Yamaha TA2 Manuale del proprietario

Categoria
Pianoforti digitali
Tipo
Manuale del proprietario
IT
DE
KO
ES
FR
EN
TA2
Owners Manual
Mode d’emploi
Manual de instrucciones
Bedienungsanleitung
Manuale di istruzioni
툲󻼰튪찋튢
Before using the instrument, be sure to read “PRECAUTIONS” on pages 7-8.
Avant d’utiliser cet instrument, lisez attentivement la section « PRÉCAUTIONS D’USAGE » aux pages 7-8.
Antes de utilizar el instrumento, lea la sección “PRECAUCIONES, en las páginas 7-8.
Achten Sie darauf, vor Einsatz dieses Instruments die „VORSICHTSMASSNAHMEN“ auf Seiten 7-8 durchzulesen.
Prima di utilizzare lo strumento, assicurarsi di leggere la sezione “PRECAUZIONI”, alle pagine 7 - 8.
훋뾶쬂툲󻼰뾶󼂋흖ˊ󻿻󼉇󻿟훎󼂋󼆃󻿟툲󻿋삳󼀄󻿃푳푢힪
TM
2
TA2 Owner’s Manual
SPECIAL MESSAGE SECTION (U.S.A)
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics shown
below or molded/stamped facsimiles of these graphics on the
enclosure. The explanation of these graphics appears on this
page. Please observe all cautions indicated on this page and
those indicated in the safety instruction section.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the equilat-
eral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the prod-
uct.
The lightning flash with arrowhead sym-
bol, within the equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic products are
tested and approved by an independent safety testing labora-
tory in order that you may be sure that when it is properly
installed and used in its normal and customary manner, all
foreseeable risks have been eliminated. DO NOT modify this
unit or commission others to do so unless specifically autho-
rized by Yamaha. Product performance and/or safety standards
may be diminished. Claims filed under the expressed warranty
may be denied if the unit is/has been modified. Implied warran-
ties may also be affected.
SPECIFICATIONS SUBJECT TO CHANGE: The infor-
mation contained in this manual is believed to be correct at the
time of printing. However, Yamaha reserves the right to change
or modify any of the specifications without notice or obligation
to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to produce
products that are both user safe and environmentally friendly.
We sincerely believe that our products and the production
methods used to produce them, meet these goals. In keeping
with both the letter and the spirit of the law, we want you to be
aware of the following:
Battery Notice: This product MAY contain a small non-
rechargeable battery which (if applicable) is soldered in place.
The average life span of this type of battery is approximately
five years. When replacement becomes necessary, contact a
qualified service representative to perform the replacement.
Warning: Do not attempt to recharge, disassemble, or inciner-
ate this type of battery. Keep all batteries away from children.
Dispose of used batteries promptly and as regulated by applica-
ble laws. Note: In some areas, the servicer is required by law to
return the defective parts. However, you do have the option of
having the servicer dispose of these parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is con-
sidered to be at an end, please observe all local, state,
and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of knowledge
relating to how a function or effect works (when the unit is
operating as designed) are not covered by the manufacturer’s
warranty, and are therefore the owners responsibility. Please
study this manual carefully and consult your dealer before
requesting service.
NAME PLATE LOCATION: The graphic below indicates
the location of the name plate. The model number, serial num-
ber, power requirements, etc., are located on this plate. You
should record the model number, serial number, and the date of
purchase in the spaces provided below and retain this manual
as a permanent record of your purchase.
Model
Serial No.
Purchase Date
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
92-469- 1 (bottom)
3
TA2 Owners Manual
IMPORTANT SAFETY
INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufac-
turer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table speci-
fied by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the appara-
tus, the apparatus has been exposed to rain or moisture, does not operate nor-
mally, or has been dropped.
15 This product shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on the apparatus.
16 Do not put burning items, such as candles, on the apparatus.
17 Do not place this product or any other objects on the power cord or place it in a
position where anyone could walk on, trip over, or roll anything over power or
connecting cords of any kind. The use of an extension cord is not recom-
mended! If you must use an extension cord, the minimum wire size for a 25’
cord (or less) is 18 AWG. NOTE: The smaller the AWG number, the larger the
current handling capacity. For longer extension cords, consult a local electri-
cian.
18 WARNING — To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
19 Care should be taken that objects do not fall and liquids are not spilled into the
enclosure through any openings that may exist.
20 This product, either alone or in combination with an amplifier and headphones
or speaker/s, may be capable of producing sound levels that could cause per-
manent hearing loss. DO NOT operate for a long period of time at a high volume
level or at a level that is uncomfortable. If you experience any hearing loss or
ringing in the ears, you should consult an audiologist. IMPORTANT: The louder
the sound, the shorter the time period before damage occurs.
21 Some Yamaha products may have benches and/or accessory mounting fixtures
that are either supplied as a part or the product or as optional accessories.
Some of these items are designed to be dealer assembled or installed. Please
make sure that benches are stable and any optional fixtures (where applicable)
are well secured BEFORE using. Benches supplied by Yamaha are designed for
seating only. No other uses are recommended.
22 Make sure that the plug of the power cable can easily be disconnected from the
AC outlet as a measure of precaution.
PRÉCAUTIONS CONCER-
NANT LA SÉCURITÉ
1 Lire ces instructions.
2 Conserver ces instructions.
3 Tenir compte de tous les avertissements.
4 Suivre toutes les instructions.
5 Ne pas utiliser ce produit à proximité d’eau.
6 Nettoyer uniquement avec un chiffon propre et sec.
7 Ne pas bloquer les orifices de ventilation. Installer l’appareil conformément aux instruc-
tions du fabricant.
8 Ne pas installer l’appareil à proximité d’une source de chaleur comme un radiateur, une
bouche de chaleur, un poêle ou tout autre appareil (y compris un amplificateur) produi-
sant de la chaleur.
9 Ne pas modifier le système de sécurité de la fiche polarisée ou de la fiche de terre. Une
fiche polarisée dispose de deux broches dont une est plus large que l’autre. Une fiche de
terre dispose de deux broches et d’une troisième pour le raccordement à la terre. Cette
broche plus large ou cette troisième broche est destinée à assurer la sécurité de l’utilisa-
teur. Si la fiche équipant l’appareil n’est pas compatible avec les prises de courant dispo-
nibles, faire remplacer les prises par un électricien.
10 Acheminer les cordons d’alimentation de sorte qu’ils ne soient pas piétinés ni coincés,
en faisant tout spécialement attention aux fiches, prises de courant et au point de sortie
de l’appareil.
11 Utiliser exclusivement les fixations et accessoires spécifiés par le fabricant.
12 Utiliser exclusivement le chariot, le stand, le trépied, le support ou
la table recommandés par le fabricant ou vendus avec cet appareil.
Si l’appareil est posé sur un chariot, déplacer le chariot avec pré-
caution pour éviter tout risque de chute et de blessure.
13 Débrancher l’appareil en cas d’orage ou lorsqu’il doit rester hors
service pendant une période prolongée.
14 Confier toute réparation à un personnel qualifié. Faire réparer
l’appareil s’il a subi tout dommage, par exemple si la fiche ou le cordon d’alimentation
est endommagé, si du liquide a coulé ou des objets sont tombés à l’intérieur de l’appa-
reil, si l’appareil a été exposé à la pluie ou à de l’humidité, si l’appareil ne fonctionne pas
normalement ou est tombé.
15 Ce produit ne doit pas être exposé à un suintement ou des éclaboussures et aucun objet
rempli de liquide, tels que des vases, ne doit être mis sur l’appareil.
16 Ne mettez pas des articles brûlants, tels que des bougies, sur l’appareil.
17 Ne placez ce produit ni aucun autre objet sur le cordon d’alimentation secteur ou ne le
placez pas dans une position où n’importe qui pourrait marcher dessus, trébucher
dedans ou faire rouler n’importe quoi sur les cordons d’alimentation en aucune manière.
L’utilisation d’un cordon prolongateur n’est pas recommandée ! Si vous devez utiliser un
cordon prolongateur, la taille minimum du caliber de fil du cordon pour un cordon de 25
pouces (ou moins) est de 18 du calibrage américain normalisé. REMARQUE: Plus le
numéro du calibrage américain normalisé est petit, plus la capacité de gestion de l’inten-
sité est grande. Pour de plus longs cordons prolongateurs, consultez un électricien
local.
18 AVERTISSEMENT — Pour réduire les risques d’incendie ou de décharge électrique,
n’exposez pas cet appareil à la pluie ou à l’humidité.
19 Un soin tout particulier devrait être pris pour qu’aucun objet ne tombe et que des
liquides ne soient renversés dans l’encoffrement par aucune des ouvertures qui peuvent
exister.
20 Ce produit, individuel ou en combinaison avec un amplificateur et des écouteurs ou le
ou les hautparleurs, risque de produire des niveaux sonores qui pourraient causer une
perte d’auditive permanente. NE PAS mettre en service pendant une longue période à un
niveau de volume élevé ou à un niveau qui est inconfortable. Si vous éprouvez n’importe
quelle sorte de perte auditive ou de sonnerie dans les oreilles, vous devriez consulter un
audiologiste. IMPORTANT: Plus le son est fort, plus la période de temps avant que les
dégâts se produisent est courte.
21 Certains produits Yamaha peuvent avoir des supports et/ou des accessoires d’installa-
tion complémentaires qui sont fournis comme partie du produit ou en tant qu’acces-
soires optionnels. Certains de ces articles sont conçus pour être montés ou installés
par le distributeur. Veuillez vous assurer que les supports sont stables et que tous les
accessoires optionnels (quand ceci est applicable) sont bien fixés AVANT l’utilisation.
Les supports fournis par Yamaha sont conçus pour un positionnement seulement.
Aucune autre utilisation n’est recommandée.
22 Assurez-vous que la prise du cordon d’alimentation électrique peut facilement être
débranchée de la prise de sortie secteur comme mesure de précaution.
Explanation of Graphical Symbols
Explication des symboles
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.
L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné
à attirer l’attention de l’utilisateur sur la présence d’une « tension dange-
reuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment
élevée pour constituer un risque d’électrocution.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servic-
ing) instructions in the literature accompanying the product.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné
à attirer l’attention de l’utilisateur sur la présence d’instructions impor-
tantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la
documentation fournie.
The above warning is located on the bottom of the unit.
L’avertissement ci-dessus est situé sur le dessous de l’unité.
4
TA2 Owner’s Manual
* This applies only to products distributed by Yamaha Corporation of America.
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party: Yamaha Corporation of America
Address: 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone: 714-522-9011
Type of Equipment: TransAcoustic Piano
Model Name: GC1MTA2, C1XTA2, C3XTA2, U1TA2, U3TA2, U3STA2, YU11TA2,
YU33TA2, YUS1TA2, YUS3TA2, YUS3STA2, YUS5TA2
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause undesired operation.
See user manual instructions if interference to radio reception is suspected.
(FCC DoC)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifica-
tions not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could
void your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these require-
ments provides a reasonable level of assurance that your
use of this product in a residential environment will not result
in harmful interference with other electronic devices. This
equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the opera-
tion of other electronic devices. Compliance with FCC regula-
tions does not guarantee that interference will not occur in all
installations. If this product is found to be the source of inter-
ference, which can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the problem by using one of
the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to distrib-
ute this type of product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation of America,
Electronic Service Division, 6600 Orangethorpe Ave, Buena
Park, CA90620
The above statements apply ONLY to those products distrib-
uted by Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by Yamaha Corporation of America. (class B)
FCC INFORMATION (U.S.A.)
5
TA2 Owners Manual
English
Table of Contents
PRECAUTIONS...........................................................7
NOTICE ........................................................................9
About the Manuals ....................................................10
Included Accessories .................................................10
Features........................................................................11
Chapter 1 Getting Started ................... 12
Part names and functions .........................................12
Turning the power on/off .........................................15
Using headphones......................................................16
Chapter 2 Playing the TransAcoustic™
Piano................................... 17
Playing with digital sound (TransAcoustic mode) 18
Layering the digital sound with the acoustic piano
sound (Layer mode)...................................................19
Playing the sound muted (Silent Piano mode) ......20
Selecting Voices..........................................................21
Chapter 3 Playing Back and Recording
Songs................................... 23
Playing back Songs.....................................................23
Recording your performance ...................................27
Handling User Song files...........................................30
Chapter 4 Using Convenient Functions
(UTILITY) .......................... 33
Using the metronome................................................33
Enhancing the sound with Reverb...........................35
Customizing with the various Function parameters
(Function settings).....................................................37
Chapter 5 Connecting to Other Devices
............................................. 49
Connecting USB devices...........................................49
Connecting to external audio devices ..................... 51
Connecting to external MIDI devices.....................53
Connecting to a computer/smart device ................54
Chapter 6 Using Other Functions....... 58
Backup data and initialization..................................58
Setting the Character Code for file names..............59
Chapter 7 Appendix ............................ 60
Message List................................................................60
Troubleshooting.........................................................62
Voice List.....................................................................64
Song List......................................................................66
Playback sequence of Song files in a USB flash drive
......................................................................................68
Specifications..............................................................69
Index ............................................................................71
TA2
Owners Manual
6
TA2 Owner’s Manual
(weee_eu_en_02)
Information for users on collection and disposal of old equipment:
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should
not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your
national legislation.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human
health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service
or the point of sale where you purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
The model number, serial number, power requirements, etc., may be
found on or near the name plate, which is at the bottom of the unit.
You should note this serial number in the space provided below and
retain this manual as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
(bottom_en_01)
The name plate is located on the bottom of the unit.
7
TA2 Owners Manual
English
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
• Do not place the power cord near heat sources such as heaters or
radiators. Also, do not excessively bend or otherwise damage the
cord, or place heavy objects on it.
• Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
• Use only the supplied power cord/plug.
• Check the electric plug periodically and remove any dirt or dust
which may have accumulated on it.
• Unplug the power cord from the AC outlet when cleaning the
instrument.
This instrument contains no user-serviceable parts. Do not open the
instrument or attempt to disassemble or modify the internal
components in any way. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
• Radio waves may affect electro-medical devices.
- Do not use this product near medical devices or inside areas in
which the use of radio waves is restricted.
- Do not use this product within 15cm (6 in.) of persons with a heart
pacemaker implant.
Do not expose the instrument to rain, use it near water or in damp or
wet conditions, or place on it any containers (such as vases, bottles
or glasses) containing liquids which might spill into any openings.
If any liquid such as water seeps into the instrument, turn off the
power immediately and unplug the power cord from the AC outlet.
Then have the instrument inspected by qualified Yamaha service
personnel.
• Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
When one of the following problems occur, immediately turn off the
power switch and disconnect the electric plug from the outlet. Then
have the device inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
Power supply/Power cord
Do not open
Location
Water warning
Fire warning
If you notice any abnormality
DMI-5 1/2
8
TA2 Owner’s Manual
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a
multiple-connector. Doing so can result in lower sound quality, or
possibly cause overheating in the outlet.
• When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord can
damage it.
• Remove the electric plug from the outlet when the instrument is not
to be used for extended periods of time, or during electrical storms.
• Do not place the instrument in an unstable position where it might
accidentally fall over.
• Before moving the instrument, remove all connected cables, to
prevent damage to the cables or injury to anyone who might trip
over them.
• When moving the instrument, be careful to avoid catching your
hands or feet on the instrument.
• Move the instrument slowly with extra care to keep the instrument
from falling over, or bumping against the surroundings. We
recommend that you consult a qualified carrier to transport or move
the instrument.
• When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from
the outlet. Even when the power switch is turned off, electricity is
still flowing to the product at the minimum level. When you are not
using the product for a long time, make sure to unplug the power
cord from the wall AC outlet.
• Before connecting the instrument to other electronic components,
turn off the power for all components. Before turning the power on
or off for all components, set all volume levels to minimum.
• Be sure to set the volumes of all components at their minimum
levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.
• Do not insert a finger or hand in any gaps on the fallboard or
instrument. Also take care that the fallboard does not pinch your
finger.
Never insert or drop paper, metallic, or other objects into the gaps or
opening on the main unit, fallboard, or keyboard. This could cause
physical injury to you or others, damage to the instrument or other
property, or operational failure.
• Do not rest your weight on, or place heavy objects on the
instrument, and do not use excessive force on the buttons, switches
or connectors.
Do not use the instrument/device or headphones for a long period of
time at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or
ringing in the ears, consult a physician.
• Close the fallboard when the instrument is not in use. Hold the
fallboard with both hands when opening or closing it. Be careful to
avoid catching fingers (yours or others) between the fallboard and
the main unit.
Do not go near the instrument during an earthquake. Strong shaking
during an earthquake could cause the instrument to move or tip
over, resulting in damage to the instrument or its parts, and possibly
causing injury.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
Power supply/Power cord
Location
Connections
Handling caution
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
DMI-5 2/2
9
TA2 Owners Manual
English
NOTICE
To avoid the possibility of malfunction/ damage to
the product, damage to data, or damage to other
property, follow the notices below.
Handling
• Do not connect this product to public Wi-Fi and/or
Internet directly. Only connect this product to the
Internet through a router with strong password-
protections. Consult your router manufacturer for
information on security best practices.
• Do not use the instrument in the vicinity of a TV, radio,
stereo equipment, mobile phone, or other electric
devices. Otherwise, the instrument, TV, or radio may
generate noise. When you use the instrument along with
a smart device, such as an iPhone, iPad, etc., we
recommend that you set that devices “Airplane Mode” to
on and then the Wi-Fi/Bluetooth setting to on in order
to avoid noise caused by communication.
• Do not expose the instrument to excessive dust or
vibrations, or extreme cold or heat (such as in direct
sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration, damage to
the internal components or unstable operation.
• Do not place vinyl, plastic or rubber objects on the
instrument, since this might discolor the panel or
keyboard.
• Bumping the surface of the instrument with metal,
porcelain, or other hard objects can cause the finish to
crack or peel. Use caution.
• Do not drag the instrument when moving it. Doing so
may damage the floor.
Maintenance
• When cleaning the instrument, use a soft and dry cloth.
Do not use paint thinners, solvents, alcohol, cleaning
fluids, or chemical-impregnated wiping cloths.
• Gently remove dust and dirt with a soft cloth. Do not
wipe too hard since small particles of dirt can scratch the
instruments finish.
• During extreme changes in temperature or humidity,
condensation may occur and water may collect on the
surface of the instrument. If water is left, the wooden
parts may absorb the water and be damaged. Make sure
to wipe any water off immediately with a soft cloth.
Saving data
• The MIDI Song recorded to this instrument (page 27)
are retained when the power is turned off. However, the
saved data may be lost due to some failure, an operation
mistake, etc. Save your important data onto an external
device such as a computer (page 54).
• To protect against data loss through USB flash drive
damage, we recommend that you save your important
data onto spare USB flash drive or an external device
such as a computer as backup data.
Information
About copyrights
• Copying of the commercially available musical data
including but not limited to MIDI data and/or audio
data is strictly prohibited except for your personal use.
• This product incorporates and bundles contents in
which Yamaha owns copyrights or with respect to which
Yamaha has license to use others' copyrights. Due to
copyright laws and other relevant laws, you are NOT
allowed to distribute media in which these contents are
saved or recorded and remain virtually the same or very
similar to those in the product.
* The contents described above include a computer
program, Accompaniment Style data, MIDI data, WAVE
data, voice recording data, a score, score data, etc.
* You are allowed to distribute medium in which your
performance or music production using these contents
is recorded, and the permission of Yamaha
Corporation is not required in such cases.
About functions/data bundled with
the instrument
• Some of the preset songs have been edited for length or
arrangement, and may not be exactly the same as the
original.
About this manual
• The illustrations as shown in this manual are for
instructional purposes only, and may appear somewhat
different from those on your instrument.
• Windows is a registered trademark of Microsoft®
Corporation in the United States and other countries.
• iPhone, iPad and iPod touch are trademarks of Apple
Inc., registered in the U.S. and other countries.
• Android™ is a trademark of Google Inc.
• The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Yamaha Corporation is under license.
• The company names and product names in this manual
are the trademarks or registered trademarks of their
respective companies.
About Bluetooth communications
The 2.4 GHz band used by Bluetooth compatible devices
is a radio band shared by many types of equipment.
While Bluetooth compatible devices use a technology
minimizing the influence of other components using the
same radio band, such influence may reduce the speed
or distance of communications and in some cases
interrupt communications.
• The speed of signal transfer and the distance at which
communication is possible differs according to the
distance between the communicating devices, the
presence of obstacles, radio wave conditions and the
type of equipment.
• Yamaha does not guarantee all wireless connections
between this unit and devices compatible with Bluetooth
function.
10
TA2 Owner’s Manual
Thank you for choosing the Yamaha TransAcoustic™ Piano. This instrument is equipped with the same
keyboard mechanisms as an acoustic piano. However, you can play with the volume adjusted, and use various
functions not available on an acoustic piano, such as changing Voices or recording your performance. This
manual mainly explains these functions as a TransAcoustic Piano. In order to make the most of the
performance potential and features of the instrument, please read the manuals thoroughly, and keep them in a
handy place for later reference.
About the Manuals
This instrument has the following documents and instructional materials.
Included Documents
Owner’s Manual (this book)
This manual mainly describes how to use
the particular functions for the
TransAcoustic Piano. For information on
handling as an acoustic piano, refer to the
separate manual for the piano.
Online Materials (downloadable
from the website)
Smart Device Connection Manual
(only in English, French, German
and Spanish)
Explains how to connect the instrument to a
smartphone or tablet, etc. You can choose
from two versions (iOS and Android)
depending on your device.
Computer-related Operations
Includes instructions on connecting this
instrument to a computer, and operations
related to transferring data.
MIDI Reference
Contains MIDI related information.
To obtain these manuals, access the Yamaha Downloads, enter the model name for searching the desired files.
Included Accessories
Owner’s Manual (this book) x 1
•Headphones x 1
•Headphone hanger x 1
Attachment screws for headphone hanger x 2
“50 Classical Music Masterpieces” music book
x 1
Yamaha Downloads
http://download.yamaha.com/
11
TA2 Owners Manual
English
Features
• A real acoustic piano that lets you freely change the volume or Voice as you want
Yamahas innovative TransAcoustic technology lets you adjust the volume or change the Voiceswithout
affecting your performance at all, just as when playing an acoustic piano (TransAcoustic mode). The
instrument also features the Silent Piano mode in which you can play silently while listening to the sound
from the headphones.
You can take advantage of these functions and get more enjoyment with the piano, such as playing in a lower
volume to enjoy with people near you, or in silence to concentrate on practice, or playing with various Voices.
• Natural expressive feel possible only with an acoustic piano
In the TransAcoustic mode, TransAcoustic technology vibrates the entire soundboard and causes resonance of
the strings and the piano body allowing you to enjoy playing with an exceptionally natural acoustic feel.
Even in the Silent Piano mode, advanced technologies such as Binaural Sampling gives you the impression of
the sound as if it was actually emanating from the piano when listening through headphones.
• Realistic resonance enhances your performance
This instrument puts the sound of 20 luxurious, authentic Voices at your fingertips. These include Yamahas
flagship CFX piano—which delivers dynamic sound, from a brilliant high-range to powerful bass—and the
Bösendorfer* Imperial, a world-class piano renowned for its subtle and warm sound.
In the TransAcoustic mode, the resonance of the strings and the piano body lets you enjoy the rich ambience
even when playing with the built-in Voices.
* Bösendorfer is a subsidiary company of Yamaha.
• Real acoustic piano touch for maximum expressiveness
Naturally, since this is an actual acoustic piano, it is exceptionally expressive. Moreover, the sensors which
detect the movement of the keys are non-contact optical sensors, so they do not affect the playing touch. They
catch keystroke information precisely, enabling you to perform with rich nuance and extraordinarily subtle
expression.
• Elegant, integrated design
The control unit has been given a graceful design that unobtrusively blends with the piano itself. Moreover, the
simple controllers allow you to operate the instrument easily.
• Playback and recording functions for enjoying music anytime
You can record your performance to this instrument and a USB flash drive, and improve your performance by
listening back to the recording.
This instrument also features a Bluetooth audio function, which allows you to play along on this instrument
with audio from a Bluetooth-equipped device, and even record the audio as an audio Song.
Smart Device App “Smart Pianist”
The smart device app “Smart Pianist” (available as a free download) enables you to use the functions such
as selecting Voices, controlling the metronome intuitively with the visualized interface, or display the score
on your smart device.
For information about this app, access the following web page:
https://www.yamaha.com/kbdapps/
The connection wizard of the Smart Pianist helps you to connect this unit to your smart device properly. To
start connection wizard, tap [ ] (Menu) located upper left on the Smart Pianist screen to open the menu,
then tap “Instrument” followed by “Start Connection Wizard.
12
Chapter
TA2 Owner’s Manual
1 Getting Started
Part names and functions
Piano
Silencing lever
Activates the TransAcoustic mode/Silent Piano mode (pages 18, 20).
Pedals
Soft pedal
Reduces the volume and slightly changes the
timbre of the notes. The notes played before
this pedal is pressed are not affected.
Silencing pedal (for models not equipped
with a sostenuto pedal)
Activates the TransAcoustic mode/Silent Piano
mode by pressing and sliding to the left
(pages 18, 20).
Sostenuto pedal (for models equipped with a
sostenuto pedal)
Sustains the notes that are being played at that
time even after you release the keys.
Subsequently played notes are not affected.
Damper pedal
Sustains notes even after you release the keys.
When in the Silent Piano mode and a piano
Voice is selected, pressing this pedal
reproduces the complicated interaction of both
strings and soundboard resonance by the VRM
technology (page 44), and makes the sound
more like a real acoustic piano.
The damper pedal features an expressive half-
pedal function, and allows you to set the degree
to which pressing the damper pedal applies the
half-pedal effect (page43) when in the
TransAcoustic mode/Layer mode/Silent Piano
mode.
1
1
Control unit
(page 13)
Control unit
(page 13)
Upright piano Grand piano
(for models
equipped with a
sostenuto pedal)
1
1 2 3
1 2 3
Upright piano Grand piano
1
2
3
13
English
TA2 Owners Manual
Control unit
[PHONES] jacks
For connecting a pair of headphones with
stereo mini plug (page 16). Up to two
headphones can be connected.
USB [TO DEVICE] terminal
For connecting a USB flash drive or an optional
USB wireless LAN adaptor (page 49).
[Aco.] lamp (only for grand pianos)
When the lamp is lit, the acoustic piano sound
is produced (page 17).
[TA] lamp
This lamp lights to indicate that the instrument
is in the TransAcoustic mode or Layer mode
and the digital sound is output from the
soundboard (page 18).
[] (Standby/On) switch
For turning the power on or setting to standby
(page 15).
Menu button
Each time you press this button, VOICE,
SONG or UTILITY is selected and its lamp
lights up in orange.
•VOICE
For controlling the Voice (page 21).
•SONG
For recording your performance or playing
back preset Songs, recorded Songs, etc.
(page 23).
•UTILITY
For setting various convenient functions, such
as the metronome (page 33).
Button 1, Button 2, Button 3
Depending on what you selected from VOICE/
SONG/UTILITY by using the Menu button,
different functions are assigned and can be
controlled by pressing each button.
Front panel
Bottom panel
These buttons (and switch) are
pressed upward from the bottom.
(only for grand pianos)
1
2
3
4
5
6
7
8 9
14
TA2 Owner’s Manual
(Bluetooth) lamp
Lights up when the Bluetooth function is on
(page57). It lights up in blue when the
instrument is connected with a Bluetooth-
equipped device, and it lights up in white when
no Bluetooth-equipped device is connected
and while in the UTILITY.
Display
Indicates various setting values, such as Voice
number, Song number and other parameter
values.
It also indicates various messages with the
three characters (page 60).
[VOICE/VALUE] control
Rotating this allows you to select desired Voices
or adjust the setting values. Depending on
particular functions, you may need to press this
to control the function.
[VOLUME] control
For adjusting the volume of the entire sound
when in the TransAcoustic mode/Layer mode,
and the output sound via the [PHONES] jack,
AUX OUT jacks, USB [TO HOST] terminal or
Bluetooth.
(Only grand pianos) Pressing the control can
turn the acoustic piano sound on/off (page 17).
AUX OUT [R]/[L/L+R] jacks
For connecting an external audio device and
output the sound of this unit to the device
(page 51).
MIDI [IN]/[OUT] terminals
For connecting an external MIDI device
(page 53).
[DC IN 16V] jack
(For qualified Yamaha personnel only.) This
connects to the power cord. The plug is already
connected when the instrument is shipped.
[SENSOR] jack/ [MD/AMP] jack
(For qualified Yamaha personnel only.) These
connect to the sensor and to the internal unit.
The plugs are already connected when the
instrument is shipped.
[AUX IN] jack
For connecting an audio device such as a
portable music player and input the sound to
this unit (page 52).
USB [TO HOST] jack
For connecting to a computer or a smart device
(page 54).
10
11
Song number Parameter value
12
13
14
15
16
17
18
19
15
English
TA2 Owners Manual
Turning the power on/off
CAUTION
Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you
are not using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug
from the wall AC outlet.
1
Connect the plug of the power cord into the proper AC outlet on the wall.
WARNING
Use only the AC power cord supplied with your instrument. If the supplied cord is lost or damaged and needs
to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and
shock hazard!
CAUTION
When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble
or malfunction occurs, immediately turn the power off and disconnect the plug from the outlet.
NOTE
When disconnecting the plug from the AC outlet, first turn the power off, and then disconnect the plug.
When you are not using the power cord, bundle it using the band.
2
Press the [] (Standby/On) switch to turn the
power on.
The [ ] (Standby/On) lamp lights up.
To turn the power off, press the switch again.
NOTE
The sound will not be properly output if a key was pressed when the power was turned on. Do not touch any keys
when turning the power on.
Upright piano
Grand piano
The shape of the plug and outlet differ depending on your locale.
16
TA2 Owner’s Manual
Using headphones
Connect a pair of headphones to the [PHONES] jack. Since this
instrument is equipped with two [PHONES] jacks, you can connect
two pairs of headphones. If you are using only one pair, insert the
plug into either of these jacks.
Even when listening through headphones, you can enjoy
exceptionally realistic, natural sound by Yamahas advanced
technologies, Binaural Sampling and Stereophonic Optimizer. For
details, refer to page 22.
CAUTION
Do not use the headphones for a long period of time at a high or
uncomfortable volume level, since this can cause permanent hearing
loss.
Be careful not to catch your foot on the headphone cord.
NOTICE
Do not pull the cord of the headphones or apply excessive force on the plug. This can damage the headphones and
result in sound degradation.
NOTE
When you connect headphones, the Silent Piano mode (page 20) is activated. If you want to play in the TransAcoustic mode/
Layer mode, disconnect the headphones.
Attaching the headphone hanger
Attach the headphone hanger to the bottom of the control unit with
the supplied two screws.
NOTICE
Do not hang anything other than the headphones on the hanger.
Otherwise, the instrument or the hanger may be damaged.
Auto Power Off function
To prevent unnecessary power consumption, this unit features an Auto Power Off function that
automatically turns the power off if the instrument is not operated for 30 minutes.
NOTICE
When the instrument is communicating with other devices or the Songs are played back, the power will not be
turned off automatically. Make sure to turn off the power by pressing the [] (Standby/On) switch when the
instrument is not in use.
Disabling Auto Power Off
Turn the power on while holding down the
lowest key (A-1). “PoF” appears on the display
and the unit starts up with the Auto Power Off
function disabled.
To turn the Auto Power Off function on or off
while the power is on, refer to page 47.
Lowest key (A-1)
Phone plug
(stereo mini)
Phillips-head (+) screwdriver
17
Chapter
English
TA2 Owners Manual
2 Playing the TransAcoustic™ Piano
This instrument can be played as a normal acoustic piano, and you can also use the following three modes
depending on the situations. In these modes, you can use the various functions such as playing preset Voices
built into unit and recording your performances.
TransAcoustic mode: You can play with the digital sound and hear it through resonance of the soundboard
of the piano by the TransAcoustic technology (page 18).
Layer mode: You can play with the digital sound as well as the acoustic piano sound (page 19).
Silent Piano mode: You can play with the sound muted and listen to the digital sound through the
headphones (page 20).
TransAcoustic technology
On acoustic pianos, as you play the keyboards, the hammers strike the strings and then the vibration is transmitted to the
soundboard to emit the sound. On the other hand, on this TransAcoustic piano, the tone generator sends audio signals to a
transducer that converts the signals to vibrations and transmits them to the soundboard. The sound resonating from the
soundboard is just like that on acoustic pianos. The TransAcoustic technology allows you to adjust the volume, while the
natural and rich resonance characteristic of acoustic pianos are maintained.
Playing as an acoustic piano
If you want to play as a normal acoustic piano, you do not need to turn on the power to the instrument.
For upright pianos:
Turn the power off, and pull the silencing lever forward to return it to the back position, or press the center
pedal to slide it to the right, allowing you to play it as an acoustic piano.
For grand pianos:
You can switch the instrument to play as an acoustic piano while the power is on. Pressing the [VOLUME]
control lights up the [Aco.] lamp and enables you to play as an acoustic piano. When the control is pressed,
the Voice is automatically set to “---” (Off).
Pressing the [VOLUME] control again switches the instrument to the TransAcoustic mode.
NOTE
If you select a Voice other than “---” (Off), both the [Aco.] and [TA] lamps light up indicating that the instrument is in the
Layer mode (page 19).
With sostenuto pedal No sostenuto pedal
Lights up
18
TA2 Owner’s Manual
Playing with digital sound (TransAcoustic mode)
You can play with the digital sound and hear it through resonance of the soundboard of the piano by the
TransAcoustic technology. The acoustic piano sound does not sound.
1
Rotate the [VOLUME] control to the far-left
position to set the volume to minimum.
2
Press the [] (Standby/On) switch to turn the power on.
3
Stop the acoustic piano sound by one of the following operations.
For upright pianos equipped with a sostenuto pedal
Pull the silencing lever towards you until you
hear a click and feel the mechanism catch.
For upright pianos not equipped with a sostenuto pedal
Press the center pedal and slide it to the left.
For grand pianos
Make sure that the [Aco.] lamp is
turned off.
If the lamp is lit, press the [VOLUME] control
to turn it off.
4
Rotate the [VOLUME] control to the
right slightly and make sure that the
[TA] lamp lights up.
NOTE
When the volume is set to minimum, when the Voice is
set to “---” (Off; page 21), or when headphones are
connected, the [TA] lamp does not light up.
5
While playing the keyboard, adjust the volume level by rotating the [VOLUME]
control.
Rotating to the right increases the volume, while rotating to the left decreases it.
NOTE
The physical sound of the keyboard mechanism remains even when playing in the TransAcoustic mode.
Off
Lights up
19
English
TA2 Owners Manual
Layering the digital sound with the acoustic piano sound
(Layer mode)
You can have both the acoustic piano sound and the digital sound layered together as you play the keyboard.
The operation is the same as that of the TransAcoustic mode, however, step 3 is unnecessary.
For upright pianos, make sure that the silencing lever or the center pedal is at the position in which the acoustic
piano sound is emitted (page 17).
For grand pianos, press the [VOLUME] control to turn the [Aco.] lamp on (page 17), and then rotate the
[VOICE/VALUE] control to select a Voice other than “---” (Off; page 21).
NOTE
This instrument is finely tuned before it is shipped. However, the pitch may gradually go out of tune, depending on
circumstances such as temperature and humidity. When you detect a difference between the pitch of the digital sound and
acoustic sound, tune the piano mechanism, or adjust the Master Tune parameter in the Function settings (page 41). For
tuning, consult a professional piano technician.
The volume of the acoustic piano sound cannot be adjusted by using the [VOLUME] control.
When the Voice is set to “---” (Off; page 21), you can play only the acoustic piano sound. The digital sound is not emitted.
This Voice is useful when you want to play along with the metronome sound yet use only the acoustic piano sound.
20
TA2 Owner’s Manual
Playing the sound muted (Silent Piano mode)
You can play with the sound muted and listen to the digital sound through the headphones. The sound cannot
be heard from the piano. The movement of the keys is detected by the optical sensors and transmitted to the
tone generator, and then the sound is output from the headphones.
1
Rotate the [VOLUME] control to the far-left
position to set the volume to minimum.
2
Press the [] (Standby/On) switch to turn the power on.
3
Stop the acoustic piano sound by one of the following operations.
For upright pianos equipped with a sostenuto pedal
Pull the silencing lever towards you until you
hear a click and feel the mechanism catch.
For upright pianos not equipped with a sostenuto pedal
Press the center pedal and slide it to the left.
For grand pianos
Make sure that the [Aco.] lamp is
turned off.
If the lamp is lit, press the [VOLUME] control
to turn it off.
4
Plug the headphones into the [PHONES] jack (page 16).
5
While playing the keyboard, adjust the volume level by rotating the [VOLUME]
control.
Rotating to the right increases the volume, while rotating to the left decreases it.
NOTE
The physical sound of the keyboard mechanism remains even when playing in the Silent Piano mode.
Off
1 / 1

Yamaha TA2 Manuale del proprietario

Categoria
Pianoforti digitali
Tipo
Manuale del proprietario