Yamaha Audio WXA-50 Manuale utente

Tipo
Manuale utente

Questo manuale è adatto anche per

UCABGLV
EN
FR
ES
Owners Manual (Basic)
For more information about operating this product, refer to the Owners Manual (Advanced).
The latest Owner’s Manual (Advanced) can be downloaded from the following website.
http://download.yamaha.com/
Mode demploi (Basique)
Pour en savoir plus sur le fonctionnement de ce produit, reportez-vous au Mode d’emploi (Avancé).
Vous pouvez télécharger le Mode d’emploi (Avancé) le plus récent depuis le site Web suivant.
http://download.yamaha.com/
Manual de instrucciones (Básico)
Si desea obtener más información sobre el uso de este producto, consulte el Manual de
instrucciones (Avanzado).
El último Manual de instrucciones (Avanzado) puede descargarse en el siguiente sitio web.
http://download.yamaha.com/
WIRELESS STREAMING PRE-AMPLIFIER
PRÉAMPLIFICATEUR STREAMING SANS FIL
WIRELESS STREAMING AMPLIFIER
AMPLIFICATEUR STREAMING SANS FIL
1
En
IMPORTANT SAFETY INSTRUCTIONS
12 Use only with the cart, stand, tripod, bracket,
or table specied by the manufacturer, or sold
with the apparatus. When a
cart is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long
periods of time.
14 Refer all servicing to qualied service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
• Explanation of Graphical Symbols
The lightning ash with
arrowhead symbol, within an
equilateral triangle, is intended
to alert you to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufcient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert you to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not t into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specied by
the manufacturer.
The remote control supplied with this product
contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause
severe internal burns in just 2 hours and can
lead to death.
Keep new and used batteries away from
children. If the battery compartment does not
close securely, stop using the product and keep
it away from children.
If you think batteries might have been
swallowed or placed inside any part of the body,
seek immediate medical attention.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TOREDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING
DO NOT INGEST BATTERY, CHEMICAL
BURN HAZARD
CAUTION
Replace only with the same type or equivalent type.
Risk of explosion if battery is incorrectly replaced.
2
En
EN
We Want You Listening For A Lifetime
Yamaha and the Electronic
Industries Association’s Consumer
Electronics Group want you to get
the most out of your equipment by
playing it at a safe level. One that
lets the sound come through loud
and clear without annoying blaring or distortion
– and, most importantly, without affecting your
sensitive hearing. Since hearing damage from
loud sounds is often undetectable until it is
too late, Yamaha and the Electronic Industries
Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure
from excessive volume levels.
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT
MODIFY THIS UNIT!
This product, when installed as indicated in
the instructions contained in this manual,
meets FCC requirements. Modications not
expressly approved by Yamaha may void
your authority, granted by the FCC, to use
the product.
2 IMPORTANT: When connecting this
product to accessories and/or another
product use only high quality shielded
cables. Cable/s supplied with this product
MUST be used. Follow all installation
instructions. Failure to follow instructions
could void your FCC authorization to use
this product in the USA.
3 NOTE: This product has been tested and
found to comply with the requirements listed
in FCC
Regulations, Part 15 for Class “B” digital
devices. Compliance with these requirements
provides a reasonable level of assurance
that your use of this product in a residential
environment will not result in harmful
interference with other electronic devices.
This equipment generates/uses radio
frequencies and, if not installed and used
according to the instructions found in the
users manual, may cause interference harmful
to the operation of other electronic devices.
Compliance with FCC regulations does not
guarantee that interference will not occur in all
installations. If this product is found to be the
source of interference, which can be determined
by turning the unit “OFF” and “ON, please
try to eliminate the problem by using one of the
following measures:
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug
to wide slot and fully insert.
CAN ICES-3(B)/NMB-3(B).
IMPORTANT
Please record the serial number of this unit in
the space below.
MODEL:
Serial No.:
The serial number is located on the bottom of
the unit. Retain this Owner’s Manual in a safe
place for future reference.
Relocate either this product or the device that is
being affected by the interference.
Utilize power outlets that are on different
branch (circuit breaker or fuse) circuits or
install AC line lter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is
300 ohm ribbon lead, change the lead-in to
coaxial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local
retailer authorized to distribute this type of
product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation
of America A/V Division, 6600 Orangethorpe
Avenue, Buena Park, CA 90620, USA.
The above statements apply ONLY to those
products distributed by Yamaha Corporation of
America or its subsidiaries.
3
En
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party:
Yamaha Corporation of America A/V Division
Address:
6600 Orangethorpe Avenue, Buena Park, CA
90620
Telephone:
714-522-9011
Type of Equipment:
Wireless Streaming Amplier,
Wireless Streaming Pre-Amplier
Model Name:
WXA-50, WXC-50
This device complies with Part 15 of FCC Rules and
Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)this device may not cause interference, and
(2)this device must accept any interference,
including interference that may cause undesired
operation of this device.
FCC CAUTION
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/
TV technician for help.
NOTICE
Changes or modications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Do not use this unit within 22 cm (9 inches)
of persons with a heart pacemaker implant or
debrillator implant.
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio
frequency (RF) Exposure Guidelines and RSS-
102 of the IC radio frequency (RF) Exposure
rules. This equipment should be installed and
operated keeping the radiator at least 20cm or
more away from person’s body.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
4
En
EN
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1 To assure the nest performance, please read
this manual carefully. Keep it in a safe place for
future reference.
2 Install this sound system in a well ventilated,
cool, dry, clean place - away from direct
sunlight, heat sources, vibration, dust, moisture,
and/or cold. For proper ventilation, allow the
following minimum clearances.
Top: 10 cm (4 in.), Rear: 10 cm (4 in.),
Sides: 10 cm (4 in.)
3 Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
4 Do not expose this unit to sudden temperature
changes from cold to hot, and do not locate
this unit in an environment with high humidity
(i.e. a room with a humidier) to prevent
condensation inside this unit, which may cause
an electrical shock, re, damage to this unit,
and/or personal injury.
5 Avoid installing this unit where foreign object
may fall onto this unit and/or this unit may be
exposed to liquid dripping or splashing. On the
top of this unit, do not place:
Other components, as they may cause damage
and/or discoloration on the surface of this
unit.
Burning objects (i.e. candles), as they may
cause re, damage to this unit, and/or
personal injury.
Containers with liquid in them, as they may
fall and liquid may cause electrical shock to
the user and/or damage to this unit.
6 Do not cover this unit with a newspaper,
tablecloth, curtain, etc. in order not to obstruct
heat radiation.
If the temperature inside this unit rises, it may
cause re, damage to this unit, and/or personal
injury.
7 Do not plug in this unit to a wall outlet until all
connections are complete.
8 Do not operate this unit upside-down. It may
overheat, possibly causing damage.
9 Do not use force on switches, knobs and/or
cords.
10 When disconnecting the power cable from the
wall outlet, grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents;
this might damage the nish. Use a clean, dry
cloth.
12 Only voltage specied on this unit must be
used. Using this unit with a higher voltage
than specied is dangerous and may cause re,
damage to this unit, and/or personal injury.
Yamaha will not be held responsible for any
damage resulting from use of this unit with a
voltage other than specied.
13 To prevent damage by lightning, keep the power
cable disconnected from a wall outlet or this
unit during a lightning storm.
Radio waves may affect electro-medical
devices. Do not use this unit near medical
devices or inside medical facilities.
This unit is not disconnected from the AC
power source as long as it is connected to the
wall outlet, even if this unit itself is turned off
by A. This state is called the standby mode. In
this state, this unit is designed to consume a
very small quantity of power.
WAR NING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
Notes on remote controls and batteries
Do not spill water or other liquids on the remote
control.
Do not drop the remote control.
Do not leave or store the remote control in the
following conditions:
places of high humidity, such as near a bath
places of high temperatures, such as near a
heater or stove
places of extremely low temperatures
dusty places
Insert the battery according to the polarity
markings (+ and -).
14 Do not attempt to modify or x this unit.
Contact qualied Yamaha service personnel
when any service is needed. The cabinet should
never be opened for any reasons.
15 When not planning to use this unit for long
periods of time (i.e. vacation), disconnect the
AC power plug from the wall outlet.
16 Be sure to refer to the “Troubleshooting”
section of the Owner’s Manual for common
operating errors before concluding that this unit
is faulty.
17 Before moving this unit, press A to set it to
standby mode and disconnect the AC power
plug from the wall outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the
power cable from the outlet, then leave this unit
alone.
19 When using this unit for a long time, this unit
may become warm. Turn the power off, then
leave this unit alone for cooling.
20 Install this unit near the AC outlet and where
the AC power plug can be reached easily.
21 Excessive sound pressure from earphones and
headphones can cause hearing loss.
22 Keep the product out of reach of children to
avoid them swallowing small parts.
5
En
A (Power key)
Turns on the power of this unit or sets it to the
standby mode.
The name plate is located on the bottom of the
unit.
The user shall not reverse engineer, decompile,
alter, translate or disassemble the software used
in this unit, whether in part or in whole. For
corporate users, employees of the corporation
itself as well as its business partners shall
observe the contractual bans stipulated within
this clause. If the stipulations of this clause and
this contract cannot be observed, the user shall
immediately discontinue using the software.
Information for Users on Collection and
Disposal of Old Equipment and Used
Batteries
These symbols on the products,
packaging, and/or accompanying
documents mean that used
electrical and electronic products
and batteries should not be mixed
with general household waste.
For proper treatment, recovery
and recycling of old products and
used batteries, please take them
to applicable collection points,
in accordance with your national
legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products
and batteries correctly, you will
help to save valuable resources
and prevent any potential negative
effects on human health and
the environment which could
otherwise arise from inappropriate
waste handling.
For more information about
collection and recycling of old
products and batteries, please
contact your local municipality,
your waste disposal service or the
point of sale where you purchased
the items.
[Information on Disposal in
other Countries outside the
European Union]
These symbols are only valid in
the European Union. If you wish to
discard these items, please contact
your local authorities or dealer
and ask for the correct method of
disposal.
Note for the battery symbol
(bottom two symbol
examples):
This symbol might be used in
combination with a chemical
symbol. In this case it complies
with the requirement set by
the Directive for the chemical
involved.
Change all batteries if you notice the following
conditions:
the operation range of the remote control
narrows
the transmit indicator does not ash or is dim
If the batteries run out, immediately remove
them from the remote control to prevent an
explosion or acid leak.
If you nd leaking batteries, discard the batteries
immediately, taking care not to touch the
leaked material. If the leaked material comes
into contact with your skin or gets into your
eyes or mouth, rinse it away immediately and
consult a doctor. Clean the battery compartment
thoroughly before installing new batteries.
Do not use old batteries together with new ones.
This may shorten the life of the new batteries or
cause old batteries to leak.
Do not use different types of batteries (such
as alkaline and manganese batteries) together.
Specication of batteries may be different even
though they look the same.
Before inserting new batteries, wipe the
compartment clean.
If the remote control is without batteries for more
than 2 minutes, or if exhausted batteries remain
in the remote control, the contents of the memory
may be cleared. In such a case, install new
batteries and set the remote control code.
Dispose of batteries according to your regional
regulations.
Keep batteries away from children. If a battery
is accidentally swallowed, contact your doctor
immediately.
When not planning to use the remote control for
long periods of time, remove the batteries from
the remote control.
Do not charge or disassemble the supplied
batteries.
The batteries shall not be exposed to excessive
heat such as sunshine, re or like.
6
En
EN
For U.K. customers
If the socket outlets in the home are not suitable
for the plug supplied with this appliance, it should
be cut off and an appropriate 3 pin plug tted. For
details, refer to the instructions described below.
Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN MAINS LEAD ARE
COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead
of this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter N or coloured BLACK. The wire
which is coloured BROWN must be connected
to the terminal which is marked with the letter
L or coloured RED.
Making sure that neither core is connected to
the earth terminal of the three pin plug.
Trademarks
MusicCast is a trademark or registered trademark
of Yamaha Corporation.
The Wi-Fi CERTIFIED™ Logo is a certication
mark of Wi-Fi Alliance
®
.
The Wi-Fi Protected Setup™ Identier Mark is a
certication mark of Wi-Fi Alliance
®
.
The Bluetooth
®
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Yamaha Corporation is under
license.
7
En
What you can do with this unit
Easy-to-use “MusicCast CONTROLLER” application
Home Audio Network with MusicCast
Using the dedicated application “MusicCast CONTROLLER” on your mobile device
such as a smartphone, you can easily configure the unit and play back music to enjoy
various content.
Anywhere in your house, you can also share and enjoy music among all of your rooms
with a variety of MusicCast compatible devices.
Play back music from internet
radio and online streaming
services.
Play back music files stored
on a USB storage device.
Play back TV and
audio devices.
Select the input source, play back music,
and adjust the volume using MusicCast
CONTROLLER.
Play back music files in PCs and
DLNA servers.
WXA-50/WXC-50
8
En
EN
Accessories
Confirm that all the following items are included in the package.
Remote control Power cableWireless antenna
How to use the stands
Remove the insulation sheet
of the remote control.
Connect the wireless antenna and point it upright.
Note
Be careful not to lose the removed feet and screws (there are 4 of each).
Stand×2
Non-skid pads
(6 pads, including 2
spares)
When placing the unit
horizontally, affix the non-
skid pads on the feet.
9
En
Connecting
Connecting speakers (WXA-50)
1234
Precaution for connecting of
the speaker cables
Improper connecting of the speaker
cables may cause a short circuit and also
damage the unit or the speakers.
Twist the bare wires of the speaker
cables rmly together.
Do not let the core wires of the speaker
cable touch one another.
Do not let the core wires of the speaker
cable come into contact with the unit’s
metal parts (rear panel and screws).
Follow the procedure below for preparations.
Note
Some Yamaha subwoofers
supporting the trigger function are
controlled in power synchronization
with the unit.
Subwoofer
L R
10 mm
(3/8")
10
En
EN
Connecting audio devices (WXC-50)
Volume control by the unit and
MusicCast CONTROLLER
Volume control by audio
devices
Note
In case of setting the switch to “PLAYER”, the
unit outputs audio at maximum volume.
Notice
Set the power to Standby when flipping this switch.
Mini-systems /
Hi-Fi components
Connecting a Yamaha Hi-Fi amplier (A-S series)
In the following connection setup, when the power of the unit is switched to On or
Standby, the power of the A-S series amplifier also switches automatically.
For more information about this
function, refer to the Owner’s
Manual of the A-S series
amplier.
Note
Commercially-available cables are required for this connection setup.
Stereo pin cable (RCA cable)
(Example) A-S1100
Monaural mini-plug cable
11
En
Connecting the power cable
■ Connecting to a network
Connecting to the wireless
network
Connecting to the wired network
Note
When playing back a high-resolution audio source via
the network, we recommend connecting with a wired
router.
Setting the power to On/Standby
Use the z (Power) key on the front panel or on the remote control to switch the unit's
power between On and Standby.
12
En
EN
Adding the unit to the MusicCast network
1
Tap the “MusicCast CONTROLLER” application icon on your mobile
device and tap “Setup”.
Hold down CONNECT for 5 seconds.
Search for the free application “MusicCast CONTROLLER” on the App Store or Google
Play
TM
and install it to your mobile device.
Installing MusicCast CONTROLLER
to your smartphone
2
Follow the onscreen instructions of the “MusicCast CONTROLLER”
application to set up the network.
Note
If you have already connected other MusicCast compatible devices to the network, tap “Settings” and then “Add New
Device”.
13
En
Note
Supported music streaming services vary by the
country or region of use.
Playback
Enjoying music with MusicCast CONTROLLER
Music stored on media servers
(PCs/NAS)
Internet radio
Music stored on a USB storage device
Online streaming services
Music on smartphone
14
En
EN
Playback from other playback devices
Playing back music stored on a Bluetooth device
Select Bluetooth as the input source, and then select the unit on the Bluetooth device.
Playing back music with AirPlay
Tap the AirPlay icon and select the network name of the unit as the audio output device.
Using an analog stereo pin cable
-------
Listening to external sources
Using a digital optical cable
15
En
Troubleshooting
Refer to the table below if the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not
help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
General
Problem Cause Remedy
The power does not turn on. The power cable is not properly
connected.
Connect the power cable firmly.
The protection circuitry has been activated. As a safety precaution, capability to turn on
the power is disabled. Contact your nearest
authorized Yamaha dealer or service center to
request repair.
The power turns off
immediately after the power
has been turned on.
The unit was turned on while a speaker
cable was shorted.
Twist the bare wires of each speaker cable firmly
and reconnect to the unit and speakers (p.9).
The inner power supply circuit is
malfunctioning.
Contact your nearest authorized Yamaha dealer
or service center to request repair.
The unit is not reacting. The internal microcomputer is frozen, due
to an external electric shock (such as
lightning or excessive static electricity).
Hold down the z (Power) key for at least 15
seconds to reboot the unit.
No sound. Incorrect input or output cable
connections.
Connect the cable properly.
Another input source is selected. Select an appropriate input source with the input
selection keys.
The volume is at the minimum or muted Turn up the volume.
The digital optical audio output on the
playback device is set to an audio format
other than PCM.
The unit supports only PCM on the optical
input. Change the audio output setting on the
playback device (such as a TV) to PCM.
Network
Problem Cause Remedy
Cannot configure connection
settings on MusicCast
CONTROLLER.
The mobile device is not connected to the
wireless router at your home.
Connect the mobile device to the wireless router
and start MusicCast CONTROLLER.
Disable the cellular data transmission of your
mobile device.
It takes time for the application to detect
the unit.
Wait a moment while making sure that your
mobile device does not go into sleep mode.
The wireless switch on the rear panel is
turned off.
Connect the unit to a router (access point) with a
network cable or set the wireless switch properly.
The unit’s power is set to Standby. Turn on the unit.
Access to the network is restricted by the firewall
settings of the wireless router (access point).
Check the firewall setting and the MAC address
filter of the wireless router (access point).
The network feature does not
function.
The network parameters (IP address) have
not been obtained properly.
Enable the DHCP server function on your router.
The unit is starting up. (The unit becomes
operative about 10 seconds after plugging
the power cable into the wall outlet.)
Use the network function after the unit has
completely started up.
Firmware update via the
network failed.
The network connection is unstable. Try updating again after a while.
The unit cannot connect to the
Internet via a wireless router
(access point).
The wireless router (access point) is turned
off.
Turn on the wireless router.
The unit and the wireless router (access
point) are too far apart or there is an
obstacle between them.
Place the unit and the wireless router (access
point) closer to each other or move them to a
location where there are no obstacles between
them.
16
En
EN
Advanced operation
The unit is equipped with many other functions such as tone adjustment. For more
information about operating the unit, refer to the Owners Manual (Advanced), which
can be downloaded from the Yamaha website:
1. Access the Yamaha website (http://download.yamaha.com/) with a web browser.
2. Select your country or region.
3. Type WXA-50 or WXC-50 (model name) in the blank of “Search by Model Name”.
4. Click “Search” button.
5. Download the Owner’s Manual displayed on “Search Results”.
Bluetooth
Problem Cause Remedy
Cannot make the unit pair with
a Bluetooth device.
The Bluetooth device does not support
A 2 D P.
Use a Bluetooth device that supports A2DP.
The unit and the Bluetooth device are too
far apart.
Move the Bluetooth device closer to the unit.
The unit enters Standby mode. Turn on the unit and select Bluetooth as the input
source, and then perform pairing with the device.
Another Bluetooth device is already
connected to the unit.
Terminate the current Bluetooth connection and
then establish a new connection.
Error table of STATUS indicator (front panel)
Color Condition Blink Status of the unit
Red Flashing, and the power
turns off immediately
after the power has
been turned on
2 - 8 times As a safety precaution, the unit turned itself off.
Flashing, and the power
does not turn on
4 - 8 times As a safety precaution, capability to turn on the
power is disabled. Contact your nearest authorized
Yamaha dealer or service center to request repair.
Flashing (every 0.5
second)
Repeat blinking 2 - 7
times and 1 second off
until the unit is turned off
An error occurred during firmware updating. For more
information about updating the firmware, refer to the
Owner’s Manual (Advanced) that can be downloaded
from the Yamaha website.
Slow flashing (every 1
second)
Twice An error is occurring with the USB device.
3 times An error is occurring with the network.
5 times An error is occurring with WAC/WPS/CONNECT.
Repeated until the unit is
turned off
Firmware update failed. Update the firmware again.
For more information about updating the firmware,
refer to the Owner’s Manual (Advanced) that can be
downloaded from the Yamaha website.
Orange Flashing Twice The remote control IDs of the unit and the remote
control are not identical, or reception of the remote
control signal is disabled. For more information
about setting the remote control, refer to the Owner’s
Manual (Advanced) that can be downloaded from the
Yamaha website.
White Slow flashing after
turning on the power
10 times A new firmware update is available. For more
information about updating the firmware, refer to the
Owner’s Manual (Advanced) that can be downloaded
from the Yamaha website.
1
Fr
PRÉCAUTIONS CONCERNANT LA SÉCURITÉ
10 Protéger le cordon d’alimentation de sorte qu’il
ne risque pas d’être piétiné ou coincé, surtout
au niveau des ches, des prises et de sa sortie de
l’appareil.
11 Utiliser seulement les xations et accessoires
spéciés par le fabricant.
12 Utiliser seulement le chariot,
socle, trépied, support
ou meuble spécié par le
fabricant ou vendu avec
l’appareil. Si un chariot est
utilisé, faire attention de ne
pas se blesser ou de le renverser pendant le
transport de l’appareil.
13 Débrancher cet appareil pendant les orages
électriques, ou s’il ne doit pas être utilisé
pendant un certain temps.
14 Pour toute inspection s’adresser à un personnel
qualié. Une inspection est nécessaire en
cas de dommage, quel qu’il soit, par exemple
cordon d’alimentation ou che endommagé,
liquide répandu ou objet tombé à l’intérieur de
l’appareil, exposition de l’appareil à la pluie ou à
l’humidité, fonctionnement anormal ou chute de
l’appareil.
• Explication des symboles
Léclair avec une èche à
l’intérieur d’un triangle équilatéral
est destiné à attirer l’attention
de l’utilisateur sur la présence
d’une « tension dangereuse » non
isolée à l’intérieur du produit,
pouvant être sufsamment
élevée pour constituer un risque
d’électrocution.
Le point d’exclamation à
l’intérieur d’un triangle
équilatéral est destiné à attirer
l’attention de l’utilisateur sur
la présence d’instructions
importantes sur l’emploi ou de
la maintenance (paration) de
l’appareil dans la documentation
fournie.
1 Lire ces instructions.
2 Conserver ces instructions.
3 Tenir compte de tous les avertissements.
4 Suivre toutes les instructions.
5 Ne pas utiliser cet appareil à proximité de leau.
6 Nettoyer cet appareil avec un chiffon sec
seulement.
7 Ne pas recouvrir les ailettes de ventilation.
Installer l’appareil selon les instructions du
fabricant.
8 Ne pas installer près d’une source de chaleur,
comme un appareil de chauffage, une résistance
électrique, un poêle, ou tout autre appareil
(amplicateurs compris) produisant de la chaleur.
9 Ne pas désamorcer le système de sécurité d’une
che polarisée ou d’une che avec mise à la
terre. Une che polarisée est munie de deux
lames, dont l’une est plus large que lautre. Une
che avec mise à la terre est munie de deux
lames et d’une broche de terre. La lame la plus
large ou la troisième broche sont reliées à la
terre pour des raisons de sécurité. Si la che
fournie ne s’inre pas dans la prise, s’adresser
à un électricien pour faire remplacer la prise
obsolète.
La télécommande fournie avec ce produit
contient une pile de type bouton/en forme de
pièce de monnaie. Lingestion de la pile de
type bouton/en forme de pièce de monnaie
peut causer en seulement 2 heures des brûlures
internes ts graves risquant de provoquer la
mort.
Gardez les piles neuves et usées hors de la
portée des enfants. Si le compartiment de pile
ne se ferme pas correctement, cessez d’utiliser
le produit et gardez-le hors de la pore des
enfants.
Si vous pensez que des piles ont pu être avalées
ou placées dans une partie du corps quelconque,
demandez des soins médicaux sans tarder.
ATTENTION
RISQUE DE CHOC ÉLECTRIQUE:
NE PAS OUVRIR
ATTENTION : POUR RÉDUIRE LES RISQUES D’INCENDIE ET DE
DÉCHARGE ELECTRIQUE, NE PAS RETIRER LE COUVERCLE
(OU LE PANNEAU ARRIÈRE). AUCUNE PIÈCE INTERNE NE PEUT
ÊTRE CHANGÉE PAR L’UTILISATEUR. POUR L’ENTRETIEN,
S’ADRESSER À UN PERSONNEL QUALIFIÉ.
AVERTISSEMENT
NE PAS INGÉRER LA PILE – RISQUE DE
BRÛLURE CHIMIQUE
ATTENTION
Remplacez uniquement avec une batterie de même type ou
équivalent. Risque d’explosion si la batterie est mal remplacée.
2
Fr
FR
FR
Nous vous souhaitons un plaisir
musical durable
Yamaha et le Groupe des
Entreprises Électroniques Grand
Public de l’Association des
Industries Électroniques vous
demandent de tirer le meilleur
parti de votre équipement tout en écoutant à un
niveau non dommageable pour louïe, c’est-à-dire
un niveau où vous pouvez obtenir un son fort
et clair, sans hurlement ni distorsion, mais sans
aucun danger pour l’ouïe.
Comme les sons trop forts causent des lésions
auditives qui ne peuvent être détectées qu’à long
terme, lorsquil est trop tard, Yamaha et le Groupe
des Entreprises Électroniques Grand Public de
l’Association des Industries Électroniques vous
conseillent lécoute prolongée à des volumes
excessifs.
Informations de la FCC
(Pour les clients résidents aux États-Unis)
1 AVIS IMPORTANT: NE PAS
APPORTER DE MOFIDICATIONS À
CET APPAREIL !
Ce produit est conforme aux exigences de
la FCC s’il est installé selon les instructions
du mode d’emploi. Toute modication non
approuvée expressément par Yamaha peut
invalider l’autorisation, accore par la FCC,
d’utiliser ce produit.
2 IMPORTANT: N’utiliser que des
câbles blindés de haute qualité pour le
raccordement de ce produit à des accessoires
et/ou à un autre produit. Seuls le ou les
câbles fournis avec le produit DOIVENT
être utilisés. Suivre les instructions
concernant l’installation. Le non respect des
instructions peut invalider l’autorisation,
accordée par la FCC, d’utiliser ce produit
aux États-Unis.
3 REMARQUE:Ce produit a été testé et
claré conforme aux normes relatives
aux appareils nuriques de Classe « B
», telles que xées dans l’Article 15 de la
Réglementation FCC. Ces normes sont
destinées à assurer une protection sufsante
contre les interrences nuisibles avec
d’autres appareils électroniques dans une
installation résidentielle.
Cet équipement génère et utilise des
fquences radio qui, en cas d’installation et
d’utilisation non conformes aux instructions
du mode d’emploi, peuvent être à l’origine
d’interrences emchant d’autres appareils
de fonctionner.
POUR LES CONSOMMATEURS CANADIENS
Pour éviter les chocs électriques, introduire
la lame la plus large de la che dans la borne
correspondante de la prise et pousser jusqu’au fond.
CAN ICES-3(B)/NMB-3(B)
IMPORTANT
Veuillez enregistrer le nuro de série de cet
appareil dans l’espace réservé à cet effet, ci-
dessous.
MODÈLE:
No. de série:
Le nuro de série se trouve au bas de
l’appareil. Prre de conserver le mode d’emploi
en lieu sûr pour toute référence future.
Cependant, la conformité à la Réglementation
FCC ne garantit pas l’absence d’interrences
dans une installation particulière. Si ce produit
devait produire des interférences, ce qui peut
être déterminé en « ÉTEIGNANT » et en «
RALLUMANT » le produit, l’utilisateur est
invité à essayer de corriger le problème d’une
des manières suivantes :
Réorienter ce produit ou le dispositif affecté par
les interférences.
Utiliser des prises d’alimentation branchées sur
différents circuits (avec interrupteur de circuit
ou fusible) ou installer un ou des ltres pour
ligne secteur.
Dans le cas d’interférences radio ou TV,
changer de place l’antenne et la réorienter. Si
l’antenne est un conducteur plat de 300 ohms,
remplacer ce câble par un câble de type coaxial.
Si ces mesures ne donnent pas les résultats
escomps, prre de contacter le détaillant local
autorisé à commercialiser ce type de produit.
Si ce n’est pas possible, prre de contacter
Yamaha Corporation of America A/V Division,
6600 Orangethorpe Avenue, Buena Park, CA
90620, USA.
Les déclarations prédentes NE concernent
QUE les produits commercialisés par Yamaha
Corporation of America ou ses liales.
3
Fr
DECLARATION D’INFORMATIONS DE CONFORMITE
(DECLARATION DE PROCEDURE DE CONFORMITE)
Entité responsable:
Yamaha Corporation of America A/V Division
Adresse:
6600 Orangethorpe Avenue, Buena Park, CA
90620, USA
Téléphone:
714-522-9011
Type de féquipement:
Amplicateur Streaming Sans Fil,
Préamplicateur Streaming Sans Fil
Nom de modèle:
WXA-50, WXC-50
Le présent appareil est conforme aux la partie 15
des règles de la FCC et CNR de fIndustrie Canada
applicables aux appareils radio exempts de licence.
L’fexploitation est autorisée aux deux conditions
suivantes:
(1) lfappareil ne doit pas produire de brouillage, et
(2) lfutilisateur de l’fappareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’fen compromettre le
fonctionnement.
PRÉCAUTION FCC
Cet appareil a été testé et il s’fest avéré être
conforme aux limites détermies pour un
appareil numérique de Classe B, conformément
à la partie 15 du Règlement FCC. Ces
limites sont desties à offrir une protection
raisonnable contre les interférences nuisibles
pouvant survenir en cas d’futilisation de ce
produit dans un environnement domestique.
Cet appareil produit, utilise et peut émettre
de l’fénergie radioélectrique et, s’l nfest
pas installé conformément aux instructions,
peut provoquer des interrences radio.
Il n’fest toutefois pas garanti qu’faucune
interférence ne se produira dans le cas d’fune
installation done. Si l’fappareil provoque
des interrences nuisibles à la réception de
programmes radio ou de télévision, ce qui peut
être déterminé en éteignant, puis en allumant
l’fappareil, l’futilisateur est prié de tenter
de corriger le problème en prenant l’fune ou
plusieurs des mesures suivantes :
REMARQUE
Tout changement ou toute modication non
approuvé expressément par le tiers responsable
peut aboutir à l’nterdiction de faire fonctionner
cet appareil.
N’utilisez pas cet appareil à moins de 22 cm des
personnes disposant d’un stimulateur cardiaque ou
d’un débrillateur.
- Réorienter ou déplacer l’fantenne réceptrice.
- Éloigner davantage l’fappareil du récepteur.
- Raccorder l’fappareil à une prise d’fun circuit
différent de celui du récepteur.
- Consulter le revendeur ou un technicien
radio/télé expérimenté.
Cet équipement est conforme aux limites
d’fexposition aux rayonnements énones pour
un environnement non contrôlé et respecte
les règles les radioélectriques (RF) de la
FCC lignes directrices d’exposition dans le
Supplément C à OET65 et d’fexposition aux
fquences radioélectriques (RF) CNR-102 de
l’fIC. Cet équipement doit être installé et utilisé
en gardant une distance de 20 cm ou plus entre
le dispositif rayonnant et le corps (à lfexception
des extmités : mains, poignets, pieds et
chevilles).
Ce émetteur ne peut pas être placé à proximité
de ou utilisé conjointement avec tout autre
émetteur ou antenne.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Yamaha Audio WXA-50 Manuale utente

Tipo
Manuale utente
Questo manuale è adatto anche per