Smeg UKC3170P1 Manuale utente

Marca: Smeg

Modello: UKC3170P1

Categoria: Frigo-congelatori

Tipo: Manuale utente

UKC3170P1

User Manual

Fridge

Freezer

Istruzioni per

l’uso

Frigo-Con‐

gelatore

CONTENTS

Safety information 2

Safety instructions 3

Operation 5

Daily use 5

Hints and tips 7

Care and cleaning 8

Troubleshooting 10

Installation 12

Technical data 14

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damages that are the result of

incorrect installation or usage. Always keep the instructions

in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

• Do not let children play with the appliance.

• Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

• Keep all packaging away from children and dispose of it

appropriately.

General Safety

• This appliance is intended to be used in household and

similar applications such as:

– Farm houses; staff kitchen areas in shops, offices and

other working environments

– By clients in hotels, motels, bed and breakfast and other

residential type environments

• Keep ventilation openings, in the appliance enclosure or in

the built-in structure, clear of obstruction.

• Do not use mechanical devices or other means to

accelerate the defrosting process, other than those

recommended by the manufacturer.

• Do not damage the refrigerant circuit.

• Do not use electrical appliances inside the food storage

compartments of the appliance, unless they are of the type

recommended by the manufacturer.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Only use

neutral detergents. Do not use abrasive products, abrasive

cleaning pads, solvents or metal objects.

• Do not store explosive substances such as aerosol cans

with a flammable propellant in this appliance.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

Installation

WARNING! Only a qualified

person must install this

appliance.

• Remove all the packaging and the

transit bolts.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Make sure the air can circulate around

the appliance.

• At first installation or after reversing the

door wait at least 4 hours before

connecting the appliance to the power

supply. This is to allow the oil to flow

back in the compressor.

• Before carrying out any operations on

the appliance (e.g. reversing the door),

remove the plug from the power socket.

• Do not install the appliance close to

radiators or cookers, ovens or hobs.

• Do not install the appliance where there

is direct sunlight.

• Do not install this appliance in areas

that are too humid or too cold, such as

the construction appendices, garages

or wine cellars.

• When you move the appliance, lift it by

the front edge to avoid scratching the

floor.

• The appliance contains a bag of

desiccant. This is not a toy. This is not

food. Please dispose of it immediately.

Electrical connection

WARNING! Risk of fire and

electric shock.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

electrical components (e.g. mains plug,

mains cable, compressor). Contact the

Authorised Service Centre or an

electrician to change the electrical

components.

• The mains cable must stay below the

level of the mains plug.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

Use

WARNING! Risk of injury,

burns, electric shock or fire.

• Do not change the specification of this

appliance.

• Do not put electrical appliances (e.g.

ice cream makers) in the appliance

unless they are stated applicable by the

manufacturer.

• Be careful not to cause damage to the

refrigerant circuit. It contains isobutane

(R600a), a natural gas with a high level

of environmental compatibility. This gas

is flammable.

• If damage occurs to the refrigerant

circuit, make sure that there are no

flames and sources of ignition in the

room. Ventilate the room.

• Do not let hot items to touch the plastic

parts of the appliance.

• Do not put soft drinks in the freezer

compartment. This will create pressure

on the drink container.

• Do not store flammable gas and liquid

in the appliance.

• Do not put flammable products or items

that are wet with flammable products

in, near or on the appliance.

• Do not touch the compressor or the

condenser. They are hot.

• Do not remove or touch items from the

freezer compartment if your hands are

wet or damp.

• Do not freeze again food that has been

thawed.

• Obey the storage instructions on the

packaging of frozen food.

Internal light

WARNING! Risk of electric

shock.

• The type of lamp used for this

appliance is for household appliances

only. Do not use it for house lighting.

Care and cleaning

WARNING! Risk of injury or

damage to the appliance.

• Before maintenance, deactivate the

appliance and disconnect the mains

plug from the mains socket.

• This appliance contains hydrocarbons

in the cooling unit. Only a qualified

person must do the maintenance and

the recharging of the unit.

• Regularly examine the drain of the

appliance and if necessary, clean it. If

the drain is blocked, defrosted water

collects in the bottom of the appliance.

Disposal

WARNING! Risk of injury or

suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door to prevent children

and pets to be closed inside of the

appliance.

• The refrigerant circuit and the insulation

materials of this appliance are ozone-

friendly.

• The insulation foam contains

flammable gas. Contact your municipal

authority for information on how to

discard the appliance correctly.

• Do not cause damage to the part of the

cooling unit that is near the heat

exchanger.

OPERATION

Switching on

1. Insert the plug into the wall socket.

2. Turn the Temperature regulator

clockwise to a medium setting.

Switching off

To turn off the appliance, turn the

temperature regulator to the "O" position.

Temperature regulation

The temperature is regulated

automatically.

1. Turn the Temperature regulator toward

lower settings to obtain the minimum

coldness.

2. Turn the Temperature regulator toward

higher settings to obtain the maximum

coldness.

A medium setting is generally

the most suitable.

However, the exact setting

should be chosen keeping in

mind that the temperature

inside the appliance depends

on:

• room temperature,

• how often the door is

opened,

• the quantity of food stored,

• the location of the appliance.

CAUTION! If the ambient

temperature is high or the

appliance is fully loaded, and

the appliance is set to the

lowest temperatures, it may run

continuously causing frost to

form on the rear wall. In this

case the dial must be set to a

higher temperature to allow

automatic defrosting and

therefore reduced energy

consumption.

DAILY USE

WARNING! Refer to Safety

chapters.

Cleaning the interior

Before using the appliance for the first

time, the interior and all internal

accessories should be washed with

lukewarm water and some neutral soap to

remove the typical smell of a brand-new

product, then dried thoroughly.

CAUTION! Do not use

detergents, abrasive powders,

chlorine or oil-based cleaners

as they will damage the finish.

Positioning the door shelves

To permit storage of food packages of

various sizes, the door shelves can be

placed at different heights.

1. Gradually pull the shelf in the direction

of the arrows until it comes free.

2. Reposition as required.

Movable shelves

The walls of the refrigerator are equipped

with a series of runners so that the

shelves can be positioned as desired.

Do not move the glass shelf

above the vegetable drawer to

ensure correct air circulation.

Freezing fresh food

The freezer compartment is suitable for

freezing fresh food and storing frozen and

deep-frozen food for a long time.

To freeze fresh foods it is not necessary to

change the medium setting.

However, for a faster freezing operation,

turn the temperature regulator toward

higher settings to obtain the maximum

coldness.

In this condition, the

refrigerator compartment

temperature might drop below

0°C. If this occurs reset the

temperature regulator to a

warmer setting.

Place the fresh food to be frozen in the

second compartment.

The maximum amount of food that can be

frozen in 24 hours is specified on the

rating plate, a label located on the inside

of the appliance.

The freezing process lasts 24 hours:

during this period do not add other food to

be frozen.

Storage of frozen food

When first starting-up or after a period out

of use, before putting the products in the

compartment let the appliance run at least

2 hours on the higher settings.

In the event of accidental

defrosting, for example due to

a power failure, if the power

has been off for longer than the

value shown in the technical

characteristics chart under

"rising time", the defrosted food

must be consumed quickly or

cooked immediately and then

re-frozen (after cooling).

Thawing

Deep-frozen or frozen food, prior to being

used, can be thawed in the refrigerator

compartment or at room temperature,

depending on the time available for this

operation.

Small pieces may even be cooked still

frozen, directly from the freezer: in this

case, cooking will take longer.

Ice-cube production

This appliance is equipped with one or

more trays for the production of ice-cubes.

Do not use metallic instruments

to remove the trays from the

freezer.

1. Fill these trays with water

2. Put the ice trays in the freezer

compartment.

Frozen Food Calendar

The symbols show different types of

frozen goods.

The numbers indicate storage times in

months for the appropriate types of frozen

goods. Whether the upper or lower value

of the indicated storage time is valid

depends on the quality of the foods and

treating before freezing.

HINTS AND TIPS

Normal operating sounds

The following sounds are normal during

operation:

• A faint gurgling and bubbling sound

from coils sound when refrigerant is

pumped.

• A whirring and pulsating sound from

the compressor when refrigerant is

pumped.

• A sudden cracking noise from inside

appliance caused by thermic dilatation

(a natural and not dangerous physical

phenomenon).

• A faint click noise from the temperature

regulator when the compressor

switches on or off.

Hints for energy saving

• Do not open the door frequently or

leave it open longer than absolutely

necessary.

• If the ambient temperature is high and

the Temperature Regulator is set to low

temperature and the appliance is fully

loaded, the compressor may run

continuously, causing frost or ice on the

evaporator. If this happens, set the

Temperature Regulator toward warmer

settings to allow automatic defrosting

and so a saving in electricity

consumption.

Hints for fresh food refrigeration

To obtain the best performance:

• do not store warm food or evaporating

liquids in the refrigerator

• do cover or wrap the food, particularly if

it has a strong flavour

• position food so that air can circulate

freely around it

Hints for refrigeration

Useful hints:

• Meat (all types): wrap in a suitable

packaging and place it on the glass

shelf above the vegetable drawer.

Store meat for at most 1-2 days.

• Cooked foods, cold dishes: cover and

place on any shelf.

• Fruit and vegetables: clean thoroughly

and place in a special drawer.

Bananas, potatoes, onions and garlic

must not be kept in the refrigerator if

not packed.

• Butter and cheese: place in a special

airtight container or wrap in an

aluminium foil or a polythene bag to

exclude as much air as possible.

• Bottles: close with a cap and place on

the door bottle shelf, or (if available) on

the bottle rack.

Hints for freezing

To help you make the most of the freezing

process, here are some important hints:

• the maximum quantity of food which

can be frozen in 24 hours is shown on

the rating plate;

• the freezing process takes 24 hours no

further food to be frozen should be

added during this period;

• freeze only top quality, fresh and

thoroughly cleaned, foodstuffs;

• prepare food in small portions to enable

it to be rapidly and completely frozen

and to make it possible subsequently to

thaw only the quantity required;

• wrap up the food in aluminium foil or

polythene and make sure that the

packages are airtight;

• do not allow fresh, unfrozen food to

touch food which is already frozen, thus

avoiding a rise in temperature of the

latter;

• lean foods store better and longer than

fatty ones; salt reduces the storage life

of food;

• water ices, if consumed immediately

after removal from the freezer

compartment, can possibly cause the

skin to be freeze burnt;

• it is advisable to show the freezing in

date on each individual pack to enable

you to keep tab of the storage time.

Hints for storage of frozen food

To obtain the best performance from this

appliance, you should:

• make sure that the commercially frozen

foodstuffs were adequately stored by

the retailer;

• be sure that frozen foodstuffs are

transferred from the foodstore to the

freezer in the shortest possible time;

• not open the door frequently or leave it

open longer than absolutely necessary;

• once defrosted, food deteriorates

rapidly and cannot be refrozen;

• do not exceed the storage period

indicated by the food manufacturer.

CARE AND CLEANING

WARNING! Refer to Safety

chapters.

General warnings

CAUTION! Unplug the

appliance before carrying out

any maintenance operation.

This appliance contains

hydrocarbons in its cooling unit;

maintenance and recharging

must therefore only be carried

out by authorized technicians.

The accessories and parts of

the appliance are not suitable

for washing in a dishwasher.

Periodic cleaning

CAUTION! Do not pull, move

or damage any pipes and/or

cables inside the cabinet.

CAUTION! Take care of not to

damage the cooling system.

CAUTION! When moving the

cabinet, lift it by the front edge

to avoid scratching the floor.

The equipment has to be cleaned

regularly:

1. Clean the inside and accessories with

lukewarm water and some neutral

soap.

2. Regularly check the door seals and

wipe clean to ensure they are clean

and free from debris.

3. Rinse and dry thoroughly.

4. If accessible, clean the condenser and

the compressor at the back of the

appliance with a brush.

This operation will improve the

performance of the appliance and save

electricity consumption.

Defrosting of the refrigerator

Frost is automatically eliminated from the

evaporator of the refrigerator compartment

every time the motor compressor stops,

during normal use. The defrost water

drains out through a trough into a special

container at the back of the appliance,

over the motor compressor, where it

evaporates.

It is important to periodically clean the

defrost water drain hole in the middle of

the refrigerator compartment channel to

prevent the water overflowing and dripping

onto the food inside.

Defrosting the freezer

CAUTION! Never use sharp

metal tools to scrape off frost

from the evaporator as you

could damage it. Do not use a

mechanical device or any

artificial means to speed up the

thawing process other than

those recommended by the

manufacturer. A temperature

rise of the frozen food packs,

during defrosting, may shorten

their safe storage life.

About 12 hours prior to

defrosting, set a lower

temperature, in order to build

up sufficient chill reserve for

the interruption in operation.

A certain amount of frost will always form

on the freezer shelves and around the top

compartment.

Defrost the freezer when the frost layer

reaches a thickness of about 3-5 mm.

1. Switch off the appliance, or pull out the

electrical plug from the wall socket.

2. Remove any stored food, wrap it in

several layers of newspaper and put it

in a cool place.

WARNING! Do not touch

frozen food with wet hands.

Hands can freeze to the

goods.

3. Leave the door open and protect the

floor from the defrosting water e.g. with

a cloth or a flat vessel.

In order to speed up the defrosting

process, place a pot of warm water in

the freezer compartment. In addition,

remove pieces of ice with an ice

scraper before defrosting is complete.

4. When defrosting is completed, dry the

interior thoroughly.

5. Switch on the appliance.

Wait at least 3 hours before putting the

food back into the freezer compartment.

Periods of non-operation

When the appliance is not in use for long

periods, take the following precautions:

1. Disconnect the appliance from

electricity supply.

2. Remove all food.

3. Defrost (if necessary) and clean the

appliance and all accessories.

4. Clean the appliance and all

accessories.

5. Leave the door/doors open to prevent

unpleasant smells.

WARNING! If you want to keep

the appliance switched on, ask

somebody to check it once in a

while to prevent the food inside

from spoiling in case of a

power failure.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

What to do if...

Problem Possible cause Solution

The appliance does not op‐

erate.

The appliance is switched

off.

Switch on the appliance.

The mains plug is not con‐

nected to the mains sock‐

et correctly.

Connect the mains plug to the

mains socket correctly.

There is no voltage in the

mains socket.

Connect a different electrical

appliance to the mains socket.

Contact a qualified electrician.

The appliance is noisy. The appliance is not sup‐

ported properly.

Check if the appliance stands

stable.

The lamp does not work. The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the lamp".

The compressor operates

continually.

Temperature is set incor‐

rectly.

Refer to "Operation".

Many food products were

put in at the same time.

Wait some hours and then

check the temperature again.

The room temperature is

too high.

Refer to climate class chart on

the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool to

room temperature before stor‐

ing.

The door is not closed cor‐

rectly.

Refer to "Closing the door".

There is too much frost and

ice.

The door is not closed cor‐

rectly or the gasket is de‐

formed/dirty.

Refer to "Closing the door".

Problem Possible cause Solution

The water drainage plug is

not correctly positioned.

Position the water drainage

plug in the correct way.

Food products are not

wrapped properly.

Wrap the food products better.

Temperature is set incor‐

rectly.

Refer to "Operation" .

Water flows on the rear

plate of the refrigerator.

During the automatic de‐

frosting process, frost

melts on the rear plate.

This is correct.

Water flows inside the refrig‐

erator.

The water outlet is clog‐

ged.

Clean the water outlet.

Food products prevent

that water flows into the

water collector.

Make sure that food products

do not touch the rear plate.

Water flows on the floor. The melting water outlet is

not connected to the evap‐

orative tray above the

compressor.

Attach the melting water outlet

to the evaporative tray.

The temperature in the ap‐

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera‐

ture.

The door is not closed cor‐

rectly.

Refer to "Closing the door".

The food products' tem‐

perature is too high.

Let the food products temper‐

ature decrease to room tem‐

perature before storage.

Many food products are

stored at the same time.

Store less food products at the

same time.

The thickness of the frost

is greater than 4-5 mm.

Defrost the appliance.

The door has been

opened often.

Open the door only if necessa‐

ry.

There is no cold air circu‐

lation in the appliance.

Make sure that there is cold

air circulation in the appliance.

If the advice does not lead to

the desired result, contact the

nearest Authorised Service

Centre.

Replacing the lamp

The appliance is equipped with

a long-life LED interior light.

It is strongly recommended to

use original spare parts only.

Use LED bulbs (E14 base)

only. The maximum power is

shown on the lamp unit.

CAUTION! Disconnect the plug

from the mains socket.

1. With your fingers, spread slightly both

sides of the transparent cover to

unhook them and detach the cover

pulling it in the direction of the arrows.

2. Replace the lamp with the one that has

identical characteristics and is

specifically designed for household

appliances.

3. Reassemble the lamp cover.

4. Connect the plug to the mains socket.

5. Open the door.

Make sure that the light switches on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

assembly instructions.

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

INSTALLATION

Location

Refer to the assembly

instructions for the installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

Positioning

Install the appliance in a dry, well

ventilated indoors where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance.

Cli‐

mate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Some functional problems

might occur for some types of

models when operating outside

of that range. The correct

operation can only be

guaranteed within the specified

temperature range. If you have

any doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

Electrical Connection

CAUTION! Any electrical work

required to install this appliance

should be carried out by a

qualified electrician or

competent person.

WARNING! This appliance

must be earthed.

The manufacturer declines any

liability should these safety

measures not be observed.

The wires in the mains lead are coloured

in accordance with the following code:

A B

• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral

As the colours of the wires in the mains

lead of this appliance may not correspond

with the coloured markings identifying the

terminals in your plug, proceed as follows:

1. Connect the wire coloured green and

yellow to the terminal marked either

with the letter “E“ or by the earth

symbol or coloured green and

yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter

“N“ or coloured black.

3. Connect the wire coloured brown to

the terminal either marked with the

“L“ or coloured red.

4. Check that no cut, or stray strands of

wire is present and the cord clamp (E)

is secure over the outer sheath.

Make sure the electricity supply

voltage is the same as that indicated

on the appliance rating plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp

fuse (B). In the event of having to change

the fuse in the plug supplied, a 13 amp

ASTA approved (BS 1362) fuse must be

used.

WARNING! A cut off plug

inserted into a 13 amp socket

is a serious safety (shock)

hazard. Ensure that it is

disposed of safely.

Ventilation requirements

The airflow behind the appliance must be

sufficient.

5 cm

min.

200 cm

min.

200 cm

CAUTION! Refer to the

assembly instructions for the

installation.

TECHNICAL DATA

Technical data

Dimensions of the recess

Height mm 1780

Width mm 560

Depth mm 550

Rising time Hours 22

Voltage Volts 230 - 240

Frequency Hz 50

The technical information is situated in the

rating plate, on the external or internal

side of the appliance and in the energy

label.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol . Put

the packaging in relevant containers to

recycle it. Help protect the environment

and human health by recycling waste of

electrical and electronic appliances. Do

not dispose of appliances marked with the

symbol with the household waste.

Return the product to your local recycling

facility or contact your municipal office.

INDICE

Informazioni di sicurezza 15

Istruzioni di sicurezza 16

Funzionamento 18

Utilizzo quotidiano 19

Consigli e suggerimenti utili 21

Pulizia e cura 22

Risoluzione dei problemi 24

Installazione 27

Dati tecnici 28

Con riserva di modifiche.

INFORMAZIONI DI SICUREZZA

Leggere attentamente le istruzioni fornite prima di installare

e utilizzare l'apparecchiatura. I produttori non sono

responsabili di eventuali lesioni o danni derivanti da

un'installazione o un uso scorretti. Conservare sempre le

istruzioni in un luogo sicuro e accessibile per poterle

consultare in futuro.

Sicurezza dei bambini e delle persone vulnerabili

• Questa apparecchiatura può essere usata da bambini a

partire dagli 8 anni e da adulti con limitate capacità fisiche,

sensoriali o mentali o con scarsa esperienza o conoscenza

sull'uso dell'apparecchiatura, solamente se sorvegliati o se

istruiti relativamente all'uso dell'apparecchiatura e se

hanno compreso i rischi coinvolti.

• Non consentire ai bambini di giocare con

l'apparecchiatura.

• I bambini non devono eseguire interventi di pulizia e

manutenzione sull'apparecchiatura senza essere

supervisionati.

• Tenere gli imballaggi lontano dai bambini e smaltirli in

modo adeguato.

Avvertenze di sicurezza generali

• L'apparecchiatura è destinata all'uso domestico e

applicazioni simili, tra cui:

– case di campagna; cucine di negozi, uffici e altri

ambienti di lavoro

– clienti di hotel, motel, bed and breakfast e altri ambienti

residenziali

• Verificare che le aperture di ventilazione, sia

sull'apparecchiatura che nella struttura da incasso, non

siano ostruite.

• Non usare dispositivi elettrici o altri mezzi artificiali non

raccomandati dal produttore allo scopo di accelerare il

processo di sbrinamento.

• Non danneggiare il circuito refrigerante.

• Non utilizzare apparecchiature elettriche all'interno dei

comparti di conservazione degli alimenti, ad eccezione di

quelli consigliati dal costruttore.

• Non nebulizzare acqua né utilizzare vapore per pulire

l'apparecchiatura.

• Pulire l'apparecchiatura con un panno inumidito e morbido.

Utilizzare solo detergenti neutri. Non usare prodotti

abrasivi, spugnette abrasive, solventi od oggetti metallici.

• Non conservare in questa apparecchiatura sostanze

esplosive come bombolette spray contenenti un

propellente infiammabile.

• Se il cavo di alimentazione è danneggiato, deve essere

sostituito dal produttore, da un tecnico autorizzato o da

una persona qualificata per evitare situazioni di pericolo.

ISTRUZIONI DI SICUREZZA

Installazione

AVVERTENZA! L’installazione

dell'apparecchiatura deve

essere eseguita da personale

qualificato.

• Togliere tutto l'imballaggio e i bulloni

per il trasporto.

• Non installare o utilizzare

l'apparecchiatura se è danneggiata.

• Attenersi alle istruzioni fornite insieme

all'apparecchiatura.

• Prestare sempre attenzione in fase di

spostamento dell'apparecchiatura, dato

che è pesante. Usare sempre i guanti

di sicurezza e le calzature adeguate.

• Assicurarsi che l'aria possa circolare

liberamente attorno all'apparecchiatura.

• In fase di prima installazione o dopo

aver girato la porta, attendere almeno 4

ore prima di collegare l'apparecchiatura

alla sorgente di alimentazione. Questo

serve a consentire all'olio di fluire

nuovamente nel compressore.

• Prima di eseguire eventuali operazioni

sull'apparecchiatura (ad esempio

invertire la porta), togliere la spina dalla

presa di corrente.

• Non installare l'apparecchiatura in

prossimità di radiatori, fornelli, forni o

piani di cottura.

• Non installare l'apparecchiatura dove

sia esposta alla luce solare diretta.

• Non installare questa apparecchiatura

in luoghi troppo umidi o freddi, come

aggiunte strutturali, garage o cantine.

• Quando si sposta l'apparecchiatura,

sollevarla dal bordo anteriore, così da

non graffiare il pavimento.

• L'apparecchiatura contiene un

sacchetto di essiccante. Questo

prodotto non è un giocattolo. Questo

prodotto non è un alimento. Smaltirlo

immediatamente.

Collegamento elettrico

AVVERTENZA! Rischio di

incendio e scossa elettrica.

• L'apparecchiatura deve disporre di una

messa a terra.

• Verificare che i parametri sulla

targhetta siano compatibili con le

indicazioni elettriche dell'alimentazione.

• Utilizzare sempre una presa elettrica

con contatto di protezione

correttamente installata.

• Non utilizzare prese multiple e

prolunghe.

• Accertarsi di non danneggiare i

componenti elettrici (ad es. la spina di

alimentazione, il cavo di alimentazione,

il compressore). Contattare il Centro di

Assistenza Autorizzato o un elettricista

per sostituire i componenti elettrici.

• Il cavo di alimentazione deve rimanere

sotto il livello della spina di

alimentazione.

• Inserire la spina di alimentazione nella

presa solo al termine dell'installazione.

Verificare che la spina di alimentazione

rimanga accessibile dopo

l'installazione.

• Non tirare il cavo di alimentazione per

scollegare l’apparecchiatura. Tirare

sempre dalla spina.

Utilizzo

AVVERTENZA! Rischio di

lesioni, scottature o scosse

elettriche.

• Non modificare le specifiche tecniche

dell'apparecchiatura.

• Non introdurre apparecchiature

elettriche (ad es. gelatiere)

nell'apparecchiatura se non

specificamente consentito dal

produttore.

• Fare attenzione a non danneggiare il

circuito refrigerante. Esso contiene

isobutano (R600a), un gas naturale con

un alto livello di compatibilità

ambientale, tuttavia il gas è

infiammabile.

• Nel caso di danno al circuito

refrigerante, assicurarsi che non si

sviluppino fiamme libere e scintille nel

locale. Aerare bene l'ambiente.

• Non appoggiare oggetti incandescenti

sulle parti in plastica

dell'apparecchiatura.

• Non introdurre bevande analcoliche nel

vano congelatore. Si verrà a creare una

pressione nel contenitore della

bevanda.

• Non conservare gas e liquidi

infiammabili nell'apparecchiatura.

• Non appoggiare o tenere liquidi o

materiali infiammabili, né oggetti

facilmente incendiabili

sull'apparecchiatura, al suo interno o

nelle immediate vicinanze.

• Non toccare il compressore o il

condensatore. Sono incandescenti.

• Non togliere o toccare gli oggetti nel

vano congelatore con le mani bagnate

o umide.

• Non ricongelare del cibo

precedentemente scongelato.

• Attenersi alle istruzioni per la

conservazione riportate sulla

confezione del cibo surgelato.

Luce interna

AVVERTENZA! Pericolo di

scosse elettriche.

• Il tipo di lampada utilizzata per questa

apparecchiatura è adatta soltanto agli

elettrodomestici. Non usarle per

l'illuminazione di casa.

Pulizia e cura

AVVERTENZA! Vi è il rischio

di ferirsi o danneggiare

l'apparecchiatura.

• Prima di eseguire qualunque intervento

di manutenzione, spegnere

l'apparecchiatura ed estrarre la spina

dalla presa.

• L'unità refrigerante di questa

apparecchiatura contiene idrocarburi.

L’unità deve essere ricaricata ed

ispezionata esclusivamente da

personale qualificato.

• Controllare regolarmente lo scarico

dell'apparecchiatura e, se necessario,

pulirlo. L'ostruzione dello scarico può

causare un deposito di acqua di

sbrinamento sul fondo

dell'apparecchiatura.

Smaltimento

AVVERTENZA! Rischio di

lesioni o soffocamento.

• Staccare la spina dall'alimentazione

elettrica.

• Tagliare il cavo di rete e smaltirlo.

• Rimuovere la porta per evitare che

bambini e animali domestici rimangano

chiusi all’interno dell’apparecchiatura.

• Il circuito refrigerante e i materiali di

isolamento di questa apparecchiatura

rispettano l'ozono.

• La schiuma isolante contiene gas

infiammabili. Contattare le autorità

locali per ricevere informazioni su come

smaltire correttamente

l'apparecchiatura.

• Non danneggiare i componenti

dell'unità refrigerante che si trovano

vicino allo scambiatore di calore.

FUNZIONAMENTO

Accensione

1. Inserire la spina nella presa a muro.

2. Impostare il regolatore di temperatura

su un livello medio, ruotandolo in

senso orario.

Spegnimento

Per spegnere l’apparecchiatura, ruotare il

regolatore di temperatura in posizione "O".

Regolazione della temperatura

La temperatura viene regolata

automaticamente.

1. Impostare il regolatore di temperatura

su un livello basso per ottenere un

raffreddamento minimo.

2. Ruotare il regolatore di temperatura

verso l'impostazione massima per

aumentare l'intensità del

raffreddamento.

In condizioni normali, si

consiglia di utilizzare una

regolazione media.

Tuttavia, è importante ricordare

che la temperatura all'interno

dell'apparecchiatura dipende

dai seguenti fattori:

• temperatura ambiente,

• frequenza di apertura della

porta,

• quantità di alimenti

conservati,

• Posizione

dell'apparecchiatura.

ATTENZIONE! Se la

temperatura ambiente è

elevata o l'apparecchiatura è a

pieno carico, l'impostazione

alla temperatura minima può

causare l'attivazione ininterrotta

del compressore e la

formazione di brina sulla parete

posteriore. In questo caso,

impostare una temperatura più

elevata per consentire lo

sbrinamento automatico e

ridurre così il consumo di

energia.

UTILIZZO QUOTIDIANO

AVVERTENZA! Fare

riferimento ai capitoli sulla

sicurezza.

Pulizia dell'interno

Prima di utilizzare l'apparecchiatura per la

prima volta, lavare l'interno e gli accessori

con acqua tiepida e sapone neutro per

eliminare il tipico odore dei prodotti nuovi,

quindi asciugare accuratamente.

ATTENZIONE! Non usare

detergenti, polveri abrasive,

detergenti a base di cloro od

olio, dato che potrebbero

danneggiare le finiture.

Posizionamento dei ripiani della

porta

Per facilitare l'introduzione di alimenti di

diverse dimensioni, i ripiani della porta

possono essere posizionati ad altezze

differenti.

1. Tirare gradualmente il ripiano nella

direzione indicata dalle frecce fino a

sbloccarlo.

2. Riposizionare secondo necessità.

Ripiani rimovibili

Le guide presenti sulle pareti del

frigorifero permettono di posizionare i

ripiani a diverse altezze.

Per garantire una corretta

circolazione dell'aria, non

spostare il ripiano in vetro

posto sopra il cassetto delle

verdure.

Congelamento di alimenti

freschi

Lo scomparto congelatore è adatto al

congelamento di alimenti freschi e alla

conservazione a lungo termine di alimenti

congelati e surgelati.

Per congelare i cibi freschi è possibile

mantenere la regolazione media.

Tuttavia, per ottenere un congelamento

più rapido, è possibile impostare il

regolatore di temperatura a un livello più

alto per aumentare l'intensità di

raffreddamento.

In questa condizione la

temperatura del vano frigorifero

potrebbe scendere al di sotto di

0°C. Qualora ciò accadesse, è

necessario reimpostare la

temperatura a un livello più

alto.

Riporre i cibi freschi da congelare nel

secondo scomparto.

La quantità massima di alimenti

congelabili in 24 ore è riportata sulla

targhetta dei dati, un'etichetta presente

sulle pareti interne dell'apparecchiatura.

Il processo di congelamento dura 24 ore:

non aggiungere altri alimenti da congelare

per tutta la durata del processo.

Conservazione dei surgelati

Al primo avvio o dopo un periodo di non

utilizzo, lasciare in funzione

l'apparecchiatura per almeno 2 ore con

una regolazione alta prima di introdurre gli

alimenti.

Se si verifica un'interruzione

della corrente elettrica di durata

superiore al "tempo di risalita"

indicato nella tabella dei dati

tecnici, il cibo scongelato deve

essere consumato rapidamente

o cucinato immediatamente e

quindi ricongelato (dopo il

raffreddamento).

Scongelamento

Prima dell'utilizzo, i cibi surgelati o

congelati possono essere scongelati nel

vano frigorifero o, per un processo più

veloce, a temperatura ambiente.

Gli alimenti divisi in piccole porzioni

possono essere cucinati direttamente,

senza essere prima scongelati: in questo

caso, tuttavia, la cottura durerà più a

lungo.

Produzione di cubetti di

ghiaccio

Questa apparecchiatura è dotata di una o

più vaschette per la produzione di cubetti

di ghiaccio.

Non usare strumenti metallici

per estrarre le vaschette dal

vano congelatore.

1. Riempire d’acqua le vaschette

2. Introdurre le vaschette per il ghiaccio

nel vano congelatore.

Calendario cibi congelati

I simboli mostrano i diversi tipi di cibi

congelati.

La pagina sta caricando ...

Smeg UKC3170P1 Manuale utente

Marca: Smeg

Modello: UKC3170P1

Categoria: Frigo-congelatori

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Smeg UKC3170P1 User manual

Smeg UKC3170P1 Manuale utente

Smeg UKC3170P1 Manuale utente

in altre lingue

Documenti correlati

Altri documenti