Extreme Networks AP3000 Guida di riferimento
- Tipo
- Guida di riferimento
ExtremeWireless 802.11ax Wi-Fi 6E AP3000
Indoor Access Point
AP3000 Overview
The AP3000 access point is an indoor model 802.11ax Wi-Fi 6E access
point. The AP3000 comes with internal antennas, built-in dual-band
radios, two band-locked radios, four dual-band WiFi internal
antennas, and one Thread®; Zigbee®; Bluetooth® Low Energy (BLE®)
antenna.
The AP3000 can be mounted on a flat surface such as a wall, solid flat
ceiling, to a junction box or a gang box, and can be installed on a
suspended ceiling or a drop ceiling.
The AP3000 access point has the following features:
• Radios:
– Two 802.11ax radios (2X2 2.4GHz, 2X2 6 GHz radio, and 2X2 5
GHz radio)
– One IoT Radio (2.4 GHz)
• Console port: Micro USB
• Two Ethernet ports (ETH0 and ETH1)
– ETH0: 2500/1000/100 Mbps auto-negotiation Ethernet port,
RJ45, Power over Ethernet (PoE) at 802.3at
– ETH1: 1000/100/10 Mbps, RJ45
• One bi-color status light
• One reset button
• One Kensington lock
• One USB 2.0 type A connector
• Power: PoE 802.3af and 802.3at (see Table 1 for details)
• Antennas: Four Wi-Fi internal antennas and one Thread®; Zigbee®;
Bluetooth® 5.3 Low Energy; IEEE 802.15.4
• Operating temperature: 0°C to +50°C (32°F to +122°F)
• Storage temperature -40°C to +70°C (-40°F to +158°F)
• Relative humidity: 0% to 95% non-condensing
Table 1 AP3000 Power source
Figure 1 Top view of AP3000
Figure 2 AP3000 access point hardware components
Power source Description
Power over Ethernet
(PoE)
Power is provided through the 2.5G Ethernet
port of AP3000, compliant to be powered with
802.3af to provide full functionality without
USB. To enable USB, use 802.3at.
External 12V DC power
supply (optional; ordering
part #37215- PWR 12VDC/
2A, 2.5mm x 5.5mm
connector)
Power is provided through an external DC
power supply plugged into an AC source.
Table 2 Side ports on the AP3000 access point
Status LED Activity Description
The access point has one status light on top of the chassis. The status
light conveys operational states for system power, firmware updates,
Ethernet and wireless interface activity, and major alarms.
IQ Engine Status LED Activity
• Dark: Power is off.
• Solid white: The device power is on and the access point is ready to
use. The device has successfully established a Control And
Provisioning of Wireless Access Points (CAPWAP) connection to
ExtremeCloud IQ and is operating normally.
• Slow-blinking white: The device has a CAPWAP connection to
ExtremeCloud IQ, but is operating on 802.3af power instead of
802.3at power.
• Solid amber: The device power is on and the access point is in boot
up mode, or is running without a CAPWAP connection.
• Slow-blinking amber: The device has no CAPWAP connection to
ExtremeCloud IQ, and is operating on 802.3af power instead of
802.3at power.
• Fast-blinking amber: The device is updating its IQ Engine firmware.
ExtremeCloud IQ Controller Status LED Activity
• Dark: Power is off or the LED has been turned off.
• Solid white: The device is booting or already taken over by the
controller.
• Slow-blinking white: The device is in the process of being taken
over by the controller or has failed to be taken over by the
controller.
• Flashing fading white: Configuration pushes down to access point
from controller helping an user to locate the access point location
using visual inspection.
• Solid amber: The access point is upgrading its firmware.
• Fast-blinking amber: The access point is acquiring DHCP IP
Micro USB Console Ports
Through the console port, you can make a serial connection between
your management system and the access point. Use the SKU ACC-
WIFI-MICRO-USB when you order the Micro USB cable.
AP3000 Box Contents
Ensure that the following items shipped with your access point.
All optional brackets and accessories are sold separately. For detailed
installation instructions about all mounting procedures, refer to the
ExtremeWireless Access Point AP3000 Installation Guide in the
Extreme Networks Documentation Support site.
Callout Description
1 ETH0/PoE+
2 ETH1
3 12VDC
4 Console port
5 USB port
6 Reset button
7 Kensington security slot
Note: The best practice is to use the Extreme Networks micro USB
cable (part number ACC-WIFI-MICRO-USB). When you connect to
the device using the micro USB Console port, the management
station from which you connect to the device must have a VT100
emulation program, such as TeraTerm Pro (a free terminal emulator)
or Hilgraeve HyperTerminal. Set your baud rate to 115200.
Table 3 Contents of the AP3000 Box
Quantity Item
1 AP3000 access point
1 AP3000 Quick Reference
1 AH-ACC-BKT-AX-TB mounting bracket
2 Phillips pan head wood screws
2 Screw-in anchors
Install the Access Point
Use these instructions as guidelines for mounting and connecting the
AP3000 access point easily and safely. The AP3000 comes with the
AH-ACC-BKT-AX-TB mounting bracket that can be used to mount the
access point on flat surfaces such as solid flat ceilings or wood walls.
Install the Access Point on a Wall or a Flat Ceiling
Use the AH-ACC-BKT-AX-TB mounting bracket for flat surface wall or
solid ceiling installation.
Pre-installation checklist:
The following hardware is required for installing the AH-ACC-BKT-AX-
TB accessory on a wall or a solid ceiling:
• An AP3000 access point
• One AH-ACC-BKT-AX-TB mounting bracket. The bracket can be
used with 15/16-inch T-bar.
• Two M3.5 pan head wood screws and two screw-in anchors
Follow these steps when you install the access point on a wall or solid
ceiling
1 Using the AH-ACC-BKT-AX-TB mounting bracket as a template,
mark and drill two mounting holes.
2 Attach the bracket to the wall using two M3.5 pan head wood
screws.
Use push-in anchors or screw-in anchors for drywall or plastic
board installations on vertical walls.
3 Attach the access point to the bracket by aligning the red dot on
the bracket and the access point.
4 Press and rotate the access point 1/8 turn clockwise until it clicks
into place on the accessory.
5 Attach the Cat5e RJ45 cable to the ETH0 port on the access point.
Install the Access Point on a Non-Standard Ceiling
Grid or a Wall
For non-standard ceiling grid installation or wall installation
instructions, refer to the Wi-Fi 6 802.11ax Access Points Accessories
Guide. The access point can be installed on a non-standard ceiling
grid using the following accessories:
Table 4 Non-standard ceiling grid and wall accessories
information
Electrical Hazard: Only qualified personnel should perform
installation procedures.
Note: The mounting procedures for installing the access point to
non-standard ceilings are covered in the ExtremeWireless Access
Point AP3000 Installation Guide.
Note: The wood screws and screw-in anchors come in a separate
plastic bag.
Note: Screw-in anchors must be used for ceiling installations.
Note: For wall installation, the ‘E’ logo must be on the left side of the
access point as shown in Figure 1.
Bracket part number Description
AH-ACC-BKT-AX-TB
Mounting bracket for Prelude ceilings (15/16
in. ceiling grid), Suprafine ceilings (9/16 in.
ceiling grid), and walls. The ceiling tile sides
must be flat
AH-ACC-BKT-AX-IL Mounting bracket for Interlude (9/16 wide T-
bar with protrusion) ceilings
AH-ACC-BKT-AX-SL Mounting bracket for Silhouette ceilings (ceiling
grid with 1/8 in. or 1/4 in. bottom opening)
ACC-BKT-AX-JB Junction box or wall mounting for indoor
access points
ACC-BKT-AX-BEAM Beam mounting for indoor access points
AH-ACC-BKT-AX-WL Mounting bracket for direct-to-wall installations
when a 1.25 inches of space is desired between
the wall and the access point
Lock the Access Point after Installation (Optional)
Use the Kensington lock on the side of the access point to secure the
AP. The lock prevents someone from removing the AP from the
mounting accessory.
Connect a Power Supply
If you need to power the AP3000 access point with an external 12V
DC power supply, you can plug the power cord into the power
connector on the back of the access point by the RJ-45 connector
(see Table 2).
There is no wall mount for the 12V DC power supply. The power LED
on the front face of the access point is lit when the power supply is
connected. For information about optional power supplies, refer to
the ExtremeWireless Access Point AP3000 Installation Guide.
Professional Installation Instruction
Installation personnel
This product is designed for specific application and needs to be
installed by a qualified personnel who has RF and related rule
knowledge. The general user shall not attempt to install or change
the setting.
Installation procedure
Refer to the ExtremeWireless Access Point AP3000 Installation Guide.
Instructions d'installation professionnelle
Installation
Ce produit est destine a un usage specifique et doit etre installe par
un personnel qualifie maitrisant les radiofrequences et les regles s'y
rapportant. L'installation et les reglages ne doivent pas etre modifies
par l'utilisateur final.
Procedure d'installation
Consulter le manuel d'utilisation ExtremeWireless Access Point AP3000
Installation Guide.
Regulatory and Compliance Information
Safety Guidelines
This section contains notices that are intended to protect your personal safety
and to prevent damage to the equipment.
Qualified Personnel:
Federal Communications Commission (FCC) Notice
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: The default bracket for wall installation is the ACC-BKT-AX-TB
bracket. Order the -TB bracket for new wall installations.
Warning: Select the installation position and ensure that the final
output power does not exceed the limit set forth in relevant rules. The
violation of the rule could lead to serious federal penalty.
Warning: Avertissement: Choisir avec soin la position d'installation
et s'assurer que la puissance de sortie ne depasse pas les limites en
vigueur. La violation de cette regle peut conduire a de serieuses
penalites federales.
Electrical Hazard: Only qualified personnel should perform installation
procedures. Within the context of the safety notes in this documentation,
qualified persons are defined as persons who are authorized to commission,
ground and label devices, systems, and circuits in accordance with established
safety practices and standards. A qualified person understands the
requirements and risks involved with installing outdoor electrical equipment in
accordance with national codes.
ExtremeWirelessTM
Indoor Access Point
Quick Reference
AP3000
Scan to Download the
ExtremeCloud IQ Companion Mobile Application
Commission, monitor, and troubleshoot devices easily with ExtremeCloud IQ
Companion Mobile Application (supported on iOS and Android).
Use your mobile device camera to scan the serial number, capture installation
images, assign or change device location, and network policy. The
ExtremeCloud IQ Companion Mobile Application enables you to access the
device CLI for troubleshooting and view device and client status.
ExtremeCloud IQ Companion ExtremeCloud IQ Companion
iOS Mobile Application Android Mobile Application
Scan for Product Support Details
ExtremeCloud IQ Companion Documentation
Mobile Application Onboarding
Notice
Copyright © 2023 Extreme Networks, Inc. All Rights Reserved.
Legal Notices
Extreme Networks, Inc. reserves the right to make changes in specifications
and other information contained in this document and its website without
prior notice. The reader should in all cases consult representatives of Extreme
Networks to determine whether any such changes have been made.
The hardware, firmware, software or any specifications described or referred
to in this document are subject to change without notice.
Trademarks
Extreme Networks and the Extreme Networks logo are trademarks or
registered trademarks of Extreme Networks, Inc. in the United States and/or
other countries.
All other names (including any product names) mentioned in this document
are the property of their respective owners and may be trademarks or
registered trademarks of their respective companies/owners.
For additional information on Extreme Networks trademarks, please see:
www.extremenetworks.com/company/legal/trademarks/
Documentation, Installation Videos, and Support
For product support, including Documentation and Installation Videos, visit:
www.extremenetworks.com/documentation
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Operation in the band 5925-7125 MHz subject to, (1) FCC regulations restrict
the operation of this device to indoor use only, (2) the operation of this device
is prohibited on oil platforms, cars, trains, boats, and aircraft, except that
operation of this device is permitted in large aircraft while flying above 10,000
feet, and (3) operation of transmitters in the 5.925 GHz - 7.125 GHz band is
prohibited for control of or communications with unmanned aircraft systems.
Conformitè Europëenne (CE) Information
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz
frequency range.
Selling Countries:
CE Marking and European Area (EEA)
Other Countries
Brazil
Este produto está homologado pela ANATEL, de acordo com os procedimentos
regulamentados pela Resolução n°. 242/2000 e atende aos requisitos técnicos
aplicados.
Este equipamento não tem direito à proteção contra interferência prejudicial e não
pode causar interferência em sistemas devidamente autorizados. Para maiores in-
formações, consulte o site da ANATEL – www.anatel.gov.br
Mexico Compliance Statement
La operacion de este equipo esta sujeta a las siguientes dos condiciones
1 es posible que este equipo o dispositivo no cause interferencia perjudicial y
2 este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que
pueda causar su operacion no deseada.
The operation of this equipment is subject to the following two conditions:
1 It is possible that this equipment or device does not cause disruptive interference
and
2 This equipment or device must accept any interference, including interference
that may cause undesired operation.
Extreme Networks EU Importer Address
Extreme Networks, Ireland Ops Ltd.
Rineanna House Shannon Industrial Estate
Shannon, V14CA36 Ireland
Extreme Networks, UK Ltd.
250 Longwater Avenue Green Park
1st Floor
Reading, UK
UK Statement and CE Statement
This equipment complies with the UK and EEA radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and operated
with minimum distance of 20 cm between the radiator and your body.
The frequency and the maximum transmitted power in the UK and European
Conformity are listed below:
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
Warning: FCC Radiation Exposure Statement: This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 47 cm
between the radiator and your body.
Warning: CE co-location MPE Statement: This equipment complies with CE
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK
(NI)
Warning: This is a Class B product. In a domestic environment, this product
may cause radio interference in which case the user may be required to take
adequate measures.
CE UK
2400-2483.5 MHz: 19.98 dBm 2400-2483.5 MHz: 19.98 dBm
2400-2483.5 MHz (802.15.4):
8.03dBm 2400-2483.5 MHz (802.15.4):
8.03 dBm
2400-2483.5 MHz (BLE®): 8.0 dBm 2400-2483.5 MHz (BLE®): 8.0 dBm
5150-5725 MHz: 29.96 dBm 5150-5725 MHz: 29.96 dBm
5725-5850 MHz: 13.97 dBm 5720-5850 MHz: 29.97 dBm
5945-6425 MHz: 22.99 dBm 5945-6425 MHz: 22.99 dBm
CE - The device is restricted to indoor use only when operating in the 5945 to 6425
MHz frequency range.
UK - The device is restricted to indoor use only when operating in the 5945 to 6425
MHz frequency range.
Hereby, Extreme Networks declares that the radio equipment AP3000-WW is in
compliance with Radio Equipment Regulations 2017.
Operation on oil platforms, cars, trains, boats, and aircraft shall be prohibited
except for on large aircraft flying above 10,000 ft.
For full text of the UK Declaration of Conformity, please contact Extreme
Regulatory Compliance at compliancerequest@extremenetworks.com.
Industry Canada Notice
This device contains license-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada's license-exempt RSS(s).
Operation in the band 5925 to 7125 MHz subject to the following two conditions: (1)
IC regulations restrict the operation of this device to indoor use only, and (2) the
operation of this device is prohibited on oil platforms, cars, trains, boats, and
aircraft, except that operation of this device is permitted in large aircraft while
flying above 10,000 feet.
Cet appareil contient un ou des émetteurs/récepteurs exempts de licence
conformes aux RSS exempts de licence d'Innovation, Sciences et Développement
économique Canada.
Fonctionnement dans la bande 5925 à 7125 MHz sous réserve des deux conditions
suivantes: (1) Les réglementations de la IC limitent le fonctionnement de cet
appareil à une utilisation en intérieur uniquement, et (2) le fonctionnement de cet
appareil est interdit sur les plates-formes pétrolières, les voitures, les trains, les
bateaux et les avions, sauf que le fonctionnement de cet appareil est autorisé dans
de grandes avion en vol au-dessus de 10 000 pieds..
RSS-247 (6.4)
Where applicable, antenna types, antenna models, and worst-case tilt angles
necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth
in section 6.2.2.3 shall be clearly indicated.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
1 This device may not cause interference.
2 This device must accept any interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de license contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de license. L’exploitation est autorisée aux
deux conditions suivantes :
1 L’appareil ne doit pas produire de brouillage;
2L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Taiwan Regulatory Statement
請至此連結閱讀中文說明: https://www.extremenetworks.com/support/
documentation/.
European Waste Electrical and Electronic Equipment
(WEEE) Notice
In accordance with Directive 2012/19/EU of the European Parliament on waste
electrical and electronic equipment (WEEE):
1 The symbol above indicates that separate collection of electrical and electronic
equipment is required.
2 When this product has reached the end of its serviceable life, it cannot be
disposed of as unsorted municipal waste. It must be collected and treated
separately.
Caution: The device for operation in the band 5150-5250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems.
Caution: Avertissement: les dispositifs fonctionnant dans la bande 5150-
5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de
réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
Caution: This equipment complies with IC RSS-102 radiation exposure limits
set forth for an uncontrolled environment. This equipment must be installed
and operated with minimum distance 28 cm between the radiator and your
body.
Caution: Avertissement:Cet équipement est conforme aux limites
d’exposition aux rayonnements IC établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 28cm
de distance entre la source de rayonnement et votre corps.
3 It has been determined by the European Parliament that there are potential negative
effects on the environment and human health as a result of the presence of hazardous
substances in electrical and electronic equipment.
4 It is the users’ responsibility to utilize the available collection system to ensure WEEE
is properly treated. For information about the available collection system, please
contact Extreme Environmental Compliance at Gre[email protected].
Supplement to Product Instructions
Declaration of Conformity in Languages of the European
Community
English Hereby, Extreme Networks, declares that the radio equipment type (AP3000-
WW) is in compliance with Directive 2014/53/EU. For full text of the EU
Declaration of Conformity, please contact Extreme Regulatory Compliance at
compliancerequest@extremenetworks.com
Finnish Täten Extreme Networks vakuuttaa, että Radio laite tyyppi (AP3000-WW) on
direktiivin 2014/53/EU mukainen.EU vaatimustenmukaisuusvakuutuksen
täydellisestä tekstistä ota yhteyttä äärimmäisiin viranomais säädöksiin
osoitteessa compliancerequest@extremenetworks.com
Dutch Extreme Networks verklaart hierbij dat het type radioapparatuur (AP3000-WW)
in overeenstemming is met richtlijn 2014/53/EU.Voor de volledige tekst van de
EU-conformiteitsverklaring u contact opnemen met extreme regelgeving op
compliancerequest@extremenetworks.com
French Par la présente, Extreme Networks déclare que le type d'équipement radio
(AP3000-WW) est conforme à la directive 2014/53/UE.Pour le texte intégral de
la Déclaration de conformité de l'UE, veuillez communiquer avec Extreme
Regulatory Compliance à compliancerequest@extremenetworks.com
Swedish Härmed intygar Extreme Networks att radioutrustning typ (AP3000-WW)
överensstämmer med direktiv 2014/53/EU.För fullständig text av EU-försäkran
om överensstämmelse, vänligen kontakta Extreme regelefterlevnad på
compliancerequest@extremenetworks.com
Danish Herved erklærer Extreme Networks, at radioudstyrs typen (AP3000-WW) er i
overensstemmelse med direktiv 2014/53/EU.For den fulde ordlyd af EU-
overensstemmelseserklæringen bedes du kontakte Extreme Regulatory
Compliance på compliancerequest@extremenetworks.com
German Dabei erklärt Extreme Networks, dass der Funkgerätetyp (AP3000-WW) mit
der Richtlinie 2014/53/EU im Einklang steht.Für den vollständigen Wortlaut der
EU-Konformitätserklärung wenden Sie sich bitte an extreme Regulatory
Compliance unter compliancerequest@extremenetworks.com
Greek Με την παρούσα, ακραία δίκτυα δηλώνουν ότι ο τύπος του ραδιοεξοπλισμού
(AP3000-WW) συμμορφώνεται με την οδηγία 2014/53/ΕΕ.Για το πλήρες
κείμενο της δήλωσης συμμόρφωσης ΕΕ, παρακαλούμε επικοινωνήστε με
την ακραία κανονιστική συμμόρφωση στο
compliancerequest@extremenetworks.com
Icelandic Hérlendis, Extreme Networks, lýsa því yfir að útvarpsbúnaðargerðin (AP3000-
WW) sé í samræmi við tilskipun 2014/53/ESB.Fyrir fullan texta í ESB yfirlýsingu
um samræmi, vinsamlegast hafðu samband við Extreme Reglufylgni á
compliancerequest@extremenetworks.com
Italian Di conseguenza, Extreme Networks dichiara che il tipo di apparecchiature radio
(AP3000-WW) è conforme alla direttiva 2014/53/EU.Per il testo integrale della
Dichiarazione di conformità dell'UE, contattare Extreme Regulatory Compliance
presso compliancerequest@extremenetworks.com
Spanish Por la presente, Extreme Networks declara que el tipo de equipo radioeléctrico
(AP3000-WW) cumple con la Directiva 2014/53/UE.Para obtener el texto
completo de la Declaración de conformidad de la UE, póngase en contacto con
Extreme Regulatory Compliance en compliancerequest@extremenetworks.com
Portuguese Por este meio, a Extreme Networks declara que o tipo de equipamento de rádio
(AP3000-WW) está em conformidade com a Diretiva 2014/53/UE.Para obter o
texto integral da Declaração de Conformidade da UE, contacte o cumprimento
regulamentar extremo em compliancerequest@extremenetworks.com
Malti B ' dan, netwerks estremi, jiddikjara li t-tip ta ' tagħmir tar-radju (AP3000-WW)
huwa konformi mad-Direttiva 2014/53/UE.Għat-test sħiħ tad-dikjarazzjoni ta '
konformità tal-UE, jekk jogħġbok ikkuntattja lill-konformità regolatorja
compliancerequest@extremenetworks.com
P/N 9037459-00 Rev AC
-
1
-
2
