IKEA BEMOTA Wall Mounted Extractor Hood Manuale utente

GB

DE

FR

IT

BEMOTA

ENGLISH 4

DEUTSCH 17

FRANÇAIS 30

ITALIANO 49

2

1345

Please refer to the last page

of this manual for the full list

of IKEA appointed Authorized

Service Centre and relative

national phone number

2

1345

2

1345

Consultare l’ultima pagina

di questo manuale dove è

riportato l’elenco completo

dei Centri Assistenza IKEA

Autorizzati con i relativi numeri

telefonici nazionali.

2

1345

Consultez la dernière page

de ce manuel contenant la

liste complète des services

Après-vente agréés IKEA avec

les numéros de téléphone

nationaux correspondants.

Konsultieren Sie die letzte Seite

dieser Bedienungsanleitung,

auf der die vollständige Liste

der nationalen autorisierten

IKEA Kundendienststellen mit

den entsprechenden Telefon-

nummern aufgelistet ist.

4

ENGLISH

Contents

Safety information 4

Product description 8

Care and cleaning 9

What to do if... 11

Technical data 12

Energy efficiency 13

Environment concerns 14

IKEA GUARANTEE 14

Safety information

For your safety and correct operation of the appliance, read

this manual carefully before installation and use. Always

keep these instructions with the appliance even if you move or

sell it. Users must fully know the operation and safety features

of the appliance.

The wire connection has to be done by specialized

technician.

• The manufacturer will not be held liable for any damages

resulting from incorrect or improper installation.

• The minimum safety distance between the cooker top and

the extractor hood is: for electrical hob 500mm and for gas

hob 500mm.

• If the instructions for installation for the gas hob specify a

greater distance, this must be respected.

• Check that the mains voltage corresponds to that indicated

on the rating plate fixed to the inside of the hood.

• Means for disconnection must be incorporated in the fixed

wiring in accordance with the wiring rules.

• For Class I appliances, check that the domestic power supply

guarantees adequate earthing.

• Connect the extractor to the exhaust flue through a pipe of

minimum diameter 120 mm. The route of the flue must be

as short as possible.

• Do not connect the extractor hood to exhaust ducts carrying

combustion fumes (boilers, fireplaces, etc.).

5

ENGLISH

• If the extractor is used in conjunction with non-electrical

appliances (e.g. gas burning appliances), a sufficient degree

of aeration must be guaranteed in the room in order to

prevent the backflow of exhaust gas. When the cooker hood

is used in conjunction with appliances supplied with energy

other than electric, the negative pressure in the room must

not exceed 0,04 mbar to prevent fumes being drawn back

into the room by the cooker hood.

• The air must not be discharged into a flue that is used for

exhausting fumes from appliances burning gas or other

fuels.

• If the supply cord is damaged, it must be replaced from the

manufacturer or its service agent.

• Connect the plug to a socket complying with current

regulations, located in an accessible place.

• With regards to the technical and safety measures to be

adopted for fume discharging it is importat to closely follow

the regulations provided by the local authorities.

WARNING: Before installing the Hood, remove the

protective films.

• Use only screws and small parts in support of the hood.

WARNING: Failure to install the screws or fixing device in

accordance with these instructions may result in electrical

hazards.

• Connect the hood to the power net by using a bipolar switch

having a contact gap of at least 3 mm.

• Do not look directly at the light through optical devices

(binoculars, magnifying glasses…).

• Do not flambè under the range hood; risk of fire.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

6

ENGLISH

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

• Children should be supervised to ensure that they do not

play with the appliance.

• The appliance is not to be used by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction

Accessible parts may become hot when used with cooking

appliances.

• Clean and/or replace the Filters after the specified time

period (Fire hazard).

• There shall be adequate ventilation of the room when the

range hood is used at the same time as appliances burning

gas or other fuels (not applicable to appliances that only

discharge the air back into the room)

7

ENGLISH

Use

• Switch off or unplug the appliance

from the mains supply before carrying

out any maintenance work.

• The top of the hood must not to be

used as a shelf.

• The extractor hood has been designed

exclusively for domestic use to

eliminate kitchen smells.

• Never use the hood for purposes other

than for which it has been designed.

• Never leave high naked flames under

the hood when it is in operation.

• Adjust the flame intensity to direct

it onto the bottom of the pan only,

making sure that it does not engulf the

sides.

Deep fat fryers must be continuously

monitored during use: overheated oil can

burst into flames.

Installation modes

The hood has been designed to be

installed and used either as a “Exhaust

mode”, or as a “Recirculation mode”.

9

min 471 mm

max 861 mm

min 569 mm

max 861 mm

min 471 mm

max 861 mm

min 569 mm

max 861 mm

Exhaust mode (see symbol in

installation booklet)

Cooking steam is sucked and channelled

outside the house through a discharge

duct (not supplied), fitted to the hood

steam outlet.

Ensure that the discharge duct is correctly

fitted to the air outlet, unit using an

appropriate connection system.

9

min 471 mm

max 861 mm

min 569 mm

max 861 mm

min 471 mm

max 861 mm

min 569 mm

max 861 mm

Recirculation mode (see symbol

in installation booklet)

The air is filtered through one or more

the charcoal filters, and then resent into

room.

Important: Ensure appropriate air

circulation around the hood.

Important: If the hood is supplied

without charcoal filters and installed on

recirculation mode, these must be fitted

before the hood can be used. Filters are

available in shops.

The hood should be installed away from

particularly dirty areas, windows, doors

and heat sources.

The accessories for wall fixing are not

included because wall made of different

materials require different types of fixing

accessories. Use fixing systems suitable

for the walls of your home and the weight

of the appliance. For more details, contact

a specialized dealer.

Keep this booklet for future consultation.

Filter Alarm

The Allarm for grease filter is Active on

the Hood as default, for the Reset check

control panel.

The Allarm for long life charcoal filter can

be Actived as per procedure on Control

Panel.

When the filter alarm is activated, the

following messages will appear over time:

Grease filter alarm must be cleaned:

“A” key flashes once per second. For

maintenance see paragraph Care and

cleaning.

Long Life charcoal filter alarm must be

cleaned: “A” key flashes twice per second.

For maintenance see paragraph Care and

cleaning.

Once the filters have been regenerated

reset the alarm signal (see paragraph

Control Panel).

8

ENGLISH

Product description

Upper chimney

Lower chimney

Hood body

LED Lighting

Grease filter

Control panel

Control Panel

S0614 (170201)

backlight symbols

112

20 20 20 20

8

S0614 (170201)

backlight symbols

A B C D E

BUTTON FUNCTION

A =

Speed Turn the motor on/o at speed one. Turn o each speed.

B =

Speed

Turn the motor on at speed two / Activate charcoal lter alarm

Pres and hold the button for approximately 2 seconds, with all the loads turned o (Motor+Lights), to turn the

Activated Charcoal Filter alarm on. LED (A) ashes twice to conrm.

To Deactivated Charcoal Filter alarm o, press the button again and hold for at least 2 seconds.The relevant

LED ashes once (A). Only for recirculation mode. (please refer to page 7)

C =

Speed

Turn the Motor on at speed three / Reset alarm grease and charcoal lter saturation

Pres and hold the button for approximately 2 seconds, with all the loads turned o (Motor+Lights),

to reset the grease and charcoal lter saturation alarm. LED (A) ashes three times.

D =

Speed

Turn the motor on at Booster speed.

This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically to the speed

that was set before. If it is activated with the motor turned o, it will switch to OFF at the end of the time. To

deactivate it, press button D or press button A

E =

Light

Pres briey: Turn the lighting system on and o at maximum intensity.

Pres and hold to change the lighting intensity up or down.

9

ENGLISH

Care and cleaning

Switch off or unplug the appliance

from the mains supply before carrying out

any maintenance work.

IMPORTANT Clean the hood using a damp

cloth and a neutral liquid detergent.

Long Life Charcoal Filter

The anti-odour Filter can be washed and

regenerated every 3-4 months (or more

frequently if the hood is subject to inten-

sive use), up to a Max. of 8 regeneration

cycles (in case of particularly intensive use

it is recommended that you do not exceed

5 cycles).

• Switch ON the hood at minimum speed when you start cooking and keep it running for

few minutes after cooking is finished.

• Increase the speed only in case of large amount of smoke and vapour and use boost

speed(s) only in extreme situations.

• Replace the charcoal filter(s) when necessary to maintain a good odour reduction ef-

ficiency.

• Clean the grease filter(s) when necessary to maintain a good grease filter efficiency.

• Use the maximum diameter of the ducting system indicated in this manual to optimize

efficiency and minimize noise.

General hints

Regeneration procedure:

• Wash in the dishwasher at a MAX

temperature of 70° or hand wash in hot

water without using abrasive sponges

(do not use detergents!).

• Dry in the oven at a MAX temperature

of 70° for 2 hours (it is recommended to

read carefully the user manual and the

assembly instruction of the oven of your

own).

10

ENGLISH

Grease Filters

Clean or replace the filters continuously ac-

cording to below time intervals, to maintain

good performance of the hood and to

prevent a potential fire hazard, caused by

excessive grease build-up.

The grease filters must be cleaned every 2

months of operation, or more frequently

for particularly heavy usage, and can be

washed in a dishwasher.

Replacing the lamps

For Replacement please contact an Author-

ized Service Center.

11

ENGLISH

What to do if...

If there is a fault, first try to find a solution

to the problem yourself. If you cannot find a

solution to the problem yourself, contact an

authorized service center.

If you operated the appliance wrongly,

or the installation was not carried out

according to the Assembly instructions, the

visit from the Authorized Service Centre

technician may not take place free of

charge, even during the warranty period.

Before contacting the Authorized Service Centre:

Switch the appliance on again to see if the problem has disappeared. If not, switch it off

again and repeat the operation after an hour.

If your appliance still does not work properly after carrying out the checks listed in the trou-

bleshooting guide and switching the appliance on again, contact the Authorized Service

Centre, clearly explaining the problem and specifying:

• the type of fault;

• the model;

• the type and serial number of the appliance (given on the rating plate).

PROBLEM POSSIBLE CAUSE SOLUTION

Appliance not stable. The appliance is not correctly installed. Follow the Installation instruction enclosed to the ap-

pliance.

Appliance is not in horizontal

position. The appliance is not correctly installed. Follow the Installation instruction enclosed to the ap-

pliance.

Performance in terms of oil capture

are not satisfying.

Oil and grease on metal lters or

charcoal lters.

Follow the cleaning frequency of lters as described in

the user manual.

Appliance does not work. The appliance is not correctly con-

nected.

Verify that the main cable is connected to the motor

group or the plug is connected to the socket.

The light does not work. The LED is broken. For replacement, contact the Authorized Service Centre.

Noise of hood is higher than

customer expectation.

Air outlet diameter in the wall is too

small, causing a pressure drop and an

increase in motor speed.

Follow the Installation instruction enclosed to the ap-

pliance.

Product is installed in recirculation

mode.

Product in recirculation mode(and using a charcoal lter)

will generate an higher noise than a product in extration

mode.

More than one bend in the ventilation

duct.

If the exhaust system in the building has multiple bend

in or a long distance, this can increase the noise of the

product.

Button A light ashing once per

second. Grease lter alarm.

Please clean grease lter and reset alarm. Refer to care

and cleaning guide for maintenance and control panel

guide to reset the lter alarm.

Button A lights ashing twice per

second. Charcoal lter alarm.

Charcoal lter alarm. Please clean charcoal lter and

reset alarm. Refer to care and cleaning guide

for maintenance and control panel guide to reset the

lter alarm.

12

ENGLISH

This appliance has been designed,

manufactured and marketed in compliance

with the E.E.C. Directives.

The technical information is situated in

the rating plate on the internal side of the

appliance.

Technical Data

Unit Value

Product Type Wall mounted hood

Dimensions

Width mm 698

Depth mm 381

Exhaust Height min/max mm 815/1065

Recirculating Height min/max mm 912/1185

Airow max* - Exhaust m3/h 380

Noise max* - Exhaust dBA 60

Airow max* - Recirculating m3/h 365

Noise max* - Recirculating dBA 78

Total Power W276

Lamps info

Type LED BAR

Number & Power 1 x 6W

Socket N/A

Installation minimum height - gas hob mm 500

Installation minimum height - elec hob mm 500

Net Weight Kg 16,5

* Maximum speed (boost excluded).

13

ENGLISH

Energy efficiency

Normative references:

EN/IEC 61591

EN/IEC 60704-1

EN/IEC 60704-2-13

EN/IEC 60704-3

EN 50564

Energy saving

The appliance contains features which help

you save energy during everyday cooking.

Product Information according to EU n°66/2014

Unit Value

Model identier BEMOTA

903.893.36

Annual Energy Consumption kWh/a 34,8

Time increase factor 0,6

Fluid Dynamic Eciency

37,6

Energy Eciency Index 36,6

Measured air ow rate at best eciency point m3/h 410

Measured air pressure at best eciency point Pa 459

Maximum air ow m3/h 700

Measured electric power input at best eciency point W139,0

Nominal power of the lighting system W6,0

Average illumination of the lighting system on the cooking surface lux 350

Measured power consumption in standby mode

WN/A

Measured power consumption o mode

W0,49

Sound power level at maximum speed (boost excluded)

dBA 60

14

ENGLISH

IKEA GUARANTEE

How long is the IKEA guarantee valid?

This guarantee is valid for five (5) years from

the original date of purchase of Your appliance

at IKEA. The original sales receipt is required as

proof of purchase. If service work is carried out

under guarantee, this will not extend the guaran-

tee period for the appliance.

Who will execute the service?

IKEA service provider will provide the service

through its own service operations or authorized

service partner network.

What does this guarantee cover?

The guarantee covers faults of the appliance,

which have been caused by faulty construction

or material faults from the date of purchase

from IKEA. This guarantee applies to domestic

use only. The exceptions are specified under

Environment concerns

Information on disposal

Your obligations as an end-user

This electrical or electronic equipment is marked with a

crossed-out wheeled bin. The equipment may therefore

only be collected and returned separately from unsorted

municipal waste, i.e. it must not be disposed of with

household waste. The equipment can be returned, for

example, to a municipal col-lection point or, if applicable,

to a distributor (see below for their take-back obligations

in Germany). This also applies to all components, sub-

assemblies and consumables of the old equipment to be

disposed of.

Before the old equipment may be disposed of all old batteries

and old accumulators that are not enclosed by the old equipment

must be separated from the old equipment. The same applies

to lamps that can be removed from the old equipment without

destroying them. The end-user is also responsible for deleting

personal data from the old equipment.

Notes on recycling

Help recycle all materials marked with this symbol. Do

not dispose of such materials, especially packaging, in the

household waste but via the relevant containers provided

or the appropriate local collection systems.

Help to protect the environment and human health by recycling

including waste of electrical and elec-tronic appliances.

The following additional information applies in Germany

Take-back obligations of distributors

Anyone who sells electrical and electronic equipment on a

sales floor area of at least 400 m² or oth-erwise supplies it to

end users on a commercial basis is obliged, when supplying

a new equipment, to take back at the place of supply or in the

immediate vicinity thereof free of charge an old equipment

belonging to the end user of the same type of equipment which

fulfils essentially the same functions as the new equipment. This

also applies to distributors of groceries with a total sales area

of at least 800 m² who offer electrical and electronic equipment

several times a calendar year or on a permanent basis and make

it available on the market. In addition, such distributors must,

at the request of the end-user, take back in the retail shop or in

the immediate vicinity free of charge old equipment that does

not exceed 25 cm in any external dimension (small electrical

equipment) thereof; in this case, take-back may not be linked to

the purchase of an electrical or electronic equipment but may be

lim-ited to three old equipment per type of equipment.

The place of delivery is also the private household if the new

electrical or electronic equipment is de-livered; in this case the

collection of the old equipment is free of charge for the end user.

The above obligations also apply to distribution using means of

distance communication if the dis-tributors maintain storage

and dispatch areas for electrical and electronic equipment or

total storage and dispatch areas for groceries that correspond

to the sales areas mentioned above. However, the free collection

of electrical and electronic equipment is then restricted to

heat transmitters (e.g. refrig-erators), screens, monitors and

equipment containing screens with a surface area of more

than 100 cm² and equipment where at least one of the external

dimensions is more than 50 cm. For all other electrical and

electronic equipment the distributor must ensure appropriate

return facilities within a reasonable distance from the respective

end-user; this also applies to small electrical equipment (see

above) that the end-user wishes to return without purchasing a

new equipment.

15

ENGLISH

the headline “What is not covered under this

guarantee?” Within the guarantee period, the

costs to remedy the fault e.g. repairs, parts,

labour and travel will be covered, provided that

the appliance is accessible for repair without

special expenditure. On these conditions the

EU guidelines (Nr. 99/44/EG) and the respective

local regulations are applicable. Replaced parts

become the property of IKEA.

What will lKEA do to correct the problem?

IKEA appointed service provider will examine

the product and decide, at its sole discretion, if

it is covered under this guarantee. If considered

covered, IKEA service provider or its authorized

service partner through its own service opera-

tions, will then, at its sole discretion, either repair

the defective product or replace it with the same

or a comparable product.

What is not covered under this guarantee?

• Normal wear and tear.

• Deliberate or negligent damage, damage

caused by failure to observe operating

instructions, incorrect installation or by con-

nection to the wrong voltage, damage caused

by chemical or electro-chemical reaction, rust,

corrosion or water damage including but

not limited to damage caused by excessive

lime in the water supply, damage caused by

abnormal environmental conditions.

• Consumable parts including batteries and

lamps.

• Non-functional and decorative parts which

do not affect normal use of the appliance,

including any scratches and possible color

differences.

• Accidental damage caused by foreign objects

or substances and cleaning or unblocking of

filters, drainage systems or soap drawers.

• Damage to the following parts: ceramic glass,

accessories, crockery and cutlery baskets,

feed and drainage pipes, seals, lamps and

lamp covers, screens, knobs, casings and

parts of casings. Unless such damages can be

proved to have been caused by production

faults.

• Cases where no fault could be found during a

technician’s visit.

• Repairs not carried out by our appointed ser-

vice providers and/or an authorized service

contractual partner or where non-original

parts have been used.

• Repairs caused by installation which is faulty

or not according to specification.

• The use of the appliance in a non-domestic

environment i.e. professional use.

• Transportation damages. If a customer

transports the product to their home or other

address, IKEA is not liable for any damage

that may occur during transport. However, if

IKEA delivers the product to the customer’s

delivery address, then damage to the product

that occurs during this delivery will be cov-

ered by this guarantee.

• Cost for carrying out the initial installation of

the IKEA appliance. However, if an IKEA ser-

vice provider or its authorized service partner

repairs or replaces the appliance under the

terms of this guarantee, the service provider

or its authorized service partner will re-install

the repaired appliance or install the replace-

ment, if necessary.

This restriction do not apply to fault-free work

carried out by a qualified specialist using our

original parts in order to adapt the appliance to

the technical safety specifications of another EU

country.

How country law applies

The IKEA guarantee gives You specific legal rights,

which covers or exceed local demands. However

these conditions do not limit in any way consumer

rights described in the local legislation

Area of validity

For appliances which are purchased in one EU

country and taken to another EU country, the

services will be provided in the framework of the

guarantee conditions normal in the new country.

An obligation to carry out services in the frame-

work of the guarantee exists only if the appliance

complies and is installed in accordance with:

• the technical specifications of the country in

which the guarantee claim is made;

• the Assembly Instructions and User Manual

Safety Information;

The dedicated After Sales Service for IKEA

appliances:

Please do not hesitate to contact IKEA After Sales

16

ENGLISH

Service to:

1. make a service request under this guarantee;

2. ask for clarification on installation of the

IKEA appliance in the dedicated IKEA kitchen

furniture. The service won’t provide clarifica-

tions related to:

- the overall IKEA kitchen installation;

- connections to electricity (if machine comes

without plug and cable), to water and to gas

since they have to be executed by an author-

ized service engineer.

3. ask for clarification on user manual contents

and specifications of the IKEA appliance.

To ensure that we provide you with the best

assistance, please read carefully the Assembly

Instructions and/or the User Manual section of

this booklet before contacting us.

How to reach us if You need our service

Please refer to the last page of this manual for

the full list of IKEA appointed contacts and rela-

tive national phone numbers.

Important! In order to provide You with a

quicker service, we recommend that You use

the specific phone numbers listed at the end of

this manual. Always refer to the numbers listed

in the booklet of the specific appliance You need

an assistance for. Before calling us, assure that

You have to hand the IKEA article number (8 digit

code) for the appliance of which you need our

assistance.

Important! SAVE THE SALES RECEIPT! It is Your

proof of purchase and required for the guaran-

tee to apply. Note that the receipt reports also

the IKEA article name and number (8 digit code)

for each of the appliances you have purchased.

Do You need extra help?

For any additional questions not related to After

Sales of your appliances. Please contact our

nearest IKEA store call centre. We recommend

you read the appliance documentation carefully

before contacting us.

17

DEUTSCH

Inhalt

Sicherheitsinformationen 17

Produktbeschreibung 21

Reinigung und Wartung 22

Was tun wenn... 24

Technische Daten 25

Energieeffizienz 26

Umweltaspekte 27

IKEA-GARANTIE 27

Sicherheitsinformationen

Zu Ihrer eigenen Sicherheit und für die korrekte Funktion des

Gerätes lesen Sie bitte diese Betriebsanleitung aufmerksam

durch, bevor Sie das Gerät installieren und benutzen. Verwahren Sie

die Bedienungsanleitung stets zusammen mit dem Gerät, auch

wenn Sie dieses an Dritte weitergeben oder übertragen. Es ist

wichtig, dass der Benutzer alle Betriebs- und Sicherheitsmerkmale

des Gerätes kennt.

Die Kabel müssen von einem zuständigen Fachmann

angeschlossen werden.

• Der Hersteller haftet nicht für etwaige Schäden, die durch eine

fehlerhafte Installation oder einen ungeeigneten Gebrauch

entstehen könnten.

• Der minimale Sicherheitsabstand zwischen Kochfeld und

Abzugshaube beträgt: für Elektro-Kochfelder 500 mm und für

Gas-Kochfelder 500 mm.

• Sollten die Installationsanweisungen des gasbetriebenen

Kochfelds einen größeren Abstand als oben angegeben vorsehen,

ist dies zu berücksichtigen.

• Sicherstellen, dass die Netzspannung der auf dem Typenschild

angegebenen Spannung entspricht. Das Typenschild ist im

Inneren der Haube angebracht.

• Trennvorrichtungen müssen in der festen Anlage gemäß Normen

über Verkabelungssysteme installiert werden.

• Für Geräte der Klasse I sicherstellen, dass das Versorgungsnetz

des Gebäudes korrekt geerdet ist.

• Die Abzugshaube an den Schornstein mit einem Rohr mit

18

DEUTSCH

Mindestdurchmesser von 120 mm anschließen. Der Verlauf des

Rauchabzugs muss so kurz wie möglich sein.

• Die Abzugshaube darf nicht an einen Schacht angeschlossen

werden, in den Rauchgase abgeleitet werden (z. B. von

Heizkesseln, Kaminen, usw.).

• Falls die Abzugshaube mit Geräten verwendet wird, die nicht

elektrisch betrieben sind (z.B. Gasgeräte), muss im Raum für eine

ausreichende Belüftung gesorgt werden, damit der Rückfluss

der Abgase verhindert wird. Wird die Abzugshaube zusammen

mit nicht elektrisch betriebenen Geräten eingesetzt, darf der

Unterdruck im Raum 0,04 mbar nicht überschreiten, damit die

Abgase nicht wieder angesaugt werden.

• Die Luft darf nicht durch einen Kanal abgelassen werden, der als

Rauchabzug für Gasgeräte oder Geräte verwendet wird, die mit

anderen Brennstoffen betrieben werden.

• Wenn das Gerätekabel beschädigt ist, muss es vom Hersteller

oder von einem Kundendiensttechniker ersetzt werden.

• Den Stecker in eine den einschlägigen Vorschriften entsprechende

zugängliche Steckdose stecken.

• Was die technischen und sicherheitsrelevanten Maßnahmen

für den Rauchabzug betrifft, sind die Vorgaben der örtlichen

Behörden streng einzuhalten.

WARNUNG: Bevor die Haube installiert wird, die Schutzfolien

abziehen.

• Nur für die Abzugshaube geeignete Schrauben und Kleinteile

verwenden.

WARNUNG: Die mangelnde Verwendung von Schrauben und

Befestigungselementen gemäß der vorliegenden Anleitung

kann zu Stromschlaggefahr führen.

• Die Haube an das Stromnetz mithilfe eines zweipoligen Schalters

mit einem Kontaktabstand von mindestens 3 mm anschließen.

• Nicht direkt mit optischen Instrumenten (Fernglas, Lupe, usw.) in

das Licht schauen.

19

DEUTSCH

• Auf keinen Fall unter der Haube flambieren: Dabei könnte ein

Brand entstehen.

• Dieses Gerät darf von Kindern ab 8 Jahren und von Personen

mit beschränkten geistigen, physischen oder sensorischen

Fähigkeiten oder mangels Erfahrung und/oder mangels Wissen

benutzt werden, vorausgesetzt, sie werden aufmerksam

beaufsichtigt oder über den sicheren Gebrauch des Geräts und

die damit verbundenen Gefahren eingewiesen. Sicherstellen, dass

Kinder nicht mit dem Gerät spielen. Vom Benutzer auszuführende

Reinigungs- und Wartungsarbeiten dürfen nicht von Kindern

ausgeführt werden, sofern sie nicht dabei beaufsichtigt werden.

• Kinder müssen beaufsichtigt werden, damit sichergestellt wird,

dass sie nicht am Gerät spielen.

• Dieses Gerät darf nicht von Personen (einschließlich Kindern)

mit beschränkten geistigen, physischen oder sensorischen

Fähigkeiten oder mangels Erfahrung und/oder mangels Wissen

benutzt werden, außer sie werden aufmerksam beaufsichtigt und

eingewiesen.

Die frei zugänglichen Teile können während des Kochens mit

Kochgeräten sehr heiß werden.

• Die Filter sind nach den angegebenen Intervallen zu reinigen und/

oder zu ersetzen (Brandgefahr).

• Wenn die Abzugshaube gleichzeitig mit Geräten verwendet wird,

die Gas oder andere Brennstoffe benutzen, muss im Raum eine

ausreichende Belüftung vorhanden sein (gilt nicht für Geräte, die

nur Luft in den Raum ablassen)

20

DEUTSCH

Gebrauch

• Vor Reinigungs- oder Wartungsarbeiten

am Gerät muss dieses ausgeschaltet und

spannungslos gemacht werden.

• Keine Gegenstände auf der Abzugshaube

abstellen.

• Die Abzugshaube wurde ausschließlich

dazu entwickelt, um im Haushalt

Küchendünste zu beseitigen.

• Die Haube niemals für andere Zwecke

verwenden, als die für welche sie

entwickelt worden ist.

• Unter der eingeschalteten Haube keine

offenen hohen Flammen benutzen.

• Die Flamme so regulieren, dass sie nicht

über den Umfang des Kochgeschirrs

hinausragt.

Fritteusen müssen während des Gebrauchs

ständig überwacht werden: Überhitztes Öl

könnte sich entzünden.

Installationsanleitung

Die Abzugshaube ist für „Abluftbetrieb“ oder

„Umluftbetrieb“ entwickelt worden.

9

min 471 mm

max 861 mm

min 569 mm

max 861 mm

min 471 mm

max 861 mm

min 569 mm

max 861 mm

Abluftbetrieb (siehe das Symbol in

der Installationsanleitung)

Die Kochdämpfe werden abgesaugt und

über ein am Auslass der Haube installiertes

Abzugsrohr (nicht mitgeliefert) nach außen

geleitet.

Sicherstellen, dass das Abzugsrohr richtig am

Luftauslass installiert ist und ein geeignetes

Anschlusssystem verwendet wurde.

9

min 471 mm

max 861 mm

min 569 mm

max 861 mm

min 471 mm

max 861 mm

min 569 mm

max 861 mm

Umluftbetrieb (siehe das Symbol in

der Installationsanleitung)

Die Luft wird durch einen oder mehrere Filter

gefiltert und dann wieder in den Raum zurück

gefördert.

Wichtig: Sicherstellen, dass die Luft um die

Haube herum richtig zirkuliert.

Wichtig: Wenn die Haube ohne

Aktivkohlefilter geliefert wurde, müssen die

Filter bestellt und vor der Inbetriebnahme des

Gerätes montiert werden. Die Filter sind im

Handel erhältlich.

Die Abzugshaube muss fern von stark

verschmutzten Bereichen, Fenstern, Türen

und Wärmequellen installiert werden.

Die Befestigungselemente sind nicht

in der Lieferung enthalten, weil sie je

nach Beschaffenheit der Wand variieren.

Verwenden Sie für die Wände Ihrer

Wohnung und das Gewicht des Gerätes

geeignete Befestigungssysteme. Für weitere

Informationen wenden Sie sich an einen

Fachhändler.

Die vorliegende Bedienungsanleitung

für späteres Nachschlagen sorgfältig

aufbewahren.

Filteralarm.

Der Alarm für den Fettfilter ist

standardmässig auf der Haube aktiv. Für das

„Reset“ prüfen Sie bitte den Bedienfeld.

Der Alarm für den Long Life Kohlefilter wird

laut des Verfahrens beim Bedienfeld aktiviert.

Wenn der Filteralarm aktiviert wird,

erscheinen je nach Umständen die folgenden

Meldungen:

Alarm – Fettfilter reinigen: Die Taste „A“ blinkt

ein Mal pro Sekunde. Zur Wartung, siehe

Absatz Wartung und Reinigung.

Alarm – Geruchsfilter reinigen: Die Taste „A“

blinkt zwei Mal pro Sekunde. Zur Wartung,

siehe Absatz Wartung und Reinigung.

Nachdem die Filter regeneriert worden sind,

das Alarmsignal zurücksetzen (siehe Absatz

Bedienleiste).

La pagina si sta caricando...

IKEA BEMOTA Wall Mounted Extractor Hood Manuale utente

IKEA BEMOTA Wall Mounted Extractor Hood Manuale utente

in altre lingue