Finlux 32-FHB-4210 Manuale utente

Marca: Finlux

Modello: 32-FHB-4210

Categoria: TV LCD

Tipo: Manuale utente

English - 1 -

Contents

Safety Information ..................................................2

Markings on the Product.........................................2

Environmental Information......................................3

Features

.................................................................4

Accessories Included..............................................4

Standby Notications

.............................................. 4

TV Control Buttons & Operation

............................. 4

Inserting the Batteries into the Remote

..................5

Connect Power

...................................................... 5

Antenna Connection

............................................... 5

Notication

.............................................................. 5

Specication

...........................................................6

Remote Control

......................................................7

Connections............................................................8

Switching On/Off

.....................................................9

First Time Installation..............................................9

Media Playback via USB Input

...............................9

Media Browser Menu............................................10

CEC and CEC RC Passthrough

........................... 10

TV Menu Contents................................................ 11

General TV Operation

..........................................15

Using the Channel List

.........................................15

Conguring Parental Settings

...............................15

Electronic Programme Guide (EPG)

....................15

Teletext Services

..................................................16

Software Upgrade.................................................16

Troubleshooting & Tips

......................................... 16

PC Input Typical Display Modes

........................... 17

AV and HDMI Signal Compatibility

.......................17

Supported Video File Formats for USB Mode

......18

Supported Picture File Formats for USB Mode

....18

Supported Audio File Formats for USB Mode

......19

Supported Subtitle File Formats for USB Mode

...20

Supported DVI Resolutions

..................................21

Important Instructions

........................................... 22

English - 2 -

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note: Follow the on screen instructions for operating the

related features.

In extreme weather (storms, lightning) and long inactivity

periods (going on holiday) disconnect the TV set from the

mains.

The mains plug is used to disconnect TV set from the mains

and therefore it must remain readily operable. If the TV set is

not disconnected electrically from the mains, the device will

still draw power for all situations even if the TV is in standby

mode or switched off.

IMPORTANT - Please read these

instructions fully before installing or

operating

WARNING: Never let people (including

children) with reduced physical, sensory or

mental capabilities or lack of experience and / or

knowledge use electrical devices unsupervised.

• Use this TV set at an altitude of less than 2000

meters above the sea level, in dry locations and in

regions with moderate or tropical climates.

• The TV set is intended for household and similar

general use but may also be used in public places.

• For ventilation purposes, leave at least 5cm of free

space around the TV.

• The ventilation should not be impeded by covering

or blocking the ventilation openings with items, such

as newspapers, table-cloths, curtains, etc.

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord.

A damaged power cord/plug can cause re or give

you an electric shock. Handle the power cord by the

plug, do not unplug the TV by pulling the power cord.

Never touch the power cord/plug with wet hands

as this could cause a short circuit or electric shock.

Never make a knot in the power cord or tie it with

other cords. When damaged it must be replaced,

this should only be done by qualied personnel.

• Do not expose the TV to dripping or splashing of

liquids and do not place objects lled with liquids,

such as vases, cups, etc. on or over the TV (e.g.,

on shelves above the unit).

• Do not expose the TV to direct sunlight or do not

place open ames such as lit candles on the top of

or near the TV.

• Do not place any heat sources such as electric

heaters, radiators, etc. near the TV set.

• Do not place the TV on the floor and inclined

surfaces.

• To avoid danger of suffocation, keep plastic bags

out of the reach of the babies, children and domestic

animals.

• Carefully attach the stand to the TV. If the stand is

provided with screws, tighten the screws rmly to

prevent the TV from tilting. Do not over-tighten the

screws and mount the stand rubbers properly.

• Do not dispose of the batteries in fire or with

hazardous or ammable materials.

Warning: Batteries must not be exposed to excessive

heat such as sunshine, re or the like.

Caution

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Maintenance

Important maintenance

component

Markings on the Product

The following symbols are used on the product as

a marker for restrictions and precautions and safety

instructions. Each explanation shall be considered

where the product bears related marking only. Note

such information for security reasons.

Class II Equipment: This appliance is

designed in such a way that it does not require

a safety connection to electrical earth.

Class II Equipment With Functional

Earthing: This appliance is designed in such

a way that it does not require a safety

connection to electrical earth, the earth connection is

used for functional purposes.

Protective Earth Connection: The marked

terminal is intended for connection of the

protective earthing conductor associated with

the supply wiring.

Hazardous Live Terminal: The marked

terminal(s) is/are hazardous live under normal

operating conditions.

Caution, See Operating Instructions: The

marked area(s) contain(s) user replaceable

coin or button cell batteries.

Class 1 Laser Product:

This product contains Class

1 laser source that is safe

under reasonably foreseeable

conditions of operation.

CLASS 1

LASER PRODUCT

English - 3 -

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product or the accessories supplied with the

product may contain a coin/button cell battery. If the

coin/button cell battery is swallowed, it can cause

severe internal burns in just 2 hours and can lead

to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely,

stop using the product and keep it away from

children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

WARNING

Never place a television set in unstable or inclined

locations. A television set may fall, causing serious

personal injury or death. Many injuries, particularly

to children, can be avoided by taking simple

precautions such as;

• Using cabinets or stands recommended by the

manufacturer of the television set.

•

Only using furniture that can safely support the

television set.

•

Ensuring the television set is not overhanging the

edge of the supporting furniture.

• Not placing the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television set

to a suitable support.

• Not standing the television set on cloth or other

materials placed between the television and

supporting furniture.

• Educating children about the dangers of climbing

on furniture to reach the television set or its

controls. If your existing television set is being

retained and relocated, the same considerations

as above should be applied.

WALL MOUNTING WARNINGS

• Read the instructions before mounting your TV

on the wall.

•

The

wall mount kit is optional. You can obtain from

your local dealer, if not supplied with your TV.

• Do not install the TV on a ceiling or on an inclined

wall.

• Use the specied wall mounting screws and other

accessories.

• Tighten the wall mounting screws rmly to prevent

the TV from fall. Do not over-tighten the screws.

WARNING

Apparatus connected to the protective earthing

of the building installation through the MAINS

connection or through other apparatus with a

connection to protective earthing – and to a

television distribution system using coaxial cable,

may in some circumstances create a re hazard.

Connection to a television distribution system has

therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11)

Environmental Information

This television is designed to be environment friendly.

To reduce energy consumption, you can follow these

steps:

If you set the Energy Saving to Minimum, Medium,

Maximum or Auto the TV will reduce the energy

consumption accordingly. If you like to set the

Backlight to a xed value set as Custom and adjust

the Backlight (located under the Energy Saving

setting) manually using Left or Right buttons on the

remote. Set as Off to turn this setting off.

Note: Available Energy Saving options may differ depending

on the selected Mode in the System>Picture menu.

The Energy Saving settings can be found in the

System>Picture menu. Note that some picture

settings will be unavailable to be changed.

If pressed Right button while Auto option is selected or

Left button while Custom option is selected, “Screen

will be off in 15 seconds.” message will be displayed

on the screen. Select Proceed and press OK to turn

the screen off immediately. If you don’t press any

button, the screen will be off in 15 seconds. Press

any button on the remote or on the TV to turn the

screen on again.

Note: Screen Off option is not available if the Mode is set

to Game.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

English - 4 -

Features

• Remote controlled colour TV

• Fully integrated digital terrestrial TV (DVB-T-T2)

• HDMI inputs to connect other devices with HDMI

sockets

• USB input

• OSD menu system

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to eight hours.

• Sleep timer

• Child lock

• Automatic sound mute when no transmission.

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

• Ethernet (LAN) for interactive services available on

digital channels

• Picture off function

Accessories Included

• Remote Control

• Batteries: 2 x AAA

• Instruction Book

• Quick Start Guide

Standby Notications

If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 5 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “TV switched to stand-by

mode automatically because there was no signal

for a long time.” Press OK to continue.

If the TV is on and it isn’t being operated for a while

it will go into standby. When you next switch-on, the

following message will be displayed. “TV switched to

stand-by mode automatically because no operation

was made for a long time.” Press OK to continue.

TV Control Buttons & Operation

P/CH

TV/AV

1. Standby/On button

2. Source button

3. Programme +/- buttons

4. Volume +/- buttons

Press the Volume +/- buttons simultaneously to

view main menu and use Programme +/- buttons to

navigate and Volume +/- buttons to change value.

Note:

The position of the control buttons may differ

depending on the model.

Operation with the Remote Control

Press the Menu button on your remote control to

display main menu screen. Use the directional buttons

to select a menu tab and press OK to enter. Use the

directional buttons again to select or set an item. Press

Return/Back or Menu button to quit a menu screen.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press the

Source button on your remote control consecutively

to select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume

by using the Volume +/- and Programme +/- buttons

on the remote.

English - 5 -

Inserting the Batteries into the Remote

Remove the screw that secure the battery compartment

cover on the back side of the remote control rst.

Press and slide the cover to open. Insert two AAA

batteries. Make sure the (+) and (-) signs match

(observe correct polarity). Place the cover back on.

Then screw the cover back on again.

Connect Power

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz socket. After unpacking, allow

the TV set to reach the ambient room temperature

before you connect the set to the mains. Plug the

power cable to the mains socket outlet.

Antenna Connection

Connect the aerial plug to the AERIAL INPUT (ANT)

socket located on the back of the TV.

Notication

TRADEMARK ACKNOWLEDGMENT

The terms HDMI and High-Definition Multimedia

Interface, and the HDMI Logo are trademarks

or registered trademarks of HDMI Licensing

Administrator, Inc. in the United States and other

countries.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing

Limited. DTS, the Symbol, & DTS and the Symbol

together are registered trademarks, and DTS

TruSurround is a trademark of DTS, Inc.

DTS, Inc.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing

Limited. DTS, the Symbol, & DTS and the Symbol

together are registered trademarks, and DTS

2.0+Digital Out is a trademark of DTS, Inc.

DTS, Inc.

English - 6 -

Information for Users on Disposal of Old

Equipment and Batteries

[European Union only]

Equipment bearing these symbols should not be

disposed as general household waste.

You should look for appropriate recycling facilities and

systems for the disposal of these products.

Notice: The sign Pb below the symbol for batteries indicates

that this battery contains lead.

Products

Battery

Specication

TV Broadcasting

PAL BG/DK/II’

SECAM BG/DK

Receiving Channels

VHF (BAND I/III) - UHF

(BAND U) - HYPERBAND

Digital Reception

Fully integrated digital

terrestrial-cable TV

(DVB-T-C)

(DVB-T2 compliant)

Number of Preset

Channels

1.000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio DTS TruSurround

Audio Output Power

(WRMS.) (10% THD)

2 x 6

Power Consumption (W) 65

Weight (Kg) 7,00

TV Dimensions DxLxH

(with foot) (mm)

185 x 728 x 486

TV Dimensions DxLxH

(without foot) (mm)

34/63 x 728 x 428

Display 32”

Operation temperature

and operation humidity

0ºC up to 40ºC, 85%

humidity max

English - 7 -

Remote Control

Q. MENU

BACK EXIT

LANG. SUBT.

EPG

TXT

.,/@

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

1. Standby: Switches On / Off the TV

2. Numeric buttons: Switches the channel, enters a

number or a letter in the text box on the screen.

3. TV: Displays channel list / Switches to TV Source

4. No function

5. Volume +/-

6. Menu: Displays TV menu

7. Directional buttons: Helps navigate menus, content

etc. and displays the subpages in TXT mode when

pressed Right or Left

8. OK: Conrms user selections, holds the page (in TXT

mode), views channel list (DTV mode)

9. Back/Return: Returns to previous screen, opens

index page (in TXT mode)

10. Media browser: Opens the media browsing screen

11. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

12. My button 1 (*)

13. Language: Switches among sound modes (analogue

TV), displays and changes audio/subtitle language

(digital TV, where available)

14. Rapid reverse: Moves frames backwards in media

such as movies

15. Pause: Pauses the media being played

16. No function

17. Coloured Buttons: Follow the on-screen instructions

for coloured button functions

18. Play: Starts to play selected media

19. Stop: Stops the media being played

20. Rapid advance: Moves frames forward in media such

as movies

21. Subtitles: Turns subtitles on and off (where available)

22. Screen: Changes the aspect ratio of the screen

23. Text: Displays teletext (where available), press again

to superimpose the teletext over a normal broadcast

picture (mix)

24. My button 2 (*)

25. EPG (Electronic programme guide): Displays the

electronic programme guide

26. Exit: Closes and exits from displayed menus or

returns to previous screen

27. Quick Menu: Displays a list of menus for quick access

28. Mute: Completely turns off the volume of the TV

29. Programme +/-

30. Swap: Quickly cycles between previous and current

channels or sources

31. Source: Shows all available broadcast and content

sources

(*) MY BUTTON 1 & MY BUTTON 2:

These buttons may have default functions depending on

the model. However you can set a special function to these

buttons by pressing on them for ve seconds when on a

desired source or channel. A conrmation message will be

displayed on the screen. Now the selected MY BUTTON is

associated with the selected function.

Note that if you perform First Time Installation, MY BUTTON

1&2 will return to their default function.

English - 8 -

Connections

Connector Type Cables Device

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

PC/YPbPr

Audio

Connection

(side)

YPbPr/PC Audio Cable (not

supplied)

HDMI

Connection

(back)

SPDIF

(Coaxial Out)

Connection

(back)

SIDE AV

Side AV

(Audio/Video)

Connection

(side)

AV Cable (not supplied)

HEADPHONE

Headphone

Connection

(side)

YPBPR

YPbPr Video

Connection

(back)

PC to YPbPr Connection Cable

(not supplied)

USB

Connection

(side)

Connection

(side)

CAM

module

LAN

Ethernet

Connection

(back)

LAN / Ethernet Cable

NOTE: When connecting

a device via the YPbPr or Side

AV input, you must use the

connection cables to enable

connection. See the illustrations

on the left side. | You can use

YPbPr to VGA cable (not supplied)

to enable YPbPr signal via VGA

input. | You cannot use VGA

and YPbPr at the same time.

| To enable PC/YPbPr audio,

you will need to use the side

audio inputs with a YPbPr/

PC audio cable (not supplied)

for audio connection. | If an

external device is connected via

the SCART socket, the TV will

automatically switch to AV mode.|

When receiving DTV channels

(Mpeg4 H.264) or while in Media

Browser mode, output will not be

available via the scart socket. |

When using the wall mounting

kit (available from third party

in the market, if not supplied),

we recommend that you plug all

your cables into the back of the

TV before mounting on the wall.

| Insert or remove the CI module

only when the TV is SWITCHED

OFF. You should refer to the

module instruction manual for

details of the settings. The USB

input of your TV supports devices

up to 500mA. Connecting devices

that have current value above

500mA may damage your TV. |

By connecting an HDMI cable to

your TV, you have to use only a

shielded HDMI cable to guarantee

a sufficient immunity against

parasitic frequency radiation.

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making

any connection. After the connection is done, you can turn on the units and use them.

English - 9 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

• Press the “ ” button, Programme +/- or a numeric

button on the remote control.

• Press the “ ” button or Programme +/- on the TV.

The TV will then switch on.

To Switch the TV Off

Press the “ ” button on the remote control or press

the “

” button on the TV, then the TV switches into

standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the

standby LED can blink to indicate that features such as

Standby Search, Over Air Download or Timer is active. The

LED can also blink when you switch on the TV from standby

mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using the

directional buttons.

Note: Depending on the Country selection you may be asked

to set and conrm a PIN at this point. The selected PIN cannot

be 0000. You have to enter it if you are asked to enter a PIN

for any menu operation later.

About Selecting Broadcast Type

Digital Aerial: If Aerial broadcast search option is

turned on, the TV will search for digital terrestrial

broadcasts after other initial settings are completed.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

Additionally you can set a broadcast type as your

favourite one. Priority will be given to the selected

broadcast type during the search process and the

channels of it will be listed on the top of the Channel

List. When nished, press OK to continue.

You can activate Store Mode option at this point.

This option will congure your TV’s settings for store

environment and depending on the TV model being

used, the supported features of it may be displayed

on the top of the screen as an info banner. This option

is intended only for store use. It is recommended to

select Home Mode for home use. This option will be

available in System>Options>More menu and can

be turned off/on later.

Press OK button on the remote control to continue.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

After all the available stations are stored, scan results

will be displayed. Press OK to continue. The Edit

Channel List menu will be displayed next. You can

edit the channel list according to your preferences or

press the Menu button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time

installation. Note that, some options may not be available

depending on the country selection.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT! Back up the les on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting.

Wait a little while before each plugging and unplugging

as the player may still be reading les. Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a le.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image les the Media Browser menu

can only display 1000 image les stored on the connected

USB device.

English - 10 -

Media Browser Menu

You can play photo, music and movie les stored on a

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. Pressing the Menu button while in the Media

Browser mode will access the Picture, Sound and

Settings menu options. Pressing the Menu button

again will exit from this screen.

You can set your Media

Browser preferences by using the Settings menu.

Loop/Shufe Mode Operation

Start playback with the Play

button and activate

All les in the list will be

continuously played in original

order

Start playback with the OK

button and activate

The same le will be played

continuously (repeat)

Start playback with the Play

button and activate

All les in the list will be

played once in random order

Start playback with the Play

button and activate

All les in the list will be

continuously played in the

same random order.

Custom Boot Up Logo

You can personalize your TV and see your favorite

image or photo on the screen each time your TV boots

up. To do this, copy your favorite image les into a USB

disk and open them from the Media Browser menu.

When you have chosen the desired image, highlight it

and press OK to view it in full screen. Press OK again

to choose the image as custom logo. A conrmation

message will be displayed. Select Yes and press OK

again. If the image is suitable(*) you will see it on the

screen during the TV’s next boot up.

Note: If you perform a First Time Installation the TV will return

to using the default logo, if any.

(*) Images should have an aspect ratio of 16:9 and they should

be in .jpg, .jpeg or .jpe le formats. Only les with sizes no

greater then 300KB are supported. The image cannot be

set as boot logo, which’s resolution doesn’t appear on the

info banner.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the System>Settings>More menu

should be set as Enabled at rst. Press the Source

button and select the HDMI input of the connected

CEC device from the Sources List menu. When

new CEC source device is connected, it will be listed

in source menu with its own name instead of the

connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected.

To terminate this operation and control the TV via

the remote again, press Quick Menu button on the

remote, highlight the CEC RC Passthrough and

set as Off by pressing Left or Right button. This

feature can also be enabled or disabled under the

System>Settings>More menu.

The TV supports also ARC(Audio Return Channel)

feature. This feature is an audio link meant to replace

other cables between the TV and the audio system

(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio

outputs automatically. So you need to decrease TV

volume to zero manually, if you want to hear audio

from connected audio device only (same as other

optical or co-axial digital audio outputs). If you want

to change connected device’s volume level, you

should select that device from the source list. In that

case volume control keys are directed to connected

audio device.

Note: ARC is supported only via the HDMI1 input.

System Audio Control

Allows an Audio Amplier/Receiver to be used with

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the System>Settings>More

menu as Amplier. The TV speakers will be muted

and the sound of the watched source will be provided

from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

English - 11 -

TV Menu Contents

System - Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode

can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colours.

Energy Saving

For setting the Energy Saving to Custom, Off, Minimum, Medium, Maximum, Auto,

Screen off.

Note: Available options may differ depending on the selected Mode.

Backlight

This setting controls the backlight level. The backlight function will be inactive if the

Energy Saving is set to an option other then Custom.

Advanced Settings

Dynamic Contrast

You can change the dynamic contrast ratio to desired value.

Noise Reduction

If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce

the amount of noise.

Colour Temp

Sets the desired colour temperature value. Cool, Normal, Warm and Custom options are

available.

White Point

If the Colour Temp option is set as Custom, this setting will be available. Increase the

‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

Picture Zoom

Sets the desired image size format.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching lms to see the fast motion scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

HDMI Full Range

While watching from a HDMI source, this feature will be visible. You can use this feature to

enhance blackness in the picture.

PC Position

Appears only when the input source is set to VGA/PC.

Autoposition

Automatically optimizes the display. Press OK to optimize.

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy picture on the

screen. You can use phase to get a clearer picture by trial and error.

Reset

Resets the picture settings to factory default settings (except Game mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture

Settings while in PC mode.

English - 12 -

System - Sound Menu Contents

Volume

Adjusts the volume level.

Equalizer

Selects the equalizer mode. Custom settings can be made only when in User mode.

Balance

Adjusts whether the sound comes from the left or right speaker.

Headphone

Sets headphone volume.

Please ensure before using headphones that the headphone volume is set to a low

level, to prevent damage to your hearing.

Sound Mode

You can select a sound mode (If the viewed channel supports).

AVL (Automatic

Volume Limiting)

Sets the sound to obtain xed output level between programmes.

Headphone/Lineout

When you connect an external amplier to your TV using the headphone jack, you

can select this option as Lineout. If you have connected headphones to the TV, set

this option as Headphone.

Please ensure before using headphones that this menu item is set to Headphone.

If it is set to Lineout, the output from the headphone socket will be set to maximum

which could damage your hearing.

Dynamic Bass

Enables or disables the Dynamic Bass.

DTS TruSurround

Enables or disables the DTS TruSurround.

Digital Out

Sets digital out audio type.

English - 13 -

System - Settings Menu Contents

Conditional Access

Controls conditional access modules when available.

Language

You may set a different language depending on the broadcaster and the country.

Parental

Enter correct password to change parental settings. You can easily adjust Menu

Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a

new PIN or change the Default CICAM PIN using the related options.

Note: Some menu options may not be available depending on the country selection in the First Time

Installation. Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on

the country selection) during the First Time Installation use the PIN that you have dened

Timers

Sets sleep timer to turn off the TV after a certain time. Sets timers for selected

programmes.

Date/Time

Sets date and time.

Sources

Enables or disables selected source options.

Network/Internet

Settings

Displays network/internet settings.

Accessibility

Displays accessibility options of the TV.

Hard of Hearing

Enables any special feature sent from the broadcaster.

Audio

Description

A narration track will be played for the blind or visually impaired audience. Press OK

to see all available Audio Description menu options. This feature is available only if

the broadcaster supports it.

Displays other setting options of the TV.

Menu Timeout

Changes timeout duration for menu screens.

Software

Upgrade

Ensures that your TV has the latest rmware. Press OK to see the menu options.

Application

Version

Displays current software version.

Subtitle Mode

This option is used to select which subtitle mode will be on the screen (DVB subtitle /

Teletext subtitle) if both is available. Default value is DVB subtitle. This feature is available

only for the country option of Norway.

Auto TV OFF

Sets the desired time for the TV to automatically go into standby mode when not

being operated.

Store Mode

Select this mode for store display purposes. Whilst Store Mode is enabled, some

items in the TV menu may not be available.

Power Up Mode

This setting congures the power up mode preference. Last State and Standby

options are available.

CEC

With this setting you can enable and disable CEC functionality completely. Press Left

or Right button to enable or disable the feature.

CEC Auto Power

This function allows the connected HDMI-CEC compatible device to turn on the TV

and switch to its input source automatically. Press Left or Right button to enable or

disable the feature.

Speakers

To hear the TV audio from the connected compatible audio device set as Amplier.

You can use the remote control of the TV to control the volume of the audio device.

OSS

Displays Open Source Software license information.

English - 14 -

Installation Menu Contents

Automatic

channel scan

(Retune)

Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations.

Manual

channel scan

This feature can be used for direct broadcast entry.

Network

channel scan

Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial

network channels.

First time

installation

Deletes all stored channels and settings, resets TV to factory settings.

English - 15 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set

active stations to be listed by using the Channel List

options. Press the OK/TV button to open the Channel

List. You can lter the listed channels by pressing the

Blue button or open the Edit Channel List menu by

pressing the Green button in order to make advanced

changes in the current list.

Managing the Favourite Lists

You can create four different lists of your favourite

channels. Enter the Channel List in the main menu

or press the Green button while the Channel List

is displayed on the screen in order to open the Edit

Channel List menu. Select the desired channel on

the list. You can make multiple choices by pressing

the Yellow button. Then press the OK button to open

the Channel Edit Options menu and select Add/

Remove Favourites option. Press the OK button

again. Set the desired list option to On. The selected

channel/s will be added to the list. In order to remove

a channel or channels from a favourite list follow the

same steps and set the desired list option to Off.

You can use the Filter function in the Edit Channel

List menu to lter the channels in the Channel list

permanently according to your preferences. Using this

Filter option, you can set one of your four favourite

lists to be displayed everytime the Channel list is

opened. The ltering function in the Channel list

menu will only lter the currently displayed Channel

list in order to nd a channel and tune in to it. This

changes will not remain the next time the Channel

list is opened.

Conguring Parental Settings

The Parental Settings menu options can be used to

prohibit users from viewing of certain programmes,

channels and using of menus. These settings are

located in the System>Settings>Parental menu.

To display parental lock menu options, a PIN number

should be entered. After coding the correct PIN

number, Parental Settings menu will be displayed.

Menu Lock: This setting enables or disables access

to all menus or installation menus of the TV.

Guidance: This setting enables or disables access

some of the MHEG applications. Disabled applications

can be released by entering the right PIN.

Set PIN: Denes a new PIN number.

Default CICAM PIN: This option will appear as greyed

out if no CI module is inserted into the CI slot of the

TV. You can change the default PIN of the CI CAM

using this option.

Note: Default PIN can be set to 0000 or 1234. If you have

defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have dened.

Some options may not be available depending on the country

selection in the First Time Installation.

Electronic Programme Guide (EPG)

Some channels send information about their

broadcast schedules. Press the EPG button to view

the Programme Guide menu.

There are 3 different types of schedule layouts

available, Timeline Schedule, List Schedule and

Now/Next Schedule. To switch between them follow

the instructions on the bottom of the screen.

Timeline Schedule

Zoom (Yellow button): Press the Yellow button to

see events in a wider time interval.

Filter (Blue button): Views ltering options.

Select Genre (Subtitles button): Displays Select

Genre menu. Using this feature, you can search the

programme guide database in accordance with the

genre. Info available in the programme guide will be

searched and results matching your criteria will be

highlighted.

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected events.

Next/Prev Day (Programme +/- buttons): Displays

the events of previous or next day.

Search (Text button): Displays Guide Search menu.

Now (Swap button): Displays current event of the

highlighted channel.

List Schedule(*)

(*) In this layout option, only the events of the highlighted

channel will be listed.

Prev. Time Slice (Red button): Displays the events

of previous time slice.

Next/Prev Day (Programme +/- buttons): Displays

the events of previous or next day.

Event Details (Info button): Displays detailed

information about selected events.

Filter (Text button): Views ltering options.

Next Time Slice (Green button): Displays the events

of next time slice.

Options (OK button): Displays event options.

Now/Next Schedule

Navigate (Directional buttons): Press the

Directional buttons to navigate through the channels

and events.

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected events.

Filter (Blue button): Views ltering options.

Event Options

Use the directional buttons to highlight an event and

press OK button to display Event Options menu. The

following options are available.

English - 16 -

Select Channel: Using this option, you can switch to

the selected channel.

Set Timer on Event / Delete Timer on Event: After

you have selected an event in the EPG menu, press the

OK button. Select Set Timer on Event option and press

the OK button. You can set a timer for future events.

To cancel an already set timer, highlight that event and

press the OK button. Then select Delete Timer on

Event option. The timer will be cancelled.

Notes: You cannot switch to any other channel or source while

there is an active timer on the current channel.

It is not possible to set timer for two or more individual events

at the same time interval.

Teletext Services

Press the Text button to enter. Press again to activate

mix mode, which allows you to see the teletext page

and the TV broadcast at the same time. Press once

more to exit. If available, sections in the teletext pages

will become colour-coded and can be selected by

pressing the coloured buttons. Follow the instructions

displayed on the screen.

Digital Teletext

Press the Text button to view digital teletext

information. Operate it with the coloured buttons,

cursor buttons and the OK button. The operation

method may differ depending on the contents of the

digital teletext. Follow the instructions displayed on

the digital teletext screen. When the Text button is

pressed again, the TV returns to television broadcast.

Software Upgrade

Your TV is capable of nding and updating the rmware

automatically via the broadcast signal.

Software upgrade search via user interface

On the main menu select System>Settings and then

More. Navigate to Software upgrade and press the

OK button. In Upgrade options menu select Scan

for upgrade and press OK button to check for a new

software upgrade.

If a new upgrade is found, it starts to download

the upgrade. After the download is completed

confirm the question asking about rebooting the

TV by pressing the OK to continue with the reboot

operation.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock if

Automatic scanning option in the Upgrade options

menu is set to Enabled and if the TV is connected

to an aerial signal. If a new software is found and

downloaded successfully, it will be installed at the

next power on.

Note: Do not unplug the power cord while led is blinking

during the reboot process. If the TV fails to come on after the

upgrade, unplug, wait for two minutes then plug it back in.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to

wall outlet. Check if batteries are exhausted. Press

the Power button on the TV.

Poor picture

• Check if you have selected the correct TV system.

• Low signal level can cause picture distortion. Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

• The picture quality may degrade when two devices

are connected to the TV at the same time. In such

a case, disconnect one of the devices.

No picture

• This means your TV is not receiving any transmission.

Make sure the correct source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Check if the TV is muted. Press the Mute button or

increase the volume to check.

• Sound may be coming from only one speaker. Check

the balance settings from Sound menu.

Remote control - no operation

• The batteries may be exhausted. Replace the

batteries.

Input sources - can not be selected

• If you cannot select an input source, it is possible

that no device is connected. If not;

• Check the AV cables and connections if you are

trying to switch to the input source dedicated to the

connected device.

English - 17 -

PC Input Typical Display Modes

The following table is an illustration of some of the

typical video display modes. Your TV may not support

all resolutions.

Index Resolution Frequency

1 640x350 85Hz

2 640x400 70Hz

3 640x480 60Hz

4 640x480 66Hz

5 640x480 72Hz

6 640x480 75Hz

7 640x480 85Hz

8 800x600 56Hz

9 800x600 60Hz

10 800x600 70Hz

11 800x600 72Hz

12 800x600 75Hz

13 800x600 85Hz

14 832x624 75Hz

15 1024x768 60Hz

16 1024x768 66Hz

17 1024x768 70Hz

18 1024x768 72Hz

19 1024x768 75Hz

20 1024x768 85Hz

21 1152x864 60Hz

22 1152x864 70Hz

23 1152x864 75Hz

24 1152x864 85Hz

25 1152x870 75Hz

26 1280x768 60Hz

27 1360x768 60Hz

28 1280x768 75Hz

29 1280x768 85Hz

30 1280x960 60Hz

31 1280x960 75Hz

32 1280x960 85Hz

33 1280x1024 60Hz

34 1280x1024 75Hz

35 1280x1024 85Hz

36 1400x1050 60Hz

37 1400x1050 75Hz

38 1400x1050 85Hz

39 1440x900 60Hz

40 1440x900 75Hz

41 1600x1200 60Hz

42 1680x1050 60Hz

43 1920x1080 60Hz

44 1920x1200

60Hz

AV and HDMI Signal Compatibility

Source Supported Signals Available

EXT

(SCART)

PAL O

SECAM O

NTSC4.43 O

NTSC3.58 O

RGB 50/60 O

Side AV

PAL O

SECAM O

NTSC4.43 O

NTSC3.58 O

YPbPr

480i, 480p 60Hz O

576i, 576p 50Hz O

720p 50Hz,60Hz O

1080i 50Hz,60Hz O

HDMI

480i, 480p 60Hz O

576i, 576p 50Hz O

720p 50Hz,60Hz O

1080i 50Hz,60Hz O

1080p

24Hz,

25Hz,

30Hz,

50Hz,

60Hz

(X: Not Available, O: Available)

In some cases a signal on the TV may not be displayed

properly. The problem may be an inconsistency with

standards from the source equipment (DVD, Set-top

box, etc. ). If you do experience such a problem please

contact your dealer and also the manufacturer of the

source equipment.

English - 18 -

Supported Video File Formats for USB Mode

Extension Video Codec SPEC (Resolution) & Bit Rate

.dat, vob MPEG1/2

1080P@30fps - 40 Mbps

.mpg, .mpeg

MPEG1/2,

MPEG4

.ts, .trp

MPEG1/2, H.264,

AVS, MVC

H.264: 1080Px2@30fps - 62.5 Mbps, 1080P@60fps - 62.5 Mbps MVC:

1080P@30fps - 62.5 Mbps Other: 1080P@30fps - 40Mbps

.mp4, .mov,

.3gpp, .3gp

MPEG1/2,

MPEG4, H.263,

H.264, Motion

JPEG

H.264: 1080Px2@30fps - 62.5 Mbps, 1080P@60fps - 62.5 Mbps Motion JPEG:

640x480@30fps - 10 Mbps Other: 1080P@30fps - 40 Mbps

.avi MPEG1/2,

MPEG4,

Sorenson H.263,

H.263, H.264,

WMV3, Motion

JPEG

.mkv MPEG1/2,

MPEG4, H.263,

H.264, WMV3,

Motion JPEG

.asf Sorenson H.263,

H.264, WMV3,

Motion JPEG

.v WMV3 1080P@30fps - 40 Mbps

.swf RV30/RV40 1080P@30fps - 40 Mbps

.wmv

H.264, WMV3,

VC1

H.264: 1080Px2@30fps - 62.5 Mbps, 1080P@60fps - 62.5 Mbps Other:

1080P@30fps - 40 Mbps

Supported Picture File Formats for USB Mode

Image Photo Resolution (width x height) Remark

JPEG

Base-line 15360x8640

The limitation of max resolution depends on DRAM

size

Progressive 1024x768

PNG

non-interlace 9600x6400

interlace 1200x800

BMP 9600x6400

La pagina sta caricando ...

Finlux 32-FHB-4210 Manuale utente

Marca: Finlux

Modello: 32-FHB-4210

Categoria: TV LCD

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Finlux 32-FHB-4210 User manual

Finlux 32-FHB-4210 Manuale utente

Finlux 32-FHB-4210 Manuale utente

in altre lingue

Documenti correlati

Altri documenti