Sony CDX-GT430U Manuale del proprietario

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

DE

GB

4-109-733-11 (1)

CDX-GT434U

CDX-GT430U

FR

IT

NL

To cancel the demonstration (DEMO) display, see page 4.

Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 4 nach.

Pour annuler la demonstration (DEMO), reportez-vous a la page 4.

Per annullare la dimostrazione (DEMO), vedere pagina 4.

Om de demonstratie (DEMO) te annuleren, zie pagina 4.

FM/MW/LW

Compact Disc Player

2

For installation and connections, see the

supplied installation/connections manual.

This label is located on the bottom of the

chassis.

Notice for customers: the following

information is only applicable to

equipment sold in countries applying

EU Directives

The manufacturer of this product is Sony

Corporation, 1-7-1 Konan, Minato-ku, Tokyo,

Japan. The Authorized Representative for EMC

and product safety is Sony Deutschland GmbH,

Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters

please refer to the addresses given in separate

service or guarantee documents.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Microsoft, Windows Media,

and the Windows logo are

trademarks or registered

trademarks of Microsoft

Corporation in the United States and/or other

countries.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and Thomson.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use or

distribution of such technology outside of this

product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary.

Warning if your car’s ignition has no

ACC position

Be sure to set the Auto Off function (page 14).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain.

If you do not set the Auto Off function, press

and hold (OFF) until the display disappears

each time you turn the ignition off.

Content providers are using the digital rights

management technology for Windows Media

contained in this device (“WM-DRM”) to protect

the integrity of their content (“Secure Content”) so

that their intellectual property, including copyright,

in such content is not misappropriated.

This device uses WM-DRM software to play

Secure Content (“WM-DRM Software”). If the

security of the WM-DRM Software in this device

has been compromised, owners of Secure Content

(“Secure Content Owners”) may request that

Microsoft revoke the WM-DRM Software’s right

to acquire new licenses to copy, display and/or

play Secure Content. Revocation does not alter the

WM-DRM Software’s ability to play unprotected

content. A list of revoked WM-DRM Software is

sent to your device whenever you download a

license for Secure Content from the Internet or

from a PC. Microsoft may, in conjunction with

such license, also download revocation lists onto

your device on behalf of Secure Content Owners.

3

Table of Contents

Getting Started

Playable discs on this unit . . . . . . . . . . . . . . . . . 4

Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 4

Canceling the DEMO mode . . . . . . . . . . . . . . . 4

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4

Detaching the front panel . . . . . . . . . . . . . . . . . 5

Attaching the front panel . . . . . . . . . . . . . . . 5

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Searching for a track . . . . . . . . . . . . . . . . . . . . . 8

Searching a track by name

— Quick-BrowZer . . . . . . . . . . . . . . . . . . . . 8

Searching a track by listening to track passages

— ZAPPIN . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Radio

Storing and receiving stations . . . . . . . . . . . . . . 9

Storing automatically — BTM . . . . . . . . . . . 9

Storing manually. . . . . . . . . . . . . . . . . . . . . . 9

Receiving the stored stations . . . . . . . . . . . . 9

Tuning automatically . . . . . . . . . . . . . . . . . . 9

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Setting AF and TA . . . . . . . . . . . . . . . . . . . 10

Selecting PTY . . . . . . . . . . . . . . . . . . . . . . . 11

Setting CT. . . . . . . . . . . . . . . . . . . . . . . . . . 11

CD

Display items . . . . . . . . . . . . . . . . . . . . . . . 11

Repeat and shuffle play . . . . . . . . . . . . . . . 11

USB devices

Playing back a USB device. . . . . . . . . . . . . . . 12

Display items . . . . . . . . . . . . . . . . . . . . . . . 12

Repeat and shuffle play . . . . . . . . . . . . . . . 13

Other functions

Changing the sound settings . . . . . . . . . . . . . . 13

Adjusting the sound characteristics . . . . . . 13

Customizing the equalizer curve

— EQ3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Adjusting setup items — SET . . . . . . . . . . . . 14

Using optional equipment. . . . . . . . . . . . . . . . 15

Auxiliary audio equipment. . . . . . . . . . . . . 15

Card remote commander RM-X114. . . . . . 15

Rotary commander RM-X4S . . . . . . . . . . . 16

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 17

Playback order of MP3/WMA/AAC

files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 18

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 19

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 19

Error displays/Messages. . . . . . . . . . . . . . . 21

Support site

If you have any questions or for the latest support information on this

product, please visit the web site below:

http://support.sony-europe.com

Provides information on:

• Models and manufacturers of compatible digital audio players

• Supported MP3/WMA/AAC files

4

Getting Started

Playable discs on this unit

This unit can play CD-DA (also containing CD

TEXT) and CD-R/CD-RW (MP3/WMA/AAC

files (page 17)).

Resetting the unit

Before operating the unit for the first time, or

after replacing the car battery or changing the

connections, you must reset the unit.

Detach the front panel (page 5) and press the

RESET button (page 6) with a pointed object,

such as a ball-point pen.

Note

Pressing the RESET button will erase the clock setting

and some stored contents.

Canceling the DEMO mode

You can cancel the demonstration display which

appears during turning off.

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until “DEMO” appears.

3 Rotate the control dial to select

“DEMO-OFF.”

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until “CLOCK-ADJ” appears.

3 Press (SEEK) +.

The hour indication flashes.

4 Rotate the control dial to set the hour

and minute.

To move the digital indication, press (SEEK)

+/–.

5 After setting the minute, press the

select button.

The setup is complete and the clock starts.

To display the clock, press (DSPL). Press

(DSPL) again to return to the previous display.

Tip

You can set the clock automatically with the RDS

feature (page 11).

Type of discs Label on the disc

CD-DA

MP3

WMA

AAC

5

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press , then pull it off towards you.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

• Do not detach the front panel during playback of the

USB device, otherwise USB data may be damaged.

Attaching the front panel

Engage part A of the front panel with part B of

the unit, as illustrated, and push the left side into

position until it clicks.

Note

Do not put anything on the inner surface of the front

panel.

B

A

6

Location of controls and basic operations

Main unit

This section contains instructions on the location

of controls and basic operations. For details, see

the respective pages.

For USB device operation, see “USB devices” on

page 12.

A OFF button

To power off; stop the source.

B (BACK) button page 8

To return to the previous display.

C SOURCE button

To power on; change the source (Radio/CD/

USB/AUX).

D (BROWSE) button page 8

To enter the Quick-BrowZer mode.

E Control dial/select button

To adjust volume (rotate); select setup items

(press and rotate).

F Disc slot

Insert the disc (label side up), playback

starts.

G Display window

H Z (eject) button

To eject the disc.

I USB terminal page 12

To connect to the USB device.

J SEEK +/– buttons

CD/USB:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); reverse/fast-

forward a track (press and hold).

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

K (front panel release) button page 5

L MODE button page 9

To select the radio band (FM/MW/LW).

M Receptor for the card remote

commander

N RESET button (located behind the front

panel) page 4

O ZAP button page 9

To enter ZAPPIN mode.

P AF (Alternative Frequencies)/TA

(Traffic Announcement)/PTY

(Program Type) button page 10, 11

To set AF and TA (press); select PTY (press

and hold) in RDS.

ALBM ARTIST TRACK SHUF ZAP

+

DM

LOUDDISCREGTPTAAF

AUX

ZAP

PAUSE

REPPTY SHUF SCRL

OFF

1 2 3 4 5 6

DM

ALBM

SOURCE

MODE

SEEK

PUSH ENTER

/

SELECT

DSPLAF/TA

1

q

a

q

;

9

2

q

s

q

k

q

l

q

h

4 65 7

8

3

q

j

q

g

q

d

q

f

7

Q Number buttons

CD/USB:

(1)/(2): ALBM –/+ (during MP3/WMA/

AAC playback)

To skip albums (press); skip albums

continuously (press and hold).

(3): REP page 11, 13

(4): SHUF page 11, 13

(5): DM+

Improves digitally compressed sound,

such as MP3.

To activate the DM+ function, set

“ON.” To cancel, set “OFF.”

(6): PAUSE

To pause playback. To cancel, press

again.

Radio:

To receive stored stations (press); store

stations (press and hold).

R DSPL (display)/SCRL (scroll) button

page 10, 11, 12

To change display items (press); scroll the

display item (press and hold).

S AUX input jack page 15

To connect a portable audio device.

8

Searching for a track

Searching a track by name

— Quick-BrowZer

You can search for a track in a CD or USB device

easily by category.

1 Press (BROWSE).

The unit enters the Quick-BrowZer mode,

and the list of search categories appears.

2 Rotate the control dial to select the

desired search category, then press it

to confirm.

3 Repeat step 2 until the desired track is

selected.

Playback starts.

To return to the previous display

Press (BACK).

To exit the Quick-BrowZer mode

Press (BROWSE).

Note

When entering the Quick-BrowZer mode, the repeat/

shuffle setting is canceled.

Searching by skip items

— Jump mode

When many items are in a category, you can

search the desired item quickly.

1 Press (SEEK) + in Quick-BrowZer mode.

The following display appears.

A Current item number

B Total item number in the current layer

Then the item name will appear.

2 Rotate the control dial to select the desired

item, or one near the desired item.

It skips in steps of 10% of the total item

number.

3 Press the control dial.

The display returns to the Quick-BrowZer

mode and the selected item appears.

4 Rotate the control dial to select the desired

item and press it.

Playback starts if the selected item is a track.

To cancel Jump mode

Press (BACK) or (SEEK) –.

OFF

S

O

U

R

C

E

M

O

D

E

SEEK

PUSH ENTER

/

SELECT

S

E

K

(BROWSE)

Control dial/

select button

(BACK)

SEEK +/–

9

Searching a track by listening to

track passages — ZAPPIN

While playing back short track passages in a CD

or USB device in sequence, you can search for a

track you want to listen to.

ZAPPIN mode is suitable for searching for a

track in shuffle or shuffle repeat mode.

1 Press (ZAP) during playback.

After “ZAPPIN” appears in the display,

playback starts from a passage of the next

track.

The passage is played for the set time, then a

click sounds and the next passage starts.

2 Press the select button or (ZAP) when

a track you want to listen is played

back.

The track that you select returns to normal

play mode from the beginning.

To search a track by ZAPPIN mode again,

repeat steps 1 and 2.

Tips

• You can select the playback time from about 6

seconds/9 seconds/30 seconds (page 14).You

cannot select the passage of the track to playback.

• Press (SEEK) –/+ or (1)/(2) (ALBM –/+) in ZAPPIN

mode to skip a track or album.

• Pressing (BACK) also confirms a track to

playback.

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold the select button.

The setup display appears.

3 Press the select button repeatedly

until “BTM” appears.

4 Press (SEEK) +.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEM” appears.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Tip

When an RDS station is stored, the AF/TA setting is

also stored (page 10).

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

Tuning automatically

1 Select the band, then press (SEEK) +/–

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK) +/– to locate the

approximate frequency, then press (SEEK) +/–

repeatedly to fine adjust to the desired frequency

(manual tuning).

ZAP

OFF

S

O

U

R

C

E

M

O

D

E

SEEK

PUSH ENTER

/

SELECT

S

E

K

ZAP

Select button

(BACK)

ZAP

1

2

3

4

The part of each track to

playback in ZAPPIN mode.

Track

10

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio program signal.

Display items

A TA/TP*

1

B Radio band, Function

C Frequency*

2

(Program service name), Preset

number, Clock, RDS data

*1 “TA” flashes during traffic information. “TP” lights

up while such a station is received.

*2 While receiving the RDS station, “ *” is displayed

on the left of the frequency indication.

To change display items C, press (DSPL).

RDS services

This unit automatically provides RDS services as

follows:

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

Setting AF and TA

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Tip

If you adjust the volume level during a traffic

announcement, that level will be stored into memory

for subsequent traffic announcements, independently

from the regular volume level.

Staying with one regional program

— REG

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional program’s reception

area, set “REG-OFF” in setup during FM

reception (page 14).

Note

This function does not work in the UK and in some

other areas.

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same program during a long-distance drive

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Program)

Provides current traffic information/programs.

Any information/program received, will

interrupt the currently selected source.

PTY (Program Types)

Displays the currently received program type.

Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

Select To

AF-ON activate AF and deactivate TA.

TA-ON activate TA and deactivate AF.

AF, TA-ON activate both AF and TA.

AF, TA-OFF deactivate both AF and TA.

11

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

Selecting PTY

1 Press and hold (AF/TA) (PTY) during

FM reception.

The current program type name appears if the

station is transmitting PTY data.

2 Press (AF/TA) (PTY) repeatedly until

the desired program type appears.

3 Press (SEEK) +/–.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Note

You cannot use this function in countries/regions

where no PTY data is available.

Setting CT

1 Set “CT-ON” in setup (page 14).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

CD

Display items

A Source

B Track name*

1

, Disc/artist name*

1

, Artist

name*

1

, Album number*

2

, Album name*

1

,

Track number/Elapsed playing time, Clock

*1 The information of a CD TEXT, MP3/WMA/AAC is

displayed.

*2 Album number is displayed only when the album is

changed.

To change display items B, press (DSPL).

Tip

Displayed items will differ depending on the disc type,

recording format and settings.

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

* When an MP3/WMA/AAC is played.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

NEWS (News), AFFAIRS (Current Affairs),

INFO (Information), SPORT (Sports),

EDUCATE (Education), DRAMA (Drama),

CULTURE (Culture), SCIENCE (Science),

VARIED (Varied), POP M (Popular Music),

ROCK M (Rock Music), EASY M (Easy

Listening), LIGHT M (Light Classical),

CLASSICS (Classical), OTHER M (Other

Music Type), WEATHER (Weather),

FINANCE (Finance), CHILDREN (Children’s

Programs), SOCIAL A (Social Affairs),

RELIGION (Religion), PHONE IN (Phone In),

TRAVEL (Travel), LEISURE (Leisure), JAZZ

(Jazz Music), COUNTRY (Country Music),

NATION M (National Music), OLDIES (Oldies

Music), FOLK M (Folk Music), DOCUMENT

(Documentary)

Select To play

TRACK track repeatedly.

ALBUM* album repeatedly.

SHUF ALBUM* album in random order.

SHUF DISC disc in random order.

12

USB devices

For details on the compatibility of your USB

device, visit the support site.

• MSC (Mass Storage Class) and MTP (Media

Transfer Protocol) type USB devices compliant

with the USB standard can be used.

• Corresponding codec is MP3 (.mp3), WMA

(.wma) and AAC (.m4a).

• Backup of data in a USB device is

recommended.

Note

Connect the USB device after starting the engine.

Depending on the USB device, malfunction or damage

may occur if it is connected before starting the engine.

Playing back a USB device

1 Connect the USB device to the USB

terminal.

When using a cable, use the one supplied with

the USB device to connect.

Playback starts.

If a USB device is already connected, to start

playback, press (SOURCE) repeatedly until

“USB” appears.

Press (OFF) to stop playback.

Removing the USB device

1 Stop the USB device playback.

2 Remove the USB device.

If you remove your USB device during

playback, data in the USB device may be

damaged.

Notes

• Do not use USB devices so large or heavy that they

may fall down due to vibration, or cause a loose

connection.

• Do not detach the front panel during playback of the

USB device, otherwise USB data may be damaged.

• This unit cannot recognize USB devices via a USB

hub.

Display items

A Source

B Track name, Artist name, Album number*,

Album name, Track number/Elapsed playing

time, Clock

* Album number is displayed only when the album is

changed.

To change display items B, press ( D SPL).

Notes

• Displayed items will differ, depending on the USB

device, recorded format and settings. For details,

visit the support site.

• The maximum number of displayable data is as

follows.

– folders (albums): 128

– files (tracks) per folder: 500

• Do not leave a USB device in a parked car, as

malfunction may result.

• It may take time for playback to begin, depending on

the amount of recorded data.

• DRM (Digital Rights Management) files may not be

played.

• During playback or fast-forward/reverse of a VBR

(Variable Bit Rate) MP3/WMA/AAC file, elapsed

playing time may not display accurately.

• Playback of a lossless compression file is not

supported.

Support site

http://support.sony-europe.com

13

Repeat and shuffle play

1 During playback, press (3) (REP) or (4)

(SHUF) repeatedly until the desired setting

appears.

After 3 seconds, the setting is complete.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the select button repeatedly

until the desired item appears.

2 Rotate the control dial to adjust the

selected item.

3 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

The following items can be set (follow the page

reference for details):

Select To play

TRACK track repeatedly.

ALBUM album repeatedly.

SHUF ALBUM album in random order.

SHUF DEVICE device in random order.

EQ3

Selects an equalizer curve from 7 music types.

LOW*

1

, MID*

1

, HI*

1

(page 14)

BAL (Balance)

Adjusts the sound balance between the left and

right speakers.

FAD (Fader)

Adjusts the relative level between the front and

rear speakers.

SUB (Subwoofer volume)*

2

Adjusts the subwoofer volume.

(“ATT” is the lowest setting.)

AUX (AUX level)*

3

Adjusts the volume level for each connected

auxiliary equipment: “+18 dB”– “0 dB” – “–8

dB.”

This setting negates the need to adjust the

volume level between sources.

*1 When EQ3 is activated.

*2 When the audio output is set to “SUB-OUT”

(page 14).

*3 When AUX source is activated.

14

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press the select

button repeatedly to select “EQ3.”

2 Rotate the control dial to select

“CUSTOM.”

3 Press the select button repeatedly

until “LOW,” “MID” or “HI” appears.

4 Rotate the control dial to adjust the

selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

5 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the control dial to select the

setting (example “ON” or “OFF”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

CLOCK-ADJ (Clock Adjust) (page 4)

CT (Clock Time) (page 10, 11)

BEEP

Activates the beep sound: “ON,” “OFF.”

AUX-A*

1

(AUX Audio)

Activates the AUX source display: “ON,”

“OFF” (page 15).

A.OFF

Shuts off automatically after a desired time

when the unit is turned off: “NO,” “30S

(seconds),” “30M (minutes),” “60M (minutes).”

SUB/REAR*

1

Switches the audio output: “SUB-OUT”

(subwoofer), “REAR-OUT” (power amplifier).

DEMO

(Demonstration)

Activates the demonstration: “ON,” “OFF.”

DIM (Dimmer)

Changes the display brightness: “ON,” “OFF.”

M.DSPL (Motion Display)

Selects the Motion Display mode.

– “SA”: to show moving patterns and spectrum

analyzer.

– “OFF”: to deactivate the Motion Display.

A.SCRL (Auto Scroll)

Scrolls long items automatically: “ON,” “OFF.”

LOCAL (Local Seek Mode)

– “ON”: to only tune into stations with stronger

signals.

– “OFF”: to tune normal reception.

MONO*

2

(Monaural Mode)

Selects monaural reception mode to improve

poor FM reception: “ON,” “OFF.”

REG*

2

(Regional) (page 10)

Z.TIME (Zappin Time)

Selects the playback time for the ZAPPIN

function.

– “Z.TIME-1 (6 seconds),” “Z.TIME-2 (9

seconds),” “Z.TIME-3 (30 seconds).”

LPF*

3

(Low Pass Filter)

Selects the subwoofer cut-off frequency: “OFF,”

“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz.”

LPF NORM/REV*

3

(Low Pass Filter Normal/

Reverse)

Selects the phase when the LPF is on: “NORM,”

“REV.”

HPF (High Pass Filter)

Selects the front/rear speaker cut-off frequency:

“OFF,” “80Hz,” “100Hz,” “120Hz,” “140Hz,”

“160Hz.”

LOUD (Loudness)

Reinforces bass and treble for clear sound at low

volume levels: “ON,” “OFF.”

BTM (page 9)

*1 When the unit is turned off.

*2 When FM is received.

*3 When the audio output is set to “SUB-OUT.”

15

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device

to the AUX input jack (stereo mini jack) on the

unit and then simply selecting the source, you

can listen on your car speakers. The volume level

is adjustable for any difference between the unit

and the portable audio device. Follow the

procedure below:

Connecting the portable audio

device

1 Turn off the portable audio device.

2 Turn down the volume on the unit.

3 Connect to the unit.

* Be sure to use a straight type plug.

Adjust the volume level

Be sure to adjust the volume for each connected

audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX”

appears.

“AUX FRONT IN” appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Adjust the input level (page 13).

Card remote commander RM-X114

The corresponding buttons on the card remote

commander control the same functions as those

on this unit.

The following buttons on the card remote

commander have also different buttons/functions

from the unit.

• DSPL (display) button

To change display items.

• </, (SEEK –/+) buttons

To control radio/CD/USB, the same as (SEEK)

–/+ on the unit.

• SOUND button

The same as the select button on the unit.

• LIST button

To select PTY in RDS.

• M/m (DISC*/PRESET +/–) buttons

To control CD/USB, the same as (1)/(2)

(ALBM –/+) buttons on the unit.

• ATT (attenuate) button

To attenuate the sound. To cancel, press again.

* Not available for this unit.

Note

If the unit is turned off and the display disappears, it

cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is

inserted to activate the unit first.

AUX

Connecting cord*

(not supplied)

DISC

–

ATTOFF

DSPL MODE

SOURCE

DISC

+

VOL

+

–

PRESET

+

SEEK

+

SEEK

–

PRESET –

SOUND

E

N

T

E

R

MENU

LIST

MODE

LIST

ENTER

*

ATT

DSPL

MENU

*

SOURCE

</,

(SEEK –/+ )

SOUND

OFF

VOL (+/ –)

m/M

(DISC/

PRESET

+/ –)

16

Rotary commander RM-X4S

Attaching the label

Attach the indication label depending on how

you mount the rotary commander.

Location of controls

The corresponding buttons on the rotary

commander control the same functions as those

on this unit.

The following controls on the rotary commander

require a different operation from the unit.

• ATT (attenuate) button

To attenuate the sound. To cancel, press again.

• PRESET/DISC* control

CD/USB: The same as (1)/(2) (ALBM –/+)

on the unit (push in and rotate).

Radio: To receive stored stations (push in and

rotate).

• VOL (volume) control

The same as the control dial on the unit (rotate).

• SEEK/AMS control

The same as (SEEK) +/– on the unit (rotate, or

rotate and hold).

• DSPL (display) button

To change display items.

* Not available for this unit.

Changing the operative direction

The operative direction of the controls is factory-

set as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

1 While pushing the VOL control, press and

hold (SEL).

SEL

DS

PL

M

O

D

E

S

E

L

D

S

P

L

M

O

D

E

OFF

ATT

SEL

SOURCE

DSPL

MODE

OFF

VOL

SEEK/AMS

PRESET/

DISC

To increase

To decrease

17

Additional Information

Precautions

• Cool off the unit beforehand if your car has been

parked in direct sunlight.

• Power antenna (aerial) extends automatically.

Moisture condensation

Should moisture condensation occur inside the unit,

remove the disc and wait for about an hour for it to

dry out; otherwise the unit will not operate properly.

To maintain high sound quality

Do not splash liquid onto the unit or discs.

Notes on discs

• Do not expose discs to direct sunlight or heat

sources such as hot air ducts, nor leave it in a car

parked in direct sunlight.

• Before playing, wipe the discs

with a cleaning cloth from the

center out. Do not use solvents

such as benzine, thinner,

commercially available

cleaners.

• This unit is designed to

playback discs that conform to

the Compact Disc (CD)

standard. DualDiscs and some of the music discs

encoded with copyright protection technologies do

not conform to the Compact Disc (CD) standard,

therefore, these discs may not be playable by this

unit.

• Discs that this unit CANNOT play

– Discs with labels, stickers, or sticky tape or

paper attached. Doing so may cause a

malfunction, or may ruin the disc.

– Discs with non-standard shapes (e.g., heart,

square, star). Attempting to do so may damage

the unit.

–8 cm (3

1

/4 in) discs.

Notes on CD-R/CD-RW discs

• The maximum number of: (CD-R/CD-RW only)

– folders (albums): 150 (including root folder)

– files (tracks) and folders: 300 (may less than 300

if folder/file names contain many characters)

– displayable characters for a folder/file name: 32

(Joliet)/64 (Romeo)

• If the multi-session disc begins with a CD-DA

session, it is recognized as a CD-DA disc, and

other sessions are not played back.

• Discs that this unit CANNOT play

– CD-R/CD-RW of poor recording quality.

– CD-R/CD-RW recorded with an incompatible

recording device.

– CD-R/CD-RW which is finalized incorrectly.

– CD-R/CD-RW other than those recorded in

music CD format or MP3 format conforming to

ISO9660 Level 1/Level 2, Joliet/Romeo or

multi-session.

Playback order of MP3/WMA/AAC

files

Maintenance

Replacing the lithium battery of the

card remote commander

Under normal conditions, the battery will last

approximately 1 year. (The service life may be

shorter, depending on the conditions of use.)

When the battery becomes weak, the range of the

card remote commander becomes shorter. Replace

the battery with a new CR2025 lithium battery. Use

of any other battery may present a risk of fire or

explosion.

continue to next page t

Folder

(album)

MP3/WMA/

AAC file

(track)

MP3/WMA/AAC

x

+ side up

18

Notes on the lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse blows,

check the power connection and

replace the fuse. If the fuse

blows again after replacement,

there may be an internal

malfunction. In such a case,

consult your nearest Sony

dealer.

Cleaning the connectors

The unit may not function properly if the connectors

between the unit and the front panel are not clean. In

order to prevent this, detach the front panel (page 5)

and clean the connectors with a cotton swab. Do not

apply too much force. Otherwise, the connectors

may be damaged.

Notes

• For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition

switch.

• Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1 Remove the protection collar.

1Detach the front panel (page 5).

2Pinch both edges of the protection collar,

then pull it out.

2 Remove the unit.

1Insert both release keys simultaneously

until they click.

2Pull the release keys to unseat the unit.

3Slide the unit out of the mounting.

WARNING

Battery may explode if mistreated.

Do not recharge, disassemble, or dispose of

in fire.

Fuse (10 A)

Main unit

Back of the front

panel

x

Hook facing

inwards.

19

Specifications

CD Player section

Signal-to-noise ratio: 120 dB

Frequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

FM

Tuning range: 87.5 – 108.0 MHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 150 kHz

Usable sensitivity: 10 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 70 dB (mono)

Separation: 40 dB at 1 kHz

Frequency response: 20 – 15,000 Hz

MW/LW

Tuning range:

MW: 531 – 1,602 kHz

LW: 153 – 279 kHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 25 kHz

Sensitivity: MW: 26 µV, LW: 45 µV

USB Player section

Interface: USB (Full-speed)

Maximum current: 500mA

Power amplifier section

Output: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohms

Maximum power output: 52 W × 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front, sub/rear switchable)

Power antenna (aerial) relay control terminal

Power amplifier control terminal

Inputs:

Remote controller input terminal

Antenna (aerial) input terminal

Telephone ATT control terminal

AUX input jack (stereo mini jack)

USB signal input terminal

Tone controls:

Low: ±10 dB at 60 Hz (XPLOD)

Mid: ±10 dB at 1 kHz (XPLOD)

High: ±10 dB at 10 kHz (XPLOD)

Power requirements: 12 V DC car battery

(negative ground (earth))

Power supply voltage: 11 – 16 V

Dimensions: Approx. 178 × 50 × 179 mm

(7

1

/8 × 2 × 7

1

/8 in) (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 162 mm

(7

1

/4 × 2

1

/8 × 6

1

/2 in) (w/h/d)

Mass: Approx. 1.2 kg (2 lb 11 oz)

Supplied accessory:

Parts for installation and connections (1 set)

Optional accessories/equipment:

Card remote commander: RM-X114

Rotary commander: RM-X4S

Your dealer may not handle some of the above listed

accessories. Please ask the dealer for detailed

information.

Design and specifications are subject to change

without notice.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check the

connection and operating procedures.

If the problem is not solved, visit the following

support site.

General

No power is being supplied to the unit.

• Check the connection or fuse.

• If the unit is turned off and the display disappears, it

cannot be operated with the remote commander.

t Turn on the unit.

The power antenna (aerial) does not extend.

The power antenna (aerial) does not have a relay box.

No sound.

• The ATT function is activated, or the Telephone ATT

function (when the interface cable of a car telephone

is connected to the ATT lead) is activated.

• The position of the fader control “FAD” is not set for

a 2-speaker system.

No beep sound.

• The beep sound is canceled (page 14).

• An optional power amplifier is connected and you are

not using the built-in amplifier.

The contents of the memory have been erased.

• The RESET button has been pressed.

t Store again into the memory.

• The power supply lead or battery has been

disconnected or it is not connected properly.

continue to next page t

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• Packaging cushions are made from paper.

Support site

http://support.sony-europe.com

20

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the ignition

is switched.

The leads are not matched correctly with the car’s

accessory power connector.

During playback or reception, demonstration

mode starts.

If no operation is performed for 5 minutes with

“DEMO-ON” set, demonstration mode starts.

t Set “DEMO-OFF” (page 14).

The display disappears from/does not appear

in the display window.

• The dimmer is set “DIM-ON” (page 14).

• The display disappears if you press and hold (OFF).

tPress and hold (OFF) on the unit until the

display appears.

• The connectors are dirty (page 18).

The Auto Off function does not operate.

The unit is turned on. The Auto Off function activates

after turning off the unit.

t Turn off the unit.

CD playback

The disc cannot be loaded.

• Another disc is already loaded.

• The disc has been forcibly inserted upside down or in

the wrong way.

The disc does not playback.

• Defective or dirty disc.

• The CD-Rs/CD-RWs are not for audio use (page 17).

MP3/WMA/AAC files cannot be played back.

The disc is incompatible with the MP3/WMA/AAC

format and version. For details on playable discs and

formats, visit the support site.

MP3/WMA/AAC files take longer to play back

than others.

The following discs take a longer time to start

playback.

– a disc recorded with a complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added.

The display items do not scroll.

• For discs with very many characters, those may not

scroll.

• “A.SCRL” is set to “OFF.”

tSet “A.SCRL-ON” (page 14).

tPress and hold (DSPL) (SCRL).

The sound skips.

• Installation is not correct.

tInstall the unit at an angle of less than 45° in a

sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.

The disc will not eject.

Press the RESET button (page 4).

Radio reception

The stations cannot be received.

The sound is hampered by noises.

• The connection is not correct.

t Connect a power antenna (aerial) control lead

(blue) or accessory power supply lead (red) to the

power supply lead of a car’s antenna (aerial)

booster (only when your car has built-in FM/

MW/LW antenna (aerial) in the rear/side glass).

t Check the connection of the car antenna (aerial).

t If the auto antenna (aerial) will not go up, check

the connection of the power antenna (aerial)

control lead.

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Set “LOCAL-ON” (page 14).

t Tuning does not stop at a station:

Set “MONO-ON” (page 14).

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication

flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

t Set “MONO-ON” (page 14).

An FM program broadcast in stereo is heard in

monaural.

The unit is in monaural reception mode.

t Set “MONO-OFF” (page 14).

RDS

The SEEK starts after a few seconds of

listening.

The station is non-TP or has weak signal.

t Deactivate TA (page 10).

No traffic announcements.

• Activate TA (page 10).

• The station does not broadcast any traffic

announcements despite being TP.

t Tune in another station.

PTY displays “- - - - - - - -.”

• The current station is not an RDS station.

• RDS data has not been received.

• The station does not specify the program type.

USB playback

You cannot play back items via a USB hub.

This unit cannot recognize USB devices via a USB

hub.

Cannot play back items.

A USB device does not work.

t Reconnect it.

The USB device takes longer to play back.

The USB device contains files with a complicated tree

structure.

La pagina sta caricando ...

Sony CDX-GT430U Manuale del proprietario

Questo manuale è adatto anche per

Sony CDX-GT430U Manuale del proprietario

in altre lingue

Documenti correlati