Whirlpool AKP 288/JA Guida utente

User and maintenance manual

Manuale d’uso e manutenzione

Návod k použití a údržbě

Návod na používanie a údržbu

Felhasználói és karbantartási kézikönyv

Руководство по эксплуатации

и техобслуживанию

IT

AKP 288

GB1

YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT

This manual and the appliance itself provide important safety warnings, to be read and observed at all times.

All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric

shock resulting from improper use of the appliance. Carefully observe the following instructions:

- The appliance must be disconnected from the power supply before carrying out any installation work.

- Installation and maintenance must be carried out by a qualified technician, in compliance with the manufacturer’s

instructions and local safety regulations. Do not repair or replace any part of the appliance unless specifically stated in the

user manual.

- Regulations require that the appliance is earthed.

- The power cable must be long enough for connecting the appliance, once fitted in its housing, to the power supply

socket.

- For installation to comply with current safety regulations, an all-pole disconnect switch with minimum contact gap of

3 mm must be utilized.

- Do not use multiple plug adapters or extension leads.

- Do not pull the power supply cable in order to unplug the appliance.

- The electrical components must not be accessible to the user after installation.

- Do not touch the appliance with any wet part of the body and do not operate it when barefoot.

- This appliance is designed solely for use as a domestic appliance for cooking food. No other type of use is permitted

(e.g.: heating rooms). The Manufacturer declines all responsibility for inappropriate use or incorrect setting of the controls.

- The appliance is not intended for use by persons (including children) with any physical, sensory or mental impairment, or

without experience and knowledge of the appliance, unless supervised or previously instructed in its use by those

responsible for their safety.

- The accessible parts of the appliance may become very hot during use. Young children should be kept away from the

appliance and supervised to ensure that they do not play with it.

- During and after use, do not touch the heating elements or interior surfaces of the appliance - risk of burns. Do not allow

the appliance to come into contact with cloths or other flammable materials until all the components have cooled

sufficiently.

- At the end of cooking, exercise caution when opening the appliance door, letting the hot air or steam exit gradually

before accessing the oven. When the appliance door is shut, hot air is vented from the aperture above the control panel.

Do not obstruct the vent apertures.

- Use oven gloves to remove pans and accessories, taking care not to touch the heating elements.

- Do not place flammable materials in or near the appliance: a fire may break out if the appliance is inadvertently switched

on.

- Do not heat or cook sealed jars or containers in the appliance. The pressure that builds up inside might cause the jar to

explode, damaging the appliance.

- Do not use containers made of synthetic materials.

- Overheated oils and fats catch fire easily. Always remain vigilant when cooking foods rich in fat and oil.

- Never leave the appliance unattended during food drying.

- If alcoholic beverages are used when cooking foods (e.g. rum, cognac, wine), remember that alcohol evaporates at high

temperatures. As a result, there is a risk that vapours released by the alcohol may catch fire upon coming into contact with

the electrical heating element.

Scrapping of household appliances

- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal

regulations. Before scrapping, cut off the power supply cable.

- For further information on the treatment, recovery and recycling of household electrical appliances, contact your

competent local authority, the collection service for household waste or the store where you purchased the appliance.

IMPORTANT SAFETY INSTRUCTIONS

This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others.

All safety warnings are preceded by the danger symbol and the following terms:

DANGER

Indicates a hazardous situation which, if not avoided, will cause serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could cause serious injury.

GB2

After unpacking the oven, make sure that it has not been damaged during transport and that the oven door closes properly. In

the event of problems, contact the dealer or your nearest After-sales Service. To prevent any damage, only remove the oven

from its polystyrene foam base at the time of installation.

PREPARING THE HOUSING UNIT

• Kitchen units in contact with the oven must be heat resistant (min 90°C).

• Carry out all cabinet cutting work before fitting the oven in the housing and carefully remove all wood chips and sawdust.

• After installation, the bottom of the oven must no longer be accessible.

• For correct appliance operation, do not obstruct the minimum gap between the worktop and the upper edge of the oven.

ELECTRICAL CONNECTION

Make sure the power voltage specified on the appliance dataplate is the same as the mains voltage. The dataplate is on the front

edge of the oven (visible when the door is open).

• Power cable replacement (type H05 RR-F 3 x 1.5 mm

2

) must be carried out by a qualified electrician. Contact an

authorized service centre.

GENERAL RECOMMENDATIONS

Before use:

- Remove cardboard protection pieces, protective film and adhesive labels from accessories.

- Remove the accessories from the oven and heat it at 200° for about an hour to eliminate the smell and fumes from the

insulating materials and protective grease.

During use:

- Do not place heavy objects on the door as they could damage it.

- Do not cling to the door or hang anything from the handle.

- Do not cover the inside of the oven with aluminium foil.

- Never pour water into the inside of a hot oven; this could damage the enamel coating.

- Never drag pots or pans across the bottom of the oven as this could damage the enamel coating.

- Make sure that the electrical cables of other appliances do not touch hot parts of the oven or become trapped in the door.

- Do not expose the oven to atmospheric agents.

Disposal of packing material

The packing material is 100% recyclable and is marked with the recycle symbol ( ). The various parts of the packing must

therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.

Scrapping the product

- This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and Electronic Equipment

(WEEE).

- By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

- The symbol on the product or on the accompanying documentation indicates that it should not be treated as

domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic

equipment.

Energy saving

- Only pre-heat the oven if specified in the cooking table or your recipe.

- Use dark lacquered or enamelled baking moulds as they absorb heat far better.

- Switch the oven off 10/15 minutes before the set cooking time. Food requiring prolonged cooking will continue to cook even

once the oven is switched off.

- This oven, which is intended to come into contact with foodstuffs, complies with European Regulation ( ) n.1935/2004

and has been designed, manufactured and sold in conformity with the safety requirements of the “Low Voltage” directive

2006/95/CE (which replaces 73/23/CEE and subsequent amendments), the protection requirements of “EMC” 2004/108/

CE.

INSTALLATION

SAFEGUARDING THE ENVIRONMENT

DECLARATION OF CONFORMITY

GB3

The oven does not work:

• Check for the presence of mains electrical power and if the oven is connected to the electrical supply.

• Turn off the oven and restart it to see if the fault persists.

Before calling the After-Sales Service:

1. See if you can solve the problem yourself with the help of the suggestions given in the “Troubleshooting guide“.

2. Switch the appliance off and back on again it to see if the fault persists.

If after the above checks the fault still occurs, get in touch with the nearest After-sales Service.

Always specify:

• a brief description of the fault;

• the type and exact model of the oven;

• the service number (number after the word Service on the rating plate), located on the right hand edge of the oven cavity

(visible when the oven door is open). The service number is also indicated on the guarantee booklet;

• your full address;

• your telephone number.

If any repairs are required, please contact an authorised After-sales Service (to guarantee that original spare parts will be used

and repairs carried out correctly).

Oven exterior

IMPORTANT: do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with

the appliance, clean immediately with a damp cloth.

• Clean the surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off

with a dry cloth.

Oven interior

IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin enamelled surfaces

and the oven door glass.

• After every use, allow the oven to cool then clean it preferably while it is still warm in order to remove built-up dirt and

stains caused by food residues (e.g. food with a high sugar content).

• Use proprietary oven detergents and follow the manufacturer’s instructions to the letter.

• Clean the door glass with a suitable liquid detergent. The oven door can be removed to facilitate cleaning (see

MAINTENANCE).

• The top heating element of the grill (see MAINTENANCE) can be lowered (some models only) to clean the roof of the oven.

N.B.: during prolonged cooking of foods with a high water content (e.g. pizza, vegetables, etc.) condensation may form

on the inside of the door and around the seal. When the oven is cold, dry the inside of the door with a cloth or sponge.

Accessories:

• Soak the accessories in water with washing up detergent immediately after use, handling them with oven gloves if still

hot.

• Food residues can be easily removed using a brush or sponge.

Cleaning the rear wall and catalytic side panels of the oven (if present):

IMPORTANT: do not use corrosive or abrasive detergents, coarse brushes, pot scourers or oven sprays which could

damage the catalytic surface and ruin its self-cleaning properties.

• Operate the oven empty with the fan-assisted function at 200°C for about one hour

• Next, leave the appliance to cool down before removing any food residue with a sponge.

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

CLEANING

WARNING

- Never use steam cleaning equipment.

- Only clean the oven when it is cool to the touch.

- Disconnect the appliance from the power supply.

GB4

REMOVING THE DOOR

To remove the door:

1. Open the door fully.

2. Lift the catches and push them forwards as far as they will go (Fig. 1).

3. Close the door as far as it will go (A), lift it up (B) and turn it (C) until it is released (D) (Fig. 2).

To refit the door:

1. Insert the hinges in their seats.

2. Open the door fully.

3. Lower the two catches.

4. Close the door.

MOVING THE TOP HEATING ELEMENT (SOME MODELS ONLY)

1. Remove the side accessory holder grilles (Fig. 3).

2. Pull the heating element out a little (Fig. 4) and lower it (Fig. 5).

3. To reposition the heating element, lift it up, pulling it slightly towards you, making sure it comes to rest on the lateral

supports.

MAINTENANCE

WARNING

- Use protective gloves.

- Ensure the oven is cold before carrying out the following operations.

- Disconnect the appliance from the power supply.

Fig. 1 Fig. 2

Fig. 3 Fig. 4 Fig. 5

GB5

REPLACING THE OVEN LAMP

To replace the rear lamp (if present):

1. Disconnect the oven from the power supply.

2. Unscrew the lamp cover (Fig. 6), replace the lamp (see note for lamp type) and screw the lamp cover back on.

3. Reconnect the oven to the power supply.

To replace the side lamp (if present):

1. Disconnect the oven from the power supply.

2. Remove the side accessory holder grilles, if present (Fig. 3).

3. Use a screwdriver to prise off the lamp cover (Fig. 7).

4. Replace the lamp (see note for lamp type) (Fig. 8).

5. Reposition the lamp cover, pushing it on firmly until it snaps into place (Fig. 9).

6. Refit the side accessory holder grilles.

7. Reconnect the oven to the power supply.

N.B.:

- Only use 25-40W/230V type E-14, T300°C incandescent lamps, or 20-40W/230 V type G9, T300°C halogen lamps.

- Lamps are available from our After-sales Service.

IMPORTANT:

- If using halogen lamps, do not handle with bare hands since fingerprints can damage them.

- Do not use the oven until the lamp cover has been repositioned.

Fig. 6 Fig. 7 Fig. 8 Fig. 9

GB6

FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION

1. Control panel

2. Upper heating element/grill

3. Cooling fan (not visible)

4. Dataplate (not to be removed)

5. Lamp

6. Fan

7. Turnspit (if present)

8. Lower heating element (not visible)

9. Door

10. Position of shelves (the number of shelves is indicated on the front of the oven)

11. Rear wall

N.B.:

- During cooking, the cooling fan may switch on at intervals in order to minimise energy consumption.

- At the end of cooking, after the oven has been switched off, the cooling fan may continue to run for a while.

ACCESSORIES SUPPLIED

A. WIRE SHELF (2): the wire shelf can be used to grill food or as a support for pans, cake tins and other ovenproof cooking

receptacles.

B. DRIP TRAY (1): the drip tray is designed to be positioned under the wire shelf in order to collect fat or as an oven tray for

cooking meat, fish, vegetables, focaccia, etc.

ACCESSORIES NOT SUPPLIED

Other accessories can be purchased separately from the After-sales Service.

INSTRUCTIONS FOR OVEN USE

Fig. A Fig. B

GB7

INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN

The wire shelf and other accessories are provided with a locking mechanism to prevent their unintentional removal.

1. Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1).

2. Angle the wire shelf when it reaches the locking position “B” (Fig. 2).

3. Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. 3).

4. To remove the wire shelf proceed in reverse order.

The other accessories, like the drip tray and baking tray, are inserted in exactly the same way. The protrusion on the flat surface

enables the accessories to lock in place.

CONTROL PANEL DESCRIPTION

1. Function selector knob

2. Analog clock

3. Thermostat knob

4. Thermostat led

OVEN OPERATION

• Turn the selector knob to the required function.

The oven light switches on.

• Turn the thermostat knob clockwise to the required temperature.

The thermostat led lights up, switching off again when the oven reaches the selected temperature.

At the end of cooking, turn the knobs to “0”.

Fig. 1

Fig. 2 Fig. 3

1 2 3 4

GB8

ANALOG CLOCK

A. MANUAL COOKING

1. Turn the button (B) anticlockwise (without pressing), until the symbol is displayed in the window .

2. Press the button (A) and turn it anticlockwise until the triangle (D) points to the time shown on the clock (hour hand).

The button clicks when turned to the proper position.

3. Turn the selector knob to the required symbol. The oven light switches on.

4. Turn the thermostat knob clockwise to the required temperature. The red thermostat indicator light switches on.

5. At the end of cooking, turn the knobs to OFF (0 - •) because in manual mode the oven will NOT switch off automatically.

B. MANUAL COOKING WITH COOKING START TIME

1. Turn the button (B) anticlockwise (without pressing), until the symbol is displayed in the window .

2. Press the button (A) and turn it anticlockwise until the triangle (D) points to the time at which cooking is to start (e.g. in

figure: 11:30).

3. Turn the selector knob to the required symbol.

4. Turn the thermostat knob clockwise to the required temperature.

5. At the end of cooking, turn the knobs to OFF (0 - •) because in manual mode the oven will NOT switch off automatically.

C. PROGRAMMED COOKING WITH COOKING START TIME AND COOKING DURATION

1. Turn the button (B) anticlockwise (without pressing) until the required cooking duration is displayed in the window (C)

(5 - 180 min.).

2. Press the button (A) and turn it anticlockwise until the triangle (D) points to the time at which cooking is to start (e.g. in

figure: 11:30).

3. Turn the selector knob to the required symbol.

4. Turn the thermostat knob clockwise to the required temperature.

5. At the end of the set cooking time an acoustic signal will sound and the oven will switch off automatically. To exclude

the acoustic signal, turn button (B) anticlockwise (without pressing) until the symbol is displayed in the window.

At the end of the set cooking time, cooking may be prolonged by following the instructions given above, or by using the

manual cooking procedure.

D. PROGRAMMED COOKING WITH COOKING DURATION

1. Turn the button (B) anticlockwise (without pressing) until the required cooking duration is displayed in the window (C)

(5 - 180 min.).

2. Press the button (A) and turn it anticlockwise until the triangle (D) points to the time shown on the clock (hour hand).

The button clicks when turned to the proper position.

3. Turn the selector knob to the required symbol. The oven light switches on.

4. Turn the thermostat knob clockwise to the required temperature. The red thermostat indicator light switches on.

5. At the end of the set cooking time an acoustic signal will sound and the oven will switch off automatically. To exclude

the acoustic signal, turn button (B)

anticlockwise (without pressing) until the symbol is displayed in the window.

At the end of the set cooking time, cooking may be prolonged by following the instructions given above, or by using the

manual cooking procedure.

The analog clock allows:

1. Viewing the time of the day. To adjust the time of the day, press the button (B) and turn it

anticlockwise to set the time.

2. Programming the cooking start time. The maximum programmed cooking start time is 12 hours.

Programming the cooking time. Select the cooking time (available with any function) to turn the oven on for

a specified period of time. At the end of the specified time the oven will switch off automatically. The

minimum programmed cooking time is 5 minutes and the maximum programmed cooking time is 180

minutes.

GB9

OVEN FUNCTION DESCRIPTION TABLE

FUNCTIONS KNOB

OFF To stop cooking and switch off the oven.

LAMP To switch the oven light on/off.

CONVENTIONAL

To cook any kind of dish on one shelf only. Use the 2nd shelf. Preheat the oven to the required

temperature. The thermostat led turns off when the oven is ready and food can be placed in it.

CONVECTION BAKE

For baking cakes with liquid filling (sweet or savoury) on a single shelf. This function can also be

used for cooking on two shelves. Switch the position of the dishes to cook food more evenly. Use

the 2nd shelf to cook on one shelf only, and the 2nd and 4th to cook on two shelves. Preheat the

oven before cooking.

GRILL

To grill steak, kebabs and sausages; to cook vegetables au gratin and toast bread. Place food on

the 4th shelf. When grilling meat, use the drip tray to collect the cooking juices. Position it on the

3rd shelf, adding approx. half a litre of water. Preheat the oven for 3-5 min. During cooking the

oven door must remain closed.

TURBO GRILL

To roast large joints of meat (legs, roast beef, chickens). Position the food on the middle shelves.

Use the drip tray to collect the cooking juices. Position it on the 1st/2nd shelf, adding approx. half a

litre of water. It is advisable to turn the meat over during cooking for more even browning. The

oven does not have to be preheated. During cooking the oven door must remain closed.

DEFROST

To speed up defrosting of food. Place food on the middle shelf. Leave food in its packaging in order

to prevent it from drying out on the outside.

BOTTOM HEATING

Use this function after cooking to brown the bottom of the dish. It is advisable to place the food

on the 1st /2nd cooking level. The function can also be used for slow cooking, such as vegetables

and meat stews; in this case use the 2nd cooking level. The oven does not have to be preheated.

FORCED AIR

Also to cook different types of food requiring the same cooking temperature (e.g. fish, vegetables,

cakes) on a maximum of two shelves at the same time. This function allows cooking without

odours being transferred from one food to another. It is advisable to use the 2nd level to cook on a

single shelf. To cook on two shelves, it is advisable use the 1st and 3rd levels, preheating the oven

first.

SPECIAL

Function for baking homemade pizzas. Use the 2nd shelf. Preheat the oven, turning the

temperature knob to the icon ; insert the food when the set temperature is reached.

Function for baking homemade bread. Use the 2nd shelf. Preheat the oven, turning the

temperature knob to the icon ; insert the food when the set temperature is reached.

Function ideal for keeping just-cooked food (e.g. meat, fried food, flans) hot and crisp. Turn the

temperature knob to the icon .

GB10

COOKING TABLE

Recipe

Function Preheating Shelf

(from bottom)

Temperature

(°C)

Time

(min)

Accessories

Leavened cakes

Yes 2 150-175 35-90 Cake tin on wire shelf

Yes 1-3 150-170 30-90

Shelf 3: cake tin on wire shelf

Shelf 1: cake tin on wire shelf

Filled pies

(cheesecake, strudel,

apple pie)

Yes 2 150-190 30-85

Drip tray/ baking tray or cake tin on

wire shelf

Yes 1-3 150-190 35-90

Shelf 3: cake tin on wire shelf

Shelf 1: cake tin on wire shelf

Biscuits/Tartlets

Yes 2 160-175 20-45 Drip tray / baking tray

Yes 1-3 150-175 20-45

Shelf 3: wire shelf

Shelf 1: drip tray / baking tray

Choux buns

Yes 2 175-200 30-40 Drip tray / baking tray

Yes 1-3 170-190 35-45

Shelf 3: oven tray on wire shelf

Shelf 1: drip tray / baking tray

Meringues

Yes 2 100 110-150 Drip tray / baking tray

Yes 1-3 100 130-150

Shelf 3: oven tray on wire shelf

Shelf 1: drip tray / baking tray

Bread / Pizza /

Focaccia

Yes 2 190-250 12-50 Drip tray / baking tray

Yes 1-3 190-250 25-50

Shelf 1: oven tray on wire shelf

Shelf 3: drip tray / baking tray

Pizza Yes 2 250 10-30

Drip tray / baking tray / oven tray on

wire shelf

Pane Yes 2 200 25-55

Drip tray / baking tray / oven tray on

wire shelf

Frozen pizza

Yes 2 250 10-15

Shelf 1: Drip tray / baking tray or wire

shelf

Yes 1-3 250 10-20

Shelf 3: oven tray on wire shelf

Shelf 1: drip tray / baking tray

Savoury pies

(vegetable pie,

quiche)

Yes 2 175-200 40-50 Cake tin on wire shelf

Yes 1-3 175-190 55-65

Shelf 3: cake tin on wire shelf

Shelf 1: cake tin on wire shelf

Vols-au-vent / Puff

pastry crackers

Yes 2 175-200 20-30 Drip tray / baking tray

Yes 1-3 175-200 25-45

Shelf 3: oven tray on wire shelf

Shelf 1: drip tray / baking tray

GB11

The times given in the table are for cooking done with delayed start mode (if available). Cooking times may be longer,

depending on the dish.

Lasagne / Baked

pasta / Cannelloni /

Flans

Yes 2 200 45-55 Oven tray on wire shelf

Lamb / Veal / Beef /

Pork 1 Kg

Yes 2 200 80-110 Drip tray or oven tray on wire shelf

Chicken / Rabbit /

Duck 1 Kg

Yes 2 200 50-100 Drip tray or oven tray on wire shelf

Turkey / Goose 3 Kg Yes 1/2 200 80-130 Drip tray or oven tray on wire shelf

Baked fish / en

papillote (fillet,

whole)

Yes 2 175-200 40-60 Drip tray or oven tray on wire shelf

Stuffed vegetables

(tomatoes,

courgettes,

aubergines)

Yes 2 175-200 50-60 Oven tray on wire shelf

Toast Yes 4 200 2-5 grill

Fish fillets / steaks Yes 4 200 20-30

Shelf 4: wire shelf (turn food halfway

through cooking)

Shelf 3: drip tray with water

Sausages / Kebabs /

Spare ribs /

Hamburgers

Yes 4 200 30-40

Shelf 4: wire shelf (turn food halfway

through cooking)

Shelf 3: drip tray with water

Roast chicken

1-1.3 Kg

- 2 200 55-70

Shelf 2: wire shelf (turn food two thirds

of the way through cooking if

necessary)

Shelf 1: drip tray with water

Roast chicken

1-1.3 Kg

- 2 200 60-80

Shelf 2: turnspit

Shelf 1: drip tray with water

Roast Beef rare 1 Kg - 2 200 35-45

Oven tray on wire shelf (turn food two

thirds of the way through cooking if

necessary)

Leg of lamb / Shanks - 2 200 60-90

Drip tray or oven tray on wire shelf (turn

food two thirds of the way through

cooking if necessary)

Roast potatoes - 2 200 45-55

Drip-tray / baking tray (if necessary,

turn food two thirds of the way through

cooking)

Vegetable gratin - 2 200 20-30 Oven tray on wire shelf

Lasagna & Meat Yes 1-3 200 50-100

Shelf 3: oven tray on wire shelf

Shelf 1: drip tray or oven tray on wire

shelf

Meat & Potatoes Yes 1-3 200 45-100

Shelf 3: oven tray on wire shelf

Shelf 1: drip tray or oven tray on wire

shelf

Fish & Vegetables Yes 1-3 175 30-50

Shelf 3: oven tray on wire shelf

Shelf 1: drip tray or oven tray on wire

shelf

Recipe

Function Preheating Shelf

(from bottom)

Temperature

(°C)

Time

(min)

Accessories

GB12

How to read the cooking table

The table indicates the best function to use for any given food, to be cooked on one or more shelves at the same time. Cooking

times start from the moment food is placed in the oven, excluding pre-heating (where required). Cooking temperatures and

times are purely for guidance and will depend on the amount of food and type of accessory used. Use the lowest recommended

values to begin with and, if the food is not cooked enough, then move on to higher values. Use the accessories supplied and

preferably dark coloured metal cake tins and oven trays. You can also use pans and accessories in pyrex or stoneware, but bear

in mind that cooking times will be slightly longer. To obtain best results, carefully follow the advice given in the cooking table

for the choice of accessories (supplied) to be placed on the various shelves.

Cooking different foods at the same time

Using the “CONVECTION BAKE” function, you can cook different foods which require the same cooking temperature at the same

time (for example: fish and vegetables), using different shelves. Remove the food which requires less cooking time and leave

food which requires longer cooking time in the oven.

Desserts

- Cook delicate desserts with the conventional function on one shelf only. Use dark coloured metal cake tins and always

position them on the wire shelf supplied. To cook on more than one shelf, select the forced air function and stagger the

position of the cake tins on the shelves, aiding optimum circulation of the hot air.

- To check whether a raising cake is cooked, insert a wooden toothpick into the centre of the cake. If the toothpick comes

out clean, the cake is ready.

- If using non-stick cake tins, do not butter the edges as the cake may not rise evenly around the edges.

- If the cake “sinks” during cooking, set a lower temperature the next time, perhaps reducing the amount of liquid in the

mixture and mixing more gently.

- For sweets with moist fillings (cheesecake or fruit pies) use the “CONVECTION BAKE” function. If the base of the cake is

soggy, lower the shelf and sprinkle the bottom of the cake with breadcrumbs or biscuit crumbs before adding the filling.

Meat

- Use any kind of oven tray or pyrex dish suited to the size of the piece of meat being cooked. For roast joints, it is best to

add some stock to the bottom of the pan, basting the meat during cooking for added flavour. When the roast is ready, let

it rest in the oven for another 10-15 minutes, or wrap it in aluminium foil.

- When you want to grill meat, choose cuts with an even thickness all over in order to achieve uniform cooking results. Very

thick pieces of meat require longer cooking times. To prevent the meat from burning on the outside, lower the position of

the wire shelf, keeping the food farther away from the grill. Turn the meat two thirds of the way through cooking.

To collect the cooking juices it is advisable to place a drip-tray with half a litre of water directly under the grill on which the meat

is placed. Top-up when necessary.

Turnspit (only in some models)

Use this accessory to evenly roast large pieces of meat and poultry. Place the meat on the turnspit rod, tying it with string if

chicken, and check that it is secure before inserting the rod in the seat located on the front wall of the oven and resting it on the

respective support. To prevent smoke and to collect cooking juices, it is advisable to place a drip-tray with half a litre of water on

the first level. The rod has a plastic handle which must be removed before starting to cook, and used at the end of cooking to

avoid burns when taking the food out of the oven.

Pizza

Lightly grease the trays to ensure the pizza has a crispy base. Scatter the mozzarella over the pizza two thirds of the way through

cooking.

RECOMMENDED USE AND TIPS

IT13

LA SICUREZZA VOSTRA E DEGLI ALTRI È MOLTO IMPORTANTE

Il presente manuale e l’apparecchio stesso sono corredati da importanti messaggi relativi alla sicurezza, da leggere ed osservare

sempre.

Tutti i messaggi relativi alla sicurezza specificano il potenziale pericolo a cui si riferiscono ed indicano come ridurre il rischio di

lesioni, danni e scosse elettriche conseguenti ad un non corretto uso dell’apparecchio. Attenersi scrupolosamente alle seguenti

istruzioni:

- L’apparecchio deve essere scollegato dalla rete elettrica prima di effettuare qualunque intervento d’installazione.

- L’installazione o la manutenzione deve essere eseguita da un tecnico specializzato, in conformità alle istruzioni del

fabbricante e nel rispetto delle norme locali vigenti in materia di sicurezza. Non riparare o sostituire qualsiasi parte

dell’apparecchio se non specificamente richiesto nel manuale d’uso.

- La messa a terra dell’apparecchio è obbligatoria.

- Il cavo di alimentazione deve essere sufficientemente lungo da permettere il collegamento dell’apparecchio, incassato nel

mobile, alla presa di rete.

- Affinché l’installazione sia conforme alle norme di sicurezza vigenti, occorre un interruttore onnipolare avente una

distanza minima di 3 mm. tra i contatti.

- Non utilizzare prese multiple o prolunghe.

- Non tirare il cavo di alimentazione dell’apparecchio per staccarlo dalla presa di corrente.

- Una volta terminata l’installazione, i componenti elettrici non dovranno più essere accessibili dall’utilizzatore.

- Non toccare l’apparecchio con parti del corpo umide e non utilizzarlo a piedi nudi.

- L’apparecchio è destinato esclusivamente ad uso domestico per la cottura di alimenti. Non sono consentiti altri usi (es.

riscaldare ambienti). Il fabbricante declina ogni responsabilità per usi non appropriati o per errate impostazioni dei

comandi.

- L’utilizzo dell’apparecchio non è consentito alle persone (inclusi i bambini) con ridotte capacità fisiche, sensoriali o

mentali, o con mancanza di esperienza o conoscenza, a meno che non abbiano avuto istruzioni riguardanti l’uso

dell’apparecchio da parte di persone responsabili della loro sicurezza.

- Le parti accessibili possono diventare molto calde durante l’uso. I bambini devono essere mantenuti a distanza e

sorvegliati affinchè non giochino con l’apparecchio.

- Durante e dopo l’uso non toccare gli elementi riscaldanti o le superfici interne dell’apparecchio perché possono causare

ustioni. Evitare il contatto con panni o altro materiale infiammabile fino a che tutti i componenti dell’apparecchio non si

siano sufficientemente raffreddati.

- A fine cottura, aprire la porta dell’apparecchio con cautela, facendo uscire gradualmente l’aria calda o il vapore prima di

accedere al suo interno. Con la porta dell’apparecchio chiusa, la fuoriuscita dell’aria calda avviene dall’apertura posta al di

sopra del pannello comandi. Non ostruire in nessun caso le aperture di ventilazione.

- Usare guanti da forno per rimuovere pentole e accessori facendo attenzione a non toccare gli elementi riscaldanti.

- Non riporre materiale infiammabile nell’apparecchio o nelle sue vicinanze. Se l’apparecchio dovesse essere messo in

funzione inavvertitamente, potrebbe incendiarsi.

- Non riscaldare o cuocere nell’apparecchio cibi in barattoli chiusi. La pressione che si sviluppa all’interno potrebbe far

scoppiare il barattolo, danneggiando l’apparecchio.

- Non usare recipienti in materiale sintetico.

- I grassi e gli oli surriscaldati prendono facilmente fuoco. Sorvegliare la cottura di alimenti ricchi di grasso e di olio.

- Non lasciare mai l’apparecchio incustodito durante l’essiccazione dei cibi.

- Se nel cuocere cibi si aggiungono bevande alcoliche (ad es. rum, cognac, vino), tenere presente che l’alcool evapora a

temperature elevate. Non è quindi escluso che i vapori generati possano infiammarsi giungendo a contatto con la

resistenza elettrica.

Smaltimento elettrodomestici

- Questo prodotto è stato fabbricato con materiale riciclabile o riutilizzabile. Rottamarlo seguendo le normative locali per lo

smaltimento dei rifiuti. Prima di disfarsene, renderlo inutilizzabile tagliando il cavo di alimentazione.

- Per ulteriori informazioni sul trattamento, recupero e riciclaggio degli elettrodomestici, contattare l’idoneo ufficio locale, il

servizio di raccolta dei rifiuti domestici o il negozio presso il quale il prodotto è stato acquistato.

ISTRUZIONI IMPORTANTI PER LA SICUREZZA

Questo è il simbolo di pericolo, relativo alla sicurezza, il quale avverte dei potenziali rischi per l’utilizzatore e per gli altri.

Tutti i messaggi relativi alla sicurezza saranno preceduti dal simbolo di pericolo e dai seguenti termini:

PERICOLO

Indica una situazione pericolosa che, se non evitata, provoca lesioni gravi.

AVVERTENZA

Indica una situazione pericolosa che, se non evitata, potrebbe provocare lesioni gravi.

IT14

Dopo aver disimballato il forno verificare che non si sia danneggiato durante il trasporto e che la porta si chiuda perfettamente.

In caso di problemi, contattare il rivenditore o il Servizio Assistenza Clienti. Per prevenire eventuali danni, si consiglia di

rimuovere il forno dalla base in polistirolo soltanto prima dell’installazione.

PREDISPOSIZIONE DEL MOBILE PER INCASSO

• I mobili della cucina adiacenti al forno devono resistere al calore (min 90°C).

• Eseguire tutti i lavori di taglio del mobile prima di inserire il forno e rimuovere accuratamente trucioli o residui di segatura.

• La parte inferiore del forno non deve più essere accessibile dopo l’installazione.

• Per un corretto funzionamento del prodotto non ostruire l’apertura minima tra piano di lavoro e il lato superiore del forno.

CONNESSIONE ALLA RETE ELETTRICA

Controllare che la tensione indicata sulla targhetta matricola del prodotto sia la stessa della rete elettrica. Essa si trova sul bordo

anteriore del forno (visibile quando la porta è aperta).

• Eventuali sostituzioni del cavo di alimentazione (tipo H05 RR-F 3 x 1,5 mm

2

) devono essere effettuate unicamente da

personale qualificato. Rivolgersi ai centri di assistenza autorizzati.

RACCOMANDAZIONI GENERALI

Prima dell’utilizzo:

- Rimuovere protezioni di cartone, pellicole trasparenti ed etichette adesive dagli accessori.

- Togliere gli accessori dal forno e riscaldarlo a 200° per un’ora circa in modo da eliminare odori e fumi derivanti da

materiale isolante e grassi di protezione.

Durante l’utilizzo:

- Non appoggiare pesi sulla porta in quanto essi potrebbero danneggiarla.

- Non aggrapparsi alla porta o appendere oggetti alla maniglia.

- Non ricoprire l’interno del forno con fogli di alluminio.

- Non versare mai acqua all’interno del forno caldo; lo smalto potrebbe danneggiarsi.

- Non trascinare sul fondo del forno pentole o tegami per non rovinare lo smalto.

- Accertarsi che i cavi elettrici di altri apparecchi non vadano a toccare le parti calde del forno o ad incastrarsi nella porta.

- Non esporre il forno agli agenti atmosferici.

Smaltimento imballaggio

Il materiale di imballaggio è riciclabile al 100% ed è contrassegnato dal simbolo di riciclaggio ( ). Le diverse parti

dell’imballaggio non devono essere disperse nell’ambiente, ma smaltite in conformità alle norme stabilite dalle autorità locali.

Smaltimento prodotto

- Questo apparecchio è contrassegnato in conformità alla Direttiva Europea 2002/96/EC, Waste Electrical and Electronic

Equipment (WEEE).

- Assicurandosi che questo prodotto sia smaltito in modo corretto, l’utente contribuisce a prevenire le potenziali

conseguenze negative per l’ambiente e la salute.

- Il simbolo sul prodotto o sulla documentazione di accompagnamento indica che questo prodotto non deve essere

trattato come rifiuto domestico, ma deve essere consegnato presso l’idoneo punto di raccolta per il riciclaggio di

apparecchiature elettriche ed elettroniche.

Risparmio energetico

- Preriscaldare l’apparecchio solo se indicato nella tabella di cottura o nella vostra ricetta.

- Usare stampi da forno scuri, laccati o smaltati, perché assorbono molto meglio il calore.

- Spegnere il forno 10/15 minuti prima del tempo totale di cottura impostato. Nel caso di cibi che richiedono tempi lunghi,

questi continueranno comunque a cuocere.

- Questo apparecchio, destinato ad entrare a contatto con prodotti alimentari, è conforme al regolamento ( ) n.1935/

2004 ed è stato progettato, costruito ed immesso sul mercato in conformità ai requisiti di sicurezza della direttiva “Bassa

Tensione”2006/95/CE (che sostituisce la 73/23/CEE e successivi emendamenti), requisiti di protezione della direttiva

“EMC” 2004/108/CE.

INSTALLAZIONE

CONSIGLI PER LA SALVAGUARDIA DELL’AMBIENTE

DICHIARAZIONE DI CONFORMITÀ

IT15

Il forno non funziona:

• Verificare che ci sia tensione in rete e che il forno sia connesso elettricamente.

• Spegnere e riaccendere il forno, per accertare che l’inconveniente sia stato ovviato.

Prima di contattare il Servizio Assistenza:

1. Verificare che non sia possibile risolvere da soli il problema sulla base dei punti descritti in “Guida ricerca guasti”.

2. Spegnere e riaccendere l’apparecchio per accertarsi che l’inconveniente sia stato ovviato.

Se dopo i suddetti controlli l’inconveniente permane, contattare il Servizio Assistenza più vicino.

Indicare sempre:

• una breve descrizione del guasto;

• il tipo e il modello esatto del forno;

• il numero Assistenza (è il numero che si trova dopo la parola Service sulla targhetta matricola), posto sul bordo interno

destro della cavità del forno (visibile a porta aperta). Il numero Assistenza è anche riportato sul libretto di garanzia;

• il vostro indirizzo completo;

• il vostro numero telefonico.

Qualora si renda necessaria una riparazione, rivolgersi ad un Centro di Assistenza Tecnica autorizzato (a garanzia dell’utilizzo

di pezzi di ricambio originali e di una corretta riparazione).

Esterno del forno

IMPORTANTE: non usare detergenti corrosivi o abrasivi. Se, inavvertitamente, uno di questi prodotti dovesse venire a

contatto con l’apparecchio, pulirlo subito con un panno umido.

• Pulire con panno umido le superfici. Se molto sporco, aggiungere all’acqua qualche goccia di detersivo per i piatti.

Asciugare con panno asciutto.

Interno del forno

IMPORTANTE: Non utilizzare spugne abrasive, pagliette o raschietti metallici. Il loro impiego, col tempo, potrebbe

rovinare le superfici smaltate e il vetro della porta.

• Dopo ogni uso, lasciare raffreddare il forno e pulirlo preferibilmente quando è ancora tiepido per rimuovere incrostazioni

e macchie dovute a residui di cibo (es. alimenti ad alto contenuto di zucchero).

• Usare detergenti specifici per la pulizia del forno ed attenersi alle indicazioni del Fabbricante.

• Pulire il vetro della porta con detergenti liquidi specifici. Per facilitare la pulizia della porta è possibile rimuoverla (vedi

MANUTENZIONE).

• La resistenza superiore del grill (vedi MANUTENZIONE) è abbassabile (solo in alcuni modelli) per pulire la parte superiore

dell’interno dell’apparecchio.

NOTA: durante le cotture prolungate di alimenti ricchi di acqua (es. pizza, verdure, ecc.) è possibile la formazione di

condensa all’interno della porta e sulla guarnizione. A forno freddo, asciugare con un panno o una spugna.

Accessori:

• Mettere a bagno gli accessori con detersivo per piatti dopo l’uso, maneggiandoli con guanti da forno, se ancora caldi.

• I residui di cibo possono essere rimossi con una idonea spazzola o con una spugna.

Pulizia della paratia posteriore e dei pannelli laterali catalitici (se in dotazione):

IMPORTANTE: non usare detergenti corrosivi o abrasivi, spazzole ruvide, spugne per pentole o spray per forno che

potrebbero danneggiare la superficie catalitica, facendole perdere le sue proprietà autopulenti.

• Far funzionare il forno a vuoto ad una temperatura di 200°C per circa un’ora con la funzione ventilato.

• Al termine, lasciare raffreddare l’apparecchio ed usare una spugna per rimuovere eventuali residui di cibo.

GUIDA RICERCA GUASTI

SERVIZIO ASSISTENZA

PULIZIA

AVVERTENZA

- Non usare assolutamente pulitrici a getto di vapore.

- Effettuare la pulizia ad apparecchio freddo.

- Scollegare l’apparecchio dalla rete elettrica.

IT16

RIMOZIONE DELLA PORTA

Per togliere la porta:

1. Aprire completamente la porta.

2. Sollevare le levette di arresto delle cerniere in avanti fino al fermo (Fig. 1).

3. Chiudere la porta fino al bloccaggio (A), sollevarla (B) e ruotarla (C) fino allo sganciamento della stessa (D) (Fig. 2).

Per riposizionare la porta:

1. Inserire le cerniere nelle apposite sedi.

2. Aprire completamente la porta.

3. Abbassare le due levette di arresto.

4. Chiudere la porta.

SPOSTAMENTO DELLA RESISTENZA SUPERIORE (SOLO PER ALCUNI MODELLI)

1. Rimuovere le griglie porta accessori laterali (Fig. 3).

2. Estrarre leggermente la resistenza (Fig. 4) e abbassarla (Fig. 5).

3. Per riposizionare la resistenza, sollevarla, tirandola leggermente verso di sè, assicurandosi che appoggi sulle apposite sedi

laterali.

MANUTENZIONE

AVVERTENZA

- Utilizzare guanti protettivi.

- Eseguire le operazioni indicate ad apparecchio freddo.

- Scollegare l’apparecchio dalla rete elettrica.

Fig. 1 Fig. 2

Fig. 3 Fig. 4 Fig. 5

IT17

SOSTITUZIONE DELLA LAMPADA

Per sostituire la lampada posteriore (se in dotazione):

1. Scollegare il forno dalla rete elettrica.

2. Svitare il copri-lampada (Fig. 6), sostituire la lampada (per il tipo vedere nota) e riavvitare il copri-lampada.

3. Ricollegare il forno alla rete elettrica.

Per sostituire la lampada laterale (se in dotazione):

1. Scollegare il forno dalla rete elettrica.

2. Rimuovere le griglie porta accessori laterali, se in dotazione (Fig. 3).

3. Fare leva verso l’esterno con un cacciavite a taglio fino a rimuovere il coprilampada (Fig. 7).

4. Sostituire la lampada (per il tipo vedere nota) (Fig. 8).

5. Riposizionare il coprilampada e spingerlo contro la parete per agganciarlo correttamente (Fig. 9).

6. Rimontare le griglie porta accessori laterali.

7. Ricollegare il forno alla rete elettrica.

NOTA:

- Usare solo lampade ad incandescenza da 25-40W/230V tipo E-14, T300°C, o lampade alogene da 20-40W/230 V tipo G9,

T300°C.

- Le lampade sono disponibili presso i Servizi Assistenza Clienti.

IMPORTANTE:

- In caso di impiego di lampade alogene, non maneggiarle a mani nude, per evitare che vengano danneggiate dalle

impronte digitali.

- Non far funzionare il forno senza prima aver riposizionato il coprilampada.

Fig. 6 Fig. 7 Fig. 8 Fig. 9

IT18

PER IL COLLEGAMENTO ELETTRICO CONSULTARE LA PARTE RELATIVA ALL’INSTALLAZIONE

1. Pannello comandi

2. Resistenza superiore/grill

3. Ventola raffreddamento (non visibile)

4. Targhetta matricola (da non rimuovere)

5. Lampada

6. Ventola

7. Girarrosto (se in dotazione)

8. Resistenza inferiore (non visibile)

9. Porta

10. Posizione dei ripiani (il numero di livello è indicato sul frontale del forno)

11. Paratia

NOTA:

- Durante la cottura, è possibile che la ventola di raffreddamento si attivi ad intermittenza per ridurre il consumo

energetico.

- A fine cottura, dopo lo spegnimento del forno, la ventola di raffreddamento può continuare a funzionare per un certo

intervallo di tempo.

ACCESSORI IN DOTAZIONE

A. GRIGLIA (2): da usare per la cottura di cibi o come supporto per pentole, tortiere o qualunque recipiente adatto alla

cottura in forno.

B. LECCARDA (1): da usare, posizionata sotto la griglia, per raccogliere grasso o come piastra per cuocere carni, pesci,

verdure, focacce, etc.

ACCESSORI NON IN DOTAZIONE

È possibile acquistare separatamente altri accessori presso il Servizio Assistenza Clienti.

ISTRUZIONI PER L’USO DEL FORNO

Fig. A Fig. B

La pagina sta caricando ...

Whirlpool AKP 288/JA Guida utente

Questo manuale è adatto anche per

Whirlpool AKP 288/JA Guida utente

in altre lingue

Documenti correlati

Altri documenti