IKEA RENLIGFWM Manuale utente

RENLIG

FWMND6

GB

DE

FR

IT

ENGLISH 4

DEUTSCH 29

FRANÇAIS 58

ITALIANO 91

Contents

Safety information 4

Product description 7

Control panel 8

First use 10

Personalisation 11

Daily use 11

Helpful hints and tips 14

Washing programmes 15

Consumption values 17

Care and cleaning 18

What to do if… 21

Technical data 24

Installation 24

Electrical connection 25

Environment concerns 26

IKEA GUARANTEE 26

Subject to change without notice

Safety information

For your safety and correct operation of

the appliance, read this manual careful-

ly before installation and use. Always keep

these instructions with the appliance even if

you move or sell it. Users must fully know the

operation and safety features of the appli-

ance.

The manufacturer is not responsible for dam-

ages caused by incorrect installation and use.

Children and vulnerable people safety

• Do not let persons, children included, with

reduced physical sensory, reduced mental

functions or lack of experience and knowl-

edge to use the appliance. They must have

supervision or instruction for the operation

of the appliance by a person who is re-

sponsible for their safety.

• Keep all packaging well away from chil-

dren. There is risk of suffocation.

• Keep all detergents in a safe area. Do not

let children touch the detergents.

• Make sure that children or pets do not

climb into the drum. Please check into the

drum before using it.

This appliance incorporates a special fea-

ture to prevent children and pets becoming

trapped inside the drum.

To activate this de-

vice, rotate the but-

ton clockwise (with-

out pressing it) in-

side the door until

the groove is hori-

zontal. If necessary

use a coin.

To disable this de-

vice and restore

the possibility of

closing the door,

rotate the button

anticlockwise until

the groove is verti-

cal.

General safety

• Do not change the specifications or modify

this product. There is risk of injury and

damage to the appliance.

• If the appliance is delivered in the winter

months when there are minus tempera-

tures, store it at room temperature for 24

hours before using for the first time. Please

read the “dangers of freezing” chapter.

• This appliance is designed for use in nor-

mal inside temperature. Manufacturer is

not responsible for freezing damages.

• Always unplug the appliance and turn off

the water supply after use, cleaning and

maintenance.

ENGLISH 4

Installation

• A qualified and competent person must do

the electrical and the plumbing installation.

• This appliance is heavy. Take care when

you move it.

• Make sure that the appliance is not dam-

aged because of transport. Do not connect

a damaged appliance. If necessary, con-

tact dedicated After Sales Service.

• Remove all packaging and transit bolts be-

fore first use. Serious damage can occur to

the appliance or to neighbouring cabinets

or furniture.

• Keep all transit devices so that they can be

refitted if the appliance ever has to be

transported again. Please refer to the rele-

vant steps in the Assembly Instruction.

• Never place cardboard, wood or similar

materials under the appliance to compen-

sate for any unevenness in the floor.

Level accurately the appliance and tight

the lock nuts to prevents vibration, noise

and displacement of the appliance during

operation.

• If your appliance is installed on a carpeted

floor, adjust the feet in order to ensure that

the air must circulate freely under the ap-

pliance.

• Check that your appliance is not standing

on the inlet and drain hose and the work-

top or the back of the appliance is not

pressing the electrical supply cable against

the wall.

• Always be sure, that there is no water

leakage from hoses and their connections

after the installation.

• If the appliance is installed in a location

subject to frost, please read the “dangers

of freezing” chapter.

Use

• The appliance is only for domestic use. Do

not use the appliance for commercial and

industrial use or for other uses.

• Only an authorised service engineer can

repair this appliance. Use only original

spare parts.

• Refer to the instructions on the label of

each item (garment) before washing.

• Do not overload the appliance. See the

Washing Programme Table.

• Before washing, ensure that all pockets are

empty and buttons and zips are fastened.

• Any objects such as coins, safety pins, nails,

screws, stones or any other hard, sharp

material can cause extensive damage and

must not be placed into the appliance.

• Treat stains such as paint, ink, rust, and

grass before washing.

• Only use the advised quantities of fabric

softener and detergent. Damage to the

fabric can ensue if you overfill. Refer to the

manufacturer’s recommendations of quan-

tities.

• Wash small items such as socks, laces,

washable belts etc. in a washing bag or

pillow case as it is possible for such items

to slip down between the tub and the inner

drum.

• Do not use your appliance to wash articles

with whalebones, items without hems,

frayed and torn. Underwired bras must

NOT be washed.

• Garments which have been in contact with

volatile petroleum products should not be

appliance washed. If volatile cleaning flu-

ids are used, care should be taken to en-

sure that the fluid is removed from the gar-

ment before placing in the appliance.

• The water we use normally contains lime. It

is a good idea to periodically use a water

softening powder in the appliance. Do this

without any laundry into the drum and ac-

cording to the softening powder manufac-

turer’s instructions. This will help to prevent

the formation of lime deposits making your

appliance more efficiency.

• Never pull the power supply cable to re-

move the plug from the socket; always

take hold of the plug itself.

• Never use the appliance if the power sup-

ply cable, the control panel, the working

surface or the base is damaged so that the

inside of the appliance is accessible.

Water inlet

• This appliance must be connected to a

cold water supply.

ENGLISH 5

• Do not use connection hoses from an old

appliance to connect it to the water supply.

• The water pressure must be in the limits

(refer to the chapter «Technical data» ta-

ble). Make sure that the local water au-

thority gives you the average mains pres-

sure in your area.

• Make sure that there are no kinks in the

water inlet hose and that the water inlet

hose is not squashed or entangled.

• Before connecting up the appliance to new

pipework or to pipework that has not been

used for some time, run off a reasonable

amount of water to flush out any debris

that may have collected in the pipes.

• Turn the inlet hose on the back of the ap-

pliance to the left or the right to suit the in-

stallation.

• The inlet hose must not be lengthened. If it

is too short and you do not wish to move

the tap, you will have to purchase a new,

longer hose specially designed for this

type of use.

• Before opening the water tap, be sure to

tighten the ring nut well to prevent any

leaks.

Water drainage

• Make sure the end of the drain hose can-

not come unhooked when the appliance is

emptying. This could be done by tying it to

the tap with a piece of string or attaching it

to the wall.

• The drain hose must be placed at a height

of not less than 44 cm and not more than

90 cm. Please refer to the Assembly In-

struction booklet.

Care and cleaning

• Before maintenance, switch off the appli-

ance and disconnect the mains plug from

the mains socket.

• Clean the exterior cabinet of the appliance

with soap and water only, and then dry

thoroughly.

• The washing powder and additive dis-

penser drawer should be cleaned regular-

ly.

• Inspected the pump regularly and particu-

larly if:

– the appliance does not empty and/or

spin

– the appliance makes an unusual noise

during draining due to objects such as

safety pins, coins etc. blocking the pump.

• Never remove the pump cover during a

wash cycle. Always wait until the appli-

ance has drained out the water. If you

have selected an high temperature wash-

ing programme please wait until the water

has cooled down.

• Ensure that the pump cover is securely re-

tightened to prevent any leaks.

ENGLISH 6

Product description

1 2

3

4

5

6

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Rating Plate

5 Drain pump

6 Adjustable feet

Detergent dispenser drawer

Compartment for detergent used for

prewash and soak phase or for stain re-

mover used during the stain action phase (if

available). The prewash and soak deter-

gent is added at the beginning of the wash

programme. The stain remover is added

during the stain action phase.

Compartment for powder or liquid de-

tergent used for main wash. If using liquid

detergent pour it just before starting the

programme.

Compartment for liquid additives (fabric

softener, starch).

Follow the product manufacturer’s rec-

ommendations on quantities to use

and do not ever exceed the «MAX» mark

in the detergent dispenser drawer. Any

fabric softener or starching additives must

be poured into the compartment before

starting the wash programme.

ENGLISH 7

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as the

buttons and the indicator lights. These are presented by relevant numbers on the follow-

ing pages.

21

5678910

3 4

1 Programme selector dial

2 Display

3 Door locked indicator light

4 Delay Start button

5 Start/Pause button

6 Extra Rinse button

7 Easy Iron button

8 Prewash button

9 Multi-Functions button

10 Spin reduction button

Table of symbols

= On/Off - Reset

= Spin

= Cottons = No spin

= Cold wash

= Rinse Hold

= Synthetics = Options

= Delicates = Economy

= Handwash = Quick Wash

= Wool = Prewash

= Special programmes = Easy Iron

= Jeans = Extra Rinse

= Soak = Start/Pause

= Rinses = Door locked

= Drain = Delay Start

ENGLISH 8

2

Programme selector dial It allows you to switch the appliance On/Off and/or to select a

programme.

Spin reduction button By pressing this button you can change the spin speed of the

selected programme.

• No Spin option: by selecting this option, all spinning phases

are suppressed and replaced by a drain, so as not to wrin-

kle the laundry. Recommended for extremely delicate fab-

rics.

• Rinse Hold option: by selecting this option the water of the

last rinse is not emptied out to prevent the fabrics from

creasing. Before opening the door it will be necessary to

empty out the water. To empty out the water, please read

the paragraph «At the end of the programme».

Multi-Functions button: By pressing this button, you can select only one of the options.

The relevant indicator light will light up.

• Economy: recommended washing programme for cottons

and synthetic items lightly or normally soiled at a tempera-

ture of 40° C or higher. The washing time will be prolonged

and the washing temperature will be reduced. You can use

this option if you want to wash normally soiled laundry and

at the same time save energy.

• Super Quick: a very short cycle for slightly soiled items that

have been worn for a short time.

Prewash button By selecting this option the appliance performs a prewash cy-

cle before the main wash phase. The washing time will be pro-

longed. This option is recommended for heavily soiled laundry.

Easy Iron button By selecting this option the laundry is gently washed and spun

to avoid any creasing. In this way ironing is easier. Further-

more the machine will perform some additional rinses in some

programmes. On cotton programmes the maximum spin speed

is reduced automatically.

Extra Rinse button This appliance is designed for saving energy. If it necessary to

rinse the laundry using an extra quantity of water (extra rinse),

select this option. Some additional rinses will be performed.

This option is recommended for people who are allergic to de-

tergents, and in areas where the water is very soft.

Start/Pause button This button allows you to start or to interrupt the selected

washing programme.

Door Locked indicator light The indicator light 3 illuminates when the programme starts

and indicates if the door can be opened:

• light on: the door cannot be opened. The machine is work-

ing or has stopped with water left in the tub.

• light off: the door can be opened. The programme is finished

or the water has been emptied out.

• light blinking: the door is opening in a few minutes.

ENGLISH 9

Delay Start button The programme can be delayed from 30 min - 60 min - 90

min, 2 hours and then by 1 hour up to a maximum of 20 hours

by means of this button.

Display

10.1 10.2

The display shows the following information:

• 10.1

– Child safety lock.

This device permits you to leave the appliance unatten-

ded during it's functioning.

• 10.2

– Duration of the selected programme.

After selecting a programme, the duration is displayed in

hours and minutes (for example

). The duration is

calculated automatically on the basis of the maximum rec-

ommended load for each type of fabric. After the pro-

gramme has started, the time remaining is updated every

minute.

– Delayed start.

The Selected delay set by pressing the relevant button

appears on the display for a few seconds, then the dura-

tion of the selected programme is displayed again. The

delay time value decreases by one unit every hour and

then, when 1 hour remains, every minute.

–Alarm codes.

In the event of operating problems, some alarm codes can

be displayed, for example

(see paragraph «What

to do if...»).

– Incorrect option selection.

If an option which is not compatible with the set wash pro-

gramme is selected, the message Err is displayed at the

bottom of the display for a few seconds and the integra-

ted red indicator light of button 5 start flashing.

– End of programme.

When the programme has finished the flashing zero (

)

is displayed, the indicator light 3 and the indicator light of

button 5 go out and the door can be opened.

First use

1. Ensure that the electrical and water con-

nections comply with the installation in-

structions.

2. Remove any material from the drum.

3. Pour 2 liters of water into the main wash

compartment

of the detergent drawer

in order to activate the ECO valve.

Select a cotton cycle at the highest tem-

perature without any laundry in the ap-

pliance, to remove any manufacturing

residue from the drum and tub.

Pour 1/2 a measure of detergent into the

main wash compartment and start the

appliance.

ENGLISH 10

Personalisation

Acoustic signals

The machine is provided with an acoustic de-

vice, which sounds in the following cases:

• at the end of the cycle

• if there is a fault.

By pressing the 7 and 8 buttons simultane-

ously for about 6 seconds, the acoustic signal

is deactivated (except if there is a fault). By

pressing these 2 buttons again, the acoustic

signal is reactivated.

Child safety lock

This device permits you to leave the appli-

ance unattended so you do not need to wor-

ry that children might be injured by or cause

damage to the appliance. This function re-

mains enabled also when the washing ma-

chine is not working.

There are two different ways to set this op-

tion:

1. Before pressing button 5: it will be impos-

sible to start the machine.

2. After pressing button 5: it will be impossi-

ble to change any other programme or

option.

To enable or disable this option press simul-

taneously for about 6 seconds buttons 9 and

10 until on the display, the icon

appears

or disappears.

Daily use

Open the door

Open the door by carefully pulling the door

handle outwards.

Load the laundry

Place the laundry in

the drum, one item

at a time, shaking

them out as much as

possible.

By pushing the port-

hole frame, close

firmly the door.

Measure out detergent and fabric softener

1

Pour the detergent

into the main wash

compartment

or

in the appropriate

compartment if the

selected pro-

gramme/option it

requires (see more

details in "Detergent

dispenser drawer").

To pour the right

quantity of the de-

tergent, see more

details in "Degrees

of water hardness".

ENGLISH 11

2 Pour fabric softener

into the compart-

ment marked

(must not exceed the

«MAX» mark in the

drawer).

Close the drawer gently

Select the required programme by turning

the programme selector dial (1)

The appliance is now switched on. The indi-

cator light of button 5 starts to blink.

At the end of the programme the selector di-

al must be turned to position O, to switch the

appliance off.

For the description of each wash cycle,

the compatibility among the washing

programmes and the options, consult the

chapter «Washing Programmes».

Caution! If you turn the programme

selector dial to another programme

when the appliance is working, the red

indicator light of button 5 will blink 3 times

and the message Err appears on the display

to indicate a wrong selection. The appliance

will not perform the new selected

programme.

Reduce the spin speed or select the No Spin

or Rinse Hold by pressing button 10

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 10 repeatedly to change the

spin speed, if you want your laundry to be

spun at a different speed. The relevant indi-

cator light illuminates.

Select the available options by pressing

buttons 6, 7, 8 and 9

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the programme.

When these buttons are pressed, the corre-

sponding indicator lights illuminate. When

they are pressed again, the indicator lights

go out. If an incorrect option is selected, the

integrated red indicator light of the button 5

flashes for 3 times and the message Err ap-

pears on the display.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

Select the Delay Start by pressing button 4

Before you start the programme, if you wish

to delay the start, press this button to select

the desired delay.

The selected delay time value will appear on

the display for a few seconds, then the dura-

tion of the programme will appear again.

You must select this option after you have set

the programme and before you start the pro-

gramme.

You can cancel or modify the delay time at

any moment, before you press button 5.

Selecting the delay start :

1. Select the programme and the required

options.

2. Select the delay start by pressing button

4.

3. Press button 5:

– the machine starts its hourly count-

down.

– the programme will start after the se-

lected delay has expired.

Cancelling the Delay Start after having star-

ted the programme:

1. Set the washing machine to PAUSE by

pressing button 5.

2. Press button 4 once. On the display will

appear

'.

3. Press button 5 again to start the pro-

gramme.

ENGLISH 12

• The selected delay can be changed

only after selecting the washing pro-

gramme again.

• The door will be locked throughout

the delay time. If you need to open

the door, you must first set the wash-

ing machine to PAUSE by pressing

button 5 and wait a few minutes be-

fore opening the door. After you have

closed the door, press the same but-

ton again.

•The Delay Start cannot be selected

with the draining programme.

Start the programme by pressing button 5

To start the selected programme, press this

button; the corresponding green indicator

light stops blinking.

The indicator light 3 illuminates to indicate

that the appliance starts operating and the

door is locked.

If you have chosen a delayed start, the ma-

chine will begin the countdown.

If an incorrect option is selected, the

message Err appears on the display for

a few seconds and the red indicator light of

the button 5 blinks 3 times.

Altering an option or a running programme

It is possible to change some options before

the programme carries them out.

Before you make any change, you must

PAUSE the appliance by pressing the button

5.

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to O and then to the new pro-

gramme position. Start the new programme

by pressing the button 5 again. The washing

water in the tub will be not emptied out.

Interrupting a programme

Press the button 5 to interrupt a programme

which is running, the corresponding green in-

dicator light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to O to cancel a pro-

gramme which is running.

You can select now a new programme.

Opening the door after the programme has

started

First set the machine to pause by pressing the

button 5.

If the indicator light 3 blinks and after a few

minutes goes off, the door can be opened.

If the indicator light 3 remains lit, this means

that the machine is already heating or that

the water level is too high. In any case, do

not try to force the door open!

If you cannot open the door but you need to

open it, you have to switch the machine off

by turning the selector dial to

. After a few

minutes the door can be opened.

After closing the door, it is necessary to select

the programme and options again and to

press button 5.

Caution! Pay attention to the water

level and temperature!

At the end of the programme

The machine stops automatically. Some

acoustic signals sound and a blinking

ap-

pears on the display, the indicator light of

button 5 and the indicator light 3 go off.

If a programme or an option that ends with

water left in the tub has been selected, the

indicator light 3 remains on and the door is

locked to indicate that the water must be

emptied out before opening the door.

To empty out the water:

1.

Turn the programme selector dial to

.

2. Select the draining or spinning pro-

gramme.

3. Reduce the spin speed if needed, by

pressing button 10.

4. Press button 5.

At the end of the programme, the door is re-

leased and can be opened. Turn the pro-

gramme selector dial to

to switch the ma-

chine off.

ENGLISH 13

Remove the laundry from the drum and care-

fully check that the drum is empty. If you do

not intend to carry out another wash, close

the water tap. Leave the door open to pre-

vent the formation of mildew and unpleasant

smells.

Stand by : once the programme has finished

after a few minutes the energy saving system

will be enabled. The brightness of the display

is reduced. By pressing any button the appli-

ance will come out of the energy saving sta-

tus.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each gar-

ment label and the manufacturer’s washing

instructions. Sort the laundry as follows:

whites, coloureds, synthetics, delicates, wool-

lens.

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisable

to treat them prior to washing.

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a

stain remover product then rub in the soap

and water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and

dab the stain; treat several times.

Dried grease stains: moisten with turpentine,

lay the garment on a soft surface and dab

the stain with the fingertips and a cotton

cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since the

cellulose structure will already have been

damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well

(white cottons and fast coloureds only).

Grass: soap lightly and treat with bleach

(white cottons and fast coloureds only).

Ball point pen and glue: moisten with ace-

tone

1)

, lay the garment on a soft cloth and

dab the stain.

Lipstick: moisten with acetone as above, then

treat stains with methylated spirits. Treat any

residual marks with bleach.

Red wine: soak in water and detergent, rinse

and treat with acetic or citric acid, then rinse.

Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

1)

, then with acetic

acid; treat any residual marks on white fab-

rics with bleach and then rinse thoroughly.

Tar stains: first treat with stain remover, me-

thylated spirits or benzine, then rub with de-

tergent paste.

Degrees of water hardness

Water hardness is classified in so-called “de-

grees” of hardness. Information on hardness

of the water in your area can be obtained

from the relevant water supply company, or

from your local authority.

Characteristic

Degrees of water hardness

German °dH French °T.H.

Soft 0-7 0-15

Medium 8-14 16-25

Hard 15-21 26-37

Very hard > 21 > 37

A water softener must be added when water has a medium-high degree of hardness. Fol-

low the manufacturer’s instructions. The quantity of detergent can then always be adjus-

ted (reduced) to degree of hardness soft.

1) do not use acetone on artificial silk

ENGLISH 14

Washing programmes

Please always refer to the care label symbol of your garment and select the washing pro-

gramme based on what it says.

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

1)

Available

Options

Detergent

Compartment

COTTONS

90°-60°

White cotton (heavy-

normally soiled

items).

Main wash

Rinses

Max. final

spin at 1200

rpm

6 kg

3 kg

1)

Spin

No Spin

Rinse Hold

Economy

2)

Super Quick

Prewash

Easy Iron

Extra Rinse

3)

COTTONS

40°-30°-Cold

Coloured cotton (nor-

mally-lightly soiled

items).

Main wash

Rinses

Max. final

spin at 1200

rpm

6 kg

3 kg

1)

Spin

No Spin

Rinse Hold

Economy

2)

Super Quick

Prewash

Easy Iron

Extra Rinse

3)

SYNTHETICS

60°-40°-30°-

Cold

Synthetic or mixed

fabrics: underwear,

coloured garments,

non-shrink shirts,

blouses.

Main wash

Rinses

Max. final

spin at 900

rpm

3 kg

1.5 kg

1)

Spin

No Spin

Rinse Hold

Economy

2)

Super Quick

Prewash

Easy Iron

Extra Rinse

3)

DELICATES

40°-30°-Cold

Delicate fabrics: for

example curtains.

Main wash

Rinses

Max. final

spin at 700

rpm

3 kg

1.5 kg

1)

No Spin

Rinse Hold

Super Quick

Prewash

Extra Rinse

3)

HANDWASH

30°-Cold

Special programme

for delicate fabrics

with «hand washing»

care symbol.

Main wash

Rinses

Max. final

spin at 900

rpm

2 kg

Spin

No Spin

Rinse Hold

ENGLISH 15

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

1)

Available

Options

Detergent

Compartment

WOOL

40°

Special programme

for wool garments

bearing the «Pure

new wool, non-shrink,

appliance washable»

label.

Main wash

Rinses

Max. final

spin at 900

rpm

2 kg

Spin

No Spin

Rinse Hold

JEANS

40°

With this programme

it is possible to wash

items like pants, shirts

or jackets in denim

and also jersey real-

ized with hi-tech ma-

terials.

Main wash

Rinses

Max. final

spin at 900

rpm

3 kg

Spin

No Spin

Rinse Hold

Prewash

Extra

Rinse

4)

3)

SOAK

5)

30°

Special programme

for heavily soiled

laundry. The appli-

ance performs a soak

at 30° C. At the end

of this time the appli-

ance will stop auto-

matically with water

left in the tub. Before

starting a new wash-

ing programme, drain

the water.

Prewash

Soak for

about 40

minutes

Stop with

water in the

tub

6 kg

3)

RINSES With this programme

it is possible to rinse

and spin cotton gar-

ments which have

been washed by

hand. The appliance

performs some rinses,

followed by a final

long spin. The spin

speed can be re-

duced.

Rinses

Max. final

spin at 1200

rpm

6 kg

Spin

No Spin

Rinse Hold

Easy Iron

Extra Rinse

DRAIN For emptying out the

water of the last rinse

in programmes with

the Rinse Hold option

selected.

Draining of

water

6 kg

ENGLISH 16

Programme/

Temperature

Type of

laundry

Cycle

Description

Max. Load

Red. Load

1)

Available

Options

Detergent

Compartment

SPIN Separate spin for

hand washed gar-

ments and after pro-

grammes with the

Rinse Hold option se-

lected. You can

choose the spin

speed by pressing the

relevant button to

adapt it to the fabrics

to be spun.

Max. final

spin at 1200

rpm

6 kg

Spin

1) If you select the SUPER QUICK option, we recommend you, to reduce the maximum load as indicated. (Red. load =

reduced load). Full loading is possible however with somewhat reduced cleaning results.

2) This option is not active at a temperature lower than 40° C.

3) If using liquid detergents, a programme without PREWASH must be selected.

4) The EXTRA RINSE option will be activated automatically.

5) Refer to the detergent dispenser drawer paragraph to pour the detergent for soak programme.

Consumption values

Programme Energy consumption

(KWh)

Water consumption

(litres)

Programme dura-

tion (Minutes)

1)

White Cottons 90° 2.1 62

For the duration of

the programmes,

please refer to the

display on the

control panel.

Cottons 60° 1.3 59

Cottons 60° +

ECONOMY

2)

1.02 45

Cottons 40° 0.75 59

Synthetics 40° 0.55 45

Delicates 40° 0.55 55

Wool/ Handwash 30° 0.3 50

1) Without prewash option selected.

2) «Cottons + Economy» at 60°C with a load of 6 kg is the reference programme for the data entered in the energy label,

in compliance with CEI 456 standards.

The consumption data shown on this chart is to be considered purely indicative, as it may

vary depending on the quantity and type of laundry, on the inlet water temperature and

on the ambient temperature.

ENGLISH 17

Care and cleaning

Warning! Switch the appliance off

before you carry out any cleaning or

maintenance work.

Maintenance Wash

With the use of low temperature washes it is

possible to get a build up of residues inside

the drum.

We recommend that a maintenance wash be

performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash programme.

• Use a normal measure of detergent, must

be a powder with biological properties.

Cleaning the dispenser drawer and the

drawer recess

1

To remove the

drawer, press the

catch downwards

and pull it out.

2

To aid cleaning, re-

move also the top

part of the additive

compartment.

3

Use a stiff brush to

clean and remove

all washing powder

residue.

4 Flush out all the re-

moved parts of the

dispenser drawer

under a tap to re-

move any traces of

accumulated pow-

der.

5

Use the previous

brush to clean the

recess, ensuring that

upper and lower

part of it is well

cleaned.

After having

cleaned the dispens-

er and the drawer

recess, replace it

and run a rinse pro-

gramme without any

laundry in the drum

to flush away any

residue.

Cleaning the pump

Proceed as follows:

1

2

Open the pump

door levering on the

groove with a coin.

ENGLISH 18

2 Place a container

close to the pump

(A), to collect any

spillage.

3

Pull out the emer-

gency emptying cap

(B) from the pump

cover, using pliers.

4

1

2

When no more wa-

ter comes out, un-

screw the pump cov-

er (A) using pliers,

and remove the fil-

ter. Always keep a

rag nearby to dry

up spillage of water

when removing the

pump.

Clean the filter under a tap, to remove any

traces of fluff.

5

Remove any objects

from the pump im-

peller by rotating it.

6

Use a pencil to check whether the pump

wheel right at the back of the pump hous-

ing can turn. (It is normal for the pumping

wheel to turn jerkily.) If the pumping wheel

cannot be turned, please contact the After

Sales Service.

7

Replace the filter in-

to the pump by in-

serting it correctly

into the special

guides.

8

Screw the pump

cover firmly by turn-

ing it clockwise.

9

Replace the emer-

gency emptying cap

into the pump cover

and fix it firmly.

ENGLISH 19

10 Close the pump

door.

Cleaning the water inlet filters

If the appliance takes long to fill with water

or doesn't fill, the starting button indicator

light blinks in red. Check if the water inlet fil-

ters are blocked (see chapter "What to do

if..." for more details).

Proceed as follows:

1

• Turn off the water

tap.

• Unscrew the hose

from the tap.

•Clean the filter in

the hose with a

stiff brush.

•Screw firmly the

inlet hose back

onto the tap.

2

• Unscrew the hose from the appliance.

Keep a rag nearby because some water

may flow.

• Clean the filter in the valve with a stiff

brush or with the piece of cloth.

3

35°

45°

• Screw the hose

back to the appli-

ance turning it to

the left or the right

to suit the installa-

tion. Tight the

locknut correctly

to prevent water

leaks.

• Turn on the water

tap.

The dangers of freezing

If the appliance is exposed to temperatures

below 0°C, certain precautions should be

taken.

• Turn off the water tap.

• Unscrew the inlet hose.

• Place the end of the emergency emptying

hose and that of the inlet hose in a bowl

placed on the floor and let water drain out.

• Screw the water inlet hose back on and re-

position the emergency emptying hose af-

ter having put the cap on again.

• When you intend to start the appliance up

again, make sure that the room tempera-

ture is above 0°C.

Important! Every time you drain the water

through the emergency emptying hose you

must pour 2 litres of water into the main wash

compartment of the detergent drawer and

then run the drain programme. This will

activate the ECO VALVE device avoiding

that part of the detergent remains unused at

next washing.

Emergency emptying out

If the water is not discharged, proceed as fol-

lows to empty out the appliance:

• pull out the plug from the power socket;

• close the water tap;

• if necessary, wait until the water has

cooled down;

• open the pump door;

ENGLISH 20

La pagina sta caricando ...

IKEA RENLIGFWM Manuale utente

IKEA RENLIGFWM Manuale utente

in altre lingue

Documenti correlati