
5.2.8 RTA ON ................................................................................................. 28
5.2.9 RTA HOLD ............................................................................................. 28
5.3 GRAPHIC EQ EDITING ............................................................................. 29
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 3
5.3.1 Navigation in the GEQ Overview Section .............................................. 29
5.3.2 Rack Position ......................................................................................... 30
5.3.3 GEQ Type .............................................................................................. 30
5.3.4 RTA ON ................................................................................................. 30
5.3.5 RTA HOLD ............................................................................................. 30
5.3.6 GEQ FLAT ............................................................................................. 30
5.3.7 GEQ Copy/Paste ................................................................................... 30
5.3.8 GEQ ON ................................................................................................ 30
5.3.9 Editing GEQ Bands ................................................................................ 31
5.3.10 Navigation in the GEQ Editing Section .................................................. 31
5.4 PAN TO STEREO BUSSES ....................................................................... 32
5.4.1 Balance .................................................................................................. 32
5.5 DYNAMICS PROCESSORS ...................................................................... 33
5.6 DYNAMICS PROCESSOR EDITING ......................................................... 34
5.6.1 Default ................................................................................................... 34
5.6.2 Copy/Paste ............................................................................................ 34
5.6.3 Dynamics On ......................................................................................... 35
5.6.4 Dynamics Type ...................................................................................... 35
5.6.5 Threshold ............................................................................................... 35
5.6.6 Range and Ratio .................................................................................... 35
5.6.7 Other Dynamics Parameters .................................................................. 35
5.6.8 Key In ..................................................................................................... 36
6.0 OUTPORTS ................................................................................................... 37
6.1 Navigation .................................................................................................. 37
6.2 Output Port Identification ............................................................................ 37
6.3 Delay On .................................................................................................... 38
6.4 Delay Time Display .................................................................................... 38
6.5 Output Port Phase ...................................................................................... 38
6.6 Output Port Gain ........................................................................................ 38
6.7 Delay Time Editor ....................................................................................... 38
6.7.1 Delay Scale ............................................................................................ 39
6.7.2 Numeric Keypad .................................................................................... 39
6.7.3 Nudge Delay Time Values ..................................................................... 39
6.7.4 Copy Delay Time Value ......................................................................... 39
6.7.5 Paste Delay Time Value ........................................................................ 40
6.7.6 Close the Delay Time Editor .................................................................. 40
7.0 UTILITY ......................................................................................................... 41
7.1 MUTE GROUP MASTERS ......................................................................... 41
7.2 TAP TEMPO .............................................................................................. 42
7.2.1 Multi-Select ............................................................................................ 42
7.3 OSCILLATOR ............................................................................................ 43
7.3.1 Oscillator Assign .................................................................................... 43
7.3.2 Oscillator Output .................................................................................... 43
7.3.3 Oscillator Level Control .......................................................................... 43
7.3.4 Oscillator Frequency .............................................................................. 43
7.3.5 Oscillator Mode ...................................................................................... 43
8.0 EFFECT RACK .................................................................................................. 45
8.1 Rack Overview ........................................................................................... 45
8.1.1 Rack Patching ........................................................................................ 46
8.1.2 Accessing GEQ/FX Editor ...................................................................... 46
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 4
8.1.3 GEQ Editing ........................................................................................... 46
8.1.4 GEQ ON ................................................................................................ 46
8.1.5 Rack Metering ........................................................................................ 46
8.2 Effect Editing .............................................................................................. 47
8.2.1 Current Effect ......................................................................................... 47
8.2.2 Effect Type Selection ............................................................................. 47
8.2.3 Effect Library .......................................................................................... 47
8.2.4 Input and Output Patch Assignments ..................................................... 48
8.2.5 Input and Output Meters ........................................................................ 48
8.2.6 Effect Bypass ......................................................................................... 48
8.2.7 Effect Cue .............................................................................................. 48
8.2.8 Close Effect Editor ................................................................................. 48
8.2.9 Parameter Editing using Sliders ............................................................. 48
8.2.10 Numerical Parameter Editing ................................................................. 48
8.2.11 Multi-Segment Buttons ........................................................................... 49
8.2.12 Accessing Parameters ........................................................................... 49
8.2.13 Additional Parameters ............................................................................ 49
8.2.14 Wet/Dry Mix ........................................................................................... 49
8.3 GRAPHICAL EFFECT EDITING ................................................................ 50
8.3.1 REV-X Time/Level Parameters .............................................................. 51
8.3.2 REV-X Space Parameters ..................................................................... 52
8.3.3 REV-X Filter Parameters ....................................................................... 53
8.3.4 REVERB Time/Level Parameters .......................................................... 54
8.3.5 REVERB Space Parameters ................................................................. 55
8.3.6 REVERB Filter Parameters .................................................................... 56
8.3.7 REVERB Dynamics Parameters ............................................................ 56
8.3.8 STEREO REVERB Program .................................................................. 56
8.3.9 MONO/STEREO/MOD DELAY Parameters .......................................... 57
8.3.10 DELAY LCR Parameters ....................................................................... 58
8.3.11 ECHO Parameters ................................................................................. 58
9.0 SCENE MEMORY ......................................................................................... 59
9.1 CURRENT SCENE .................................................................................... 59
9.2 DECREMENT / INCREMENT SCENE ....................................................... 59
9.3 SCENE LIST .............................................................................................. 60
9.4 SCENE RANGE ......................................................................................... 60
9.5 SELECTED SCENE ................................................................................... 60
9.6 STORE SCENE .......................................................................................... 61
9.7 UNDO STORE ........................................................................................... 61
9.8 RECALL SCENE ........................................................................................ 61
9.9 UNDO RECALL .......................................................................................... 61
10.0 SETUP ........................................................................................................... 63
10.1 Fader Delay ................................................................................................ 63
10.2 Filled EQ Graph.......................................................................................... 63
10.3 Enable Inc/Dec Scene Recall ..................................................................... 63
10.4 Show Send Levels in Meter Bridge ............................................................ 64
10.5 Enable Phantom Power Switching ............................................................. 64
10.6 Set EQ band to 0dB with Double-Tap ........................................................ 64
10.7 Cue Mode ................................................................................................... 64
10.8 Show dB Markings on Mixer ....................................................................... 64
10.9 Set DCA to 0dB with Double-Tap ............................................................... 64
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 5
10.10 Channel Select StageMix Follows Console ......................................... 64
10.11 Channel Select Console Follows StageMix ......................................... 64
10.12 Input Meter Point .................................................................................... 64
10.13 Output Meter Point .................................................................................. 64
10.14 Display Key Input for Dynamics Meters .................................................. 65
10.15 RTA Peak Hold Mode ............................................................................. 65
10.16 RTA Input Gain ....................................................................................... 65
10.17 RTA Number of Bands ............................................................................ 65
11.0 Troubleshooting........................................................................................... 66
11.1 No Wi-Fi Available ...................................................................................... 66
11.2 Connection Error ........................................................................................ 66
11.3 Connection Lost ......................................................................................... 67
11.4 DHCP Server Setup on WAP/Router ......................................................... 67
11.5 “Redirect to Internet” Problem with iOS 6 or higher .................................... 67
11.6 Graphic EQ Doesn’t Affect the Sound ........................................................ 68
11.7 Problems Moving Multiple Faders .............................................................. 68
11.8 StageMix Facebook Page .......................................................................... 68
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 6
1.0 System Requirements
Apple iPad (any model using iOS 8 or higher)
Yamaha M7CL digital mixing console with V3.5 firmware or higher
Wi-Fi access point (802.11g, n or ac)
CAT5 cable (to connect the console to a Wi-Fi access point)
iOS: iOS 8.0 -9.x
2.0 Wi-Fi Settings
Configure the Wi-Fi access point, following the manufacturer’s instructions. No
special settings are needed, but using security such as WPA is highly recommended,
to prevent unwanted devices from joining the network. Here are some suggested
settings to assist less experienced Wi-Fi users:
1. Give the wireless network a name (this is the “SSID”).
2. Choose a security mode (such as WPA) and password.
3. Select the wireless mode (802.11g, n or ac).
Note: If the communication speed is too fast, StageMix may not be able to
connect to the M7CL. If this happens, try changing the network standard to
802.11g, for example, to reduce the communication speed.
4. In the case of “n”, select the wireless band (2.4 or 5GHz).
5. If available, enable “Auto Channel Selection” so the wireless channel with the
least interference will be selected.
Using a Wi-Fi access point with 2 or more external aerials is recommended to
increase potential signal range. Booster aerials could be connected for a further
increase in performance.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 7
3.0 Getting Started
3.1 M7CL Network Setup
Connect the Wi-Fi access point to the M7CL console’s network port via a
CAT5 cable. Note that a cross-over cable will be needed with older access
points that don’t have the “auto MDIX” function. Most recent devices will
support “auto MDIX”, in which case a straight CAT5 cable can be used.
Make sure your Ethernet cable is connected to a LAN port on your Wi-Fi
device and not the WAN port.
Note the IP address and MAC address of the M7CL console - they will need to
be entered into the iPad later. They can be found in the console as follows:
a. Press the [SETUP] button on the M7CL touchscreen
b. Press [NETWORK] on the M7CL touchscreen
3.2 iPad Wi-Fi Settings
The iPad can be configured using either DHCP or a Static IP address.
3.2.1 Using DHCP
Dynamic Host Configuration Protocol (DHCP) is a network protocol that
enables a server to automatically assign an IP address to a device.
Use the following steps to configure your iPad using DHCP.
a) Open the iPad “Settings” menu
b) Select “Wi-Fi”, and choose the correct network
c) Press the blue circle with the white arrow to the right of the selected
network to edit the IP address.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 8
d) Select [DHCP] and ensure that your iPad receives data for the IP
Address, Subnet Mask, Router and DNS.
e) Select [Renew Lease] if this data is not applied.
f) If the settings are successfully applied, press the iPad’s Home
button to exit the Settings menu.
Note:
Make sure that the subnet of the IP address is the same as that of
the M7CL console.
If DHCP settings are not applied after step (e), please check your
DHCP server settings (refer to 11.4 for further advice). Alternatively,
setup your iPad using a Static IP Address.
3.2.2 Using a Static IP Address
a) Open the iPad “Settings” menu
b) Select “Wi-Fi”, and choose the correct network
c) Press the blue circle with the white arrow to the right of the selected
network to edit the IP address.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 9
d) Select [Static]
e) IP Address: enter an IP Address similar to the one for the M7CL
console, but with just the last number different. (For example, if
M7CL is 192.168.0.128, give an address to the iPad such as
192.168.0.124).
f) Subnet Mask: enter “255.255.255.0”.
g) Router: enter the IP Address of your Wi-Fi Access Point (printed on
the bottom of the device or in the user’s manual)
h) DNS: enter the IP Address of your Wi-Fi Access Point (as in step g)
i) Press the iPad’s Home button to exit the Settings menu.
3.3 StageMix Setup
Launch the “M7CL StageMix” App
The “Select Mixer” screen will appear. From this screen, you can do any of
the following things:
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 10
Access the OFFLINE DEMO mode to explore the features and user
interface of M7CL StageMix.
Configure StageMix to work with an M7CL console.
Select an M7CL console that has already been configured to work with
your iPad and begin using StageMix.
3.3.1 OFFLINE DEMO
If [OFFLINE DEMO] is pressed in the “Select Mixer” screen, the
functions of StageMix will operate independently of any mixing console.
It is a useful way to demonstrate and learn how to use the app without
the need for a mixer. Level meters and most Scene Memory functions
do not work in this mode.
3.3.2 Configure StageMix to Work with an M7CL Console
i. Press [ADD MIXER] to open the following screen:
ii. Tap on the blank Name field and enter a name for your M7CL console
using the iPad’s onscreen keyboard.
iii. Enter the M7CL console’s IP address noted in 3.1. The default IP
Address may not need to be changed but confirm this in the Network
Setup screen of the M7CL console (refer to 3.1). If you need to modify
the IP Address in StageMix, make sure you include the dots between
the sets of numbers (as shown above).
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 11
iv. Enter the M7CL console’s MAC address noted in 3.1. When entering
the MAC Address, the colons between sets of characters will be
automatically added by StageMix.
v. Select the Model of M7CL console.
vi. Press the [ADD MIXER] button at the bottom of the screen.
3.3.3 Select a Mixer and Begin Working
If your iPad has been configured to work with an M7CL console, select
the mixer from the list and press [CONNECT]. (The model of mixer
(M7CL-48 or M7CL-32) will appear in smaller text below the mixer’s
name.)
The message “Syncing With M7CL…” will appear while StageMix is
obtaining parameters from the console. After this process is complete,
the Mixer window will appear and StageMix is ready to be used.
If you are using an 802.11n or 802.11ac Wi-Fi access point, you may
not be able to proceed beyond the “Syncing With M7CL…” display. If
this happens, change the LINK MODE parameter in the Network
settings from “100BASE-TX” to “10BASE-T” (see "M7CL Network
Setup”; section 3.1).
If StageMix cannot connect with your M7CL console, refer to the
Troubleshooting section (11.0) at the end of this document for possible
solutions.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 12
3.3.4 Edit Mixer Configurations
The parameters of a saved Mixer Configuration can be viewed and
edited by tapping the right arrow button next to a mixer’s name. This
will open the Edit Mixer screen which allows the Name, IP Address and
MAC Address to be verified and edited using the procedures described
in section 3.3.2. After editing, press [SAVE MIXER] to save any
changes.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 13
4.0 Mixer Window
The main page of the StageMix is called the “Mixer” window. It shows the EQ
curves, Pan positions, Dynamics status, CUE and ON buttons, faders, level
meters, and channel names and colors for eight adjacent channels.
Across the top of the screen, level meters and faders are displayed in blocks
of channels for mono Input Channels 1-48, Stereo Input Channels 1-4, Mix
and Matrix busses, and the Master Stereo and Mono busses. This is the
“Navigation/Meter Bridge”.
4.1 Channel Bank Navigation
Press any of the “Navigation/Meter Bridge” blocks to select the bank of
channels to be viewed and controlled in the channel strips below.
4.2 Channel Names and Colors
The name of each channel appears in StageMix as it does in the M7CL
console. The names are dimmed if the channel is switched off. A bar above
each channel name displays the color based on the channel type.
Double-tap on the channel name in the Mixer window to edit the name (colors
cannot be edited). Type in a name and press [return]. Alternatively, navigate
to another channel using the left/right cursor buttons above the keyboard.
This allows multiple channels to be named before closing the keyboard.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 14
4.3 Faders
Each fader has its channel number displayed on its cap. The fader cap must
be touched to allow the level to be adjusted. When a fader cap is touched, its
background will lighten and its current dB value will be displayed. Using the
iPad’s multi-touch facility, up to eight faders can be moved simultaneously.
Note: “Multitasking Gestures” must be turned Off in the iPad in order to allow
four or more faders to be adjusted simultaneously (refer to 11.7 for details).
4.3.1 Long Faders
Press the [LONG FADERS] button at the bottom-left corner of the Mixer
window to allow more accurate adjustment of fader levels. In this view,
EQ, Pan, Dynamics and the “Navigation/Meter Bridge” are not visible.
4.3.2 Navigation in Long Faders Mode
Although the “Navigation/Meter Bridge” is not visible in Long Faders
mode, it is possible to navigate up or down in banks of 8 channels
using the left/right arrow buttons in the upper left area of the Mixer
window.
Press the [LONG FADERS] button in the bottom-left corner again to
return to the Mixer Overview.
4.4 Channel ON
Press [ON] to change the on/off status of the channel. The button is green
when the channel is on. When a channel is off, its name and level meter will
dim and its fader position shown in the “Navigation/Meter Bridge” will also dim.
If a channel is muted as part of a Mute Group, the ON button will blink.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 15
4.5 CUE
The [CUE] buttons for each channel control the mixer’s Cue functions. Their
operation mode corresponds to the status of the Cue Mode in the Setup
screen (refer to 10.7).
When [LAST CUE] mode is active, only one channel can be cued at a time.
When [MIX CUE] mode is selected, multiple channels can be cued
simultaneously.
The [CUE CLEAR] button will cancel any cues that have been activated. This
is useful when there are multiple cues to cancel, and when some are hidden in
other layers.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 16
4.6 Master Bank
Pressing the [Master] block in the “Navigation/Meter Bridge” will cause
channels from the master section to appear in the fader strips. Included in this
block are the Stereo Master channel, Mono Master channel and the Monitor
Level and On control.
Note: there are two EQ thumbnails above the Stereo Master channel.
Parametric EQ is always linked for the left and right sides of the Stereo Master
channel. However it is possible to have independent GEQs assigned to the
left and right side of the Stereo Master.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 17
4.7 HA GAIN
The gain for each input channel can be controlled using the faders in
StageMix. Press the [HA GAIN] button in the lower left area of the Mixer
window to enter HA GAIN mode. This button will turn red and the background
behind the channel faders will become red to indicate that StageMix is in HA
Gain control mode.
Note: the [HA GAIN] button will only appear when a bank of Input Channels
are selected since there are no Gain parameters for Output Channels.
Faders can be moved to change the HA Gain for each channel. The gain
value of each head amp will be displayed above the fader while any fader cap
is being touched. Up to 8 faders can be adjusted simultaneously.
Faders will only appear for channels that have a head amp available.
4.7.1 Input Port
When HA GAIN mode is active, the input port assigned to each channel
will be displayed at the top of each channel strip (EQ, Pan and
Dynamics are not displayed when HA GAIN mode is active). Input Port
is a display-only parameter and cannot be edited from StageMix.
4.7.2 Phantom Power
The 48V phantom power status for each input channel is also displayed
at the top of each channel strip when HA GAIN mode is active. The
48V indicator will appear in red when phantom power is active.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 18
Phantom Power for each channel can be switched On or Off from
StageMix if the relevant preference is ON in the SETUP screen (refer to
10.5). Tap on the [48V] button and a confirmation popup will appear.
By default, the 48V phantom power indicators are display-only and
cannot be edited from StageMix.
4.7.3 Phase
The Phase setting for each input channel appears near the top of the
channel strips when HA GAIN mode is active. The Phase setting can
be edited from StageMix by pressing this button. The button will have a
grey background when the Phase setting is normal and will change to
an orange background when Phase is reversed.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 19
4.8 SENDS ON FADERS
Press the [SENDS ON FADERS] button in the left column of the Mixer screen
to access sends to Mix and Matrix Busses. In “SENDS ON FADERS” mode,
each fader controls the send level from its channel to the currently selected
Mix or Matrix Bus. The fader level indicators in the “Navigation/Meter Bridge”
will show the positions of all the Mix Send Levels if the appropriate Preference
is On in the Setup screen (refer to 10.4).
The large [MIX ON FADERS] button displays the currently selected Mix or
Matrix Bus number and its name. The color of this button matches those used
in the M7CL console.
[CUE] and [ON] buttons appear below the [SENDS ON FADERS] button,
allowing the currently active Mix Bus to be Cued and turned On/Off.
There are two ways to select a target Mix Bus:
a) Use a swipe gesture on the [MIX ON FADERS] button to
increment/decrement through the Mix and Matrix Busses.
b) Press the [MIX ON FADERS] button to access a popup screen which
allows direct selection of any Mix or Matrix Bus.
Yamaha Professional Audio M7CL StageMix V6 User Guide
Page 20
Select the Target from Mix 1-16 and Matrix 1-8. The currently selected Mix
will appear as a white button with a check mark. Stereo pairs appear as single
large buttons.
Notes:
When a Mix block is active in the “Navigation/Meter Bridge”, only Matrix
1-8 will be available in the “Select Target” popup.
When the Matrix block is selected in the “Navigation/Meter Bridge”, the
[SENDS ON FADERS] button is not available.
4.8.1 Mix Send Levels
When in “SENDS ON FADERS” mode, the fader in each channel strip
controls the level being sent from that channel to the currently selected
Mix or Matrix Bus.
Note: if a Mix Bus is set to “Fixed” mode, send levels to that Mix Bus
are fixed at 0dB and cannot be adjusted. Mix Send faders will not
appear when a Mix Bus set to “Fixed” mode is selected.
4.8.2 Mix Sends ON
In “SENDS ON FADERS” mode, the [ON] button in each channel strip
is used to turn On/Off the Mix Send from each channel to the currently
selected target Mix or Matrix Bus.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69

Yamaha M7CL Guida utente

Categoria
Controller DJ
Tipo
Guida utente
Questo manuale è adatto anche per