Cartoni Focus 10 Fluid Video Head Manuale utente
- Categoria
- Treppiedi
- Tipo
- Manuale utente
Questo manuale è adatto anche per
PROFESSIONAL CAMERA SUPPORT
USER’S MANUAL & Maintenance
2 3
Index
1.
Safety & Set-Up IntrodUctIon 5
2.
operatIng elementS 6
3.
procedUreS 8
4.
SpecIfIcatIonS 9
5.
maIntenance 10
6.
Warranty 10
7.
acceSSorIeS & prodUct lIne 11
IT IS HEREBY CERTIFIED THAT THE QUALITY MANAGEMENT SYSTEM OF
IAF:17
IAF:29
19714/09/S
CARTONI S.P.A.
VIA DI PORTONACCIO, 33/B 00159 ROMA (RM) ITALIA
VIA DI PORTONACCIO, 33/B 00159 ROMA (RM) ITALIA
DESIGN, MANUFACTURE AND POST-SALE ASSISTANCE OF PROFESSIONAL BROADCAST AND FILM EQUIPMENT.
MARKETING OF PROFESSIONAL BROADCAST AND FILM ACCESSORIES AND PRODUCTS AS LOCAL
AGENCY/REPRESENTATIVE
PROGETTAZIONE, FABBRICAZIONE ED ASSISTENZA POST-VENDITA DI PRODOTTI PER LA CINEMATOGRAFIA E LA
TELEVISIONE PROFESSIONALE. COMMERCIALIZZAZIONE DI PRODOTTI ED ACCESSORI IN CONCESSIONE PER LA
CINEMATOGRAFIA E LA TELEVISIONE PROFESSIONALE
Per informazioni sulla validità
del certificato, visitare il sito
www.rina.org
For information concerning
validity of the certificate, you
can visit the site
www.rina.org
CCEERRTTIIFFIICCAATTEE NNoo..
CERTIFICATO N.
SI CERTIFICA CHE IL SISTEMA DI GESTIONE PER LA QUALITÀ DI
PER I SEGUENTI CAMPI DI ATTIVITÀ / FOR THE FOLLOWING FIELD(S) OF ACTIVITIES
NELLE SEGUENTI UNITÀ OPERATIVE / IN THE FOLLOWING OPERATIONAL UNITS
L'uso e la validità del presente certificato sono soggetti al rispetto del documento RINA: Regolamento per la Certificazione di Sistemi di Gestione per la Qualità
La validità del presente certificato è subordinata a sorveglianza periodica annuale / semestrale ed al riesame completo del sistema di gestione con periodicità triennale
The validity of this certificate is dependent on an annual / six monthly audit and on a complete review, every three years, of the management system
È CONFORME ALLA NORMA / IS IN COMPLIANCE WITH THE STANDARD
Per i requisiti della norma non
applicabili al campo di applicazione
del sistema di gestione
dell'organizzazione, riferirsi alle
informazioni documentate relative.
Reference is to be made to the
relevant documented information
for the requirements of the
standard that cannot be applied to
the Organization's management
system scope
ISO 9001:2015
The use and validity of this certificate are subject to compliance with the RINA document : Rules for the certification of Quality Management Systems
12.06.2009
24.05.2021
CISQ è la Federazione Italiana di Organismi di
Certificazione dei sistemi di gestione aziendale
CISQ is the Italian Federation of
management system Certification Bodies
Prima emissione
First Issue
Data revisione
Revision date
RINA Services S.p.A.
Data scadenza
Expiry Date 02.06.2024
Via Corsica 12 - 16128 Genova Italy
Data decisione di rinnovo
Renewal decision date 24.05.2021
Amilcare Rini
Rome Management System
Certification, Head
Membro degli Accordi di Mutuo
Riconoscimento EA, IAF e ILAC
Signatory of EA, IAF and ILAC
Mutual Recognition Agreements
SGQ N° 002 A
CARTONI ®
All rights reserved ©
4 5
1. Safety & Set-Up IntrodUctIon
The FOCUS 10 Fluid Head is the ideal support for the latest smaller,
lighter high-performance Cameras weighing from 0 to 11 kg (0 to 24.3 lbs).
Extremely compact and lightweight, the innovave FOCUS 10 features
a connuously variable uid damping system on both Pan and Tilt move-
ments and an unrivaled patented variable counterbalance which brings its
range of use to cover all exisng ENG and lighter high-performance cam-
eras.
The FOCUS 10 head comes equipped with a quick release sliding Cam-
era plate, illuminated spirit level and telescopic Pan bar. Its lng range is
+/- 90° has a perfect response throughout the enre Tilt range. This Head
interfaces with all 100 mm bowl base tripods and supports.
The extreme ruggedness and versality together with a superior quality/
price rao makes the FOCUS 10 the best possible support for news Oper-
ators and Videographers.
Before using your new FOCUS 10, please read this user manual.
Before installing the Fluid Head on the Tripod check the Tripod sta-
bility.
Verify that the Camera payload (including lens and all accessories) is
below the maximum capacity of the Fluid Head.
Before seng up the Camera, make sure that the Fluid Head is in
perfect operave condions with no damages.
6 7
1
Camera plate
2
Pan bar aachment
3
Pan bar extension
4
Pan drag selector
5
Pan brake lever
6
Tilt brake lever
7
Camera plate release lever
8
Tilt drag selector
9
Spirit level & Baery
10
Counterbalance selector
11
Tie down knob
12
Pan bar
❼
❾
❶
2. operatIng elementS
❸ ❷
❹
❻
❺⓫
❽
⓬
❿
8 9
Place the FOCUS 10 on your Tripod by loosening the e-down knob
(11) under the Fluid Head and level using the spirit bubble (9). In low
light condions, press buon (9) for light.
Connect the Pan bar (12) to the Fluid Head ghtening the lever (2) on
the Pan bar aachment and select the desired operang angle. The
telescopic Pan bar lenght can be adjusted via lever (3).
Lock both Pan and Tilt brakes (5 & 6), turn both Tilt drag selector (8)
and counterbalance knob (10) to the minimum.
Open completely the Camera plate lock lever (7) to release the Cam-
era plate (1).
Aach the Camera plate (1) under the Camera and ghten the clamp-
ing screw. Center the plate on the Camera, keeping the center of grav-
ity posion in mind.
Place the camera sideways on top of the FOCUS 10, the wedge plate
will lock into place: the Camera plate locking lever (7) will click into an
intermediate posion, so that you can slide the Camera back & forth
to the best posion.
Hold the Camera in horizontal posion with the Pan bar (12) and re-
lease the Tilt brake lever (6). To nd the correct center of gravity posi-
on, slide the Camera plate (1) back & forth ll you have achieved the
desired balance. Lock the Camera plate lever (7) all the way to “ON”
posion.
Set the counterbalance system by turning the balance knob clockwise
(10) to appropriate tension. The Camera has to stay at any lt angle.
Eventually ne-tune by adjusng the sliding plate.
Unlock the Pan brake lever (5) and set the Fluid drag control by adjust-
ing selectors (4 & 8).
When spirit bubble light fails it is me to replace the baeries (9). Pull
out the baery tray.
For easy mounng on a slider, the threaded sha on the head bowl
can be removed with a 10 mm allen key and a 3/8 inch threaded hole
will allow the connecon.
Minimum payload 0 Kg 0 lbs
Maximum payload 11 Kg 24.3 lbs
Weight 2 Kg 4.4 lbs
Bowl diameter 100 mm
Fluid control Connuous
Counterbalance Connuous
Pan range 360°
Tilt range +/- 90°
Temperature range -40 / +60 °C -40 / +140 °F
3. procedUreS
4. SpecIfIcatIonS
10 11
5. maIntenance
6. Warranty
With indoor use - when needed - just clean the FOCUS 10 and Tripod
with a so cloth. Dirt accumulated during storage may be removed using a
brush or Air spray.
CARTONI products main mechanisms are sealed as they are also built
for professional outdoor use.
However, use under rough condions will require special care. Salt water
is very corrosive and can cause extreme damages. In atempt to avoid fur-
ther damage the Fluid Head should be washed o with fresh water at the
earliest opportunity and dried before storage.
Sand and dirt are abrasive and should be removed using a semi-s
brush or Air spray.
Disconnect spirit level baery during long term storage.
All CARTONI Fluid Heads & Pedestals have a free of charge three (3)
year warranty. Register your product at www.cartoni.com within 30 days
from date of rst purchase/invoice to receive further two (2) year warranty
for the unsurpassed free ve (5) year warranty.
Tripods, spreaders, dollies and all accessories are guaranteed one (1)
year from the date of rst purchase/invoice.
CARTONI warrant that the product supplied will - under proper use -
be free from defects in workmanship and materials and agrees that it will,
at its opon, either repair or replace any defecve part within duraon of
warranty from date of rst purchase with no labour charge.
This warranty does not apply to any CARTONI product that has been
damaged in shipping or handling, abused, misused, operated contrary to
instrucons for use, neglected, normal wear or tear, modied or changed in
design or construcon or serviced by unauthorized pares.
Repairs or misuse by any unauthorized pares will void this warranty.
Warranty claims must be submied – in wring - to the factory for veri-
caon or to an authorized distributor/dealer designated by CARTONI.
It is the end user’s responsibility when ordering to ensure that the prod-
ucts ordered conform to his requirements.
All freight of product to CARTONI must be prepaid. All implied war-
ranes are limited to the me period set forth herein & subject to change
without noce.
No liability can be accepted for any variaon.
For the complete Accessories list & Product line please visit CARTONI’s
ocial website www.cartoni.com.
Every product has an updated list of compable items sorted by groups,
with descripons and technical data.
7. acceSSorIeS & prodUct lIne
CARTONI S.p.A
Via di Portonaccio, 33/B - 00159 Rome (Italy)
Phone +39 06 4382002
Fax +39 06 43588293
Email: [email protected]
www.cartoni.com
PROFESSIONAL CAMERA SUPPORT
Manual Version: 2.3 - Issue date: June 2021
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Cartoni Focus 10 Fluid Video Head Manuale utente
- Categoria
- Treppiedi
- Tipo
- Manuale utente
- Questo manuale è adatto anche per