Sony MDR-EX57LP Manuale del proprietario

Categoria
Cuffie
Tipo
Manuale del proprietario
If the earbuds do not fit your ears, try another size. Confirm the size of the
earbuds by checking colour inside (see fig.
-
).
When you change the earbuds’ turn to install them firmly on the headphones
to prevent the earbud from detaching and remaining in your ear.
Earbud sizes (inside colour)
Small
Large
SS*
(Red)
S
(Orange)
M
(Green)
L
(Light blue)
* This size is optional and available at purchase.
To detach an earbud (see fig. -)
While holding the headphone, twist and pull the earbud off.
Tip
If the earbud slips and cannot be detached, wrap it in a dry soft cloth.
To attach an earbud (see fig. -)
Push the parts inside of the earbud into the headphone until the projecting
part of the headphone is fully covered.
Cleaning the earbuds
Remove the earbuds from the headphones, and wash them with a mild
detergent solution.
Specifications
Type: Closed, dynamic / Driver unit: 9 mm, dome type (CCAW) / Power
handling capacity: 100
mW (IEC*)
/ Impedance: 16 Ω at 1 kHz / Sensitivity:
100 dB/mW / Frequency response: 6 – 23,000 Hz / Cord: 1.2 m, OFC litz cord
neck-chain / Mass: Approx. 3 g / Plug: Gold-plated L-shaped stereo mini plug
/ Supplied accessories: Earbuds (S × 2, M × 2, L × 2), Carrying pouch (1),
Cord adjuster (1), Operating Instructions (1)
* IEC = International Electrotechnical Commission
Design and specifications are subject to change without notice.
Precautions
Please keep your headphones clean at all times especially inside the rubber
earbud. (see fig.
)
If any dust or ear wax is inside the earbud, you may experience some listening
difficulties.
Listening with headphones at high volume may affect your hearing. For traffic
safety, do not use while driving or cycling.
Do not put weight or pressure on the headphones as it may cause the
headphones to deform during long storage.
The earbuds may deteriorate due to long-term storage or use.
Install the earbuds firmly onto the headphones. If an earbud accidentally
detaches and is left in your ear, it may cause injury.
Note on static electricity
In particularly dry air conditions, mild tingling may be felt on your ears. This
is a result of static electricity accumulated in the body, and not a malfunction
of the headphones.
The effect can be minimized by wearing clothes made from natural materials.
EP-EX10A is available (sold separately) as optional replacement earbuds.
EP-EX10A offers 4 types of the earbuds: SS, S, M and L.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European
countries with separate collection systems)
This symbol on the product or on its packaging indicates that
this product shall not be treated as household waste. Instead it
shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact
your local Civic Office, your household waste disposal service or the shop
where you purchased the product.
Notice for customers: the following information is only applicable to
equipment sold in countries applying EU directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-
ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and
product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters please refer to the
addresses given in separate service or guarantee documents.
Français
Casque d’écoute stéréo
Caractéristiques
Corps fin pour un port confortable
Aimants au néodyme haute puissance de 400kJ/m
3
pour des aigus et des
médiums hautement précis avec des graves profonds
Structure d’oreillette inclinée pour un port stable et confortable
Système de réglage du cordon pratique fourni
Oreillettes en caoutchouc de silicone hybride (S, M, L) fournies pour un port
sûr et une utilisation prolongée confortable (voir fig.
)
Etui de transport pratique fourni
Utilisation
Port des écouteurs (voir fig. )
1
Repérez les écouteurs droit et gauche et saisissez-les de la
manière illustrée.
2
Ajustez les écouteurs aux oreilles, de la manière illustrée.
3
Réglez les oreillettes de manière à ce quelles restent bien en place
dans les oreilles.
Comment utiliser le système de réglage du cordon fourni
(voir fig. )
Vous pouvez régler la longueur du cordon en l’enroulant sur le système de
réglage du cordon.
(Le cordon peut être enroulé jusqu’à 50 cm sur le système de réglage du
cordon. Si vous lenroulez davantage, il se détache facilement du système de
réglage du cordon.)
1
Enroulez le cordon.
2
Insérez le cordon dans la fente pour le maintenir en place.
Remarque
N’enroulez pas la fiche ou l’embranchement du cordon, car cela le
soumettrait à une tension susceptible de briser un fil.
Installation correcte des oreillettes (voir fig. )
Si les oreillettes ne sadaptent pas bien aux oreilles, vous risquez de ne pas
entendre les sons les plus graves. Pour profiter d’un son de qualité supérieure,
utilisez une autre taille doreillettes ou réglez la position des oreillettes afin
qu’elles s’adaptent bien à vos oreilles et soient confortablement installées.
Si les oreillettes ne tiennent pas dans les oreilles, essayez une autre taille.
Vérifiez la taille des oreillettes en contrôlant la couleur à l’intérieur de celles-ci
(voir fig.
-
).
Lorsque vous changez les oreillettes, tournez-les pour les installer fermement
sur les écouteurs afin d’éviter qu’elles se détachent et restent dans les oreilles.
Taille des oreillettes (couleur intérieure)
Petite
Grande
SS*
(Rouge)
S
(Orange)
M
(Verte)
L
(Bleu clair)
* Cette taille est vendue en option.
Pour détacher une oreillette (voir fig. -)
Tout en tenant lécouteur, tournez l’oreillette et détachez-la.
Conseil
Si l’oreillette glisse et ne se détache pas, entourez-la d’un linge doux et sec.
Pour fixer une oreillette (voir fig. -)
Enfoncez l’intérieur de loreillette dans l’écouteur jusqu’à ce que la partie
saillante de celui-ci soit complètement recouverte.
Nettoyage des oreillettes
Détachez les oreillettes des écouteurs et lavez-les avec une solution détergente
douce.
Spécifications
Type : Fermé, dynamique / Transducteur : 9 mm, type à dôme (CCAW) /
Puissance admissible : 100 mW (CEI*) / Impédance : 16 Ω à 1 kHz /
Sensibilité : 100 dB/mW / Réponse en fréquence : 6 – 23 000 Hz / Cordon :
1,2 m, cordon litz OFC tour de cou / Poids : Environ 3 g / Fiche : Mini-fiche
stéréo en L plaquée or / Accessoires fournis : Oreillettes (S × 2, M × 2, L × 2),
Etui de transport (1), Système de réglage du cordon (1), Mode d'emploi (1)
* CEI = Commission Electrotechnique Internationale
La conception et les spécifications sont susceptibles d’être modifiées sans avis
préalable.
Précautions
Veillez toujours à maintenir vos écouteurs propres, particulièrement
l’intérieur des oreillettes en caoutchouc. (voir fig.
)
Si de la poussière ou du cérumen pénètre à l’intérieur de l’oreillette, vous
risquez de rencontrer des difficultés à l’écoute.
Lutilisation des écouteurs à un niveau de volume élevé peut altérer louïe.
Pour une conduite sûre, ne portez pas les écouteurs au volant ou lorsque vous
circulez à vélo.
Ne posez aucun poids et évitez toute pression sur les écouteurs lorsque vous
les rangez pour une période prolongée, car cela risque de les déformer.
Les oreillettes peuvent se détériorer au terme d’une utilisation ou d’un
stockage prolongés.
Fixez correctement les oreillettes sur les écouteurs. Si une oreillette se
détachait accidentellement et restait coincée dans loreille, elle risquerait de
vous blesser.
Remarque à propos de l’électricité statique
Si l’air est particulièrement sec, vous pouvez ressentir de légers fourmillements
dans les oreilles. Cela sexplique par laccumulation délectricité statique dans le
corps et il ne sagit pas d’un dysfonctionnement des écouteurs.
Vous pouvez atténuer cet effet en portant des vêtements en matière naturelle.
Des oreillettes de rechange EP-EX10A sont disponibles en option (vendues
séparément).
Les oreillettes EP-EX10A sont disponibles en 4 formats : SS, S, M et L.
Traitement des appareils électriques et électroniques en
fin de vie (Applicable dans les pays de l’Union
Européenne et aux autres pays européens disposant de
systèmes de collecte sélective)
Ce symbole, apposé sur le produit ou sur son emballage,
indique que ce produit ne doit pas être traité avec les déchets
ménagers. Il doit être remis à un point de collecte approprié
pour le recyclage des équipements électriques et électroniques.
En s’assurant que ce produit est bien mis au rebut de manière appropriée, vous
aiderez à prévenir les conséquences négatives potentielles pour
l’environnement et la santé humaine. Le recyclage des matériaux aidera à
préserver les ressources naturelles. Pour toute information supplémentaire au
sujet du recyclage de ce produit, vous pouvez contacter votre municipalité,
votre déchetterie ou le magasin où vous avez acheté le produit.
Avis à l’intention des clients : les informations suivantes
s’appliquent uniquement aux appareils vendus dans des pays qui
appliquent les directives de l’Union Européenne
Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japon. Le représentant autorisé pour les questions de
compatibilité électromagnétique (EMC) et la sécurité des produits est Sony
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne. Pour
toute question relative au SAV ou à la garantie, merci de bien vouloir vous
référer aux coordonnées contenues dans les documents relatifs au SAV ou la
garantie.
Deutsch
Stereokopfhörer
Merkmale
Schmales Gehäuse für einen angenehmen Sitz
Neodymmagneten mit hoher Magnetleistung (400 kJ/m
3
) erzeugen
hochauflösende Höhen und einen Mittenbereich mit kräftigen Bässen
Abgewinkelte Ohrpolster für stabilen und angenehmen Tragekomfort
Komfortable Vorrichtung zum Einstellen der Kabellänge mitgeliefert
Hybrid-Silikon-Gummi-Ohrpolster (S, M, L) mitgeliefert für sicheren Halt
und langen Tragekomfort (siehe Abb.
)
Praktischer Transportbeutel mitgeliefert
Gebrauch
Tragen der Kopfhörer (siehe Abb. )
1
Stellen Sie fest, welcher der rechte und linke Kopfhörer ist, und
halten Sie sie, wie in der Abbildung dargestellt.
2
Stecken Sie die Kopfhörer wie in der Abbildung dargestellt in die
Ohren, so dass sie bequem sitzen.
3
Rücken Sie die Ohrpolster zurecht, bis sie gut im Ohr sitzen.
Verwendung der mitgelieferten Kabeleinstellvorrichtung
(siehe Abb. )
Sie können die Kabellänge anpassen, indem Sie das Kabel um die
Kabeleinstellvorrichtung wickeln.
(Bis zu 50 cm des Kabels können auf die Kabeleinstellvorrichtung aufgerollt
werden. Wenn Sie mehr aufrollen, löst sich das Kabel leicht von der
Kabeleinstellvorrichtung.)
1
Wickeln Sie das Kabel auf.
2
Drücken Sie das Kabel in die Aussparung, um es zu sichern.
Hinweis
Wickeln Sie nicht den Stecker oder die Kabelverzweigung auf, da dies eine
Belastung für das Kabel ist und zu einem Kabelbruch führen kann.
So verwenden Sie die Ohrpolster richtig (siehe Abb. )
Wenn die Ohrpolster nicht richtig im Ohr sitzen, sind tiefe Bassklänge unter
Umständen nicht zu hören. Sie können die Tonqualität verbessern, indem Sie
Ohrpolster einer anderen Größe wählen oder die Position der Ohrpolster
korrigieren, so dass diese gut sitzen und fest anliegen.
Wenn die Ohrpolster Ihnen nicht passen, versuchen Sie es mit Ohrpolstern in
einer der anderen Größen. Die Größe der Ohrpolster erkennen Sie an der
Farbe im Inneren (siehe Abb.
-
).
Wenn Sie die Ohrpolster austauschen, drehen Sie sie, um sie fest an den
Kopfhörern anzubringen, damit sie sich nicht lösen und im Ohr stecken
bleiben.
Größen Ohrpolster (Innenfarbe)
Klein
Groß
SS*
(rot)
S
(orange)
M
(grün)
L
(hellblau)
* Diese Größe ist gesondert erhältlich und kann beim Kauf des Produkts
erworben werden.
So nehmen Sie ein Ohrpolster ab (siehe Abb. -)
Halten Sie den Kopfhörer fest, drehen Sie das Ohrpolster und ziehen Sie es ab.
Tipp
Wenn das Ohrpolster rutschig ist und nicht gelöst werden kann, wickeln Sie
es in ein weiches, trockenes Tuch.
So bringen Sie ein Ohrpolster an (siehe Abb. -)
Drücken Sie die Teile im Inneren des Ohrpolsters in die Kopfhörer, bis der
vorstehende Teil des Kopfhörers vollständig bedeckt ist.
Reinigen der Ohrpolster
Nehmen Sie die Ohrpolster von den Kopfhörern ab und waschen Sie sie mit
einer milden Reinigungslösung.
Technische Daten
Typ: Geschlossen, dynamisch / Treibereinheit: 9 mm (CCAW), Kalotte /
Belastbarkeit: 100 mW (IEC*) / Impedanz: 16 Ω bei 1 kHz / Empfindlichkeit:
100 dB/mW / Frequenzgang: 6 – 23.000 Hz / Kabel: 1,2 m, OFC-Litzenkabel
mit Nackenkabel / Gewicht: ca. 3 g / Stecker: Vergoldeter Stereoministecker in
L-Form / Mitgeliefertes Zubehör: Ohrpolster (S × 2, M × 2, L × 2),
Tragebeutel (1), Kabeleinstellvorrichtung (1), Bedienungsanleitung (1)
* IEC = International Electrotechnical Commission
Änderungen, die dem technischen Fortschritt dienen, bleiben vorbehalten.
Sicherheitsmaßnahmen
Bitte halten Sie die Kopfhörer jederzeit sauber, vor allem auch innen am
Gummiohrpolster. (siehe Abb.
)
Bei Staub oder sonstigen Verunreinigungen auf dem Ohrpolster ist der Ton
möglicherweise schlecht zu hören.
Wenn Sie bei hoher Lautstärke mit Kopfhörern Musik hören, kann es zu
Gehörschäden kommen. Verwenden Sie Kopfhörer aus Gründen der
Verkehrssicherheit nicht beim Fahren von Kraftfahrzeugen oder beim
Fahrradfahren.
Setzen Sie die Kopfhörer nicht Gewichten oder Druck aus, da diese sich
andernfalls bei längerer Lagerung verformen können.
Der Zustand der Ohrpolster kann sich bei langfristiger Lagerung oder
Nutzung verschlechtern.
Bringen Sie die Ohrpolster fest an den Kopfhörern an. Wenn sich ein
Ohrpolster
versehentlich löst und im Ohr verbleibt, kann es Verletzungen
verursachen.
Hinweis zur statischen Elektrizität
Bei besonders trockener Luft stellen Sie möglicherweise ein leichtes Kribbeln
in den Ohren fest. Dies rührt durch die statische Elektrizität her, mit der sich
Ihr Körper auflädt. Dies stellt keine Fehlfunktion der Kopfhörer dar.
Der Effekt kann verringert werden, wenn Sie Kleidung tragen, die aus
Naturstoffen hergestellt ist.
Als Ersatzohrpolster können Sie Ohrpolster mit der Modellbezeichnung
EP-EX10A (gesondert erhältlich) erwerben.
Die Ohrpolster EP-EX10A sind in 4 Größen erhältlich: SS, S, M und L.
Entsorgung von gebrauchten elektrischen und
elektronischen Geräten (anzuwenden in den Ländern
der Europäischen Union und anderen europäischen
Ländern mit einem separaten Sammelsystem für diese
Geräte)
Das Symbol auf dem Produkt oder seiner Verpackung weist
darauf hin, dass dieses Produkt nicht als normaler
Haushaltsabfall zu behandeln ist, sondern an einer
Annahmestelle für das Recycling von elektrischen und elektronischen
Geräten abgegeben werden muss. Durch Ihren Beitrag zum korrekten
Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer
Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen
gefährdet. Materialrecycling hilft, den Verbrauch von Rohstoffen zu
verringern. Weitere Informationen über das Recycling dieses Produkts
erhalten Sie von Ihrer Gemeinde, den kommunalen Entsorgungsbetrieben
oder dem Geschäft, in dem Sie das Produkt gekauft haben.
Hinweis für Kunden: Die folgenden Informationen gelten nur für
Geräte, die in Ländern verkauft werden, in denen EU-Richtlinien
gelten
Der Hersteller dieses Produktes ist Sony Corporation, 1-7-1 Konan Minato-ku
Tokio, 108-0075 Japan. Bevollmächtigter für EMV und Produktsicherheit ist
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Deutschland. Für Kundendienstoder Garantieangelegenheiten wenden Sie
sich bitte an die in Kundendienst- oder Garantiedokumenten genannten
Adressen.
Español
Auriculares estéreo
Características
Receptáculo compacto para un ajuste cómodo
Los imanes de neodimio de alta potencia de 400 kJ/m
3
producen sonidos
agudos y medios de alta resolución con graves potentes
La estructura de las almohadillas se ha diseñado en ángulo para un ajuste
estable y cómodo
Práctico regulador de cable suministrado
Almohadillas de goma de silicona híbridas (tallas S, M o L) suministradas
para un ajuste seguro y mayor comodidad durante más tiempo
(consulte la figura
)
Útil bolsa de transporte suministrada
Utilización
Colocación de los auriculares (consulte la figura )
1
Localice los auriculares derecho e izquierdo y sujételos tal como
se indica en la ilustración.
2
Inserte correctamente los auriculares en las orejas, tal como se
indica en la ilustración.
3
Ajuste las almohadillas para que se adapten correctamente a los
oídos.
Utilización del regulador de cable suministrado
(consulte la figura )
Para ajustar la longitud del cable, enróllelo en el regulador del cable.
(Es posible enrollar hasta 50 cm de cable en el regulador. Si supera este límite,
el cable puede desprenderse del regulador con facilidad).
1
Enrolle el cable.
2
Presione el cable en el orificio de la ranura para fijarlo en su lugar.
Nota
No enrolle la clavija ni la sección dividida del cable, ya que el cable se
tensaría y podrían romperse los hilos.
Cómo colocar las almohadillas correctamente
(consulte la figura )
Si las almohadillas no se adaptan a sus oídos correctamente, es posible que no
pueda escuchar el sonido de los graves bajos. Si desea disfrutar de una mejor
calidad de sonido, cambie la talla de las almohadillas, o bien, ajuste la posición
de estas para que se coloquen en sus oídos cómodamente y se adapten a ellos
de forma correcta.
Si las almohadillas no se adaptan a sus oídos, pruebe otra talla. Compruebe la
talla de las almohadillas según el color de su interior
(consulte la figura
-
).
Cuando cambie las almohadillas, colóquelas firmemente en los auriculares
para evitar que se desprendan y permanezcan en sus orejas.
Tallas de almohadillas (color interior)
Pequeña
Grande
SS*
(Rojo)
S
(Naranja)
M
(Verde)
L
(Azul claro)
* Esta talla es opcional y se encuentra disponible en el establecimiento de
venta del producto.
Extracción de las almohadillas (consulte la figura -)
Mientras sostiene el auricular, gire y retire la almohadilla.
Sugerencia
Si la almohadilla resbala y no es posible extraerla, envuélvala en un paño
suave y seco.
Colocación de las almohadillas (consulte la figura -)
Presione las partes interiores de la almohadilla sobre el auricular hasta cubrir
completamente la parte saliente de este.
Limpieza de las almohadillas
Extraiga las almohadillas de los auriculares y límpielas con una solución de
detergente poco concentrada.
Especificaciones
Tipo: cerrado, dinámico / Unidad auricular: 9 mm, tipo cúpula (CCAW) /
Capacidad de potencia: 100 mW (IEC*) / Impedancia: 16 Ω a 1 kHz /
Sensibilidad: 100 dB/mW / Frecuencia de respuesta: 6 – 23.000 Hz / Cable:
cable litz OFC de 1,2 m tipo collar / Peso: aprox. 3 g / Conector: miniclavija
estéreo dorada en forma de L / Accesorios suministrados: almohadillas (S × 2,
M × 2, L × 2), bolsa de transporte (1), regulador de cable (1), manual de
instrucciones (1)
* IEC = Comisión Electrotécnica Internacional
El diseño y las especificaciones están sujetos a cambios sin previo aviso.
Precauciones
Mantenga los auriculares siempre limpios, en especial la parte interior de la
almohadilla de goma (consulte la figura
).
Si la almohadilla contiene cualquier partícula de polvo o de cera, es posible
que experimente dificultades para escuchar el sonido.
El uso de los auriculares con un volumen demasiado alto podría dañar sus
oídos. Por razones de seguridad vial, no los utilice mientras conduzca o vaya
en bicicleta.
Durante los períodos de almacenamiento prolongados no ponga ningún
objeto que pese o que ejerza presión sobre los auriculares, ya que podrían
deformarse.
Es posible que las almohadillas se deterioren con el paso del tiempo a causa
de las condiciones de almacenamiento y del uso.
Coloque las almohadillas firmemente en los auriculares. Si una almohadilla
se
desprendiera accidentalmente y se quedara en su oído, podría causarle
lesiones.
Nota sobre electricidad estática
En condiciones de aire especialmente seco, es posible que sienta un ligero
cosquilleo en sus oídos. Esto se debe a la electricidad estática acumulada en su
cuerpo, no a un funcionamiento anómalo de los auriculares.
Puede minimizar este efecto si elige prendas de vestir confeccionadas con
materiales naturales.
El modelo EP-EX10A está disponible (se vende por separado) como
almohadillas de repuesto opcionales.
El modelo EP-EX10A ofrece 4 tipos de almohadillas: SS, S, M y L.
Tratamiento de los equipos eléctricos y electrónicos al
final de su vida útil (aplicable en la Unión Europea y en
países europeos con sistemas de recogida selectiva de
residuos)
Este símbolo en el equipo o el embalaje indica que el presente
producto no puede ser tratado como residuos domésticos
normales, sino que debe entregarse en el correspondiente
punto de recogida de equipos eléctricos y electrónicos. Al
asegurarse de que este producto se desecha correctamente, Ud. ayuda a
prevenir las consecuencias negativas para el medio ambiente y la salud
humana que podrían derivarse de la incorrecta manipulación en el momento
de deshacerse de este producto. El reciclaje de materiales ayuda a conservar
los recursos naturales. Para recibir información detallada sobre el reciclaje de
este producto, póngase en contacto con el ayuntamiento, el punto de recogida
más cercano o el establecimiento donde ha adquirido el producto.
Aviso para los clientes: la información siguiente resulta de
aplicación solo a los equipos comercializados en países afectados
por las directivas de la UE
El fabricante de este producto es Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japón. El representante autorizado para EMC y seguridad en
el producto es Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart,Alemania. Para cualquier asunto relacionado con servicio o garantía
por favor diríjase a la dirección indicada en los documentos de servicio o
garantía adjuntados con el producto.
Italiano
Cuffie stereo
Caratteristiche
Alloggiamento sottile per un comodo adattamento
Magneti al neodimio ad alta potenza da 400kJ/m
3
producono toni alti e medi
ad alta risoluzione con bassi potenti
Auricolari angolati per garantire stabilità e comfort
Comodo dispositivo di regolazione del cavo in dotazione
Auricolari in gomma siliconica ibrida (S, M, L) in dotazione per una
portabilità sicura e un comfort duraturo (vedere fig.
)
Pratica custodia di trasporto in dotazione
Modalità d’uso
Inserimento delle cuffie (vedere fig. )
1
Individuare la cuffia destra e sinistra e sorreggerle come mostrato
in figura.
2
Inserire correttamente le cuffie nelle orecchie, come mostrato in
figura.
3
Regolare gli auricolari in modo che si adattino perfettamente alle
orecchie.
Modalità d’uso del dispositivo di regolazione del cavo in
dotazione (vedere fig. )
È possibile regolare la lunghezza del cavo avvolgendo il cavo stesso sul relativo
dispositivo di regolazione.
(Il cavo può essere avvolto sul relativo dispositivo di regolazione fino a 50 cm;
se lo si avvolge ulteriormente, il cavo viene via facilmente dal dispositivo).
1
Avvolgere il cavo.
2
Spingere il cavo nel foro a incastro per bloccarlo.
Nota
Non avvolgere la spina o dividere la sezione del cavo, poiché ciò metterebbe
in tensione il cavo e potrebbe causarne la rottura.
Installazione corretta degli auricolari (vedere fig. )
Se gli auricolari non si adattano correttamente alle orecchie, i toni bassi
potrebbero non essere uditi. Per ottenere una qualità audio migliore, sostituire
gli auricolari con auricolari di unaltra misura oppure regolare la posizione
degli auricolari in modo che siano inseriti comodamente e si adattino in
modo corretto alle orecchie.
Se gli auricolari non vanno bene per le proprie orecchie, provare con unaltra
misura. Controllare la misura degli auricolari facendo riferimento al colore
all’interno (vedere fig.
-
).
Quando si sostituiscono gli auricolari, ruotarli per installarli saldamente sulle
cuffie ed evitare che si stacchino e rimangano nellorecchio.
Misure degli auricolari (colore interno)
Piccola
Grande
SS*
(rosso)
S
(arancione)
M
(verde)
L
(azzurro)
* Questa misura è opzionale ed è disponibile al momento dell’acquisto.
Rimozione di un auricolare (vedere fig. -)
Tenendo la cuffia, ruotare e tirar via l’auricolare.
Suggerimento
Se l’auricolare scivola e non si riesce a rimuoverlo, avvolgerlo con un panno
morbido asciutto.
Applicazione di un auricolare (vedere fig. -)
Spingere le parti all’interno dell’auricolare nella cuffia fino a ricoprire
completamente la parte sporgente della cuffia.
Pulizia degli auricolari
Rimuovere gli auricolari dalle cuffie e lavarli con una soluzione detergente
delicata.
Caratteristiche tecniche
Tipo: chiuso, dinamico / Unità pilota: 9 mm, tipo a cupola (CCAW) /
Capacità di potenza: 100 mW (IEC*) / Impedenza: 16 Ω a 1 kHz / Sensibilità:
100 dB/mW / Risposta in frequenza: 6 – 23.000 Hz / Cavo: 1,2 m, collare con
cavo litz OFC / Massa: circa 3 g / Spina: minispina stereo a L placcata in oro /
Accessori in dotazione: Auricolari (S × 2, M × 2, L × 2), Custodia di trasporto
(1), Dispositivo di regolazione del cavo (1), Istruzioni per l’uso (1)
* IEC = Commissione Elettrotecnica Internazionale
Il design e le caratteristiche tecniche sono soggetti a modifiche senza
preavviso.
Precauzioni
Mantenere le cuffie sempre pulite, specialmente l’interno degli auricolari in
gomma (vedere fig.
).
Se si sono depositati polvere o cerume all’interno degli auricolari, è possibile
che si riscontrino difficoltà di ascolto.
Luso delle cuffie ad alto volume può incidere sull’udito. Per la sicurezza
stradale, non utilizzarle quando si guida o si va in bicicletta.
Non collocare pesi e non esercitare pressione sulle cuffie: ciò potrebbe
deformare le cuffie durante periodi di inutilizzo prolungati.
Gli auricolari potrebbero deteriorarsi in seguito all’uso o all’inutilizzo
prolungato.
Installare in modo saldo gli auricolari sulle cuffie. Se un auricolare
si stacca
accidentalmente e rimane all’interno dell’orecchio, potrebbero verificarsi
lesioni.
Nota sull’elettricità statica
In condizioni di aria molto secca, si potrebbe avvertire una lieve sensazione di
formicolio nelle orecchie. La causa è l’elettricità statica accumulata nel corpo e
non un problema di funzionamento delle cuffie.
Leffetto può essere ridotto al minimo indossando abiti realizzati in tessuti
naturali.
EP-EX10A (in vendita separatamente) è disponibile come auricolari di
ricambio opzionali.
EP-EX10A offre 4 tipi di auricolari: SS, S, M e L.
Trattamento del dispositivo elettrico od elettronico a
fine vita (applicabile in tutti i paesi dell’Unione Europea
e in altri paesi europei con sistema di raccolta
differenziata)
Questo simbolo sul prodotto o sulla confezione indica che il
prodotto non deve essere considerato come un normale rifiuto
domestico, ma deve invece essere consegnato ad un punto di
raccolta appropriato per il riciclo di apparecchi elettrici ed
elettronici. Assicurandovi che questo prodotto sia smaltito correttamente, voi
contribuirete a prevenire potenziali conseguenze negative per l’ambiente e per
la salute che potrebbero altrimenti essere causate dal suo smaltimento
inadeguato. Il riciclaggio dei materiali aiuta a conservare le risorse naturali.
Per informazioni più dettagliate circa il riciclaggio di questo prodotto, potete
contattare l’ufficio comunale, il servizio locale di smaltimento rifiuti oppure il
negozio dove l’avete acquistato.
Avviso per i clienti: le seguenti informazioni riguardano
esclusivamente gli apparecchi venduti in paesi in cui sono applicate
le direttive UE
Il fabbricante di questo prodotto è Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075, Giappone. Il rappresentante autorizzato ai fini della
Compatibilità Elettromagnetica e della sicurezza del prodotto è Sony
Deutschland GmbH, Hedelfinger Strasse 61, 70327, Stoccarda Germania. Per
qualsiasi problema relativo all’assistenza o alla garanzia, si prega di fare
riferimento agli indirizzi indicati nei documenti di assistenza e garanzia
forniti con il prodotto.
Nederlands
Stereohoofdtelefoon
Kenmerken
Slanke behuizing voor een comfortabele pasvorm
Krachtige neodymiummagneten van 400kJ/m
3
produceren hoogwaardige
midden- en hoge tonen en krachtige lage tonen
Oordopjes in hoek geplaatst voor een vast en comfortabel gebruik
Bijgeleverde handige kabelregelaar
Bijgeleverde hybride oordopjes uit siliconenrubber (S, M, L) voor een goede
pasvorm en langdurig gebruikscomfort (zie afb.
)
Bijgeleverde handige draagtas
Hoe te gebruiken
De hoofdtelefoon dragen (zie afb. )
1
Neem de rechter- en de linkerzijde van de hoofdtelefoon in uw
rechter- en linkerhand en houd deze vast zoals weergegeven.
2
Plaats de hoofdtelefoon zoals weergegeven comfortabel in uw
oren.
3
Beweeg de oordopjes eventueel wat heen en weer om deze goed
te doen passen.
De bijgeleverde kabelregelaar gebruiken (zie afb. )
U kunt de kabellengte regelen door de kabel te winden rond de kabelregelaar.
(U kunt tot 50 cm kabel rond de kabelregelaar winden. Als u de kabel verder
rond de kabelregelaar windt, raakt deze sneller los van de kabelregelaar.)
1
Wind de kabel rond de kabelregelaar.
2
Druk de kabel in de kabelopening om deze vast te klemmen.
Opmerking
Zorg ervoor dat u de stekker of het gesplitste deel van de kabel niet rond de
kabelregelaar windt; hierdoor wordt er te veel druk op de kabel uitgeoefend,
die vervolgens kan breken.
De oordopjes correct bevestigen (zie afb. )
Als de oordopjes niet perfect in uw oren passen, is het mogelijk dat u lage
tonen niet hoort. Om te kunnen genieten van een betere geluidskwaliteit,
gebruikt u een ander formaat oordopjes of past u de positie van de oordopjes
aan zodat deze comfortabel in uw oren passen.
Als de oordopjes niet in uw oren passen, probeert u een ander formaat. U
kunt het formaat van de oordopjes controleren aan de hand van de kleur aan
de binnenkant (zie afb.
-
).
Wanneer u de oordopjes vervangt, draait u deze stevig op de hoofdtelefoon
om te verhinderen dat een oordopje loskomt en in uw oor achterblijft.
Formaten van oordopjes (binnenkleur)
Klein
Groot
SS*
(Rood)
S
(Oranje)
M
(Groen)
L
(Lichtblauw)
* Dit formaat is optioneel en kan apart worden gekocht.
Een oordopje losmaken (zie afb. -)
Houd de hoofdtelefoon vast en draai en trek het oordopje eraf.
Tip
Als het oordopje uit uw handen glijdt en u er niet in slaagt het los te maken,
draait u het in een zachte droge doek.
Een oordopje bevestigen (zie afb. -)
Druk het binnenste deel van het oordopje op de hoofdtelefoon tot het
uitstekende deel van de hoofdtelefoon volledig bedekt is.
De oordopjes reinigen
Verwijder de oordopjes van de hoofdtelefoon en reinig deze met een mild
zeepsopje.
Technische gegevens
Type: gesloten, dynamisch / Driver: 9 mm, dome-type (CCAW) /
Vermogenscapaciteit: 100 mW (IEC*) / Impedantie: 16 Ω bij 1 kHz /
Gevoeligheid: 100 dB/mW / Frequentiebereik: 6 – 23.000 Hz / Kabel: 1,2 m,
OFC litz-kabel die in de nek kan worden gedragen / Gewicht: ong. 3 g /
Stekker: goudkleurige L-vormige stereoministekker / Bijgeleverde accessoires:
Oordopjes (S × 2, M × 2, L × 2), Draaghoes (1), Kabelregelaar (1),
Gebruiksaanwijzing (1)
* IEC = International Electrotechnical Commission
Ontwerp en technische gegevens kunnen zonder voorafgaande kennisgeving
worden gewijzigd.
Voorzorgsmaatregelen
Zorg ervoor dat uw hoofdtelefoon altijd hygiënisch is, vooral aan de
binnenkant van de rubberen oordopjes (zie afb.
).
Als er zich stof of oorsmeer in de oordopjes bevindt, is het mogelijk dat
geluiden minder goed hoorbaar zijn.
Wanneer u de hoofdtelefoon gebruikt bij een hoog volume, kan dit
gehoorschade veroorzaken. Gebruik voor uw veiligheid de hoofdtelefoon niet
tijdens het rijden of fietsen.
Plaats geen gewicht op de hoofdtelefoon en oefen er geen druk op uit; dit kan
er namelijk voor zorgen dat de hoofdtelefoon vervormd raakt wanneer deze
lang wordt opgeborgen.
De oordopjes kunnen verslijten na lang gebruik of een lange opbergtijd.
Bevestig de oordopjes stevig op de hoofdtelefoon. Als een oordopje per
ongeluk loslaat en in uw oor achterblijft, kan dit letsels veroorzaken.
Opmerking over statische elektriciteit
Bij een erg droge lucht is het mogelijk dat u lichte tintelingen voelt op uw
oren. Dit is het gevolg van statische elektriciteit die in uw lichaam wordt
opgebouwd en duidt niet op een defect van de hoofdtelefoon.
Dit effect kan worden geminimaliseerd door kledij te dragen die gemaakt is
uit natuurlijke materialen.
EP-EX10A is verkrijgbaar (los verkrijgbaar) als optionele vervangende
oordopjes.
EP-EX10A bestaat uit 4 types oordopjes: SS, S, M en L.
Verwijdering van oude elektrische en elektronische
apparaten (Toepasbaar in de Europese Unie en andere
Europese landen met gescheiden ophaalsystemen)
Het symbool op het product of op de verpakking wijst erop dat
dit product niet als huishoudelijk afval mag worden
behandeld. Het moet echter naar een plaats worden gebracht
waar elektrische en elektronische apparatuur wordt gerecycled.
Als u ervoor zorgt dat dit product op de correcte manier wordt
verwijderd, voorkomt u voor mens en milieu negatieve gevolgen die zich
zouden kunnen voordoen in geval van verkeerde afvalbehandeling. De
recycling van materialen draagt bij tot het vrijwaren van natuurlijke bronnen.
Voor meer details in verband met het recyclen van dit product, neemt u
contact op met de gemeentelijke instanties, het bedrijf of de dienst belast met
de verwijdering van huishoudafval of de winkel waar u het product hebt
gekocht.
Opmerking voor klanten: de volgende informatie geldt enkel voor
apparatuur verkocht in landen waar de EU-richtlijnen van kracht zijn
De fabricant van dit product is Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japan. De geauthoriseerde vertegenwoordiging voor EMC en
produkt veiligheid is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327
Stuttgart, Duitsland. Voor service- of garantiezaken verwijzen wij u graag naar
de addressen in de afzonderlijke service/garantie documenten.
Português
Auscultadores estéreo
Características
Caixa fina para um encaixe confortável
O íman de neodímio de 400kJ/m
3
muito potente produz agudos e médios de
elevada resolução, assim como graves profundos
Estrutura angular de auricular para uma utilização estável e confortável
Prático regulador de cabo fornecido
Auriculares em borracha de silicone híbrido (S, M, L) fornecidos para um
encaixe seguro e conforto de utilização duradouro (ver fig.
)
Prática caixa de transporte fornecida
Como utilizar
Utilizar os auscultadores (ver fig. )
1
Determine qual o auscultador direito e esquerdo e pegue nos
mesmos conforme a ilustração.
2
Coloque os auscultadores nos ouvidos de modo bem ajustado,
conforme a ilustração.
3
Ajuste o auricular de modo a ficar bem encaixado no ouvido.
Como utilizar o regulador de cabo fornecido (ver fig. )
Pode regular o comprimento do cabo enrolando-o no regulador de cabo.
(O cabo pode ser enrolado no regulador de cabo em até 50 cm. Se enrolar um
comprimento superior, o cabo sai do regulador de cabo facilmente.)
1
Enrole o cabo.
2
Pressione o cabo no sentido do orifício da ranhura para fixá-lo no
lugar.
Nota
Não enrole a ficha ou a secção dividida do cabo, uma vez que colocará o
cabo sob tensão, podendo quebrá-lo.
Como instalar os auriculares correctamente (ver fig. )
Se os auriculares não encaixarem correctamente nos ouvidos, pode não
conseguir ouvir os sons graves. Para desfrutar de uma melhor qualidade de
som, utilize auriculares com outro tamanho ou ajuste a posição dos
auriculares de modo a ajustarem-se confortavelmente aos seus ouvidos.
Se os auriculares não encaixarem devidamente nos ouvidos, experimente
outro tamanho. Confirme o tamanho dos auriculares verificando a cor do
interior (ver fig.
-
).
Quando mudar de auriculares, rode-os para instalá-los de modo firme nos
auscultadores e evitar que os auriculares saiam e permaneçam dentro do
ouvido.
Tamanhos de auricular (cor interior)
Pequeno
Grande
SS*
(Vermelho)
S
(
Cor-de-laranja
)
M
(Verde)
L
(Azul claro)
* Este tamanho é opcional e está disponível no mercado.
Para retirar um auricular (ver fig. -)
Enquanto segura nos auscultadores, torça e puxe o auricular para fora.
Sugestão
Se o auricular escorregar e não conseguir retirá-lo, envolva-o num pano
macio e seco.
Para colocar um auricular (ver fig. -)
Introduza as peças do interior do auricular nos auscultadores até a parte
saliente dos auscultadores ficar totalmente tapada.
Limpar os auriculares
Retire os auriculares dos auscultadores e lave-os com uma solução de
detergente suave.
Especificações
Tipo: Fechado, dinâmico / Unidade accionadora: 9 mm, tipo campânula
(CCAW) / Capacidade de admissão de potência: 100 mW (IEC*) /
Impedância: 16 Ω a 1 kHz / Sensibilidade: 100 dB/Mw / Resposta em
frequência: 6 – 23.000 Hz / Cabo: 1,2 m, cabo litz OFC de colocação ao
pescoço / Peso: Aprox. 3 g / Ficha: Minificha estéreo em L dourada /
Acessórios fornecidos: Auriculares (S × 2, M × 2, L × 2), Caixa de transporte
(1), Regulador de cabo (1), Manual de Instruções (1)
* IEC = Comissão Electrotécnica Internacional
O design e as especificações estão sujeitos a alterações sem aviso prévio.
Precauções
Mantenha os auscultadores sempre limpos, especialmente o interior dos
auriculares de borracha. (ver fig.
)
Se houver pó ou cerume no interior do auricular, pode ter dificuldades em
ouvir.
Ouvir com o volume dos auscultadores muito alto pode afectar a sua audição.
Para uma maior segurança rodoviária, não utilize os auscultadores enquanto
conduz ou quando andar de bicicleta.
Não coloque peso ou exerça pressão sobre os auscultadores, pois pode
deformá-los durante um armazenamento prolongado.
Os auriculares podem deteriorar-se devido a um armazenamento ou
utilização prolongados.
Instale os auriculares firmemente nos auscultadores. Se um auricular
se soltar
acidentalmente e ficar no seu ouvido, pode causar ferimentos.
Nota sobre electricidade estática
Em condições de ar particularmente seco, pode sentir uma ligeira comichão
nos ouvidos. É resultado da electricidade estática acumulada no corpo e não é
uma avaria dos auscultadores.
O efeito pode ser minimizado se usar vestuário feito de materiais naturais.
Os EP-EX10A estão disponíveis (vendidos separadamente) como
auriculares sobresselentes opcionais.
Os EP-EX10A oferecem 4 tipos de auriculares: SS, S, M e L.
Tratamento de Equipamentos Eléctricos e Electrónicos
no final da sua vida útil (Aplicável na União Europeia e
em países Europeus com sistemas de recolha selectiva
de resíduos)
Este símbolo, colocado no produto ou na sua embalagem,
indica que este não deve ser tratado como resíduo urbano
indiferenciado. Deve sim ser colocado num ponto de recolha
destinado a resíduos de equipamentos eléctricos e electrónicos.
Assegurando-se que este produto é correctamente depositado, irá prevenir
potenciais consequências negativas para o ambiente bem como para a saúde,
que de outra forma poderiam ocorrer pelo mau manuseamento destes
produtos. A reciclagem dos materiais contribuirá para a conservação dos
recursos naturais. Para obter informação mais detalhada sobre a reciclagem
deste produto, por favor contacte o município onde reside, os serviços de
recolha de resíduos da sua área ou a loja onde adquiriu o produto.
Nota para os clientes: as seguintes informações aplicam-se apenas
ao equipamento comercializado nos países que aplicam as
Directivas da UE
O fabricante deste produto é a Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japão. O representante autorizado para Compatibilidade
Electromagnética e segurança do produto é a Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Alemanha. Para qualquer assunto
relacionado com serviço ou garantia por favor consulte a morada indicada
nos documentos sobre serviço e garantias que se encontram junto ao produto.
Polski
Słuchawki stereofoniczne
Cechy produktu
Wąska obudowa zapewnia komfortowe noszenie
Wysokiej mocy magnesy neodymowe (400 kJ/m
3
) zapewniają doskonałą
reprodukcję tonów wysokich, średnich oraz bardzo mocne tony niskie
Wygięte wkładki douszne zapewniają komfort i stabilność podczas noszenia
Wygodny regulator przewodu (wchodzi w skład zestawu)
Hybrydowe wkładki douszne silikonowo – gumowe (S, M, L) (wchodzą w
skład zestawu) — bezpieczne noszenie i długotrwała wygoda (patrz rys.
)
Poręczny futerał (wchodzi w skład zestawu)
Użytkowanie
Noszenie słuchawek (patrz rys. )
1
Znajdź prawą i lewą słuchawkę, a następnie złap w sposób
pokazany na rysunku.
2
Włóż dokładnie słuchawki do uszu w sposób pokazany na
rysunku.
3
Ustaw wkładki douszne tak, aby gładko weszły do ucha.
Jak używać regulatora przewodu (wchodzącego w skład
zestawu) (patrz rys. )
Długość przewodu można regulować, nawijając przewód na regulator.
(Na regulator można nawinąć maks. 50 cm przewodu. Nadmiar przewodu
łatwo spada z regulatora.)
1
Nawiń przewód.
2
Wciśnij przewód do otworu tak, aby się nie ruszał.
Uwaga
Nie należy nawijać wtyku ani rozgałęzienia przewodu, ponieważ powoduje
to naprężenie przewodu i może spowodować jego przerwanie.
Poprawne zakładanie wkładek dousznych (patrz rys. )
Jeśli wkładki douszne nie są poprawnie włożone do uszu, mogą nie być
słyszane tony niskie. Aby uzyskać lepszą jakość odsłuchu, należy wybrać
wkładki douszne w innym rozmiarze lub zmienić ich ustawienie tak, aby
można je było dobrze wkładać i komfortowo nosić.
Jeśli wkładki douszne nie pasują do uszu, należy użyć wkładek o innym
rozmiarze. Każdy rozmiar jest oznaczony odpowiednim kolorem na
wewnętrznej części wkładek (patrz rys.
-
).
Wymieniane wkładki douszne należy obrócić, aby założyć je w sposób pewny
na słuchawkach i uniemożliwić zsunięcie wkładki i pozostanie jej w uchu.
Rozmiary wkładek dousznych (kolor wewnętrzny)
Małe
Duże
SS*
(Czerwony)
S
(Pomarańczowy)
M
(Zielony)
L
(Jasnoniebieski)
* Ten rozmiar jest opcjonalny i trzeba go zakupić oddzielnie.
Zdejmowanie wkładki dousznej (patrz rys. -)
Złap słuchawkę, obróć wkładkę i ją wyciągnij.
Wskazówka
Jeśli wkładka douszna ślizga się i nie można jej wyjąć, należy ją owinąć
suchym, miękkim materiałem.
Zakładanie wkładki dousznej (patrz rys. -)
Wciśnij elementy znajdujące się we wkładce do słuchawki tak, aby słuchawka
była całkowicie zakryta.
Czyszczenie wkładek dousznych
Należy zdjąć wkładki douszne ze słuchawek i umyć je roztworem łagodnego
detergentu.
Dane techniczne
Typ: zamknięte, dynamiczne / Jednostka głośnikowa: 9 mm, typ kopułowy
(uzwojenie z drutu aluminiowego platerowanego miedzią) / Moc
maksymalna: 100 mW (IEC*) / Impedancja: 16 Ω przy częstotliwości 1 kHz /
Czułość: 100 dB/mW / Pasmo przenoszenia: 6 – 23 000 Hz / Przewód: 1,2 m,
typu lica OFC, do noszenia na szyi / Waga: ok. 3 g / Wtyk: pozłacany
miniwtyk stereofoniczny w kształcie litery L / Dostarczone wyposażenie:
Wkładki douszne (S × 2, M × 2, L × 2), Futerał (1), Regulator przewodu (1),
Instrukcja obsługi (1)
* IEC = International Electrotechnical Commission
Wygląd i dane techniczne mogą ulec zmianie bez uprzedzenia.
Środki ostrożności
Słuchawki powinny być zawsze czyste. Dotyczy to zwłaszcza wnętrza
gumowej wkładki dousznej (patrz rys.
).
Jeśli wewnątrz wkładki dousznej znajdują się kurz i woskowina, mogą
wystąpić problemy z odsłuchem.
Słuchanie przez słuchawki muzyki o wysokim poziomie głośności może mieć
szkodliwy wpływ na słuch. Ze względu na bezpieczeństwo ruchu drogowego,
nie wolno używać słuchawek podczas jazdy pojazdami lub rowerem.
Nie wolno pozostawić słuchawek pod naciskiem lub ciężarem przez dłuższy
czas, gdyż może to doprowadzić do ich odkształcenia.
Wkładki douszne mogą niszczyć się w wyniku długotrwałego
przechowywania lub użytkowania.
Wkładki douszne należy mocno założyć na słuchawki. Jeśli wkładka douszna
przypadkowo zsunie się i pozostanie w uchu, może to być przyczyną obrażeń.
Uwagi dotyczące elektryczności statycznej
Przy bardzo niskiej wilgotności powietrza może wystąpić uczucie mrowienia
w uszach. Jest to spowodowane nagromadzeniem się ładunków statycznych
na ciele. Nie jest to oznaka uszkodzenia słuchawek.
Efekt ten można zminimalizować poprzez noszenie odzieży z naturalnych
włókien.
Dostępne są opcjonalne, wymienne wkładki słuchawek EP-EX10A
(sprzedawane oddzielnie).
Zestaw EP-EX10A zawiera wkładki w 4 rozmiarach: SS, S, M i L.
Pozbycie się zużytego sprzętu (stosowane w krajach Unii
Europejskiej i w pozostałych krajach europejskich
stosujących własne systemy zbiórki)
Ten symbol na produkcie lub jego opakowaniu oznacza, że
produkt nie może być traktowany jako odpad komunalny, lecz
powinno się go dostarczyć do odpowiedniego punktu zbiórki
sprzętu elektrycznego i elektronicznego w celu recyklingu.
Odpowiednie zadysponowanie zużytego produktu zapobiega
potencjalnym negatywnym wpływom na środowisko oraz zdrowie ludzi, jakie
mogłyby wystąpić w przypadku niewłaściwego zagospodarowania odpadów.
Recykling materiałów pomoże w ochronie środowiska naturalnego. W celu
uzyskania bardziej szczegółowych informacji na temat recyklingu tego
produktu, należy skontaktować się z lokalną jednostką samorządu
terytorialnego, ze służbami zagospodarowywania odpadów lub ze sklepem, w
którym zakupiony został ten produkt.
Informacje dla klientów: poniższe informacje dotyczą wyłącznie
urządzeń sprzedawanych w krajach, w których obowiązują
dyrektywy Unii Europejskiej
Producentem tego produktu jest Sony Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japonia. Upoważnionym przedstawicielem producenta w
Unii Europejskiej, uprawnionym do dokonywania i potwierdzania oceny
zgodności z wymaganiami zasadniczymi, jest Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Niemcy. Nadzór nad dystrybucją na
terytorium Rzeczypospolitej Polskiej sprawuje Sony Poland, 00-876
Warszawa, ul. Ogrodowa 58. W sprawach serwisowych i gwarancyjnych
należy kontaktować się z podmiotami, których adresy podano w osobnych
dokumentach gwarancyjnych lub serwisowych, lub z najbliższym sprzedawcą
produktów Sony.
Magyar
Sztereo fejhallgató
Jellemzők
Kényelmesen illeszkedő vékony tokozás
Nagy felbontású magas és közepes frekvenciájú hangok, valamint erőteljes
basszus a nagy, 400 kJ/m
3
teljesítményű neodímium mágnesekkel
Stabilan és kényelmesen viselhető hajlított füldugók
Kényelmes kábelhossz-beállító mellékelve
Jól illeszkedő és hosszú ideig kényelmesen viselhető hibrid szilikongumi
füldugók (S, M, L) mellékelve (lásd
ábra)
Kézreálló hordtasak mellékelve
Használat
A fülhallgató használata (lásd ábra)
1
Keresse meg a jobb és bal fülhallgatót és fogja meg őket az
ábrának megfelelően.
2
Az ábra szerint biztonságosan illessze a fülébe a fülhallgatókat.
3
Állítsa be úgy a füldugókat, hogy kényelmesen illeszkedjenek a
fülébe.
A mellékelt kábelhossz-beállító használata (lásd ábra)
A kábel hosszát a kábelhossz-beállítóra felcsévélve lehet beállítani.
(A kábelhossz-beállítóra legfeljebb 50 cm kábelt lehet feltekercselni. Ha ennél
többet tekercsel fel, a kábel könnyen letekeredhet a kábelhossz-beállítóról.)
1
Tekercselje fel a kábelt.
2
A hasítékba nyomva rögzítse a kábelt.
Megjegyzés
Ne tekercselje fel a csatlakozódugaszt vagy a kábel hasított részét, mert a
kábel megfeszülhet és elszakadhat.
A füldugók helyes felhelyezése (lásd ábra)
Ha a füldugók nem pontosan illeszkednek a fülbe, akkor előfordulhat, hogy a
mély hangokat nem lehet hallani. A jobb hangminőség érdekében használjon
más méretű füldugókat, vagy igazítsa őket a fülébe úgy, hogy viseletük
kényelmes legyen és teljesen kitöltsék a fülét.
Ha a füldugók nem illeszkednek a fülébe, próbálkozzon más mérettel. A
füldugó méretét a belsejében található színkód jelzi (lásd
-
ábra).
A füldugók cseréjekor a megfelelő felszereléshez fordítsa el őket a fülhallgatón,
megakadályozva, hogy a füldugó kiessen és a fülében maradjon.
Füldugó-méretek (belső szín)
Kicsi
Nagy
SS*
(piros)
S
(
narancssárga
)
M
(zöld)
L
(világoskék)
* Ez a méret opcionális és a vásárláskor külön kell kérni.
A füldugó levétele (lásd - ábra)
A fülhallgatót megfogva csavarja meg és húzza le a füldugót.
Tanács
Ha a füldugó csúszik és nem lehet levenni, burkolja be száraz, puha
kendővel.
A füldugó felhelyezése (lásd - ábra)
A füldugó belső részét nyomja addig a fülhallgatóba, hogy a dugó teljesen
befedje a fülhallgató kiálló részét.
A füldugók tisztítása
A füldugókat vegye le a fülhallgatóról és enyhe mosogatószerrel mossa meg
őket.
Műszaki adatok
Típus: Zárt, dinamikus / Hangszórók: 9 mm, kúpos típus (CCAW) /
Teljesítmény: 100 mW (IEC*) / Impedancia: 16 Ω, 1 kHz-en / Érzékenység:
100 dB/mW / Frekvenciaátvitel: 6 – 23 000 Hz / Kábel: 1,2 m, OFC litze
nyaklánc / Tömeg: kb. 3 g / Csatlakozó: Aranyozott L-alakú mini sztereo
csatlakozó / Mellékelt tartozékok: Füldugók (S × 2 , M × 2, L × 2),
Hordozótasak (1), Kábelhossz-beáltó (1),
Használati útmutató (1)
* IEC = International Electrotechnical Commission
A kialakítás és a műszaki adatok előzetes értesítés nélkül megváltoztathatók.
Óvintézkedések
Kérjük, a fülhallgatót, különösen a gumi füldugó belsejét mindig tartsa tisztán
(lásd
ábra).
Ha a füldugóba por vagy fülzsír kerül, a hangminőség romlik.
A fülhallgatót nagy hangerővel használva halláskárosodást szenvedhet.
Forgalombiztonsági okokból járművezetés vagy kerékpározás közben ne
használja a fülhallgatót.
A fülhallgatókra ne helyezzen súlyt és ne gyakoroljon nyomást, mert hosszú
tárolás esetén a fülhallgatók deformálódhatnak.
Hosszú idejű tárolás vagy használat után a füldugók minősége romolhat.
A füldugókat szilárdan rögzítse a fülhallgatóra. Ha a füldugó
véletlenül
leválik és a fülében marad, sérülést okozhat.
Megjegyzés a statikus elektromosságról
Elsősorban száraz levegőben előfordulhat, hogy enyhe bizsergést érez a
fülében. Ez a testen felhalmozódott sztatikus elektromos töltés és nem a
fülhallgató hibás működésének eredménye.
Ez a hatás természetes anyagokból készült ruházat viselésével csökkenthető.
Az EP-EX10A (külön megvásárolható) opcionális csere-füldugóként
kapható.
Az EP-EX10A fülhallgatóval 4-féle füldugó használható: SS, S, M és L.
Feleslegessé vált elektromos és elektronikus készülékek
hulladékként való eltávolítása (Használható az Európai
Unió és egyéb európai országok szelektív
hulladékgyűjtési rendszereiben)
Ez a szimbólum a készüléken vagy a csomagolásán azt jelzi,
hogy a terméket ne kezelje háztartási hulladékként. Kérjük,
hogy az elektromos és elektronikai hulladék gyűjtésére kijelölt
gyűjtőhelyen adja le. A feleslegessé vált termékének helyes
kezelésével segít megelőzni a környezet és az emberi egészség károsodását,
mely bekövetkezhetne, ha nem követi a hulladék kezelés helyes módját. Az
anyagok, újrahasznosítása segít a természeti erőforrások megőrzésében. A
termék újrahasznosítása érdekében további információért forduljon a
lakhelyén az illetékesekhez, a helyi hulladékgyűjtő szolgáltatóhoz vagy ahhoz
az üzlethez, ahol a terméket megvásárolta.
Megjegyzés a vásárlóknak: az alábbi információ csak az Európai
Unió irányelveit alkalmazó országokban eladott berendezésekre
vonatkozik
Ezt a terméket a Sony Corporation (108-0075 Japán, Tokió, 1-7-1 Konan,
Minato-ku) gyártotta. A termékbiztonsággal és az EMC irányelvekkel
kapcsolatban a Sony Deutschland GmbH (Németország, 70327 Stuttgart,
Hedelfinger Strasse 61.) a jogosult képviselő. Kérjük, bármely szervizeléssel
vagy garanciával kapcsolatos ügyben, a különálló szerviz- vagy
garanciadokumentumokban megadott címekhez forduljon.
Stereo
Headphones
MDR-EX57LP
©2010 Sony Corporation Printed in Thailand
4-152-336-21(1)
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
Istruzioni per l’uso
Gebruiksaanwijzing
Manual de Instruções
Instrukcja obsługi
Használati útmutató
Návod k obsluze
Návod na používanie
Инструкция по эксплуатации
Інструкція з експлуатації
δηγίες λειτυργίας
Инструкции за работа
Instrucţiuni de utilizare
Navodila za uporabo
English
Stereo headphones
Features
Slim housing for a comfortable fit
400kJ/m
3
high power neodymium magnets produce high-resolution treble
and midrange with powerful bass
Angled earbud structure for stable and comfortable wearing
Convenient cord adjuster supplied
Hybrid silicone rubber earbuds (S, M, L) supplied for secure fitting and long-
term wearing comfort (see fig.
)
Handy carrying pouch supplied
How to use
Wearing the headphones (see fig. )
1
Determine right and left headphone and hold them as in the
illustration.
2
Fit the headphones into your ears snugly, as in the illustration.
3
Adjust the earbud to fit snugly in your ear.
How to use the supplied cord adjuster (see fig. )
You can adjust the cord length by winding the cord on the cord adjuster.
(The cord can be wound to the cord adjuster up to 50 cm. If you wind more,
the cord comes off from the cord adjuster easily.)
1
Wind the cord.
2
Push cord into slot hole to secure in place.
Note
Do not wind the plug or split section of the cord, as it will strain the cord
and may cause a wire break.
How to install the earbuds correctly (see fig. )
If the earbuds do not fit your ears correctly, low-bass sound may not be heard.
To enjoy better sound quality, change the earbuds to another size, or adjust
the earbuds position to sit on your ears comfortably and fit your ears snugly.
Cross-section of earbud
Coupe de l’oreillette
Querschnitt des Ohrpolsters
Sección transversal de una almohadilla
Sezione trasversale dell’auricolare
Dwarsdoorsnede van een oordopje
Secção cruzada do auricular
Przekrój poprzeczny wkładki dousznej
A füldugó keresztmetszete
Low-density silicone
Silicone à faible densité
Silikon mit niedriger Dichte
Silicona de baja densidad
Silicone a bassa densità
Silicone met lage dichtheid
Silicone de baixa densidade
Miękki silikon
Kis sűrűségű szilikon
High- density silicone
Silicone à haute densité
Silikon mit hoher Dichte
Silicona de alta densidad
Silicone ad alta densità
Silicone met hoge dichtheid
Silicone de alta densidade
Twardy silikon
Nagy sűrűségű szilikon
2
3
1
RL
Earbud
Oreillette
Ohrpolster
Almohadilla
Auricolare
Oordopje
Auricular
Wkładka douszna
Füldugó
1
2
Sectional View
Vue en coupe
Schnittansicht
Vista del alzado de la sección
Vista in sezione
Dwarsdoorsnede
Vista Seccional
Przekrój poprzeczny
Keresztmetszeti nézet
Coloured parts
Parties colorées
Farbige Teile
Partes coloreadas
Componenti colorati
Gekleurde delen
Partes coloridas
Kolorowe części
Színes részek
1 / 1

Sony MDR-EX57LP Manuale del proprietario

Categoria
Cuffie
Tipo
Manuale del proprietario