Sharp HT-SB106 Manuale del proprietario

User manual

HT-SB106

2.0 Soundbar Home Theatre System

EN DE PLFRITES

Trademarks:

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth

SIG,. Inc.

The terms HDMI, HDMI High-Denition Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

4

Important safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Please, read these safety instructions and respect the

following warnings before the appliance is operated:

The lightning  ash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of su cient

magnitude as to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Use only power supply listed in the user manual.

This symbol means that the product should be disposed of in an

environmentally friendly manner and not with general household waste.

AC voltage

DC voltage

Class II equipment

In order to prevent  re always

keep candles and other open

 ames away from this product.

Warning:

• Always follow basic safety precautions when using this applience, especially when

children are present.

• Children should be supervised to ensure that they do not play with the appliance.

• Do not damage the power cord, neither do not place any heavy objects on it, do not

strech it or bend it. Also do not attach extension cables. Damage to the power cord

may occur  re or electric shock.

• If the supply cord is damaged, it must be replaced by the manufacturer, a service

agent or similarly qualied persons in order to avoid a hazard.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

EN

• Ensure that the unit is plugged into an AC 100-240V 50/60Hz power outlet. Using

higher voltage may cause the unit to malfunction or even  re catching.

• If the power plug does not  t into your outlet, do not force the plug into an electri-

cal socket if it does not  t.

• Turn o the unit before unplugging it from power source to completely switch it o .

• Do not disconnect or connect the power cord with wet hands. It may cause an

electric shock.

• Disconnect the power cord if it is not used for a long time.

• Ensure that the mains plug is always easily accessible.

• This product does not contain any parts that are serviceable by the user. In case

of a fault, contact the manufacturer or authorised service department. Exposing

the internal parts inside the device may endanger your life. The manufacturers

guarantee does not extend to faults caused by repairs carried out by unauthorised

third parties.

• Do not use this product immediately after unpacking. Wait until it warms up to

room temperature before using it.

• Ensure this product is used in moderate climates only (not in tropical/subtropical

climates).

• Place product on a  at, stable surface that is not subject to vibrations.

• Ensure the product and its parts is not overhanging the edge of the supporting

furniture.

• To reduce the risk of ﬁre, electric shock or damage to this product, do not expose it

to direct sunlight, dust, rain and moisture. Never expose it to dripping or splashing

and do not place objects ﬁlled with liquids on or near the product.

• Do not place objects  lled with liquids, such as vases, on the apparatus.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampli ers) that produce heat.

• Do not place the product where the humidity is high and ventilation is poor.

• Ensure a minimum distance of 5 cm around the apparatus for su cient ventilation.

Do not block any ventilation openings of this product. Always ensure that the

ventilation openings are not covered with items such as newspapers, table-cloths,

curtains, etc.

• NEVER let anyone, especially children, push anything into holes, slots or any other

openings in the unit’s casing as this could result in a fatal electric shock.

• Storms are dangerous for all electric appliances. If the mains or aerial wiring is struck

by lightning, the appliance might get damaged, even if it is turned o . You should

disconnect all the cables and connectors of the appliance before a storm.

• Excessive sound pressure from earphones and headphones can cause hearing loss.

Maintenance

• Unplug the power cable from the power source before cleaning the appliance.

• Use a soft and clean rag to clean the outside of the unit. Never clean it with chemi-

cals or detergent.

Power Adapter

• To disconnect the unit from the mains supply, unplug the lead from the mains

socket.

• Only use the supplied mains adaptor as failure to do this may result in a safety risk

and/or damage to the unit.

Batteries

• Observe the correct polarity when inserting the batteries.

• Do not expose batteries to high temperatures and do not place them on locations

where the temperature might increase quickly, e.g. near the  re or on the direct

sunshine.

• Do not expose batteries to excessive radiant heat, do not throw them into the  re,

do not disassemble them and do not try to recharge un-rechargeable batteries.

They could leak or explode.

• Never use di erent batteries together or mix new and old ones.

• When the Remote Control is not to be used for a long time (more than a month),

remove the battery from the Remote Control to prevent it from leaking.

• If the batteries leak, wipe away the leakage inside the battery compartment and

replace the batteries with new ones.

• Do not use any batteries other than those specied.

Do not ingest battery, chemical burn hazard

• If the battery is swallowed, it can cause severe internal burns in just 2 hours and

lead to death. Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and keep it away from

children. If you think batteries might have been swallowed or placed inside any part

of the body, seek immediate medical attention.

Disposal of this equipment and Batteries

• Do not dispose of this product or its batteries as unsorted municipal

waste. Return it to a designated collection point for the recycling

of WEEE in accordance with local law. By doing so, you will help to

conserve resources and protect the environment.

• Most of the EU countries regulate the disposal of batteries by law.

Contact your retailer or local authorities for more information.

• The shown above appears on electrical and electronivcal equipment

and batteries (or the packaging) to remind users of this. If "Hg" or 'Pb'

appears below the symbol, this mean that the battery cantains traces

of mercury (Hg) or lead (Pb), respectively.

• Users are requested to use existing return facilities for used equipment

and batteries.

CE Statement:

• Hereby, Sharp Consumer Electronics Poland sp. z o.o. declares that this audio device

is in compliance with the essential requirements and other relevant provisions

of RED Directive 2014/53/EU. The full text of the EU declaration of conformity is

available by following the link www.sharpconsumer.eu and then entering download

section of your model and choosing “CE Statements”.

6

• Only use the supplied mains adaptor as failure to do this may result in a safety risk

and/or damage to the unit.

Batteries

• Observe the correct polarity when inserting the batteries.

• Do not expose batteries to high temperatures and do not place them on locations

where the temperature might increase quickly, e.g. near the  re or on the direct

sunshine.

• Do not expose batteries to excessive radiant heat, do not throw them into the  re,

do not disassemble them and do not try to recharge un-rechargeable batteries.

They could leak or explode.

• Never use di erent batteries together or mix new and old ones.

• When the Remote Control is not to be used for a long time (more than a month),

remove the battery from the Remote Control to prevent it from leaking.

• If the batteries leak, wipe away the leakage inside the battery compartment and

replace the batteries with new ones.

• Do not use any batteries other than those specied.

Do not ingest battery, chemical burn hazard

• If the battery is swallowed, it can cause severe internal burns in just 2 hours and

lead to death. Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and keep it away from

children. If you think batteries might have been swallowed or placed inside any part

of the body, seek immediate medical attention.

Disposal of this equipment and Batteries

• Do not dispose of this product or its batteries as unsorted municipal

waste. Return it to a designated collection point for the recycling

of WEEE in accordance with local law. By doing so, you will help to

conserve resources and protect the environment.

• Most of the EU countries regulate the disposal of batteries by law.

Contact your retailer or local authorities for more information.

• The shown above appears on electrical and electronivcal equipment

and batteries (or the packaging) to remind users of this. If "Hg" or 'Pb'

appears below the symbol, this mean that the battery cantains traces

of mercury (Hg) or lead (Pb), respectively.

• Users are requested to use existing return facilities for used equipment

and batteries.

CE Statement:

• Hereby, Sharp Consumer Electronics Poland sp. z o.o. declares that this audio device

is in compliance with the essential requirements and other relevant provisions

of RED Directive 2014/53/EU. The full text of the EU declaration of conformity is

available by following the link www.sharpconsumer.eu and then entering download

section of your model and choosing “CE Statements”.

EN

Accessories

• 1x Remote control

• 2x AAA battery

• 1x User guide

• 1x Power adapter

• 1x Set of wall-mounting screws

• 1x Quick start guide

Controls

1 2

3

4

5

1. Indicator light

• Red: In STANDBY mode.

• Blue: In Bluetooth mode.

• Green: In LINE IN mode.

• Yellow: In Optical mode.

• Cyan: In HDMI ARC mode.

• Purple: In USB mode.

NOTE: The Bluetooth/LINE IN/Optical/

HDMI ARC/USB mode indicator light

will stay on for about twenty seconds

while in the selected mode, it will then

turn o automatically.

2. Remote sensor

3.

Standby – Switch the unit be-

tween ON and STANDBY mode.

4.

Source – Select the play function.

5. Volume +/- – Increase/decrease the

volume level.

Inputs/Outputs

1 2 3 4 5

HDMI - ARC/CEC OPTICAL DC INLINE INUSB

1. ARC Socket – Connect to a TV via

HDMI cable.

2. USB Socket – Used to connect with

the USB  ash disk.

3. LINE IN Socket – Connect to an

external audio device.

4. OPTICAL Socket – Opticial input

jack.

5. DC IN Socket – Socket for connect-

ing power adapter (DC 18V/2.2A).

Remote control

1. – Switch the unit between ON and

STANDBY mode.

2.

– Select the Bluetooth mode.

Press and hold to activate the

pairing function in Bluetooth mode

or disconnect the existing paired

Bluetooth device.

3.

– Select the play function.

8

4. VOL +/- – Increase/decrease the

volume level.

5.

/ – Skip to previous/next track

in Bluetooth mode.

6.

– Play/pause/resume playback in

Bluetooth mode.

7.

– (MUTE) Mute or resume the

sound.

8. BASS +/- – Adjust bass level.

9. TRE +/- – Adjust treble level.

10. EQ – Select a preset sound mode.

RC OPERATIONS

The provided Remote Control allows

the unit to

be operated from a distance.

• Even if the Remote Control is operated

within the e ective range of 6m, remo-

te control operation may be impossible

if there are any obstacles between the

unit and the remote control.

• If the Remote Control is operated near

other products which generate infrared

rays, or if other remote control devices

using infra-red rays are used near the

unit, it may operate incorrectly. Conver-

sely, the other products may operate

incorrectly.

BATTERY INSTALLATION

1. Press and slide the back cover to

open the battery compartment of the

remote control.

2. Insert two AAA size batteries

(included). Make sure the (+) and (–)

ends of the batteries match the (+)

and (–) ends indicated in the battery

compartment.

3. Close the battery compartment cover.

First time installation

Placement and Mounting

A B

A: Normal Placement

(Place Soundbar on leveled surface in

front of TV.)

B: Wall Mounting

Wall Mounting

NOTE:

 Installation must be carried out by

quali ed personnel only. Incorrect

assembly can result in severe personal

injury and property damage (if you

intend to install this product yourself,

you must check for installations such

as electrical wiring and plumbing that

may be buried inside the wall). It is the

installer’s responsibility to verify that

the wall will safely support the total

load of the unit and wall brackets.

 Additional tools (not included) are

required for the installation.

 Do not overtighten screws.

 Keep this instruction manual for future

reference.

 Use an electronic stud  nder to check

the wall type before drilling and

mounting.

500 mm

1

2

(4mm)

2

500 mm

ARC OPTICAL LINE IN UPGRADE

~AC IN

EN

1. Drill 2 parallel holes (Ø 6mm) in the

wall. The distance between the holes

should be 500 mm.

 Firmly  x one dowel into each hole

in the wall and then insert screws

into them.

2. Leave a 4mm gap between the wall

and the screw’s head. Lift the unit

with the attached wall brackets over

the heads of the screws and slot into

place.

Connections

OPTICAL DC INLINE INUSB

HDMI - ARC/CEC

HDMI ARC input

The ARC (Audio Return Channel) function

allows you to send audio from your ARC-

compliant TV to your sound bar through a

single HDMI connection. To enjoy the ARC

function, please ensure your TV is both

HDMI-CEC and ARC compliant and set up

accordingly. When correctly set up, you

can use your TV remote control to adjust

the volume output (VOL +/- and MUTE) of

the sound bar.

 Connect the HDMI cable (not included)

from unit‘s HDMI (ARC) socket to the

HDMI (ARC) socket on your ARC com-

pliant TV. Then press the remote control

to select HDMI ARC.

TIPS:

• Your TV must support the HDMI-CEC

and ARC function. HDMI-CEC and ARC

must be set to On.

• The setting method of HDMI-CEC and

ARC may di er depending on the TV.

For details about ARC function, please

refer to your TV owner’s manual.

• Only HDMI cables of version 1.4 or

higher can support the ARC function.

• While in HDMI ARC/OPTICAL mode, if

there’s no sound output from the unit,

you may need to activate PCM signal

output on your source device (eg. TV,

DVD or Blu-ray player).

OPTICAL DC INLINE INUSBHDMI - ARC/CEC

OPTICAL input

• Use the optical cable to connect the

optical input of this soundbar to the

optical output of VCD, CD, VCR, DVD

player.

TIPS:

• While in HDMI ARC/OPTICAL mode, if

there’s no sound output from the unit,

you may need to activate PCM signal

output on your source device (eg. TV,

DVD or Blu-ray player).

OPTICAL DC INLINE INUSB

HDMI - ARC/CEC

10

LINE IN

A. Use a RCA to 3.5mm audio cable (not

included) to connect the TV’s audio

output sockets to the LINE IN socket

on the unit.

B. Use a 3.5mm to 3.5mm audio cable

(not included) to connect the TV’s

or external audio device headphone

socket to the LINE IN socket on the

unit.

TIP:

When you use the headphone output on

the TV set, you will be able to adjust the

volume level directly using the TV remote

control.

HDMI - ARC/CEC OPTICAL DC INLINE INUSB

EU

UK

DC IN

Connect to Power

• Before connecting the power adapter,

ensure you have completed all other

connections.

• Risk of product damage! Only use the

supplied mains adaptor as failure to do

this may result in a safety risk and/or

damage to the unit.

• Connect the power adapter to the DC

IN socket of the unit and then into a

mains socket.

Basic Operation

Standby/ON

• When you  rst connect the unit to the

main socket, the unit will be in STAND-

BY mode.

• Press the

button on the remote cont-

rol to switch the main unit ON or OFF.

• Disconnect the main plug from the

main socket if you want to switch the

unit o completely.

 When the unit has no input signal for

over 15 minutes, it will automatically

switch to Standby mode.

Select Modes

Press the button on the unit

repeatedly or press the

/ buttons on

the remote control to select the desired

mode.

Adjust the Volume

 Press the + / - buttons on the unit or

on the remote control to adjust the

volume.

 If you wish to turn the sound o , press

the

button on the remote control.

Press the

button again or press the

+/- buttons on the unit or on the remo-

te control to resume normal listening.

Select Equaliser (EQ) Eﬀ ect

While playing, press the EQ button on the

remote control to select between preset

equalisers.

Each time the button is pressed it will

move between the EQ functions as below:

Music (recommended for listening to

all types of music) - white light  ashes

2 seconds

Movie (recommended for use with

movies) - green light  ashes for 2 seconds

News (recommended for listening to

voices) - yellow light  ashes for 2 seconds

Custom (use to set personal bass/treble

settings) - blue light  ashes 2 seconds

NOTE: Bass/Treble setting is

available only in custom preset.

LINE IN/OPTICAL/HDMI ARC

1. Ensure that the unit is connected to

the TV or audio device.

2. While in ON mode, press the

button on the unit repeatedly or press

EN

the button on the remote control

to select the desired mode.

3. Operate your audio device directly for

playback features.

4. Press the +/– button to adjust the

volume to your desired level.

TIP:

While in HDMI ARC/OPTICAL mode, if

there’s no sound output from the unit,

you may need to activate PCM signal

output on your source device (eg. TV, DVD

or Blu-ray player).

Bluetooth Operation

Pair Bluetooth-enabled Devices

The  rst time you connect your Bluetooth

device to this player, you need to pair

your device to this player.

NOTE:

 The operational range between this

player and a Bluetooth device is

approximately 8 meters (without any

object between the Bluetooth device

and the unit).

 Before you connect a Bluetooth device

to this unit, ensure you know the

device’s capabilities.

 Compatibility with all Bluetooth de-

vices is not guaranteed.

 Any obstacle between this unit and

a Bluetooth device can reduce the

operational range.

 If the signal strength is weak, your

Bluetooth receiver may disconnect,

but it will re-enter pairing mode

automatically.

1. Turn on the soundbar by pressing the

standby button.

2. Press the

button on the unit

repeatedly or

button on the remote

control to select the Bluetooth mode.

You are in Bluetooth mode when

the blue Bluetooth indicator  ashes

quickly.

3. Enter the Bluetooth search mode on

the device you wish to connect to the

soundbar.

4. Select SHARP HT-SB106 from the list.

5. Your device and the soundbar will

now be connected; the blue indicator

will stop  ashing.

– To disconnect your device, switch o

the Bluetooth connection or hold down

button on the remote control for 3

seconds.

TIPS:

• Enter „0000“ for the password if

necessary.

• The player will also be disconnected

when your device is moved beyond the

operational range.

• If you want to reconnect your device

to this player, place it within the opera-

tional range.

• If the device is moved beyond the

operational range, when it is brought

back, please check if the device is still

connected to the player.

• If the connection is lost, follow the

instructions above to pair your device

to the player again.

Listen to Music from Bluetooth

Device

 If the connected Bluetooth device

supports Advanced Audio Distribution

Pro le (A2DP), you can listen to the

music stored on the device through the

soundbar‘.

 If the device also supports Audio Video

Remote Control Pro le (AVRCP), you

can use the soundbar‘s remote control

to play music stored on the device.

1. Pair your device with the player.

2. Play music via your device (if it

supports A2DP).

3. Use supplied remote control to control

play (if it supports AVRCP).

12

 To pause/resume play, press the

button on the remote control.

 To skip to a track, press the

/

buttons on the remote control.

USB Operation

1. Insert USB storage drive into the USB

slot on the rear panel.

2. Press

button repeatedly on the

unit or

button on the remote

control to select USB mode.

3. Unit will start playing the MP3 track

automatically from the connected

USB drive.

If the MP3 playback does not start

automatically, press

button on the

remote control.

Troubleshooting

To keep the warranty valid, never try

to repair the system yourself. If you

encounter problems when using this unit,

review the following before requesting

service.

No power

Ensure that the power adaptor is properly

connected to the units DC IN socket and

to the mains socket.

Ensure that there is power at the AC

outlet.

Press standby button on the remote

control or soundbar to turn the soundbar

on.

No sound

Increase the volume. Press Volume Up on

the remote control or on the right side of

the soundbar.

Press

on the remote control to ensure

the soundbar is not muted.

Press source buttons to select a di erent

input source.

When using either of the Digital input, if

there is no audio:

 Try setting the TV output to PCM or

 Connect directly to your Blu-ray/other

source, some TVs do not pass through

digital audio.

Your TV may be set to variable audio

output. Con rm that the audio output

setting is set to FIXED or STANDARD, not

VARIABLE. Consult your TV’s user manual

for more detailed information.

If using Bluetooth, ensure that the volume

on your source device is turned up and

that the device is not muted.

Remote control does not work

Before you press any playback control

button,  rst select the correct source.

Reduce the distance between the remote

control and the unit.

Insert the battery with its polarities (+/-)

aligned as indicated.

Replace the battery.

Aim the remote control directly at the

sensor on the front of the unit.

I hear buzzing or humming

Ensure all cables and wires are securely

connected.

Connect a di erent source device (TV,

Blu-ray player, etc) to see if the buzzing

persists. If it does not, the problem may

be with the original device.

Connect your device to a di erent input

on the soundbar.

I can’t  nd the Bluetooth name of this

unit on my Bluetooth device

Ensure the Bluetooth function is activated

on your Bluetooth device.

Re-pair the unit with your Bluetooth

device.

This is a 15 mins power oﬀ function,

one of the ERPII standard requirement

for saving power

When the unit’s external input signal

level is too low, the unit will be turned

o automatically in 15 minutes. Please

increase the volume level of your external

device.

DE

Wichtige Sicherheitsanweisungen

VORSICHT

GEFAHR AUF STROMSCHLAG

NICHT ÖFFNEN

Bitte lesen Sie sich diese Sicherheitsanweisungen durch und

beachten Sie, bevor Sie das Gerät in Betrieb nehmen, auf die

folgenden Warnhinweise:

Das Dreieckszeichen mit Blitzsymbol verweist auf nicht isolierte

„gefährliche Spannungen“ im Gerätegehäuse, die so hoch sein können,

dass sie eine Gefahr von Stromschlägen bilden.

Das Dreieckszeichen mit Ausrufungszeichen verweist auf wichtige

Funktions - und Wartungshinweise (Reparatur) in der dem Gerät

beigelegten Bedienungsanleitung.

Benutzen Sie nur die Energieversorgung, die in der Bedienungsanleitung

angegeben ist.

Dieses Symbol bedeutet, dass das Produkt auf umweltfreundliche Weise

und nicht mit dem gewöhnlichen Haushaltsmüll entsorgt werden sollte.

Wechselspannung

Gleichspannung

Gerät der KlasseII

Halten Sie Kerzen und oﬀ enes

Feuer von diesem Produkt fern,

um einen Brand zu vermeiden.

Warnung:

• Halten Sie sich während der Nutzung dieses Geräts immer an die allgemeinen

Sicherheitshinweise, insbesondere, wenn Kinder in der Nähe sind.

• Kinder sollten beaufsichtigt werden, um sicherzustellen, dass sie nicht mit dem

Gerät spielen.

• Das Stromkabel darf weder beschädigt, noch dürfen schwere Objekte darauf

abgelegt werden, außerdem dürfen Sie es nicht dehnen oder verbiegen. Schließen

Sie auch keine Verlängerungskabel an. Schäden am Stromkabel können zu einem

Feuer oder Stromschlag führen.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

14

• Wenn das Stromversorgungskabel beschädigt ist, muss es vom Hersteller, einem

Servicetechniker oder einer ähnlich quali zierten Person ausgetauscht werden, um

Gefährdungen zu vermeiden.

• Stellen Sie sicher, dass die Einheit an eine AC 100-240V 50/60Hz Steckdose ange-

schlossen wird. Eine höhere Spannung kann zu Fehlfunktionen oder sogar zu einem

Brand führen.

• Wenn der Stecker nicht in die Steckdose passt, dürfen Sie keine Gewalt anwenden,

um einen nicht passenden Stecker in die Steckdose zu drücken.

• Schalten Sie die Einheit aus, bevor Sie sie von der Stromversorgung trennen, um sie

so vollständig abzuschalten.

• Vermeiden Sie es, das Stromkabel mit nassen Händen anzuschließen oder zu tren-

nen. Dies könnte andernfalls zu einem Stromschlag führen.

• Trennen Sie das Stromkabel, wenn es längere Zeit nicht verwendet wird.

• Stellen Sie sicher, dass der Hauptstecker immer leicht zugänglich ist.

• Dieses Produkt enthält keine Teile, die vom Benutzer gewartet werden können.

Setzen Sie sich im Fall eines Defekts mit dem Hersteller oder der autorisierten

Kundenabteilung in Verbindung. Teile aus dem Inneren des Geräts freizulegen kann

lebensgefährlich sein. Die Garantie der Hersteller gilt nicht für Defekte, die durch

von nicht autorisierte Dritten durchgeführte Reparaturen entstehen.

• Benutzen Sie dieses Produkt nicht direkt nach dem Auspacken. Warten Sie, bis es

sich auf Zimmertemperatur erwärmt hat, ehe sie es einschalten.

• Stellen Sie sicher, dass dieses Produkt ausschließlich in Umgebungen mit mildem

Klima verwendet wird (kein tropisches oder subtropisches Klima).

• Stellen Sie das Produkt auf eine  ache, stabile Ober äche, die keinen Erschütterun-

gen ausgesetzt ist.

• Das Produkt und dessen Teile dürfen nicht über die Kante delelte tragenden Möbel-

stücks hinausragen.

• Um das Risiko eines Feuers, Stromschlags oder Schäden an diesem Produkt zu re-

duzieren, sollten Sie es nicht direktem Sonnenlicht, Staub, Regen oder Feuchtigkeit

aussetzen. Setzen Sie es niemals tropfendem oder spritzendem Wasser aus und

positionieren Sie keine mit Flüssigkeiten gefüllten Objekte auf oder neben dem

Produkt.

• Setzen Sie keine mit Flüssigkeit gefüllten Objekte wie Vasen auf das Gerät.

• Installieren Sie das Produkt nicht in der Nähe von Heizquellen, wie etwa Heizungen,

Heizregister, Öfen oder anderen Apparaten (einschließlich Verstärker), die Hitze

produzieren.

• Platzieren Sie das Gerät nicht an Orten mit hoher Feuchtigkeit und mangelhafter

Belüftung.

• Sorgen Sie für einen Mindestabstand von 5 cm rund um das Gerät, um eine ausrei-

chende Belüftung sicherzustellen. Vermeiden Sie es, Belüftungsö nungen an die-

sem Produkt zu blockieren. Sorgen Sie immer dafür, dass die Belüftungsö nungen

nicht durch Gegenstände, z. B. Zeitungen, Tischdecken, Gardinen usw. verdeckt sind.

• Lassen Sie NIEMALS jemanden, ganz besonders nicht Kinder, etwas in die Löcher,

Spalten oder anderen Ö nungen des Gerätegehäuses stopfen, da dies zu einem

folgenschweren Stromschlag führen kann.

• Gewitter sind für alle elektrischen Geräte gefährlich. Wenn das Strom- oder Anten-

nenkabel vom Blitz getro en wird, kann das Gerät, auch wenn es ausgeschaltet ist,

beschädigt werden. Bei einem herannahenden Gewitter sollten Sie alle Kabel und

Stecker des Gerätes ausstecken.

• Ein exzessiver Schalldruck von Kopfhörern kann zu einem Hörverlust führen.

Wartung

• Trennen Sie vor dem Reinigen des Geräts das Stromkabel von der Stromquelle.

• Verwenden Sie einen weichen und sauberen Lappen, um die Außen ächen der

Einheit zu reinigen. Verwenden Sie beim Reinigen niemals Chemikalien oder

Reinigungsmittel.

Netzadapter

• Um die Einheit von der Stromversorgung zu trennen, trennen Sie das Netzkabel von

der Steckdose.

• Benutzen Sie nur den mitgelieferten Netzadapter, andernfalls kann es zu einem

Sicherheitsrisiko/einer Beschädigung des Gerätes kommen.

Batterien

• Achten Sie beim Einlegen der Batterien auf die richtige Polarität.

• Setzen Sie Batterien keinen hohen Temperaturen aus und

legen Sie sie nicht an Stellen ab, wo sich die Temperatur schnell

erhöht, z. B. neben einem Feuer oder in die direkte Sonnenein-

strahlung.

• Setzten Sie Batterien keiner übermäßigen Strahlungswärme

aus, werfen Sie sie nicht ins Feuer oder bauen sie auseinander

und versuchen Sie nicht, nicht au adbare Batterien aufzuladen.

Sie könnten undicht werden oder explodieren.

• Verwenden Sie niemals unterschiedliche Batterien oder vermi-

schen neue mit alten.

• Wenn Sie die Fernbedienung für längere Zeit nicht verwenden (länger als einen

Monat), sollten Sie die Batterie aus der Fernbedienung nehmen, um ein Auslaufen

zu verhindern.

• Wenn die Batterien auslaufen, wischen Sie die ausgelaufene Flüssigkeit im Batterie-

fach weg und ersetzen die Batterien durch neue.

• Verwenden Sie immer nur die angegebenen Batterien.

• Batterie nicht verschlucken, Gefahr von chemischen Verbrennungen

• Wenn die Batterie verschluckt wird, kann dies zu schweren inneren Verbrennungen

innerhalb von nur 2 Stunden führen und tödlich sein. Bewahren Sie neue und

gebrauchte Batterien für Kinder unzugänglich auf. Wenn das Batteriefach nicht fest

geschlossen werden kann, sollten Sie das Gerät nicht weiter verwenden und es für

Kinder unzugänglich aufbewahren. Wenn Sie vermuten, dass Batterien verschluckt

oder in irgendein Körperteil eingeführt wurden, müssen Sie sofort medizinische

Hilfe in Anspruch nehmen.

Entsorgung dieses Geräts und von Batterien

• Entsorgen Sie dieses Produkt oder dessen Batterien niemals über den

normalen Hausmüll. Geben Sie es entsprechend den gesetzlichen

Regelungen vor Ort bei dem für das Recycling von WEEE vorgese-

henen Sammelpunkt ab. Damit helfen Sie, Ressourcen einzusparen

und die Umwelt zu schützen.

• In den meisten EU-Ländern gelten für die Entsorgung von Batterien

besondere Gesetze und Vorschriften. Weitere Informationen erhalten

Sie von Ihrem Händler oder den örtlichen Behörden.

• Der oben aufgeführte Text erscheint auf elektrischen und elektro-

nischen Geräten und Batterien (oder der Verpackung), um Nutzer

entsprechend zu erinnern. Wenn unter dem Symbol „Hg“ oder „Pb“

erscheint, bedeutet dies, dass die Batterie jeweils Spuren von Quecksil-

ber (Hg) oder Blei (Pb)enthält.

Cd