Hitachi DZ-MV4000E Manuale utente

DZ-MV4000E (UK)

Instruction manual

To obtain the best performance and ensure years of

trouble-free use, please read this instruction

manual completely.

Printed on recycled paper

This manual was printed

with soy based ink.

FOR TECHNICAL HELP & SERVICE PLEASE CALL

0870 405 4405

FOR DVD-CAM PC SUPPORT YOU CAN ALSO VISIT OUR WEB SITE

http://dvdcam-pc.support.hitachi.ca/

2

Important Information

For Your Safety

The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the

camera/recorder is to be left unattended for a long period of time, turn it off.

The DVD video camera/recorder and AC

adapter/charger have the following caution

marks.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Identifications of caution marks

Precautions

WARNING: Many television programmes and

films are copyrighted. In certain circumstances,

copy-right law may apply to private in-home

videotaping of copyrighted materials.

WARNING: To prevent risk of injury or damage

to your DVD video camera/recorder and the AC

adapter/charger, use only the DZ-BP07PW/DZ-

BP14SW/DZ-BP7SW battery and DZ-ACS3 (E)

AC adapter/charger.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE

RECOMMENDED ACCESSORIES ONLY.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol warns the user that

uninsulated voltage within the unit

may have sufficient magnitude to cause

electric shock. Therefore, it is dangerous

to make any kind of contact with any

inside part of this unit.

This symbo l a

lerts the user that

important literature concerning the

operation and maintenance of this unit

has been included. Therefore, it should

be read carefully to avoid any

problems.

The liquid crystal display (LCD) pa nel is

made by highly precise technology. More than

99.99% of its picture elements (pixels) are

effective, but some (less than 0.01%) may

appear as coloured bright dots. This does not

indicate a

fault as the LCD panel stretches the

limits of current technology.

CLASS 1

LASER PRODUCT

CAUTION

This product contains a laser diode of higher

class than 1. To ensure continued safety, do

not remove any covers or attempt to gain

access to the inside of the product. Refer all

servicing to qualified personnel.

3

Information for users applicable in European Union countries

This symbol on the product or on its packaging means that your electrical and electronic

equipment should be disposed at the end of life separately from your household wastes.

There are separate collection systems for recycling in EU.

For more information, please contact the local authority or the dealer where you

purchased the product.

Information für Nutzer in den Ländern der Europäischen Union

Das auf dem Produkt oder auf der Verpackung angebrachte Symbol bedeutet, dass Ihre

elektrischen und elektronischen Geräte nicht mit dem Haushaltsmüll entsorgt werden

sollen. Es existieren separate Recycling-Sammelsysteme in der EU.

Für mehr Informationen wenden Sie sich bitte an Ihre örtlichen Behörden oder an den

Fachhändler, bei dem Sie das Produkt erworben haben.

Information utilisateurs, applicable dans les pays de l’Union Européenne

Ce symbole figurant sur le produit ou son emballage signifie que votre équipement

électrique et électronique doit être mis au rebut séparément de vos déchets ménagers

lorsqu’il a atteint la fin de sa durée de vie.

Il existe des systèmes de collecte séparée pour le recyclage dans l’UE.

Pour plus d’informations, veuillez prendre contact avec les autorités locales ou le

revendeur auquel vous avez acheté ce produit.

Informatie voor gebruikers in landen van de Europese Unie

Dit symbool op het product of op zijn verpakking betekent dat uw elektrische of

elektronische apparatuur na het verstrijken van de levensduur gescheiden van het

huisvuil moet worden weggegooid.

Er zijn afzonderlijke ophaalsystemen voor recyclage in de E.U.

Voor meer informatie neemt u contact op met de plaatselijke overheid of de dealer waar u

het product hebt gekocht.

Information till användare inom Europeiska unionen

Märkningen av produkter och förpackningar med denna symbol betyder att elektrisk och

elektronisk utrustning måste tas om hand separat från hushållssopor när utrustningen har

förbrukats. EU har särskilda återvinningsanläggningar för denna typ av utrustning.

Kontakta de lokala myndigheterna eller återförsäljaren där produkten har köpts för mer

information.

Informazioni per gli utenti negli Stati dell’Unione Europea

Questo simbolo sul prodotto o sull’imballaggio indica che l’apparato elettrico o elettronico

alla fine del suo periodo di vita dovrebbe essere smaltito separatamente dai rifiuti

domestici.

Nell’UE esistono altri sistemi di raccolta differenziata.

Per ulteriori informazioni, contattare le autorità locali o il rivenditore presso il quale è stato

acquistato il prodotto.

Información para usuarios aplicable en los países de la Unión Europea

Este símbolo en el producto o en su embalaje significa que debería deshacerse de su

equipo eléctrico o electrónico, al final de su vida útil, de forma separada del resto de los

residuos domésticos. Para estos productos hay sistemas de recogida selectiva para

reciclarlos en la Unión Europea.

Para más información, rogamos contacte con la autoridad local o el distribuidor donde

adquirió el producto.

4

Important for United Kingdom

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value

of which is indicated on the pin face of the plug.

Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the

sa

me rating. If the fuse cover is detachable never use the plug with the cover omitted. If a

replacement fuse cove r is required, ensure it is of the same colour as that visible on the pin face of

the plug. Fuse covers

are available from your dealer.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power

points in your home or the cable is too short to reach a power point, then obtain an appropriate

s

afety approved extension lead or consult your dealer.

If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately,

having first removed the fuse, to avoid a po

ssible shock hazard by inadvertent connection to the

mains supply.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue= Neutral, Brown= Live

As these colours may not correspon

d with the coloured markings identifying the terminals in your

plug, proceed as follows:

The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured

BLUE or BLACK.

The wire coloured BROWN must be connected

to the terminal marked with the letter L or coloured

BROWN or RED. On no account connect either of these wires to the terminal marked E or by the

earth symbol or coloured green or green and yellow.

5

IMPORTANT SAFETY INSTRUCTIONS

In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a

major factor in the design of every instrument. But, safety is your responsibility too.

This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/

recorder and accessory equipment.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Protect the mains lead from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

10 Only use attachments/accessories specified by the

manufacturer.

11 Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination to

avoid injury from tip-over.

12 Unplug this apparatus during lightning storms or

when unused for long periods of time.

13 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as mains lead or plug is

damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate

normally, or has been dropped.

14 The apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

15 The equipment (AC Adapter/Charger) shall be

used near the socket-outlet and shall be easily

accessible.

6

Cautions When Using

Handle the liquid crystal display (LCD) with care:

• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with

a sharp object.

• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear

soon, turn the DVD video camera/r

ecorder off, wait for a few moments, and then turn it on again.

• Do not place the DVD video camera/recorder with the open LCD screen down.

• Close the LCD monitor when not using the DVD video camera/recorder.

Liquid crystal display (LCD) and viewfinder:

• The LCD screen and viewfinder are the products of highly precise technology. Among the total

number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels

for viewfinder), 0.01% or less pixels may be missing (bla

ck dots) or may remain lit as coloured dots

(red, blue, green). This shows the limitations of the current technology, and does not indicate a

fault that will interfere with recording.

• The LCD screen and viewfinder will be slightly

dimmer than usual when the DVD video camera/

recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal

brightness will be restored when the te mpe rature inside the

DVD video camera/recorder rises.

Hold the DVD video camera/recorder correctly:

• Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The

viewfinder or LCD monitor could detach and the DVD video came ra/recorder may fall.

Do not subject the DVD video camera/recorder to impact:

• This DVD video camera/recorder is a precision machine. Take great care that you do not strike it

against a hard object or let it fall.

• When using a tripod, firmly secure the DVD video camera/recorder on it. Do no

t use the DVD

video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.

No sand or dust!

• Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause

malfunctions or defects.

No water or oil!

• Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric

shock, malfunctions or defects.

Heat on surface of product:

• The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly

warm, but this does not indicate a fault.

Screen on connected TV:

• Never leave the disc navigation screen, still image or camera image displayed on your TV to which

the DVD video camera/recorder is connected: Doing so could result in displayed image retention

or phosphor

degradation of TV screen.

Be careful of ambient temperature:

• Using the DVD video camera/recorder in a place where the temperature is over 40ºC or under 0ºC

will result in abnormal recording/playback.

• Take care that the temperature of this DVD video camera/recor

der, when connected to PC does

not rise excessively (reference for usage: approx. 30 minutes at about 30ºC).

• Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle wher

e the

temperature is very high for a long time: This could cause malfunctions.

7

Do not point directly at the sun:

• If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction

or a fire could occur.

• Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This

could c

ause malfunctions.

Do not use the DVD video camera/recorder near TV or radio:

• This could cause noise to appear on the TV screen or in radio broadcasts.

Do not use the DVD video camera/recorder near strong radio waves or magnetism:

• If the DVD video camera/recorder is used near strong radio waves or magnetism, such as near a

radio wave tower o r electric appliances, noise could enter video and aud io that are being r

ecorded.

During playback of normally recorded video and audio, noise may also be present in picture and

sound.

At worst the DVD video camera/recorder could malfunction.

Do not expose the DVD video camera/recorder to soot or steam:

• Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.

Do not use the DVD video camera/recorder near corrosive gas:

• If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated

by petrol or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot spring

area, th

e external or internal terminals could corrode, which would disable normal operation, or

the battery connecting terminals could corrode, so powe r will no t turn on.

Do not use the DVD video camera/recorder near ultrasonic humidifier:

• With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the

air, and white pa rticles could adhere to the optical head of the DVD video camera/recorder, which

coul

d cause it to operate abnormally.

Do not expose the DVD video camera/recorder to insecticide:

• Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block,

and in such a case the DVD video camera /recorder might not operate normally. Turn the DVD

video camera/recor

der off and cover it with vinyl sheet, etc. before using insecticide.

Do not use a generally available 8 cm CD lens cleaner:

• Cleaning the lens is not necessary when using this DVD video camera/recorder in the usual way.

• Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.

• If you have to clean the lens, use a Hitachi Ma

xell cleaner that is exclusively for 8 cm DVD discs.

Be careful of moisture condensation:

• When you move the DVD video camera/recorder between places where the difference in

temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or

vehicle

– condensation (vapour in air warmed or cooled to water droplets) could occur on the lens

and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of

disc

or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft,

dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may

remain inside: Turn the DVD vi

deo camera/recorder off and leave it in a dry place for at least 1 – 2

hours before using it again.

Do not use the DVD video camera/recorder for a long uninterrupted period of time:

• This DVD video camera/recorder cannot be used for a long time continuously as a surveillance

camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video

camera

/recorder could exceed the limit and the recording/playback operation may slow down or

other faults could occur. If this happens, turn it off and wait for a while before using it again.

8

Do not turn the DVD video camera/recorder off while the ACCESS indicator or

CARD ACCESS indicator is lit or blinking:

• The ACCESS or CARD ACCESS indicator is lit or blinking

to show that data is being written to disc or card, or being

read from it. At this time, do not do any of the following,

so as not to damage the data:

− Remove batter

y

− Disconnect AC adapter/charger

− Plug or unplug PC connection cable

− Remove disc or card

− Subject DVD video camera/recorder to severe

vibrations or impact

− Violently open or close the LCD monito

r

The ACCESS indicator will light for a while after recording

is finished . While it is lit, do not subject the DVD video

camera/recorder to any vibration or impact, and do not

disconnect the battery or AC adapter/charger.

If

you turn the DVD video camera/recorder off while the

ACCESS or CARD ACCESS indicator is lit or blinking, turn

it on again with the disc or card loaded in it: Repair of the

disc or card will be executed automatically (see page 108).

Do not wipe the DVD video camera/recorder case with benzene or thinner:

• The coating of case could peel off or the case surface could deteriorate.

• When using a chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

• For optional accessories, observe the cautions and follow instruction manuals attached.

The battery provided has not been charged at time of purchase:

• Charge it before using the DVD video camera/recorder (see page 26).

• The battery will discharge as time passes. (The battery is produced so that it discharges on its own

in order to protect its characteristics.)

Disc cannot be inserted or removed unless a charged battery or AC adapter/

charger is connected to the DVD video camera/recorder.

Be sure to set the power switch to “OFF” when turning the DVD video camera/

recorder off:

• Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being

powered could cause a fault.

CARD ACCESS indicator

ACCESS

indicator

9

Cautions When Storing

Do not leave the DVD video camera/recorder in a place where the temperature is

very high for a long period of time:

• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave

the DVD video camera/recorder in such a place, it could malfunction or the case could be

damag

ed. Also, do not expose the DVD video camera/recorder to direct sunlight or place it nea r a

heater.

Do not store the DVD video camera/recorder in a place where the humidity is high

or in a dusty place:

• Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high,

the lens could be mouldy, and the DVD video camera/recorder could become inoperable. It is

recommended

that you put the DVD video camera/recorder with desiccant in a box when storing

it in a closet, etc.

Do not store the DVD video camera/recorder in a place subject to strong

magnetism or intense vibrations:

• This could cause malfunctions.

Detach the battery from the DVD video camera/recorder and store it in a cool place:

• Leaving the battery attached or storing it at high temperature could shorten its life.

Suggestions and Restrictions

Make a trial recording:

• Always make a trial recording before doing actual recording to make sure that recording is normal.

The data that have not been stored normally because of a defect in the DVD video c

amera/

recorder cannot be restored.

It is recommended that you use DVD-RAM disc from which recorded contents can be deleted for

trial recording.

Do not use the DVD video camera/recorder for professional applications:

• This DVD video camera/recorder is designed and produced for home-use recording and playback.

The recorded contents cannot be compensated for:

• Hitachi cannot compensate for any damages caused when recording is not made normally or

recorded contents cannot be played back because of a defect in the DVD video camera/recor

der,

disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.

• If you or a third party make a mistake when handling this DVD video camera/recorder, disc, card,

etc., the

recorded conte nts may be lost. We cannot be responsible for compensation for damage due

to loss of recorded contents.

Copyright:

• Data recorded on the disc or card in this DVD video camera/recorder using other digital/analog

media or devices are protected by the copyright act and cannot be used without permission

of the

owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some

demonstrations, performances and exhibitions, even for personal enjoyment.

10

CLEANING

Be sure to set the power switch to “OFF” before cleaning this DVD video camera/recorder.

●Cleaning LCD screen and camera

lens

Use dry, soft cloth to wipe dirt off. When

cleaning the LCD screen, be careful not to use

force, scratch it, or subject it to impact: Doing

such could cause a defect in the screen, result in

display unevenness, or damage the LCD

monit

or.

●If dust adheres to the viewfinder

lens, remove it using a cotton

swab, etc.

Do not rub the lens with force: Doing so could

scratch the lens.

●Do not use benzene or thinner to

clean DVD video camera/recorder

case

The coating of case could peel off or the case

could deteriorate. Wipe off dirt on the case with

a moist cloth which has been completely wrung

out. When using chemical cleaning cloth, follow

instructions for use.

HANDLING DISCS

●Using discs

Discs are very delicate recording media.

Carefully read the following cautions and

observe them:

• Always use a brand new disc when recording

important material.

• Be sure not to t

ouch the recording surface of

disc, or dirty or scratch it.

• If there is dust, scratch, dirt on disc or if it is

warped, the following phenomena may occur:

− Block noise in playback

image

− Momentary stop of

playback image

− Sound interrupted during

pl

ayback, or abnormal

sound

− Blue thumbnail

display* (Fig. 1)

− Disc cannot correctly

be recognised

− Disc cannot be

initialised

− Delay between video

and audio

Even if disc is normal, the above phenome

na

may occasionally occur. While the ACCESS

indicator is lit, do not subject disc to vibrations

or impact, and avoid using DVD video

camera/recorder at extremely high or low

temperatures, or in environm

ent where

condensation is likely to occur.

• When recording images,

the DVD video camera/

recorder may avoid the

portions of disc where

recording is not possible,

due to dust, scratch

es,

etc. [It will pause 9 at

such a portion and

automatically restart

recording (:).]

This will cause recording to be interrupted for

several seconds to several minutes, and

multiple thumbnails will be cr

eated by one

recording session as shown above. In this case,

the recordable time on disc will decrease.

• Be careful when removing the disc since the

metal of removal slot of DVD video cam

era/

recorder, and disc itself, may be ho t.

●Storing discs

• When storing disc, replace it in the plastic case

in which it was purchased.

• Be careful that no condensation occurs on disc.

• Do not place disc in following places:

− Direct sunlight for a long time

− Where humidity is high or in dusty place

− Where there is heat from a heater, etc.

Block noise

001/ 006All Progra

m

s

PLAY

Fig. 1

*

001 / 002All Progra

m

s

PLAY

(Recording one scene

may produce multiple

thumbnails.)

11

DISC CLEANING

Use the disc cleaning cloth provided to lightly

wipe off any dirt adhering to the disc as shown

in the figure. Do not wipe the disc with force:

Doing so could cause scratches.

Never use solvent (thinner, water, antistat

or

detergent) for cleaning.

Lightly wash the dirty cleaning cloth with

detergent: The dirt removal capacity of the cloth

will improve (rinse the cloth well with water so

that no detergent remains).

Read This First

To guide you, we have included following four chapters.

• The section on “Setups” explains how to set

up the DVD video camera/recorder, battery,

and set the date/time.

• The section on “Basic Techniques” explains the

basic operation of this DVD video camer

a/

recorder – recording of movies, still images

and playback of recorded images.

• The section on “Disc Navigation” explains

editing with Disc Navigation: Refer to this

section when finalising DVD-RW/DVD-R/

+RW disc and initialising DVD-RAM/DVD-

RW/+RW.

• “Subsid

iary Information” includes an

introduction to products sold separately, and

troubleshooting.

We want this manual to be as helpful as

possible, so it includes two easy ways to find the

information you need:

• A quick index for the information you use

most often.

• A detailed table of contents directing you t

o

specific information quickly (see pages 13 –

15).

Get to know your DVD video camera/recorder by

using this manual, and get to know Hitachi. We

appreciate your business.

Quick Index

Available Discs ................................................ 23

Recording Movie ............................................. 40

Playing Back.................................................... 66

Functions Available with Disc Navigation ........ 73

Connecting to a TV........................................ 103

Use the disc cleaning

cloth to clean from inner

to outer edges in axial

direction.

With this DVD video camera/recorder you can view the picture being recorded or the playback

picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor

switches the picture to appear on the LCD monitor or in the vi

ewfinder.

It is possible to switch the language in the on-screen display of this DVD video camera/recorder

(see page 33).

12

About This Manual

●Displays in this manual

Understand that the display s are different from those you will actually see in the viewfinder or on

the LCD screen.

●Notation of cancel button

Press the STOP/EXIT button to stop your operation midway, or return the menu screen to the

preceding one. The expression “press the  button” will be used in this text.

●, , , ,  and  marks beside headings

Some functions of this DVD video camera/recorder are unavailable with disc or card used. Refer to

the marks at right above each function to identify whether the disc or card is compatible with the

function. Ref

er to these marks and identify the functions and operation to match the disc or card you

use.

Manufactured under licence from Dolby Laboratories.

“Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

Other company names and product names listed are trademarks or brand names belonging to each

individual compa ny.

SD logo is a trademark.

13

Table of Contents

Important Information.........................................2

For Your Safety..................................................2

Precautions ........................................................2

IMPORTANT SAFETY INSTRUCTIONS...........5

Cautions When Using ........................................6

Cautions When Storing ......................................9

Suggestions and Restrictions.............................9

CLEANING .......................................................... 10

HANDLING DISCS ..............................................10

DISC CLEANING................................................. 11

Read This First.................................................11

About This Manual ...........................................12

Table of Contents.............................................13

Checking Provided Accessories.......................16

Names of Parts ................................................17

Setups

Demonstration Function...................................20

Setting Up the DVD Video

Camera/Recorder..........................................20

HOLDING DVD VIDEO

CAMERA/RECORDER..................................... 20

ATTACHING SHOULDER STRAP ...................... 20

ATTACHING LENS CAP ..................................... 21

Discs and Cards...............................................22

AVAILABLE DISCS ............................................. 23

INFORMATION ON DVD-R DISC ....................... 23

NOTES ON FINALISATION ................................ 23

EXAMPLES OF DISCS THAT CANNOT BE USED

ON THIS DVD VIDEO

CAMERA/RECORDER..................................... 24

AVAILABLE CARDS............................................ 24

COMMON CAUTIONS FOR DISC AND CARD .......24

Preparations for Power Supply ........................25

USING DVD VIDEO CAMERA/RECORDER WITH

AC ADAPTER/CHARGER................................ 25

Setting Up the Battery......................................26

CHARGING BATTERY........................................ 26

ATTACHING BATTERY TO DVD VIDEO

CAMERA/RECORDER..................................... 27

REMOVING BATTERY........................................ 27

BATTERY REMAINING LEVEL INDICATOR...... 29

EFFICIENT USE OF BATTERY .......................... 29

Turning DVD Video Camera/Recorder On and

Off..................................................................30

VIEWING IMAGE ON LCD

MONITOR SCREEN.........................................31

VIEWING SUBJECT THROUGH

VIEWFINDER ...................................................31

Setting Date and Time .....................................32

CHANGING DISPLAY FORMAT OF DATE AND

TIME ................................................................. 32

Initial Settings.................................................. 33

SWITCHING OPERATING SOUND ON OR OFF

(BEEP)..............................................................33

TURNING DVD VIDEO CAMERA/RECORDER

OFF AUTOMATICALLY (POWER SAVE) ........33

CHANGING DISPLAY LANGUAGE

(LANGUAGE)....................................................33

RESETTING MENU SETTINGS TO DEFAULTS

(RESET)............................................................34

TURNING RECORD LED ON OR OFF (RECORD

LED)..................................................................34

CHANGING SETTING OF

DEMONSTRATION ..........................................34

LCD/EVF Setup............................................... 35

ADJUSTING BRIGHTNESS OF LCD SCREEN

(LCD BRIGHTNESS) AND VIEWFINDER (EVF

BRIGHTNESS) .................................................35

ADJUSTING COLOUR DENSITY (COLOUR

LEVEL)..............................................................36

ALWAYS DISPLAYING IMAGE IN

VIEWFINDER ...................................................36

Inserting and Removing Disc .......................... 37

Inserting and Removing Card.......................... 39

Basic Techniques

Recording Movie ............................................. 40

Recording Stills ............................................... 41

Swift Restart of Recording

(SLEEP/RESTART button)........................... 42

On-Screen Information.................................... 43

INFORMATION DISPLAY DURING

RECORDING ....................................................43

Checking Flow of Menu................................... 48

Zooming .......................................................... 50

MACRO RECORDING ........................................50

RECORDING SUBJECTS FOR STRONGER

WIDE-ANGLE OR TELEPHOTO EFFECT .......51

Manually Focusing Subject ............................. 52

FOCUSING DURING RECORDING....................52

Adjusting Brightness of Image to be recorded

(Exposure) .................................................... 54

Compensating for Backlight ............................ 54

Setting Up Camera Functions ......................... 55

SELECTING SHOOTING MODE TO MATCH THE

SUBJECT

(SWITCHING PROGRAMME AE MODE) ........55

RECORDING DARK SUBJECTS USING LCD

MONITOR LIGHT .............................................56

ADJUSTING COLOUR (WHITE BALANCE) .......56

USING THE ELECTRONIC IMAGE STABILISER

(EIS)..................................................................58

RECORDING SUBJECT USING LARGE

MAGNIFICATION (DIGITAL ZOOM) ................58

REDUCING WIND NOISE DURING RECORDING

(MIC.FILTER)....................................................58

14

Setting Up Record Functions........................... 59

SWITCHING MOVIE QUALITY

(VIDEO MODE) ................................................ 59

SETTING TO WIDE TV SCREEN MODE

(16:9 MODE)..................................................... 60

SWITCHING QUALITY OF STILL IMAGE

(QUALITY)........................................................ 62

SELF-TIMER ....................................................... 62

SETTING ON-SCREEN DISPLAY OUTPUT ON

OR OFF (OSD OUTPUT) ................................. 63

Disc Navigation

Using Disc Navigation...................................... 64

STARTING OR TERMINATING DISC

NAVIGATION.................................................... 64

PLAYING BACK FROM DISC NAVIGATION

SCREEN........................................................... 66

PLAYING BACK LATEST RECORDED

SCENE ............................................................. 67

DELETING LAST RECORDED SCENE.............. 67

CAPTURING PHOTO.......................................... 68

PLAYBACK FROM START OF DISC

OR CARD ......................................................... 68

SEARCH PLAYBACK OF MOVIE ....................... 68

FRAME ADVANCE/FRAME BACK/SLOW

PLAYBACK OF MOVIE .................................... 68

SKIP PLAYBACK OF MOVIE.............................. 69

PLAYING BACK STILLS ..................................... 69

JUMPING TO SPECIFIED POINT (GO TO) ....... 70

INFORMATION DISPLAY DURING

PLAYBACK....................................................... 71

SELECTING MULTIPLE SCENES...................... 72

SELECTING CONSECUTIVE SCENES

TOGETHER...................................................... 72

FUNCTIONS AVAILABLE WITH DISC

NAVIGATION.................................................... 73

UNDERSTANDING FLOW OF DISC NAVIGATION

MENU ............................................................... 74

Scene............................................................... 76

DELETING SCENES (EDIT – DELETE) ............. 76

DIVIDING MOVIES (EDIT – DIVIDE) .................. 77

COMBINING MULTIPLE SCENES

(EDIT – COMBINE) .......................................... 78

ARRANGING ORDER OF SCENES

(EDIT – MOVE)................................................. 78

DIRECTING SCENES EFFECTIVELY

(EFFECT – FADE)............................................ 79

PLAYING BACK BY SKIPPING SCENES

(EFFECT – SKIP) ............................................. 80

CHANGING IMAGES FOR THUMBNAILS

(EFFECT – THUMBNAIL)................................. 81

COPYING STILLS ON DVD-RAM DISC TO CARD

(COPY) ............................................................. 82

LOCKING SCENES ON CARD (LOCK).............. 83

SELECTING SCENES USING MENU SCREEN

(SELECT) ......................................................... 84

DISPLAYING INFORMATION USING MENU

SCREEN (DETAIL)........................................... 85

Programme......................................................86

WHAT IS “PROGRAMME”? ................................ 86

SWITCHING TO THUMBNAIL DISPLAY OF

SPECIFIC DATE (SELECT) .............................86

PLAYING BACK PROGRAMME (PLAY)............. 87

CHANGING TITLE OF PROGRAMME

(TITLE)..............................................................87

Play List ...........................................................89

WHAT IS “PLAY LIST”?....................................... 89

CREATING NEW PLAY LIST (CREATE) ............89

SWITCHING TO DISPLAY OF EACH PLAY LIST

(SELECT) .........................................................90

PLAYING BACK A PLAY LIST (PLAY)................ 90

ADDING SCENES TO PLAY LIST

(EDITING PLAY LIST) ......................................91

DELETING SCENES FROM PLAY LIST

(EDITING PLAY LIST) ......................................92

ADDING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ......................92

DELETING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ......................93

SELECTING SCENES USING SUBMENU FOR

EDITING (EDITING PLAY LIST) ......................93

ARRANGING ORDER OF SCENES (MOVE) .....94

CHANGING TITLE OF PLAY LIST (TITLE).........95

DELETING PLAY LIST (DELETE).......................95

Go To...............................................................96

TOP (END) .......................................................... 96

Disc or Card Management...............................96

INITIALISING DISC OR CARD (FORMAT DISC.

FORMAT CARD) ..............................................96

PROTECTING DISC FROM WRITING (PROTECT

DISC) ................................................................97

VERIFYING REMAINING FREE SPACE ON DISC

OR CARD (CAPACITY)....................................97

UPDATING CONTROL INFORMATION OF DVD-

RAM/DVD-RW (VR-MODE) DISC (UPDATE

CONTROL INFO.) ............................................98

FINALISING DVD-RW/DVD-R/+RW DISC

(FINALIZE DISC) ..............................................99

ADDITIONALLY RECORDING ON FINALISED

DVD-RW (VF-MODE)/+RW

(UNFINALIZE DISC).......................................100

Others............................................................101

DISPLAYING MOVIES OR STILLS

INDEPENDENTLY (CATEGORY) ..................101

PLAYING BACK SCENES REPEATEDLY

(REPEAT PLAY).............................................101

PLAYING BACK WIDE-MODE IMAGES ON 4:3

DISPLAY TV (TV TYPE).................................102

SLIDE SHOW (CONTINUOUS PLAYBACK OF

STILLS)...........................................................102

Viewing on TV Screen ...................................103

CONNECTING TO A TV....................................103

VIEWING ON TV SCREEN ...............................104

Playback on DVD Recorder/Player................105

PLAYING BACK DVD-RAM/DVD-RW (VR-MODE)

DISC ...............................................................105

PLAYING BACK DVD-RW (VF-MODE)/DVD-R/

+RW DISC ...................................................... 105

Recording (Dubbing) Images.........................106

RECORDING (DUBBING) IMAGES ON OTHER

VIDEO DEVICES ............................................ 106

15

Subsidiary Information

Introduction to Optional Accessories..............107

CAMERA ACCESSORIES ................................ 107

POWER SUPPLY.............................................. 107

Trouble Messages..........................................108

Troubleshooting .............................................114

System Reset.................................................120

Major Specifications .......................................121

SIZE AND QUALITY OF PHOTOS....................123

RECORDABLE STILLS (PHOTOS)

ON CARD ....................................................... 123

Index ..............................................................124

TOC

16

Checking Provided Accessories

Make sure that you have all the following accessories in package:

Battery (model DZ-BP07PW):

Portable power supply for this DVD video

camera/recorder. Charge it before use.

AC adapter/charger

(model DZ-ACS3 (E)):

Used to power the DVD video camera/

recorder from AC outlet, or charge battery.

DC power cord:

When powering the DVD video camera/

recorder from household AC outlet, use

this cord to connect the DVD video

camera/recorder and AC adapter/charger.

Mains lead:

Connect between household AC outlet and

AC adapter/charger.

AV/S output cable:

Used when viewing the picture played back

on the DVD video camera/recorder on TV

screen, or output video to another video

device.

Shoulder strap:

Attach to the DVD video camera/recorder

to hang it from shoulder.

Lens cap and lens cap string:

Attach the lens cap when not recording, to

protect the lens.

Single-sided 8 cm DVD-R disc:

To record videos (movies) on this DVD

video camera/recorder.

Disc cleaning cloth:

Always use this to clean discs.

17

Names of Parts

1 Lens cap string attachment hole (p. 21)

2 Stereo microphone

Take care that the microphone is not blocked

by a hand, etc., during recording.

3Recording indicator (p. 34)

The red indicator will light during recording.

4Optical 25× zoom lens (p. 50)

5 Lens hood (p. 51)

Always remove this lens hood when using

the optio

nal tele-conve rsion or wide-

conversion lens.

6 Zoom lever (p. 50)

Push the lever to the T side for telephoto, or

to the W side for wide-angle.

7 AV output jack (p. 103, 106)

8 Wide-screen colour liquid crystal display

(inside) (p. 31)

8

7

45 6

123

18

9 Viewfinder (p. 31)

10 Dioptre control (p. 31)

To adjust the focus of image appearing in the

viewfinder. (Pull out the viewfinder.)

11 SLEEP/RESTART button (p. 42)

To switch the sleep/restart status between

ON and OFF.

12 ACCESS indicator (p. 8, 40, 41)

Will blink or light when the disc in DVD

video camera/recorder is accessed (write or

r

ead is executed).

13 PHOTO button (p. 41)

14 DISC EJECT button (p. 37)

Press down and release this button to open

the cover of disc insertion block.

15 Disc insertion block (p. 37)

16 BATTERY EJECT button (p. 27)

Press this button when removing the battery.

17 Battery attachment platform (p. 27)

18 Record button (REC) (p. 40)

19 LOCK switch (p. 40)

It is recommended that you set th

e LOCK

switch to  (to the upper position) to prevent

the power switch in the “!” position from

accidentally moving to “ ”.

20 Power switch (p. 30)

21 Hand strap (p. 20)

10 11 12

16

13

17 18 20 21

15

19

149

19

22 FINALIZE button (p. 99)

Press this button to finalise the recorded

DVD-RW/DVD-R/+RW.

23 FOCUS button (p. 52)

To switch between manual focus and auto-

focus.

24 MENU button (p. 32, 48, 77)

Press this button to display the menu for

setting camera functions and Disc

Navigation.

25 SELECT button (p. 72)

26 DISC NAVIGATION button (p. 64)

27 STOP/EXIT button (p. 12, 48, 67)

To end play

back or cancel setting of menu.

28 EXPOSURE button (p. 54)

Press this button to adjust the exposure.

29 Speaker (p. 67)

30 RESET button (p. 120)

To reset all settings to defaults (status when

the DVD video camera/recorder was

shipped from the factory).

31 DISPLAY (Screen display) button (p. 43, 71)

Press this button to display the details of

image being played back or camera setting

status, or switch the display off.

32 CARD ACCESS indicator (p. 8, 41)

33 Volume control buttons (VOL)/

%$ buttons (p. 52, 54, 67)

To adjust the volume of sound from speaker,

etc.

34 Card insertion block (p. 39)

35 BLC (backlight compensation) button

(p. 54)

Press this button wh

en subject is being

lighted from rear.

36 2 / 1 / 0 / / /  buttons

(p. 32, 48, 67)

Use these buttons to select a scene or menu

item, and then press the centre () to play

back the scene, or designate an option from

th

e menu.

37 Tripod threaded hole

Used to attach the DVD video camera/

recorder to a tripod.

23 24 25 26 27 28

29 3531 32 33 3430

22

36

37

20

Setups

This section explains preparations for recording – setting up the DVD video camera/recorder

and battery.

Demonstration Function

This DVD video camera/recorder is equipped with a demonstration function.

The default at purchase time is “Auto”, which will automatically start the demonstration approx. three

minutes after the DVD video camera/recorder is turned on.

Refer to “CHANGING SETTING OF DEMONSTRATION” on page 34 if you

wish to view the demonstration immediately or change the setting to “Off”.

Setting Up the DVD Video Camera/Recorder

HOLDING DVD VIDEO CAMERA/RECORDER

Insert your right hand from the bottom of DVD video camera/recorder up to the base of your thumb.

Put your hand in a position where you can easily operate the REC button and the Zoom lever.

Adjust the length of ha nd strap so that the DVD video camera/recorder is stable when you press the

REC button with your thumb.

ATTACHING SHOULDER STRAP

Pass the shoulder strap through

the shoulder strap attachments.

Be sure to pass through the 2 slots.

La pagina si sta caricando...

Hitachi DZ-MV4000E Manuale utente

Hitachi DZ-MV4000E Manuale utente

in altre lingue

Documenti correlati

Altri documenti