Lexmark X6150 4408-AK2 Manuale utente

4408-XXX

Lexmark™ X6100 Series AIO

Lexmark and Lexmark with diamond

design are trademarks of Lexmark

International, Inc., registered in the

United States and/or other countries.

• Table of Contents

•Index

• Safety and Notices

• Trademarks

• Start Diagnostics

Edition: May 2003

The following paragraph does not apply to any country where such provisions are

inconsistent with local law: LEXMARK INTERNATIONAL, INC. PROVIDES THIS

PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do

not allow disclaimer of express or implied warranties in certain transactions; therefore, this

statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are

periodically made to the information herein; these changes will be incorporated in later

editions. Improvements or changes in the products or the programs described may be

made at any time.

Comments may be addressed to Lexmark International, Inc., Department D22A/032-2,

740 West New Circle Road, Lexington, Kentucky 40550, U.S.A or e-mail at

ServiceInfoAndTraining@Lexmark.com. Lexmark may use or distribute any of the

information you supply in any way it believes appropriate without incurring any obligation

to you. You can purchase additional copies of publications related to this product by

calling 1-800-553-9727. In other countries, contact your point of purchase.

Lexmark, Lexmark with diamond design, Color Jetprinter, and ColorFine are trademarks

of Lexmark International, Inc., registered in the United States and/or other countries.

Other trademarks are the property of their respective owners.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are

commercial computer software and documentation developed exclusively at private

expense.

4408-00X

U.S.A. P/N: 12G9253

Japanese P/N: 12G9254

Table of contents iii

4408-XXX

Table of contents

Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .x

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Machine types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Scanner specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Maintenance approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Diagnostic information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Power-On Self Test (POST) sequence . . . . . . . . . . . . . . . . . . . . 2-1

POST symptom table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Symptom tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Service checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Carrier Transport service check. . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

CCD Module Assembly service check. . . . . . . . . . . . . . . . . . . . . 2-8

Maintenance Station service check . . . . . . . . . . . . . . . . . . . . . . . 2-9

Paper Feed service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Paper Path service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Power service check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Print Quality service check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Scan/Copy Quality service check. . . . . . . . . . . . . . . . . . . . . . . . 2-16

Diagnostic aids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Test page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Repair information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Handling ESD-sensitive parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Removal procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Releasing plastic latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Print engine cover removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

ASF removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Base assembly removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Carrier removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Fax card removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

iv Service Manual

4408-00X

Maintenance station removal . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9

Midframe removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11

Print engine removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-12

Scanner lid assembly removal . . . . . . . . . . . . . . . . . . . . . . . . . .4-12

Scanner and ADF assembly removal . . . . . . . . . . . . . . . . . . . . .4-12

System board removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-15

Connector locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1

Preventive maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1

Lubrication specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1

Parts catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1

Assembly 1: Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2

Assembly 2: Paper feed, frame, and carrier transport . . . . . . . . . . . .7-6

Assembly 3: Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-1

Safety information v

4408-XXX

Safety information

• The safety of this product is based on testing and approvals of

the original design and specific components. The manufacturer

is not responsible for safety in the event of use of unauthorized

replacement parts.

• The maintenance information for this product has been

prepared for use by a professional service person and is not

intended to be used by others.

• There may be an increased risk of electric shock and personal

injury during disassembly and servicing of this product.

Professional service personnel should understand this and take

necessary precautions.

Consignes de Sécurité

• La sécurité de ce produit repose sur des tests et des

agréations portant sur sa conception d'origine et sur des

composants particuliers. Le fabricant n'assume aucune

responsabilité concernant la sécurité en cas d'utilisation de

pièces de rechange non agréées.

• Les consignes d'entretien et de réparation de ce produit

s'adressent uniquement à un personnel de maintenance

qualifié.

• Le démontage et l'entretien de ce produit pouvant présenter

certains risques électriques, le personnel d'entretien qualifié

devra prendre toutes les précautions nécessaires.

vi Service Manual

4408-XXX

Norme di sicurezza

• La sicurezza del prodotto si basa sui test e sull'approvazione

del progetto originale e dei componenti specifici. Il produttore

non è responsabile per la sicurezza in caso di sostituzione non

autorizzata delle parti.

• Le informazioni riguardanti la manutenzione di questo prodotto

sono indirizzate soltanto al personale di assistenza autorizzato.

• Durante lo smontaggio e la manutenzione di questo prodotto,

il rischio di subire scosse elettriche e danni alla persona è più

elevato. Il personale di assistenza autorizzato, deve, quindi,

adottare le precauzioni necessarie.

Sicherheitshinweise

• Die Sicherheit dieses Produkts basiert auf Tests und

Zulassungen des ursprünglichen Modells und bestimmter

Bauteile. Bei Verwendung nicht genehmigter Ersatzteile wird

vom Hersteller keine Verantwortung oder Haftung für die

Sicherheit übernommen.

• Die Wartungsinformationen für dieses Produkt sind

ausschließlich für die Verwendung durch einen

Wartungsfachmann bestimmt.

• Während des Auseinandernehmens und der Wartung des

Geräts besteht ein zusätzliches Risiko eines elektrischen

Schlags und körperlicher Verletzung. Das zuständige

Fachpersonal sollte entsprechende Vorsichtsmaßnahmen

treffen.

Safety information vii

4408-XXX

Pautas de Seguridad

• La seguridad de este producto se basa en pruebas y

aprobaciones del diseño original y componentes específicos.

El fabricante no es responsable de la seguridad en caso de uso

de piezas de repuesto no autorizadas.

• La información sobre el mantenimiento de este producto está

dirigida exclusivamente al personal cualificado de

mantenimiento.

• Existe mayor riesgo de descarga eléctrica y de daños

personales durante el desmontaje y la reparación de la

máquina. El personal cualificado debe ser consciente de este

peligro y tomar las precauciones necesarias.

Informações de Segurança

• A segurança deste produto baseia-se em testes e aprovações

do modelo original e de componentes específicos. O fabricante

não é responsável pela segunrança, no caso de uso de peças

de substituição não autorizadas.

• As informações de segurança relativas a este produto

destinam-se a profissionais destes serviços e não devem ser

utilizadas por outras pessoas.

• Risco de choques eléctricos e ferimentos graves durante a

desmontagem e manutenção deste produto. Os profissionais

destes serviços devem estar avisados deste facto e tomar os

cuidados necessários.

viii Service Manual

4408-XXX

Informació de Seguretat

• La seguretat d'aquest producte es basa en l'avaluació i

aprovació del disseny original i els components específics.

El fabricant no es fa responsable de les qüestions de

seguretat si s'utilitzen peces de recanvi no autoritzades.

• La informació pel manteniment d’aquest producte està

orientada exclusivament a professionals i no està destinada

a ningú que no ho sigui.

• El risc de xoc elèctric i de danys personals pot augmentar

durant el procés de desmuntatge i de servei d’aquest producte.

El personal professional ha d’estar-ne assabentat i prendre

les mesures convenients.

Safety information ix

4408-XXX

x Service Manual

4408-XXX

Preface

This manual contains maintenance procedures for service

personnel. It is divided into the following chapters:

1. General information contains a general description of the

printer and the maintenance approach used to repair it. Special

tools and test equipment are listed in this chapter, as well as

general environmental and safety instructions.

2. Diagnostic information contains an error indicator table,

symptom tables, and service checks used to isolate failing field

replaceable units (FRUs).

3. Diagnostic aids contains tests and checks used to locate or

repeat symptoms of printer problems.

4. Repair information provides instructions for making printer

adjustments and removing and installing FRUs.

5. Connector locations uses illustrations to identify the connector

locations and test points on the printer.

6. Preventive maintenance contains the lubrication specifications

and recommendations to prevent problems.

7. Parts catalog contains illustrations and part numbers for

individual FRUs.

Definitions

CAUTION: A caution identifies something that might cause a

servicer harm.

Warning: A warning identifies something that might damage the

printer hardware or software.

Note: A note provides additional information.

General information 1-1

4408-XXX

1. General information

The Lexmark™ X6170 4408-K01/AK1 and X6150 4408-K02/AK2

machines feature an electro-mechanical color scanner, printer,

copier, and fax that creates characters and graphics by composing

programmed patterns of ink dots using a printhead and liquid ink.

The printhead uses small heater plates and nozzles to control ink

flow and the formation of characters on the print media. The

printhead assembly and ink supply are combined into a single-unit,

print cartridge available as a customer replaceable supply item. Dual

printheads provide color and true black printing without changing

printheads. The number and size of inkjets or nozzles, in the

printhead, determines the overall quality and capability of the printer.

The black cartridge has a total of 208 nozzles and installs on the left.

The color cartridge has a total of 192 nozzles and installs on the

right. The printer is capable of printing in two directions from either

cartridge.

Power consumption

• 2.55 Watts - Sleep

• 3.107 Watts - Printing

• 6.64 Watts - Idle

Machine types

4408-K01/AK1 4408-K02/AK2

1-2 Service Manual

4408-XXX

Scanner specifications

Scanner Type Flatbed, CCD

Scan Modes True Color:

48 Bit Internal (68.7 billion colors)

24 Bit External (16.7 million colors)

Gray Mode:

12 Bit Internal (4,096 shades of

gray)

8 Bit External (256 shades of gray)

Text/Line Art:

1 Bit Per Pixel

Scan Method One Pass Scanning

Scan Area 8.5 X 11.7 inches

216 X 292 mm

Scan Resolution Flatbed Scanning:

-Optical: 1200 (H) x 4800 ppi (V)

-Interpolated: 19,200 x 19,200 ppi

ADF Scanning (4408-K01/AK1) only

-Optical: 600 (H) x 300 ppi (V)

Resolution/Quality

(Applicable when operating via

standalone mode)

Selectable via Contorl Panel

-Quick- 300 x 300 ppi Scan

600 x 300 dpi Print

-Normal- 300 x 600 ppi Scan

600 x 600 dpi Print

-Better- 600 x 600 ppi Scan

600 x 600 dpi Print

-Best- 600 x 600 ppi Scan

600 x 600 dpi Print

Notes:

1) Photo Mode = Best Mode

2) The number of printhead passes

will increase with the quality mode.

General information 1-3

4408-XXX

Resolution/Quality

(Applicable when operating via

Host)

Selectable via All-In-One GUI for

Color/Gray

-Quick- 75 x 75 ppi Scan

600 x 300 dpi Print

-Normal- 150 x 150 ppi Scan

600 x 600 dpi Print

-Better- 200 x 200 ppi Scan

1200 x 1200 dpi Print

-Best- 300 x 300 ppi Scan

2400 x 1200 dpi Print

Selectable via All-In-One GUI for

Black Copy

-Quick- 150 x 150 ppi Scan

600 x 300 dpi Print

-Normal- 300 x 300 ppi Scan

600 x 600 dpi Print

-Better- 600 x 600 ppi Scan

1200 x 1200 dpi Print

-Best- 600 x 1200 ppi Scan

2400 x 1200 dpi Print

1-4 Service Manual

4408-XXX

Control panel

Press: To:

Number of

Copies

Select the number of copies.

Lighter/Darker Lighten or darken a copy.

Reduce/Enlarge Make the document smaller or larger.

Left arrow <

Right arrow>

Scroll through menu sub-categories.

Options Scroll through the list of menu headings.

Select Choose the displayed selection.

Quality Choose normal, better, best, or quick copy setting.

Color Copy Make a color copy.

General information 1-5

4408-XXX

Maintenance approach

The diagnostic information in this manual leads you to the correct

field replaceable unit (FRU) or part. Use the symptom index, service

checks, and diagnostic aids to determine the symptom and repair

the failure.

After you complete the repair, perform tests as needed to verify the

repair.

Black Copy Make a black and white copy.

Scan Scan after selecting a Scan To destination.

Stop/Clear Cancel a scan, print, or copy job, or return to a menu

category from a menu sub-category.

Power Turn the printer on or off.

Press: To:

1-6 Service Manual

4408-XXX

Abbreviations

B/M Bill of Material

CCD Charge Coupled Device

EOF End of Form

ESD Electrostatic Discharge

FPC Flat Printhead Cable

FRU Field Replaceable Unit

HVPS High Voltage Power Supply

LCD Liquid Crystal Display

LVPS Low Voltage Power Supply

OEM Original Equipment Manufacturer

V ac Volts alternating current

V dc Volts direct current

ZIF Zero Insertion Force

Diagnostic information 2-1

4408-XXX

2. Diagnostic information

Start

Use the symptom tables, service checks, and diagnostic aids in this

chapter, to determine the printer failure.

Power-On Self Test (POST) sequence

Press the Power button to turn machine on.

• The Power, Copy, Scan, and Fax indicator lights turn on.

• The Charge-Coupled Device (CCD) moves to the right, and

then to the left.

• The paper feed motor runs then stops.

• The carrier moves and then returns to the maintenance station.

• The Power and Copy buttons stay on.

• The following message is displayed on the LCD.

If your printer completes POST with no errors, go to the “Symptom

tables” on page 2-3, locate the symptom and take the indicated

action.

If your printer does not complete POST, locate the symptom in the

following table and take the indicated action.

Normal

PY

1

2-2 Service Manual

4408-XXX

POST symptom table

Symptom Action

No Power, Copy,

Fax, or Scan

lights and no

motors run.

Go to the “Power service check” on page 2-13. If okay,

go to the “Control panel problems” on page 2-3.

Paper feed

gears do not

turn

Go to the “Paper Feed service check” on page 2-10.

Carrier does not

move

Go to the “Carrier Transport service check” on

page 2-6.

Carrier slams

side frame

Go to the “Carrier Transport service check” on

page 2-6.

CCD does not

move

Go to the “Maintenance Station service check” on

page 2-9.

CCD lamp does

not turn on

Go to the “CCD Module Assembly service check” on

page 2-8.

LCD displays

“Unlock

Scanner”

Go to the “CCD Module Assembly service check” on

page 2-8.

Diagnostic information 2-3

4408-XXX

Symptom tables

Locate the symptom in the following tables and take the appropriate

action.

Carrier transport problems

Maintenance station problems

Control panel problems

Symptom Action

• No carrier movement

• Slow carrier movement

• Carrier stops

• Carrier slams side frame

Go to the “Carrier Transport

service check” on page 2-6.

Symptom Action

Maintenance station:

• Fails to cap the printheads

• Fails to clean the printheads

Go to the “Maintenance Station

service check” on page 2-9.

Symptom Action

• Buttons do not work

• LCD does not display

Check control panel cable

connection at J4 on the system

board. Then run the “Power-On Self

Test (POST) sequence” on

page 2-1.

If the LED buttons or any lights fail,

check connection J4. If the problem

remains, replace the scanner

assembly. Go to the “Scanner and

ADF assembly removal” on

page 4-12.

If the problem still exists, replace the

system board. Go to the “System

board removal” on page 4-15.

2-4 Service Manual

4408-XXX

Printer communication table

Scanner problems

Symptom Action

• Not able to print Test Page Check the USB cable and system

board cable connections. If okay,

replace system board. Go to the

“System board removal” on

page 4-15.

Symptom Action

• CCD does not move

• Lamp does not light

Go to the “CCD Module Assembly

service check” on page 2-8.

• Control panel displays “Unlock

Scanner”

To unlock the scanner, press the

scanner lock located under the

scanner assembly.

• Scanned images are: faded, or

colors are dull, blurry or fuzzy.

Images are slanted or crooked

and the strait lines in the image

appear to be jagged or uneven.

• Blank copies

Go to the “Scan/Copy Quality

service check” on page 2-16.

La pagina sta caricando ...

Lexmark X6150 4408-AK2 Manuale utente

Questo manuale è adatto anche per

Lexmark X6150 4408-AK2 Manuale utente

in altre lingue

Documenti correlati

Altri documenti