Panasonic DMW-FL360LE Manuale utente

GK

E

Operating Instructions

Manuel d’utilisation

使用说明书

FLASH

闪光灯

PP

until

2012/10/22

VQT4Q07

F1012CT0

Please read these instructions carefully before using this

product, and save this manual for future use.

Il est recommandé de lire attentivement ce manuel avant d’utiliser

l’appareil et de le conserver pour consultation ultérieure.

请于使用前仔细阅读操作使用说明书 , 并妥善保管。

DMW-FL360L

Model No.

Modèle

型号

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or,

contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: [email protected]

Pour de I’aide, composez le 1-800-99-LUMIX (1-800-995-8649) ou

envoyez un courriel à : [email protected]

VQT4Q07_PP_E_GK.book 1 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

2

Operating Instructions

FLASH

Thank you for purchasing Panasonic product.

Please read these instructions carefully before using this product, and save this

manual for future use.

Contents

Information for Your Safety

Information for Your Safety..............2

Precautions......................................6

Supplied Accessories ......................6

Names of Parts................................7

Control Panel...................................7

Continuous Firing.............................7

Preparing a Battery

(optional)..........................................8

Loading Batteries.............................8

Attaching to the Camera..................8

Turning on the Flash........................8

Shooting ..........................................9

Flash Mode....................................10

Button Functions............................11

Wireless Flash Settings.................12

Placing Wireless Flash Units.........12

Fixing the Irradiation Angle...........13

Using the Wide Panel....................13

Using the Catch Light Plate...........13

Other Settings...............................13

Custom Settings............................14

Camera without Communication

Functions ......................................15

Slave Mode...................................16

Cautions for Use ...........................16

Specifications................................16

Limited Warranty (ONLY FOR

U.S.A. AND PUERTO RICO)........18

Limited Warranty

(ONLY FOR CANADA) .................21

CAUTION!

To reduce the risk of fire, electric shock or product damage,

• Do not install or place this unit in a bookcase, built-in cabinet or in another

confined space. Ensure this unit is well ventilated.

VQT4Q07_PP_E_GK.book 2 ページ２０１２年１０月２３日　火曜日　午前９時３９分

3

(ENG) VQT4Q07

ENGLISH

IMPORTANT SAFETY

INSTRUCTIONS

When using your photographic equipment, basic safety

precautions should always be followed, including the following:

≥ Read and understand all instructions before using.

≥ Close supervision is necessary when any appliance is

used by or near children. Do not leave appliance

unattended while in use.

≥

Care must be taken as burns can occur from touching hot

parts.

≥ Do not operate if the appliance has been dropped or

damaged - until it has been examined by qualified

service personnel.

≥ Let appliance cool completely before putting away.

≥

To reduce the risk of electric shock, do not immerse this

appliance in water or other liquids.

≥ To reduce the risk of electric shock, do not disassemble

this appliance, but take it to qualified service personnel

when service or repair work is required. Incorrect

reassembly can cause electric shock when the

appliance is used subsequently.

≥ The use of an accessory attachment not recommended

by the manufacturer may cause a risk of fire, electric

shock, or injury to persons.

SAVE THESE

INSTRUCTIONS

VQT4Q07_PP_E_GK.book 3 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

4

∫ About the batteries

•Do not heat or expose to flame.

•Do not leave the battery(ies) in a car exposed to direct sunlight for a long

period of time with doors and windows closed.

•If rechargeable batteries are to be used, then rechargeable batteries

manufactured by Panasonic are recommended.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

CAUTION

•Danger of explosion if battery is incorrectly replaced. Replace only with

the type recommended by the manufacturer.

•When disposing the batteries, please contact your local authorities or

dealer and ask for the correct method of disposal.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna.

≥ Increase the separation between the equipment and receiver.

≥ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

≥ Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void

the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Support Contact:

Panasonic Consumer Marketing Company of North America

Telephone No.: 1-800-211-PANA (7262)

VQT4Q07_PP_E_GK.book 4 ページ２０１２年１０月２３日　火曜日　午前９時３９分

5

(ENG) VQT4Q07

THE FOLLOWING APPLIES ONLY IN CANADA.

-If you see this symbol-

This Class B digital apparatus complies with Canadian ICES-003.

Information on Disposal for Users of Waste Electrical & Electronic

Equipment (private households)

This symbol on the products and/or accompanying

documents means that used electrical and

electronic products should not be mixed with

general household waste.

For proper treatment, recovery and recycling,

please take these products to designated collection

points, where they will be accepted on a free of

charge basis. Alternatively, in some countries you

may be able to return your products to your local

retailer upon the purchase of an equivalent new

product.

Disposing of this product correctly will help to save

valuable resources and prevent any potential

negative effects on human health and the

environment which could otherwise arise from

inappropriate waste handling. Please contact your

local authority for further details of your nearest

designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in

accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your

dealer or supplier for further information.

Information on Disposal in other Countries outside the European

Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or

dealer and ask for the correct method of disposal.

VQT4Q07_PP_E_GK.book 5 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

6

Precautions

≥ This is the external flash for the Panasonic digital cameras (mentioned as flash in

the following). When this flash is used together with a digital camera that

supports wireless mode, shooting with a wireless flash becomes possible.

Available functions vary depending on the digital camera used. As for the

corresponding digital cameras, please visit our web site.

http://panasonic.jp/support/global/cs/dsc/

(This Site is English only.)

∫ Handling the unit

≥ Do not subject the unit to strong vibration or impact. Doing so may not only

cause the unit to malfunction but also cause the flash head to break.

≥ Sand and dirt may cause the unit to malfunction. When using the unit in an

environment such as a beach, take steps to protect it from sand and dirt.

≥ This unit is neither dust-proof nor splash-proof. If by any chance water

droplets, etc. are splashed on the unit, wipe them off with a dry cloth. If the

unit fails to function correctly, consult your dealer or Panasonic.

≥ Read the operating instructions for your digital camera.

Supplied Accessories

[Inspection to be performed when you unpack the unit]

When removing the unit from its packing box, check that the main unit and the

supplied accessories are there and also check their external appearance and

functions to verify that they have not sustained any damage during distribution and

transportation.

If you discover any trouble, contact your vendor before using the product.

Product numbers correct as of October 2012. These may be subject to change.

1 Flash case

2 Flash stand

≥ The batteries are optional.

VFC4916 VFB0243

12

VQT4Q07_PP_E_GK.book 6 ページ２０１２年１０月２３日　火曜日　午前９時３９分

7

(ENG) VQT4Q07

Names of Parts

Control Panel

Continuous Firing

The flash may become hot when fired many times in succession, resulting in

damage or malfunction. The flash should be fired no more than 10 times in

succession at intervals of 2.5 seconds, after which it should be left unused for at

least 10 minutes.

1 Wide panel

2 Flash head

3 Wireless sensor

4 AF assist lamp/LED light

5 Flash sensor

6 Catch light plate

7 Control panel

8 [AUTO CHECK] lamp

9 [TEST/CHARGE] button/lamp

: [OK] button

; Bounce unlock button

< [BACK LIGHT] button

= [ON/OFF] button

> Lock lever

? Dial

a (2): Flash intensity adjustment button

b (3): [MODE] button

c (1): LED light button

d (4): [ZOOM] button

1 FP firing

2 Flash mode

3 Guide number

(GN)

4 Flash intensity

adjustment

5 ZOOM value

6 FOUR THIRDS

7 Zoom mode

8 LED light

9 ISO sensitivity

: RC mode group

; Aperture (F)

< RC mode

channel

= Temperature

warning

> Distance units































b

d

a

c















VQT4Q07_PP_E_GK.book 7 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

8

Preparing a Battery (optional)

Choose from the below batteries:

≥ LR6/AA Alkaline dry batteries (x 4)

≥ HR6/AA Rechargeable nickel metal hydride batteries (Ni-MH) (x 4)

The use of batteries made by Panasonic is recommended.

Loading Batteries

≥ Use alkaline dry batteries or rechargeable nickel

metal hydride batteries.

1 Slide the battery cover to open it.

2 Insert the batteries with correct [r]/

[s] polarity.

3 Close the battery cover by sliding it

back firmly as far as it will go.

Attaching to the Camera

Confirm that both the camera and flash are off. Attaching or removing the flash

while either the flash or the camera is on may result in malfunction.

1 Slide the lock lever in the direction

opposite to that indicated by the

[LOCK 1] icon (1).

2 Slide the flash into the hot shoe until

it clicks securely into place (2).

3 Slide the lock lever to the [LOCK 1]

position (3).

≥ To remove the flash, slide the lock lever in the direction opposite to the [LOCK1]

arrow and slide it from the shoe.

Turning on the Flash

Attach a flash to the camera, and then turn the camera on.

R6/AA Manganese dry batteries cannot be used.

1 [AUTO CHECK] lamp

2 [TEST/CHARGE] lamp

3 Control panel

4 [ON/OFF] button















VQT4Q07_PP_E_GK.book 8 ページ２０１２年１０月２３日　火曜日　午前９時３９分

9

(ENG) VQT4Q07

Press the [ON/OFF] button.

≥ The control panel display will turn on.

≥

To turn the flash off, press the [ON/OFF] button again.

≥ Replace the batteries if the [TEST/CHARGE] lamp does not light after:

≥ If the [TEST/CHARGE] lamp and [AUTO CHECK] lamp blink simultaneously,

batteries are running low. Replace the batteries. Using a considerably

exhausted battery may result in malfunction.

≥ The flash will enter sleep mode whenever the camera enters sleep mode.

≥ If no operations are performed for approximately 60 minutes, the flash will turn off

automatically. Press the [ON/OFF] button to turn it on.

≥ Oscillating sound may be output while charging the flash, but this is not

malfunction.

Shooting

1 Use camera controls to choose the flash mode.

See the camera operating instructions for details.

2 Choose a flash mode.

“Flash Mode” (P10)

• The camera and flash will exchange shooting information and the flash working

range will be displayed in the control panel.

3 Press the shutter button halfway.

• Flash range varies with camera settings (ISO sensitivity, aperture, and lens

focal length).

4 Press the shutter button the rest of the way down to take the

picture.

The unit emits light in proper exposure if [AUTO CHECK] lamp flashes for

approximately 5 seconds.

≥ When using a flash, flash light may be blocked by the lens body, lens hood, etc.

≥ Use the wide panel to prevent overexposure at ranges of less than 1 m (3.3 feet)

(P13).

30 seconds (Alkaline dry batteries)

10 seconds (Rechargeable nickel metal hydride batteries)

1 Flash mode

2 Lighting angle

Displayed according to the focal length of the

lens.

3 [AUTO CHECK] lamp

4 Light working range







VQT4Q07_PP_E_GK.book 9 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

10

Flash Mode

Choose a flash mode according to your subject and shooting

conditions.

1 Press the [MODE] (3) button.

2 Rotate the dial to select a flash mode.

• While [MANUAL] or [FP MANUAL] is selected, pressing [MODE] (3) button

allows you to set the guide number. Press the [MODE] (3) again to turn back.

3 Press the [OK] button.

Control panel display Control operation

[ TTL AUTO]

The flash light intensity is controlled automatically

according to the camera’s setup. The flash will be

adjusted based on the brightness taken through the

camera’s lens. Usually use this mode with a camera

with communication capability.

[ AUTO]

Blinks:

Out of flash working range

The flash will be adjusted based on the brightness

captured by flash sensor on the flash. If the camera

has communication capability, this mode can be

used only when the camera is an AUTO-compatible

model.

[ MANUAL] In this mode, the flash is emitted according to the

guide number setting. The flash displays the

optimal range, which is calculated based on the

guide number and camera settings.

[ RC]

Wireless control is available with Panasonic digital

cameras that support wireless mode. (P12)

[ FP TTL AUTO] FP firing. This mode allows you to use flash

photography even at shutter speeds faster than the

flash synchronization speed of the camera.

≥ Maximum output is reduced, resulting in a smaller

flash working range. Flash working range also

diminishes with shutter speed.

[FP TTL AUTO]: Flash level is set automatically.

[FP MANUAL]: The flash fires at the selected guide

number. The flash displays the optimal range,

which is calculated based on the guide number and

camera settings.

[ FP MANUAL]

VQT4Q07_PP_E_GK.book 10 ページ２０１２年１０月２３日　火曜日　午前９時３９分

11

(ENG) VQT4Q07

Button Functions

[ SL AUTO] The flash can be fired remotely in sync with any

flash fired by other units.

[SL AUTO]: Flash level is set automatically.

[SL MANUAL]: The flash fires at the selected guide

number.

[ SL MANUAL]

Button Function Use

[]

Adjust flash level by up to w5 EV.

This value is combined with

adjustments to flash

compensation made using the

camera.

1 Press [ ] (2) or [ZOOM]

(4).

2 Rotate the dial to select the

value, and then press the

[OK] button.

[ZOOM]

Adjust the lighting angle manually.

[M] appears in the display.

[]

Manually turn the LED light on or

off.

1 Before shooting, set the

LED light to [M].

“Other Settings” (P13)

2 Press [ ] (1) to turn the

LED light on. Press [ ] (1)

again to turn the LED light

off. To view the LED

brightness setting, press

and hold [ ] (1) for 2

seconds while the LED light

is on.

≥ The flash and batteries may

become warm if you keep the

LED light on, but this is not a

malfunction.

[

TEST/

CHARGE

]

To fire a test flash, press the [TEST/CHARGE] button while the [TEST/

CHARGE] lamp is lit.

[BACK

LIGHT]

The control panel backlight lights for about 15 seconds.

Control panel display Control operation

VQT4Q07_PP_E_GK.book 11 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

12

Wireless Flash Settings

Wireless control is available with Panasonic digital cameras that support wireless

mode. See the operating instructions of the digital camera for operation of the

digital camera during wireless flash shooting.

1 Set the camera to wireless mode.

2 Set the flash to [RC] mode.

“Flash Mode” (P10)

• When [RC] is selected, pressing [MODE] (3) button

allows you to set a channel. Press the [MODE] (3) button again to turn back.

3 Use the flash to select the channel and group.

“Other Settings” (P13)

The Firing mode, the flash adjustment, and the manual flash adjustment can be set

for each group by operating the camera.

Placing Wireless Flash Units

Since the communication is performed with the flash emission of the camera, the

flash positioning range varies with the camera. Refer to the camera operating

instructions for details about the flash positioning range.

1 Attach the supplied stand.

• Slide the lock lever in the direction opposite to that

indicated by the [LOCK 1] icon (1) and slide the flash

onto the stand until it clicks securely into place (2).

• Slide the lock lever to the [LOCK 1] position to latch the

flash in place.

• To remove the flash, slide the latch in the direction opposite to the [LOCK 1]

arrow and slide it from the stand.

2 Position the flash with the wireless sensor

(A) facing the camera.

≥ We recommend using a single group of up to three remote

flash units.

≥ Flash may not fire due to the angle or distance between the

camera and the object.

Channel

Set the camera and flash to the same channel.

Group

The camera can adjust flash settings separately for up to 3

groups; choose the group to which the flash belongs.

Take a test shot after positioning.







VQT4Q07_PP_E_GK.book 12 ページ２０１２年１０月２３日　火曜日　午前９時３９分

13

(ENG) VQT4Q07

Fixing the Irradiation Angle

Point the flash head at a wall or ceiling for bounce flash

photography. The area illuminated at ranges of 0.5 m

(1.6 feet) to 1.0 m (3.3 feet) will not be correct; point the

flash down.

Pressing the bounce unlock button, turn the

light-emitting section up/down and left/right.

Using the Wide Panel

Use the built-in wide panel for flash photography when the

focal length of the lens is wider than 12 mm.

Slide out the wide panel and place it on the flash

head.

≥ The estimated range display changes when the wide panel

is used.

≥ The lighting angle can be set to 10 mm and 8 mm only.

≥ Do not tilt the wide panel up.

≥ The ZOOM display will blink if the lens has a focal length of

12 mm or more.

Using the Catch Light Plate

Reflecting the flash light allows you to shoot with the catch

light effect, which reflects light in the models eyes.

Slide out the catch light plate.

Point the flash directly upward with the plate toward the

subject.

Other Settings

The following options can be selected in the control panel.

1 Press the [OK] button.

An item will blink in the control panel.

2 Press 3/4/2/1 to highlight items.

3 Rotate the dial to select the setting,

and then press [OK] button.

90º

7º

180º

VQT4Q07_PP_E_GK.book 13 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

14

Custom Settings

Customize settings for improved ease of use.

1 Press and hold the [OK] button for more than 2 seceonds.

The flash will enter custom settings mode.

2 Press 3/4 to highlight items.

3 Rotate the dial to change the highlighted item.

4 Press and hold the [OK] button for more than 2 seconds to

end the settings.

Option Description

MODE (flash mode) P10

(flash intensity adjustment) P11

ZOOM (lighting angle) P11

(LED light)

Choose whether the LED lights automatically

or manually.

[A]: Lights automatically as required.

[M]: Lights when the LED light button is

pressed.

None: Does not light.

GN (guide number) Adjust flash level.

ISO sensitivity Adjust ISO sensitivity.

Group Choose a group for [RC] mode. (P12)

Aperture Adjust aperture.

Channel Choose a channel for [RC] mode. (P12)

Control panel Option Description

AF assist

lamp

[A]: Controlled by camera.

[OFF]: Does not light.

LED

brightness

[1/1] to [1/16]: Adjust LED brightness.

Slave

flash

[ON]: Flash control display shows slave mode.

[OFF]: Flash control display does not show

slave mode.

Flash

cable

[ON]: Flash cable not used.

[OFF]: Flash cable used.

Zoom

display

[]:

Display values for FOUR THIRDS lenses.

None: Display 35 mm film camera equivalent

values.

VQT4Q07_PP_E_GK.book 14 ページ２０１２年１０月２３日　火曜日　午前９時３９分

15

(ENG) VQT4Q07

∫ Returning the custom settings to the default setting

Press and hold the [OK] button and [BACK LIGHT] button together for more

than 2 seconds

The control panel will blink once when settings are reset.

Display of the distance unit does not return to the default setting.

Camera without Communication Functions

∫ AUTO

Set aperture and ISO sensitivity to the values selected with the camera.

1 Set the flash mode to [AUTO].

“Flash Mode” (P10)

• When [AUTO] is selected, pressing [MODE] (3) button

allows you to set the aperture. Press the [MODE] (3)

button again to turn back.

2 Match the zoom position to the focal length of the lens.

“[ZOOM]” (P11)

3 Adjust aperture and ISO sensitivity.

“Other Settings” (P13)

If the selected values are out of the flash working range, [ISO] and [F] will blink in

the display. The [AUTO CHECK] lamp blinks for about 5 seconds after the shutter

is released to show that the flash has fired successfully.

Distance

units

[m]: Distances displayed in meters.

[ft]: Distances displayed in feet.

Wide

panel

detection

[ON]: Flash detects position of wide panel.

Lighting angle adjusted automatically.

[OFF]: Flash does not detect wide panel

position.

Guide

number

display

[ON]: Flash output is shown as a guide number.

[OFF]: Flash output is shown as a relative value.

Auto light

sensing

[ON]: The ISO sensitivity and the aperture are

adjusted to match the camera.

[OFF]: The ISO sensitivity and the aperture of

the flash can be adjusted with the dial.

≥ This can only be used for digital cameras with

communication functions. (Only when the flash

mode is set to [AUTO] or [SL AUTO] mode.)

Auto ISO

display

[25] to [3200]: Display the ISO sensitivity when

[AUTO] is selected as the flash mode for

cameras that can not communicate with the

flash unit.

Control panel Option Description

VQT4Q07_PP_E_GK.book 15 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

16

∫ MANUAL

Choose the guide number.

1 Set the flash mode to [MANUAL].

“Flash Mode” (P10)

2 Match the zoom position to the focal length

of the lens.

“[ZOOM]” (P11)

3 Set the guide number.

“Other Settings” (P13)

Slave Mode

The flash can be fired remotely in sync with any flash fired by other units.

1 Set the flash mode to [SL AUTO] or [SL

MANUAL].

“Flash Mode” (P10)

Adjust other flash settings as for [AUTO] or [MANUAL] mode.

“Camera without Communication Functions” (P15)

2 Position the flash.

Flash positioning method is same as the wireless mode.

“Placing Wireless Flash Units” (P12)

Refer to the camera operating instructions for details about

the flash positioning range.

• Set the flash mode of the camera to the manual which

does not fire the pre-flash. If the camera fires the pre-

flash, the external flash synchronizes with the pre-flash of

the camera, and cannot fire the flash light properly.

• The flash may fire in response to flash units used by other

photographers.

Cautions for Use

∫ About the unit

Do not carry the unit when it is still attached to the camera body.

∫ About the batteries

Be sure to remove the batteries when you will not be using the unit for a long

period of time.

Specifications

Specifications are subject to change without notice.

Power requirements:

DC 6.0 V

VQT4Q07_PP_E_GK.book 16 ページ２０１２年１０月２３日　火曜日　午前９時３９分

17

(ENG) VQT4Q07

For the U.S.A.

Panasonic Consumer Marketing Company of North America,

Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

For CANADA

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

www.panasonic.ca

Printed in China

Batteries

recommended for use

LR6/AA

Alkaline dry batteries

k

4/

HR6/AA Rechargeable nickel metal hydride batteries

(Ni-MH)

k 4

Charging time

(from full flash until

the [TEST/CHARGE]

lamp lights)

Approx. 2.0 sec.: LR6/AA Alkaline dry batteries

Approx. 1.5 sec.: HR6/AA Rechargeable nickel metal

hydride batteries

Firing period Approx. 1/20000 sec. to 1/500 sec.

(Varies depending on the flash intensity; FP firing

excluded.)

No. of flashes

(with full flash)

Approx. 250 flashes:

LR6/AA

Alkaline dry batteries

Approx. 350 flashes: HR6/AA Rechargeable nickel

metal hydride batteries (min. 1900 mAh type)

(Differs depending on the photo taking conditions.)

AF assist lamp Effective distance: approximately 1 m (3.3 feet) to 5 m

(16 feet)

(Differs depending on the digital camera and type of

lens used)

Flash modes TTL AUTO/AUTO/MANUAL/FP TTL AUTO/

FP MANUAL/SL AUTO/SL MANUAL/RC

Guide number 36 (ISO100), 12 (ISO100: When the wide panel is used)

Lighting angle Covers the angle of view of 12 to 42 mm lenses (35 mm

film camera equivalent: 24 to 85 mm)

(With wide panel: 8 mm lens, 35 mm film camera

equivalent: 16 mm)

Dimensions

Approx. 62.0 mm (W)

k

104.0 mm (H)

k

98.0 mm (D)

[2.441

q

(W)

k

4.095

q

(H)

k

3.858

q

(D)]

(excluding the projecting parts)

Mass (weight) Approx. 376 g/0.829 lb (including batteries)

Approx. 257 g/0.567 lb (main unit)

Operating temperature 0 °C to 40 °C (32 °F to 104 °F)

Operating humidity 10%RH to 80%RH (no condensation)

VQT4Q07_PP_E_GK.book 17 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

18

Limited Warranty

(ONLY FOR U.S.A. AND PUERTO RICO)

Panasonic Consumer Marketing Company of North America,

Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Products Limited Warranty

Limited Warranty Coverage (For USA and Puerto Rico Only)

If your product does not work properly because of a defect in materials or

workmanship, Panasonic Consumer Marketing Company of North America

(referred to as “the warrantor”) will, for the length of the period indicated on the

chart below, which starts with the date of original purchase (“warranty period”), at

its option either (a) repair your product with new or refurbished parts, (b) replace it

with a new or a refurbished equivalent value product, or (c) refund your purchase

price. The decision to repair, replace or refund will be made by the warrantor.

During the “Labor” warranty period there will be no charge for labor. During the

“Parts” warranty period, there will be no charge for parts. This Limited Warranty

excludes both parts and labor for non-rechargeable batteries, antennas, and

cosmetic parts (cabinet). This warranty only applies to products purchased and

serviced in the United States or Puerto Rico. This warranty is extended only to the

original purchaser of a new product which was not sold “as is”.

Mail-In Service

For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the

product prepaid to:

Panasonic Exchange Center

4900 George McVay Drive

Suite B

McAllen, TX 78503

panacare

@us.panasonic.com

Online Repair Request

To submit a new repair request and for quick repair status visit our Web Site at

www.panasonic.com/repair

.

Product or Part Name Parts Labor

Digital Camera Accessories 90 Days 90 Days

Batteries (Non-rechargeable batteries are

not warranted.)

10 Days Not Applicable

VQT4Q07_PP_E_GK.book 18 ページ２０１２年１０月２３日　火曜日　午前９時３９分

19

(ENG) VQT4Q07

When shipping the unit, carefully pack, include all supplied accessories listed in the

Owner’s Manual, and send it prepaid, adequately insured and packed well in a

carton box. When shipping Lithium Ion batteries please visit our Web Site at

www.panasonic.com/BatteryHandling

as Panasonic is committed to providing the

most up to date information. Include a letter detailing the complaint, a return

address and provide a daytime phone number where you can be reached. A valid

registered receipt is required under the Limited Warranty.

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER

WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE

INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF

PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY

UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship, and

DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO

DOES NOT COVER damages which occurred in shipment, or failures which are

caused by products not supplied by the warrantor, or failures which result from

accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty

installation, set-up adjustments, misadjustment of consumer controls, improper

maintenance, power line surge, lightning damage, modification, introduction of sand,

humidity or liquids, commercial use such as hotel, office, restaurant, or other business

or rental use of the product, or service by anyone other than a Factory Service Center

or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER

“LIMITED WARRANTY COVERAGE”.

THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING

OUT OF ANY BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to and from the servicer,

loss of or damage to media or images, data or other memory or recorded content.

The items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF

MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential

damages, or limitations on how long an implied warranty lasts, so the exclusions

may not apply to you.

This warranty gives you specific legal rights and you may also have other rights

which vary from state to state. If a problem with this product develops during or

after the warranty period, you may contact your dealer or Service Center. If the

problem is not handled to your satisfaction, then write to the warrantor’s Consumer

Affairs Department at the addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED

WARRANTY, ARE YOUR RESPONSIBILITY.

VQT4Q07_PP_E_GK.book 19 ページ２０１２年１０月２３日　火曜日　午前９時３９分

VQT4Q07 (ENG)

20

As of October 2012

Customer Services Directory (United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate your nearest

Dealer or Service Center; purchase Parts and Accessories; or make

Customer Service and Literature requests by visiting our Web Site at:

http://www.panasonic.com/help

or, contact us via the web at:

http://www.panasonic.com/contactinfo

You may also contact us directly at:

1-800-211-PANA (7262)

Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Accessory Purchases (United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books online for all Panasonic

Products by visiting our Web Site at:

http://www.pstc.panasonic.com

Or, send your request by E-mail to:

[email protected]nic.com

You may also contact us directly at:

1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)

(Monday-Friday 9am-9pm EST)

Panasonic National Parts Center

20421 84th Ave S., Kent, WA 98032

(We accept Visa, MasterCard, Discover Card, American Express)

For hearing or speech impaired TTY users, TTY: 1-866-605-1277

VQT4Q07_PP_E_GK.book 20 ページ２０１２年１０月２３日　火曜日　午前９時３９分

La pagina si sta caricando...

Panasonic DMW-FL360LE Manuale utente

Panasonic DMW-FL360LE Manuale utente

in altre lingue

Documenti correlati