ESAB LAF 1000 ES Manuale utente

ESAB
Marca
ESAB
Modello
LAF 1000 ES
Categoria
Sistema di saldatura
Tipo
Manuale utente
Valid for serial no. 0040449 056 001 2003--06--25
LAF 1000 ES
101103105107109111102021110025108024042106023061104022041100020040060001
Bruksanvisning
Brugsanvisning
Bruksanvisning
Käyttöohjeet
Instruction manual
Betriebsanweisung
Manuel d’instructions
Gebruiksaanwijzing
Instrucciones de uso
Istruzioni per l’uso
Manual de instruções
Ïäçãßåò ÷ñÞóåùò
-- 2 --
Rätt till ändring av specifikationer utan avisering förbehålles.
Ret til ændring af specifikationer uden varsel forbeholdes.
Rett til å endre spesifikasjoner uten varsel forbeholdes.
Oikeudet muutoksiin pidätetään.
Rights reserved to alter specifications without notice.
Änderungen vorbehalten.
Sous réserve de modifications sans avis préalable.
Recht op wijzigingen zonder voorafgaande mededeling voorbehouden.
Reservado el derecho de cambiar las especificaciones sin previo aviso.
Ci riserviamo il diritto di variare le specifiche senza preavviso.
Reservamo--nos o direito de alterar as especificações sem aviso prévio.
Äéáôçñåßôáé ôï äéêáßùìá ôñïðïðïßçóçò ðñïäéáãñáöþí ×ùñßò ðñïåéäïðïßçóç.
SVENSKA 5..............................................
DANSK 13................................................
NORSK 21................................................
SUOMI 29................................................
ENGLISH 37..............................................
DEUTSCH 45.............................................
FRANÇAIS 53.............................................
NEDERLANDS 61.........................................
ESPAÑOL 69..............................................
ITALIANO 78..............................................
PORTUGUÊS 87..........................................
ÅËËÇÍÉÊÁ 95.............................................
3
FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
Esab Welding Equipment AB, 695 81 Laxå, Sverige, försäkrar under eget ansvar att
svetsströmkälla LAF 1000 ES från serienummer 004 är i överensstämmelse med
standard EN 60974--1 enligt villkoren i direktiv (73/23/EEG) m ed tillägg (93/68/EEG)
och standard EN 50199 enligt villkoren i direktiv ( 89/336/EEG) med tillägg
(93/68/EEG).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
OVERENSSTEMMELSEERKLÆRING
Esab Welding Equipment AB, S--695 81 Laxå, Sverige, erklærer på eget ansvar, at
svejsestrømkilde LAF 1000 ES fra serienummer 004 er i overensstemmelse med
standarden EN 60974--1 ifølge betingelser n e i direktiv (73/23/EØF) med tillæg
(93/68/EØF) og standarden EN 50199 ifølge betingelserne i direktiv (89/336/EØF)
med tillæg (93/68/EØF).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
FORSIKRING OM SAMSVAR
Esab Welding Equipment AB, S--695 81 Laxå, Sverige, forsikrer på eget ansvar at
sveisestrømkilde LAF 1000 ES fra serienummer 004 er i overensstemmelse med
standard EN 60974--1 i følge vilkårene i direktiv ( 73/23/EF) med tillegg (93/68/EF) og
standard EN 50199 i følge vilkår ene i direktiv (89/336/EF) med tillegg (93/68/EF) .
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
VAATIMUSTENMUKAISUUSVAKUUTUS
Esab Welding Equipment AB, S--695 81 Laxå, Ruotsi, vakuuttaa omalla vastuullaan,
että hitsausvirtalähde LAF 1000 ES alkaen sarjanumerosta 004 täyttää standardin
EN 60974--1 vaatimukset direktiivin (73/23/ETY) ja sen lisäysten (93/68/ETY) ehto-
jen mukaisesti sekä standardin EN 50199 vaatimukset d irektiivin (89/336/ETY) ja
sen lisäysten (93/68/ETY) ehtojen mukaisesti.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
DECLARATI ON OF CONFORMITY
Esab Welding Equipment AB, S--695 81 Laxå, Sweden, gives its unreserved guaran-
tee that welding power source LAF 1000 ES from serial number 004 complies with
standard EN 60974--1, in accordance with the requirements of directive (73/23/EEC)
and addendum (93/68/EEC) and with standard EN 50199 in accordance with the re-
quirements of directive (89/336/EEC) and addendum (93/68/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
ZULASSUNGSNACHWEIS
Esab Welding Equipment AB, S--695 81 Laxå, Schweden, bestätigt hiermit in Eigen-
verantwortung, daß die Schweißstromquelle LAF 1000 ES ab Seriennummer 004
dem Standard EN 60974--1 gemäß den Bedingungen der Direktive ( 73/23/EEG) mit
Zusats (93/68/EEG) und dem Standard EN 50199 gemäß den Bedingungen der Di -
rektive ( 89/336/EEG) mit Zusatz (93/68/EEG) entspricht.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
CERTIFICAT DE CONFORMITÉ
Esab Welding Equipment AB, S--695 81 Laxå Suède, certifie que la source de cou-
rant de soudage LAF 1000 ES à partir du numéro de série 004 est conforme à la
norme EN 60974--1 selon les cinditions de la directive ( 73/23/CEE) avec additif
(93/68/CEE) et à la norme EN 50199 selon les conditions de la directive
(89/336/CEE) avec additif (93/68/CEE).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
4
VERKLARING VAN OVEREENSTEMMING
Esab Welding Equipment AB, S--695 81 Laxå, Zweden, verklaart geheel onder eigen
verantwoordelijkheid dat lasstr oombron LAF 1000 ES van het serienumm e r 004 in
overeenstemming is met norm EN 60974--1 conform de bepalingen in richtlijn
(73/23/EEG) m et de annex (93/68/EEG) en met norm EN 50199 conform de bespa-
lingen in richtlijn (89/336/EEG) met annex (93/68/EEG).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
DECLARACIÓN DE CONFORMIDAD
Esab Welding Equipment AB, S--695 81 Laxå, Suecia, garantiza bajo propia respon-
sabilidad que la fuente de corriente para soldadura LAF 1000 ES a partir del número
de serie 004 concuerda con la norma EN 60974--1 conforme a la directiva
(73/23/CEE) con el suplemento (93/68/CEE) y con la norma EN 50199 según los
requisitos de la directiva (89/336/CEE) con el suplemento (93/68/CEE).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
DICHIARAZIONE DI CONFORMITA
Esab Welding Equipment AB, S--695 81 Laxå, Svezia, dichiara sotto la propria re-
sponsabilità che il generatore per saldatura L AF 1000 ES con numer o di serie a par-
tire da 004 è conforme alla norma EN 60974--1 come previsto dalla direttiva
(73/23/CEE) e successive integrazioni (93/68/CEE) ed alla norma EN 50199 come
previsto dalla direttiva (89/336/CEE) e successive integrazioni (93/68/CEE).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
DECLARAÇÃO DE CONFORMIDADE
Esab Welding Equipment AB, S--695 81 Laxå, Suécia, garante sob r e sponsabilidade
de própria que a fonte de corrente para soldadura LAF 1000 ES a partir do número
de série 004 está em conformidade com a norma EN 60974--1 segundo os requisi-
tos da directiva (73/23/CEE) com o suplemento ( 93/68/CEE) e com a norma EN
50199 segundo os requisitos da directiva (89/336/CEE) com o suplemento
(93/68/CEE).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
ÄÇËÙÓÇ ÓÕÌÌÏÑÖÙÓÇÓ
ÇåôáéñåßáEsab Welding Equipment AB, 695 81 Laxå, Óïõçäßá, äçëþíåé üôé ïé
ðçãÝò ñåýìáôïò óõãêüëëçóçò LAF 1000 ES áðü ôïí áñéèìü óåéñÜò 004 êáé
Ýðåéôá, óõììïñöþíïíôáé ìå ôï ðñüôõðï EN 60974–1 óýìöùíá ìå ôéò
áðáéôÞóåéò ôçò ïäçãßáò (73/23/EEG) êáé ôïõ ðáñáñôÞìáôïò (93/68/EEG) êáé ôï
ðñüôõðï EN 50199 óýìöùíá ìå ôéò áðáéôÞóåéò ôçò ïäçãßáò (89/336/EEG) êáé
ôïõ ðáñáñôÞìáôïò (93/68/EEG).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Martin Andersson
Manager Control Systems & Software
Automation Products
ESAB AB, Welding Automation
695 81 LAXÅ
SWEDEN Tel: + 46 584 81000 Fax: + 46 584 411721
Laxå 2003--06--24
ENGLISH
-- 3 7 --
TOCe
1SAFETY 38...........................................................
2 INTRODUCTION 40...................................................
2.1 General 40..................................................................
2.2 Technical data 40............................................................
3 INSTALLATION 41....................................................
3.1 General 41..................................................................
3.2 Unpacking and erection 41....................................................
3.3 Connections 41..............................................................
3.4 PC board 42.................................................................
4 OPERATION 43.......................................................
4.1 Controls 43..................................................................
4.2 Start--up 43..................................................................
5 MAINTENANCE 44....................................................
5.1 General 44..................................................................
5.2 Cleaning 44.................................................................
6 ORDERING OF SPARE PARTS 44......................................
DIAGRAM 104............................................................
LIST OF COMPONENTS 105...............................................
CONNECTION INSTRUCTION 106..........................................
SPARE PARTS LIST 107...................................................
-- 3 8 --
SafE
1SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorised person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from draughts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 3 9 --
SafE
WARNING
READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING.
ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU-
TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER’S SAFETY PRACTICES WHICH SHOULD BE
BASED ON MANUFACTURERS’ HAZARD DATA.
ELECTRIC SHOCK -- Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is safe.
FUMES AND GASES -- Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS -- Can injure eyes and burn skin.
S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with s uitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE -- Excessive noise can damage hearing
S Protect your ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION -- Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
WARNING
This product is intended for industrial use. In a domestic environment this
product may cause radio interference. It is the user’s responsibility to take
adequate precautions.
GB
-- 4 0 --
fja1d1ea
2 INTRODUCTION
2.1 General
LAF 1000 ES is a r emote--controlled 3--phase welding power source designed for
high--efficiency mechanical gas metal arc welding (MIG/MAG) or sub arc welding
(SAW). It is always to be used in combination with ESAB‘s control box
A2--A6 Process Controller (PEH).
LAF is fan--cooled and monitored by a thermal overload protection.
When the protection enters into action a yellow indicating lamp on the front panel
goes on and is reset automatically as soon as the temperature has gone down to an
acceptable level.
The welding power source and the control unit are linked together over a 2--wire bus
enabling precision control of the welding process.
All welding parameter settings for the power source can be made by the operator on
the front panel of the control unit.
The operation of the power source is completely controlled and monitored by this
unit. Even the start and stop qualities can be set by way of the control unit. The
preset welding current parameters can also be monitored in the course of welding.
For more detailed information regarding the settings and the working mode of the
welding power source, please r efer to the A2--A6 Process Controller (PEH)
instruction m anual.
2.2 Technical data
LAF 1000 ES
Voltage 400/415/500 V, 3µ50 Hz
440/550 V, 3µ60 Hz
Permissible load at:
100 % duty cycle 1000 A
Setting range 200 A / 33 V -- 1000 A /60 V
No--load voltage 68 V
No--load power 220 W
Effiency 0,86
Power factor 0,92
Weight 520 kg
Dimensions L x W x H 774 x 598 x 1430
Class of enclosure IP 23
Class of application
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP 23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
GB
1
2
3
4
-- 4 1 --
fja1i1ea
3 INSTALLATION
3.1 General
The in stallatio n must be executed by a professional.
3.2 Unpacking and erection
WARNING -- TIPPING RISK!
Fasten the equipment -- particularly if the ground is uneven or sloping.
S Place the welding power source on a level foundation.
S Make sure there is nothing to prevent the cooling.
Lifting instructions
3.3 Connections
S On delivery the welding power source is
connected for 400 V. For other supply voltage,
switch over to the desired voltage on the main
transformer and the control transformer according
to the connection instructions on page 106.
S Make sure the mains cable has the right
sectional area and fuse it with an adequate
fuse according to applicable local directions
(see table on page 42).
S Connect the earth cable to the screw marked .
S Tighten the cable support (1).
S Connect the mains cable to the main terminal
blocks L1, L2 and L3.
S Connect the control cable between the L AF
welding power source and the control unit to the
12--pole contact (2) inside the welding power
source.
S Connect 1 pin socket measure cable (4).
S Connect a suitable welding and return cable to the contacts (3) marked + and --
on the front of the power source.
GB
-- 4 2 --
fja1i1ea
Mains co n nection
LAF 1000 ES 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz
Voltage (V) 400 415 500 440 550
Current (A) 105 105 84 105 84
Cablearea(mm
2
) 3x50/ 25 3x50/ 25 3x50/ 16 3 x50/ 25 3 x35/16
Fuse, slow (A) 125 125 100 125 100
3.4 PC board
DIP switch es
The PC board (AP1) has two DIP switches (SW1 and SW2) which are preset on
delivery. The settings are not to be changed.
When spare parts are supplied the settings of the DIP switches must be checked
(and set, if necessary) before fitting the PC board into the welding power source.
S DIP switch SW1
To make the communication with the
A2--A6 Process Controller (PEH) work
DIP switch 1 (SW1) must be set.
S DIP switch SW2
DIP switch 2 (SW2) must be set in order to
inform the A2--A6 process controller (PEH)
about the rating of the power source that
is connected.
Setting of DIP switch SW1
S Set pole 6 to “OFF“ position and
all other poles to “ON“.
Setting of DIP switch SW2
S Set pole 2 and 3 to “OF F ” position
and all other poles to “ON”.
Welding power source program
The welding power source program is
stored in the flash memory IC 6.
The capsule is fitted in a holder and is replaceable.
GB
-- 4 3 --
fja1o1ea
4 OPERATION
4.1 Controls
The front panel contains:
1. Main switch, breaking the incoming mains voltage for the welding power source.
2. Indicating lamp (white), showing that the main switch is activated.
3. Indicating lamp (yellow), showing that the thermal protection has entered into
action due to overheating in the transformer. The lamp is reset when the
temperature has gone down to an acceptable level.
4. Pushbutton, for the resetting of automatic fuse FU2 for 42 V supply voltage.
5. Emergency pushbutton. When the button is activated the main contactor in the
power source trips and the supply voltage for the control box is broken. (The
emergency button on the control unit has the same function).
4.2 Start--up
S Connect the return cable to the work piece.
S Set the main switch (1) to position “I“.
The white indicating lamp (2) goes on and the fan starts.
S Set the welding parameters and start welding by way of the control box
(see the A2--A6 Process Controller 0443 745 XXX instruction manual).
GB
-- 4 4 --
fja1m1ea
5 MAINTENANCE
5.1 General
Note:
All warranty undertakings given by the supplier cease to apply if the customer
attempts to rectify any faults on the machine during the warranty period.
5.2 Cleaning
S Clean the welding power source as necessary.
Dry compressed air is recommended for the purpose.
WARNING!
Blocked air inlets or outlets will lead to overheating.
6 ORDERING OF SPARE PARTS
Spare parts are ordered through your nearest ESAB representative, see back cover.
When ordering spare parts, please state machine type and number as well as desig-
nation and spare part number as shown in the spare parts list on page 107.
This will simplify dispatch and ensure you get the right part.
GB
ESAB AB
SE--695 81 L AXÅ
SWEDEN
Phone + 46 584 81 000
Fax + 46 584 123 08
www.esab.co m
030210
ESAB subsidiaries and representative offices
Europe
AUSTRIA
ESAB Ges.m.b.H
Vienna--Liesing
Tel: +43 1 888 25 11
Fax: +43 1 888 25 11 85
BELGIUM
S.A. ESAB N.V.
Brussels
Tel: +32 2 745 11 00
Fax: +32 2 726 80 05
THE CZECH REPUBLIC
ESAB V AMBERK s.r .o.
Prague
Tel: +420 2 819 40 885
Fax: +420 2 819 40 120
DENMARK
Aktieselskabet ESAB
Copenhagen-- Valby
Tel:+4536300111
Fax:+4536304003
FINLAND
ESAB Oy
Helsinki
Tel: +358 9 547 761
Fax: +358 9 547 77 71
FRANCE
ESAB France S.A.
Cergy Pontoise
Tel:+33130755500
Fax:+33130755524
GERMANY
ESAB GmbH
Solingen
Tel: +49 212 298 0
Fax: +49 212 298 204
GREAT BRITAIN
ESAB Group (UK) Ltd
Waltham Cross
Tel: +44 1992 76 85 15
Fax: +44 1992 71 58 03
ESAB Automation Ltd
Andover
Tel: +44 1264 33 22 33
Fax: +44 1264 33 20 74
HUNGARY
ESAB Kft
Budapest
Tel:+3612044182
Fax:+3612044186
ITALY
ESAB Saldatura S.p.A.
Mesero (Mi)
Tel:+3902979681
Fax:+390297289181
THE NETHERLANDS
ESAB Nederland B.V.
Utrecht
Tel: +31 30 248 59 22
Fax: +31 30 248 52 60
NORWAY
AS ESAB
Larvik
Tel:+4733121000
Fax:+4733115203
POLAND
ESAB Sp.z.o.o
Warszaw
Tel: +48 22 813 99 63
Fax: +48 22 813 98 81
PORTUGAL
ESAB Lda
Lisbon
Tel: +351 1 837 1527
Fax: +351 1 859 1277
SLOVAKIA
ESAB Slovakia s.r.o.
Bratislava
Tel:+421744882426
Fax:+421744888741
SPAIN
ESAB Ibérica S.A.
Alcobendas (Madrid)
Tel: +34 91 623 11 00
Fax: +34 91 661 51 83
SWEDEN
ESAB Sverige AB
Gothenburg
Tel:+4631509500
Fax:+4631509222
ESAB International AB
Gothenburg
Tel:+4631509000
Fax:+4631509360
SWITZERLAND
ESAB AG
Dietikon
Tel: +41 1 741 25 25
Fax: +41 1 740 30 55
North and South America
ARGENTINA
CONARCO
Buenos Aires
Tel: +54 11 4 753 4039
Fax: +54 11 4 753 6313
BRAZIL
ESAB S.A.
Contagem-- MG
Tel: +55 31 333 43 33
Fax: +55 31 361 31 51
CANADA
ESAB Group Canada Inc.
Missisauga, Ontario
Tel: +1 905 670 02 20
Fax: +1 905 670 48 79
MEXICO
ESAB Mexico S.A.
Monterrey
Tel: +52 8 350 5959
Fax: +52 8 350 7554
USA
ESAB Welding & Cutting Products
Florence, SC
Tel: +1 843 669 44 11
Fax: +1 843 664 44 58
Asia/Pacific
CHINA
Shanghai ESAB A/P
Shanghai
Tel: +86 21 6539 7124
Fax: +86 21 6543 6622
INDIA
ESAB India Ltd
Calcutta
Tel: +91 33 478 45 17
Fax: +91 33 468 18 80
INDONESIA
P.T. Esabindo Pratama
Jakarta
Tel: +62 21 460 01 88
Fax: +62 21 461 29 29
MALAYSIA
ESAB (Malaysia) Snd Bhd
Selangor
Tel: +60 3 703 36 15
Fax: +60 3 703 35 52
SINGAPORE
ESAB Singapore Pte Ltd
Singapore
Tel: +65 861 43 22
Fax: +65 861 31 95
ESAB Asia/Pacific Pte Ltd
Singapore
Tel: +65 861 74 42
Fax: +65 863 08 39
SOUTH KOREA
ESAB SeAH Corporation
Kyung --Nam
Tel: +82 551 289 81 11
Fax: +82 551 289 88 63
UNITED ARAB EMIRATES
ESAB Middle East
Dubai
Tel: +971 4 338 88 29
Fax: +971 4 338 87 29
Representative offices
BULGARIA
ESAB Representative Office
Sofia
Tel/Fax: +359 2 974 42 88
EGYPT
ESAB Egypt
Dokki--Cairo
Tel: +20 2 390 96 69
Fax: +20 2 393 32 13
ROMANIA
ESAB Representative Office
Bucharest
Tel/Fax: +40 1 322 36 74
RUSSIA--CIS
ESAB Representative Office
Moscow
Tel: +7 095 937 98 20
Fax: +7 095 937 95 80
ESAB Representative Office
St Petersburg
Tel: +7 812 325 43 62
Fax: +7 812 325 66 85
Distributors
For addresses and phone
numbers to our distributors in
other countries, please visit our
home page
www.esab.co m
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

ESAB LAF 1000 ES Manuale utente

ESAB
Marca
ESAB
Modello
LAF 1000 ES
Categoria
Sistema di saldatura
Tipo
Manuale utente
Scarica il pdf
rapporto

in altre lingue

Documenti correlati