AEG FFB74707PM Manuale utente

Marca: AEG

Modello: FFB74707PM

Categoria: Lavastoviglie

Tipo: Manuale utente

USER

MANUAL

EN User Manual 2

Dishwasher

ES Manual de instrucciones 28

Lavavajillas

FFB74707PM

FFB74707PW

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per AEG FFB74707PM o

cerca il tuo prodotto tra le migliori offerte di Lavastoviglie

CONTENTS

1. SAFETY INFORMATION......................................................................................2

2. SAFETY INSTRUCTIONS.................................................................................... 4

3. PRODUCT DESCRIPTION...................................................................................6

4. CONTROL PANEL................................................................................................7

5. PROGRAMMES....................................................................................................8

6. OPTIONS............................................................................................................10

7. SETTINGS.......................................................................................................... 11

8. BEFORE FIRST USE..........................................................................................14

9. DAILY USE......................................................................................................... 15

10. HINTS AND TIPS..............................................................................................17

11. CARE AND CLEANING.................................................................................... 19

12. TROUBLESHOOTING......................................................................................22

13. TECHNICAL INFORMATION............................................................................26

14. ENVIRONMENTAL CONCERNS......................................................................27

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

www.aeg.com2

responsible for any injuries or damage that are the result

of incorrect installation or usage. Always keep the

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

•This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

•Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away from the appliance unless continuously

supervised.

•Children of less than 3 years of age should be kept

away from the appliance unless continuously

supervised.

•Children should be supervised to ensure that they do

not play with the appliance.

•Keep detergents away from children.

•Keep children and pets away from the appliance when

the door is open.

•Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

•This appliance is for cleaning household-type dishes

and tableware only.

•This appliance is designed for single household

domestic use in an indoor environment.

•This appliance may be used in, offices, hotel guest

rooms, bed & breakfast guest rooms, farm guest

houses and other similar accommodation where such

use does not exceed (average) domestic usage levels.

•Do not change the specification of this appliance.

ENGLISH 3

•The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 10 (1.0) bar

(MPa)

•Follow the maximum number of 14 place settings.

•If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

•WARNING: Knives and other utensils with sharp

points must be loaded in the basket with their points

down or placed in a horizontal position.

•Do not leave the appliance with the open door

unattended to avoid stepping accidentally onto it.

•Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

•Do not use high pressure water sprays and/or steam

to clean the appliance.

•If the appliance has ventilation openings in the base,

they must not be covered e.g. by a carpet.

•The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not install or use the appliance

where the temperature is less than

0 °C.

• Install the appliance in a safe and

suitable place that meets installation

requirements.

2.2 Electrical connection

WARNING!

Risk of fire and electric

shock.

• Warning: this appliance is designed to

be installed / connected to a

grounding connection in the building.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need to

www.aeg.com4

be replaced, this must be carried out

by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance is fitted with a 13 A

mains plug. If it is necessary to

change the mains plug fuse, use only

a 13 A ASTA (BS 1362) fuse (UK and

Ireland only).

2.3 Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes, pipes

not used for a long time, where repair

work has been carried out or new

devices fitted (water meters, etc.), let

the water flow until it is clean and

clear.

• Ensure that there are no visible water

leaks during and after the first use of

the appliance.

• The water inlet hose has a safety

valve and a sheath with an inner

mains cable.

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately close the water tap and

disconnect the mains plug from the

mains socket. Contact the Authorised

Service Centre to replace the water

inlet hose.

2.4 Use

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Dishwasher detergents are

dangerous. Follow the safety

instructions on the detergent

packaging.

• Do not drink and play with the water in

the appliance.

• Do not remove the dishes from the

appliance until the programme is

complete. Some detergent may

remain on the dishes.

• Do not store items or apply pressure

on the open door of the appliance.

• The appliance can release hot steam

if you open the door while a

programme operates.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Please note that self-repair or non-

professional repair can have safety

consequences and might void the

guarantee.

• The following spare parts will be

available for 7 years after the model

has been discontinued: motor,

circulation and drain pump, heaters

and heating elements, including heat

pumps, piping and related equipment

including hoses, valves, filters and

aquastops, structural and interior

parts related to door assemblies,

printed circuit boards, electronic

displays, pressure switches,

thermostats and sensors, software

and firmware including reset software.

Please note that some of these spare

parts are only available to

professional repairers, and that not all

spare parts are relevant for all

models.

• The following spare parts will be

available for 10 years after the model

has been discontinued: door hinge

and seals, other seals, spray arms,

drain filters, interior racks and plastic

peripherals such as baskets and lids.

• Concerning the lamp(s) inside this

product and spare part lamps sold

ENGLISH 5

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational

status of the appliance. They are not

intended to be used in other

applications and are not suitable for

household room illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

3. PRODUCT DESCRIPTION

67 5

11 10 8

1Worktop

2Ceiling spray arm

3Upper spray arm

4Lower spray arm

5Filters

6Rating plate

7Salt container

8Air vent

9Rinse aid dispenser

10 Detergent dispenser

11 Lower basket

12 Upper basket

13 Cutlery drawer

www.aeg.com6

4. CONTROL PANEL

2 4 53

68 7

1On/off button

2Program touch button

3Programme indicators

4Display

5Delay touch button

6Option touch button

7Indicators

8Start touch button

4.1 Indicators

Indicator Description

Salt indicator. It is on when the salt container needs refilling. It is always

off while the programme operates.

Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It

is always off while the programme operates.

Washing phase indicator. It is on when the washing phase operates.

Rinsing phase indicator. It is on when the rinsing phase operates.

Drying phase indicator. It is on when you select a programme with the dry‐

ing phase. It flashes when the drying phase operates.

Delay indicator. It is on when you set the delay start.

GlassCare indicator.

ExtraPower indicator.

ExtraHygiene indicator.

ENGLISH 7

5. PROGRAMMES

The order of the programmes in the table may not reflect their sequence on the control

panel.

Programme Dishwasher

load

Degree of

soil

Programme phases Options

1) Crockery,

cutlery, pots,

pans

Normal,

lightly dried-

• Prewash

• Dishwashing 50 °C

• Intermediate rinse

• Final rinse 55 °C

• Drying

• AirDry 2)

• ExtraPower

• GlassCare

• ExtraHygiene

Crockery,

cutlery, pots,

pans

Normal to

heavy,

dried-on

• Prewash

• Dishwashing 60 °C

• Intermediate rinse

• Final rinse 60 °C

• Drying

• AirDry 2)

• ExtraPower

• GlassCare

• ExtraHygiene

Crockery,

cutlery, pots,

pans

Normal,

lightly dried-

• Dishwashing 60 °C

• Intermediate rinse

• Final rinse 55 °C

• Drying

• AirDry 2)

• ExtraPower

• GlassCare

• ExtraHygiene

Crockery,

cutlery

Fresh, light‐

ly dried-on

• Dishwashing 60 °C

• Intermediate rinse

• Final rinse 50 °C

• AirDry 2)

• ExtraPower

• GlassCare

• ExtraHygiene

Crockery,

cutlery

Fresh • Dishwashing 50 °C

• Intermediate rinse

• Final rinse 45 °C

• AirDry 2)

• ExtraPower

• GlassCare

• ExtraHygiene

3) Crockery,

cutlery, pots,

pans

All • Prewash

• Dishwashing 50 -

60 °C

• Intermediate rinse

• Final rinse 60 °C

• Drying

• AirDry 2)

4) None Cleaning

the appli‐

ance interi‐

• Cleaning 70 °C

• Intermediate rinse

• Final rinse

• AirDry 2)

5) All All • Prewash

www.aeg.com8

Programme Dishwasher

load

Degree of

soil

Programme phases Options

6) Crockery,

cutlery

Normal soil • Prewash

• Dishwashing 60 °C

• Intermediate rinse

• Final rinse 50 °C

• Drying

• AirDry 2)

1) This programme offers the most efficient use of water and energy consumption for crockery and cut‐

lery with normal soil. This is the standard programme for test institutes. This programme is used to as‐

sess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.

2) Automatic door opening during the drying phase. Refer to "Settings".

3) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically ad‐

justs the temperature and the quantity of water, the energy consumption and the programme duration.

4) This programme is designed to clean the inside of the appliance effectively and efficiently. It removes

limescale and grease buildup. The programme should be run at least once every 2 months with a desca‐

ler or a cleaning product designed for dishwashers and without any load.

5) With this programme, you can quickly rinse off food remains from dishes and prevent odours forming

in the appliance. Do not use detergent with this programme.

6) This is the most silent programme. The wash pump works at a very low speed to reduce the noise

generated by the appliance. Due to the low speed, the programme duration is long.

5.1 Consumption values

Programme 1)2) Water (l) Energy (kWh) Duration (min)

11.0 0.746 240

11.9 1.210 160

11.9 1.110 90

11.8 0.970 60

11.0 0.620 30

12.1 1.220 170

10.6 0.710 60

5.0 0.010 15

11.9 0.980 256

1) The pressure and the temperature of the water, the variations of the mains supply, the options, the

quantity of dishes and the degree of soil can change the values.

2) The values for programmes other than ECO are indicative only.

ENGLISH 9

5.2 Information for test institutes

To receive the necessary information for conducting performance tests (e.g. according

to: EN60436 ), send an email to:

[email protected]

In your request, include the product number code (PNC) from the rating plate.

For any other questions regarding your dishwasher, refer to the service book provided

with your appliance.

6. OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

The option button toggles

between the available

options and their possible

combinations.

Not all options are

compatible with each other.

If you select non compatible

options, the appliance

automatically deactivates

one or more of them. Only

the indicators of the still

active options are on.

If an option is not applicable

to a programme, the related

indicator is off or it flashes

quickly for a few seconds

and then goes out.

Activating options can affect

the water and energy

consumption as well as the

programme duration.

6.1 GlassCare

This option protects a delicate load,

glassware in particular, from damaging. It

prevents rapid changes in the

dishwashing temperature of the selected

programme and reduces it to 45 °C.

How to activate GlassCare

Press Option until the indicator is on.

The display shows the updated

programme duration.

6.2 ExtraPower

This option improves the dishwashing

results of the selected programme. It

increases the wash temperature and

duration.

How to activate ExtraPower

Press Option until the indicator is

on.

The display shows the updated

programme duration.

6.3 ExtraHygiene

This option provides better cleaning

results by keeping the temperature

between 65 and 70 °C for at least 10

minutes during the last rinsing phase.

How to activate ExtraHygiene

Press Option until the indicator is on.

The display shows the updated

programme duration.

www.aeg.com10

7. SETTINGS

7.1 Programme selection

mode and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter user mode.

Settings available in the user mode:

• The level of water softener according

to the water hardness.

• The level of rinse aid according to the

required dosage.

• Activation or deactivation of the

AirDry.

As the appliance stores the saved

settings, there is no need to configure

it before every cycle.

How to set the programme

selection mode

The appliance is in programme selection

mode when the programme indicator

is on and the display shows the

programme duration.

After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode

the following way:

Press and hold simultaneously Delay

and Option until the appliance is in

programme selection mode.

How to enter user mode

Make sure the appliance is in

programme selection mode.

To enter user mode, press and hold

simultaneously Delay and Option until

the indicators , and

flash and the display is blank.

7.2 The water softener

The water softener removes minerals

from the water supply, which would have

a negative effect on the washing results

and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. Set the right level of the

water softener to assure good washing

results.

Water hardness

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l Clarke de‐

grees

Water softener lev‐

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

ENGLISH 11

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l Clarke de‐

grees

Water softener lev‐

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5 1 2)

1) Factory setting.

2) Do not use salt at this level.

Regardless of the type of detergent

used, set the proper water hardness

level to keep the salt refill indicator

active.

Multi-tabs containing salt are

not effective enough to

soften hard water.

Regeneration process

For the correct water softener operation,

the resin of the softener device needs to

be regenerated regularly. This process is

automatic and is the part of the normal

dishwasher operation.

When the prescribed quantity of water

(see values in the table) has been used

since the previous regeneration process,

a new regeneration process will be

initiated between the final rinse and the

programme end.

Water softener lev‐

Amount of water

(l)

1 250

2 100

3 62

4 47

5 25

6 17

7 10

8 5

9 3

10 3

In case of the high water softener setting,

it may occur also in the middle of the

programme, before the rinse (twice

during a programme). Regeneration

initiation has no impact on the cycle

duration, unless it occurs in the middle of

a programme or at the end of a

programme with a short drying phase. In

such cases, the regeneration prolongs

the total duration of a programme by

additional 5 minutes.

Subsequently, the rinsing of the water

softener that lasts 5 minutes may begin

in the same cycle or at the beginning of

the next programme. This activity

increases the total water consumption of

a programme by additional 4 litres and

the total energy consumption of a

programme by additional 2 Wh. The

rinsing of the softener ends with a

complete drain.

Each performed softener rinse (possible

more than one in the same cycle) may

prolong the programme duration by

another 5 minutes when it occurs at any

point at the beginning or in the middle of

a programme.

All the consumption values

mentioned in this section are

determined in line with the

currently applicable standard

in laboratory conditions with

water hardness 2.5mmol/L

(water softener: level 3)

according to the regulation:

2019/2022 .

The pressure and the

temperature of water as well

as the variations of the

mains supply can change

the values.

www.aeg.com12

How to set the water softener

level

Make sure the appliance is in user mode.

1. Press Program.

• The indicator still flashes.

• The remaining indicators are off.

• The display shows the current

setting: e.g. = level 5.

2. Press Program repeatedly to change

the setting.

3. Press the on/off button to confirm the

setting.

7.3 The rinse aid level

The rinse aid helps to dry the dishes

without streaks and stains. It is

automatically released during the hot

rinse phase.

You can set the released quantity of

rinse aid between level 1 (minimum

quantity) and level 6 (maximum quantity).

Factory setting: level 4.

When the rinse aid chamber is empty,

the rinse aid indicator is on, notifying to

refill rinse aid. If the drying results are

satisfactory while using multi-tablets only,

you can deactivate the dispenser and the

indicator. However, for the best drying

performance, always use rinse aid and

keep the rinse aid indicator active.

To deactivate the rinse aid dispenser and

indicator, set the level of rinse aid to 0.

How to set the rinse aid level

Make sure the appliance is in user mode.

1. Press Start.

• The indicator still

flashes.

• The remaining indicators are off.

• The display shows the current

setting: e.g. = level 4.

2. Press Start repeatedly to change the

setting.

3. Press the on/off button to confirm the

setting.

7.4 AirDry

AirDry improves the drying results with

less energy consumption. The appliance

door opens automatically during the

drying phase and remains ajar.

AirDry is automatically activated with all

programmes other than (if

applicable).

The duration of the drying phase and the

door opening time vary depending on the

selected programme and options.

When AirDry opens the door, the display

shows the remaining time of the running

programme.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

If, afterwards, the door is

closed for at least 3 minutes,

the running programme

ends.

CAUTION!

If children have access to

the appliance, we advise to

deactivate AirDry. The

automatic opening of the

door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press Delay.

• The indicator still flashes.

• The remaining indicators are off.

• The display shows the current

setting:

– = AirDry is deactivated.

ENGLISH 13

– = AirDry is activated.

2. Press Delay to change the setting.

3. Press the on/off button to confirm the

setting.

8. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not put dishes in

the baskets.

After starting the programme, the

appliance recharges the resin in the

water softener for up to 5 minutes. The

washing phase starts only after this

procedure is complete. The procedure is

repeated periodically.

8.1 The salt container

CAUTION!

Use rough salt designed for

dishwashers only. Fine salt

increases the risk of

corrosion.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (only for the first time).

3. Fill the salt container with dishwasher

salt (until it is full).

4. Carefully shake the funnel by its

handle to get the last granules inside.

5. Remove the salt around the opening

of the salt container.

6. Turn the cap of the salt container

clockwise to close the salt container.

CAUTION!

Water and salt can come out

of the salt container when

you fill it. After you fill the

salt container, immediately

start the shortest programme

to prevent corrosion. Do not

put dishes in the baskets.

www.aeg.com14

8.2 How to fill the rinse aid

dispenser

CAUTION!

The compartment (B) is for

rinse aid only. Do not fill it

with detergent.

CAUTION!

Only use rinse aid designed

specifically for dishwashers.

1. Open the lid (C).

2. Fill the dispenser (B) until the rinse

aid reaches the marking ''MAX''.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent excessive

foam formation.

4. Close the lid. Make sure that the lid

locks into position.

Fill the rinse aid dispenser

when the indicator (A) is

clear.

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start a programme suitable

for the type of load and the degree of

soil.

9.1 Using the detergent

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent (gel, powder or

tablets) in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

ENGLISH 15

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

For information about the

detergent dosage, refer to

the manufacturer's

instructions on the

packaging of the product.

Usually, 20 - 25 ml of gel

detergent is adequate for

washing a load with normal

soil.

The upper ends of the two

vertical ribs inside the

compartment (B) indicate

the maximum level for filling

the dispenser with gel (max.

30ml).

9.2 Setting and starting a

programme

Starting a programme

1. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode and the door is closed.

2. Press Program again and again until

the indicator of the desired

programme is on.

The display shows the programme

duration.

3. Set the applicable options.

4. Press Start to start the programme.

• The indicator of the running phase

is on.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with

delay start

1. Set a programme.

2. Press Delay repeatedly until the

display shows the desired delay time

(from 1 to 24 hours).

3. Press Start to begin the countdown.

• The indicator is on.

• The remaining time counts down

in hours. The final hour is

displayed in minutes.

When the countdown is completed, the

programme starts and the indicator of the

running phase is on. The indicator is

off.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry function.

Do not try to close the

appliance door within 2

minutes after AirDry

automatically opens it as this

may cause damage to the

appliance.

If, afterwards, the door is

closed for at least 3 minutes,

the running programme

ends.

Cancelling the delay start

while the countdown

operates

When you cancel the delay start you

have to set the programme and options

again.

Press simultaneously Delay and Option

until the appliance is in programme

selection mode.

Cancelling the programme

Press and hold simultaneously Delay

and Option until the appliance is in

programme selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

www.aeg.com16

End of the programme

When the programme is complete, the

Auto Off function switches the appliance

off automatically.

All buttons are inactive except for the

on/off button.

Close the water tap.

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.

The function comes into operation:

• When the programme is complete.

• After 5 minutes if a programme was

not started.

10. HINTS AND TIPS

10.1 General

Follow the hints below to ensure optimal

cleaning and drying results in daily use

and to protect the environment.

• Washing dishes in the dishwasher as

instructed in the user manual usually

consumes less water and energy than

washing dishes by hand.

• Load the dishwasher to its full

capacity to save water and energy.

For best cleaning results, arrange

items in the baskets as instructed in

the user manual and do not overload

the baskets.

• Do not pre-rinse dishes by hand. It

increases the water and energy

consumption. When needed, select a

programme with a prewash phase.

• Remove larger residues of food from

the dishes and empty cups and

glasses before putting them inside the

appliance.

• Soak or slightly scour cookware with

firmly cooked-on or baked-on food

before washing it in the appliance.

• Make sure that items in the baskets

do not touch or cover each other.

Only then can the water completely

reach and wash the dishes.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''All in

1''). Follow the instructions on the

packaging.

• Select a programme according to the

type of load and the degree of soil.

offers the most efficient use of

water and energy consumption.

• To prevent limescale buildup inside

the appliance:

– Refill the salt container whenever

necessary.

– Use the recommended dosage of

the detergent and rinse aid.

– Make sure that the current level of

the water softener agrees with the

hardness of the water supply.

– Follow the instructions in the

chapter "Care and cleaning".

10.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

designed for dishwasher. Other

products can cause damage to the

appliance.

• In areas with hard and very hard

water, we recommend to use basic

dishwasher detergent (powder, gel,

tablets containing no additional

agents), rinse aid and salt separately

for optimal cleaning and drying

results.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use tablets

with long programmes.

• Always use the correct quantity of

detergent. Insufficient dosage of

detergent can result in poor cleaning

results and hard-water filming or

spotting on the items. Using too much

detergent with soft or softened water

results in detergent residues on the

dishes. Adjust the amount of

ENGLISH 17

detergent based on the water

hardness. Refer to the instructions on

the detergent packaging.

• Always use the correct quantity of

rinse aid. Insufficient dosage of rinse

aid decreases the drying results.

Using too much rinse aid results in

bluish layers on the items.

• Make sure that the water softener

level is correct. If the level is too high,

the increased quantity of salt in the

water might result in rust on cutlery.

10.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid, complete

the following steps:

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do put dishes in the baskets.

4. When the programme is complete,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

10.4 Loading the baskets

• Always use the whole space of the

baskets.

• Use the appliance to wash

dishwasher-safe items only.

• Do not wash in the appliance items

made of wood, horn, aluminium,

pewter and copper as they could

crack, warp, get discoloured or pitted.

• Do not wash in the appliance items

that can absorb water (sponges,

household cloths).

• Put hollow items (cups, glasses and

pans) with the opening facing

downwards.

• Make sure that glass items do not

touch each other.

• Put light items in the upper basket.

Make sure that the items do not move

freely.

• Put cutlery and small items in the

cutlery drawer.

• Move the upper basket upwards to

accommodate large items in the lower

basket.

• Make sure that the spray arms can

move freely before you start a

programme.

10.5 Before starting a

programme

Before you start the selected

programme, make sure that:

• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is enough salt and rinse aid

(unless you use multi-tablets).

• The arrangement of the items in the

baskets is correct.

• The programme is suitable to the type

of load and the degree of soil.

• The correct quantity of detergent is

used.

10.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance. Hot

items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

After the programme is

completed, water can still

remain on the inside

surfaces of the appliance.

www.aeg.com18

11. CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spray arms negatively affect

the washing results. Check

these elements regularly

and, if necessary, clean

them.

11.1 Internal cleaning

• Clean the appliance interior with a soft

damp cloth.

• Do not use abrasive products,

abrasive cleaning pads, sharp tools,

strong chemicals, scourer or solvents.

• Wipe clean the door, including the

rubber gasket, once a week.

• To maintain the performance of your

appliance, use a cleaning product

designed for dishwashers at least

once every two months. Carefully

follow the instructions on the

packaging of the product.

• Use the automatic cleaning

programme for optimal cleaning

results.

• Using short-duration programmes

regularly can cause grease and

limescale buildup inside the

appliance. Run long-duration

programmes at least twice a month to

prevent the buildup.

11.2 Removal of foreign

objects

Check the filters and the sump after each

use of the dishwasher. Foreign objects

(e.g. pieces of glass, plastic, bones or

toothpicks, etc) decrease the cleaning

performance and can cause damage to

the drain pump.

CAUTION!

If unable to remove the

foreign objects, contact an

Authorised Service Centre.

1. Disassemble the filters system as

instructed in this chapter.

2. Remove any foreign objects

manually.

3. Reassemble the filters as instructed

in this chapter.

11.3 External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

11.4 Cleaning the filters

The filter system is made of 3 parts.

1. Turn the filter (B) counterclockwise

and remove it.

ENGLISH 19

2. Remove the filter (C) out of filter (B).

3. Remove the flat filter (A).

4. Wash the filters.

5. Make sure that there are no residues

of food or soil in or around the edge

of the sump.

6. Put back in place the flat filter (A).

Make sure that it is correctly

positioned under the 2 guides.

7. Reassemble the filters (B) and (C).

8. Put back the filter (B) in the flat filter

(A). Turn it clockwise until it locks.

CAUTION!

An incorrect position of the

filters can cause bad

washing results and damage

to the appliance.

11.5 Cleaning the lower spray

arm

We recommend to clean the lower spray

arm regularly to prevent soil from

clogging the holes.

Clogged holes can cause unsatisfactory

washing results.

1. To remove the lower spray arm, pull

it upwards.

2. Wash the spray arm under running

water. Use a thin pointed tool, e.g. a

toothpick, to remove particles of soil

from the holes.

www.aeg.com20

La pagina sta caricando ...

AEG FFB74707PM Manuale utente

Marca: AEG

Modello: FFB74707PM

Categoria: Lavastoviglie

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: AEG FFB74707PM User manual
español: AEG FFB74707PM Manual de usuario

AEG FFB74707PM Manuale utente

AEG FFB74707PM Manuale utente

in altre lingue

Documenti correlati

Altri documenti