Yamaha NP-30 Manuale del proprietario

Marca: Yamaha

Modello: NP-30

Categoria: Tastiere MIDI

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

YNP-25

NP-30

YNP-25

Digital Keyboard

Owner’s Manual

NP-30/YNP-25 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). DO

NOT connect this product to any power supply or adapter other than one

described in the manual, on the name plate, or speciﬁcally recom-

mended by Yamaha.

WARNING: Do not place this product in a position where anyone could

walk on, trip over, or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! If you must use

an extension cord, the minimum wire size for a 25’ cord (or less) is 18

AWG. NOTE: The smaller the AWG number, the larger the current han-

dling capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at the

time of printing. However, Yamaha reserves the right to change or modify

any of the speciﬁcations without notice or obligation to update existing

units.

This product, either alone or in combination with an ampliﬁer and head-

phones or speaker/s, may be capable of producing sound levels that

could cause permanent hearing loss. DO NOT operate for long periods

of time at a high volume level or at a level that is uncomfortable. If you

experience any hearing loss or ringing in the ears, you should consult an

audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory mounting

ﬁxtures that are either supplied with the product or as optional accesso-

ries. Some of these items are designed to be dealer assembled or

installed. Please make sure that benches are stable and any optional ﬁx-

tures (where applicable) are well secured BEFORE using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are not

covered by the manufacturer’s warranty, and are therefore the owners

responsibility. Please study this manual carefully and consult your dealer

before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and environ-

mentally friendly. We sincerely believe that our products and the produc-

tion methods used to produce them, meet these goals. In keeping with

both the letter and the spirit of the law, we want you to be aware of the

following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately ﬁve years. When replacement becomes necessary,

contact a qualiﬁed service representative to perform the replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, do not mix batteries with new, or with batteries

of a different type. Batteries MUST be installed correctly. Mismatches or

incorrect installation may result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all batter-

ies away from children. Dispose of used batteries promptly and as regu-

lated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some reason

its useful life is considered to be at an end, please observe all local,

state, and federal regulations that relate to the disposal of products that

contain lead, batteries, plastics, etc. If your dealer is unable to assist

you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model num-

ber, serial number, power requirements, etc., are located on this plate.

You should record the model number, serial number, and the date of pur-

chase in the spaces provided below and retain this manual as a perma-

nent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

NP-30/YNP-25 Owner’s Manual

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modiﬁcations not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line ﬁlter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact

Yamaha Corporation of America, Electronic Service Division, 6600

Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

FCC INFORMATION (U.S.A.)

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

Entsorgung leerer Batterien (nur innerhalb Deutschlands)

Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien

oder Akkumulatoren dürfen nicht in den Hausmüll. Sie können bei

einer Sammelstelle für Altbatterien bzw. Sondermüll abgegeben wer-

den. Informieren Sie sich bei Ihrer Kommune.

(class B)

(battery)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den

ar ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspæendingen til dette apparat er IKKE afbrudt,

sålæenge netledningen siddr i en stikkontakt, som er t endt — også

selvom der or slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

(standby)

IMPORTANT NOTICE FOR THE UNITED KINGDOM

Connecting the Plug and Cord

IMPORTANT. The wires in this mains lead are coloured in accor-

dance with the following code:

BLUE : NEUTRAL

BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured makings identifying the ter-

minals in your plug proceed as follows:

The wire which is coloured BLUE must be connected to the ter-

minal which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the

terminal which is marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth terminal

of the three pin plug.

• This applies only to products distributed by Yamaha-Kemble

Music (U.K.) Ltd.

(2 wires)

NP-30/YNP-25 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, ﬁre or other hazards. These precautions include, but are not limited to, the following:

• Only use the voltage speciﬁed as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the speciﬁed adaptor (PA-5D, PA-150 or an equivalent recommended by

Yamaha) only. Using the wrong adaptor can result in damage to the instrument

or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• Do not place the AC adaptor cord near heat sources such as heaters or radiators,

and do not excessively bend or otherwise damage the cord, place heavy objects

on it, or place it in a position where anyone could walk on, trip over, or roll

anything over it.

• Do not open the instrument or attempt to disassemble the internal parts or

modify them in any way. The instrument contains no user-serviceable parts. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualiﬁed Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might spill into

any openings. If any liquid such as water seeps into the instrument, turn off the

power immediately and unplug the power cord from the AC outlet. Then have the

instrument inspected by qualiﬁed Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a ﬁre.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a

sudden loss of sound during use of the instrument, or if any unusual smells or

smoke should appear to be caused by it, immediately turn off the power switch,

disconnect the adaptor plug from the outlet, and have the instrument inspected

by qualiﬁed Yamaha service personnel.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• Always make sure all batteries are inserted in conformity with the +/- polarity

markings. Failure to do so might result in overheating, ﬁre, or battery ﬂuid

leakage.

• Always replace all batteries at the same time. Do not use new batteries together

with old ones. Also, do not mix battery types, such as alkaline batteries with

manganese batteries, or batteries from different makers, or different types of

batteries from the same maker, since this can cause overheating, ﬁre, or battery

ﬂuid leakage.

• Do not dispose of batteries in ﬁre.

• Do not attempt to recharge batteries that are not intended to be charged.

• When the batteries run out, or if the instrument is not to be used for a long time,

remove the batteries from the instrument to prevent possible leakage of the

battery ﬂuid.

• Keep batteries away from children.

• If the batteries do leak, avoid contact with the leaked ﬂuid. If the battery ﬂuid

should come in contact with your eyes, mouth, or skin, wash immediately with

water and consult a doctor. Battery ﬂuid is corrosive and may possibly cause

loss of sight or chemical burns.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or

heat (such as in direct sunlight, near a heater, or in a car during the day) to

prevent the possibility of panel disﬁguration or damage to the internal

components.

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile

phone, or other electric devices. Otherwise, the instrument, TV, or radio may

generate noise.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor

Battery

Location

(4)-12 1/2

NP-30/YNP-25 Owner’s Manual

• Before moving the instrument, remove all connected adaptor and other cables.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the

power switch and disconnect the plug from the outlet. Even when the power

switch is turned off, electricity is still ﬂowing to the product at the minimum

level. When you are not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

• Use only the stand speciﬁed for the instrument. When attaching the stand or

rack, use the provided screws only. Failure to do so could cause damage to the

internal components or result in the instrument falling over.

• Do not place objects in front of the instrument’s air vent, since this may prevent

adequate ventilation of the internal components, and possibly result in the

instrument overheating.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum. Also, be sure to set the volumes of all

components at their minimum levels and gradually raise the volume controls

while playing the instrument to set the desired listening level.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners,

solvents, cleaning ﬂuids, or chemical-impregnated wiping cloths.

• Do not insert a ﬁnger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel

or keyboard. If this happens, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualiﬁed

Yamaha service personnel.

• Do not place vinyl, plastic or rubber objects on the instrument, since this might

discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

Always turn the power off when the instrument is not in use.

When using a power adaptor, even when the power switch is in the “STANDBY” position, electricity is still ﬂowing to the instrument at the minimum level. When you are not

using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

Connections

Maintenance

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the instrument.

PRECAUTIONS

(4)-12 2/2

NP-30/YNP-25 Owner’s Manual

Introduction

Thank you for purchasing the Yamaha NP-30/YNP-25!

We recommend that you read this manual carefully

so that you can fully take advantage of the advanced and

convenient functions of the NP-30/YNP-25.

We also recommend that you keep this manual in a safe and

handy place for future reference.

Main Features

Graded Touch Keyboard

Features well balanced weight gradations of the keys—heavy in the lower end, light in the upper keys.

AWM Stereo Sampling

The Yamaha NP-30/YNP-25 offers unmatched sonic realism and natural grand-piano type playability as well as

Yamaha’s original “AWM Stereo Sampling” tone-generation technology for rich, musical voices.

In particular, the Grand Piano 1 and 2 voices feature samples painstakingly recorded from a full concert grand piano,

while the Electric Piano 1 and 2 voice features multiple samples for different velocities (Dynamic Sampling); in other

words, it uses different samples depending on the strength of your playing.

NP-30/YNP-25 Owner’s Manual

About this Owner’s Manual

This manual consists of three main sections: Introduction, Reference and Appendix.

Introduction (page 6):

Please read this section ﬁrst.

Reference (page 14):

This section explains how to make detailed settings for the instrument’s various functions.

Appendix (page 28):

This section features a variety of essential, detailed information on the instrument.

*The illustrations as shown in this owner’s manual are for instructional purposes only, and may appear somewhat different from

those on your instrument.

*Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited

except for your personal use.

*For the sake of simplicity, both models NP-30 and NP-30S are hereafter referred to in this Owner’s Manual as NP-30.

•The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective

companies.

Accessories

• Owner’s Manual

This manual contains complete instructions for operating your instrument.

• Quick Operation Guide

• Music Rest

This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to

which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style

ﬁles, MIDI ﬁles, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of

personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE

OR USE ILLEGAL COPIES.

NP-30/YNP-25 Owner’s Manual

Tab le of Contents

Introduction

Main Features...............................................................................................6

About this Owner’s Manual .........................................................................7

Accessories ...................................................................................................7

Application Index .........................................................................................9

Panel Controls and Terminals....................................................................10

Before Using...............................................................................................11

Power Requirements ................................................................................................... 11

Turning the Power On ................................................................................................ 12

Setting the Volume...................................................................................................... 13

Using the Pedal ............................................................................................................ 13

Using Headphones ...................................................................................................... 13

Music Rest.................................................................................................................... 13

Reference

Listening to the Demo Songs ....................................................................14

Listening to the Piano Preset Songs..........................................................15

Using the Metronome................................................................................16

Selecting & Playing Voices.........................................................................18

Selecting Voices ........................................................................................................... 18

Combining Voices (Dual)........................................................................................... 19

Adding Variations to the Sound – Reverb ................................................................. 20

Transposition............................................................................................................... 21

Fine tuning of the Pitch............................................................................................... 21

Touch Sensitivity ......................................................................................................... 22

Connecting MIDI Instruments ...................................................................23

Connecting MIDI [IN] [OUT] terminals .................................................................. 23

MIDI’s Capability ........................................................................................................ 23

Connecting a Personal Computer .............................................................................. 24

MIDI Functions ...........................................................................................25

MIDI Transmit/Receive Channel Selection ............................................................... 25

Local Control ON/OFF ............................................................................................... 25

Program Change ON/OFF.......................................................................................... 26

Control Change ON/OFF ........................................................................................... 26

Troubleshooting.........................................................................................27

Optional Equipment...................................................................................27

Appendix

MIDI Data Format ......................................................................................28

MIDI Implementation Chart ......................................................................32

Specifications .............................................................................................34

Index...........................................................................................................35

NP-30/YNP-25 Owner’s Manual

Application Index

Use this index to ﬁnd reference pages that may be helpful for your particular application and situation.

Listening

Listening to demo songs with different voices.....................................................................Listening to the Demo Songs on page 14

Playing

Using the sustain pedal ............................................................................................................................... Using the Pedal on page 13

Changing the key of the NP-30/YNP-25 to facilitate playing in difﬁcult/unfamiliar key signatures ........Transposition on page 21

Fine tuning the pitch of the entire instrument when you play the instrument along with other instruments or CD music

.........................................................................................................................................................Fine tuning of the Pitch on page 21

Selecting a touch sensitivity type............................................................................................................. Touch Sensitivity on page 22

Using a built-in metronome............................................................................................................ Using the Metronome on page 16

Changing voices

Viewing the list of voices ............................................................................................................................Selecting Voices on page 18

Simulating a concert hall ..................................................................................Adding Variations to the Sound – Reverb on page 20

Combining two voices ............................................................................................................... Combining Voices (Dual) on page 19

Connecting the NP-30/YNP-25 to other devices

What is MIDI?..................................................................................................................................................About MIDI on page 23

Connecting a computer ................................................................................................ Connecting a Personal Computer on page 24

Panel Controls and Terminals

NP-30/YNP-25 Owner’s Manual

Panel Controls and Terminals

1 [STANDBY/ON] switch ................ page 11

For turning the power on or off.

2 [MASTER VOLUME] slider ........... page 13

For adjusting the volume level of the entire sound.

3 [METRONOME ON/OFF] button

..................................................... page 16

For using the metronome.

4 [SONG

] button................ page 14, 15

For playing the demo songs and the piano preset

songs.

5 [GRAND PIANO] button

..........................................page 18-20, 22

For selecting voices from 10 internal sounds includ-

ing Grand Piano 1 and 2 (page 18). You can also

combine two voices (page 19) or add reverb effects to

the selected voice for your keyboard performance

(page 20).

6 VOICE/SONG [BACK<<], [>>NEXT]

button ............................ pages 14, 15, 18

While playing a voice demo or piano preset song,

pressing these buttons can be selected next or previ-

ous song. These buttons can be also changed a voice.

7 [SUSTAIN] jack .............................page 13

For connecting an optional pedal (FC5), FC3 foot

pedal or FC4 foot switch.

8 MIDI [IN] [OUT] terminals ...........page 23

For connecting external MIDI devices, allowing the

use of various MIDI functions.

9 [PHONES/OUTPUT] jack ..............page 13

For connecting a set of standard stereo headphones,

allowing private practice.

) [DC IN 12V] jack...........................page 11

For connecting the power adaptor.

12 345

Shows the jacks and terminals

as seen when viewed from the

rear of the instrument.

Shows the jacks and terminals

as seen when viewed from the

rear of the instrument.

Before Using

NP-30/YNP-25 Owner’s Manual

Before Using

Be sure to do the following operations BEFORE turning on the power.

Power Requirements

Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recom-

mends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly

than batteries and does not deplete resources.

Using an AC Power Adaptor...............................................................

1. Make sure that the [STANDBY/ON] switch

of the instrument is set to STANDBY.

WARNING

Use the speciﬁed adaptor (PA-5D, PA-150, or an equivalent recom-

mended by Yamaha) only. The use of other adaptors may result in

irreparable damage to both the adaptor and the instrument.

2. Connect the AC adaptor to the power sup-

ply jack.

3. Plug the AC adaptor into an AC outlet.

CAUTION

Unplug the AC Power Adaptor when not using the instrument, or

during electrical storms.

CAUTION

Even when the instrument is turned off, electricity is still ﬂowing to

the instrument at the minimum level.

When you are not using the instrument for a long time, make sure

you unplug the AC power adaptor from the wall AC outlet.

unlit

AC outletAdaptor

Before Using

NP-30/YNP-25 Owner’s Manual

Using Batteries ....................................................................................

1. Open the battery compartment cover

located on the instrument’s bottom panel.

2. Insert the six new alkaline batteries, being

careful to follow the polarity markings on

the side of the compartment.

3. Replace the compartment cover, making

sure that it locks ﬁrmly in place.

For battery operation the instrument requires six 1.5V

“AA” size, LR6 or equivalent batteries. (Alkaline batter-

ies are recommended.) When battery power becomes

too low for proper operation, the volume may be

reduced, the sound may be distorted, and other prob-

lems may occur. When this happens, make sure to

replace all batteries, following the precautions listed

below.

CAUTION

Use alkaline batteries for this instrument. Other types of batteries

(including rechargeable batteries) may have sudden drops of power

when battery power becomes low.

Make sure to install the batteries with the proper orientation, main-

taining the correct polarity (as shown). Incorrect battery installation

may result in heat, ﬁre and/or leaking of corrosive chemicals.

When the batteries run down, replace them with a complete set of six

new batteries. NEVER mix old and new batteries. Do not use different

kinds of batteries (e.g. alkaline and manganese) at the same time.

If the instrument is not to be in use for a long time, remove the bat-

teries from it, in order to prevent possible ﬂuid leakage from the bat-

tery.

Tur ning the Power On

Press the [STANDBY/ON] switch to turn on the power.

The power indicator located to the left of the [STANDBY/ON] switch

lights up.

Pressing the switch again turns the power off.

CAUTION

When using a power adaptor, even when the power is off, a small amount of

electricity is still being consumed by the instrument. When you are not using

the instrument for a long time, make sure to unplug the AC power adaptor

from the wall AC outlet, and/or remove the batteries from the instrument.

Never connect or disconnect the AC power adaptor when the

power is on and the batteries are installed. Doing so will turn

the power off.

NOTE

Before Using

NP-30/YNP-25 Owner’s Manual

Setting the Volume

Initially set the [MASTER VOLUME] slider about halfway between the

“MIN” and “MAX” settings. Then, when you start playing, re-adjust the

[MASTER VOLUME] slider to the most comfortable listening level.

Using the Pedal

[SUSTAIN] jack

This jack is for connecting an optional pedal.

The pedal functions in the same way as a damper pedal on an acoustic

piano. Connect an optional pedal to this jack and press the pedal to sus-

tain the sound.

Do not press the footswitch while turning the power on. Doing this

changes the recognized polarity of the footswitch, resulting in reversed

footswitch operation.

If you connect an optional pedal of FC3, the half pedal function* can be

used.

* half pedal function

While you playing the piano with SUSTAIN and if you need to delete the

cloudy sound, release the foot from pedal to half position.

Using Headphones

Connect a set of headphones to the [PHONES/OUTPUT] jack.

CAUTION

To protect your hearing, avoid listening to the NP-30/YNP-25 at a high vol-

ume level for long periods of time.

Music Rest

The NP-30/YNP-25 includes a music rest that can be attached to the

instrument by inserting it into the slot at the top of the control panel.

CAUTION

Since speakers are built into the instrument you should be careful to never

leave any video tapes, cassette tapes, ﬂoppy disks or any kind of magnetic

storage media on the panel—doing so may result in data loss or damage to

the items. Also avoid using the instrument near a television or computer

monitor, since interference may result.

TERMINOLOGY

MASTER VOLUME:

The volume level of the entire keyboard sound

Make sure that power is OFF when connecting or disconnecting the

pedal.

The level increases.The level decreases.

FC5

NOTE

Listening to the Demo Songs

NP-30/YNP-25 Owner’s Manual

Listening to the Demo Songs

Demo songs are provided that effectively demonstrate each of the voices.

1. Press the [STANDBY/ON] switch to turn the power

on.

When the power is turned ON, the power indica-

tor located to the left of the [STANDBY/ON]

switch lights up.

2. Adjust the volume.

Initially set the [MASTER VOLUME] slider about

half way between the “MIN” and “MAX” settings.

Then, when you start playing, re-adjust the

[MASTER VOLUME] slider to the most comfort-

able listening level.

3. Press the [SONG

] button to lis-

ten to the demo songs.

The GRAND PIANO 1 demo song will start. Demo

songs provided for each voice and the piano preset

songs will play back in sequence until you press the

[SONG

] button.

Changing a Demo Song

You can change to another demo song during play-

back by pressing the VOICE/SONG [BACK<<] or

[>>NEXT]

button. For selecting a demo song using

the keyboard, press one of the C1–A1 keys while

holding down the [SONG

] button.

Demo Song List

• The demonstration pieces listed above are short rearranged excerpts of the original

compositions.

4. Press the [SONG

] button to

stop the voice demo.

Refer to the voice list on page 18

for more information on the char-

acteristics of each preset voice.

The demo songs will not be trans-

mitted via MIDI.

NOTE

KeyVoice Name Title Composer

G1 HARPSICHORD 1 Gavotte J.S. Bach

G#1 HARPSICHORD 2 Invention No. 1 J.S. Bach

C1 A1

Reference

Listening to the Piano Preset Songs

NP-30/YNP-25 Owner’s Manual

Listening to the Piano Preset Songs

The NP-30/YNP-25 provides performance data for piano songs as well as voice demo songs, for

your listening pleasure.

1. While holding down the [SONG

] button, press

one of the C2–A2 keys to select a song to play back.

The number of each piano preset song is assigned to the C2–A2 keys.

While holding down the [SONG

] button, press the A#2 key to play all preset

songs consecutively in sequence.

Piano Preset Song List

Press the VOICE/SONG [BACK<<] or [>>NEXT] but-

ton to change to the next piano song.

2. Press the [SONG

] button to

stop playback.

To continue playing other songs, see step 1 above.

TERMINOLOGY

Song:

On the NP-30/YNP-25, perfor-

mance data is called a “Song.”

This includes demonstration

tunes and piano preset tunes.

Preset:

Preset Data supplied with the

internal memory of the NP-30/

YNP-25 shipped from the factory.

You can play the keyboard along

with the preset song. You can

change the voice playing on the

keyboard.

When you select a different song

(or a different song is selected

during chained playback), an

appropriate reverb type will be

selected accordingly.

The piano preset songs are not

transmitted via MIDI.

NOTE

No. Title Composer

1 Menuett G dur BWV.Anh.114 J.S. Bach

2Turkish March (Piano Sonate No.11 K.331) W.A. Mozart

3 Für Elise L.v. Beethoven

4Valse op.64-1 “Petit chien” F.F. Chopin

5Träumerei R. Schumann

6 Dolly’s Dreaming and Awakening T. Oesten

7Arabesque J.F.F. Burgmüller

8 Humoresque A. Dvorák

9 The Entertainer S. Joplin

10 La Fille aux Cheveux de Lin C.A. Debussy

C1 C2 A2

ALL

Using the Metronome

NP-30/YNP-25 Owner’s Manual

Using the Metronome

This instrument features a built-in metronome (a device that keeps an accurate tempo) that is con-

venient for practicing.

1. Press the [METRONOME ON/OFF]

button to turn on the metronome.

Start the metronome.

Determine the time signature

While holding down the [METRONOME ON/OFF] button, press one of the C3–

F3 keys.

The ﬁrst beat is accented with a bell sound and the rest with clicks.

Default set is 0/4 (C3). In this setting, clicks sound in all beats.

Adjust the Tempo

The tempo of the metronome and song playback can be set from 32 to 280 beats

per minute.

A number is assigned to each of the following keys.

While holding down the [METRONOME ON/OFF] button, press a sequence of

C4–A4 keys to specify a three-digit number.

Select a number starting from the left-most digit. For example, to set the tempo

“95,” press the C4 (0), A4 (9) and F4 (5) keys in sequence.

Key Time signature

C3 0/4

C#3 2/4

D3 3/4

D#3 4/4

E3 5/4

F3 6/4

C3 F3C1 C2

A4C4 C5 C6

Using the Metronome

NP-30/YNP-25 Owner’s Manual

Increasing the tempo value in steps of one:

While holding down the [METRONOME ON/OFF] button, press the C#5 key.

Decreasing the tempo value in steps of one:

While holding down the [METRONOME ON/OFF] button, press the B4 key.

Increasing the tempo value in steps of ten:

While holding down the [METRONOME ON/OFF] button, press the D5 key.

Decreasing the tempo value in steps of ten:

While holding down the [METRONOME ON/OFF] button, press the A#4 key.

Resetting the tempo to default:

While holding down the [METRONOME ON/OFF] button, press the C5 key.

Adjusting the volume

You can change the volume of the metronome sound.

While holding down the [METRONOME ON/OFF] button, press one of the C1–

G2 keys to determine the volume.

Pressing a higher key in the key range results in a higher volume, while pressing

a lower key results in lower volume.

2. Press the [METRONOME ON/OFF]

button to stop the Metronome.

D5 (+10)

B4 (-1)

A#4 (-10)

C#5 (+1)

A#4

C5 (default)

Metronome volume range:

C1 (1)–G2 (20)

Default setting: A1 (10)

NOTE

(1)

(20)

Selecting & Playing Voices

NP-30/YNP-25 Owner’s Manual

Selecting & Playing Voices

Selecting Voices

1. While holding down the [GRAND PIANO] button,

press one of the C1–A1 keys to select a voice.

Pressing the VOICE/SONG [BACK<<] or [>>NEXT]

button switches among the following ten voices.

2. Adjust the volume.

Re-adjust the [MASTER VOLUME] slider for the most comfortable listening

level during your performance.

C1 A1

To familiarize yourself with the

characteristics of the voices, lis-

ten to the demo songs for each

voice (page 14).

TERMINOLOGY

Voice:

On the NP-30/YNP-25, the term

“voice” means “instrument

sound.”

When you select a voice, an

appropriate reverb type will be

selected automatically (page 20).

NOTE

KeyVoice Name Description

C1 Grand Piano 1

Recorded samples from a full concert grand piano. Perfect for clas-

sical compositions as well as any other style that requires acoustic

piano.

C#1Grand Piano 2 Clear piano with bright reverb. Good for popular music.

D1 E. Piano 1 An electronic piano sound created by FM synthesis. Good for

popular music.

D#1E. Piano 2

The sound of an electric piano using hammer-struck metallic “tines.”

Soft tone when played lightly, and an aggressive tone when played

hard.

E1 Church Organ 1

This is a typical pipe organ sound (8' + 4' + 2'). Good for sacred music

from the Baroque period.

F1 Church Organ 2

This is the organ’s full coupler sound, often associated with Bach’s

“Toccata and Fugue.”

F#1

Strings Spacious and large-scale string ensemble. Try combining this voice

with piano in DUAL.

G1 Harpsichord 1

The deﬁnitive instrument for baroque music. Since the strings of a

harpsichord are plucked, there is no touch response.

G#1 Harpsichord 2

Mixes the same voice an octave higher for a more brilliant tone.

A1 Vibraphone

The sound of a vibraphone played with relatively soft mallets.

Selecting & Playing Voices

NP-30/YNP-25 Owner’s Manual

Combining Voices (Dual)

You can play voices simultaneously across the entire range of the keyboard. In this way, you can

combine similar voices to create a thicker sound.

1. While holding down the [GRAND PIANO] button,

press two keys in the range of C1 through A1 simul-

taneously (or press one key while holding another)

to engage Dual.

Refer to “Selecting Voices” on page 18 for more information on the voices that

are assigned to the keys.

The voice assigned to the lower key will be designated as Voice 1, and the voice

assigned to the higher key will be designated as Voice 2.

You can make the following settings for Voices 1 and 2 in Dual:

Setting the Octave

You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde-

pendently. Depending on which voices you combine in Dual, the combination

may sound better if one of the voices is shifted up or down an octave.

While holding down the [GRAND PIANO] button, press one of the C4–F4 keys.

Setting the Balance

You can adjust the volume balance between two voices. For example, you can set

one voice as the main voice with a louder setting, and make the other voice softer.

While holding down the [

GRAND

PIANO] button, press one of the F#4–F#5

keys.

A setting of “0” produces an equal balance between the two Dual voices. Settings

below “0” increase the volume of Voice 2 in relation to Voice 1, and settings above

“0” increase the volume of Voice 1 in relation to Voice 2.

2. While holding down the [GRAND PIANO] button,

press one of the C1–A1 keys (or press the [GRAND

PIANO/VOICE] button) to exit Dual and return to

the normal single-voice play.

Reverb in Dual

The reverb type assigned to

Voice 1 will take priority. If the

reverb assigned to Voice 1 is set

to OFF, the reverb assigned to

Voice 2 will be in effect.

NOTE

Voice 1

C4 -1

Voice 2

D#4-1

C#40 E4 0

D4 +1 F4 +1

C1 A1

F4 C5 C6C4

Voice 2Voice 1

C5(0) C6C4

F#5 (+6)F#4 (-6)

Selecting & Playing Voices

NP-30/YNP-25 Owner’s Manual

Adding Variations to the Sound – Reverb

This control enables you to select four different types of reverb effect that add extra depth and

expression to the sound to create a realistic acoustic ambience.

Selecting a Reverb Type

While holding down the [GRAND PIANO] button, press one of the C2–E2 keys

to select a reverb type.

Adjusting Reverb Depth

While holding down the [GRAND PIANO] button, press one of the C3–A#3

keys to adjust the reverb depth for the selected voice.

While holding down the [GRAND PIANO] button, press the B3 key to set the

reverb to the depth most suitable for the selected voice.

KeyReverb Type Description

C2 Room This setting adds a continuous reverb effect to the sound, similar to the

acoustic reverberation you would hear in a room.

C#2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates

the natural reverberation of a small-size concert hall.

D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect sim-

ulates the natural reverberation of a large concert hall.

D#2 Stage Simulates the reverb of a stage environment.

E2 Off No effect is applied.

C1 C2 E2

Reverb depth range:

0 (no effect)–

10 (maximum depth)

NOTE

B3C1 C2

The depth value increases as you press higher keys.

A#3: depth 10

C3: depth 0

The default reverb type (including

OFF) and depth settings are dif-

ferent for each voice.

NOTE

La pagina sta caricando ...

Yamaha NP-30 Manuale del proprietario

Marca: Yamaha

Modello: NP-30

Categoria: Tastiere MIDI

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

YNP-25

Scarica il pdf

rapporto

in altre lingue

English: Yamaha NP-30 Owner's manual
français: Yamaha NP-30 Le manuel du propriétaire
español: Yamaha NP-30 El manual del propietario
Deutsch: Yamaha NP-30 Bedienungsanleitung
русский: Yamaha NP-30 Инструкция по применению
Nederlands: Yamaha NP-30 de handleiding
português: Yamaha NP-30 Manual do proprietário
dansk: Yamaha NP-30 Brugervejledning
čeština: Yamaha NP-30 Návod k obsluze
polski: Yamaha NP-30 Instrukcja obsługi
svenska: Yamaha NP-30 Bruksanvisning
Türkçe: Yamaha NP-30 El kitabı
suomi: Yamaha NP-30 Omistajan opas
română: Yamaha NP-30 Manualul proprietarului

Yamaha NP-30 Manuale del proprietario

Questo manuale è adatto anche per

Yamaha NP-30 Manuale del proprietario

in altre lingue

Documenti correlati