Panasonic XLR Microphone Adaptor Manuale utente

Categoria
Microfoni
Tipo
Manuale utente
Operating Instructions
Manuel d’utilisation
使用说明书
XLR Microphone Adaptor
Adaptateur de microphone XLR
XLR 麦克风适配器
DMW-XLR1
Model No.
Modèle
型号
DVQX1208ZA
F0217WT0
If you have any questions, visit:
USA : http://shop.panasonic.com/support
Canada : www.panasonic.ca/english/support
Pour toute assistance supplémentaire, visiter :
www.panasonic.ca/french/support
Please read these instructions carefully
before using this product, and save this
manual for future use.
Veuillez lire attentivement les présentes
instructions avant d’utiliser ce produit, et
conserver ce manuel pour utilisation ultérieure.
请于使用前仔细阅读操作使用说明书,
并将说明书妥善保管,以备将来使用。
E
PP
GK
DMW-XLR1PP&E&GK-DVQX1208ZA.book 1 ページ 2017年2月6日 月曜日 午後5時11
DVQX1208 (ENG)
2
Operating Instructions
XLR Microphone Adaptor
Thank you for purchasing Panasonic product.
Please read these instructions carefully before using this
product, and save this manual for future use.
Contents
Information for Your Safety.......................................... 2
Precautions.................................................................. 4
Supplied Accessories .................................................. 4
Names of Parts............................................................ 5
Attaching to the Camera .............................................. 6
Connecting a microphone............................................ 6
Using the XLR microphone adaptor............................. 7
Cautions for Use .......................................................... 9
Specifications............................................................. 10
Limited Warranty (ONLY FOR U.S.A.) ...................... 11
Limited Warranty (ONLY FOR CANADA).................. 13
Information for Your Safety
CAUTION!
To reduce the risk of fire, electric shock or product
damage,
• Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit
is well ventilated.
ENGLISH
DMW-XLR1PP&E&GK-DVQX1208ZA.book 2 ページ 2017年2月6日 月曜日 午後5時11
3
(ENG) DVQX1208
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
THE FOLLOWING APPLIES ONLY IN CANADA.
-If you see this symbol-
FCC Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded
interface cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: http://shop.panasonic.com/support
CAN ICES-3(B)/NMB-3(B)
Disposal of Old Equipment
Only for European Union and countries with
recycling systems
This symbol on the products, packaging, and/
or accompanying documents means that used
electrical and electronic products must not be
mixed with general household waste.
For proper treatment, recovery and recycling
of old products, please take them to applicable collection
points in accordance with your national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
DMW-XLR1PP&E&GK-DVQX1208ZA.book 3 ページ 2017年2月6日 月曜日 午後5時11
DVQX1208 (ENG)
4
Precautions
This unit is an XLR microphone adaptor for Panasonic
digital cameras.
Attaching a commercially available XLR microphone and
combining it with a compatible digital camera enables
recording of high-quality stereo audio.
This unit supports high-resolution audio output. Attaching it
to a compatible digital camera enables recording of high-
resolution audio.
Compatible devices (As of February 2017)
Compatible devices: DC-GH5
For the latest information on compatible devices, see the
operating instructions, catalogue or website of the digital
camera.
http://panasonic.jp/support/global/cs/dsc/
Handling the unit
Do not subject the unit to strong vibration or impact.
Those actions may result in malfunctions and failure.
Sand and dirt may cause the unit to malfunction. When
using the unit in an environment such as a beach, take
steps to protect it from sand and dirt.
When using the unit on rainy days or on a beach, take
care to keep the unit dry.
This unit is neither dust-proof nor splash-proof. If by any
chance water droplets, etc. are splashed on the unit, wipe
them off with a dry cloth. If the unit fails to function
correctly, consult your dealer or Panasonic.
Please also read the manual of your digital camera.
Supplied Accessories
Product numbers correct as of February 2017. These may
be subject to change.
1 Soft case
2 Cable holder
This is attached to the unit at the time of purchase.
DVPY1001Z DVGE1055Z
12
DMW-XLR1PP&E&GK-DVQX1208ZA.book 4 ページ 2017年2月6日 月曜日 午後5時11
5
(ENG) DVQX1208
Names of Parts
1 LINE/MIC/i48V switch (INPUT1)
2 GAIN switch (INPUT1)
3 LOW CUT switch (INPUT1)
4 GAIN switch (INPUT2)
5 LOW CUT switch (INPUT2)
6 LINE/MIC/i48V switch (INPUT2)
7 AUDIO LEVEL dial (INPUT2)
8 ALC switch
9 CH1/2 switch
: AUDIO LEVEL dial (INPUT1)
; Accessory shoe
< POWER lamp
= Lock lever
> Hot shoe mount
? Release lever
@ Cable holder
A XLR terminal (INPUT1)
B XLR terminal (INPUT2)
DMW-XLR1PP&E&GK-DVQX1208ZA.book 5 ページ 2017年2月6日 月曜日 午後5時11
DVQX1208 (ENG)
6
Attaching to the Camera
Confirm that the camera is off. Attaching or removing the
XLR microphone adaptor while the camera is on may result
in malfunction.
1 Slide the lock lever in
the direction opposite to
that indicated by the
[LOCK 1] icon (1).
2 Slide the XLR
microphone adaptor into
the hot shoe until it
clicks securely into place
(2).
3 Slide the lock lever to the
[LOCK 1] position (3).
To remove the XLR microphone adaptor, slide the lock
lever in the direction opposite to the [LOCK 1] arrow and
slide it from the hot shoe.
Connecting a microphone
Insert the microphone
cable plug into the XLR
terminal of the unit.
To prevent unnecessary force
being applied to the digital
camera hot shoe, insert the
plug while holding the unit with your hand.
If there is only one cable to be connected, connect it to
terminal [INPUT1].
Use a shielded XLR microphone cable with a XLR (3 pin)
terminal.
The microphone cable can be
attached to the unit’s cable holder.
The orientation of the cable holder
can be changed. Remove the
cable holder and attach it in a
different orientation.
Keep the cable holder out of
reach of children to prevent
swallowing.
DMW-XLR1PP&E&GK-DVQX1208ZA.book 6 ページ 2017年2月6日 月曜日 午後5時11
7
(ENG) DVQX1208
A commercially available XLR
microphone or microphone
holder can be attached to the
unit’s accessory shoe.
Remove the microphone cable
Press the release lever
(1), and hold the plug to
remove it (2).
Using the XLR
microphone adaptor
This unit can be used by turning the power of the digital
camera [ON] while this unit is mounted on the digital
camera.
The POWER lamp of the unit will turn on.
The operational sound of the switch operation may be
recorded or the sound may get interrupted, such as when
the switch is operated during the recording of a motion
picture.
Setting the recording level
Set the recording level of audio that is input to the XLR
terminals (INPUT1, INPUT2).
The recording level of the built-in microphone of the digital
camera and the [MIC] terminal cannot be set.
1 Slide the ALC switch to
[OFF].
2 Rotate the
AUDIO LEVELdial
(INPUT1, INPUT2) to set
the recording level
(volume).
Setting the level while checking with headphones
connected to the digital camera or the digital camera
microphone level display is recommended.
Adjust the recording level automatically.
Slide the ALC switch to [ON]. At high volumes, the
recording level is decreased automatically to reduce
distortion with the sound.
Decrease noise caused by wind or handling
Noise caused by wind or handling is reduced by cutting out
low-frequency components that are input to the XLR
terminals (INPUT1, INPUT2).
Set the LOW CUT switch
(INPUT1, INPUT2) to [16Hz]
or [160Hz].
Select based on the type of
noise.
DMW-XLR1PP&E&GK-DVQX1208ZA.book 7 ページ 2017年2月6日 月曜日 午後5時11
DVQX1208 (ENG)
8
Using external audio
devices
1 Set the LINE/MIC/i48V
switch (INPUT1, INPUT2)
to match the connected
device.
Set the switch to the match the device connected to the
XLR terminals (INPUT1, INPUT2).
When set to [i48V], connecting a device that does not
support i48V power supply may cause damage to the
connected device. Check the device before
connecting.
If noise from the unconnected terminal is bothering, set
the LINE/MIC/i48V switch to [LINE].
2 (When [MIC], [i48V] is
set) Set the input level
with the GAIN switch
(INPUT1, INPUT2).
When the LINE/MIC/i48V switch is set to [MIC] or
[i48V], the input gain can be changed with the GAIN
switch.
If the LINE/MIC/i48V switch is set to [LINE], the input
gain cannot be changed.
3 Set the recording
channel with the CH1/2
switch.
If using a stereo microphone with two XLR (3 pin)
plugs, connect the Lch to XLR terminal (INPUT1), and
the Rch to XLR terminal (INPUT2), and set the CH1/2
switch to [INPUT 1/2].
[LINE] External audio devices (such as mixers).
[MIC]
Dynamic microphone or microphone with
built-in battery.
[i48V]
Microphone that supports i48V power
supply (phantom power supply).
[i20] i20 dB
[0]
0dB
(Default setting, standard level: j40 dBu)
[j20] j20 dB
Settings Audio recorded with CH1/CH2
[INPUT 1/1] INPUT1
CH1
CH2
[INPUT 1/2]
INPUT1 CH1
INPUT2 CH2
DMW-XLR1PP&E&GK-DVQX1208ZA.book 8 ページ 2017年2月6日 月曜日 午後5時11
9
(ENG) DVQX1208
Cautions for Use
About the unit
Do not use this unit near radio transmitters or high-
voltage lines.
Noise may be present in images and sound recorded near
radio transmitters or high-voltage lines. Perform recording
in locations away from them. The level of noise varies
depending on the XLR microphone used.
Keep the unit away from insecticide sprays and other
volatile substances.
Exposure to such substances may cause damage to the
external case and the text and symbols printed on the unit.
Do not leave the unit in contact with any items made of
rubber or PVC for prolonged periods of time.
Do not carry the unit with your hands while it is still
attached to a digital camera.
Under no circumstances should the unit be used or stored
in any of the following locations since doing so may cause
trouble in operation or malfunctioning:
– In direct sunlight or on a beach in summer
– In locations with high temperatures and humidity levels or
where changes in temperature and humidity are acute
– In locations with high concentrations of sand, dust or dirt
– Where there is fire
– Near heaters, air conditioners or humidifiers
Where water may make the unit wet
– Where there is vibration
– Inside a vehicle
Do not drop the unit, knock it into other objects or subject
it to any other kind of strong impact or shock.
When recording a motion picture, the digital camera or
lens sounds or other operating noise may be recorded. If
the sound from the lens is particularly bothering, set the
camera to manual focus during use. If the operating noise
is particularly bothering, position the microphone away
from the digital camera during use.
If the terminals are dirty they can cause faulty
connections. Wipe clean with a soft dry cloth before
connecting.
Do not attach or remove cables with the power of the
digital camera turned [ON].
Before use, check that the XLR microphone adaptor is
recording normally.
Do not disassemble or modify this unit.
Cleaning
When cleaning, wipe the unit with a dry soft cloth.
When the unit is soiled badly, it can be cleaned by wiping
the dirt off with a wrung wet cloth, and then with a dry
cloth.
Do not use solvents such as benzine, thinner, alcohol,
kitchen detergents, etc., to clean the unit, as these may
damage the external case and the text and symbols
printed on the unit.
When using a chemical cloth, be sure to follow the
accompanying instructions.
DMW-XLR1PP&E&GK-DVQX1208ZA.book 9 ページ 2017年2月6日 月曜日 午後5時11
DVQX1208 (ENG)
10
Specifications
Specifications are subject to change without notice.
The symbols on this product (including the accessories)
represent the following:
Input terminal INPUT1 terminal,
INPUT2 terminal: XLR3-pin, female
Standard input
level
LINE: 0 dBu
MIC, _48V: j40 dBu
(0 dBu=0.775 Vrms)
Standard
recording level
j12 dBFS (at the standard input)
Frequency
characteristic
20 Hz to 20 kHz,
_
0/
j
1dB (Fs=48kHz)
20 Hz to 40 kHz,
_
0/
j
1dB (Fs=96kHz)
GAIN switch _20, 0, j20 dB
LOW CUT switch
160 Hz, 16 Hz, OFF (cutoff frequency)
Dimensions Approx. 64.4 mm (W)k60.9 mm
(H)k81.8 mm (D)
[2.535q (W)k2.397q (H)k3.220q(D)]
(excluding the projecting parts)
Mass (weight) Approx. 173 g/0.381 lb
Operating
temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating
humidity
10%RH to 80%RH
DC
For the U.S.A.
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
http://shop.panasonic.com
For CANADA
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.com
Printed in China
DMW-XLR1PP&E&GK-DVQX1208ZA.book 10 ページ 2017年2月6日 月曜日 午後5時11分
11
(ENG) DVQX1208
Limited Warranty
(ONLY FOR U.S.A.)
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA Only)
If your product does not work properly because of a defect
in materials or workmanship, Panasonic Corporation of
North America (referred to as “the warrantor”) will, for the
length of the period indicated on the chart below, which
starts with the date of original purchase (“warranty period”),
at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished
equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the
warrantor.
During the “Labor” warranty period there will be no charge
for labor. During the “Parts” warranty period, there will be no
charge for parts. This Limited Warranty excludes both parts
and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to
products purchased and serviced in the United States. This
warranty is extended only to the original purchaser of a new
product which was not sold “as is”.
Mail-In Service
--Online Repair Request
Online Repair Request
To submit a new repair request and for quick repair status
visit our Web Site at http://shop.panasonic.com/support
.
When shipping the unit, carefully pack, include all supplied
accessories listed in the Owner’s Manual, and send it
prepaid, adequately insured and packed well in a carton
box. When shipping Lithium Ion batteries please visit our
Web Site at
http://shop.panasonic.com/support
as Panasonic is
committed to providing the most up to date information.
Include a letter detailing the complaint, a return address and
provide a daytime phone number where you can be
reached. A valid registered receipt is required under the
Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY
PERIOD, THE PURCHASER WILL BE REQUIRED TO
FURNISH A SALES RECEIPT/PROOF OF PURCHASE
INDICATING DATE OF PURCHASE, AMOUNT PAID AND
PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED
WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits and Exclusions
This warranty ONLY COVERS failures due to defects in
materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages which occurred in shipment,
or failures which are caused by products not supplied by the
warrantor, or failures which result from accidents, misuse,
abuse, neglect, mishandling, misapplication, alteration,
faulty installation, set-up adjustments, misadjustment of
Product or Part Name Parts Labor
Digital Camera Peripherals 1 Year 1 Year
Digital Camera Accessories 90 Days 90 Days
Rechargeable Batteries 1 Year 1 Year
DMW-XLR1PP&E&GK-DVQX1208ZA.book 11 ページ 2017年2月6日 月曜日 午後5時11分
DVQX1208 (ENG)
12
consumer controls, improper maintenance, power line
surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office,
restaurant, or other business or rental use of the product, or
service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to
acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS
LISTED UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to
and from the servicer, loss of or damage to media or
images, data or other memory or recorded content. The
items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY,
ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the exclusions may not
apply to you.
This warranty gives you specific legal rights and you may
also have other rights which vary from state to state. If a
problem with this product develops during or after the
warranty period, you may contact your dealer or Service
Center. If the problem is not handled to your satisfaction,
then write to:
Consumer Affairs Department
Panasonic Corporation of North America
661 Independence Pkwy
Chesapeake, VA 23320
PARTS AND SERVICE, WHICH ARE NOT COVERED BY
THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
As of March 2016
DMW-XLR1PP&E&GK-DVQX1208ZA.book 12 ページ 2017年2月6日 月曜日 午後5時11分
13
(ENG) DVQX1208
Limited Warranty (ONLY FOR CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free
from defects in material and workmanship under normal use
and for a period as stated below from the date of original
purchase agrees to, at its option either (a) repair your
product with new or refurbished parts, (b) replace it with a
new or a refurbished equivalent value product, or (c) refund
your purchase price. The decision to repair, replace or
refund will be made by Panasonic Canada Inc.
This warranty is given only to the original purchaser, or the
person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized
Panasonic dealer in Canada and purchased and used in
Canada, which product was not sold “as is”, and which
product was delivered to you in new condition in the original
packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY
SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE,
SHOWING AMOUNT PAID AND PLACE OF PURCHASE
IS REQUIRED
Digital Camera One (1) year, parts and labour
Digital Camera
Peripherals
One (1) year, parts and labour
Digital Camera
Accessories
Ninety (90) days, parts and
labour
DMW-XLR1PP&E&GK-DVQX1208ZA.book 13 ページ 2017年2月6日 月曜日 午後5時11分
DVQX1208 (ENG)
14
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in
materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages which occurred in shipment,
or failures which are caused by products not supplied by
Panasonic Canada Inc., or failures which result from
accidents, misuse, abuse, neglect, mishandling,
misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper
maintenance, improper batteries, power line surge, lightning
damage, modification, introduction of sand, humidity or
liquids, commercial use such as hotel, office, restaurant, or
other business or rental use of the product, or service by
anyone other than a Authorized Servicer, or damage that is
attributable to acts of God.
Dry cell batteries, printer ink cartridge and paper are also
excluded from coverage under this warranty.
Rechargeable batteries are warranted for ninety (90) days
from date of original purchase.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL PANASONIC CANADA
INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT OR ARISING OUT OF ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.
(As examples, this warranty excludes damages for lost
time, travel to and from the Authorized Servicer, loss of or
damage to media or images, data or other memory or
recorded content. This list of items is not exhaustive, but for
illustration only.)
In certain instances, some jurisdictions do not allow the
exclusion or limitation of incidental or consequential
damages, or the exclusion of implied warranties, so the
above limitations and exclusions may not be applicable.
This warranty gives you specific legal rights and you may
have other rights which vary depending on your province or
territory.
WARRANTY SERVICE
For product operation, repairs and information
assistance, please visit our Support page:
www.panasonic.ca/english/support
DMW-XLR1PP&E&GK-DVQX1208ZA.book 14 ページ 2017年2月6日 月曜日 午後5時11分
15
(FRE) DVQX1208
Manuel d’utilisation
Adaptateur de microphone XLR
Merci d'avoir fait l'achat d'un produit Panasonic.
Il est recommandé de lire attentivement ce manuel avant
d’utiliser l’appareil et de le conserver pour consultation
ultérieure.
Table des matières
Précautions à prendre................................................15
Précautions ................................................................ 16
Accessoires fournis.................................................... 16
Noms des éléments ...................................................17
Installation sur l'appareil photo ..................................18
Raccordement d'un microphone ................................18
Utilisation de l'adaptateur de microphone XLR..........19
Précautions à prendre................................................21
Spécifications.............................................................22
Garantie limitée.......................................................... 23
Précautions à prendre
CE QUI SUIT NE S’APPLIQUE QU’AU CANADA.
-Si ce symbole apparaît-
ATTENTION!
Afin d’éviter tout risque d’incendie, de choc
électrique ou de dommage à l’appareil :
N’installez pas ou ne placez pas cet appareil dans une
bibliothèque, une armoire ou tout autre espace confiné.
Assurez-vous que la ventilation de l’appareil est adéquate.
CAN ICES-3(B)/NMB-3(B)
L’élimination des équipements usagés
Applicable uniquement dans les pays membres de l’Union
européenne et les pays disposant de systèmes de recyclage.
Apposé sur le produit lui-même, sur son
emballage, ou figurant dans la documentation qui
l’accompagne, ce pictogramme indique que les
appareils électriques et électroniques usagés,
doivent être séparés des ordures ménagères.
Afin de permettre le traitement, la valorisation
et le recyclage adéquats des appareils usagés, veuillez
les porter à l’un des points de collecte prévus,
conformément à la législation nationale en vigueur.
En les éliminant conformément à la réglementation en vigueur,
vous contribuez à éviter le gaspillage de ressources précieuses
ainsi qu’à protéger la santé humaine et l’environnement.
Pour de plus amples renseignements sur la collecte et le recyclage,
veuillez vous renseigner auprès des collectivités locales.
Le non-respect de la réglementation relative à l’élimination des
déchets est passible d’une peine d’amende.
FRANÇAIS
DMW-XLR1PP&E&GK-DVQX1208ZA.book 15 ページ 2017年2月6日 月曜日 午後5時11分
DVQX1208 (FRE)
16
Précautions
Cet appareil est un adaptateur de microphone XLR pour les
appareils photo numériques de Panasonic.
Installer un microphone XLR disponible dans le commerce
et le combiner avec un appareil photo numérique permet
d'enregistrer un son stéréo de haute qualité.
Cet appareil prend en charge la sortie du son en haute
résolution. L'installer sur un appareil photo numérique
permet d'enregistrer un son en haute résolution.
Dispositifs compatibles (À compter de février 2017)
Dispositifs compatibles : DC-GH5
Pour avoir les toutes dernières informations sur les
dispositifs compatibles, consultez le mode d'emploi, le
catalogue ou le site Web de l'appareil photo numérique.
http://panasonic.jp/support/global/cs/dsc/
Manipulation de l’appareil
Ne soumettez pas l'appareil à de fortes vibrations ou à
des chocs. Cela peut être la cause de
dysfonctionnements et de pannes.
Le sable et la saleté peuvent être la cause d'un
dysfonctionnement de l'appareil. En utilisant l'appareil
dans un endroit comme la plage, prenez des mesures
pour le protéger du sable et de la saleté.
En utilisant cet appareil les jours de pluie ou à la plage,
prenez soin de le garder au sec.
Cet appareil n'est ni à l'épreuve de la poussière ni à
l'épreuve des éclaboussures. Si par inadvertance des
gouttes d'eau etc. éclaboussent l'appareil, essuyez-les à
l'aide d'un chiffon doux et sec. Si l'appareil ne fonctionne
plus correctement, consultez votre revendeur ou
Panasonic.
Veuillez lire également le mode d’emploi de votre appareil
photo numérique.
Accessoires fournis
Les codes du produit sont corrects à compter de février
2017. Ceux-ci sont susceptibles d’être modifiés.
1 Étui souple
2 Support de câble
Celui-ci est fixé à l’appareil au moment de l’achat.
DVPY1001Z DVGE1055Z
12
DMW-XLR1PP&E&GK-DVQX1208ZA.book 16 ページ 2017年2月6日 月曜日 午後5時11分
17
(FRE) DVQX1208
Noms des éléments
1 Commutateur de ligne/micro LINE/MIC/i48V (INPUT1)
2 Commutateur de gain GAIN (INPUT1)
3 Commutateur passe-bas LOW CUT (INPUT1)
4 Commutateur de gain GAIN (INPUT2)
5 Commutateur passe-bas LOW CUT (INPUT2)
6 Commutateur de ligne/micro LINE/MIC/i48V (INPUT2)
7 Molette de niveau audio AUDIO LEVEL (INPUT2)
8 Commutateur de réglage automatique du niveau ALC
9 Commutateur des canaux 1/2 CH1/2
: Molette de niveau audio AUDIO LEVEL (INPUT1)
; Griffe porte-accessoires
< Voyant d’alimentation POWER
= Levier de verrouillage
> Griffe de montage
? Levier de relâche
@ Support de câble
A Prise XLR (INPUT1)
B Prise XLR (INPUT2)
DMW-XLR1PP&E&GK-DVQX1208ZA.book 17 ページ 2017年2月6日 月曜日 午後5時11分
DVQX1208 (FRE)
18
Installation sur l'appareil photo
Vérifiez que l'appareil photo est hors marche. Installer ou
retirer l'adaptateur de microphone XLR tandis que l'appareil
photo est en marche peut causer des dysfonctionnements.
1 Faites glisser le levier de
verrouillage dans le
sens opposé à celui
indiqué par l'icône
[LOCK 1] (1).
2
Faites glisser l'adaptateur
de microphone XLR dans la
griffe porte-accessoires
jusqu'à ce qu'il clique
solidement en place (
2
).
3 Faites glisser le levier de
verrouillage à la position
[LOCK 1] (3).
Pour retirer l'adaptateur de microphone XLR, faites glisser
le levier de verrouillage dans le sens opposé à la flèche
[LOCK
1
] et faites-le glisser de la griffe porte-accessoires.
Raccordement d'un microphone
Branchez la fiche du câble
du microphone dans la
prise XLR de l'appareil.
Pour éviter de forcer
inutilement sur la griffe porte-
accessoires de l'appareil photo
numérique, branchez la fiche en tenant l'appareil avec
votre main.
S'il n'y a qu'un seul câble à brancher, branchez-le à la
prise [INPUT1].
Utilisez un câble de microphone XLR blindé avec une
prise XLR (3 broches).
Le câble du microphone peut être
fixé au support de câble de
l'appareil.
L'orientation du support de câble
peut être changée. Retirez le
support de câble et installez-le
dans un autre sens.
Conservez le support de câble
hors de portée des enfants pour
qu’ils ne puissent pas l’avaler.
DMW-XLR1PP&E&GK-DVQX1208ZA.book 18 ページ 2017年2月6日 月曜日 午後5時11分
19
(FRE) DVQX1208
Un microphone XLR ou un
support de microphone
disponibles dans le commerce
peuvent être installés sur la griffe
porte-accessoires de l'appareil.
Retrait du câble du microphone
Appuyez sur le levier de
relâche (1), et tenez la
fiche pour la retirer (2).
Utilisation de
l'adaptateur de microphone XLR
Cet appareil peut être utilisé en mettant l'appareil photo
numérique sur [ON] tandis qu'il est installé sur ce dernier.
Le voyant POWER de l'appareil s'allumera.
Le son de fonctionnement de la mise en marche peut être
enregistré ou bien le son peut être coupé, comme lorsque
le commutateur est utilisé pendant l’enregistrement d'un
film.
Réglage du niveau d’enregistrement
Réglez le niveau d'enregistrement du son qui entre par les
prises XLR (INPUT1, INPUT2).
Le niveau d'enregistrement du microphone incorporé de
l'appareil photo numérique et de la prise [MIC] ne peut
pas être réglé.
1 Faites glisser le
commutateur ALC sur
[OFF].
2 Tournez la molette
AUDIO LEVEL (INPUT1,
INPUT2) pour régler le
niveau d'enregistrement
(volume).
Le réglage du niveau tout en contrôlant à l'aide d'un
casque branché à l'appareil photo numérique ou à l'aide
de l'affichage du niveau du microphone de l'appareil
photo numérique est recommandé.
Réglage automatique du niveau d'enregistrement
Faites glisser le commutateur ALC sur [ON]. À hauts
volumes, le niveau d'e nregistrement est baissé
automatiquement pour réduire la déformation du son.
Réduction du bruit causé par le vent ou la
manipulation
Le bruit créé par le vent ou la manipulation est réduit en
retirant les composantes basses fréquences qui entrent par
les prises XLR (INPUT1, INPUT2).
Réglez le commutateur
LOW CUT (INPUT1, INPUT2)
sur [16Hz] ou [160Hz].
Choix basé sur le type de bruit.
DMW-XLR1PP&E&GK-DVQX1208ZA.book 19 ページ 2017年2月6日 月曜日 午後5時11分
DVQX1208 (FRE)
20
Utilisation de dispositifs
audio externes
1 Réglez le commutateur
LINE/MIC/i48V (INPUT1,
INPUT2) selon le
dispositif raccordé.
Réglez le commutateur sur le dispositif raccordé
correspondant aux prises XLR (INPUT1, INPUT2).
Lorsqu'il est réglé sur [i48V], brancher un dispositif
qui ne prend pas en charge i48V de tension peut
causer des dommages au dispositif raccordé.rifiez
le dispositif avant de le brancher.
Si un bruit provenant d'une prise non branchée vous ennuie,
réglez le commutateur LINE/MIC/
i
48V sur [LINE].
2
(Lorsque [MIC], [
i
48V] est
sélectionné) Réglez le niveau
d'entrée à l'aide du commutateur
GAIN (INPUT1, INPUT2).
Lorsque le commutateur LINE/MIC/i48V est réglé sur
[MIC] ou sur [i48V], le gain d'entrée peut être chan
avec le commutateur GAIN.
Si le commutateur LINE/MIC/i48V est réglé sur
[LINE], le gain d'entrée ne peut pas être changé.
3 glez le canal
d'enregistrement avec le
commutateur CH1/2.
Si vous utilisez un microphone stéréo avec deux fiches
XLR (3 broches), branchez le canal gauche dans la
prise XLR (INPUT1), et le canal droit dans la prise XLR
(INPUT2), et réglez le commutateur CH1/2 sur
[INPUT 1/2].
[LINE]
Dispositifs audio externes (comme les tables
de mixage).
[MIC]
Microphone dynamique ou microphone avec
batterie incorporée.
[i48V]
Microphone prenant en charge une tension
de i48V (alimentation fantôme)
[i20] i20 dB
[0]
0dB
(Réglage par défaut, niveau standard :
j40 dBu)
[j20] j20 dB
Configuration
Son enregistré avec CH1/CH2
[INPUT 1/1] INPUT1
CH1
CH2
[INPUT 1/2]
INPUT1 CH1
INPUT2 CH2
DMW-XLR1PP&E&GK-DVQX1208ZA.book 20 ページ 2017年2月6日 月曜日 午後5時11分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

Panasonic XLR Microphone Adaptor Manuale utente

Categoria
Microfoni
Tipo
Manuale utente