AEG SKE818E9ZC Manuale utente

Tipo
Manuale utente
USER
MANUAL
EN User Manual 2
Refrigerator
IT Istruzioni per l’uso 21
Frigorifero
SKE818E9ZC
CONTENTS
1. SAFETY INFORMATION.............................................................................................2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. INSTALLATION............................................................................................................6
4. CONTROL PANEL....................................................................................................... 9
5. DAILY USE..................................................................................................................11
6. HINTS AND TIPS........................................................................................................12
7. CARE AND CLEANING.............................................................................................15
8. TROUBLESHOOTING............................................................................................... 15
9. NOISES.......................................................................................................................19
10. TECHNICAL DATA..................................................................................................19
11. INFORMATION FOR TEST INSTITUTES...............................................................19
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damage that are the result of incorrect installation or
www.aeg.com
2
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children aged from 3 to 8 years are allowed to load
and unload the appliance provided that they have
been properly instructed.
This appliance may be used by persons with very
extensive and complex disabilities provided that they
have been properly instructed.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Do not let children play with the appliance.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
Keep all packaging away from children and dispose of
it appropriately.
1.2
General Safety
This appliance is intended to be used in household
and similar applications such as:
Farm houses; staff kitchen areas in shops, offices
and other working environments;
By clients in hotels, motels, bed and breakfast and
other residential type environments.
To avoid contamination of food respect the following
instructions:
do not open the door for long periods;
clean regularly surfaces that can come in contact
with food and accessible drainage systems;
ENGLISH
3
store raw meat and fish in suitable containers in the
refrigerator, so that it is not in contact with or drip
onto other food.
WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure, clear of
obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other
than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the
food storage compartments of the appliance, unless
they are of the type recommended by the
manufacturer.
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
When the appliance is empty for long period, switch it
off, defrost, clean, dry and leave the door open to
prevent mould from developing within the appliance.
Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
2.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Do not use the appliance before
installing it in the built-in structure
due to safety manner.
Follow the installation instructions
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Make sure the air can circulate around
the appliance.
At first installation or after reversing
the door wait at least 4 hours before
connecting the appliance to the
power supply. This is to allow the oil
to flow back in the compressor.
www.aeg.com4
Before carrying out any operations on
the appliance (e.g. reversing the
door), remove the plug from the
power socket.
Do not install the appliance close to
radiators or cookers, ovens or hobs.
Do not expose the appliance to the
rain.
Do not install the appliance where
there is direct sunlight.
Do not install this appliance in areas
that are too humid or too cold.
When you move the appliance, lift it
by the front edge to avoid scratching
the floor.
The appliance contains a bag of
desiccant. This is not a toy. This is not
food. Please dispose of it
immediately.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
WARNING!
When positioning the
appliance, ensure the supply
cord is not trapped or
damaged.
WARNING!
Do not use multi-plug
adapters and extension
cables.
The appliance must be earthed.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Always use a correctly installed
shockproof socket.
Make sure not to cause damage to
the electrical components (e.g. mains
plug, mains cable, compressor).
Contact the Authorised Service
Centre or an electrician to change the
electrical components.
The mains cable must stay below the
level of the mains plug.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
2.3 Use
WARNING!
Risk of injury, burns, electric
shock or fire.
The appliance contains flammable
gas, isobutane (R600a), a natural gas with
a high level of environmental
compatibility. Be careful not to cause
damage to the refrigerant circuit
containing isobutane.
Do not change the specification of
this appliance.
Do not put electrical appliances (e.g.
ice cream makers) in the appliance
unless they are stated applicable by
the manufacturer.
If damage occurs to the refrigerant
circuit, make sure that there are no
flames and sources of ignition in the
room. Ventilate the room.
Do not let hot items to touch the
plastic parts of the appliance.
Do not store flammable gas and
liquid in the appliance.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not touch the compressor or the
condenser. They are hot.
2.4 Internal lighting
WARNING!
Risk of electric shock.
The type of lamp used for this
appliance is for household appliances
only. Do not use it for house lighting.
2.5 Care and cleaning
WARNING!
Risk of injury or damage to
the appliance.
ENGLISH 5
Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
This appliance contains hydrocarbons
in the cooling unit. Only a qualified
person must do the maintenance and
the recharging of the unit.
Regularly examine the drain of the
appliance and if necessary, clean it. If
the drain is blocked, defrosted water
collects in the bottom of the
appliance.
2.6 Service
To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.
Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
The following spare parts will be
available for 7 years after the model
has been discontinued: thermostats,
temperature sensors, printed circuit
boards, light sources, door handles,
door hinges, trays and baskets. Please
note that some of these spare parts
are only available to professional
repairers, and that not all spare parts
are relevant for all models.
Door gaskets will be available for 10
years after the model has been
discontinued.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Remove the door to prevent children
and pets to be closed inside of the
appliance.
The refrigerant circuit and the
insulation materials of this appliance
are ozone-friendly.
The insulation foam contains
flammable gas. Contact your
municipal authority for information on
how to discard the appliance
correctly.
Do not cause damage to the part of
the cooling unit that is near the heat
exchanger.
3.
INSTALLATION
WARNING!
Refer to Safety chapters.
WARNING!
Refer to installation
instruction document to
install your appliance.
WARNING!
Fix the appliance in
accordance with installation
instruction document to
avoid a risk of instability of
the appliance.
www.aeg.com6
3.1 Dimensions
B
A
H1
W1
D1
W2
D2
W3
D3
Overall dimensions
1)
H 1 mm 1769
W 1 mm 556
D 1 mm 549
1)
the height, width and depth of the appliance
without the handle and feet
Space required in use
1)
H 2 (A+B) mm 1816
W 2 mm 560
D 2 mm 552
Space required in use
1)
A mm 1780
B mm 36
1)
the height, width and depth of the appliance
including the handle, plus the space necessary for
free circulation of the cooling air
Overall space required in use
1)
H 3 (A+B) mm 1816
W 3 mm 780
ENGLISH 7
Overall space required in use
1)
D 3 mm 1085
1)
the height, width and depth of the appliance
including the handle, plus the space necessary for
free circulation of the cooling air, plus the space
necessary to allow door opening to the minimum
angle permitting removal of all internal equip-
ment
3.2 Location
To ensure appliance's best functionality,
you should not install the appliance in
the nearby of the heat source (oven,
stoves, radiators, cookers or hobs) or in a
place with direct sunlight. Make sure that
air can circulate freely around the back of
the cabinet.
3.3 Positioning
This appliance should be installed in a
dry, well ventilated indoor position.
This appliance is intended to be used at
ambient temperature ranging from 10°C
to 38°C.
If you have any doubts
regarding where to install
the appliance, please turn to
the vendor, to our customer
service or to the nearest
Authorised Service Centre.
It must be possible to
disconnect the appliance
from the mains power
supply. The plug must
therefore be easily
accessible after installation.
3.4 Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
The manufacturer declines all
responsibility if the above safety
precautions are not observed.
This appliance complies with the
E.E.C. Directives.
3.5 Ventilation requirements
The airflow behind the appliance must
be sufficient.
5 cm
min.
200 cm
2
min.
200 cm
2
CAUTION!
Refer to the installation
instructions for the
installation.
3.6 Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.
CAUTION!
At every stage of reversing
the door protect the floor
from scratching with a
durable material.
www.aeg.com8
4. CONTROL PANEL
56 4 3 2
1
1
Display
2
Temperature warmer button
3
Temperature colder button
4
OK
5
Mode
6
ON/OFF
It is possible to change predefined
sound of buttons by pressing together
Mode and temperature colder button for
a few seconds. Change is reversible.
4.1 Display
Off
min
A B C D
EFG
A. Timer indicator
B. Coolmatic function
C. LongFresh function
D. Temperature indicator
E. Alarm indicator
F. ChildLock function
G. DrinksChill function
4.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "Troubleshooting" .
4.3 Switching off
1. Press the appliance ON/OFF for 3
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
4.4 Temperature regulation
Set the temperature of the appliance by
pressing the temperature regulators.
Default recommended set temperature
is:
+4°C for the fridge
The temperature range may vary
between 2°C and 8°C for fridge.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
4.5 Coolmatic function
If you need to insert in the fridge
compartment a large amount of warm
food, for example after doing the
ENGLISH
9
grocery shopping, we suggest activating
the Coolmatic function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
1. Press the Mode until the
corresponding icon appears.
The Coolmatic indicator flashes.
2. Press the OK to confirm.
The Coolmatic indicator is shown.
This function stops automatically after
approximately 6 hours.
You can deactivate the Coolmatic
function before its automatic end by
repeating the procedure or by selecting
a different fridge set temperature.
4.6 LongFresh compartment
setting
The storage temperature and the relative
humidity in LongFresh compartment
provide optimal conditions for the
storage of various kinds of fresh food
(like fish, meat, seafood, etc.) as it
preserves its high nutritional values, as
well as high humidity level much longer
than regular refrigerator.
1. Press Mode until the corresponding
icon appears.
The display shows 3. This is the default
setting that ensures the most effective
performance.
The possible settings can vary from 1
(the coldest) to 5 (the warmest).
Settings from 1 to 3 are suitable for fish
and meat.
Settings 4 and 5 are suitable for
vegetables and fruits. In these settings
the compartment works similarly to the
fridge compartment.
2. Press the temperature buttons on the
control panel to select the required
setting.
3. Press OK to confirm the setting.
The indicator returns to the fridge
temperature setting in a few seconds.
4.7 ChildLock function
Activate the ChildLock function to lock
the buttons from unintentional
operation.
1. Press Mode until the corresponding
icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.
4.8 DrinksChill function
The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down food products for
a certain period of time.
1. Press Mode until the corresponding
icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press OK to confirm.
The DrinksChill indicator is shown.
The Timer starts to flash (min).
At the end of the countdown the "0 min"
indicator flashes and an audible alarm
sounds. Press OK to switch off the sound
and terminate the function.
To switch off the function repeat the
procedure until the DrinksChill goes off.
It is possible to change the
time at any time during the
countdown and at the end
by pressing the Temperature
colder button and the
Temperature warmer button.
4.9 Door open alarm
If the door is left open for approximately
5 minutes, the sound is on and alarm
indicator flashes.
The alarm stops after closing the door.
During the alarm, the sound can be
muted by pressing any button.
If you do not press any
button, the sound switches
off automatically after
around one hour to avoid
disturbing.
www.aeg.com10
5. DAILY USE
5.1 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1. Gradually pull the shelf up until it
comes free.
2. Reposition as required.
This model is equipped with a
variable storage box which can be
moved sideways.
5.2 Movable shelves
The walls of the refrigerator are
equipped with a series of runners so that
the shelves can be positioned as desired.
This appliance is also equipped with a
shelf consisting of two parts. The front
half of the shelf can be placed under the
second half to make better use of space.
To fold the shelf:
1. Take out the front half gently.
2. Slide it into the lower rail and under
the second half.
1
2
Do not move the glass shelf
above the vegetable drawer
to ensure correct air
circulation.
5.3 LongFresh compartment
The storage temperature and the relative
humidity in this compartment provide
optimal conditions for the storage of
various kinds of food.
To learn about the temperature settings
in the LongFresh compartment please
refer to the “LongFresh compartment
setting” section.
LongFresh compartment is suitable for
the storage of a variety of fresh food (like
fish, meat, seafood, etc.) as it preserves
its high nutritional values as well as high
humidity level much longer in
comparison to the regular refrigerator.
5.4 Humidity control
The LongFresh compartment has stops
that prevent the drawers from falling out
when fully extended. To remove the
drawer:
1. Pull the drawer to the maximum.
2. Lift and pull out the drawer.
ENGLISH
11
The drawers marked with water drop
symbols: and can be used
according to the desired storage
conditions independently of each other
with lower or higher humidity.
Regulation for each drawer is separate
and is controlled using the slide valve at
the front of the drawer.
“Dry”: low relative humidity.
This humidity level is reached when
both sliders are set into this position
and the ventilation openings are
wide open.
“Humid”: high relative humidity.
This humidity level is reached when
both sliders are set in this position
and the ventilation openings
are closed. Humidity is kept and can
not escape.
5.5 Temperature indicator
For proper storage of food the
refrigerator is equipped with the
temperature indicator. The symbol on
the side wall of the appliance indicates
the coldest area in the refrigerator.
If OK is displayed (A), put fresh food into
area indicated by symbol, if not (B), wait
at least 12 hours and check if it is OK (A).
If it is still not OK (B), adjust the setting
control to a colder setting.
OK
OK
A
B
5.6 DYNAMICAIR
The refrigerator compartment is
equipped with a device that allows rapid
cooling of foods and keeps more
uniform temperature in the
compartment.
This device activates automatically when
needed.
The fan operates only when
the door is closed.
6. HINTS AND TIPS
6.1 Hints for energy saving
Most efficient use of energy is
ensured in the configuration with the
drawers in the bottom part of the
appliance and shelves evenly
distributed. Position of the door bins
does not affect energy consumption.
Do not open the door frequently or
leave it open longer than necessary.
Do not set too high temperature to
save energy unless it is required by
the characteristics of the food.
Ensure a good ventilation. Do not
cover the ventilation grilles or holes.
Make sure that food products inside
the appliance allow air circulation
through dedicated holes in the rear
interior of the appliance.
6.2 Hints for fresh food
refrigeration
Good temperature setting that
ensures preservation of fresh food is a
temperature less than or equal to
+4°C.
Higher temperature setting inside the
appliance may lead to shorter shelf
life of food.
Cover the food with packaging to
preserve its freshness and aroma.
Always use closed containers for
liquids and for food, to avoid flavours
or odours in the compartment.
www.aeg.com
12
To avoid the cross-contamination
between cooked and raw food, cover
the cooked food and separate it from
the raw one.
It is recommended to defrost the
food inside the fridge.
Do not insert hot food inside the
appliance. Make sure it has cooled
down at room temperature before
inserting it.
To prevent food waste the new stock
of food should always be placed
behind the old one.
6.3 Hints for food refrigeration
Meat (all types): wrap in a suitable
packaging and place it on the glass
shelf above the vegetable drawer.
Store meat for at most 1-2 days.
Fruit and vegetables: clean
thoroughly (eliminate the soil) and
place in a special drawer (vegetable
drawer).
It is advisable not to keep the exotic
fruits like bananas, mangos, papayas
etc. in the refrigerator.
Vegetables like tomatoes, potatoes,
onions, and garlic should not be kept
in the refrigerator.
Butter and cheese: place in an airtight
container or wrap in an aluminium foil
or a polythene bag to exclude as
much air as possible.
Bottles: close them with a cap and
place them on the door bottle shelf,
or (if available) on the bottle rack.
Always refer to the expiry date of the
products to know how long to keep
them.
6.4 Hints for fresh food storage in LongFresh compartment
Type of food Air humidity adjustment Storage time
Butter
“dry”
up to 1 month
Beef, venison, small meat
cuts, poultry
“dry”
up to 7 days
Tomato sauce
“dry”
up to 4 days
Fish, shellfish, cooked meat
products
“dry”
up to 3 days
Cooked seafood
“dry”
up to 2 days
Salad, vegetables
Carrots, herbs, brussels
sprouts, celery
“humid”
up to 1 month
Artichokes, cauliflower,
chicory, iceberg lettuce, en-
dive, lamb’s lettuce, lettuce,
leeks, radicchio
“humid”
up to 21 days
Broccoli, Chinese leaves,
kale, cabbage, radishes, Sa-
voy cabbage
“humid”
up to 14 days
Peas, kohlrabi
“humid”
up to 10 days
ENGLISH 13
Type of food Air humidity adjustment Storage time
Spring onions, radishes, as-
paragus, spinach
“humid”
up to 7 days
Fruit
Pears, dates (fresh), straw-
berries, peaches
“humid”
up to 1 month
Plums
rhubarb, gooseberries
“humid”
up to 21 days
Apples (not sensitive to
cold), quinces
“humid”
up to 20 days
Apricots, cherries
“humid”
up to 14 days
Damsons, grapes
“humid”
up to 10 days
Blackberries, currants
“humid”
up to 8 days
Figs (fresh)
“humid”
up to 7 days
Blueberries, raspberries
“humid”
up to 5 days
Cakes containing cream and other kinds
of pastry products can be stored in the
LongFresh compartment for 2 or 3 days.
Not to be placed in the LongFresh
compartment:
Cold sensitive fruit which have to be
stored at cellar or room temperature
like pineapple, bananas, grapefruit,
melons, mango, papaya, oranges,
lemons, kiwi fruit.
Vegetables which have to be stored
at room temperature like tomatoes,
potatoes, onions, and garlic.
The types of food not mentioned
above should be stored in the
refrigerator compartment (e.g. all
sorts of cheese, cold cuts, etc.).
The level of air humidity in
the drawers depends on the
content of humidity in the
stored food, vegetable and
fruit and on the frequency of
door opening.
The LongFresh compartment is also
suitable for slow thawing of food. In this
case the thawed food can be stored in
the LongFresh compartment for up to
two days.
Pay attention to the freshness of the
food, especially on the expiry date.
Quality and freshness influence the
storage time.
The whole storage cycle time will
depend on the preservation
conditions made prior to the final
storage in the fridge.
Any type of food, fruit, vegetable or
animal food shall always be packed or
wrapped up before storage.
Food rich in proteins will go bad
quicker. This means seafood will spoil
before fish which in turn will spoil
before meat. While storing food in a
LongFresh compartment storage time
for that kind of food can be increased
by up to three times as well without
loss on quality.
All food stored in a LongFresh
compartment should be taken out of
the drawers roughly 15 - 30 min
before consumption, particularly fruit
and vegetables to be consumed
without any additional cooking
process. Allowing fruit and vegetables
www.aeg.com
14
to return to room temperature will
improve the texture and flavour.
7. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
7.1 Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand-
new product, then dried thoroughly.
CAUTION!
Do not use detergents,
abrasive powders, chlorine
or oil-based cleaners as they
will damage the finish.
CAUTION!
The accessories and parts of
the appliance are not
suitable for washing in a
dishwasher.
7.2 Periodic cleaning
The equipment has to be cleaned
regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral
soap.
2. Regularly check the door seals and
wipe them clean to ensure they are
clean and free from debris.
3. Rinse and dry thoroughly.
7.3 Defrosting of the
refrigerator
Defrosting of the fridge compartment is
automatic. The water that condenses
flows into a recipient on the compressor
and evaporates. The recipient cannot be
removed.
7.4 Period of non-operation
When the appliance is not in use for long
period, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Clean the appliance and all
accessories.
4. Leave the door open to prevent
unpleasant smells.
8.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem Possible cause Solution
The appliance does not op-
erate.
The appliance is switched
off.
Switch on the appliance.
The mains plug is not con-
nected to the mains socket
correctly.
Connect the mains plug to
the mains socket correctly.
ENGLISH 15
Problem Possible cause Solution
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains sock-
et. Contact a qualified elec-
trician.
The appliance is noisy. The appliance is not suppor-
ted properly.
Check if the appliance
stands stable.
Acoustic or visual alarm is
on.
The cabinet has been re-
cently switched on.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
The temperature in the ap-
pliance is too high.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
The door is left open. Close the door.
The compressor operates
continually.
Temperature is set incorrect-
ly.
Refer to "Control Panel"
chapter.
Many food products were
put in at the same time.
Wait a few hours and then
check the temperature
again.
The room temperature is too
high.
Refer to "Installation" chap-
ter.
Food products placed in the
appliance were too warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed cor-
rectly.
Refer to "Closing the door"
section.
The Coolmatic function is
switched on.
Refer to "Coolmatic func-
tion" section.
The compressor does not
start immediately after
pressing the "Coolmatic", or
after changing the tempera-
ture.
The compressor starts after a
period of time.
This is normal, no error has
occurred.
Door is misaligned or inter-
feres with ventilation grill.
The appliance is not level-
led.
Refer to installation instruc-
tions.
Door does not open easily. You attempted to re-open
the door immediately after
closing.
Wait a few seconds between
closing and re-opening of
the door.
The lamp does not work. The lamp is in stand-by
mode.
Close and open the door.
www.aeg.com16
Problem Possible cause Solution
The lamp is defective. Contact the nearest Author-
ized Service Centre.
There is too much frost and
ice.
The door is not closed cor-
rectly.
Refer to "Closing the door"
section.
The gasket is deformed or
dirty.
Refer to "Closing the door"
section.
Food products are not wrap-
ped properly.
Wrap the food products bet-
ter.
Temperature is set incorrect-
ly.
Refer to "Control Panel"
chapter.
Appliance is fully loaded and
is set to the lowest tempera-
ture.
Set a higher temperature.
Refer to "Control Panel"
chapter.
Temperature set in the ap-
pliance is too low and the
ambient temperature is too
high.
Set a higher temperature.
Refer to "Operation/Control
Panel" chapter.
Water flows on the rear plate
of the refrigerator.
During the automatic de-
frosting process, frost melts
on the rear plate.
This is correct.
There is too much con-
densed water on the rear
wall of the refrigerator.
Door was opened too fre-
quently.
Open the door only when
necessary.
Door was not closed com-
pletely.
Make sure the door is closed
completely.
Stored food was not wrap-
ped.
Wrap food in suitable pack-
aging before storing it in the
appliance.
Water flows on the floor. The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
Attach the melting water
outlet to the evaporative
tray.
Temperature cannot be set. The "Coolmatic function" is
switched on.
Switch off "Coolmatic func-
tion" manually, or wait until
the function deactivates au-
tomatically to set the tem-
perature. Refer to "Coolmat-
ic function" section.
The temperature in the ap-
pliance is too low/too high.
The temperature is not set
correctly.
Set a higher/lower tempera-
ture.
ENGLISH 17
Problem Possible cause Solution
The door is not closed cor-
rectly.
Refer to "Closing the door"
section.
The food products' tempera-
ture is too high.
Let the food products tem-
perature decrease to room
temperature before storage.
Many food products are
stored at the same time.
Store less food products at
the same time.
The door has been opened
often.
Open the door only if neces-
sary.
The Coolmatic function is
switched on.
Refer to "Coolmatic func-
tion" section.
There is no cold air circula-
tion in the appliance.
Make sure that there is cold
air circulation in the appli-
ance. Refer to "Hints and
Tips" chapter.
Some specific surfaces in-
side the fridge compartment
are warmer at some times.
This is a normal state.
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the OK key pressed for
approximately 10 seconds
until a long sound is heard
and the display turns off for
a short time.
A or or symbol is
shown instead of numbers
on the temperature display.
Temperature sensor prob-
lem.
Contact the nearest Author-
ized Service Centre (the
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible).
If the advice does not lead
to the desired result, call the
nearest Authorized Service
Centre.
8.2 Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
8.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
installation instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
www.aeg.com18
9. NOISES
SSSRRR!
CLICK!
HISSS!
BRRR!
BLUBB!
10. TECHNICAL DATA
The technical information is situated in
the rating plate on the internal side of
the appliance and on the energy label.
The QR code on the energy label
supplied with the appliance
provides a web link to the information
related to the performance of the
appliance in the EU EPREL database.
Keep the energy label for reference
together with the user manual and all
other documents provided with this
appliance.
It is also possible to find the same
information in EPREL using the link
https://eprel.ec.europa.eu
and the
model name and product number that
you find on the rating plate of the
appliance.
11. INFORMATION FOR TEST INSTITUTES
Installation and preparation of the
appliance for any EcoDesign verification
shall be compliant with EN 62552.
Ventilation requirements, recess
dimensions and minimum rear clearances
shall be as stated in this User Manual at
Chapter 3. Please contact the
manufacturer for any other further
information, including loading plans.
ENGLISH 19
12. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
www.aeg.com20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

AEG SKE818E9ZC Manuale utente

Tipo
Manuale utente

in altre lingue