Samsung AW12FADBA Manuale utente

Tipo
Manuale utente
ENGLISH
OWNER’S INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’UTILISATION
MANUAL DE INSTRUÇÕES
ISTRUZIONI PER L'USO
Window-type Room Air Conditioner ( Cool )
Acondicionador de aire doméstico sistema de tipo ventana
( Refrigeración )
Climatiseur de type Fenêtre ( Refroidissement )
O ar Condicionado de Window-Type ( Refrigeração )
Condizionatore d’aria per ambienti da finestra ( Raffreddamento )
E
S F P I
DB98-04665A(6)
ESPAÑOL
FRANÇAIS
PORTUGUÊS
ITALIANO
AW06FANAA
A
W07FANAA/AB/BA/BB/BC/DA/DB/EA/EB/EC
AW08FANAA/AB/AC
AW09FANAA/BA/CA/DA/EA/EB
AW10FADAA/BA/CA
AW12FADAA/BA/CA/DA/EA/EB/EC
AWT12FADBA/BB/BC/EA/EB
AW14FAMAA/AB/BA/CA/DA/EA
AW18FAMBA/BB/BC/BD/DA/EA/EB
AW18FAMCA/CB/CC
AWT18FAMBA/BB/BC/DA/EA/EB
AWT19FAMBA/BB/EA/EB
AWT20FAMBA/BB
AW22FAMBA/BB/EA/EB
AW24FAMBA/BB/BC/BD/EA/EB
AW24FAMCA/CB/CC/CD
AWT24FAMBA/BB/BC/EA/EB/EC
AW06A(G)ANAA
A
W07A(G)ANAA/AB/BA/BB/BC/DA/DB/EA/EB/EC
AW08A(G)ANAA/AB/AC
AW09A(G)ANAA/BA/CA/DA/EA/EB
AW10A(G)ADAA/BA/CA
AW12A(G)ADAA/BA/CA/DA/EA/EB/EC
AWT12AADBA/BB/BC/EA/EB
AW14A(G)AMAA/AB/BA/CA/DA/EA
AW18A(G)AMBA/BB/BC/BD/DA/EA/EB
AW18A(G)AMCA/CB/CC
AWT18A(G)AMBA/BB/BC/DA/EA/EB
AWT19A(G)AMBA/BB/EA/EB
AWT20A(G)AMBA/BB
AW22A(G)AMBA/BB/EA/EB
AW24A(G)AMBA/BB/BC/BD/EA/EB
AW24A(G)AMCA/CB/CC/CD
AWT24A(G)AMBA/BB/BC/EA/EB/EC
The following safety precautions must be taken when installing
and using your air conditioner.
Safety Precautions
1 The air conditioner must be plugged into its own specific power source, which must be
installed in compliance with national wiring, earthing and safety regulations.
Depending on national regulations and your specific installation, you may need to install:
A circuit breaker
For further information on electrical requirements, contact a professional electrician.
This device must be installed according to the national electrical rules.
2 Make sure that the unit is correctly ventilated at all times;
do NOT place clothing or other materials over it.
4 Do NOT insert anything between the air outlet blades, as it may damage the inner fan
and you may be hurt. Keep children away from the unit.
5 ALWAYS ensure that the power cable is in good condition.
If the power cord is damaged in any way, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
6 Do NOT attempt to repair the unit yourself. If it is damaged in any way, contact:
An authorized service center
The dealer from whom you purchased the air conditioner.
7 Do NOT place any blocking objects in front of the unit.
3 NEVER spill liquids of any kind into the unit.
Should this happen, unplug the unit and contact your installation specialist.
8 If the remote control will not be used for a long time, remove the batteries.
9 Before throwing out the device, it is necessary to pull back the battery cells
and get rid of them safely.
E-2
The manufacturer does not assume responsibility for accidents or injury
caused by an incorrectly installed air conditioner. If you are unsure about
installation, contact an installation specialist.
CC
CC
AA
AA
UU
UU
TT
TT
II
II
OO
OO
NN
NN
Contents
PREPARING YOUR
AIR CONDITIONER
Safety Precautions ......................................................................................... 2
Air Conditioning Unit - Main Parts, Buttons and Display ............................... 4
Remote Control Buttons ................................................................................. 5
Getting Started ............................................................................................... 6
Inserting the Remote Control Batteries .......................................................... 7
OPERATING YOUR AIR CONDITIONER
Cooling Your Room ........................................................................................ 8
Airing Your Room ........................................................................................... 9
Adjusting the Air Flow Direction Horizontally .................................................. 10
Adjusting the Air Flow Direction Vertically ...................................................... 10
P
ROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer ...................................................................................... 11
Setting the Off Timer ...................................................................................... 12
Setting the Sleep Timer .................................................................................. 13
Selecting Energy Saving mode ...................................................................... 14
RECOMMENDATIONS FOR USE
Temperature and Humidity Ranges ................................................................ 14
Cleaning Your Air Conditioner ........................................................................ 15
Solving Common Problems ............................................................................ 17
Technical Specifications ................................................................................. 18
INSTALLATION ......................................................................................................... 19
E-3
ENGLISH
CC
CC
AA
AA
UU
UU
TT
TT
II
II
OO
OO
NN
NN
The maximum permissible system impedance at the power junction box is 0.24 ohms.
Usually, the maximum permissible mains impedance will not be exceeded when the
branch to the power outlet is fed from a junction box with a rated current of 32A.
AW18✴✴
" The high inrush current of the starting compressor motor can have adverse effects to
the operation of other equipment under unfavorable mains conditions. This equipment
does not comply with the relevant technical standards for the limitation of voltage
fluctuations and flicker."
Before connecting this equipment to the power supply system, please report to your
supply authority and obtain the consent.
Do not connect other electric appliances to the same supply lines.
Air Conditioning Unit - Main Parts, Buttons and Display
Air inlet (inside)
Air filter
(The air filter is
located inside)
Inner air flow blades
(right/left orientation)
Air outlet
Outer air flow blades
(up/down orientation)
Air inlet (Outside)
Ventilation lever
The type of the power plug
may differ according to the
type of local power supply.
The power plug may be not supplied
depending on the model.
Power plug
Power cable
Power cable connection
should be committed to
an installation engineer.
Blue Brown
Yellow/Green
Main Power
Earth
Fan speed indicators
(LOW, MED, HIGH)
Temperature/Timer
settings
Temperature adjustment
buttons
Operating mode indicators
(COOL, FAN)
Remote control sensor
Air flow blade swing button
Fan speed adjustment
button
Air flow blade swing indicator
Energy Saver indicator
Sleep timer setting button
Timer indicator
Energy Saver button
ON/OFF button
Operating mode selection
button
(COOL, FAN)
Timer setting button
The design and shape are subject to
change according to the model.
E-4
Remote Control - Buttons
Temperature adjustment
buttons
Fan speed
adjustment buttons
ON/OFF button
E-5
ENGLISH
Timer setting button
Sleep timer setting button
Operating mode
selection buttons
Energy Saver button
Air flow blade swing button
Getting Started
You have just purchased a window-type room air conditioner and it has been installed by your
installation specialist.
Your Owner’s Instructions contain valuable information on using your air conditioner.
Please take the time to read them as they will help you take full advantage of the unit’s functions.
This Owner’s Instructions is just for using your air conditioner correctly.
Thus, the illustrations shown in this manual may not exactly match your air conditioners.
The booklet is organized as follows.
The following figures are shown on pages 4 and 5:
- Air conditioning unit (main parts, buttons and display)
- Remote control (buttons)
They will help you find the buttons and understand the symbols displayed.
In the main part of the document, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use four different symbols:
Moreover, applicable, wherever the illustrations show the positions of the buttons on both the
remote control and the unit itself.
For the... The illustrations have a...
Remote control Gray background.
Example:
Unit itself White background.
Example:
PRESS PUSH IMPORTANT NOTE
E-6
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when:
You purchase the air conditioner
The remote control does not work correctly
Use two AAA, LR03 1.5 V batteries. Do not use old
batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months,
even if they have not actually been used.
1 Push the battery cover on the rear of the remote control with your thumb in
the direction of the arrow and remove it.
2
Insert the two batteries, taking care to respect the polarities:
+ on the battery with + on the remote control
– on the battery with – on the remote control
3
Close the cover by sliding it back until it clicks into place.
Result
:
You can control all the functions on your air conditioning unit
directly from your seat, using the remote control.
E-7
ENGLISH
You must select the Cool mode if you wish to lower the temperature in your
room. You can also set the fan speed.
1 If necessary, press the (On/Off) button.
Result
: The operating mode indicator (COOL or FAN) on
the unit comes on.
The air conditioner starts up in the mode selected
when the unit was last used.
The unit beeps twice.
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
Plugged in
Stopped
It will start up automatically after about three minutes.
2
If the COOL indicator is not lit up on the unit:
Press the button on the remote control
or
Press the MODE button on the unit one or more times until the COOL
indicator lights up
Result
: The unit beeps each time you press MODE.
The air conditioner starts up in Cool mode.
You can change modes at any time.
3
To adjust the temperature, press the or button on the remote
control one or more times until the required temperature is displayed.
To adjust the temperature, press the or button on the unit one
or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result
: Each time you press the temperature buttons:
The temperature is adjusted by 1°C and
displayed on the control panel
The unit beeps
The air conditioner starts cooling if the room temperature is
higher than the selected temperature.
4
To set the fan speed to...
Then...
Result
: Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page 10.
Cooling Your Room
Remote Control
Control Panel
High Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
Med Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
Low Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
E-8
Airing Your Room
E-9
ENGLISH
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1
If you wish to evacuate stale air outside, push the ventilation lever on the front
of the unit to the right and the open position ( ).
Result:
The air inside the room circulates and stale air is evacuated outside.
Otherwise, push the ventilation lever to the left and the closed position ( ).
Result: The air simply circulates inside the room.
2
If necessary, press the (On/Off) button.
Result
: The operating mode indicator (COOL or FAN) on the
unit comes on.
The air conditioner starts up in the mode selected
when the unit was last used.
The unit beeps twice.
3
If the FAN indicator is not lit up on the unit:
Press the button on the remote control
or
Press the MODE button on the unit one or more times until the FAN
indicator lights up
Result: The unit beeps each time you press MODE.
The air conditioner starts up in Fan mode.
You can change modes at any time.
When the air conditioner is in Fan mode, the
temperature is not displayed; in this case, you do not
need to set the temperature.
4
To set the fan speed to...
Then...
Result
: Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page 10.
High Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
Med Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
Low Press the button on the remote control.
or
Press the on the unit until the
indicator lights up
Remote Control
Control Panel
Adjusting the Air Flow Direction Horizontally
Adjusting the Air Flow Direction Vertically
E-10
Depending on the position of the unit in your room, you can adjust the
orientation of the inner air flow blades on the right-hand side of the
unit, thus increasing the efficiency of the air conditioner.
1 Press the (or on the unit) button on the remote control.
Result
: The inner blades swing automatically left and right.
2
To stop the blades moving left and right, press the
(or on the unit)
button
on the remote control
.
To stop the blades in a specific position and orient the air flow in the
corresponding direction, simply press the
(or on the unit)
button
on the remote control
when the blades are in the desired position.
Again depending on the position of the unit in your room, you can
adjust the orientation of the outer air flow blades on the right-hand
side of the unit.
RECOMMENDATION When... Adjust the blades to face...
Cooling Upwards.
Adjust the air flow blades to the desired position, by pushing them upwards or
downwards.
If you orient the air flow blades downwards and the unit operates in Cool mode
for a long period of time, dew may:
Form on the surface of the blades
Drip from the blades
Remote Control Control Panel
Setting the On timer
E-11
ENGLISH
The On Timer enables you to switch on the air conditioner automatically after
a given period time. You can set the period of time from 1 hour to 24 hours.
You can select the On timer only when the air conditioner is off.
1 Check that the air conditioner has been switched off; if necessary,
press the (On/Off) button.
3
Set the operating time by pressing:
Timer on the remote control.
or
Timer on the unit one or more times.
Possible time is between 1 hour and 24 hour inclusive.
Result
: The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
The air conditioner switches on automatically when the
operating time reaches zero.
You can change the setting mode, fan speed, and air flow direction
after setting the On timer.
To cancel the timer, press:
Timer on the remote control or unit one or more times until " " is
displayed.
or
on the remote control or unit (The air conditioner operates in the mode
selected when the unit was last used.)
To Cancel the On Timer
Remote Control
Control Panel
2
Set the required mode by pressing the appropriate button:
or on the remote control
Mode button on the unit (press it one or more times until the
appropriate operating mode indicator lights up)
Setting the Off Timer
E-12
The Off Timer enables you to switch off the air conditioner
automatically after a given period of time. You can set the period of
time from 1 hour to 24 hours.
You can select the Off timer only when the air conditioner is on.
1 Check that the air conditioner has been switched on; if necessary,
press the (On/Off) button.
2
Set the operating time by pressing:
Timer on the remote control
or
Timer on the unit one or more times.
Possible times are between 1 hour and 24 hour inclusive.
Result
: The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
The air conditioner switches off automatically when the
operating time reaches zero.
You can change the setting mode, fan speed, and air flow direction
after setting the Off timer.
To Cancel the Off Timer
Remote Control
Control Panel
To cancel the timer, press:
Timer on the remote control or unit one or more times until " " is
displayed.
or
on the remote control or unit (The air conditioner operates in the mode
selected when the unit was last used.)
Setting the Sleep timer
E-13
ENGLISH
The Sleep Timer can be used when you are cooling your room to
switch the air conditioner off automatically after a period of 8 hours.
If you wish to switch the unit off at a specific time, refer to page 12.
1 Make sure that you have selected either COOL mode.
2
Press the button on the remote control
or
Press the button on the unit.
Result
: Each time you press a button, the unit beeps.
The “SLEEP” passes through the control panel for about
15 seconds and the " " will be displayed.
The remaining time is displayed and decreased by 1 hour
automatically to indicate the remaining time.
The air conditioner will be controlled as illustration below.
To cancel the timer, press:
on the remote control.
or
on the unit.
Result
: The unit beeps.
The SLEEP indicator is no longer displayed.
The air conditioner operates in the mode selected last.
If you select the Energy Saving mode in the Sleep Timer mode,
the Sleep Timer will be cancelled and the air conditioner will start up
in the Energy Saving mode.
To Cancel the Sleep Timer
Cooling When the temperature has
been increased by 1°C (after
1 hour), it is maintained
for 7 hours.
Remote Control
Control Panel
Selecting Energy Saving mode
E-14
Remote Control
Control Panel
To select the energy saving mode, press the Energy Saver button on the remote
control or unit one or more times until the Energy Saver indicator lights up.
Result
: The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
If you would like the air conditioner to run in Fan mode, do not press
the Energy Saver button. You cannot use the Fan mode in the energy
saving mode.
To stop the energy saving mode, press the Energy Saver button on the
remote control or unit again.
Result: The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
If you wish to save energy when using your air conditioner,
select the energy saving mode with the Energy Saver button.
1
2
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
Cooling 21°C to 32°C approx. 21°C to 43°C approx. 80% or less
21°C to 54°C approx.(Middle East)
Mode Indoor Temperature Outdoor Temperature Indoor Humidity
Higher humidity levels
Water may condense on and drip from the surface of the unit if
it is used for long periods.
Lower temperatures
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Higher temperatures
The automatic protection feature may be triggered and the air
conditioner stopped.
If the air conditioner is used at...
Then...
Cleaning Your Air Conditioner
(✴✴✴✴FA✴✴✴ models)
E-15
ENGLISH
If you...
Will not be using the
air conditioner for a
long period of time
Have not used the air
conditioner for a long
period of time
Then...
Set the fan going for a few hours to
dry the inside of the air conditioner
thoroughly.
Switch the air conditioner off and
unplug it from the wall socket.
Clean the filter and outer surfaces.
Set the fan going for a few hours to dry
the inside of the air conditioner
thoroughly.
Hold the air filter handle, slightly pull it to the left side and open the front grille.
1
Pull the air filter to the right side.
2
Remove all dust on the air filter with a vacuum cleaner or brush.
3
When you have finished, insert the air filter back into its original position.
4
Wipe the surface of the unit with a neutral detergent and then wipe it again
with dry cloth.
(Be sure not to use benzene, solvent or other chemical products.)
5
The removal of the front grille makes it easier to clean the air
conditioner. Open the grille as much as possible.
Be sure to clean the air filter periodically to maintain the air conditioner
in the best condition for a long period of time.
When cleaning the air conditioner, turn it off and pull out
the power plug.
IMPORTANT
Removal and Reassembly of the Front Grille
Grasp the lower part of the
front grille and the air filter
handle, then open the grille.
1
Remove the safety clip and
the front grille.
2
When reassembling the front
grille, you should install the
safety clip again.
3
For user's safety, a safety clip has been installed in the front grille.
Safety clip
CC
CC
AA
AA
UU
UU
TT
TT
II
II
OO
OO
NN
NN
The air conditioner has two or three
grille grooves depending on the model.
Cleaning Your Air Conditioner
(✴✴✴✴AA/GA✴✴✴ models)
E-16
Open the front grille by pulling on the tabs of the unit.
1
Grasp the handle on the air filter and lift it slightly and then out to the front.
2
Remove all dust on the air filter with a vacuum cleaner or brush.
3
When you have finished, insert the air filter back into its original position.
4
Wipe the surface of the unit with a neutral detergent
and then wipe it again with dry cloth.
(Be sure not to use benzene, solvent or other chemical products.)
5
The removal of the front grille makes it easier to clean the air
conditioner. After opening the front grille, lift it up as much as possible,
then pull down to release it.
Be sure to clean the air filter periodically to maintain the air conditioner
in the best condition for a long period of time.
When cleaning the air conditioner, turn it off and pull out the
power plug.
Set the fan to “FAN” and let it run for
a few hours to dry the inside of the air
conditioner thoroughly.
If you... Then...
Will not be using the
air conditioner for a
long period of time
Set the fan to “FAN” and let it for a few
hours to dry the inside of the air
conditioner thoroughly.
Switch the air conditioner off and
unplug it from the wall socket.
Clean the filter and outer surfaces.
Have not used the air
conditioner for a long
period of time
Front grille
Grille groove
Body guide
Front grille
Solving Common Problems
E-17
ENGLISH
Before contacting the after-sales service, perform the following simple checks. They may save
you the time and expense of an unnecessary service call.
The air conditioner does not
operate at all
Check that the circuit breaker used for the air conditioner has not
been triggered.
Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
Check that the operating mode indicator (COOL or FAN) on the unit is
lit up; if necessary press (On/Off) on the remote control or unit.
Problem Explanation/Solution
The air conditioner does not
operate with the remote control
Check that there are no obstacles between you and the unit.
Replace the remote control batteries if necessary.
Check that you are close enough to the unit (seven metres/yards
or less).
No beep is heard when you press
(On/Off) on the remote control
Check that you are pointing the remote control at the remote
control sensor on the unit.
Replace the remote control batteries if necessary.
The air conditioner does not cool Check that the correct operating mode has been selected COOL.
The room temperature may be too low.
Dust may be blocking the air filter; refer to page 15 or 16 for
cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of
the unit.
The air flow direction does not
change when you press the
(or on the unit)button
Check that the air conditioner has been switched on; if necessary,
press (On/Off) on the remote control or unit.
The timer is not correctly triggered Check that the timer has been programmed correctly;
see page 11~13.
Odours are permeated in the
room during air conditioning
Air the room.
Technical Specifications
E-18
Design and specifications are subject to change without notice.
Model
✴✴✴✴✴✴✴
AA/AB
/
AC
✴✴✴✴✴✴✴
BA/BB/BC/BD
✴✴✴✴✴✴✴
CA/CB/CC/CD
✴✴✴✴✴✴✴
DA/DB
✴✴✴✴✴✴✴
EA/EB/EC
Power Supply
115V~, 60Hz
220V(230V)~, 60Hz
230-208V~, 60Hz
200-220V~, 50Hz
220-240V~, 50Hz
Installation (for 60Hz)
E-19
ENGLISH
115V
15 AMP circuit
"parallel" type
230V/208V
20 AMP circuit
"perpendicular" type
230V/208V
15 AMP circuit
"tandem" type
230V/208V
30 AMP circuit
"tandem" type
1
Electrical Requirements
For personal safety:
This appliance must be properly grounded.
Do not, under any circumstances, cut or remove the third grounding
prong from the power cord.
We recommend that you do not use an extension cord or an
adapter plug with this appliance.
Do not change the plug on the power cord of this appliance.
Follow national electrical codes or local codes and ordinances.
If the electric supply provided does not meet the above
specifications, call a licensed electrician.
Aluminum house wiring may pose special problems -
consult a qualified electrician.
This unit requires a separate circuit, serving only this appliance.
Installation
500mm 500mm
75mm
min.
300mm
500mm
Fence, wall
or other
obstacle
150mm min.
“A”
Approx.3˚
Awning
750mm
If the wall is greater than 150mm thick,
cut the wall back on a 45˚ angle if possible.
100mm or more
45˚45˚
Before installation, be sure to check the installation area or the air
conditioner, and drain hose.
Checkpoints prior to installation
Check the cabinet and front grille of the unit for any harmful defects
such as scratches.
1
Be sure to check the power supply.
- Refer to the specifications on the label attached to the unit.
2
Installation Conditions
As the unit is heavy, the wall or window of the installation area should
have sufficient strength and durability for operation of the air conditioner,
and for prevention of any vibration or noise.
If it is weak, reinforcement work should be performed separately.
1
It is advisable to install the air conditioner in the north or west side to
prevent the effect of direct sunlight.
When installing it in the south or east side due to unavoidable
circumstances, it is advisable to install the sunshade to prevent the
direct sunlight.
In this case, take care not to cause any hindrance to the flow of outside air.
2
When installing the air conditioner, be sure to obtain sufficient space on
the rear side of the unit for smooth flow of air.
When operating the air conditioner in closed areas such as inner building
with cooling operation, and result in trouble with the unit.
See the illustration below.
The appliance must be fixed well by screw or similar method.
3
E-20
Model
✴✴✴✴✴✴N✴✴
✴✴✴✴✴✴D✴✴
✴✴✴✴✴✴M✴✴
“A”
180mm
220mm
240mm
Outdoor Side
Indoor Side
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22

Samsung AW12FADBA Manuale utente

Tipo
Manuale utente

in altre lingue