Bosch BOSCH WM Guida d'installazione
- Categoria
- Lavatrici
- Tipo
- Guida d'installazione
2
Your new washing machine
You have chosen a Bosch washing
machine.
Please take a few minutes to read and
become familiar with the advantages of
your washing machine.
To meet the high quality demands
required by Bosch, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.bosch-
home.com or contact our after-sales
service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washing machine.
Display rules
: Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■ / -
Lists are represented by a small box or
a dash.
en
3
Contents
enInstruction Manual and Installation Instructions
8 Intended use. . . . . . . . . . . . . . . . .4
( Safety instructions . . . . . . . . . . .5
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 5
7 Environmental protection . . . . . .6
Packaging/used appliance . . . . . . . . . 6
Tips on economical use . . . . . . . . . . . 6
* Familiarising yourself with your
appliance . . . . . . . . . . . . . . . . . . .8
Washing machine . . . . . . . . . . . . . . . . 8
Control panel . . . . . . . . . . . . . . . . . . . 8
Display panel . . . . . . . . . . . . . . . . . . 10
Z Laundry. . . . . . . . . . . . . . . . . . . .11
Prepare the laundry . . . . . . . . . . . . . 11
Sorting laundry . . . . . . . . . . . . . . . . . 11
Starching . . . . . . . . . . . . . . . . . . . . . 11
Dyeing/bleaching . . . . . . . . . . . . . . . 12
Soaking . . . . . . . . . . . . . . . . . . . . . . 12
C Detergent . . . . . . . . . . . . . . . . . .12
Correct selection of detergent . . . . . 12
Saving energy and detergent . . . . . . 13
0 Programme default settings . . .13
Temperature . . . . . . . . . . . . . . . . . . . 13
Spin speed . . . . . . . . . . . . . . . . . . . . 13
Finished in-time. . . . . . . . . . . . . . . . . 14
\ Additional programme settings15
Speed Eco . . . . . . . . . . . . . . . . . . . . 15
Easy-Iron. . . . . . . . . . . . . . . . . . . . . . 15
Water&Rinse+ . . . . . . . . . . . . . . . . . . 15
Prewash . . . . . . . . . . . . . . . . . . . . . . 15
1 Operating the appliance . . . . . .16
Preparing the washing machine . . . . 16
Select programme/switch on the
appliance . . . . . . . . . . . . . . . . . . . . . 16
Change the programme default settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Select additional programme settings16
Placing laundry into the drum . . . . . .16
Measure and add detergent and care
products . . . . . . . . . . . . . . . . . . . . . .17
Start the programme . . . . . . . . . . . . .18
Childlock . . . . . . . . . . . . . . . . . . . . .18
Adding laundry . . . . . . . . . . . . . . . . .18
Changing the programme . . . . . . . . .19
Cancel the programme . . . . . . . . . . .19
Programme end during rinse hold. . .19
Programme end . . . . . . . . . . . . . . . .19
Removing laundry/switching off the
appliance. . . . . . . . . . . . . . . . . . . . . .19
H Sensors . . . . . . . . . . . . . . . . . . . 20
Automatic load sensing. . . . . . . . . . .20
Unbalanced load detection system . .20
VoltCheck . . . . . . . . . . . . . . . . . . . . .20
M Setting the signal . . . . . . . . . . . 20
2 Cleaning and maintenance. . . . 21
Machine housing/control panel . . . . .21
Drum . . . . . . . . . . . . . . . . . . . . . . . . .21
Descaling . . . . . . . . . . . . . . . . . . . . .21
Detergent drawer and housing . . . . .21
Detergent solution pump blocked . . .22
The drain hose at the siphon is blocked
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Filter in the water supply blocked . . .23
3 Faults and what to do about them.
. . . . . . . . . . . . . . . . . . . . . . . . . . 24
Emergency release . . . . . . . . . . . . . .24
Information on the display panel . . . .24
Faults and what to do about them. . .25
en Intended use
4
4 After-sales service . . . . . . . . . . 27
J Technical data. . . . . . . . . . . . . . 28
5 Positioning and connecting. . . 28
Included with the appliance . . . . . . . 28
Safety instructions . . . . . . . . . . . . . . 29
Installation surface. . . . . . . . . . . . . . 29
Installation on a base or a wooden joist
floor . . . . . . . . . . . . . . . . . . . . . . . . . 29
Installation on a platform with drawer 30
Installing the appliance in a kitchenette
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Removing the transport locks . . . . . 30
Hose and cable lengths. . . . . . . . . . 31
Water inlet . . . . . . . . . . . . . . . . . . . . 31
Water outlet . . . . . . . . . . . . . . . . . . . 33
Levelling . . . . . . . . . . . . . . . . . . . . . 33
Electrical connection . . . . . . . . . . . . 34
Before washing for the first time . . . 34
Transportation . . . . . . . . . . . . . . . . . 35
8 Intended use
Intended use
■ For private domestic use only.
■ The washing machine is suitable for
washing machine-washable fabrics
and hand-washable wool in water
containing detergent.
■ To be operated with cold* mains
water or cold and hot* mains water
(max. 60 °C), and standard
detergents and care products which
are suitable for use in washing
machines.
■ When measuring out the amount of
all detergents, additives, care
products and cleaning agents,
always follow the manufacturer's
instructions.
■ The washing machine may be used
by children over the age of 8 years
and by persons with reduced
physical, sensory or mental capacity
or by persons with a lack of
experience or knowledge if they are
supervised or have been instructed
by a responsible person.
Children must not carry out any
cleaning or maintenance work
without supervision.
■ This appliance is intended for use up
to a maximum height of
4000 metres above sea level.
■ Keep children under the age of
3 years away from the washing
machine.
■ Keep pets away from the washing
machine.
Read the Instruction Manual and
Installation Instructions and all other
information supplied with the washing
machine and use the machine
accordingly.
Retain the documents for subsequent
use.
* depending on the model
Safety instructions en
5
( Safety instructions
Safety instructi ons
Electrical safety
:Warning
Danger of death!
There is a risk of electric shock
if you touch live components.
■ Never touch or hold the
mains plug with wet hands.
■ Only pull out the mains cable
by the plug and never by the
cable, as this could damage
it.
Risk of injury
:Warning
Risk of injury!
■ When the washing machine
is lifted by its protruding
parts (e.g. the washing
machine door), the
components may break off
and cause injuries.
Do not lift the washing
machine by protruding parts.
■ If you climb on the washing
machine, the worktop may
break and cause injuries.
Do not climb onto the
washing machine.
■ If you lean on the washing
machine door when it is
open, the washing machine
may tip over and cause
injuries.
Do not lean on the washing
machine door when it is
open.
■ Reaching into the drum
when it is turning can cause
injuries to hands.
Do not reach into the drum
when it is turning.
Wait until the drum has
stopped turning.
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot water e.g. if hot
water is being drained into a
wash basin.
Do not reach into the hot
detergent solution.
Safety for children
:Warning
Danger of death!
If children play with the washing
machine, they may get into life-
threatening situations or injure
themselves.
■ Do not leave children
unattended near the washing
machine.
■ Do not let children play with
the washing machine.
:Warning
Danger of death!
Children may lock themselves
in appliances, putting their lives
at risk.
For appliances that have
reached the end of their service
life:
■ Disconnect the mains plug.
en Environmental protection
6
■ Cut through the mains cable
and remove it, along with
plug.
■ Destroy the lock on the
washing machine door.
:Warning
Risk of suffocation!
Children may become wrapped in
packaging/film or packing parts if
allowed to play with them, or they may
pull them over their heads and
suffocate.
Keep packaging, film and packaging
parts out of the reach of children.
:Warning
Risk of poisoning!
Detergents and care products
may be poisonous if
consumed.
Keep detergents and care
products out of the reach of
children.
:Warning
Eye/skin irritation!
Detergents and care products
may cause irritation if they
come into contact with the eyes
or skin.
Keep detergents and care
products out of the reach of
children.
:Warning
Risk of injury!
When you wash at high
temperatures, the glass in the
washing machine door gets
hot.
Do not let children touch the
hot washing machine door.
7 Environmental
protection
Environmental protecti on
Packaging/used appliance
Tips on economical use
■ Always fill the appliance with the
maximum amount of laundry for
each programme.
Overview of programmes ~:
Supplementary sheet for the
operating and installation
instructions.
■ Wash normally soiled laundry
without a prewash.
■ Save energy and detergent when
washing lightly and normally soiled
laundry. ~ Page 13
)
Dispose of packaging in an
environmentally-responsible
manner.
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines the
framework for the return and
recycling of used appliances
as applicable throughout the
EU.
Environmental protection en
7
■ The selectable temperatures apply
to the care labels on the textiles. The
temperatures in the machine may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
■ Information about the energy
consumption*: ~ Page 10
The display provides information
about the relative energy
consumption in the selected
programs.
The more indicator lights light up,
the higher the program's
consumption.
This enables you to compare the
consumption levels of the different
programs when choosing your
program settings and to decide on
an energy- and water-saving
program setting.
*depending on the model
■ Energy-saving mode: The display
panel lighting goes out after a few
minutes and the A button flashes.
Press any button to activate the
lighting.
Energy-saving mode is not activated
if a programme is running.
■ If the laundry is subsequently dried
in a tumble dryer, select the spin
speed according to the tumble dryer
manufacturer's instructions.
en Familiarising yourself with your appliance
8
* Familiarising yourself with your appliance
Familiari sing yourself with your appliance
Washing machine
Control panel
Control panel depends on the model
6 7
#
( Detergent drawer ~ Page 17
0 Operating/display panel
8 Door with door handle
9S Open the door
9T Close the door
@ Service flap
Familiarising yourself with your appliance en
9
*depending on the model
#
+
3
;
C
#
+
3
;
C
( Program selector
for selecting a program and
switching the machine on and off
via the Off position;
You can find an overview of all
programs on the supplementary
sheet for the installation and
operating instructions.
0 Change Temperature *.
~ Page 13
8 Change Spin speed. ~ Page 13
@ Change Finished in-time.
~ Page 14
H Childlock (E 3 sec., E 3 δευτ.)
to prevent the set functions from
being changed accidentally;
~ Page 18
To do so, press Spin speed and
Finished in-time simultaneously
for approx. 3 seconds.
P Select additional program
settings if necessary: ~ Page 15
■ Speed Eco
■ Water&Rinse+ *
■ Easy-Iron *
■ Prewash *
X A button for:
■ Starting a program
■ Interrupting a program, e.g. to
add items of laundry
~ Page 18
■ Cancelling a program
~ Page 19
` Display panel for settings and
information ~ Page 10
en Familiarising yourself with your appliance
10
Display panel
Note: You will find settings and
information for the selected program in
the table.
*depending on the model
** depending on the selected program,
settings and model
' - 90 °C Temperature* in °C;
' = cold
- - - -, 0 - 1400** 0 Spin speedin rpm,
0 = no spin cycle,
draining only
~ Page 13,
= Rinse Stop
~ Page 13
e.g. 2:30; Finished in-time
Program duration
depends on the
program selection in
h:min
(hours:minutes),
1 - 24 ñ End time
preselection in
hours;
End of program after
... hours
9** kg Load
recommendation
é { { { { { Energy
consumption
display~ Page 7
The more indicator
lights light up, the
higher the relative
energy
consumption.
More information on the display panel
Program progress:
ß Washing
à Rinse
0 Spin
End Program end
- - - - 0 Program end during Rinse Stop
Washing machine door:
è
lights up
The washing machine door cannot
be opened.
è
flashes
When the program has started: The
washing machine door is not closed
properly.
Tap:
r
flashes
Tap not turned on, no water pressure
r
lights up
Water pressure too low (may
increase the program duration)
Childproof lock: ~ Page 18
E
lights up
Childproof lock activated
E
flashes
Childproof lock activated, program
selector adjusted
Foam detection:
Å
lights up
~ Page 18
Fault display:
E: - - ~ Page 24
Signal setting:
0 - 4 ~ Page 20
Laundry en
11
Z Laundry
Laundry
Prepare the laundry
Caution!
Damage to the appliance/fabrics
Foreign objects (e.g. coins, paperclips,
needles, nails) may damage the laundry
or components in the washing machine.
You should therefore note the following
tips when preparing your laundry:
■ Empty any pockets.
■ Look out for metal items (paperclips,
etc.) and remove them.
■ Wash delicates in a laundry bag
(tights, underwired bras, etc.).
■ Close any zips; button up any cover
buttons.
■ Brush sand out of pockets and
collars.
■ Remove curtain fittings or place
curtains in a laundry bag.
Sorting laundry
Sort your laundry according to the care
instructions and manufacturer's
information on the care labels,
depending on:
■ Type of fabric/fibre
■ Colour
Note: Laundry can discolour or not
be cleaned correctly. Wash white
and coloured items separately.
Wash new coloured items separately
the first time you wash them.
■ Soiling
Wash laundry with the same level of
soiling together.
Some examples of soiling levels can
be found on ~ Page 13.
– Light: Do not prewash, select the
Speed setting if necessary
– Normal
– Heavy: Load less laundry, select
a program with prewash
– Stains: Remove/pretreat stains
while they are fresh. Firstly, dab
with soapy water; do not rub.Then
wash the items of laundry with
the appropriate program.
Stubborn or dried-in stains can
sometimes only be removed by
washing several times.
■ Symbols on the care labels
Note: The numbers in the symbols
indicate the maximum washing
temperature that may be used.
Starching
Note: Laundry should not be treated
with fabric softener.
Liquid starch can be used to stiffen
fabrics particularly in the Rinse and
Cottons programmes. Measure starch
into compartment M in accordance with
the manufacturer's instructions (clean
first if necessary).
M Suitable for normal washing
process;
e.g. Cottons program
N A gentle washing process is
required;
e.g. Easy-Care program
O An especially gentle washing
process is required; e.g.
Delicate/Silk program
W Suitable for washing by hand;
e.g. W Wool program
Ž Do not machine wash.
en Detergent
12
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
Soaking
1. Switch on the appliance.
2. Select the i Cottons 20 °C
program.
3. Pour soaking agent/detergent into
compartment II in accordance with
the manufacturer’s instructions.
4. Press the A button.
5. After approx. 10 minutes, press the
A button to pause the program.
6. Leave the laundry to soak for as long
as required, then either press the A
button again to continue the
program or change the program.
Notes
■ Load laundry of the same colour.
■ No additional detergent is required;
the soaking solution is used for
washing.
C Detergent
Detergent
Correct selection of detergent
The care label is crucial for selecting
the correct detergent, temperature and
treatment of the laundry. ~ See also
www.sartex.ch
If you visit www.cleanright.eu, you will
find further information on detergents,
care products and cleaning agents for
domestic use.
■ Standard detergent with optical
brighteners
Suitable for boil-washable white
laundry made from linen or cotton
Programme: Cottons/
cold - max. 90 °C
■ Detergent for colours without
bleach or optical brighteners
Suitable for coloured laundry made
from linen or cotton
Programme: Cottons/
cold - max. 60 °C
■ Detergent for colours/delicates
without optical brighteners
Suitable for coloured laundry made
from easy-care fibres, synthetic
fibres
Programme: Easy-Care/
cold - max. 60 °C
■ Detergent for delicates
Suitable for delicate, fine fabrics, silk
or viscose
Programme: Delicate/Silk/
cold - max. 40 °C
■ Detergent for woollens
Suitable for wool
Wool programme/
cold - max. 40 °C
Programme default settings en
13
Saving energy and detergent
For light and normal soiling, you can
save energy (lower washing
temperature) and detergent.
Note: When measuring the amount of
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information. ~ Page 17
0 Programme default
settings
Programme default settings
The default program settings are
displayed on the display panel once the
program has been selected.
You can change the default settings.
To do this, repeatedly press the
corresponding button until the required
setting value is displayed on the display
panel.
Note: Pressing and holding the button
will allow you to automatically scroll
through all the setting values to the last
value. Pressing it again will allow you to
change the setting values again.
You can find an overview of all possible
program settings on the supplementary
sheet for the installation and operating
instructions.
Temperature
(°C, Temp. °C, Θερμοκρ. °C)
Button depending on the model
Depending on what stage the program
is in, you can change the set
temperature before and during the
program.
The maximum temperature that can be
set depends on the program that has
been selected.
Spin speed
(0, 0 rpm, Στροφές 0)
Depending on how far through the
program the appliance is, you can
change the spin speed (in rpm –
revolutions per minute) before and
during the program.
Setting 0: No final spin; the water is
simply pumped out. The laundry stays
Saving Soiling/note
Reduced temper-
ature and deter-
gent quantity as
per the recom-
mended dosage
Light
No visible dirt or stains. Cloth-
ing has taken on some body
odour, e.g.:
■ Light summer/sports
clothing (worn for a few
hours)
■ T-shirts, shirts, blouses
(worn for up to one day)
■ Guest bed linen and hand
towels (used for one day)
Normal
Visible dirt or a few light
stains, e.g.:
■ T-shirts, shirts, blouses
(sweat soaked, worn a
few times)
■ Towels, bedding (used for
up to one week)
Temperature as
per the care label
and detergent
quantity as per
the recom-
mended dosage
for heavy soiling
Heavy
Dirt and/or stains clearly visi-
ble, e.g. tea towels, baby
items, work clothing
en Programme default settings
14
wet inside the drum, e.g. for items that
are not to be spun.
- - - - setting: Rinse Stop = no final spin;
the laundry stays in the water after the
final rinse.
You can select "Rinse Stop" to prevent
creasing if the laundry will not be taken
out of the washing machine immediately
after the program has ended.
To resume/end the program
~ Page 19
The maximum speed that can be set
depends on the model and the program
that has been selected.
Finished in-time
(ñ, Λήξη σε ñ)
Before starting the program, you can
preselect the program end time ("Ready
in" time) in hourly increments (h = hour),
up to a maximum of 24 hours.
To do this:
1. Select a program.
The program duration will be
displayed for the selected program,
e.g. 2:30 (hours:minutes).
2. Press the Finished in-time button
repeatedly until the required number
of hours is displayed.
3. Press the A button.
The program will now start.
The selected number of hours (e.g. 8
h) is shown on the display panel and
counts down until the wash program
starts. The duration of the program
will then be displayed.
Note: The program duration is
automatically adjusted when the
program is running.
Certain factors can affect the program
duration, e.g.:
■ Program settings,
■ Detergent dosage (additional rinse
cycles may be required due to
foaming),
■ Load size/type of fabrics (water
absorption differs),
■ Imbalances (e.g. due to fitted
sheets) are eliminated by rotating
the drum briefly several times,
■ Fluctuations in power supply,
■ Water pressure (inflow rate).
Once the program has been started,
you can change the preselected
number of hours as follows:
1. Press the A button.
2. Use the Finished in-time button to
change the number of hours.
3. Press the A button.
Once the program has been started,
you can add more laundry or remove
laundry as required. ~ Page 18
Additional programme settings en
15
\ Additional programme
settings
Additional programme settings
You can find an overview of all the
possible additional settings on the
printed supplement for the installation
and operating instructions.
The settings vary depending on the
model.
Speed Eco
(G F , Speed/Eco, Speed Eco
Perfect)
Button with two possible settings for
adapting the selected program:
■ Speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected program,
without the Speed Eco setting.
Note: Do not exceed the maximum
load.
■ Eco
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
program, without the Speed Eco
setting.
Press the button to do this. First of all,
you can select the Speed setting. If you
press the button again, the Eco setting
is active. The respective symbol is
shown in the display when the setting is
activated.
If you press the button again, no setting
is active.
Easy-Iron
(Q)
Button depends on the model
Reduces creasing by means of a
special spin sequence followed by
fluffing and reduced spin speed.
Note: The laundry retains an elevated
level of residual moisture.
Water&Rinse+
(', Water Plus Z, Aqua Plus, Rinse
Plus ', Περισσότ. νερό)
Button depends on the model
Higher water level and additional rinse
cycle for particularly sensitive skin and/
or for areas with very soft water.
Prewash
(T, Πρόπλυση)
Button depending on the model
For heavily soiled laundry.
Note: Pour detergent into
compartments I and II.
en Operating the appliance
16
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~ Page 28
1. Connect the mains plug.
2. Turn on the water tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note: If you have activated the
childproof lock, you must first deactivate
it, before you can set a program.
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
The program default settings for the
selected program appear in the display
panel:
■ Temperature*,
■ The maximum load and the duration
of the program (alternately)
■ Energy consumption*.
*depending on the model
Change the programme
default settings
You can use or change the default
settings for this wash cycle.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
The settings are not retained after the
washing machine is switched off.
Default program settings ~ Page 13
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to the
items of laundry you are washing.
The settings can be selected or
deselected depending on how far the
program has progressed.
The button indicator lights will be lit if a
setting has been activated.
The settings are not retained after the
washing machine is switched off.
Additional program settings
~ Page 15
Placing laundry into the drum
:Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse items of laundry thoroughly
beforehand.
Operating the appliance en
17
Notes
■ Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual items of
laundry may lead to imbalances.
■ Observe the specified maximum
load. Overfilling has a negative
impact on the washing result and
promotes creasing.
1. Place presorted items of laundry
unfolded in the washing drum.
2. Make sure that no items of laundry
are trapped between the washing
machine door and the rubber seal,
and close the door.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Dosing
Dose the detergents and care products
according to:
■ Water hardness (ask your water
supply company)
■ The manufacturer's instructions on
the packaging
■ The amount of laundry
■ Soiling ~ Page 13
Filling
:Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes/skin thoroughly if they come
into contact with detergents or care
products.
If swallowed accidentally, seek medical
advice.
Note: Dilute viscous fabric softener and
fabric conditioner with water to prevent
blockages.
Pour the detergent and care products
into the appropriate compartments:
1. Pull out the detergent drawer as far
as possible.
2. Add detergent and/or care products.
3. Close the detergent drawer.
Measuring aid* for liquid detergent
Position the measuring aid for dosing
the correct amount of liquid detergent:
Measuring aid A for liquid detergent
Dispenser II Detergent for the main wash,
water softener, bleach, stain
remover
Dispenser i Softener, starch,
do not exceed max.
Dispenser I Detergent for prewash
en Operating the appliance
18
1. Pull out the detergent drawer.Press
down the insert and fully remove the
drawer.
2. Slide the measuring aid forwards,
fold it down and click it into place.
3. Reinsert the drawer.
Note: Do not use the measuring aid for
gel detergents and washing powder, or
for programs with prewash or when the
Ready in time is selected.
Start the programme
Press the A button. The indicator lamp
lights up and the program starts.
The display panel shows the Ready in
time while the program is running or the
program duration and the program
progress symbols once the wash cycle
has started.
Display panel ~ Page 10
Note: Foam detection
If the Å symbol also lights up in the
display panel, the washing machine has
detected too much foam during the
wash cycle and automatically activated
additional rinse cycles to remove the
foam.
Add less detergent to the next wash
cycle with the same load.
If you want to lock the program to
prevent it from being inadvertently
adjusted, you can select the childproof
lock as follows.
Childlock
(E 3 sec., E 3 δευτ.)
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock once the
programme has started.
To activate/deactivate, press and hold
the Spin speed and Finished in-time
buttons at the same time for approx.
3 seconds. The E symbol will appear
on the display panel.
■ E lit up: The childproof lock is
active.
■ E flashing: The childproof lock is
active and the programme selector
has been adjusted. To deactivate the
childproof lock, reset the
programme selector to the initial
programme. The symbol will light up
again.
Note: Do not turn the program
selector beyond the "off" position,
otherwise the programme will stop.
Note: The childproof lock remains
active after the appliance is switched
off. You must deactivate the childproof
lock whenever you want to start a new
programme.
Adding laundry
Once the programme has been started,
you can add more laundry or remove
laundry as required.
Press the A button to do this.
The A button indicator light will flash
and the machine will check whether it is
possible to add more laundry.
If
■ the è symbol goes out on the
display panel, it is possible to add
more laundry.
Operating the appliance en
19
■ the è symbol lights up on the
display panel, it is not possible to
add more laundry.
To resume the programme, press the
A button. The programme will resume
automatically.
Notes
■ Do not leave the door open for too
long when adding more laundry as
water from the laundry may leak out.
■ For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add more laundry during this time.
Changing the programme
1. Press the A button.
2. Select a different program.
3. Press the A button.This starts the
new program from the beginning.
Cancel the programme
For programs at high temperature:
1. Press the A button.
2. To cool down laundry: Select '
Rinse.
3. Press the A button.
For programs at low temperature:
1. Press the A button.
2. Select 0 Spin/Drain//Spin/Empty
[.
3. Press the A button.
Programme end during rinse
hold
- - - - 0 appears in the display panel and
the indicator lamp of the A button
flashes.
Continue the program by:
■ Pressing the A button or
■ Selecting a spin speed or setting the
program selector to 0 Spin/Drain//
Spin/Empty [ and then pressing
the A button.
Programme end
End appears on the display panel and
the A button indicator light is off.
Removing laundry/switching
off the appliance
1. Open the door and remove the
laundry.
2. Turn the program selector to Off .
The appliance is switched off.
3. Turn off the tap.
Note: Not required for Aqua-Stop
models.
Notes
■ Do not leave any items of laundry in
the drum.They may shrink in the next
wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■ Wipe the rubber seal dry.
■ Leave the door and detergent
drawer open so that any residual
water can evaporate.
■ Always wait until the program ends,
as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
■ If the display panel goes off at the
end of a program, the energy-saving
mode is active.Press any button to
activate the panel.
en Sensors
20
H Sensors
Sensors
Automatic load sensing
The automatic load sensing function
adapts the water consumption ideally to
each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Note: Place large and small items of
laundry evenly in the drum. ~ Page 25
VoltCheck
depending on the model
The automatic voltage control system
detects an unauthorised voltage under-
usage. The colon on the Ready in
display is flashing. ~ Page 10
Once the supply voltage is stable again,
the colon of the Ready in display lights
up (Normal mode).
The detected voltage under-usage is
indicated in the further program
sequence by all three points lighting up
in the display.
Note: Voltage under-usages can for
example result in program extensions
and/or a non-satisfactory spin result.
M Setting the signal
Setting the signal
You can change the following settings:
■ The volume of the buttons and
information signals (e.g. at the end
of the program) and/or
■ The volume of the button signals.
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
1. Select the i Cottons program to
position 1. The washing machine is
switched on.
2. Press the A button and, at the
same time, turn the program selector
clockwise to position 2.Release the
button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel
(e.g. at the end of the program).
Changing the volume
Use the Finished in-time + or - button
to change the following settings at the
corresponding program selector
positions:
■ 2: The volume of the information
signals and/or
■ 3: The volume of the button signals.
Exiting setting mode
You can now end the process and set
the program selector to the Off position.
The settings are saved.
0 = off, 1 = quiet,
2 = medium, 3 = loud,
4 = very loud
3RVLWLRQV
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Bosch BOSCH WM Guida d'installazione
- Categoria
- Lavatrici
- Tipo
- Guida d'installazione
in altre lingue
- English: Bosch BOSCH WM Installation guide