Silkn BRIGHT ANSIKTSBØRSTE, LILLA Manuale utente

BRIGHT / BRIGHT MINI

ND-FC04 / ND-FC05

ID: #05007

m

y

h

a

n

s

e

c

o

n

t

r

o

l

.

c

o

m

M

A

N

U

A

L

D

E

V

E

L

O

P

E

D

I

N

G

E

R

M

A

N

Y

User-friendly

Manual

A

B

2

C

7

6

5

4

3

9

10

11

1 2

2

3

8

1. 2. 3. 4.

1 6

8

BRIGHT MINI

BRIGHT

Note: The content of the box may vary based on the version purchased.

Hinweis: Der Lieferumfang kann abhängig von der gekauften Version variieren.

Avis: Le contenu de la livraison peut varier en fonction de la version achetée.

Let op: De verpakkingsinhoud kan variëren afhankelijk van de gekochte versie.

Aviso: El volumen de suministro puede variar en función de la versión adquirida.

Aviso: O volume de fornecimento pode variar em função da versão adquirida.

Υπόδειξη: Ο παραδοτέος εξοπλισμός μπορεί να διαφέρει με βάση την έκδοση που έχετε αγοράσει.

Uyarı: Teslimat kapsamı, satın alınan versiyondan farklı olabilir.

Avviso: La dotazione può variare a seconda della versione acquistata.

Merk: Leveringsomfang kan avvike fra den kjøpte versjonen.

Obs: Leveransomfånget kan variera beroende på vilken version man har köpt.

Bemærk: Leveringsomfanget kan variere, alt afhængig af den købte version.

9

10

11

3

Legal notice

Home Skinovations Ltd. reserves the right to make changes to its

products or speciﬁcations to improve performance, reliability, or

manufacturability. Information furnished by Home Skinovations Ltd.

is believed to be accurate and reliable at the time of publication.

However, Home Skinovations Ltd. assumes no responsibility for its

use. No license is granted by its implication or otherwise under any

patent or patent rights of Home Skinovations Ltd.

No part of this document may be reproduced or transmitted

in any form or by any means, electronic or mechanical, for any

purpose, without the express written permission of Home

Skinovations Ltd. Data is subject to change without notiﬁcation.

Home Skinovations Ltd. has patents and pending patent

applications, trademarks, copyrights, or other intellectual property

rights covering subject matter in this document. The furnishing

of this document does not give you any license to these patents,

trademarks, copyrights, or other intellectual property rights except

as expressly provided in any written agreement from Home

Skinovations Ltd. Speciﬁcations are subject to change without

notice.

Silk’n and the Silk’n logo are registered trademarks of Home

Skinovations Ltd.

Invention Works B.V.

Donk 1B, 2991 LE Barendrecht, The Netherlands

www.silkn.eu – inf[email protected]

4

EN

Table of contents

1 Package contents/device parts ______________ 5

2 General information _______________________ 5

2.1 Reading and storing the user manual ______________ 5

2.2 Explanation of symbols _________________________ 5

3 Safety _____________________________________ 7

3.1 Proper use __________________________________ 7

3.2 Safety instructions _____________________________ 7

4 Checking the facial brush and package

contents ___________________________________ 12

5 Charging __________________________________ 12

6 Operation _________________________________ 13

6.1 Using dierent areas of the facial brush ____________ 13

6.2 Operation modes and speed settings ______________ 13

6.3 Using the “Bright” version _______________________ 14

6.4 Using the “Bright Mini” version ___________________ 14

6.5 Starting and ending the treatment ________________ 15

7 Treatment steps ___________________________ 15

8 Cleaning ___________________________________ 16

9 Storage ____________________________________ 17

10 Troubleshooting ___________________________ 17

11 Technical data _____________________________ 17

12 Disposal ___________________________________ 18

12.1 Disposing of the packaging ______________________ 18

12.2 Disposing of the facial brush _____________________ 18

13 Warranty __________________________________ 19

14 Customer service __________________________ 19

5

EN 1 Package contents/device parts

1Cleansing area (thicker studs) 7Decrease button ( )*

2Cleansing area (thinner studs) 8Charging port

3LED light 9USB cable

4Massaging area (ridges) 10 USB wall adapter

5Increase button ( )* 11 Travel case

6Control button ( )

* These buttons are not available on the “Bright Mini” version.

2 General information

2.1 Reading and storing the user manual

This user manual accompanies the silicone facial

cleansing brush – “Bright” or “Bright Mini”

(hereafter referred to as the “facial brush”), and

contains important information on setup and

handling.

Before using the facial brush, read the user manual carefully. This

particularly applies to the safety instructions. Failure to do so

may result in personal injury or damage to the facial brush. The

user manual is based on the standards and rules in force in the

European Union. When abroad, you must also observe country-

speciﬁc guidelines and laws. Store the user manual for further

use. Make sure to include this user manual when passing the facial

brush on to third parties.

2.2 Explanation of symbols

The following symbols and signal words are used in this user manual,

on the facial brush, USB wall adapter or packaging.

WARNING!

This signal symbol/word designates a hazard with moderate risk,

which may result in death or severe injury if not avoided.

NOTICE!

This signal word warns of possible damage to property.

6

EN

This signal symbol provides you with useful

additional information on handling and use.

Read the user manual.

Declaration of Conformity: Products labelled with

this symbol meet all applicable provisions of the

European Economic Area.

This symbol identifies electrical devices that belong

to the protection class III (device).

This symbol identifies electrical devices that belong

to the protection class II (USB wall adapter).

The word “GS” stands for tested safety. Products

marked with this symbol meet the requirements of

the German Product Safety Act (ProdSG).

Devices marked with this symbol are only suitable

for household use (dry indoor rooms).

This symbol identiﬁes voltage and the current rating

for direct current.

The international eciency mark indicates that the

power supply meets the level VI requirements.

IPX7 The facial brush is protected against water

immersion for up to 30 minutes at a depth of 1 m.

s

The USB wall adapter is equipped with a short-

circuit proof safety transformer.

sThe USB wall adapter has a switching power supply.

s

This symbol indicates the polarity of the pins in the

USB wall adapter.

IP20 The USB wall adapter is protected against solid

objects up to 12 mm.

ta Ambient temperature (USB wall adapter)

7

EN 3 Safety

3.1 Proper use

The facial brush is exclusively designed for facial cleansing and

massaging. It is only intended for private use and not suitable for

commercial purposes. The facial brush has been tested for water

ingress to the extent covered by IPX7. This means the device is

waterproof and suitable for use in the shower or while taking a

bath, but do not leave it submerged in water (max. 1 m) or under

running water for more than 30minutes.

Only use the facial brush as described in this user manual. Any

other use is considered improper and may result in damage to

property or persons. The manufacturer or vendor cannot be

held liable for damages or injury incurred through improper or

incorrect use.

3.2 Safety instructions

WARNING! RISK OF ELECTRIC SHOCK!

• Only connect the facial brush if the line

voltage of the socket corresponds to the data

on the rating plate of the USB wall adapter.

• Only connect the USB wall adapter to an

easily accessible socket so that you can

quickly disconnect it from the mains supply

in the event of a problem.

• Only use the facial brush with the supplied

USB cable and USB wall adapter.

• The supplied USB cable and USB wall

adapter can only be connected to the facial

brush. Do not use for other purposes.

• Do not use the facial brush, USB cable or

USB wall adapter if they are damaged or

defective. The manufacturer or customer

8

EN

service must replace the damaged or

defective parts to avoid risks.

• Do not open the housing; instead, have

a qualiﬁed professional perform repairs.

Contact the customer service team for this.

Liability and warranty claims are waived

in the event of repairs performed by the

user, improper connection or incorrect

operation.

• Only parts that comply with the original

device data may be used for repairs.

This facial brush contains electrical and

mechanical parts which are essential for

providing protection against sources of

danger.

• Do not use the facial brush while charging.

• Do not immerse the USB cable or USB wall

adapter in water or other liquids.

• Keep the USB cable and USB wall adapter

away from water. They are not waterproof.

• Do not leave the facial brush submerged in

water (max. 1 m) or under running water

for more than 30 minutes.

• Always switch the facial brush o when you

are not using it, when you intend to clean

it, or in the event of a malfunction. Always

unplug the USB cable and USB wall adapter

when you are not charging the facial brush.

9

EN • Never touch the USB cable and USB wall

adapter with wet or damp hands.

• Never insert any objects into the housing.

• Do not pull the USB wall adapter out of the

socket by the USB cable; instead, always pull

it out by the adapter itself. Never move,

pull, or carry the facial brush by the USB

cable.

• Keep the facial brush, USB cable and USB

wall adapter away from open ﬂames and

hot surfaces.

• Lay the USB cable so that it does not pose a

tripping hazard.

• Do not kink the USB cable or wrap it

around the facial brush. Do not lay the USB

cable over sharp edges.

• Only use the facial brush indoors.

WARNING! DANGER FOR CHILDREN

AND PERSONS WITH IMPAIRED

PHYSICAL, SENSORY OR MENTAL

CAPACITIES, OR LACK OF

EXPERIENCE AND KNOWLEDGE.

• The facial brush can be used by children aged

from 8 years and above and persons with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge if they

have been given supervision or instruction

concerning use of the facial brush in a safe way

10

EN

and understand the hazards involved. Children

must not play with the facial brush. Cleaning

and user maintenance must not be performed

by unsupervised children.

• Keep children under the age of 8 away

from the facial brush, USB cable, USB wall

adapter and travel case.

• Make sure that children do not play with the

plastic wrapping. They may get caught in it

when playing and suocate.

WARNING! RISK OF INJURY!

• Do not use the facial brush on the eye

lid, inside the eye orbit, around areas that

contain inﬂammatory acne, or areas that

have rashes or wounds.

• Stop using the facial brush immediately

if you feel any discomfort or develop

any abnormal reactions such as itching,

uncomfortable inﬂammation, or scratches.

• Do not focus the facial brush on one spot

on your skin and do not use the facial brush

more than 2 minutes at a time.

• Never leave the facial brush unattended

while it is in operation.

• Consult your doctor before using the facial

brush if:

• you suer from allergies, skin irritation or

skin diseases.

11

EN • you are pregnant.

• you are using a pacemaker.

• you are not sure whether the facial brush

is suitable for you.

NOTICE! RISK OF DAMAGE!

• Do not use clay-based, silicone-based or

grainy cleansers, exfoliators or scrubs with

the facial brush as they may damage the soft

silicone touch-points of the facial brush.

• Avoid leaving the facial brush in direct

sunlight and never expose it to extreme

heat or boiling water.

• Do not place the facial brush on the edge of

a surface to avoid dropping.

• Never ﬁll the housing of the facial brush

with liquid.

• Clean the facial brush after each use to

avoid the accumulation of grease and

residues of face wash products.

• Stop using the facial brush if its plastic

parts exhibit cracks or breaks or are

deformed. Only replace damaged parts with

corresponding original spare parts.

• Do not operate the facial brush if it has

been dropped or is damaged in any way.

Have the facial brush checked and/or

repaired by qualiﬁed technicians if necessary.

12

EN

4 Checking the facial brush and package

contents

NOTICE! RISK OF DAMAGE!

• If you are not cautious when opening the

packaging with a sharp knife or other pointed

objects, you may quickly damage the facial

brush. Be very careful when opening it.

1. Take the facial brush out of the packaging.

2. Check to make sure that all parts are included (see Fig. A or B).

3. Check whether the facial brush or individual parts are damaged.

If this is the case, do not use the facial brush. Contact our

customer service.

5 Charging

WARNING! RISK OF INJURY!

• Do not charge when the facial brush is in

use or if it is wet. Make sure it is dry before

charging.

• Only charge the facial brush with the

supplied USB cable and USB wall adapter.

• Only charge the facial brush at

temperatures between 0 and 40 °C.

• Always unplug the facial brush after charging

has been completed.

• Fully charge the facial brush before ﬁrst use and when

the battery power is low.

• When the battery power is low, the LED light

becomes red and starts to blink. Recharge the facial

brush.

• The facial brush cannot be used during charging.

13

EN 1. Plug the smaller end of the USB cable 9 into the charging

port 8.

2. Plug the larger end of the USB cable into the USB port of the

USB wall adapter 10 .

You may also plug the USB cable to a compatible USB power

source (e.g. USB port of a computer) for charging.

3. Plug the USB wall adapter into a mains socket for charging.

During charging, the LED light 3 will become red and start

to blink.

4. The LED light will become solid white when it is fully charged.

Unplug the USB wall adapter from the mains socket and

disconnect the USB cable from the facial brush.

6 Operation

• Clean the facial brush before ﬁrst use as described in

the chapter “Cleaning”.

• Before cleansing an area of the face for the ﬁrst time,

perform a skin sensitivity test on a spot. Start your

treatment only if there is no adverse reaction.

• The LED light 3 is solid white during operation and

ﬂashes once whenever a button is pressed.

6.1 Using dierent areas of the facial brush

Area Best for

Cleansing area

(thicker studs) 1

Precise cleansing and removal of dead skin

cells and horny layers.

Cleansing area

(thinner studs) 2

Gentle cleansing of large areas such as

cheeks.

Massaging area

(ridges) 4

Massaging the skin for improved blood

circulation and promoting the absorption of

skin care products.

6.2 Operation modes and speed settings

The facial brush is equipped with a vibrating and a pulsating mode.

• The vibrating mode uses uniform vibrations for deep, gentle

cleansing.

• The pulsating mode uses alternating strong and weak

vibrations for a massage-like soothing eect.

14

EN

• The “Bright” version has 7 speed settings for each mode. The

“Bright Mini” version has 2 speed settings for each mode.

6.3 Using the “Bright” version

Switching on/o and selecting an operation mode

1. Press the control button ( ) 6 once. The facial brush is now

switched on and in the vibrating mode.

You will hear one beep sound when the facial brush is

switched on.

2. Press the control button ( ) again. The facial brush is now in

the pulsating mode.

3. Press the control button ( ) a third time to switch o the

facial brush.

You will hear two beep sounds when the facial brush is

switched o.

Selecting a speed setting

1. Select an operation mode (see chapter “Switching on/o and

selecting an operation mode”).

2. Press the increase button ( ) 5 or decrease button ( ) 7

in the selected operation mode to select a speed setting (1–7).

The default level is 4.

6.4 Using the “Bright Mini” version

1. Press the control button ( ) 6 once. The facial brush is now

switched on and in the vibrating mode at a low speed.

You will hear one beep sound when the facial brush is

switched on.

2. Press the control button ( ) again. The facial brush is now in

the vibrating mode at a high speed.

3. Press the control button ( ) a third time. The facial brush is

now in the pulsating mode at a low speed.

4. Press the control button ( ) a fourth time. The facial brush is

now in the pulsating mode at a high speed.

5. Press the control button ( ) a ﬁfth time to switch o the facial

brush.

You will hear two beep sounds when the facial brush is

switched o.

15

EN 6.5 Starting and ending the treatment

• You may start your treatment after selecting an operation

mode and a speed setting.

• Once the facial brush starts, you will hear a beep sound every

30 seconds, hinting you about the time that has passed. The

facial brush will automatically switch o after 2minutes. Please

note that whenever you change the operation mode or speed

setting during treatment, the timer will be reset to zero.

• You can also end the treatment anytime by pressing the

control button ( ) 6. You may have to press the button

more than once, depending on the product version and

current operation mode.

7 Treatment steps

1. Make sure the facial brush has enough battery power before

use (see chapter “Charging”).

2. Dampen your face and the facial brush with lukewarm water.

Apply your regular face wash product on the face (see step 1

in Fig. C).

3. Turn on the facial brush, select the vibrating mode and a speed

setting (see chapter “Operation”).

4. Cleanse the face by moving the cleansing area ( 1 or 2) over

the face in circular movements. Use the area with thicker studs

for areas that need precise cleansing (e.g. around the nose, eyes

and chin) and use the area with thinner studs for the larger

areas (e.g. forehead, cheeks and neck) (see step 2 in Fig. C).

The facial brush will automatically switch o after 2 minutes.

5. Thoroughly rinse the face and facial brush with water and then

wipe them dry with a clean, dry towel (see step 3 in Fig. C).

6. Apply your serum or day/night cream on the face.

7. Turn on the facial brush and select the pulsating mode and a

speed setting (see chapter “Operation”).

8. Massage the face by moving the massaging area 4 over the

face in circular movementsto stimulate blood circulation and

promote the absorption of your skin care product (see step4

in Fig. C). The facial brush will automatically switch o after

2 minutes. If you want to end the treatment earlier, press the

control button ( ) 6. You may have to press the button

more than once, depending on the product version and

current operation mode.

16

EN

9. Thoroughly clean the facial brush after use (see chapter

“Cleaning”).

• You can divide the skin into 6 areas: forehead,

nose, chin, left cheek, right cheek and neck. We

recommend you not to treat each area for more than

20 seconds.

• This facial brush is designed to cleanse your skin in just

2 minutes. We recommend you not to exceed this

time.

• Do not use this facial brush more than twice a day as

this can irritate the skin and cause redness.

8 Cleaning

WARNING! RISK OF INJURY!

• Always unplug the facial brush before

cleaning.

NOTICE! RISK OF DAMAGE!

• Do not leave the facial brush submerged in

water (max. 1 m) or under running water

for more than 30 minutes. Make sure that

no water or other liquids penetrate the

housing.

• Do not use any aggressive cleaners, brushes

with metal or nylon bristles, or sharp or

metallic cleaning utensils such as knives, hard

scrapers and the like.

Always clean the facial brush after each use.

1. Wash the facial brush with lukewarm water and soap.

2. Thoroughly rinse it with water.

3. Wipe it dry with a dry cloth.

To clean the travel case 11 , use a damp cloth to wipe it

o. Then let all parts dry completely.

17

EN 9 Storage

All parts must be completely dry before being stored.

• Store all parts in a clean and dry place, avoiding heat and direct

sunlight.

• Store the facial brush in the travel case 11 when traveling to

avoid damage.

10 Troubleshooting

Some problems may be caused by minor faults that you can ﬁx

yourself. To do so, follow the instructions in the following table.

If it is still not possible to resolve the problem, contact customer

service. Do not repair the facial brush yourself.

Fault Possible cause and solution

The facial brush

does not start. Make sure the facial brush is properly

charged.

The facial brush

does not charge. Make sure the USB cable is securely connected

between the facial brush and USB wall

adapter, and the USB wall adapter is properly

connected to a mains socket.

11 Technical data

Facial brush (Bright & Bright Mini)

Model: ND-FC04 (Bright)

ND-FC05 (Bright Mini)

Rated voltage: 5 V

Rated power: 3 W

Battery capacity: 500 mAh (Bright)

300 mAh (Bright Mini)

IP code: IPX7 (protected against water

immersion for up to 30minutes

at a depth of 1 m)

Protection class: III

Speed settings: 7 (Bright)

2 (Bright Mini)

Modes: Vibrating and pulsating

18

EN

Material: ABS and silicone

Weight: 100 g (Bright)

55 g (Bright Mini)

Dimensions (L × W × H): 110 × 35 × 70 mm (Bright)

73 × 31 × 46 mm (Bright Mini)

USB wall adapter

Power input: 100–240 V~ 50/60 Hz, 0.25 A

Power output: 5 V 0.5 A

Protection class: II

Model number: PS06H050K0500EU (EU)

PS06H050K0500BU (GB)

12 Disposal

12.1 Disposing of the packaging

Sort the packaging before you dispose of it.

Dispose of paperboard and cardboard with the

recycled paper service and wrappings with the

appropriate collection service.

12.2 Disposing of the facial brush

(Applicable in the European Union and other European countries

with separate collection systems of recyclable materials)

Old appliances may not be disposed of in the

household waste!

Should the facial brush no longer be capable of being

used at some point in time, dispose of it in

accordance with the regulations in force in

your city or county. This ensures that old

appliances are recycled in a professional manner and

also rules out negative consequences for the environment. For this

reason, electrical equipment is marked with the symbol shown here.

19

EN Batteries and rechargeable batteries may not be

disposed of with household waste!

As the end user you are required by law to bring all

batteries and rechargeable batteries, regardless

whether they contain harmful substances* or not, to a

collection point run by the communal authority or to

a retailer, so that they can be disposed of in an

environmentally friendly manner.

Bring the entire product (including the rechargeable battery) to

your collection point and make sure that it is in an uncharged

state!

* labelled with: Cd = cadmium, Hg = mercury, Pb = lead

Note: To remove the rechargeable battery, remove the rating

label and the screws at the bottom of the facial brush and remove

the bottom cover. Then wrap a towel around the facial brush and

use a hammer to smash the housing. Make sure your eyes and

hands are protected to avoid injury. Please note, the removal of

the rechargeable battery is not reversible.

13 Warranty

This product is covered by a 2-year warranty according to

European regulations and law. The extent of the warranty on this

product is limited to technical defects caused by faulty production

processes. In the event you want to claim warranty please be

sure to contact our customer service for instructions. They may

be able to solve your problem without needing to return the

product to the store or our service center. Our customer service

is always pleased to help you!

14 Customer service

For more information about the products of Silk’n visit your

regional Silk’n website: www.silkn.eu. If the device is damaged,

defective, in need of repair or you need our assistance, please

contact your nearest Silk’n service center. This manual is also

available as a PDF download from: www.silkn.eu.

Service number: 0906-2130009

Email: customercareuk@silkn.eu

20

DE

Rechtlicher Hinweis

Home Skinovations Ltd. behält sich das Recht vor, Änderungen

an seinen Produkten oder Speziﬁkationen zur Verbesserung von

Leistung, Betriebssicherheit oder Herstellbarkeit vorzunehmen.

Durch Home Skinovations Ltd. bereitgestellte Informationen

werden zum Zeitpunkt der Veröentlichung als korrekt und

verlässlich angesehen. Die Home Skinovations Ltd. übernimmt

allerdings keine Verantwortung für deren Verwendung. Es wird

weder stillschweigend noch unter einem Patent oder unter

Patentrechten der Home Skinovations Ltd. eine Lizenz eingeräumt.

Kein Teil dieses Dokuments darf in irgendeiner Form oder mit

elektronischen oder mechanischen Mitteln für irgendwelche

Zwecke ohne ausdrückliche schriftliche Genehmigung der Home

Skinovations Ltd. reproduziert oder übertragen werden.

Änderungen der Daten ohne Vorankündigung sind vorbehalten.

Die Home Skinovations Ltd. verfügt über Patente sowie anhän-

gige Patentanmeldungen, Handelsmarken, Urheberrechte oder

sonstige Rechte geistigen Eigentums, welche Gegenstand dieses

Dokumentes sind. Die Bereitstellung dieses Dokumentes gibt Ihnen

keinerlei Lizenz für diese Patente, Handelsmarken, Urheberrechte

oder sonstigen Rechte geistigen Eigentums, sofern dies nicht

ausdrücklich in einer schriftlichen Vereinbarung von Home

Skinovations Ltd. geregelt ist. Änderung der technischen Daten

ohne Vorankündigung vorbehalten.

Silk’n und das Silk’n-Logo sind eingetragene Warenzeichen der

Home Skinovations Ltd.

Invention Works B.V.

Donk 1B, 2991 LE Barendrecht, Die Niederlande

www.silkn.eu - inf[email protected]

La pagina si sta caricando...

Silkn BRIGHT ANSIKTSBØRSTE, LILLA Manuale utente

Silkn BRIGHT ANSIKTSBØRSTE, LILLA Manuale utente

in altre lingue

Documenti correlati

Altri documenti