Pottinger NOVACAT 8600 T CRW Istruzioni per l'uso
- Categoria
- Tosa erba
- Tipo
- Istruzioni per l'uso
Questo manuale è adatto anche per
/PERATOR@S MANUAL
GB
).3425#4)/.3 &/2 02/$5#4 $%,)6%29 0AGE
4RANSLATION OF THE ORIGINAL /PERATING -ANUAL
Ihre / Your / Votre • Masch.Nr. • Fgst.Ident.Nr.
.R 99 3842.GB.80I.0
• Disc mower
NOVACAT T 8
(Type PSM 3842 : + . . 01000)
NOVACAT T 8 ED
(Type PSM 3842 : + . . 01000)
NOVACAT T 8 CRW
(Type PSM 3842 : + . . 01000)
ALLG./BA SEITE 2 / 0000-GB
Important information concerning Product
Liability.
According to the laws governing product liability, the manufacturer and dealer are obliged to hand the
operating manual to the customer at the time of sale, and to instruct them in the recommended operating,
safety, and maintenance regulations. Confirmation is necessary to prove that the machine and operating
manual have been handed over accordingly.
For this purpose,
- document A is to be signed and sent to Pöttinger,
- document B remains with the dealer supplying the machine,
- and the customer receives document C.
In accordance with the laws of product liability, every farmer is an entrepreneur.
According to the laws of product liability, property damage is damage caused by a machine and not to
it. An excess of Euro 500 is provided for such a liabilioty.
In accordance with the laws of product liability, entrepreneurial property damages are excluded from
the liability.
Attention! Should the customer resell the machine at a later date, the operating manual must be given
to the new owner who must then be instructed in the recommended regulations referred to herein.
GB Dear Farmer
You have just made an excellent choice. Naturally we are very happy
and wish to congratulate you for having chosen Pöttinger. As your
agricultural partner, we offer you quality and efficiency combined with
reliable servicing.
In order to assess the spare-parts demand for our agricultural machines
and to take these demands into consideration when developing new
machines, we would ask you to provide us with some details.
Furthermore, we will also be able to inform you of new developments.
Dokument D
GB-0600 Dokum D Anbaugeräte
PÖTTINGER Landtechnik GmbH
Industriegelände 1
A-4710 Grieskirchen
Tel. 07248 / 600 -0
Telefax 07248 / 600-2511
T Machine checked according to delivery note. All attached parts removed. All safety equipment, drive shaft and operating
devices at hand.
T Operation and maintenance of machine and/or implement according to operating instructions explained to the customer.
T Tyres checked re. correct pressure.
T Wheel nuts checked re. tightness.
T Drive shaft cut to correct lenght.
T *VYYLJ[WV^LY[HRLVɈZWLLKPUKPJH[LK
T Fitting to tractor carried out: to three-point linkage
T Trial run carried out and no defects found.
T Functions explained during trial run.
T Pivoting in transporting and operating position explained.
T Information given re. optional extras.
T Absolute need to read the operating manual indicated.
Please check. X
According to the product liability please check the above mentioned items.
INSTRUCTIONS FOR
PRODUCT DELIVERY
GB
In order to prove that the machine and the operating manual have been properly delivered, a confirmation is necessary.
For this purpose please do the following:
- sign the document A and send it to the company Pöttinger or via the internet to www.poettinger.at
- document B stays with the specialist factory delivering the machine.
- document C stays with the customer.
- 4 -
TABLE OF CONTENTS
0800_GB-Inhalt_3842
GB
Attention!
Safety hints to
observe in
supplement!
Table of contents
WARNING SIGNS
CE sign ...........................................................................5
Meaning of warning signs ..............................................5
GENERAL SAFETY TIPS
Travelling with implement in tow ....................................6
Coupling and uncoupling the implement ......................6
Regulations for Use ........................................................6
Travelling on roads .........................................................6
Before starting work .......................................................6
Checking before operation .............................................6
ATTACHING TO TRACTOR
Hydraulic connection......................................................7
Air brake unit ..................................................................7
Hydraulic brake unit .......................................................7
Attaching the machine ...................................................8
Connecting the electrics.................................................8
Cardan shaft length ........................................................8
Adjusting the attaching height ........................................9
Garaging the machine ....................................................9
TRANSPORT
Conversion from working to transport position ............10
Driving on public roads ................................................11
Transport position .........................................................11
OPERATION
Conversion from transport to working position ............12
Working width ...............................................................13
Drawbar swivelling range .............................................13
Cutting height adjustment ............................................13
MAINTENANCE
Safety point ..................................................................14
General maintenance hints ...........................................14
Cleaning of machine parts ...........................................14
Parking in the ope ........................................................14
Winter storage ..............................................................14
Drive shafts ...................................................................14
Hydraulic unit ...............................................................14
Gear ..............................................................................15
After the first hours of operation ..................................16
Garaging .......................................................................16
Connecting the brake hoses .......................................17
Brake adjustment .........................................................17
Cleaning the line filters ................................................17
HYDRAULIC BRAKE UNIT
Connecting the break line ............................................18
Brake adjustment .........................................................18
TECHNICAL DATA
Technical data ..............................................................19
Necessary connections ................................................19
The defined use of the mower unit ...............................20
Position of Vehicle Identification Plate .........................20
Starting torque ..............................................................21
Air pressure ..................................................................21
SUPPLEMENT
Recommendations for work safety .............................24
Driveshaft .....................................................................25
Lubrication chart ..........................................................27
Lubricants .....................................................................28
- 5 -
0800_GB-Warnbilder_3842
GB
WARNING SIGNS
Stay clear of swinging area of implements
Close both side protective coverings before engaging
p.t.o..
Never reach into the crushing danger area as long as
parts may move.
Pay attention to swivel area
CE sign
The CE sign, which is affixed by the manufacturer, indicates outwardly that this machine
conforms to the engineering guideline regulations and the other relevant EU guidelines.
EU Declaration of Conformity (see supplement)
By signing the EU Declaration of Conformity, the manufacturer declares that the machine being
brought into service complies with all relevant safety and health requirements.
Meaning of warning signs
Danger - flying objects; keep safe distance from the
machine as long as the engine is running.
Wait until all machine components have stopped
completely before touching them.
Stay clear of mower knife area as long as tractor engine
is running with PTO connected.
Shut off engine and remove key before performing
maintenance or repair work.
Recommendations
for work safety
All points referring
to satety in this
manual are
indicated by this
sign.
bsb 447 410
495.167
- 6 -
0800_GB-AllgSicherheit_3842
GB
Travelling with implement in tow
The attached implement influences the travelling
characteristics of the towing vehicle.
• Danger of tipping exists when working on slopes.
• The driving must be adapted to the corresponding
terrain and ground conditions.
• The towing vehicle is to
be sufficiently equiped
with weights at the front
or at the rear in order to
guarantee the steering
and braking capacity (a
minimum of 20% of the
vehicle's tare weight on
the front axle).
• Transporting people on the implement is not
permitted.
Coupling and uncoupling the implement
• Danger of injury exists when coupling the implement
to the tractor!
• When coupling, do not stand between tractor and
implement while tractor is reversing !
• No-one must enter the area between tractor and
implement unless both vehicles have been secured
against rolling with wheel chocks !
• Drive shaft connection or disconnection is only to
be undertaken when the motor has stopped.
Regulations for Use
Regulations for Use: See chapter „Technical Data“.
• The trailer‘s load limits (permitted axle load, support
load, total weight) may not be exceeded.The relevant
details are located on the right side of the trailer.
• In addition, observe the power limits of the tractor
being used.
Travelling on roads
• Observe the road rules
GENERAL SAFETY TIPS
20%
Kg
Important!
General safety
hints for the use
of this implement!
Before starting work
a. Before commencing work, the operator must be aware
of all operating devices and functions.The learning
of these is too late after having already commenced
operation!
b. Before commencing any work check that implement
is safe for road travel and operation.
c. The danger of being crushed or cut exists in the Pick-
up, cutting unit, tailgate and upper extension areas.
d. Before driving the vehicle, the driver must ensure that
nobody will be endangered and that no obstructions
are present. If the tractor driver does not have a clear
view of the roadway immediately behind the implement,
he must be guided when reversing.
e. Observe the safety information fixed to implement.
An explanation of what the individual graphic warning
symbols mean can be found on page 5.
f. Observe also the tips in the respective chapters and
in the supplement to this operating manual.
Checking before operation
The following tips should make preparing the implement
for operation easier. Detailled information for individual
points can be found in the respective chapters in this
operating manual.
1. Check that all safety equipment (covers, casings, etc.)
is in good condition and fixed in the proper positions
of protection on the implement
2. Grease and oil the implement according to the
lubrication chart. Check the gearing for tightness and
the oil level.
3. Check that tyres have the correct air pressure.
4. Check that wheel nuts are sitting firmly.
5. Ensure the correct p.t.o.-r.p.m.
6. Make the electrical connections to the tractor and
check that they are correct. Take note of the tips in
the operating manual!
7. Carry out the following adaptions:
• Drawbar height
• Cardan shaft length
8. Secure the implement only with the equipment
provided.
9. Cut drive shaft to correct length and check that overload
safeguard is functioning (see Supplement)
10.
Check the electronic unit function.
11.
Connect hydraulic lines to tractor.
• Check hydraulic hoses for damage and wear.
• Ensure the correct connection.
12.
All swivelling parts must be secured against dangerous
position changes.
13.
Check parking brake and service brake functions.
- 7 -
0800_GB-ANBAU_3842
GB
Safety hints:
see supplement-
A1 points 7.), 8a.
- 8h.)
ATTACHING TO TRACTOR
Connect hydraulic lines to tractor
- Turn p.t.o. off before connecting
- Put lever (ST) on the control unit into the floating position
(0).
- Take care that snap-lock couplers are clean.
The following hydraulic connections must be available on
the tractor at least:
- 1 double-action hydraulic connection (DW)
- 1 single-action hydraulic connection (EW)
DW
Plug connectors marked “1” and “2” into the
double-action servo-valve
EW
Plug the connector marked with "3" into the single
action servo-valve.
DW = Double-action connection
EW = Single-action connection
TD 26/92/48
s
h
0
ST
Air brake unit
- connect yellow brake lines
- connect red brake lines
- recharge pressure tank
- Brakes are now released.
See also chapter “Air brake unit”
Hydraulic connection
Hydraulic brake unit
- Connect brake line
- 8 -
0800_GB-ANBAU_3842
GB
ATTACHING TO TRACTOR
Cardan shaft length
- Before operation, check lengths of drive shafts and
adapt if necessary (see chapter "Adaption of Drive
Shaft" in supplement B also).
Procedure for cutting to length
- To determine length required, set implement in closest
working position (L2) to tractor, hold driveshaft halves
side by side and mark off.
025-05-04
L2
Attaching the machine
- Set tractor lower link in centre
- Fix the hydraulic lower link (U) in such a way that the
machine cannot swing out sideways.
- against erratic, unstable machine trailing
- Link full floating axle to lower link
- Properly secure the coupling bolts (1)
- Raise both parking supports (2) into the transport
position
- Secure with linch pin (3)
Connecting the electrics
• connect 7 pole electrical cable (E3)
• Check that lights are functioning.
3
2
1
- 9 -
0800_GB-ANBAU_3842
GB
ATTACHING TO TRACTOR
Use hose holder
- Place the electro-cable and hydraulic lines in hose
holder receptacle
Garaging the machine
- Park machine only on firm level ground.
- Swing both parking supports (2) down and secure with
linch pin
- Secure machine against rolling using wheel chocks
(4)
Adjusting the attaching height
• Raise lower link (U) until frame (F) is in a horizontal
position
• Fix lower link height
- 10 -
0800_GB-TRANSPORT_3842
GB
TRANSPORT
Conversion from working to transport position
Safety
hints:
see supplement-A1
Pkt. 8a. - h.)
• Changing from
working position
to transport
position is only to
be carried out on
even, firm ground.
• Never let
the mowing
mechanism run
with the mower
raised.
• Before you leave
the tractor, lower
the machine on to
ground!
Transporting on
public roads
• Observe the
official regulations
of your country.
• Travelling on
open roads may
only be carried
out as described
in chapter
"Transport
position".
• Fasten lower
hydraulic link so
that implement
cannot swing
out sideways.
Pos. 1 Pos. 2
Starting position
• Implement is attached to tractor
- see chapter "Ataching implement to tractor"
Swivelling procedure:
- Move hydraulic crossover valve (1) to “Pos. 1”
- Raise flaps using Bowden wire
- Actuate servo-valve (ST)
- Swivel mower units up hydraulically
- Let flaps lock into place
- Lower rear mounted lifting gear on running frame for
transportation
- Lock rear mounted lifting gear front and back using
hydraulic stop valve (2)
Hydraulic crossover valve function (1)
Pos. 1 Raise / lower lifting gear
Pos. 2 Raise / lower mower units
- 11 -
0800_GB-TRANSPORT_3842
GB
TRANSPORT
Transport position
Driving on public roads
• Observe the regulations issued by your country's
legislative body.
• Driving on public roads must be carried out in the
transport position only
• Protection devices must be in proper condition.
• Before travelling bring all swivelling parts into their
correct positions and secure against dangerous
changes to position.
• Check that lighting functions before travelling.
• Important information can also be found in the
supplement ofthis operating manual.
• Pay attention to transporting height!
Position external safeguard
• Close all stop valves
Hydraulic lower link
- Fix the hydraulic lower link (U) in such a way that the
machine cannot swing out sideways.
285-08-68
285-08-69
0800-GB EINSATZ_3842 - 12 -
GB
OPERATION
Conversion from transport to working position
Safety
hints:
see supplement-A1
Pkt. 8a. - h.)
• Changing from
working position
to transport
position is only to
be carried out on
even, firm ground.
Starting position
• Implement is in transport position
- see chapter "TRANSPORT"
Swivelling procedure:
- Open hydraulic stop valves (2) for rear mounted lifting
gear
- Open hydraulic stop valve (3) to swing drawbar
- Move hydraulic crossover valve (1) to “Pos. 2”
- Raise flaps using Bowden wire
- Actuate servo-valve (ST)
- Swivel mower units up
hydraulically
- Move hydraulic crossover valve (1) to “Pos. 1”
- Swivel drawbar left or right using servo-valve
Hydraulic stop valve “3”
Pos. 1 Pos. 2
Hydraulic crossover valve “1”
0800-GB EINSATZ_3842 - 13 -
GB
OPERATION
Drawbar swivelling range
Working width
Cutting height adjustment
Adjust cutting height via upper link
- See operator’s manual for individual mowers
- 14 -
GB
0400_GB-BA-Allg. Wartung
Parking in the ope
When parking in the open for
long periods of time, clean
piston rods and then coat
with grease.
FETT
TD 49/93/2
Safety
points!
• Turn engine off
when adjustment,
service and repair
work is to be
done.
• Do not work un-
der the machine
without safe
support.
• Retighten all
screws after the
first hours of
operation..
General maintenance hints
In order to keep the implement in
good condition after long periods
of operation, please observe the
following points:
- Tighten all screws after the first
hours of operation.
In particular check:
- blade screws on the mowers
- tine screws on the swather and tedder.
Spare part
a. The original components and accessories have
been designed especially for these machines and
appliances.
b. We want to make it quite clear that components and
accesories that have not been supplied by us have
not been tested by us.
c. The installation and/or use of such products can,
therefore, negatively change or influence the
construction characteristics of the appliance. We are
not liable for damages caused by the use of components
and accessories that have not been supplied by us.
d. Alterations and the use of auxiliary parts that are
not permitted by the manufacturer render all liability
invalid.
Cleaning of machine parts
Attention! Do not use high-pressure washers for the
cleaning of bearing- and hydraulic parts.
- Danger of rust!
- After cleaning, grease the machine according to the
lubrication chart and carry out a short test run.
- Cleaning with too high pressure may do damage to
varnish.
Safety point
• Turn engine off when adjustment, service and repair
work is to be done.
Hydraulic unit
Caution! Danger of injury or infection!
Under high pressure, escaping fluids can penetrate
the skin. Therefore seek immediate medical help!
After the first 10 operating hours and then every
consecutive 50 operating hours
- Check the hydraulic unit and lines for tightness and
retighten screw connections if necessary.
Before operation
- Check hydraulic hoses for wear.
Replace worn or damaged hydraulic hoses immediately.
The replacement hoses must meet the manufacturer’s
technical requirements.
Hose lines are subject to natural ageing. The period of
use should not exceed 5 – 6 years.
Winter storage
- Thoroughly clean machine before storage.
- Put up protection against weather.
- Change or replenish gear oil.
- Protect exposed parts from rust.
- Lubricate all greasing points according to lubrication
chart.
Drive shafts
- see notes in the supplement
For maintenance please note!
The instructions in this operating manual are always
valid.
In case there are no special instructions available, then
the notes in the accompanying drive shaft manufacturer´
instructions are valid.
Repair In-
structions
Please refer to
repair instructions
in supplement (if
available)
MAINTENANCE
- 15 -
GB
MAINTENANCE
0800-GB WARTUNG_3842
Changing oil:
- Change oil after the first 50 operating hours.
- Under normal operating conditions, oil is to be
replenished annually.
- Change oil after 100h at the latest.
Fill with oil:
- Take out oil drain plug (62), let run out and duly dispose
waste oil.
- Put oil drain plug back in again.
- Take out oil filler plug (5) and top up oil "SAE 90" up
to the level screw (OIL LEVEL).
Starting transmission
Full amount: 2,2 litres SAE 90 EP Full amount: 2,7 litres SAE 90 EP
Gear
1 = Oil level screw
5 = Filler opening
62 = Oil outlet
- 16 -
GB
MAINTENANCE
0800-GB WARTUNG_3842
Power take-off gear
Full amount: 4,4 litres SAE 90 EP Full amount: 4,4 litres SAE 90 EP
After the first hours of operation
- Retighten all screws.
- Above all, check wheel nuts and cutter
screws.
• Always maintain the specified tyre pressure (3,2 bar).
Garaging
- Thoroughly clean machine.
- Grease all greasing points according to lubrication
chart.
- Put up weather protection.
- Protect exposed parts from rust.
1 = Oil level screw
5 = Filler opening
62 = Oil outlet
- 17 -
0800-GB-DRUCKLUFTBREMSE_3842
GB
AIR BRAKE UNIT
Brake adjustment
The piston stroke in the brake cylinder may not be greater
than 65 mm
• Theref ore check piston stroke occasionally and reset
if necessary.
• Adjustment is carried out using adjusting screw (7).
• Piston stroke should be 12 - 15 mm when reset.
Lever length 120 mm
Attention!
For the brake unit to function properly:
- observe maintenance intervals
- observe brake setting (stroke max. 65 mm)
- keep the brake unit clean
Connecting the brake hoses
When connecting the brake hoses ensure:
- that the hose-coupling sealing ring is clean
- proper sealing
- connection is according to markings
"Compressed air storage" (coloured red) to "Compressed
air storage"
“Brakes" (coloured yellow) to "Brakes"
• Replace damaged sealing rings.
• Drain water from air reservoir before first run of the
day.
• Only travel when air pressure in the brake-system is
5.0 bar.
The air reservoir is to be drained of water daily.
Using a piece of wire turn bolt on drain valve in a
sideways direction.
When dirty
- Screw out drain valve and clean.
max. 65 mm
069-04-08
Cleaning the line filters
Both line filters are to be cleaned depending on operating
conditions, normally about every 3 - 4 months. The sinter
filter cartridges are to be removed to be cleaned.
Procedure:
a) Depress locking tappet (21) on both brackets and
remove slider (22).
b) Remove locking tappet with O-ring (23), compression
spring and sinter filter cartridge.
c) Wash sinter filter cartridge with nitro cleaning agent
and blast clean with compressed air. Damaged filter
cartridges are to be replaced.
d) Reassembly is in reverse order, but ensure that O-ring
does not jam guiding slots of slider!
Attention!
The brake unit is
a safety device.
Therefore any
work carried
out on it must
only be done by
specialists.
- 18 -
0800-GB-HYDRAULIKBREMSE_3842
GB
HYDRAULIC BRAKE UNIT
Brake adjustment
Connecting the break line
When connecting the brake line take care that:
- the connection is clean
- the line is properly connected
- the connection is properly sealed
Attention!
The brake unit is
a safety device.
Therefore any
work carried out
on it must only be
done by specia-
lists.
Brake lining check
- every 200 operating hours
• Open viewing hole by pulling out the rubber stopper
(if available).
• The brake lining must be replaced when the residual
lining thickness is
a) 5 mm with riveted linings
b) 2 mm with glued linings
• Insert rubber stopper again.
Note!
Conditional to
the function is
to continually
check brake wear
and function
and make
adjustments if
necessary.
An adjustment is
necessary when
approx. 2/3 of the
maximum cylinder
travel is utilized
with full braking.
To do this jack
up the axle and
secure against
any unintentional
movement.
Setting the rod adjuster
- every 200 operating hours
• Move rod by hand in direction of push.
The wheel brake must be reset with a cylinder rod
empty run of 35 mm.
• Adjust reset screw.
Set empty run “a” to 10 – 12% of the connected brake
lever length “B”.
e.g. Lever length 165 mm
Empty run 15 – 18 mm
- 19 -
0800-GB Techn-Daten_3842
GB
TECHNICAL DATA
Description NOVACAT T 8
(Type 3842)
NOVACAT T 8 ED
(Type 3842)
NOVACAT T 8 CRW
(Type 3842)
Attachment Lower link Kat.III Lower link Kat.III Lower link Kat.III
No. of mowing discs 3 x 7 3 x 7 3 x 7
No. of knives per disc 2 2 2
Working width [m] 8,3 8,3 8,3
Working width incl. front mower [m] 11,0 11,0 11,0
Length when working [m] 10,3 10,5 10,3
Transport width [m] 3,0 3,0 3,0
Transport length [m]
Take note! Be aware of total length with mounted
front mower!
12,5 12,7 12,5
Transport height (rear lowered) [m] 4,0 4,0 4,0
Required power [kW/PS] 192 / 260 192 / 260 192 / 260
Coverage up to [ha/h] 10,0 10,0 10,0
Max. p.t.o. speed [U/min-1] 1000 1000 1000
Tyres 650/50-R22,5 650/50-R22,5 650/50-R22,5
Swath width [m] 3 x 1,4 3 x 1,4 3 x 1,4
Weight [kg] 6610 6810 7050
Permanent sound emmission level [dB(A)] 93,6 93,6 93,6
Technical data
All data subject to revision.
Necessary connections
• 1 double-action hydraulic connection
pressure min.: 140 bar
pressure max.: 200 bar
• 1 single-action hyfraulic connection
pressure min.: 140 bar
pressure max.: 200 bar
• 7-pole electric connection for lighting (12 Volt)
- 20 -
0800-GB Techn-Daten_3842
GB
TECHNICAL DATA
Position of Vehicle Identification Plate
The factory number (Masch. Nr. / Fgst.Ident.Nr.) is
imprinted on the accompanying Vehicle Identification
Plate (as shown) and on the frame. Guarantee issues
and further inquiries cannot be processed without the
factory number being stated.
Please enter the number onto the front page of the
operating manual immediately after taking delivery
of the vehicle/implement.
The defined use of the mower unit
The „NOVACAT T 8 (Type 3842)“ mower is intended solely for normal use in agricultural work.
• The mowing of grassland and short stemmed fodder.
Any other uses outside of these are regarded as undefined.
The manufacturer takes no responsibility for any resulting damage which occurs henceforth. The risk is carried by
the user alone.
• The keeping of operating, service and maintenance requirements layed down by the manufacturer also come under
the heading of „defined use“.
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Pottinger NOVACAT 8600 T CRW Istruzioni per l'uso
- Categoria
- Tosa erba
- Tipo
- Istruzioni per l'uso
- Questo manuale è adatto anche per
in altre lingue
Documenti correlati
-
Pottinger NOVACAT 307 T RCB COLLECTOR Istruzioni per l'uso
-
-
-
-
-
-
-
-
-