entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. For warranty service,
find the nearest Authorized Service Dealer in our dealer locator
map at BRIGGSandSTRATTON.COM, or by calling 1300 274
447, or by emailing or writing to
Australia Pty Ltd, 1 Moorebank Avenue, NSW, Australia, 2170.
The warranty period begins on the date of purchase by the first
retail or commercial consumer. “Consumer use” means personal
residential household use by a retail consumer. “Commercial
use” means all other uses, including use for commercial, income
producing or rental purposes. Once a product has experienced
commercial use, it shall thereafter be considered as a
commercial use product for purposes of this warranty.
Save your proof of purchase receipt. If you do not provide proof
of the initial purchase date at the time warranty service is
requested, the manufacturing date of the product will be used
to determine the warranty period. Product registration is not
required to obtain warranty service on Briggs & Stratton
products.
About Your Warranty
Warranty service is available only through Murray® Authorized
Service Dealers. This warranty covers only defects in materials
or workmanship. It does not cover damage caused by improper
use or abuse, improper maintenance or repair, normal wear
and tear, or stale or unapproved fuel.
Improper Use and Abuse - The proper, intended use of this
product is described in the Operator’s Manual. Using the product
in a way not described in the Operator’s Manual or using the
product after it has been damaged will not be covered under
this warranty. Warranty coverage will also not be provided if the
serial number on the product has been removed or the product
has been altered or modified in any way, or if the product has
evidence of abuse such as impact damage or water/chemical
corrosion damage.
Improper Maintenance or Repair - This product must be
maintained according to the procedures and schedules provided
in the Operator’s Manual, and serviced or repaired using genuine
Briggs & Stratton parts or equivalent. Damage caused by lack
of maintenance or use of non-original parts is not covered by
warranty.
Normal Wear and Tear - Like most mechanical devices, your
unit is subject to wear even when properly maintained. This
warranty does not cover repairs when normal use has exhausted
the life of a part or the equipment. Maintenance and wear items
such as filters, belts, cutting blades, and brake pads (except
engine brake pads) are not covered by warranty due to wear
characteristics alone, unless the cause is due to defects in
material or workmanship.
Stale or Unapproved Fuel - In order to function correctly, this
product requires fresh fuel that conforms to the criteria specified
in the Operator’s Manual. Engine or equipment damage caused
by stale fuel or the use of unapproved fuels (such as E15 or
E85 ethanol blends) is not covered by warranty.
Other Exclusions - This warranty excludes damage due to
accident, abuse, modifications, alterations, improper servicing,
freezing or chemical deterioration. Attachments or accessories
that were not originally packaged with the product are also
excluded. There is no warranty coverage on equipment used
for primary power in place of utility power or on equipment used
in life support applications. This warranty does not include used,
reconditioned, second-hand, or demonstration equipment or
engines. This warranty also excludes failures due to acts of God
and other force majeure events beyond the manufacturer’s
control.
80006005EN (Rev A)
Emissions Warranty
California, U.S. EPA, and Briggs & Stratton
Corporation Emissions Control Warranty
Statement
For Briggs & Stratton Engine Models with “B” or “G” Trim
Designation
(Model-Type-Trim Representation xxxxxx xxxx Bx or xxxxxx
xxxx Gx)
The California Air Resources Board, U.S. EPA, and Briggs &
Stratton (B&S) are pleased to explain the emissions control
system warranty on your 2017-2019 engine. In California, new
small off-road engines and large spark ignited engines less than
or equal to 1.0 liter must be designed, built, and equipped to
meet the State’s stringent anti-smog standards. B&S must
warrant the emissions control system on your engine for the
periods of time listed below provided there has been no abuse,
neglect, or improper maintenance of your engine.
Your exhaust emissions control system may include parts such
as the carburetor or fuel injection system, ignition system, and
catalytic converter. Also included may be hoses, belts,
connectors, sensors, and other emissions-related assemblies.
Where a warrantable condition exists, B&S will repair your
engine at no cost to you including diagnosis, parts, and labor.
Manufacturer’s Warranty Coverage:
Small off-road engines and large spark ignited engines less
than or equal to 1.0 liter, are warranted for two years, or for the
time period listed in the respective engine or product warranty
statement, whichever is greater. If any emissions-related part
on your B&S engine is defective, the part will be repaired or
replaced by B&S.
Owner’s Warranty Responsibilities:
• As the engine owner, you are responsible for the
performance of the required maintenance listed in your
Operator’s Manual. B&S recommends that you retain all
receipts covering maintenance on your engine, but B&S
cannot deny warranty solely for the lack of receipts or your
failure to ensure the performance of all scheduled
maintenance.
3